Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

1 files changed, 24 insertions, 7 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ff73395623..f55c49475a8c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@ config SERIAL_SAMSUNG
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS_4
+	bool
+	depends on ARM && PLAT_SAMSUNG
+	default y if CPU_S3C2443
+	help
+	  Internal node for the common case of 4 Samsung compatible UARTs
+
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+	tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400 and S3C6410
+	  Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
 	  SoCs
 
 config SERIAL_S5PC100
 	tristate "Samsung S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
 	  Serial port support for the Samsung S5PC100 SoCs
 
+config SERIAL_S5PV210
+	tristate "Samsung S5PV210 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	default y
+	help
+	  Serial port support for Samsung's S5P Family of SoC's
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
@@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || H8300)
+	depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS