diff options
| author | Jason Wessel <jason.wessel@windriver.com> | 2008-04-17 20:05:37 +0200 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2008-04-17 20:05:37 +0200 |
| commit | f2d937f3bf00665ccf048b3b6616ef95859b0945 (patch) | |
| tree | 6136ded0706be0d39a09a0a912e8f79a4ab63322 /drivers/serial/8250.c | |
| parent | dc7d552705215ac50a0617fcf51bb9c736255b8e (diff) | |
| download | linux-f2d937f3bf00665ccf048b3b6616ef95859b0945.tar.bz2 | |
consoles: polling support, kgdboc
polled console handling support, to access a console in an irq-less
way while in debug or irq context.
absolutely zero impact as long as CONFIG_CONSOLE_POLL is disabled.
(which is the default)
[ jan.kiszka@siemens.com: lots of cleanups ]
[ mingo@elte.hu: redesign, splitups, cleanups. ]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'drivers/serial/8250.c')
| -rw-r--r-- | drivers/serial/8250.c | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 77f7a7f0646e..96a585e1cee8 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1740,6 +1740,60 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) } } +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial8250_get_poll_char(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned char lsr = serial_inp(up, UART_LSR); + + while (!(lsr & UART_LSR_DR)) + lsr = serial_inp(up, UART_LSR); + + return serial_inp(up, UART_RX); +} + + +static void serial8250_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_8250_port *up = (struct uart_8250_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + wait_for_xmitr(up, BOTH_EMPTY); + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, c); + if (c == 10) { + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_TX, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + static int serial8250_startup(struct uart_port *port) { struct uart_8250_port *up = (struct uart_8250_port *)port; @@ -2386,6 +2440,10 @@ static struct uart_ops serial8250_pops = { .request_port = serial8250_request_port, .config_port = serial8250_config_port, .verify_port = serial8250_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, +#endif }; static struct uart_8250_port serial8250_ports[UART_NR]; |