Merge branch '4.7/scsi-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi into for-4.7-zac

Pulling in the dependencies for further ZAC changes.

Signed-off-by: Tejun Heo <tj@kernel.org>

95 files changed, 4084 insertions, 6269 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index e80768f8e579..98e5d51a3346 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -17,6 +17,7 @@ config SCSI
 	tristate "SCSI device support"
 	depends on BLOCK
 	select SCSI_DMA if HAS_DMA
+	select SG_POOL
 	---help---
 	  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
 	  any other SCSI device under Linux, say Y and make sure that you know
@@ -202,12 +203,12 @@ config SCSI_ENCLOSURE
 	  certain enclosure conditions to be reported and is not required.
 
 config SCSI_CONSTANTS
-	bool "Verbose SCSI error reporting (kernel size +=75K)"
+	bool "Verbose SCSI error reporting (kernel size += 36K)"
 	depends on SCSI
 	help
 	  The error messages regarding your SCSI hardware will be easier to
 	  understand if you say Y here; it will enlarge your kernel by about
-	  75 KB. If in doubt, say Y.
+	  36 KB. If in doubt, say Y.
 
 config SCSI_LOGGING
 	bool "SCSI logging facility"
@@ -813,17 +814,6 @@ config SCSI_GENERIC_NCR5380_MMIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called g_NCR5380_mmio.
 
-config SCSI_GENERIC_NCR53C400
-	bool "Enable NCR53c400 extensions"
-	depends on SCSI_GENERIC_NCR5380
-	help
-	  This enables certain optimizations for the NCR53c400 SCSI cards.
-	  You might as well try it out.  Note that this driver will only probe
-	  for the Trantor T130B in its default configuration; you might have
-	  to pass a command line option to the kernel at boot time if it does
-	  not detect your card.  See the file
-	  <file:Documentation/scsi/g_NCR5380.txt> for details.
-
 config SCSI_IPS
 	tristate "IBM ServeRAID support"
 	depends on PCI && SCSI
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 3eff2a69fe08..43908bbb3b23 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -29,29 +29,9 @@
  * Ronald van Cuijlenborg, Alan Cox and others.
  */
 
-/*
- * Further development / testing that should be done :
- * 1.  Cleanup the NCR5380_transfer_dma function and DMA operation complete
- * code so that everything does the same thing that's done at the
- * end of a pseudo-DMA read operation.
- *
- * 2.  Fix REAL_DMA (interrupt driven, polled works fine) -
- * basically, transfer size needs to be reduced by one
- * and the last byte read as is done with PSEUDO_DMA.
- *
- * 4.  Test SCSI-II tagged queueing (I have no devices which support
- * tagged queueing)
- */
+/* Ported to Atari by Roman Hodek and others. */
 
-#ifndef notyet
-#undef REAL_DMA
-#endif
-
-#ifdef BOARD_REQUIRES_NO_DELAY
-#define io_recovery_delay(x)
-#else
-#define io_recovery_delay(x)	udelay(x)
-#endif
+/* Adapted for the Sun 3 by Sam Creasey. */
 
 /*
  * Design
@@ -126,17 +106,10 @@
  * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
  * transceivers.
  *
- * DONT_USE_INTR - if defined, never use interrupts, even if we probe or
- * override-configure an IRQ.
- *
  * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
  *
  * REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
  *
- * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't
- * rely on phase mismatch and EOP interrupts to determine end
- * of phase.
- *
  * These macros MUST be defined :
  *
  * NCR5380_read(register)  - read from the specified register
@@ -147,29 +120,29 @@
  * specific implementation of the NCR5380
  *
  * Either real DMA *or* pseudo DMA may be implemented
- * REAL functions :
- * NCR5380_REAL_DMA should be defined if real DMA is to be used.
- * Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
- *
- * Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
  *
  * NCR5380_dma_write_setup(instance, src, count) - initialize
  * NCR5380_dma_read_setup(instance, dst, count) - initialize
  * NCR5380_dma_residual(instance); - residual count
  *
- * PSEUDO functions :
- * NCR5380_pwrite(instance, src, count)
- * NCR5380_pread(instance, dst, count);
- *
  * The generic driver is initialized by calling NCR5380_init(instance),
  * after setting the appropriate host specific fields and ID.  If the
  * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
  * possible) function may be used.
  */
 
+#ifndef NCR5380_io_delay
+#define NCR5380_io_delay(x)
+#endif
+
+#ifndef NCR5380_acquire_dma_irq
+#define NCR5380_acquire_dma_irq(x)	(1)
+#endif
+
+#ifndef NCR5380_release_dma_irq
+#define NCR5380_release_dma_irq(x)
+#endif
+
 static int do_abort(struct Scsi_Host *);
 static void do_reset(struct Scsi_Host *);
 
@@ -280,12 +253,20 @@ static struct {
 	{0, NULL}
 },
 basrs[] = {
+	{BASR_END_DMA_TRANSFER, "END OF DMA"},
+	{BASR_DRQ, "DRQ"},
+	{BASR_PARITY_ERROR, "PARITY ERROR"},
+	{BASR_IRQ, "IRQ"},
+	{BASR_PHASE_MATCH, "PHASE MATCH"},
+	{BASR_BUSY_ERROR, "BUSY ERROR"},
 	{BASR_ATN, "ATN"},
 	{BASR_ACK, "ACK"},
 	{0, NULL}
 },
 icrs[] = {
 	{ICR_ASSERT_RST, "ASSERT RST"},
+	{ICR_ARBITRATION_PROGRESS, "ARB. IN PROGRESS"},
+	{ICR_ARBITRATION_LOST, "LOST ARB."},
 	{ICR_ASSERT_ACK, "ASSERT ACK"},
 	{ICR_ASSERT_BSY, "ASSERT BSY"},
 	{ICR_ASSERT_SEL, "ASSERT SEL"},
@@ -294,14 +275,14 @@ icrs[] = {
 	{0, NULL}
 },
 mrs[] = {
-	{MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
-	{MR_TARGET, "MODE TARGET"},
-	{MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
-	{MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
-	{MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
-	{MR_MONITOR_BSY, "MODE MONITOR BSY"},
-	{MR_DMA_MODE, "MODE DMA"},
-	{MR_ARBITRATE, "MODE ARBITRATION"},
+	{MR_BLOCK_DMA_MODE, "BLOCK DMA MODE"},
+	{MR_TARGET, "TARGET"},
+	{MR_ENABLE_PAR_CHECK, "PARITY CHECK"},
+	{MR_ENABLE_PAR_INTR, "PARITY INTR"},
+	{MR_ENABLE_EOP_INTR, "EOP INTR"},
+	{MR_MONITOR_BSY, "MONITOR BSY"},
+	{MR_DMA_MODE, "DMA MODE"},
+	{MR_ARBITRATE, "ARBITRATE"},
 	{0, NULL}
 };
 
@@ -322,23 +303,23 @@ static void NCR5380_print(struct Scsi_Host *instance)
 	icr = NCR5380_read(INITIATOR_COMMAND_REG);
 	basr = NCR5380_read(BUS_AND_STATUS_REG);
 
-	printk("STATUS_REG: %02x ", status);
+	printk(KERN_DEBUG "SR =   0x%02x : ", status);
 	for (i = 0; signals[i].mask; ++i)
 		if (status & signals[i].mask)
-			printk(",%s", signals[i].name);
-	printk("\nBASR: %02x ", basr);
+			printk(KERN_CONT "%s, ", signals[i].name);
+	printk(KERN_CONT "\nBASR = 0x%02x : ", basr);
 	for (i = 0; basrs[i].mask; ++i)
 		if (basr & basrs[i].mask)
-			printk(",%s", basrs[i].name);
-	printk("\nICR: %02x ", icr);
+			printk(KERN_CONT "%s, ", basrs[i].name);
+	printk(KERN_CONT "\nICR =  0x%02x : ", icr);
 	for (i = 0; icrs[i].mask; ++i)
 		if (icr & icrs[i].mask)
-			printk(",%s", icrs[i].name);
-	printk("\nMODE: %02x ", mr);
+			printk(KERN_CONT "%s, ", icrs[i].name);
+	printk(KERN_CONT "\nMR =   0x%02x : ", mr);
 	for (i = 0; mrs[i].mask; ++i)
 		if (mr & mrs[i].mask)
-			printk(",%s", mrs[i].name);
-	printk("\n");
+			printk(KERN_CONT "%s, ", mrs[i].name);
+	printk(KERN_CONT "\n");
 }
 
 static struct {
@@ -477,52 +458,18 @@ static void prepare_info(struct Scsi_Host *instance)
 	         instance->base, instance->irq,
 	         instance->can_queue, instance->cmd_per_lun,
 	         instance->sg_tablesize, instance->this_id,
-	         hostdata->flags & FLAG_NO_DMA_FIXUP  ? "NO_DMA_FIXUP "  : "",
+	         hostdata->flags & FLAG_DMA_FIXUP     ? "DMA_FIXUP "     : "",
 	         hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
 	         hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY "  : "",
-#ifdef AUTOPROBE_IRQ
-	         "AUTOPROBE_IRQ "
-#endif
 #ifdef DIFFERENTIAL
 	         "DIFFERENTIAL "
 #endif
-#ifdef REAL_DMA
-	         "REAL_DMA "
-#endif
-#ifdef REAL_DMA_POLL
-	         "REAL_DMA_POLL "
-#endif
 #ifdef PARITY
 	         "PARITY "
 #endif
-#ifdef PSEUDO_DMA
-	         "PSEUDO_DMA "
-#endif
 	         "");
 }
 
-#ifdef PSEUDO_DMA
-static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
-	char *buffer, int length)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	hostdata->spin_max_r = 0;
-	hostdata->spin_max_w = 0;
-	return 0;
-}
-
-static int __maybe_unused NCR5380_show_info(struct seq_file *m,
-                                            struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
-	        hostdata->spin_max_w, hostdata->spin_max_r);
-	return 0;
-}
-#endif
-
 /**
  * NCR5380_init - initialise an NCR5380
  * @instance: adapter to configure
@@ -543,6 +490,8 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
 	int i;
 	unsigned long deadline;
 
+	instance->max_lun = 7;
+
 	hostdata->host = instance;
 	hostdata->id_mask = 1 << instance->this_id;
 	hostdata->id_higher_mask = 0;
@@ -551,9 +500,8 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
 			hostdata->id_higher_mask |= i;
 	for (i = 0; i < 8; ++i)
 		hostdata->busy[i] = 0;
-#ifdef REAL_DMA
-	hostdata->dmalen = 0;
-#endif
+	hostdata->dma_len = 0;
+
 	spin_lock_init(&hostdata->lock);
 	hostdata->connected = NULL;
 	hostdata->sensing = NULL;
@@ -719,6 +667,9 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
 
 	cmd->result = 0;
 
+	if (!NCR5380_acquire_dma_irq(instance))
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 	spin_lock_irqsave(&hostdata->lock, flags);
 
 	/*
@@ -743,6 +694,19 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
 	return 0;
 }
 
+static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
+{
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+	/* Caller does the locking needed to set & test these data atomically */
+	if (list_empty(&hostdata->disconnected) &&
+	    list_empty(&hostdata->unissued) &&
+	    list_empty(&hostdata->autosense) &&
+	    !hostdata->connected &&
+	    !hostdata->selecting)
+		NCR5380_release_dma_irq(instance);
+}
+
 /**
  * dequeue_next_cmd - dequeue a command for processing
  * @instance: the scsi host instance
@@ -844,17 +808,14 @@ static void NCR5380_main(struct work_struct *work)
 
 			if (!NCR5380_select(instance, cmd)) {
 				dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
+				maybe_release_dma_irq(instance);
 			} else {
 				dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
 				         "main: select failed, returning %p to queue\n", cmd);
 				requeue_cmd(instance, cmd);
 			}
 		}
-		if (hostdata->connected
-#ifdef REAL_DMA
-		    && !hostdata->dmalen
-#endif
-		    ) {
+		if (hostdata->connected && !hostdata->dma_len) {
 			dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
 			NCR5380_information_transfer(instance);
 			done = 0;
@@ -865,7 +826,88 @@ static void NCR5380_main(struct work_struct *work)
 	} while (!done);
 }
 
-#ifndef DONT_USE_INTR
+/*
+ * NCR5380_dma_complete - finish DMA transfer
+ * @instance: the scsi host instance
+ *
+ * Called by the interrupt handler when DMA finishes or a phase
+ * mismatch occurs (which would end the DMA transfer).
+ */
+
+static void NCR5380_dma_complete(struct Scsi_Host *instance)
+{
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
+	int transferred;
+	unsigned char **data;
+	int *count;
+	int saved_data = 0, overrun = 0;
+	unsigned char p;
+
+	if (hostdata->read_overruns) {
+		p = hostdata->connected->SCp.phase;
+		if (p & SR_IO) {
+			udelay(10);
+			if ((NCR5380_read(BUS_AND_STATUS_REG) &
+			     (BASR_PHASE_MATCH | BASR_ACK)) ==
+			    (BASR_PHASE_MATCH | BASR_ACK)) {
+				saved_data = NCR5380_read(INPUT_DATA_REG);
+				overrun = 1;
+				dsprintk(NDEBUG_DMA, instance, "read overrun handled\n");
+			}
+		}
+	}
+
+#ifdef CONFIG_SUN3
+	if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
+		pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
+		       instance->host_no);
+		BUG();
+	}
+
+	if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
+	    (BASR_PHASE_MATCH | BASR_ACK)) {
+		pr_err("scsi%d: BASR %02x\n", instance->host_no,
+		       NCR5380_read(BUS_AND_STATUS_REG));
+		pr_err("scsi%d: bus stuck in data phase -- probably a single byte overrun!\n",
+		       instance->host_no);
+		BUG();
+	}
+#endif
+
+	NCR5380_write(MODE_REG, MR_BASE);
+	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+	transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
+	hostdata->dma_len = 0;
+
+	data = (unsigned char **)&hostdata->connected->SCp.ptr;
+	count = &hostdata->connected->SCp.this_residual;
+	*data += transferred;
+	*count -= transferred;
+
+	if (hostdata->read_overruns) {
+		int cnt, toPIO;
+
+		if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
+			cnt = toPIO = hostdata->read_overruns;
+			if (overrun) {
+				dsprintk(NDEBUG_DMA, instance,
+				         "Got an input overrun, using saved byte\n");
+				*(*data)++ = saved_data;
+				(*count)--;
+				cnt--;
+				toPIO--;
+			}
+			if (toPIO > 0) {
+				dsprintk(NDEBUG_DMA, instance,
+				         "Doing %d byte PIO to 0x%p\n", cnt, *data);
+				NCR5380_transfer_pio(instance, &p, &cnt, data);
+				*count -= toPIO - cnt;
+			}
+		}
+	}
+}
 
 /**
  * NCR5380_intr - generic NCR5380 irq handler
@@ -901,7 +943,7 @@ static void NCR5380_main(struct work_struct *work)
  * the Busy Monitor interrupt is enabled together with DMA Mode.
  */
 
-static irqreturn_t NCR5380_intr(int irq, void *dev_id)
+static irqreturn_t __maybe_unused NCR5380_intr(int irq, void *dev_id)
 {
 	struct Scsi_Host *instance = dev_id;
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
@@ -919,7 +961,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
 		dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
 		         irq, basr, sr, mr);
 
-#if defined(REAL_DMA)
 		if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
 			/* Probably End of DMA, Phase Mismatch or Loss of BSY.
 			 * We ack IRQ after clearing Mode Register. Workarounds
@@ -928,26 +969,14 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
 
 			dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
 
-			int transferred;
-
-			if (!hostdata->connected)
-				panic("scsi%d : DMA interrupt with no connected cmd\n",
-				      instance->hostno);
-
-			transferred = hostdata->dmalen - NCR5380_dma_residual(instance);
-			hostdata->connected->SCp.this_residual -= transferred;
-			hostdata->connected->SCp.ptr += transferred;
-			hostdata->dmalen = 0;
-
-			/* FIXME: we need to poll briefly then defer a workqueue task ! */
-			NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2 * HZ);
-
-			NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-			NCR5380_write(MODE_REG, MR_BASE);
-			NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-		} else
-#endif /* REAL_DMA */
-		if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
+			if (hostdata->connected) {
+				NCR5380_dma_complete(instance);
+				queue_work(hostdata->work_q, &hostdata->main_task);
+			} else {
+				NCR5380_write(MODE_REG, MR_BASE);
+				NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+			}
+		} else if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
 		    (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
 			/* Probably reselected */
 			NCR5380_write(SELECT_ENABLE_REG, 0);
@@ -966,10 +995,16 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
 			NCR5380_read(RESET_PARITY_INTERRUPT_REG);
 
 			dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
+#ifdef SUN3_SCSI_VME
+			dregs->csr |= CSR_DMA_ENABLE;
+#endif
 		}
 		handled = 1;
 	} else {
 		shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
+#ifdef SUN3_SCSI_VME
+		dregs->csr |= CSR_DMA_ENABLE;
+#endif
 	}
 
 	spin_unlock_irqrestore(&hostdata->lock, flags);
@@ -977,8 +1012,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-#endif
-
 /*
  * Function : int NCR5380_select(struct Scsi_Host *instance,
  * struct scsi_cmnd *cmd)
@@ -1217,14 +1250,6 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	 * was true but before BSY was false during selection, the information
 	 * transfer phase should be a MESSAGE OUT phase so that we can send the
 	 * IDENTIFY message.
-	 *
-	 * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG
-	 * message (2 bytes) with a tag ID that we increment with every command
-	 * until it wraps back to 0.
-	 *
-	 * XXX - it turns out that there are some broken SCSI-II devices,
-	 * which claim to support tagged queuing but fail when more than
-	 * some number of commands are issued at once.
 	 */
 
 	/* Wait for start of REQ/ACK handshake */
@@ -1247,9 +1272,6 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun);
 
 	len = 1;
-	cmd->tag = 0;
-
-	/* Send message(s) */
 	data = tmp;
 	phase = PHASE_MSGOUT;
 	NCR5380_transfer_pio(instance, &phase, &len, &data);
@@ -1259,6 +1281,10 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	hostdata->connected = cmd;
 	hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun;
 
+#ifdef SUN3_SCSI_VME
+	dregs->csr |= CSR_INTR;
+#endif
+
 	initialize_SCp(cmd);
 
 	cmd = NULL;
@@ -1495,7 +1521,6 @@ timeout:
 	return -1;
 }
 
-#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL)
 /*
  * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
  * unsigned char *phase, int *count, unsigned char **data)
@@ -1520,53 +1545,47 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 				unsigned char **data)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	register int c = *count;
-	register unsigned char p = *phase;
-	register unsigned char *d = *data;
+	int c = *count;
+	unsigned char p = *phase;
+	unsigned char *d = *data;
 	unsigned char tmp;
-	int foo;
-#if defined(REAL_DMA_POLL)
-	int cnt, toPIO;
-	unsigned char saved_data = 0, overrun = 0, residue;
-#endif
+	int result = 0;
 
 	if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
 		*phase = tmp;
 		return -1;
 	}
-#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
+
+	hostdata->connected->SCp.phase = p;
+
 	if (p & SR_IO) {
-		if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS))
-			c -= 2;
+		if (hostdata->read_overruns)
+			c -= hostdata->read_overruns;
+		else if (hostdata->flags & FLAG_DMA_FIXUP)
+			--c;
 	}
-	hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c);
 
 	dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
-	         (p & SR_IO) ? "receive" : "send", c, *data);
+	         (p & SR_IO) ? "receive" : "send", c, d);
+
+#ifdef CONFIG_SUN3
+	/* send start chain */
+	sun3scsi_dma_start(c, *data);
 #endif
 
 	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-
-#ifdef REAL_DMA
 	NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
 	                        MR_ENABLE_EOP_INTR);
-#elif defined(REAL_DMA_POLL)
-	NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
-#else
-	/*
-	 * Note : on my sample board, watch-dog timeouts occurred when interrupts
-	 * were not disabled for the duration of a single DMA transfer, from
-	 * before the setting of DMA mode to after transfer of the last byte.
-	 */
-
-	if (hostdata->flags & FLAG_NO_DMA_FIXUP)
-		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
-		                        MR_ENABLE_EOP_INTR);
-	else
-		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
-#endif				/* def REAL_DMA */
 
-	dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
+	if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) {
+		/* On the Medusa, it is a must to initialize the DMA before
+		 * starting the NCR. This is also the cleaner way for the TT.
+		 */
+		if (p & SR_IO)
+			result = NCR5380_dma_recv_setup(instance, d, c);
+		else
+			result = NCR5380_dma_send_setup(instance, d, c);
+	}
 
 	/*
 	 * On the PAS16 at least I/O recovery delays are not needed here.
@@ -1574,24 +1593,49 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 	 */
 
 	if (p & SR_IO) {
-		io_recovery_delay(1);
+		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+		NCR5380_io_delay(1);
 		NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
 	} else {
-		io_recovery_delay(1);
+		NCR5380_io_delay(1);
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
-		io_recovery_delay(1);
+		NCR5380_io_delay(1);
 		NCR5380_write(START_DMA_SEND_REG, 0);
-		io_recovery_delay(1);
+		NCR5380_io_delay(1);
 	}
 
-#if defined(REAL_DMA_POLL)
-	do {
-		tmp = NCR5380_read(BUS_AND_STATUS_REG);
-	} while ((tmp & BASR_PHASE_MATCH) && !(tmp & (BASR_BUSY_ERROR | BASR_END_DMA_TRANSFER)));
+#ifdef CONFIG_SUN3
+#ifdef SUN3_SCSI_VME
+	dregs->csr |= CSR_DMA_ENABLE;
+#endif
+	sun3_dma_active = 1;
+#endif
+
+	if (hostdata->flags & FLAG_LATE_DMA_SETUP) {
+		/* On the Falcon, the DMA setup must be done after the last
+		 * NCR access, else the DMA setup gets trashed!
+		 */
+		if (p & SR_IO)
+			result = NCR5380_dma_recv_setup(instance, d, c);
+		else
+			result = NCR5380_dma_send_setup(instance, d, c);
+	}
+
+	/* On failure, NCR5380_dma_xxxx_setup() returns a negative int. */
+	if (result < 0)
+		return result;
+
+	/* For real DMA, result is the byte count. DMA interrupt is expected. */
+	if (result > 0) {
+		hostdata->dma_len = result;
+		return 0;
+	}
+
+	/* The result is zero iff pseudo DMA send/receive was completed. */
+	hostdata->dma_len = c;
 
 /*
- * At this point, either we've completed DMA, or we have a phase mismatch,
- * or we've unexpectedly lost BUSY (which is a real error).
+ * A note regarding the DMA errata workarounds for early NMOS silicon.
  *
  * For DMA sends, we want to wait until the last byte has been
  * transferred out over the bus before we turn off DMA mode.  Alas, there
@@ -1618,79 +1662,16 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
  * properly, or the target switches to MESSAGE IN phase to signal a
  * disconnection (either operation bringing the DMA to a clean halt).
  * However, in order to handle scatter-receive, we must work around the
- * problem.  The chosen fix is to DMA N-2 bytes, then check for the
+ * problem.  The chosen fix is to DMA fewer bytes, then check for the
  * condition before taking the NCR5380 out of DMA mode.  One or two extra
  * bytes are transferred via PIO as necessary to fill out the original
  * request.
  */
 
-	if (p & SR_IO) {
-		if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) {
-			udelay(10);
-			if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
-			    (BASR_PHASE_MATCH | BASR_ACK)) {
-				saved_data = NCR5380_read(INPUT_DATA_REGISTER);
-				overrun = 1;
-			}
-		}
-	} else {
-		int limit = 100;
-		while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) {
-			if (!(tmp & BASR_PHASE_MATCH))
-				break;
-			if (--limit < 0)
-				break;
-		}
-	}
-
-	dsprintk(NDEBUG_DMA, "polled DMA transfer complete, basr 0x%02x, sr 0x%02x\n",
-	         tmp, NCR5380_read(STATUS_REG));
-
-	NCR5380_write(MODE_REG, MR_BASE);
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-	residue = NCR5380_dma_residual(instance);
-	c -= residue;
-	*count -= c;
-	*data += c;
-	*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
-
-	if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS) &&
-	    *phase == p && (p & SR_IO) && residue == 0) {
-		if (overrun) {
-			dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
-			**data = saved_data;
-			*data += 1;
-			*count -= 1;
-			cnt = toPIO = 1;
-		} else {
-			printk("No overrun??\n");
-			cnt = toPIO = 2;
-		}
-		dprintk(NDEBUG_DMA, "Doing %d-byte PIO to 0x%X\n", cnt, *data);
-		NCR5380_transfer_pio(instance, phase, &cnt, data);
-		*count -= toPIO - cnt;
-	}
-
-	dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count));
-	return 0;
-
-#elif defined(REAL_DMA)
-	return 0;
-#else				/* defined(REAL_DMA_POLL) */
-	if (p & SR_IO) {
-		foo = NCR5380_pread(instance, d,
-			hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
-		if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
+	if (hostdata->flags & FLAG_DMA_FIXUP) {
+		if (p & SR_IO) {
 			/*
-			 * We can't disable DMA mode after successfully transferring
-			 * what we plan to be the last byte, since that would open up
-			 * a race condition where if the target asserted REQ before
-			 * we got the DMA mode reset, the NCR5380 would have latched
-			 * an additional byte into the INPUT DATA register and we'd
-			 * have dropped it.
-			 *
-			 * The workaround was to transfer one fewer bytes than we
+			 * The workaround was to transfer fewer bytes than we
 			 * intended to with the pseudo-DMA read function, wait for
 			 * the chip to latch the last byte, read it, and then disable
 			 * pseudo-DMA mode.
@@ -1706,19 +1687,16 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 
 			if (NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
 			                          BASR_DRQ, BASR_DRQ, HZ) < 0) {
-				foo = -1;
+				result = -1;
 				shost_printk(KERN_ERR, instance, "PDMA read: DRQ timeout\n");
 			}
 			if (NCR5380_poll_politely(instance, STATUS_REG,
 			                          SR_REQ, 0, HZ) < 0) {
-				foo = -1;
+				result = -1;
 				shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n");
 			}
-			d[c - 1] = NCR5380_read(INPUT_DATA_REG);
-		}
-	} else {
-		foo = NCR5380_pwrite(instance, d, c);
-		if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
+			d[*count - 1] = NCR5380_read(INPUT_DATA_REG);
+		} else {
 			/*
 			 * Wait for the last byte to be sent.  If REQ is being asserted for
 			 * the byte we're interested, we'll ACK it and it will go false.
@@ -1726,21 +1704,15 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 			if (NCR5380_poll_politely2(instance,
 			     BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ,
 			     BUS_AND_STATUS_REG, BASR_PHASE_MATCH, 0, HZ) < 0) {
-				foo = -1;
+				result = -1;
 				shost_printk(KERN_ERR, instance, "PDMA write: DRQ and phase timeout\n");
 			}
 		}
 	}
-	NCR5380_write(MODE_REG, MR_BASE);
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-	*data = d + c;
-	*count = 0;
-	*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
-	return foo;
-#endif				/* def REAL_DMA */
+
+	NCR5380_dma_complete(instance);
+	return result;
 }
-#endif				/* defined(REAL_DMA) | defined(PSEUDO_DMA) */
 
 /*
  * Function : NCR5380_information_transfer (struct Scsi_Host *instance)
@@ -1770,6 +1742,10 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 	unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
 	struct scsi_cmnd *cmd;
 
+#ifdef SUN3_SCSI_VME
+	dregs->csr |= CSR_INTR;
+#endif
+
 	while ((cmd = hostdata->connected)) {
 		struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
 
@@ -1781,6 +1757,31 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				old_phase = phase;
 				NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
 			}
+#ifdef CONFIG_SUN3
+			if (phase == PHASE_CMDOUT) {
+				void *d;
+				unsigned long count;
+
+				if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
+					count = cmd->SCp.buffer->length;
+					d = sg_virt(cmd->SCp.buffer);
+				} else {
+					count = cmd->SCp.this_residual;
+					d = cmd->SCp.ptr;
+				}
+
+				if (sun3_dma_setup_done != cmd &&
+				    sun3scsi_dma_xfer_len(count, cmd) > 0) {
+					sun3scsi_dma_setup(instance, d, count,
+					                   rq_data_dir(cmd->request));
+					sun3_dma_setup_done = cmd;
+				}
+#ifdef SUN3_SCSI_VME
+				dregs->csr |= CSR_INTR;
+#endif
+			}
+#endif /* CONFIG_SUN3 */
+
 			if (sink && (phase != PHASE_MSGOUT)) {
 				NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
 
@@ -1831,13 +1832,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				 * in an unconditional loop.
 				 */
 
-#if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL)
 				transfersize = 0;
-				if (!cmd->device->borken &&
-				    !(hostdata->flags & FLAG_NO_PSEUDO_DMA))
+				if (!cmd->device->borken)
 					transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
 
-				if (transfersize) {
+				if (transfersize > 0) {
 					len = transfersize;
 					if (NCR5380_transfer_dma(instance, &phase,
 					    &len, (unsigned char **)&cmd->SCp.ptr)) {
@@ -1853,11 +1852,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 						do_abort(instance);
 						cmd->result = DID_ERROR << 16;
 						/* XXX - need to source or sink data here, as appropriate */
-					} else
-						cmd->SCp.this_residual -= transfersize - len;
-				} else
-#endif				/* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */
-				{
+					}
+				} else {
 					/* Break up transfer into 3 ms chunks,
 					 * presuming 6 accesses per handshake.
 					 */
@@ -1868,6 +1864,10 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					                     (unsigned char **)&cmd->SCp.ptr);
 					cmd->SCp.this_residual -= transfersize - len;
 				}
+#ifdef CONFIG_SUN3
+				if (sun3_dma_setup_done == cmd)
+					sun3_dma_setup_done = NULL;
+#endif
 				return;
 			case PHASE_MSGIN:
 				len = 1;
@@ -1912,6 +1912,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 
 					/* Enable reselect interrupts */
 					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+
+					maybe_release_dma_irq(instance);
 					return;
 				case MESSAGE_REJECT:
 					/* Accept message by clearing ACK */
@@ -1944,6 +1946,9 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 
 					/* Enable reselect interrupts */
 					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+#ifdef SUN3_SCSI_VME
+					dregs->csr |= CSR_DMA_ENABLE;
+#endif
 					return;
 					/*
 					 * The SCSI data pointer is *IMPLICITLY* saved on a disconnect
@@ -2047,6 +2052,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					hostdata->connected = NULL;
 					cmd->result = DID_ERROR << 16;
 					complete_cmd(instance, cmd);
+					maybe_release_dma_irq(instance);
 					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
 					return;
 				}
@@ -2094,10 +2100,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	unsigned char target_mask;
-	unsigned char lun, phase;
-	int len;
+	unsigned char lun;
 	unsigned char msg[3];
-	unsigned char *data;
 	struct NCR5380_cmd *ncmd;
 	struct scsi_cmnd *tmp;
 
@@ -2139,15 +2143,26 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		return;
 	}
 
-	len = 1;
-	data = msg;
-	phase = PHASE_MSGIN;
-	NCR5380_transfer_pio(instance, &phase, &len, &data);
+#ifdef CONFIG_SUN3
+	/* acknowledge toggle to MSGIN */
+	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(PHASE_MSGIN));
 
-	if (len) {
-		do_abort(instance);
-		return;
+	/* peek at the byte without really hitting the bus */
+	msg[0] = NCR5380_read(CURRENT_SCSI_DATA_REG);
+#else
+	{
+		int len = 1;
+		unsigned char *data = msg;
+		unsigned char phase = PHASE_MSGIN;
+
+		NCR5380_transfer_pio(instance, &phase, &len, &data);
+
+		if (len) {
+			do_abort(instance);
+			return;
+		}
 	}
+#endif /* CONFIG_SUN3 */
 
 	if (!(msg[0] & 0x80)) {
 		shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
@@ -2195,59 +2210,37 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		return;
 	}
 
-	/* Accept message by clearing ACK */
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-	hostdata->connected = tmp;
-	dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
-	         scmd_id(tmp), tmp->device->lun, tmp->tag);
-}
+#ifdef CONFIG_SUN3
+	{
+		void *d;
+		unsigned long count;
 
-/*
- * Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
- *
- * Purpose : called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
- *
- * Inputs : instance - this instance of the NCR5380.
- *
- * Returns : pointer to the scsi_cmnd structure for which the I_T_L
- * nexus has been reestablished, on failure NULL is returned.
- */
-
-#ifdef REAL_DMA
-static void NCR5380_dma_complete(NCR5380_instance * instance) {
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	int transferred;
+		if (!tmp->SCp.this_residual && tmp->SCp.buffers_residual) {
+			count = tmp->SCp.buffer->length;
+			d = sg_virt(tmp->SCp.buffer);
+		} else {
+			count = tmp->SCp.this_residual;
+			d = tmp->SCp.ptr;
+		}
 
-	/*
-	 * XXX this might not be right.
-	 *
-	 * Wait for final byte to transfer, ie wait for ACK to go false.
-	 *
-	 * We should use the Last Byte Sent bit, unfortunately this is
-	 * not available on the 5380/5381 (only the various CMOS chips)
-	 *
-	 * FIXME: timeout, and need to handle long timeout/irq case
-	 */
+		if (sun3_dma_setup_done != tmp &&
+		    sun3scsi_dma_xfer_len(count, tmp) > 0) {
+			sun3scsi_dma_setup(instance, d, count,
+			                   rq_data_dir(tmp->request));
+			sun3_dma_setup_done = tmp;
+		}
+	}
 
-	NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ);
+	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
+#endif /* CONFIG_SUN3 */
 
+	/* Accept message by clearing ACK */
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 
-	/*
-	 * The only places we should see a phase mismatch and have to send
-	 * data from the same set of pointers will be the data transfer
-	 * phases.  So, residual, requested length are only important here.
-	 */
-
-	if (!(hostdata->connected->SCp.phase & SR_CD)) {
-		transferred = instance->dmalen - NCR5380_dma_residual();
-		hostdata->connected->SCp.this_residual -= transferred;
-		hostdata->connected->SCp.ptr += transferred;
-	}
+	hostdata->connected = tmp;
+	dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu\n",
+	         scmd_id(tmp), tmp->device->lun);
 }
-#endif				/* def REAL_DMA */
 
 /**
  * list_find_cmd - test for presence of a command in a linked list
@@ -2360,9 +2353,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 	if (hostdata->connected == cmd) {
 		dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
 		hostdata->connected = NULL;
-#ifdef REAL_DMA
 		hostdata->dma_len = 0;
-#endif
 		if (do_abort(instance)) {
 			set_host_byte(cmd, DID_ERROR);
 			complete_cmd(instance, cmd);
@@ -2388,6 +2379,7 @@ out:
 		dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
 
 	queue_work(hostdata->work_q, &hostdata->main_task);
+	maybe_release_dma_irq(instance);
 	spin_unlock_irqrestore(&hostdata->lock, flags);
 
 	return result;
@@ -2445,7 +2437,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
 		struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
 
 		set_host_byte(cmd, DID_RESET);
-		cmd->scsi_done(cmd);
+		complete_cmd(instance, cmd);
 	}
 	INIT_LIST_HEAD(&hostdata->disconnected);
 
@@ -2465,11 +2457,10 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
 
 	for (i = 0; i < 8; ++i)
 		hostdata->busy[i] = 0;
-#ifdef REAL_DMA
 	hostdata->dma_len = 0;
-#endif
 
 	queue_work(hostdata->work_q, &hostdata->main_task);
+	maybe_release_dma_irq(instance);
 	spin_unlock_irqrestore(&hostdata->lock, flags);
 
 	return SUCCESS;
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index a79288682a74..c60728785d89 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -199,13 +199,6 @@
 
 #define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
 
-/* 
- * "Special" value for the (unsigned char) command tag, to indicate
- * I_T_L nexus instead of I_T_L_Q.
- */
-
-#define TAG_NONE	0xff
-
 /*
  * These are "special" values for the irq and dma_channel fields of the 
  * Scsi_Host structure
@@ -220,28 +213,17 @@
 #define NO_IRQ		0
 #endif
 
-#define FLAG_NO_DMA_FIXUP		1	/* No DMA errata workarounds */
+#define FLAG_DMA_FIXUP			1	/* Use DMA errata workarounds */
 #define FLAG_NO_PSEUDO_DMA		8	/* Inhibit DMA */
 #define FLAG_LATE_DMA_SETUP		32	/* Setup NCR before DMA H/W */
-#define FLAG_TAGGED_QUEUING		64	/* as X3T9.2 spelled it */
 #define FLAG_TOSHIBA_DELAY		128	/* Allow for borken CD-ROMs */
 
-#ifdef SUPPORT_TAGS
-struct tag_alloc {
-	DECLARE_BITMAP(allocated, MAX_TAGS);
-	int nr_allocated;
-	int queue_size;
-};
-#endif
-
 struct NCR5380_hostdata {
 	NCR5380_implementation_fields;		/* implementation specific */
 	struct Scsi_Host *host;			/* Host backpointer */
 	unsigned char id_mask, id_higher_mask;	/* 1 << id, all bits greater */
 	unsigned char busy[8];			/* index = target, bit = lun */
-#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
 	int dma_len;				/* requested length of DMA */
-#endif
 	unsigned char last_message;		/* last message OUT */
 	struct scsi_cmnd *connected;		/* currently connected cmnd */
 	struct scsi_cmnd *selecting;		/* cmnd to be connected */
@@ -256,13 +238,6 @@ struct NCR5380_hostdata {
 	int read_overruns;                /* number of bytes to cut from a
 	                                   * transfer to handle chip overruns */
 	struct work_struct main_task;
-#ifdef SUPPORT_TAGS
-	struct tag_alloc TagAlloc[8][8];	/* 8 targets and 8 LUNs */
-#endif
-#ifdef PSEUDO_DMA
-	unsigned spin_max_r;
-	unsigned spin_max_w;
-#endif
 	struct workqueue_struct *work_q;
 	unsigned long accesses_per_ms;	/* chip register accesses per ms */
 };
@@ -305,132 +280,20 @@ static void NCR5380_print(struct Scsi_Host *instance);
 #define NCR5380_dprint_phase(flg, arg) do {} while (0)
 #endif
 
-#if defined(AUTOPROBE_IRQ)
 static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
-#endif
 static int NCR5380_init(struct Scsi_Host *instance, int flags);
 static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
 static void NCR5380_exit(struct Scsi_Host *instance);
 static void NCR5380_information_transfer(struct Scsi_Host *instance);
-#ifndef DONT_USE_INTR
 static irqreturn_t NCR5380_intr(int irq, void *dev_id);
-#endif
 static void NCR5380_main(struct work_struct *work);
 static const char *NCR5380_info(struct Scsi_Host *instance);
 static void NCR5380_reselect(struct Scsi_Host *instance);
 static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
-#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
 static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
-#endif
 static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
+static int NCR5380_poll_politely(struct Scsi_Host *, int, int, int, int);
+static int NCR5380_poll_politely2(struct Scsi_Host *, int, int, int, int, int, int, int);
 
-#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))
-
-#if defined(i386) || defined(__alpha__)
-
-/**
- *	NCR5380_pc_dma_setup		-	setup ISA DMA
- *	@instance: adapter to set up
- *	@ptr: block to transfer (virtual address)
- *	@count: number of bytes to transfer
- *	@mode: DMA controller mode to use
- *
- *	Program the DMA controller ready to perform an ISA DMA transfer
- *	on this chip.
- *
- *	Locks: takes and releases the ISA DMA lock.
- */
- 
-static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
-{
-	unsigned limit;
-	unsigned long bus_addr = virt_to_bus(ptr);
-	unsigned long flags;
-
-	if (instance->dma_channel <= 3) {
-		if (count > 65536)
-			count = 65536;
-		limit = 65536 - (bus_addr & 0xFFFF);
-	} else {
-		if (count > 65536 * 2)
-			count = 65536 * 2;
-		limit = 65536 * 2 - (bus_addr & 0x1FFFF);
-	}
-
-	if (count > limit)
-		count = limit;
-
-	if ((count & 1) || (bus_addr & 1))
-		panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
-	
-	flags=claim_dma_lock();
-	disable_dma(instance->dma_channel);
-	clear_dma_ff(instance->dma_channel);
-	set_dma_addr(instance->dma_channel, bus_addr);
-	set_dma_count(instance->dma_channel, count);
-	set_dma_mode(instance->dma_channel, mode);
-	enable_dma(instance->dma_channel);
-	release_dma_lock(flags);
-	
-	return count;
-}
-
-/**
- *	NCR5380_pc_dma_write_setup		-	setup ISA DMA write
- *	@instance: adapter to set up
- *	@ptr: block to transfer (virtual address)
- *	@count: number of bytes to transfer
- *
- *	Program the DMA controller ready to perform an ISA DMA write to the
- *	SCSI controller.
- *
- *	Locks: called routines take and release the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
-{
-	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
-}
-
-/**
- *	NCR5380_pc_dma_read_setup		-	setup ISA DMA read
- *	@instance: adapter to set up
- *	@ptr: block to transfer (virtual address)
- *	@count: number of bytes to transfer
- *
- *	Program the DMA controller ready to perform an ISA DMA read from the
- *	SCSI controller.
- *
- *	Locks: called routines take and release the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
-{
-	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
-}
-
-/**
- *	NCR5380_pc_dma_residual		-	return bytes left 
- *	@instance: adapter
- *
- *	Reports the number of bytes left over after the DMA was terminated.
- *
- *	Locks: takes and releases the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
-{
-	unsigned long flags;
-	int tmp;
-
-	flags = claim_dma_lock();
-	clear_dma_ff(instance->dma_channel);
-	tmp = get_dma_residue(instance->dma_channel);
-	release_dma_lock(flags);
-	
-	return tmp;
-}
-#endif				/* defined(i386) || defined(__alpha__) */
-#endif				/* defined(REAL_DMA)  */
 #endif				/* __KERNEL__ */
 #endif				/* NCR5380_H */
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 7dfd0fa27255..6678d1fd897b 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -555,8 +555,6 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext)
-		return -ENOMEM;
 
 	aac_fib_init(cmd_fibcontext);
 	dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
@@ -1037,8 +1035,6 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext)
-		return -ENOMEM;
 
 	aac_fib_init(cmd_fibcontext);
 	dinfo = (struct aac_get_serial *) fib_data(cmd_fibcontext);
@@ -1950,10 +1946,6 @@ static int aac_read(struct scsi_cmnd * scsicmd)
 	 *	Alocate and initialize a Fib
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext) {
-		printk(KERN_WARNING "aac_read: fib allocation failed\n");
-		return -1;
-	}
 
 	status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
 
@@ -2048,16 +2040,6 @@ static int aac_write(struct scsi_cmnd * scsicmd)
 	 *	Allocate and initialize a Fib then setup a BlockWrite command
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext) {
-		/* FIB temporarily unavailable,not catastrophic failure */
-
-		/* scsicmd->result = DID_ERROR << 16;
-		 * scsicmd->scsi_done(scsicmd);
-		 * return 0;
-		 */
-		printk(KERN_WARNING "aac_write: fib allocation failed\n");
-		return -1;
-	}
 
 	status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
 
@@ -2283,8 +2265,6 @@ static int aac_start_stop(struct scsi_cmnd *scsicmd)
 	 *	Allocate and initialize a Fib
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
-	if (!cmd_fibcontext)
-		return SCSI_MLQUEUE_HOST_BUSY;
 
 	aac_fib_init(cmd_fibcontext);
 
@@ -3184,8 +3164,6 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
 	 *	Allocate and initialize a Fib then setup a BlockWrite command
 	 */
 	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
-	if (!cmd_fibcontext)
-		return -1;
 
 	status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
 
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index efa493cf1bc6..8f90d9e77104 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -29,6 +29,7 @@ enum {
 #define AAC_INT_MODE_MSI		(1<<1)
 #define AAC_INT_MODE_AIF		(1<<2)
 #define AAC_INT_MODE_SYNC		(1<<3)
+#define AAC_INT_MODE_MSIX		(1<<16)
 
 #define AAC_INT_ENABLE_TYPE1_INTX	0xfffffffb
 #define AAC_INT_ENABLE_TYPE1_MSIX	0xfffffffa
@@ -62,7 +63,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 41052
+# define AAC_DRIVER_BUILD 41066
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
@@ -720,7 +721,7 @@ struct sa_registers {
 };
 
 
-#define Sa_MINIPORT_REVISION			1
+#define SA_INIT_NUM_MSIXVECTORS		1
 
 #define sa_readw(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
 #define sa_readl(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
@@ -2065,6 +2066,10 @@ extern struct aac_common aac_config;
 #define			AifEnAddJBOD		30	/* JBOD created */
 #define			AifEnDeleteJBOD		31	/* JBOD deleted */
 
+#define			AifBuManagerEvent		42 /* Bu management*/
+#define			AifBuCacheDataLoss		10
+#define			AifBuCacheDataRecover	11
+
 #define		AifCmdJobProgress	2	/* Progress report */
 #define			AifJobCtrZero	101	/* Array Zero progress */
 #define			AifJobStsSuccess 1	/* Job completes */
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 2b4e75380ae6..341ea327ae79 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -37,6 +37,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
+#include <linux/delay.h>
 #include <linux/completion.h>
 #include <linux/mm.h>
 #include <scsi/scsi_host.h>
@@ -47,6 +48,20 @@ struct aac_common aac_config = {
 	.irq_mod = 1
 };
 
+static inline int aac_is_msix_mode(struct aac_dev *dev)
+{
+	u32 status;
+
+	status = src_readl(dev, MUnit.OMR);
+	return (status & AAC_INT_MODE_MSIX);
+}
+
+static inline void aac_change_to_intx(struct aac_dev *dev)
+{
+	aac_src_access_devreg(dev, AAC_DISABLE_MSIX);
+	aac_src_access_devreg(dev, AAC_ENABLE_INTX);
+}
+
 static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign)
 {
 	unsigned char *base;
@@ -91,7 +106,7 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
 	init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
 	if (dev->max_fib_size != sizeof(struct hw_fib))
 		init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
-	init->Sa_MSIXVectors = cpu_to_le32(Sa_MINIPORT_REVISION);
+	init->Sa_MSIXVectors = cpu_to_le32(SA_INIT_NUM_MSIXVECTORS);
 	init->fsrev = cpu_to_le32(dev->fsrev);
 
 	/*
@@ -378,21 +393,8 @@ void aac_define_int_mode(struct aac_dev *dev)
 			msi_count = i;
 		} else {
 			dev->msi_enabled = 0;
-			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled) {
-		msi_count = 1;
-		i = pci_enable_msi(dev->pdev);
-
-		if (!i) {
-			dev->msi_enabled = 1;
-			dev->msi = 1;
-		} else {
-			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
-					dev->name, dev->id, i);
+			dev_err(&dev->pdev->dev,
+			"MSIX not supported!! Will try INTX 0x%x.\n", i);
 		}
 	}
 
@@ -427,6 +429,15 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	dev->comm_interface = AAC_COMM_PRODUCER;
 	dev->raw_io_interface = dev->raw_io_64 = 0;
 
+
+	/*
+	 * Enable INTX mode, if not done already Enabled
+	 */
+	if (aac_is_msix_mode(dev)) {
+		aac_change_to_intx(dev);
+		dev_info(&dev->pdev->dev, "Changed firmware to INTX mode");
+	}
+
 	if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
 		0, 0, 0, 0, 0, 0,
 		status+0, status+1, status+2, status+3, NULL)) &&
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 511bbc575062..0aeecec1f5ea 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -637,10 +637,10 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 					}
 					return -EFAULT;
 				}
-				/* We used to udelay() here but that absorbed
-				 * a CPU when a timeout occured. Not very
-				 * useful. */
-				cpu_relax();
+				/*
+				 * Allow other processes / CPUS to use core
+				 */
+				schedule();
 			}
 		} else if (down_interruptible(&fibptr->event_wait)) {
 			/* Do nothing ... satisfy
@@ -901,6 +901,31 @@ void aac_printf(struct aac_dev *dev, u32 val)
 	memset(cp, 0, 256);
 }
 
+static inline int aac_aif_data(struct aac_aifcmd *aifcmd, uint32_t index)
+{
+	return le32_to_cpu(((__le32 *)aifcmd->data)[index]);
+}
+
+
+static void aac_handle_aif_bu(struct aac_dev *dev, struct aac_aifcmd *aifcmd)
+{
+	switch (aac_aif_data(aifcmd, 1)) {
+	case AifBuCacheDataLoss:
+		if (aac_aif_data(aifcmd, 2))
+			dev_info(&dev->pdev->dev, "Backup unit had cache data loss - [%d]\n",
+			aac_aif_data(aifcmd, 2));
+		else
+			dev_info(&dev->pdev->dev, "Backup Unit had cache data loss\n");
+		break;
+	case AifBuCacheDataRecover:
+		if (aac_aif_data(aifcmd, 2))
+			dev_info(&dev->pdev->dev, "DDR cache data recovered successfully - [%d]\n",
+			aac_aif_data(aifcmd, 2));
+		else
+			dev_info(&dev->pdev->dev, "DDR cache data recovered successfully\n");
+		break;
+	}
+}
 
 /**
  *	aac_handle_aif		-	Handle a message from the firmware
@@ -1154,6 +1179,8 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 				  ADD : DELETE;
 				break;
 			}
+			case AifBuManagerEvent:
+				aac_handle_aif_bu(dev, aifcmd);
 			break;
 		}
 
@@ -1996,6 +2023,10 @@ int aac_command_thread(void *data)
 		if (difference <= 0)
 			difference = 1;
 		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (kthread_should_stop())
+			break;
+
 		schedule_timeout(difference);
 
 		if (kthread_should_stop())
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index d677b52860ae..7e836205aef1 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -392,9 +392,10 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
 			if (likely(fib->callback && fib->callback_data)) {
 				fib->flags &= FIB_CONTEXT_FLAG_FASTRESP;
 				fib->callback(fib->callback_data, fib);
-			} else {
-				aac_fib_complete(fib);
-			}
+			} else
+				dev_info(&dev->pdev->dev,
+				"Invalid callback_fib[%d] (*%p)(%p)\n",
+				index, fib->callback, fib->callback_data);
 		} else {
 			unsigned long flagv;
 	  		dprintk((KERN_INFO "event_wait up\n"));
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 21a67ed047e8..a943bd230bc2 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -452,10 +452,11 @@ static int aac_slave_configure(struct scsi_device *sdev)
 		else if (depth < 2)
 			depth = 2;
 		scsi_change_queue_depth(sdev, depth);
-	} else
+	} else {
 		scsi_change_queue_depth(sdev, 1);
 
 		sdev->tagged_supported = 1;
+	}
 
 	return 0;
 }
@@ -1298,6 +1299,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		shost->this_id = shost->max_id;
 
+	aac_intr_normal(aac, 0, 2, 0, NULL);
+
 	/*
 	 * dmb - we may need to move the setting of these parms somewhere else once
 	 * we get a fib that can report the actual numbers
@@ -1430,8 +1433,8 @@ static int aac_acquire_resources(struct aac_dev *dev)
 		/* After EEH recovery or suspend resume, max_msix count
 		 * may change, therfore updating in init as well.
 		 */
-		aac_adapter_start(dev);
 		dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
+		aac_adapter_start(dev);
 	}
 	return 0;
 
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index bc0203f3d243..28f8b8a1b8a4 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -135,7 +135,8 @@ static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
 
 	if (mode & AAC_INT_MODE_AIF) {
 		/* handle AIF */
-		aac_intr_normal(dev, 0, 2, 0, NULL);
+		if (dev->aif_thread && dev->fsa_dev)
+			aac_intr_normal(dev, 0, 2, 0, NULL);
 		if (dev->msi_enabled)
 			aac_src_access_devreg(dev, AAC_CLEAR_AIF_BIT);
 		mode = 0;
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index 221f18c5df93..8e9cfe8f22f5 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -13,13 +13,14 @@
 
 #include <scsi/scsi_host.h>
 
-#define PSEUDO_DMA
-
 #define priv(host)			((struct NCR5380_hostdata *)(host)->hostdata)
 #define NCR5380_read(reg)		cumanascsi_read(instance, reg)
 #define NCR5380_write(reg, value)	cumanascsi_write(instance, reg, value)
 
 #define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+#define NCR5380_dma_recv_setup		cumanascsi_pread
+#define NCR5380_dma_send_setup		cumanascsi_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_intr			cumanascsi_intr
 #define NCR5380_queue_command		cumanascsi_queue_command
@@ -41,8 +42,8 @@ void cumanascsi_setup(char *str, int *ints)
 #define L(v)	(((v)<<16)|((v) & 0x0000ffff))
 #define H(v)	(((v)>>16)|((v) & 0xffff0000))
 
-static inline int
-NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr, int len)
+static inline int cumanascsi_pwrite(struct Scsi_Host *host,
+                                    unsigned char *addr, int len)
 {
   unsigned long *laddr;
   void __iomem *dma = priv(host)->dma + 0x2000;
@@ -101,11 +102,14 @@ NCR5380_pwrite(struct Scsi_Host *host, unsigned char *addr, int len)
   }
 end:
   writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL);
-  return len;
+
+	if (len)
+		return -1;
+	return 0;
 }
 
-static inline int
-NCR5380_pread(struct Scsi_Host *host, unsigned char *addr, int len)
+static inline int cumanascsi_pread(struct Scsi_Host *host,
+                                   unsigned char *addr, int len)
 {
   unsigned long *laddr;
   void __iomem *dma = priv(host)->dma + 0x2000;
@@ -163,7 +167,10 @@ NCR5380_pread(struct Scsi_Host *host, unsigned char *addr, int len)
   }
 end:
   writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL);
-  return len;
+
+	if (len)
+		return -1;
+	return 0;
 }
 
 static unsigned char cumanascsi_read(struct Scsi_Host *host, unsigned int reg)
@@ -239,7 +246,7 @@ static int cumanascsi1_probe(struct expansion_card *ec,
 
 	host->irq = ec->irq;
 
-	ret = NCR5380_init(host, 0);
+	ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP);
 	if (ret)
 		goto out_unmap;
 
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index faa1bee07c8a..edce5f3cfdba 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -365,7 +365,7 @@ static struct scsi_host_template cumanascsi2_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize			= SG_MAX_SEGMENTS,
 	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "cumanascsi2",
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index a8ad6880dd91..e93e047f4316 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -484,7 +484,7 @@ static struct scsi_host_template eesox_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize			= SG_MAX_SEGMENTS,
 	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "eesox",
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 1fab1d1896b1..a396024a3cae 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -14,9 +14,6 @@
 
 #include <scsi/scsi_host.h>
 
-/*#define PSEUDO_DMA*/
-#define DONT_USE_INTR
-
 #define priv(host)			((struct NCR5380_hostdata *)(host)->hostdata)
 
 #define NCR5380_read(reg) \
@@ -24,7 +21,10 @@
 #define NCR5380_write(reg, value) \
 	writeb(value, priv(instance)->base + ((reg) << 2))
 
-#define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+#define NCR5380_dma_xfer_len(instance, cmd, phase)	(0)
+#define NCR5380_dma_recv_setup		oakscsi_pread
+#define NCR5380_dma_send_setup		oakscsi_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_queue_command		oakscsi_queue_command
 #define NCR5380_info			oakscsi_info
@@ -40,23 +40,23 @@
 #define STAT	((128 + 16) << 2)
 #define DATA	((128 + 8) << 2)
 
-static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
-              int len)
+static inline int oakscsi_pwrite(struct Scsi_Host *instance,
+                                 unsigned char *addr, int len)
 {
   void __iomem *base = priv(instance)->base;
 
 printk("writing %p len %d\n",addr, len);
-  if(!len) return -1;
 
   while(1)
   {
     int status;
     while (((status = readw(base + STAT)) & 0x100)==0);
   }
+  return 0;
 }
 
-static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
-              int len)
+static inline int oakscsi_pread(struct Scsi_Host *instance,
+                                unsigned char *addr, int len)
 {
   void __iomem *base = priv(instance)->base;
 printk("reading %p len %d\n", addr, len);
@@ -73,7 +73,7 @@ printk("reading %p len %d\n", addr, len);
       if(status & 0x200 || !timeout)
       {
         printk("status = %08X\n", status);
-        return 1;
+        return -1;
       }
     }
 
@@ -143,7 +143,7 @@ static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	host->irq = NO_IRQ;
 	host->n_io_port = 255;
 
-	ret = NCR5380_init(host, 0);
+	ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP);
 	if (ret)
 		goto out_unmap;
 
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index 5e1b73e1b743..79aa88911b7f 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -291,7 +291,7 @@ static struct scsi_host_template powertecscsi_template = {
 
 	.can_queue			= 8,
 	.this_id			= 7,
-	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize			= SG_MAX_SEGMENTS,
 	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 2,
 	.use_clustering			= ENABLE_CLUSTERING,
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
deleted file mode 100644
index 389825ba5d96..000000000000
--- a/drivers/scsi/atari_NCR5380.c
+++ /dev/null
@@ -1,2676 +0,0 @@
-/*
- * NCR 5380 generic driver routines.  These should make it *trivial*
- * to implement 5380 SCSI drivers under Linux with a non-trantor
- * architecture.
- *
- * Note that these routines also work with NR53c400 family chips.
- *
- * Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 666-5836
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
- */
-
-/* Ported to Atari by Roman Hodek and others. */
-
-/* Adapted for the sun3 by Sam Creasey. */
-
-/*
- * Design
- *
- * This is a generic 5380 driver.  To use it on a different platform,
- * one simply writes appropriate system specific macros (ie, data
- * transfer - some PC's will use the I/O bus, 68K's must use
- * memory mapped) and drops this file in their 'C' wrapper.
- *
- * As far as command queueing, two queues are maintained for
- * each 5380 in the system - commands that haven't been issued yet,
- * and commands that are currently executing.  This means that an
- * unlimited number of commands may be queued, letting
- * more commands propagate from the higher driver levels giving higher
- * throughput.  Note that both I_T_L and I_T_L_Q nexuses are supported,
- * allowing multiple commands to propagate all the way to a SCSI-II device
- * while a command is already executing.
- *
- *
- * Issues specific to the NCR5380 :
- *
- * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
- * piece of hardware that requires you to sit in a loop polling for
- * the REQ signal as long as you are connected.  Some devices are
- * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
- * while doing long seek operations. [...] These
- * broken devices are the exception rather than the rule and I'd rather
- * spend my time optimizing for the normal case.
- *
- * Architecture :
- *
- * At the heart of the design is a coroutine, NCR5380_main,
- * which is started from a workqueue for each NCR5380 host in the
- * system.  It attempts to establish I_T_L or I_T_L_Q nexuses by
- * removing the commands from the issue queue and calling
- * NCR5380_select() if a nexus is not established.
- *
- * Once a nexus is established, the NCR5380_information_transfer()
- * phase goes through the various phases as instructed by the target.
- * if the target goes into MSG IN and sends a DISCONNECT message,
- * the command structure is placed into the per instance disconnected
- * queue, and NCR5380_main tries to find more work.  If the target is
- * idle for too long, the system will try to sleep.
- *
- * If a command has disconnected, eventually an interrupt will trigger,
- * calling NCR5380_intr()  which will in turn call NCR5380_reselect
- * to reestablish a nexus.  This will run main if necessary.
- *
- * On command termination, the done function will be called as
- * appropriate.
- *
- * SCSI pointers are maintained in the SCp field of SCSI command
- * structures, being initialized after the command is connected
- * in NCR5380_select, and set as appropriate in NCR5380_information_transfer.
- * Note that in violation of the standard, an implicit SAVE POINTERS operation
- * is done, since some BROKEN disks fail to issue an explicit SAVE POINTERS.
- */
-
-/*
- * Using this file :
- * This file a skeleton Linux SCSI driver for the NCR 5380 series
- * of chips.  To use it, you write an architecture specific functions
- * and macros and include this file in your driver.
- *
- * These macros control options :
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- * transceivers.
- *
- * REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
- *
- * SUPPORT_TAGS - if defined, SCSI-2 tagged queuing is used where possible
- *
- * These macros MUST be defined :
- *
- * NCR5380_read(register)  - read from the specified register
- *
- * NCR5380_write(register, value) - write to the specific register
- *
- * NCR5380_implementation_fields  - additional fields needed for this
- * specific implementation of the NCR5380
- *
- * Either real DMA *or* pseudo DMA may be implemented
- * REAL functions :
- * NCR5380_REAL_DMA should be defined if real DMA is to be used.
- * Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
- *
- * Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
- *
- * NCR5380_dma_write_setup(instance, src, count) - initialize
- * NCR5380_dma_read_setup(instance, dst, count) - initialize
- * NCR5380_dma_residual(instance); - residual count
- *
- * PSEUDO functions :
- * NCR5380_pwrite(instance, src, count)
- * NCR5380_pread(instance, dst, count);
- *
- * The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID.  If the
- * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used.
- */
-
-static int do_abort(struct Scsi_Host *);
-static void do_reset(struct Scsi_Host *);
-
-#ifdef SUPPORT_TAGS
-
-/*
- * Functions for handling tagged queuing
- * =====================================
- *
- * ++roman (01/96): Now I've implemented SCSI-2 tagged queuing. Some notes:
- *
- * Using consecutive numbers for the tags is no good idea in my eyes. There
- * could be wrong re-usings if the counter (8 bit!) wraps and some early
- * command has been preempted for a long time. My solution: a bitfield for
- * remembering used tags.
- *
- * There's also the problem that each target has a certain queue size, but we
- * cannot know it in advance :-( We just see a QUEUE_FULL status being
- * returned. So, in this case, the driver internal queue size assumption is
- * reduced to the number of active tags if QUEUE_FULL is returned by the
- * target.
- *
- * We're also not allowed running tagged commands as long as an untagged
- * command is active. And REQUEST SENSE commands after a contingent allegiance
- * condition _must_ be untagged. To keep track whether an untagged command has
- * been issued, the host->busy array is still employed, as it is without
- * support for tagged queuing.
- *
- * One could suspect that there are possible race conditions between
- * is_lun_busy(), cmd_get_tag() and cmd_free_tag(). But I think this isn't the
- * case: is_lun_busy() and cmd_get_tag() are both called from NCR5380_main(),
- * which already guaranteed to be running at most once. It is also the only
- * place where tags/LUNs are allocated. So no other allocation can slip
- * between that pair, there could only happen a reselection, which can free a
- * tag, but that doesn't hurt. Only the sequence in cmd_free_tag() becomes
- * important: the tag bit must be cleared before 'nr_allocated' is decreased.
- */
-
-static void __init init_tags(struct NCR5380_hostdata *hostdata)
-{
-	int target, lun;
-	struct tag_alloc *ta;
-
-	if (!(hostdata->flags & FLAG_TAGGED_QUEUING))
-		return;
-
-	for (target = 0; target < 8; ++target) {
-		for (lun = 0; lun < 8; ++lun) {
-			ta = &hostdata->TagAlloc[target][lun];
-			bitmap_zero(ta->allocated, MAX_TAGS);
-			ta->nr_allocated = 0;
-			/* At the beginning, assume the maximum queue size we could
-			 * support (MAX_TAGS). This value will be decreased if the target
-			 * returns QUEUE_FULL status.
-			 */
-			ta->queue_size = MAX_TAGS;
-		}
-	}
-}
-
-
-/* Check if we can issue a command to this LUN: First see if the LUN is marked
- * busy by an untagged command. If the command should use tagged queuing, also
- * check that there is a free tag and the target's queue won't overflow. This
- * function should be called with interrupts disabled to avoid race
- * conditions.
- */
-
-static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
-{
-	u8 lun = cmd->device->lun;
-	struct Scsi_Host *instance = cmd->device->host;
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	if (hostdata->busy[cmd->device->id] & (1 << lun))
-		return 1;
-	if (!should_be_tagged ||
-	    !(hostdata->flags & FLAG_TAGGED_QUEUING) ||
-	    !cmd->device->tagged_supported)
-		return 0;
-	if (hostdata->TagAlloc[scmd_id(cmd)][lun].nr_allocated >=
-	    hostdata->TagAlloc[scmd_id(cmd)][lun].queue_size) {
-		dsprintk(NDEBUG_TAGS, instance, "target %d lun %d: no free tags\n",
-		         scmd_id(cmd), lun);
-		return 1;
-	}
-	return 0;
-}
-
-
-/* Allocate a tag for a command (there are no checks anymore, check_lun_busy()
- * must be called before!), or reserve the LUN in 'busy' if the command is
- * untagged.
- */
-
-static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
-{
-	u8 lun = cmd->device->lun;
-	struct Scsi_Host *instance = cmd->device->host;
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	/* If we or the target don't support tagged queuing, allocate the LUN for
-	 * an untagged command.
-	 */
-	if (!should_be_tagged ||
-	    !(hostdata->flags & FLAG_TAGGED_QUEUING) ||
-	    !cmd->device->tagged_supported) {
-		cmd->tag = TAG_NONE;
-		hostdata->busy[cmd->device->id] |= (1 << lun);
-		dsprintk(NDEBUG_TAGS, instance, "target %d lun %d now allocated by untagged command\n",
-		         scmd_id(cmd), lun);
-	} else {
-		struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
-
-		cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS);
-		set_bit(cmd->tag, ta->allocated);
-		ta->nr_allocated++;
-		dsprintk(NDEBUG_TAGS, instance, "using tag %d for target %d lun %d (%d tags allocated)\n",
-		         cmd->tag, scmd_id(cmd), lun, ta->nr_allocated);
-	}
-}
-
-
-/* Mark the tag of command 'cmd' as free, or in case of an untagged command,
- * unlock the LUN.
- */
-
-static void cmd_free_tag(struct scsi_cmnd *cmd)
-{
-	u8 lun = cmd->device->lun;
-	struct Scsi_Host *instance = cmd->device->host;
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	if (cmd->tag == TAG_NONE) {
-		hostdata->busy[cmd->device->id] &= ~(1 << lun);
-		dsprintk(NDEBUG_TAGS, instance, "target %d lun %d untagged cmd freed\n",
-		         scmd_id(cmd), lun);
-	} else if (cmd->tag >= MAX_TAGS) {
-		shost_printk(KERN_NOTICE, instance,
-		             "trying to free bad tag %d!\n", cmd->tag);
-	} else {
-		struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
-		clear_bit(cmd->tag, ta->allocated);
-		ta->nr_allocated--;
-		dsprintk(NDEBUG_TAGS, instance, "freed tag %d for target %d lun %d\n",
-		         cmd->tag, scmd_id(cmd), lun);
-	}
-}
-
-
-static void free_all_tags(struct NCR5380_hostdata *hostdata)
-{
-	int target, lun;
-	struct tag_alloc *ta;
-
-	if (!(hostdata->flags & FLAG_TAGGED_QUEUING))
-		return;
-
-	for (target = 0; target < 8; ++target) {
-		for (lun = 0; lun < 8; ++lun) {
-			ta = &hostdata->TagAlloc[target][lun];
-			bitmap_zero(ta->allocated, MAX_TAGS);
-			ta->nr_allocated = 0;
-		}
-	}
-}
-
-#endif /* SUPPORT_TAGS */
-
-/**
- * merge_contiguous_buffers - coalesce scatter-gather list entries
- * @cmd: command requesting IO
- *
- * Try to merge several scatter-gather buffers into one DMA transfer.
- * This is possible if the scatter buffers lie on physically
- * contiguous addresses. The first scatter-gather buffer's data are
- * assumed to be already transferred into cmd->SCp.this_residual.
- * Every buffer merged avoids an interrupt and a DMA setup operation.
- */
-
-static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
-{
-#if !defined(CONFIG_SUN3)
-	unsigned long endaddr;
-#if (NDEBUG & NDEBUG_MERGING)
-	unsigned long oldlen = cmd->SCp.this_residual;
-	int cnt = 1;
-#endif
-
-	for (endaddr = virt_to_phys(cmd->SCp.ptr + cmd->SCp.this_residual - 1) + 1;
-	     cmd->SCp.buffers_residual &&
-	     virt_to_phys(sg_virt(&cmd->SCp.buffer[1])) == endaddr;) {
-		dprintk(NDEBUG_MERGING, "VTOP(%p) == %08lx -> merging\n",
-			   page_address(sg_page(&cmd->SCp.buffer[1])), endaddr);
-#if (NDEBUG & NDEBUG_MERGING)
-		++cnt;
-#endif
-		++cmd->SCp.buffer;
-		--cmd->SCp.buffers_residual;
-		cmd->SCp.this_residual += cmd->SCp.buffer->length;
-		endaddr += cmd->SCp.buffer->length;
-	}
-#if (NDEBUG & NDEBUG_MERGING)
-	if (oldlen != cmd->SCp.this_residual)
-		dprintk(NDEBUG_MERGING, "merged %d buffers from %p, new length %08x\n",
-			   cnt, cmd->SCp.ptr, cmd->SCp.this_residual);
-#endif
-#endif /* !defined(CONFIG_SUN3) */
-}
-
-/**
- * initialize_SCp - init the scsi pointer field
- * @cmd: command block to set up
- *
- * Set up the internal fields in the SCSI command.
- */
-
-static inline void initialize_SCp(struct scsi_cmnd *cmd)
-{
-	/*
-	 * Initialize the Scsi Pointer field so that all of the commands in the
-	 * various queues are valid.
-	 */
-
-	if (scsi_bufflen(cmd)) {
-		cmd->SCp.buffer = scsi_sglist(cmd);
-		cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
-		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-		cmd->SCp.this_residual = cmd->SCp.buffer->length;
-
-		merge_contiguous_buffers(cmd);
-	} else {
-		cmd->SCp.buffer = NULL;
-		cmd->SCp.buffers_residual = 0;
-		cmd->SCp.ptr = NULL;
-		cmd->SCp.this_residual = 0;
-	}
-
-	cmd->SCp.Status = 0;
-	cmd->SCp.Message = 0;
-}
-
-/**
- * NCR5380_poll_politely2 - wait for two chip register values
- * @instance: controller to poll
- * @reg1: 5380 register to poll
- * @bit1: Bitmask to check
- * @val1: Expected value
- * @reg2: Second 5380 register to poll
- * @bit2: Second bitmask to check
- * @val2: Second expected value
- * @wait: Time-out in jiffies
- *
- * Polls the chip in a reasonably efficient manner waiting for an
- * event to occur. After a short quick poll we begin to yield the CPU
- * (if possible). In irq contexts the time-out is arbitrarily limited.
- * Callers may hold locks as long as they are held in irq mode.
- *
- * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT.
- */
-
-static int NCR5380_poll_politely2(struct Scsi_Host *instance,
-                                  int reg1, int bit1, int val1,
-                                  int reg2, int bit2, int val2, int wait)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned long deadline = jiffies + wait;
-	unsigned long n;
-
-	/* Busy-wait for up to 10 ms */
-	n = min(10000U, jiffies_to_usecs(wait));
-	n *= hostdata->accesses_per_ms;
-	n /= 2000;
-	do {
-		if ((NCR5380_read(reg1) & bit1) == val1)
-			return 0;
-		if ((NCR5380_read(reg2) & bit2) == val2)
-			return 0;
-		cpu_relax();
-	} while (n--);
-
-	if (irqs_disabled() || in_interrupt())
-		return -ETIMEDOUT;
-
-	/* Repeatedly sleep for 1 ms until deadline */
-	while (time_is_after_jiffies(deadline)) {
-		schedule_timeout_uninterruptible(1);
-		if ((NCR5380_read(reg1) & bit1) == val1)
-			return 0;
-		if ((NCR5380_read(reg2) & bit2) == val2)
-			return 0;
-	}
-
-	return -ETIMEDOUT;
-}
-
-static inline int NCR5380_poll_politely(struct Scsi_Host *instance,
-                                        int reg, int bit, int val, int wait)
-{
-	return NCR5380_poll_politely2(instance, reg, bit, val,
-	                                        reg, bit, val, wait);
-}
-
-#if NDEBUG
-static struct {
-	unsigned char mask;
-	const char *name;
-} signals[] = {
-	{SR_DBP, "PARITY"},
-	{SR_RST, "RST"},
-	{SR_BSY, "BSY"},
-	{SR_REQ, "REQ"},
-	{SR_MSG, "MSG"},
-	{SR_CD, "CD"},
-	{SR_IO, "IO"},
-	{SR_SEL, "SEL"},
-	{0, NULL}
-},
-basrs[] = {
-	{BASR_ATN, "ATN"},
-	{BASR_ACK, "ACK"},
-	{0, NULL}
-},
-icrs[] = {
-	{ICR_ASSERT_RST, "ASSERT RST"},
-	{ICR_ASSERT_ACK, "ASSERT ACK"},
-	{ICR_ASSERT_BSY, "ASSERT BSY"},
-	{ICR_ASSERT_SEL, "ASSERT SEL"},
-	{ICR_ASSERT_ATN, "ASSERT ATN"},
-	{ICR_ASSERT_DATA, "ASSERT DATA"},
-	{0, NULL}
-},
-mrs[] = {
-	{MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
-	{MR_TARGET, "MODE TARGET"},
-	{MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
-	{MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
-	{MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
-	{MR_MONITOR_BSY, "MODE MONITOR BSY"},
-	{MR_DMA_MODE, "MODE DMA"},
-	{MR_ARBITRATE, "MODE ARBITRATION"},
-	{0, NULL}
-};
-
-/**
- * NCR5380_print - print scsi bus signals
- * @instance: adapter state to dump
- *
- * Print the SCSI bus signals for debugging purposes
- */
-
-static void NCR5380_print(struct Scsi_Host *instance)
-{
-	unsigned char status, data, basr, mr, icr, i;
-
-	data = NCR5380_read(CURRENT_SCSI_DATA_REG);
-	status = NCR5380_read(STATUS_REG);
-	mr = NCR5380_read(MODE_REG);
-	icr = NCR5380_read(INITIATOR_COMMAND_REG);
-	basr = NCR5380_read(BUS_AND_STATUS_REG);
-
-	printk("STATUS_REG: %02x ", status);
-	for (i = 0; signals[i].mask; ++i)
-		if (status & signals[i].mask)
-			printk(",%s", signals[i].name);
-	printk("\nBASR: %02x ", basr);
-	for (i = 0; basrs[i].mask; ++i)
-		if (basr & basrs[i].mask)
-			printk(",%s", basrs[i].name);
-	printk("\nICR: %02x ", icr);
-	for (i = 0; icrs[i].mask; ++i)
-		if (icr & icrs[i].mask)
-			printk(",%s", icrs[i].name);
-	printk("\nMODE: %02x ", mr);
-	for (i = 0; mrs[i].mask; ++i)
-		if (mr & mrs[i].mask)
-			printk(",%s", mrs[i].name);
-	printk("\n");
-}
-
-static struct {
-	unsigned char value;
-	const char *name;
-} phases[] = {
-	{PHASE_DATAOUT, "DATAOUT"},
-	{PHASE_DATAIN, "DATAIN"},
-	{PHASE_CMDOUT, "CMDOUT"},
-	{PHASE_STATIN, "STATIN"},
-	{PHASE_MSGOUT, "MSGOUT"},
-	{PHASE_MSGIN, "MSGIN"},
-	{PHASE_UNKNOWN, "UNKNOWN"}
-};
-
-/**
- * NCR5380_print_phase - show SCSI phase
- * @instance: adapter to dump
- *
- * Print the current SCSI phase for debugging purposes
- */
-
-static void NCR5380_print_phase(struct Scsi_Host *instance)
-{
-	unsigned char status;
-	int i;
-
-	status = NCR5380_read(STATUS_REG);
-	if (!(status & SR_REQ))
-		shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n");
-	else {
-		for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
-		     (phases[i].value != (status & PHASE_MASK)); ++i)
-			;
-		shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
-	}
-}
-#endif
-
-/**
- * NCR58380_info - report driver and host information
- * @instance: relevant scsi host instance
- *
- * For use as the host template info() handler.
- */
-
-static const char *NCR5380_info(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	return hostdata->info;
-}
-
-static void prepare_info(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	snprintf(hostdata->info, sizeof(hostdata->info),
-	         "%s, io_port 0x%lx, n_io_port %d, "
-	         "base 0x%lx, irq %d, "
-	         "can_queue %d, cmd_per_lun %d, "
-	         "sg_tablesize %d, this_id %d, "
-	         "flags { %s%s}, "
-	         "options { %s} ",
-	         instance->hostt->name, instance->io_port, instance->n_io_port,
-	         instance->base, instance->irq,
-	         instance->can_queue, instance->cmd_per_lun,
-	         instance->sg_tablesize, instance->this_id,
-	         hostdata->flags & FLAG_TAGGED_QUEUING ? "TAGGED_QUEUING " : "",
-	         hostdata->flags & FLAG_TOSHIBA_DELAY  ? "TOSHIBA_DELAY "  : "",
-#ifdef DIFFERENTIAL
-	         "DIFFERENTIAL "
-#endif
-#ifdef REAL_DMA
-	         "REAL_DMA "
-#endif
-#ifdef PARITY
-	         "PARITY "
-#endif
-#ifdef SUPPORT_TAGS
-	         "SUPPORT_TAGS "
-#endif
-	         "");
-}
-
-/**
- * NCR5380_init - initialise an NCR5380
- * @instance: adapter to configure
- * @flags: control flags
- *
- * Initializes *instance and corresponding 5380 chip,
- * with flags OR'd into the initial flags value.
- *
- * Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
- *
- * Returns 0 for success
- */
-
-static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	int i;
-	unsigned long deadline;
-
-	hostdata->host = instance;
-	hostdata->id_mask = 1 << instance->this_id;
-	hostdata->id_higher_mask = 0;
-	for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
-		if (i > hostdata->id_mask)
-			hostdata->id_higher_mask |= i;
-	for (i = 0; i < 8; ++i)
-		hostdata->busy[i] = 0;
-#ifdef SUPPORT_TAGS
-	init_tags(hostdata);
-#endif
-#if defined (REAL_DMA)
-	hostdata->dma_len = 0;
-#endif
-	spin_lock_init(&hostdata->lock);
-	hostdata->connected = NULL;
-	hostdata->sensing = NULL;
-	INIT_LIST_HEAD(&hostdata->autosense);
-	INIT_LIST_HEAD(&hostdata->unissued);
-	INIT_LIST_HEAD(&hostdata->disconnected);
-
-	hostdata->flags = flags;
-
-	INIT_WORK(&hostdata->main_task, NCR5380_main);
-	hostdata->work_q = alloc_workqueue("ncr5380_%d",
-	                        WQ_UNBOUND | WQ_MEM_RECLAIM,
-	                        1, instance->host_no);
-	if (!hostdata->work_q)
-		return -ENOMEM;
-
-	prepare_info(instance);
-
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-	NCR5380_write(MODE_REG, MR_BASE);
-	NCR5380_write(TARGET_COMMAND_REG, 0);
-	NCR5380_write(SELECT_ENABLE_REG, 0);
-
-	/* Calibrate register polling loop */
-	i = 0;
-	deadline = jiffies + 1;
-	do {
-		cpu_relax();
-	} while (time_is_after_jiffies(deadline));
-	deadline += msecs_to_jiffies(256);
-	do {
-		NCR5380_read(STATUS_REG);
-		++i;
-		cpu_relax();
-	} while (time_is_after_jiffies(deadline));
-	hostdata->accesses_per_ms = i / 256;
-
-	return 0;
-}
-
-/**
- * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems.
- * @instance: adapter to check
- *
- * If the system crashed, it may have crashed with a connected target and
- * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the
- * currently established nexus, which we know nothing about. Failing that
- * do a bus reset.
- *
- * Note that a bus reset will cause the chip to assert IRQ.
- *
- * Returns 0 if successful, otherwise -ENXIO.
- */
-
-static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	int pass;
-
-	for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
-		switch (pass) {
-		case 1:
-		case 3:
-		case 5:
-			shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
-			NCR5380_poll_politely(instance,
-			                      STATUS_REG, SR_BSY, 0, 5 * HZ);
-			break;
-		case 2:
-			shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n");
-			do_abort(instance);
-			break;
-		case 4:
-			shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
-			do_reset(instance);
-			/* Wait after a reset; the SCSI standard calls for
-			 * 250ms, we wait 500ms to be on the safe side.
-			 * But some Toshiba CD-ROMs need ten times that.
-			 */
-			if (hostdata->flags & FLAG_TOSHIBA_DELAY)
-				msleep(2500);
-			else
-				msleep(500);
-			break;
-		case 6:
-			shost_printk(KERN_ERR, instance, "bus locked solid\n");
-			return -ENXIO;
-		}
-	}
-	return 0;
-}
-
-/**
- * NCR5380_exit - remove an NCR5380
- * @instance: adapter to remove
- *
- * Assumes that no more work can be queued (e.g. by NCR5380_intr).
- */
-
-static void NCR5380_exit(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	cancel_work_sync(&hostdata->main_task);
-	destroy_workqueue(hostdata->work_q);
-}
-
-/**
- * complete_cmd - finish processing a command and return it to the SCSI ML
- * @instance: the host instance
- * @cmd: command to complete
- */
-
-static void complete_cmd(struct Scsi_Host *instance,
-                         struct scsi_cmnd *cmd)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
-
-	if (hostdata->sensing == cmd) {
-		/* Autosense processing ends here */
-		if ((cmd->result & 0xff) != SAM_STAT_GOOD) {
-			scsi_eh_restore_cmnd(cmd, &hostdata->ses);
-			set_host_byte(cmd, DID_ERROR);
-		} else
-			scsi_eh_restore_cmnd(cmd, &hostdata->ses);
-		hostdata->sensing = NULL;
-	}
-
-#ifdef SUPPORT_TAGS
-	cmd_free_tag(cmd);
-#else
-	hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
-#endif
-	cmd->scsi_done(cmd);
-}
-
-/**
- * NCR5380_queue_command - queue a command
- * @instance: the relevant SCSI adapter
- * @cmd: SCSI command
- *
- * cmd is added to the per-instance issue queue, with minor
- * twiddling done to the host specific fields of cmd.  If the
- * main coroutine is not running, it is restarted.
- */
-
-static int NCR5380_queue_command(struct Scsi_Host *instance,
-                                 struct scsi_cmnd *cmd)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
-	unsigned long flags;
-
-#if (NDEBUG & NDEBUG_NO_WRITE)
-	switch (cmd->cmnd[0]) {
-	case WRITE_6:
-	case WRITE_10:
-		shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n");
-		cmd->result = (DID_ERROR << 16);
-		cmd->scsi_done(cmd);
-		return 0;
-	}
-#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
-
-	cmd->result = 0;
-
-	/*
-	 * ++roman: Just disabling the NCR interrupt isn't sufficient here,
-	 * because also a timer int can trigger an abort or reset, which would
-	 * alter queues and touch the lock.
-	 */
-	if (!NCR5380_acquire_dma_irq(instance))
-		return SCSI_MLQUEUE_HOST_BUSY;
-
-	spin_lock_irqsave(&hostdata->lock, flags);
-
-	/*
-	 * Insert the cmd into the issue queue. Note that REQUEST SENSE
-	 * commands are added to the head of the queue since any command will
-	 * clear the contingent allegiance condition that exists and the
-	 * sense data is only guaranteed to be valid while the condition exists.
-	 */
-
-	if (cmd->cmnd[0] == REQUEST_SENSE)
-		list_add(&ncmd->list, &hostdata->unissued);
-	else
-		list_add_tail(&ncmd->list, &hostdata->unissued);
-
-	spin_unlock_irqrestore(&hostdata->lock, flags);
-
-	dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
-	         cmd, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
-
-	/* Kick off command processing */
-	queue_work(hostdata->work_q, &hostdata->main_task);
-	return 0;
-}
-
-static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	/* Caller does the locking needed to set & test these data atomically */
-	if (list_empty(&hostdata->disconnected) &&
-	    list_empty(&hostdata->unissued) &&
-	    list_empty(&hostdata->autosense) &&
-	    !hostdata->connected &&
-	    !hostdata->selecting)
-		NCR5380_release_dma_irq(instance);
-}
-
-/**
- * dequeue_next_cmd - dequeue a command for processing
- * @instance: the scsi host instance
- *
- * Priority is given to commands on the autosense queue. These commands
- * need autosense because of a CHECK CONDITION result.
- *
- * Returns a command pointer if a command is found for a target that is
- * not already busy. Otherwise returns NULL.
- */
-
-static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	struct NCR5380_cmd *ncmd;
-	struct scsi_cmnd *cmd;
-
-	if (hostdata->sensing || list_empty(&hostdata->autosense)) {
-		list_for_each_entry(ncmd, &hostdata->unissued, list) {
-			cmd = NCR5380_to_scmd(ncmd);
-			dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n",
-			         cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun);
-
-			if (
-#ifdef SUPPORT_TAGS
-			    !is_lun_busy(cmd, 1)
-#else
-			    !(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun))
-#endif
-			) {
-				list_del(&ncmd->list);
-				dsprintk(NDEBUG_QUEUES, instance,
-				         "dequeue: removed %p from issue queue\n", cmd);
-				return cmd;
-			}
-		}
-	} else {
-		/* Autosense processing begins here */
-		ncmd = list_first_entry(&hostdata->autosense,
-		                        struct NCR5380_cmd, list);
-		list_del(&ncmd->list);
-		cmd = NCR5380_to_scmd(ncmd);
-		dsprintk(NDEBUG_QUEUES, instance,
-		         "dequeue: removed %p from autosense queue\n", cmd);
-		scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
-		hostdata->sensing = cmd;
-		return cmd;
-	}
-	return NULL;
-}
-
-static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
-
-	if (hostdata->sensing == cmd) {
-		scsi_eh_restore_cmnd(cmd, &hostdata->ses);
-		list_add(&ncmd->list, &hostdata->autosense);
-		hostdata->sensing = NULL;
-	} else
-		list_add(&ncmd->list, &hostdata->unissued);
-}
-
-/**
- * NCR5380_main - NCR state machines
- *
- * NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system.  Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
- * in case it is not running.
- */
-
-static void NCR5380_main(struct work_struct *work)
-{
-	struct NCR5380_hostdata *hostdata =
-		container_of(work, struct NCR5380_hostdata, main_task);
-	struct Scsi_Host *instance = hostdata->host;
-	int done;
-
-	/*
-	 * ++roman: Just disabling the NCR interrupt isn't sufficient here,
-	 * because also a timer int can trigger an abort or reset, which can
-	 * alter queues and touch the Falcon lock.
-	 */
-
-	do {
-		done = 1;
-
-		spin_lock_irq(&hostdata->lock);
-		while (!hostdata->connected && !hostdata->selecting) {
-			struct scsi_cmnd *cmd = dequeue_next_cmd(instance);
-
-			if (!cmd)
-				break;
-
-			dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd);
-
-			/*
-			 * Attempt to establish an I_T_L nexus here.
-			 * On success, instance->hostdata->connected is set.
-			 * On failure, we must add the command back to the
-			 * issue queue so we can keep trying.
-			 */
-			/*
-			 * REQUEST SENSE commands are issued without tagged
-			 * queueing, even on SCSI-II devices because the
-			 * contingent allegiance condition exists for the
-			 * entire unit.
-			 */
-			/* ++roman: ...and the standard also requires that
-			 * REQUEST SENSE command are untagged.
-			 */
-
-#ifdef SUPPORT_TAGS
-			cmd_get_tag(cmd, cmd->cmnd[0] != REQUEST_SENSE);
-#endif
-			if (!NCR5380_select(instance, cmd)) {
-				dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
-				maybe_release_dma_irq(instance);
-			} else {
-				dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
-				         "main: select failed, returning %p to queue\n", cmd);
-				requeue_cmd(instance, cmd);
-#ifdef SUPPORT_TAGS
-				cmd_free_tag(cmd);
-#endif
-			}
-		}
-		if (hostdata->connected
-#ifdef REAL_DMA
-		    && !hostdata->dma_len
-#endif
-		    ) {
-			dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
-			NCR5380_information_transfer(instance);
-			done = 0;
-		}
-		spin_unlock_irq(&hostdata->lock);
-		if (!done)
-			cond_resched();
-	} while (!done);
-}
-
-
-#ifdef REAL_DMA
-/*
- * Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
- *
- * Purpose : Called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
- *
- * Inputs : instance - this instance of the NCR5380.
- */
-
-static void NCR5380_dma_complete(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	int transferred;
-	unsigned char **data;
-	int *count;
-	int saved_data = 0, overrun = 0;
-	unsigned char p;
-
-	if (hostdata->read_overruns) {
-		p = hostdata->connected->SCp.phase;
-		if (p & SR_IO) {
-			udelay(10);
-			if ((NCR5380_read(BUS_AND_STATUS_REG) &
-			     (BASR_PHASE_MATCH|BASR_ACK)) ==
-			    (BASR_PHASE_MATCH|BASR_ACK)) {
-				saved_data = NCR5380_read(INPUT_DATA_REG);
-				overrun = 1;
-				dsprintk(NDEBUG_DMA, instance, "read overrun handled\n");
-			}
-		}
-	}
-
-#if defined(CONFIG_SUN3)
-	if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
-		pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
-		       instance->host_no);
-		BUG();
-	}
-
-	/* make sure we're not stuck in a data phase */
-	if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
-	    (BASR_PHASE_MATCH | BASR_ACK)) {
-		pr_err("scsi%d: BASR %02x\n", instance->host_no,
-		       NCR5380_read(BUS_AND_STATUS_REG));
-		pr_err("scsi%d: bus stuck in data phase -- probably a single byte overrun!\n",
-		       instance->host_no);
-		BUG();
-	}
-#endif
-
-	NCR5380_write(MODE_REG, MR_BASE);
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
-	transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
-	hostdata->dma_len = 0;
-
-	data = (unsigned char **)&hostdata->connected->SCp.ptr;
-	count = &hostdata->connected->SCp.this_residual;
-	*data += transferred;
-	*count -= transferred;
-
-	if (hostdata->read_overruns) {
-		int cnt, toPIO;
-
-		if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
-			cnt = toPIO = hostdata->read_overruns;
-			if (overrun) {
-				dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
-				*(*data)++ = saved_data;
-				(*count)--;
-				cnt--;
-				toPIO--;
-			}
-			dprintk(NDEBUG_DMA, "Doing %d-byte PIO to 0x%08lx\n", cnt, (long)*data);
-			NCR5380_transfer_pio(instance, &p, &cnt, data);
-			*count -= toPIO - cnt;
-		}
-	}
-}
-#endif /* REAL_DMA */
-
-
-/**
- * NCR5380_intr - generic NCR5380 irq handler
- * @irq: interrupt number
- * @dev_id: device info
- *
- * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
- * from the disconnected queue, and restarting NCR5380_main()
- * as required.
- *
- * The chip can assert IRQ in any of six different conditions. The IRQ flag
- * is then cleared by reading the Reset Parity/Interrupt Register (RPIR).
- * Three of these six conditions are latched in the Bus and Status Register:
- * - End of DMA (cleared by ending DMA Mode)
- * - Parity error (cleared by reading RPIR)
- * - Loss of BSY (cleared by reading RPIR)
- * Two conditions have flag bits that are not latched:
- * - Bus phase mismatch (non-maskable in DMA Mode, cleared by ending DMA Mode)
- * - Bus reset (non-maskable)
- * The remaining condition has no flag bit at all:
- * - Selection/reselection
- *
- * Hence, establishing the cause(s) of any interrupt is partly guesswork.
- * In "The DP8490 and DP5380 Comparison Guide", National Semiconductor
- * claimed that "the design of the [DP8490] interrupt logic ensures
- * interrupts will not be lost (they can be on the DP5380)."
- * The L5380/53C80 datasheet from LOGIC Devices has more details.
- *
- * Checking for bus reset by reading RST is futile because of interrupt
- * latency, but a bus reset will reset chip logic. Checking for parity error
- * is unnecessary because that interrupt is never enabled. A Loss of BSY
- * condition will clear DMA Mode. We can tell when this occurs because the
- * the Busy Monitor interrupt is enabled together with DMA Mode.
- */
-
-static irqreturn_t NCR5380_intr(int irq, void *dev_id)
-{
-	struct Scsi_Host *instance = dev_id;
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	int handled = 0;
-	unsigned char basr;
-	unsigned long flags;
-
-	spin_lock_irqsave(&hostdata->lock, flags);
-
-	basr = NCR5380_read(BUS_AND_STATUS_REG);
-	if (basr & BASR_IRQ) {
-		unsigned char mr = NCR5380_read(MODE_REG);
-		unsigned char sr = NCR5380_read(STATUS_REG);
-
-		dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
-		         irq, basr, sr, mr);
-
-#if defined(REAL_DMA)
-		if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
-			/* Probably End of DMA, Phase Mismatch or Loss of BSY.
-			 * We ack IRQ after clearing Mode Register. Workarounds
-			 * for End of DMA errata need to happen in DMA Mode.
-			 */
-
-			dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
-
-			if (hostdata->connected) {
-				NCR5380_dma_complete(instance);
-				queue_work(hostdata->work_q, &hostdata->main_task);
-			} else {
-				NCR5380_write(MODE_REG, MR_BASE);
-				NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-			}
-		} else
-#endif /* REAL_DMA */
-		if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
-		    (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
-			/* Probably reselected */
-			NCR5380_write(SELECT_ENABLE_REG, 0);
-			NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
-			dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n");
-
-			if (!hostdata->connected) {
-				NCR5380_reselect(instance);
-				queue_work(hostdata->work_q, &hostdata->main_task);
-			}
-			if (!hostdata->connected)
-				NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-		} else {
-			/* Probably Bus Reset */
-			NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
-			dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
-#ifdef SUN3_SCSI_VME
-			dregs->csr |= CSR_DMA_ENABLE;
-#endif
-		}
-		handled = 1;
-	} else {
-		shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
-#ifdef SUN3_SCSI_VME
-		dregs->csr |= CSR_DMA_ENABLE;
-#endif
-	}
-
-	spin_unlock_irqrestore(&hostdata->lock, flags);
-
-	return IRQ_RETVAL(handled);
-}
-
-/*
- * Function : int NCR5380_select(struct Scsi_Host *instance,
- * struct scsi_cmnd *cmd)
- *
- * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
- *
- * Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute.
- *
- * Returns cmd if selection failed but should be retried,
- * NULL if selection failed and should not be retried, or
- * NULL if selection succeeded (hostdata->connected == cmd).
- *
- * Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
- * with registers as they should have been on entry - ie
- * SELECT_ENABLE will be set appropriately, the NCR5380
- * will cease to drive any SCSI bus signals.
- *
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
- * SELECT interrupt will be disabled.
- *
- * If failed (no target) : cmd->scsi_done() will be called, and the
- * cmd->result host byte set to DID_BAD_TARGET.
- */
-
-static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
-                                        struct scsi_cmnd *cmd)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned char tmp[3], phase;
-	unsigned char *data;
-	int len;
-	int err;
-
-	NCR5380_dprint(NDEBUG_ARBITRATION, instance);
-	dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
-	         instance->this_id);
-
-	/*
-	 * Arbitration and selection phases are slow and involve dropping the
-	 * lock, so we have to watch out for EH. An exception handler may
-	 * change 'selecting' to NULL. This function will then return NULL
-	 * so that the caller will forget about 'cmd'. (During information
-	 * transfer phases, EH may change 'connected' to NULL.)
-	 */
-	hostdata->selecting = cmd;
-
-	/*
-	 * Set the phase bits to 0, otherwise the NCR5380 won't drive the
-	 * data bus during SELECTION.
-	 */
-
-	NCR5380_write(TARGET_COMMAND_REG, 0);
-
-	/*
-	 * Start arbitration.
-	 */
-
-	NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
-	NCR5380_write(MODE_REG, MR_ARBITRATE);
-
-	/* The chip now waits for BUS FREE phase. Then after the 800 ns
-	 * Bus Free Delay, arbitration will begin.
-	 */
-
-	spin_unlock_irq(&hostdata->lock);
-	err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
-	                INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
-	                                       ICR_ARBITRATION_PROGRESS, HZ);
-	spin_lock_irq(&hostdata->lock);
-	if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
-		/* Reselection interrupt */
-		goto out;
-	}
-	if (!hostdata->selecting) {
-		/* Command was aborted */
-		NCR5380_write(MODE_REG, MR_BASE);
-		goto out;
-	}
-	if (err < 0) {
-		NCR5380_write(MODE_REG, MR_BASE);
-		shost_printk(KERN_ERR, instance,
-		             "select: arbitration timeout\n");
-		goto out;
-	}
-	spin_unlock_irq(&hostdata->lock);
-
-	/* The SCSI-2 arbitration delay is 2.4 us */
-	udelay(3);
-
-	/* Check for lost arbitration */
-	if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
-	    (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
-	    (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
-		NCR5380_write(MODE_REG, MR_BASE);
-		dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
-		spin_lock_irq(&hostdata->lock);
-		goto out;
-	}
-
-	/* After/during arbitration, BSY should be asserted.
-	 * IBM DPES-31080 Version S31Q works now
-	 * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman)
-	 */
-	NCR5380_write(INITIATOR_COMMAND_REG,
-		      ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
-
-	/*
-	 * Again, bus clear + bus settle time is 1.2us, however, this is
-	 * a minimum so we'll udelay ceil(1.2)
-	 */
-
-	if (hostdata->flags & FLAG_TOSHIBA_DELAY)
-		udelay(15);
-	else
-		udelay(2);
-
-	spin_lock_irq(&hostdata->lock);
-
-	/* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
-	if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
-		goto out;
-
-	if (!hostdata->selecting) {
-		NCR5380_write(MODE_REG, MR_BASE);
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		goto out;
-	}
-
-	dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
-
-	/*
-	 * Now that we have won arbitration, start Selection process, asserting
-	 * the host and target ID's on the SCSI bus.
-	 */
-
-	NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask | (1 << scmd_id(cmd)));
-
-	/*
-	 * Raise ATN while SEL is true before BSY goes false from arbitration,
-	 * since this is the only way to guarantee that we'll get a MESSAGE OUT
-	 * phase immediately after selection.
-	 */
-
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY |
-	              ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL);
-	NCR5380_write(MODE_REG, MR_BASE);
-
-	/*
-	 * Reselect interrupts must be turned off prior to the dropping of BSY,
-	 * otherwise we will trigger an interrupt.
-	 */
-	NCR5380_write(SELECT_ENABLE_REG, 0);
-
-	spin_unlock_irq(&hostdata->lock);
-
-	/*
-	 * The initiator shall then wait at least two deskew delays and release
-	 * the BSY signal.
-	 */
-	udelay(1);        /* wingel -- wait two bus deskew delay >2*45ns */
-
-	/* Reset BSY */
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA |
-	              ICR_ASSERT_ATN | ICR_ASSERT_SEL);
-
-	/*
-	 * Something weird happens when we cease to drive BSY - looks
-	 * like the board/chip is letting us do another read before the
-	 * appropriate propagation delay has expired, and we're confusing
-	 * a BSY signal from ourselves as the target's response to SELECTION.
-	 *
-	 * A small delay (the 'C++' frontend breaks the pipeline with an
-	 * unnecessary jump, making it work on my 386-33/Trantor T128, the
-	 * tighter 'C' code breaks and requires this) solves the problem -
-	 * the 1 us delay is arbitrary, and only used because this delay will
-	 * be the same on other platforms and since it works here, it should
-	 * work there.
-	 *
-	 * wingel suggests that this could be due to failing to wait
-	 * one deskew delay.
-	 */
-
-	udelay(1);
-
-	dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
-
-	/*
-	 * The SCSI specification calls for a 250 ms timeout for the actual
-	 * selection.
-	 */
-
-	err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY,
-	                            msecs_to_jiffies(250));
-
-	if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
-		spin_lock_irq(&hostdata->lock);
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		NCR5380_reselect(instance);
-		if (!hostdata->connected)
-			NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-		shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n");
-		goto out;
-	}
-
-	if (err < 0) {
-		spin_lock_irq(&hostdata->lock);
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-		/* Can't touch cmd if it has been reclaimed by the scsi ML */
-		if (hostdata->selecting) {
-			cmd->result = DID_BAD_TARGET << 16;
-			complete_cmd(instance, cmd);
-			dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n");
-			cmd = NULL;
-		}
-		goto out;
-	}
-
-	/*
-	 * No less than two deskew delays after the initiator detects the
-	 * BSY signal is true, it shall release the SEL signal and may
-	 * change the DATA BUS.                                     -wingel
-	 */
-
-	udelay(1);
-
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-
-	/*
-	 * Since we followed the SCSI spec, and raised ATN while SEL
-	 * was true but before BSY was false during selection, the information
-	 * transfer phase should be a MESSAGE OUT phase so that we can send the
-	 * IDENTIFY message.
-	 *
-	 * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG
-	 * message (2 bytes) with a tag ID that we increment with every command
-	 * until it wraps back to 0.
-	 *
-	 * XXX - it turns out that there are some broken SCSI-II devices,
-	 * which claim to support tagged queuing but fail when more than
-	 * some number of commands are issued at once.
-	 */
-
-	/* Wait for start of REQ/ACK handshake */
-
-	err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
-	spin_lock_irq(&hostdata->lock);
-	if (err < 0) {
-		shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-		goto out;
-	}
-	if (!hostdata->selecting) {
-		do_abort(instance);
-		goto out;
-	}
-
-	dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
-	         scmd_id(cmd));
-	tmp[0] = IDENTIFY(1, cmd->device->lun);
-
-#ifdef SUPPORT_TAGS
-	if (cmd->tag != TAG_NONE) {
-		tmp[1] = hostdata->last_message = SIMPLE_QUEUE_TAG;
-		tmp[2] = cmd->tag;
-		len = 3;
-	} else
-		len = 1;
-#else
-	len = 1;
-	cmd->tag = 0;
-#endif /* SUPPORT_TAGS */
-
-	/* Send message(s) */
-	data = tmp;
-	phase = PHASE_MSGOUT;
-	NCR5380_transfer_pio(instance, &phase, &len, &data);
-	dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
-	/* XXX need to handle errors here */
-
-	hostdata->connected = cmd;
-#ifndef SUPPORT_TAGS
-	hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun;
-#endif
-#ifdef SUN3_SCSI_VME
-	dregs->csr |= CSR_INTR;
-#endif
-
-	initialize_SCp(cmd);
-
-	cmd = NULL;
-
-out:
-	if (!hostdata->selecting)
-		return NULL;
-	hostdata->selecting = NULL;
-	return cmd;
-}
-
-/*
- * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
- *
- * Purpose : transfers data in given phase using polled I/O
- *
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
- *
- * Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes are transferred or exit
- * is in same phase.
- *
- * Also, *phase, *count, *data are modified in place.
- *
- * XXX Note : handling for bus free may be useful.
- */
-
-/*
- * Note : this code is not as quick as it could be, however it
- * IS 100% reliable, and for the actual data transfer where speed
- * counts, we will always do a pseudo DMA or DMA transfer.
- */
-
-static int NCR5380_transfer_pio(struct Scsi_Host *instance,
-				unsigned char *phase, int *count,
-				unsigned char **data)
-{
-	unsigned char p = *phase, tmp;
-	int c = *count;
-	unsigned char *d = *data;
-
-	/*
-	 * The NCR5380 chip will only drive the SCSI bus when the
-	 * phase specified in the appropriate bits of the TARGET COMMAND
-	 * REGISTER match the STATUS REGISTER
-	 */
-
-	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-
-	do {
-		/*
-		 * Wait for assertion of REQ, after which the phase bits will be
-		 * valid
-		 */
-
-		if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
-			break;
-
-		dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
-
-		/* Check for phase mismatch */
-		if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
-			dsprintk(NDEBUG_PIO, instance, "phase mismatch\n");
-			NCR5380_dprint_phase(NDEBUG_PIO, instance);
-			break;
-		}
-
-		/* Do actual transfer from SCSI bus to / from memory */
-		if (!(p & SR_IO))
-			NCR5380_write(OUTPUT_DATA_REG, *d);
-		else
-			*d = NCR5380_read(CURRENT_SCSI_DATA_REG);
-
-		++d;
-
-		/*
-		 * The SCSI standard suggests that in MSGOUT phase, the initiator
-		 * should drop ATN on the last byte of the message phase
-		 * after REQ has been asserted for the handshake but before
-		 * the initiator raises ACK.
-		 */
-
-		if (!(p & SR_IO)) {
-			if (!((p & SR_MSG) && c > 1)) {
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
-				NCR5380_dprint(NDEBUG_PIO, instance);
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
-				              ICR_ASSERT_DATA | ICR_ASSERT_ACK);
-			} else {
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
-				              ICR_ASSERT_DATA | ICR_ASSERT_ATN);
-				NCR5380_dprint(NDEBUG_PIO, instance);
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
-				              ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
-			}
-		} else {
-			NCR5380_dprint(NDEBUG_PIO, instance);
-			NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
-		}
-
-		if (NCR5380_poll_politely(instance,
-		                          STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
-			break;
-
-		dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
-
-/*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1.  We were in MSGOUT phase, and we are on the last byte of the
- * message.  ATN must be dropped as ACK is dropped.
- *
- * 2.  We are in a MSGIN phase, and we are on the last byte of the
- * message.  We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
- *
- * 3.  ACK and ATN are clear and the target may proceed as normal.
- */
-		if (!(p == PHASE_MSGIN && c == 1)) {
-			if (p == PHASE_MSGOUT && c > 1)
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-			else
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		}
-	} while (--c);
-
-	dsprintk(NDEBUG_PIO, instance, "residual %d\n", c);
-
-	*count = c;
-	*data = d;
-	tmp = NCR5380_read(STATUS_REG);
-	/* The phase read from the bus is valid if either REQ is (already)
-	 * asserted or if ACK hasn't been released yet. The latter applies if
-	 * we're in MSG IN, DATA IN or STATUS and all bytes have been received.
-	 */
-	if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0))
-		*phase = tmp & PHASE_MASK;
-	else
-		*phase = PHASE_UNKNOWN;
-
-	if (!c || (*phase == p))
-		return 0;
-	else
-		return -1;
-}
-
-/**
- * do_reset - issue a reset command
- * @instance: adapter to reset
- *
- * Issue a reset sequence to the NCR5380 and try and get the bus
- * back into sane shape.
- *
- * This clears the reset interrupt flag because there may be no handler for
- * it. When the driver is initialized, the NCR5380_intr() handler has not yet
- * been installed. And when in EH we may have released the ST DMA interrupt.
- */
-
-static void do_reset(struct Scsi_Host *instance)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	NCR5380_write(TARGET_COMMAND_REG,
-	              PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
-	udelay(50);
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-	(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-	local_irq_restore(flags);
-}
-
-/**
- * do_abort - abort the currently established nexus by going to
- * MESSAGE OUT phase and sending an ABORT message.
- * @instance: relevant scsi host instance
- *
- * Returns 0 on success, -1 on failure.
- */
-
-static int do_abort(struct Scsi_Host *instance)
-{
-	unsigned char *msgptr, phase, tmp;
-	int len;
-	int rc;
-
-	/* Request message out phase */
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-
-	/*
-	 * Wait for the target to indicate a valid phase by asserting
-	 * REQ.  Once this happens, we'll have either a MSGOUT phase
-	 * and can immediately send the ABORT message, or we'll have some
-	 * other phase and will have to source/sink data.
-	 *
-	 * We really don't care what value was on the bus or what value
-	 * the target sees, so we just handshake.
-	 */
-
-	rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
-	if (rc < 0)
-		goto timeout;
-
-	tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
-
-	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
-
-	if (tmp != PHASE_MSGOUT) {
-		NCR5380_write(INITIATOR_COMMAND_REG,
-		              ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
-		rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
-		if (rc < 0)
-			goto timeout;
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-	}
-
-	tmp = ABORT;
-	msgptr = &tmp;
-	len = 1;
-	phase = PHASE_MSGOUT;
-	NCR5380_transfer_pio(instance, &phase, &len, &msgptr);
-
-	/*
-	 * If we got here, and the command completed successfully,
-	 * we're about to go into bus free state.
-	 */
-
-	return len ? -1 : 0;
-
-timeout:
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-	return -1;
-}
-
-#if defined(REAL_DMA)
-/*
- * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
- *
- * Purpose : transfers data in given phase using either real
- * or pseudo DMA.
- *
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
- *
- * Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
- *
- * Also, *phase, *count, *data are modified in place.
- */
-
-
-static int NCR5380_transfer_dma(struct Scsi_Host *instance,
-				unsigned char *phase, int *count,
-				unsigned char **data)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	register int c = *count;
-	register unsigned char p = *phase;
-
-#if defined(CONFIG_SUN3)
-	/* sanity check */
-	if (!sun3_dma_setup_done) {
-		pr_err("scsi%d: transfer_dma without setup!\n",
-		       instance->host_no);
-		BUG();
-	}
-	hostdata->dma_len = c;
-
-	dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
-	         (p & SR_IO) ? "receive" : "send", c, *data);
-
-	/* netbsd turns off ints here, why not be safe and do it too */
-
-	/* send start chain */
-	sun3scsi_dma_start(c, *data);
-
-	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-	NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
-	                        MR_ENABLE_EOP_INTR);
-	if (p & SR_IO) {
-		NCR5380_write(INITIATOR_COMMAND_REG, 0);
-		NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
-	} else {
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_DATA);
-		NCR5380_write(START_DMA_SEND_REG, 0);
-	}
-
-#ifdef SUN3_SCSI_VME
-	dregs->csr |= CSR_DMA_ENABLE;
-#endif
-
-	sun3_dma_active = 1;
-
-#else /* !defined(CONFIG_SUN3) */
-	register unsigned char *d = *data;
-	unsigned char tmp;
-
-	if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
-		*phase = tmp;
-		return -1;
-	}
-
-	if (hostdata->read_overruns && (p & SR_IO))
-		c -= hostdata->read_overruns;
-
-	dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
-	         (p & SR_IO) ? "receive" : "send", c, d);
-
-	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-	NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
-	                        MR_ENABLE_EOP_INTR);
-
-	if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) {
-		/* On the Medusa, it is a must to initialize the DMA before
-		 * starting the NCR. This is also the cleaner way for the TT.
-		 */
-		hostdata->dma_len = (p & SR_IO) ?
-			NCR5380_dma_read_setup(instance, d, c) :
-			NCR5380_dma_write_setup(instance, d, c);
-	}
-
-	if (p & SR_IO)
-		NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
-	else {
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
-		NCR5380_write(START_DMA_SEND_REG, 0);
-	}
-
-	if (hostdata->flags & FLAG_LATE_DMA_SETUP) {
-		/* On the Falcon, the DMA setup must be done after the last */
-		/* NCR access, else the DMA setup gets trashed!
-		 */
-		hostdata->dma_len = (p & SR_IO) ?
-			NCR5380_dma_read_setup(instance, d, c) :
-			NCR5380_dma_write_setup(instance, d, c);
-	}
-#endif /* !defined(CONFIG_SUN3) */
-
-	return 0;
-}
-#endif /* defined(REAL_DMA) */
-
-/*
- * Function : NCR5380_information_transfer (struct Scsi_Host *instance)
- *
- * Purpose : run through the various SCSI phases and do as the target
- * directs us to.  Operates on the currently connected command,
- * instance->connected.
- *
- * Inputs : instance, instance for which we are doing commands
- *
- * Side effects : SCSI things happen, the disconnected queue will be
- * modified if a command disconnects, *instance->connected will
- * change.
- *
- * XXX Note : we need to watch for bus free or a reset condition here
- * to recover from an unexpected bus free condition.
- */
-
-static void NCR5380_information_transfer(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned char msgout = NOP;
-	int sink = 0;
-	int len;
-	int transfersize;
-	unsigned char *data;
-	unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
-	struct scsi_cmnd *cmd;
-
-#ifdef SUN3_SCSI_VME
-	dregs->csr |= CSR_INTR;
-#endif
-
-	while ((cmd = hostdata->connected)) {
-		struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
-
-		tmp = NCR5380_read(STATUS_REG);
-		/* We only have a valid SCSI phase when REQ is asserted */
-		if (tmp & SR_REQ) {
-			phase = (tmp & PHASE_MASK);
-			if (phase != old_phase) {
-				old_phase = phase;
-				NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
-			}
-#if defined(CONFIG_SUN3)
-			if (phase == PHASE_CMDOUT) {
-#if defined(REAL_DMA)
-				void *d;
-				unsigned long count;
-
-				if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
-					count = cmd->SCp.buffer->length;
-					d = sg_virt(cmd->SCp.buffer);
-				} else {
-					count = cmd->SCp.this_residual;
-					d = cmd->SCp.ptr;
-				}
-				/* this command setup for dma yet? */
-				if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) {
-					if (cmd->request->cmd_type == REQ_TYPE_FS) {
-						sun3scsi_dma_setup(instance, d, count,
-						                   rq_data_dir(cmd->request));
-						sun3_dma_setup_done = cmd;
-					}
-				}
-#endif
-#ifdef SUN3_SCSI_VME
-				dregs->csr |= CSR_INTR;
-#endif
-			}
-#endif /* CONFIG_SUN3 */
-
-			if (sink && (phase != PHASE_MSGOUT)) {
-				NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
-
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
-				              ICR_ASSERT_ACK);
-				while (NCR5380_read(STATUS_REG) & SR_REQ)
-					;
-				NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
-				              ICR_ASSERT_ATN);
-				sink = 0;
-				continue;
-			}
-
-			switch (phase) {
-			case PHASE_DATAOUT:
-#if (NDEBUG & NDEBUG_NO_DATAOUT)
-				shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n");
-				sink = 1;
-				do_abort(instance);
-				cmd->result = DID_ERROR << 16;
-				complete_cmd(instance, cmd);
-				hostdata->connected = NULL;
-				return;
-#endif
-			case PHASE_DATAIN:
-				/*
-				 * If there is no room left in the current buffer in the
-				 * scatter-gather list, move onto the next one.
-				 */
-
-				if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
-					++cmd->SCp.buffer;
-					--cmd->SCp.buffers_residual;
-					cmd->SCp.this_residual = cmd->SCp.buffer->length;
-					cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-					merge_contiguous_buffers(cmd);
-					dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
-					         cmd->SCp.this_residual,
-					         cmd->SCp.buffers_residual);
-				}
-
-				/*
-				 * The preferred transfer method is going to be
-				 * PSEUDO-DMA for systems that are strictly PIO,
-				 * since we can let the hardware do the handshaking.
-				 *
-				 * For this to work, we need to know the transfersize
-				 * ahead of time, since the pseudo-DMA code will sit
-				 * in an unconditional loop.
-				 */
-
-				/* ++roman: I suggest, this should be
-				 * #if def(REAL_DMA)
-				 * instead of leaving REAL_DMA out.
-				 */
-
-#if defined(REAL_DMA)
-#if !defined(CONFIG_SUN3)
-				transfersize = 0;
-				if (!cmd->device->borken)
-#endif
-					transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
-
-				if (transfersize >= DMA_MIN_SIZE) {
-					len = transfersize;
-					cmd->SCp.phase = phase;
-					if (NCR5380_transfer_dma(instance, &phase,
-					    &len, (unsigned char **)&cmd->SCp.ptr)) {
-						/*
-						 * If the watchdog timer fires, all future
-						 * accesses to this device will use the
-						 * polled-IO.
-						 */
-						scmd_printk(KERN_INFO, cmd,
-							"switching to slow handshake\n");
-						cmd->device->borken = 1;
-						sink = 1;
-						do_abort(instance);
-						cmd->result = DID_ERROR << 16;
-						/* XXX - need to source or sink data here, as appropriate */
-					} else {
-#ifdef REAL_DMA
-						/* ++roman: When using real DMA,
-						 * information_transfer() should return after
-						 * starting DMA since it has nothing more to
-						 * do.
-						 */
-						return;
-#else
-						cmd->SCp.this_residual -= transfersize - len;
-#endif
-					}
-				} else
-#endif /* defined(REAL_DMA) */
-				{
-					/* Break up transfer into 3 ms chunks,
-					 * presuming 6 accesses per handshake.
-					 */
-					transfersize = min((unsigned long)cmd->SCp.this_residual,
-					                   hostdata->accesses_per_ms / 2);
-					len = transfersize;
-					NCR5380_transfer_pio(instance, &phase, &len,
-					                     (unsigned char **)&cmd->SCp.ptr);
-					cmd->SCp.this_residual -= transfersize - len;
-				}
-#if defined(CONFIG_SUN3) && defined(REAL_DMA)
-				/* if we had intended to dma that command clear it */
-				if (sun3_dma_setup_done == cmd)
-					sun3_dma_setup_done = NULL;
-#endif
-				return;
-			case PHASE_MSGIN:
-				len = 1;
-				data = &tmp;
-				NCR5380_transfer_pio(instance, &phase, &len, &data);
-				cmd->SCp.Message = tmp;
-
-				switch (tmp) {
-				case ABORT:
-				case COMMAND_COMPLETE:
-					/* Accept message by clearing ACK */
-					NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-					dsprintk(NDEBUG_QUEUES, instance,
-					         "COMMAND COMPLETE %p target %d lun %llu\n",
-					         cmd, scmd_id(cmd), cmd->device->lun);
-
-					hostdata->connected = NULL;
-#ifdef SUPPORT_TAGS
-					cmd_free_tag(cmd);
-					if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
-						u8 lun = cmd->device->lun;
-						struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
-
-						dsprintk(NDEBUG_TAGS, instance,
-						         "QUEUE_FULL %p target %d lun %d nr_allocated %d\n",
-						         cmd, scmd_id(cmd), lun, ta->nr_allocated);
-						if (ta->queue_size > ta->nr_allocated)
-							ta->queue_size = ta->nr_allocated;
-					}
-#endif
-
-					cmd->result &= ~0xffff;
-					cmd->result |= cmd->SCp.Status;
-					cmd->result |= cmd->SCp.Message << 8;
-
-					if (cmd->cmnd[0] == REQUEST_SENSE)
-						complete_cmd(instance, cmd);
-					else {
-						if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION ||
-						    cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) {
-							dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n",
-							         cmd);
-							list_add_tail(&ncmd->list,
-							              &hostdata->autosense);
-						} else
-							complete_cmd(instance, cmd);
-					}
-
-					/*
-					 * Restore phase bits to 0 so an interrupted selection,
-					 * arbitration can resume.
-					 */
-					NCR5380_write(TARGET_COMMAND_REG, 0);
-
-					/* Enable reselect interrupts */
-					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-
-					maybe_release_dma_irq(instance);
-					return;
-				case MESSAGE_REJECT:
-					/* Accept message by clearing ACK */
-					NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-					switch (hostdata->last_message) {
-					case HEAD_OF_QUEUE_TAG:
-					case ORDERED_QUEUE_TAG:
-					case SIMPLE_QUEUE_TAG:
-						/* The target obviously doesn't support tagged
-						 * queuing, even though it announced this ability in
-						 * its INQUIRY data ?!? (maybe only this LUN?) Ok,
-						 * clear 'tagged_supported' and lock the LUN, since
-						 * the command is treated as untagged further on.
-						 */
-						cmd->device->tagged_supported = 0;
-						hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
-						cmd->tag = TAG_NONE;
-						dsprintk(NDEBUG_TAGS, instance, "target %d lun %llu rejected QUEUE_TAG message; tagged queuing disabled\n",
-						         scmd_id(cmd), cmd->device->lun);
-						break;
-					}
-					break;
-				case DISCONNECT:
-					/* Accept message by clearing ACK */
-					NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-					hostdata->connected = NULL;
-					list_add(&ncmd->list, &hostdata->disconnected);
-					dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
-					         instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
-					         cmd, scmd_id(cmd), cmd->device->lun);
-
-					/*
-					 * Restore phase bits to 0 so an interrupted selection,
-					 * arbitration can resume.
-					 */
-					NCR5380_write(TARGET_COMMAND_REG, 0);
-
-					/* Enable reselect interrupts */
-					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-#ifdef SUN3_SCSI_VME
-					dregs->csr |= CSR_DMA_ENABLE;
-#endif
-					return;
-					/*
-					 * The SCSI data pointer is *IMPLICITLY* saved on a disconnect
-					 * operation, in violation of the SCSI spec so we can safely
-					 * ignore SAVE/RESTORE pointers calls.
-					 *
-					 * Unfortunately, some disks violate the SCSI spec and
-					 * don't issue the required SAVE_POINTERS message before
-					 * disconnecting, and we have to break spec to remain
-					 * compatible.
-					 */
-				case SAVE_POINTERS:
-				case RESTORE_POINTERS:
-					/* Accept message by clearing ACK */
-					NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-					break;
-				case EXTENDED_MESSAGE:
-					/*
-					 * Start the message buffer with the EXTENDED_MESSAGE
-					 * byte, since spi_print_msg() wants the whole thing.
-					 */
-					extended_msg[0] = EXTENDED_MESSAGE;
-					/* Accept first byte by clearing ACK */
-					NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-					spin_unlock_irq(&hostdata->lock);
-
-					dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n");
-
-					len = 2;
-					data = extended_msg + 1;
-					phase = PHASE_MSGIN;
-					NCR5380_transfer_pio(instance, &phase, &len, &data);
-					dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n",
-					         (int)extended_msg[1],
-					         (int)extended_msg[2]);
-
-					if (!len && extended_msg[1] > 0 &&
-					    extended_msg[1] <= sizeof(extended_msg) - 2) {
-						/* Accept third byte by clearing ACK */
-						NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-						len = extended_msg[1] - 1;
-						data = extended_msg + 3;
-						phase = PHASE_MSGIN;
-
-						NCR5380_transfer_pio(instance, &phase, &len, &data);
-						dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n",
-						         len);
-
-						switch (extended_msg[2]) {
-						case EXTENDED_SDTR:
-						case EXTENDED_WDTR:
-						case EXTENDED_MODIFY_DATA_POINTER:
-						case EXTENDED_EXTENDED_IDENTIFY:
-							tmp = 0;
-						}
-					} else if (len) {
-						shost_printk(KERN_ERR, instance, "error receiving extended message\n");
-						tmp = 0;
-					} else {
-						shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n",
-						             extended_msg[2], extended_msg[1]);
-						tmp = 0;
-					}
-
-					spin_lock_irq(&hostdata->lock);
-					if (!hostdata->connected)
-						return;
-
-					/* Fall through to reject message */
-
-					/*
-					 * If we get something weird that we aren't expecting,
-					 * reject it.
-					 */
-				default:
-					if (!tmp) {
-						shost_printk(KERN_ERR, instance, "rejecting message ");
-						spi_print_msg(extended_msg);
-						printk("\n");
-					} else if (tmp != EXTENDED_MESSAGE)
-						scmd_printk(KERN_INFO, cmd,
-						            "rejecting unknown message %02x\n",
-						            tmp);
-					else
-						scmd_printk(KERN_INFO, cmd,
-						            "rejecting unknown extended message code %02x, length %d\n",
-						            extended_msg[1], extended_msg[0]);
-
-					msgout = MESSAGE_REJECT;
-					NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-					break;
-				} /* switch (tmp) */
-				break;
-			case PHASE_MSGOUT:
-				len = 1;
-				data = &msgout;
-				hostdata->last_message = msgout;
-				NCR5380_transfer_pio(instance, &phase, &len, &data);
-				if (msgout == ABORT) {
-					hostdata->connected = NULL;
-					cmd->result = DID_ERROR << 16;
-					complete_cmd(instance, cmd);
-					maybe_release_dma_irq(instance);
-					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-					return;
-				}
-				msgout = NOP;
-				break;
-			case PHASE_CMDOUT:
-				len = cmd->cmd_len;
-				data = cmd->cmnd;
-				/*
-				 * XXX for performance reasons, on machines with a
-				 * PSEUDO-DMA architecture we should probably
-				 * use the dma transfer function.
-				 */
-				NCR5380_transfer_pio(instance, &phase, &len, &data);
-				break;
-			case PHASE_STATIN:
-				len = 1;
-				data = &tmp;
-				NCR5380_transfer_pio(instance, &phase, &len, &data);
-				cmd->SCp.Status = tmp;
-				break;
-			default:
-				shost_printk(KERN_ERR, instance, "unknown phase\n");
-				NCR5380_dprint(NDEBUG_ANY, instance);
-			} /* switch(phase) */
-		} else {
-			spin_unlock_irq(&hostdata->lock);
-			NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
-			spin_lock_irq(&hostdata->lock);
-		}
-	}
-}
-
-/*
- * Function : void NCR5380_reselect (struct Scsi_Host *instance)
- *
- * Purpose : does reselection, initializing the instance->connected
- * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
- * nexus has been reestablished,
- *
- * Inputs : instance - this instance of the NCR5380.
- */
-
-
-/* it might eventually prove necessary to do a dma setup on
-   reselection, but it doesn't seem to be needed now -- sam */
-
-static void NCR5380_reselect(struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned char target_mask;
-	unsigned char lun;
-#ifdef SUPPORT_TAGS
-	unsigned char tag;
-#endif
-	unsigned char msg[3];
-	int __maybe_unused len;
-	unsigned char __maybe_unused *data, __maybe_unused phase;
-	struct NCR5380_cmd *ncmd;
-	struct scsi_cmnd *tmp;
-
-	/*
-	 * Disable arbitration, etc. since the host adapter obviously
-	 * lost, and tell an interrupted NCR5380_select() to restart.
-	 */
-
-	NCR5380_write(MODE_REG, MR_BASE);
-
-	target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
-
-	dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
-
-	/*
-	 * At this point, we have detected that our SCSI ID is on the bus,
-	 * SEL is true and BSY was false for at least one bus settle delay
-	 * (400 ns).
-	 *
-	 * We must assert BSY ourselves, until the target drops the SEL
-	 * signal.
-	 */
-
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-	if (NCR5380_poll_politely(instance,
-	                          STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		return;
-	}
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-	/*
-	 * Wait for target to go into MSGIN.
-	 */
-
-	if (NCR5380_poll_politely(instance,
-	                          STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
-		do_abort(instance);
-		return;
-	}
-
-#if defined(CONFIG_SUN3) && defined(REAL_DMA)
-	/* acknowledge toggle to MSGIN */
-	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(PHASE_MSGIN));
-
-	/* peek at the byte without really hitting the bus */
-	msg[0] = NCR5380_read(CURRENT_SCSI_DATA_REG);
-#else
-	len = 1;
-	data = msg;
-	phase = PHASE_MSGIN;
-	NCR5380_transfer_pio(instance, &phase, &len, &data);
-
-	if (len) {
-		do_abort(instance);
-		return;
-	}
-#endif
-
-	if (!(msg[0] & 0x80)) {
-		shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
-		spi_print_msg(msg);
-		printk("\n");
-		do_abort(instance);
-		return;
-	}
-	lun = msg[0] & 0x07;
-
-#if defined(SUPPORT_TAGS) && !defined(CONFIG_SUN3)
-	/* If the phase is still MSGIN, the target wants to send some more
-	 * messages. In case it supports tagged queuing, this is probably a
-	 * SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
-	 */
-	tag = TAG_NONE;
-	if (phase == PHASE_MSGIN && (hostdata->flags & FLAG_TAGGED_QUEUING)) {
-		/* Accept previous IDENTIFY message by clearing ACK */
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		len = 2;
-		data = msg + 1;
-		if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
-		    msg[1] == SIMPLE_QUEUE_TAG)
-			tag = msg[2];
-		dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n",
-		         target_mask, lun, tag);
-	}
-#endif
-
-	/*
-	 * Find the command corresponding to the I_T_L or I_T_L_Q  nexus we
-	 * just reestablished, and remove it from the disconnected queue.
-	 */
-
-	tmp = NULL;
-	list_for_each_entry(ncmd, &hostdata->disconnected, list) {
-		struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
-
-		if (target_mask == (1 << scmd_id(cmd)) &&
-		    lun == (u8)cmd->device->lun
-#ifdef SUPPORT_TAGS
-		    && (tag == cmd->tag)
-#endif
-		    ) {
-			list_del(&ncmd->list);
-			tmp = cmd;
-			break;
-		}
-	}
-
-	if (tmp) {
-		dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
-		         "reselect: removed %p from disconnected queue\n", tmp);
-	} else {
-
-#ifdef SUPPORT_TAGS
-		shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d tag %d not in disconnected queue.\n",
-		             target_mask, lun, tag);
-#else
-		shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
-		             target_mask, lun);
-#endif
-		/*
-		 * Since we have an established nexus that we can't do anything
-		 * with, we must abort it.
-		 */
-		do_abort(instance);
-		return;
-	}
-
-#if defined(CONFIG_SUN3) && defined(REAL_DMA)
-	/* engage dma setup for the command we just saw */
-	{
-		void *d;
-		unsigned long count;
-
-		if (!tmp->SCp.this_residual && tmp->SCp.buffers_residual) {
-			count = tmp->SCp.buffer->length;
-			d = sg_virt(tmp->SCp.buffer);
-		} else {
-			count = tmp->SCp.this_residual;
-			d = tmp->SCp.ptr;
-		}
-		/* setup this command for dma if not already */
-		if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) {
-			sun3scsi_dma_setup(instance, d, count,
-			                   rq_data_dir(tmp->request));
-			sun3_dma_setup_done = tmp;
-		}
-	}
-
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
-#endif
-
-	/* Accept message by clearing ACK */
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-#if defined(SUPPORT_TAGS) && defined(CONFIG_SUN3)
-	/* If the phase is still MSGIN, the target wants to send some more
-	 * messages. In case it supports tagged queuing, this is probably a
-	 * SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
-	 */
-	tag = TAG_NONE;
-	if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
-		/* Accept previous IDENTIFY message by clearing ACK */
-		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		len = 2;
-		data = msg + 1;
-		if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
-		    msg[1] == SIMPLE_QUEUE_TAG)
-			tag = msg[2];
-		dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n"
-		         target_mask, lun, tag);
-	}
-#endif
-
-	hostdata->connected = tmp;
-	dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
-	         scmd_id(tmp), tmp->device->lun, tmp->tag);
-}
-
-
-/**
- * list_find_cmd - test for presence of a command in a linked list
- * @haystack: list of commands
- * @needle: command to search for
- */
-
-static bool list_find_cmd(struct list_head *haystack,
-                          struct scsi_cmnd *needle)
-{
-	struct NCR5380_cmd *ncmd;
-
-	list_for_each_entry(ncmd, haystack, list)
-		if (NCR5380_to_scmd(ncmd) == needle)
-			return true;
-	return false;
-}
-
-/**
- * list_remove_cmd - remove a command from linked list
- * @haystack: list of commands
- * @needle: command to remove
- */
-
-static bool list_del_cmd(struct list_head *haystack,
-                         struct scsi_cmnd *needle)
-{
-	if (list_find_cmd(haystack, needle)) {
-		struct NCR5380_cmd *ncmd = scsi_cmd_priv(needle);
-
-		list_del(&ncmd->list);
-		return true;
-	}
-	return false;
-}
-
-/**
- * NCR5380_abort - scsi host eh_abort_handler() method
- * @cmd: the command to be aborted
- *
- * Try to abort a given command by removing it from queues and/or sending
- * the target an abort message. This may not succeed in causing a target
- * to abort the command. Nonetheless, the low-level driver must forget about
- * the command because the mid-layer reclaims it and it may be re-issued.
- *
- * The normal path taken by a command is as follows. For EH we trace this
- * same path to locate and abort the command.
- *
- * unissued -> selecting -> [unissued -> selecting ->]... connected ->
- * [disconnected -> connected ->]...
- * [autosense -> connected ->] done
- *
- * If cmd was not found at all then presumably it has already been completed,
- * in which case return SUCCESS to try to avoid further EH measures.
- *
- * If the command has not completed yet, we must not fail to find it.
- * We have no option but to forget the aborted command (even if it still
- * lacks sense data). The mid-layer may re-issue a command that is in error
- * recovery (see scsi_send_eh_cmnd), but the logic and data structures in
- * this driver are such that a command can appear on one queue only.
- *
- * The lock protects driver data structures, but EH handlers also use it
- * to serialize their own execution and prevent their own re-entry.
- */
-
-static int NCR5380_abort(struct scsi_cmnd *cmd)
-{
-	struct Scsi_Host *instance = cmd->device->host;
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned long flags;
-	int result = SUCCESS;
-
-	spin_lock_irqsave(&hostdata->lock, flags);
-
-#if (NDEBUG & NDEBUG_ANY)
-	scmd_printk(KERN_INFO, cmd, __func__);
-#endif
-	NCR5380_dprint(NDEBUG_ANY, instance);
-	NCR5380_dprint_phase(NDEBUG_ANY, instance);
-
-	if (list_del_cmd(&hostdata->unissued, cmd)) {
-		dsprintk(NDEBUG_ABORT, instance,
-		         "abort: removed %p from issue queue\n", cmd);
-		cmd->result = DID_ABORT << 16;
-		cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
-		goto out;
-	}
-
-	if (hostdata->selecting == cmd) {
-		dsprintk(NDEBUG_ABORT, instance,
-		         "abort: cmd %p == selecting\n", cmd);
-		hostdata->selecting = NULL;
-		cmd->result = DID_ABORT << 16;
-		complete_cmd(instance, cmd);
-		goto out;
-	}
-
-	if (list_del_cmd(&hostdata->disconnected, cmd)) {
-		dsprintk(NDEBUG_ABORT, instance,
-		         "abort: removed %p from disconnected list\n", cmd);
-		/* Can't call NCR5380_select() and send ABORT because that
-		 * means releasing the lock. Need a bus reset.
-		 */
-		set_host_byte(cmd, DID_ERROR);
-		complete_cmd(instance, cmd);
-		result = FAILED;
-		goto out;
-	}
-
-	if (hostdata->connected == cmd) {
-		dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
-		hostdata->connected = NULL;
-#ifdef REAL_DMA
-		hostdata->dma_len = 0;
-#endif
-		if (do_abort(instance)) {
-			set_host_byte(cmd, DID_ERROR);
-			complete_cmd(instance, cmd);
-			result = FAILED;
-			goto out;
-		}
-		set_host_byte(cmd, DID_ABORT);
-		complete_cmd(instance, cmd);
-		goto out;
-	}
-
-	if (list_del_cmd(&hostdata->autosense, cmd)) {
-		dsprintk(NDEBUG_ABORT, instance,
-		         "abort: removed %p from sense queue\n", cmd);
-		set_host_byte(cmd, DID_ERROR);
-		complete_cmd(instance, cmd);
-	}
-
-out:
-	if (result == FAILED)
-		dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
-	else
-		dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
-
-	queue_work(hostdata->work_q, &hostdata->main_task);
-	maybe_release_dma_irq(instance);
-	spin_unlock_irqrestore(&hostdata->lock, flags);
-
-	return result;
-}
-
-
-/**
- * NCR5380_bus_reset - reset the SCSI bus
- * @cmd: SCSI command undergoing EH
- *
- * Returns SUCCESS
- */
-
-static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
-{
-	struct Scsi_Host *instance = cmd->device->host;
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	int i;
-	unsigned long flags;
-	struct NCR5380_cmd *ncmd;
-
-	spin_lock_irqsave(&hostdata->lock, flags);
-
-#if (NDEBUG & NDEBUG_ANY)
-	scmd_printk(KERN_INFO, cmd, __func__);
-#endif
-	NCR5380_dprint(NDEBUG_ANY, instance);
-	NCR5380_dprint_phase(NDEBUG_ANY, instance);
-
-	do_reset(instance);
-
-	/* reset NCR registers */
-	NCR5380_write(MODE_REG, MR_BASE);
-	NCR5380_write(TARGET_COMMAND_REG, 0);
-	NCR5380_write(SELECT_ENABLE_REG, 0);
-
-	/* After the reset, there are no more connected or disconnected commands
-	 * and no busy units; so clear the low-level status here to avoid
-	 * conflicts when the mid-level code tries to wake up the affected
-	 * commands!
-	 */
-
-	if (list_del_cmd(&hostdata->unissued, cmd)) {
-		cmd->result = DID_RESET << 16;
-		cmd->scsi_done(cmd);
-	}
-
-	if (hostdata->selecting) {
-		hostdata->selecting->result = DID_RESET << 16;
-		complete_cmd(instance, hostdata->selecting);
-		hostdata->selecting = NULL;
-	}
-
-	list_for_each_entry(ncmd, &hostdata->disconnected, list) {
-		struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
-
-		set_host_byte(cmd, DID_RESET);
-		cmd->scsi_done(cmd);
-	}
-	INIT_LIST_HEAD(&hostdata->disconnected);
-
-	list_for_each_entry(ncmd, &hostdata->autosense, list) {
-		struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
-
-		set_host_byte(cmd, DID_RESET);
-		cmd->scsi_done(cmd);
-	}
-	INIT_LIST_HEAD(&hostdata->autosense);
-
-	if (hostdata->connected) {
-		set_host_byte(hostdata->connected, DID_RESET);
-		complete_cmd(instance, hostdata->connected);
-		hostdata->connected = NULL;
-	}
-
-#ifdef SUPPORT_TAGS
-	free_all_tags(hostdata);
-#endif
-	for (i = 0; i < 8; ++i)
-		hostdata->busy[i] = 0;
-#ifdef REAL_DMA
-	hostdata->dma_len = 0;
-#endif
-
-	queue_work(hostdata->work_q, &hostdata->main_task);
-	maybe_release_dma_irq(instance);
-	spin_unlock_irqrestore(&hostdata->lock, flags);
-
-	return SUCCESS;
-}
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 78d1b2963f2c..a59ad94ea52b 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -14,55 +14,23 @@
  *
  */
 
-
-/**************************************************************************/
-/*                                                                        */
-/* Notes for Falcon SCSI:                                                 */
-/* ----------------------                                                 */
-/*                                                                        */
-/* Since the Falcon SCSI uses the ST-DMA chip, that is shared among       */
-/* several device drivers, locking and unlocking the access to this       */
-/* chip is required. But locking is not possible from an interrupt,       */
-/* since it puts the process to sleep if the lock is not available.       */
-/* This prevents "late" locking of the DMA chip, i.e. locking it just     */
-/* before using it, since in case of disconnection-reconnection           */
-/* commands, the DMA is started from the reselection interrupt.           */
-/*                                                                        */
-/* Two possible schemes for ST-DMA-locking would be:                      */
-/*  1) The lock is taken for each command separately and disconnecting    */
-/*     is forbidden (i.e. can_queue = 1).                                 */
-/*  2) The DMA chip is locked when the first command comes in and         */
-/*     released when the last command is finished and all queues are      */
-/*     empty.                                                             */
-/* The first alternative would result in bad performance, since the       */
-/* interleaving of commands would not be used. The second is unfair to    */
-/* other drivers using the ST-DMA, because the queues will seldom be      */
-/* totally empty if there is a lot of disk traffic.                       */
-/*                                                                        */
-/* For this reasons I decided to employ a more elaborate scheme:          */
-/*  - First, we give up the lock every time we can (for fairness), this    */
-/*    means every time a command finishes and there are no other commands */
-/*    on the disconnected queue.                                          */
-/*  - If there are others waiting to lock the DMA chip, we stop           */
-/*    issuing commands, i.e. moving them onto the issue queue.           */
-/*    Because of that, the disconnected queue will run empty in a         */
-/*    while. Instead we go to sleep on a 'fairness_queue'.                */
-/*  - If the lock is released, all processes waiting on the fairness      */
-/*    queue will be woken. The first of them tries to re-lock the DMA,     */
-/*    the others wait for the first to finish this task. After that,      */
-/*    they can all run on and do their commands...                        */
-/* This sounds complicated (and it is it :-(), but it seems to be a       */
-/* good compromise between fairness and performance: As long as no one     */
-/* else wants to work with the ST-DMA chip, SCSI can go along as          */
-/* usual. If now someone else comes, this behaviour is changed to a       */
-/* "fairness mode": just already initiated commands are finished and      */
-/* then the lock is released. The other one waiting will probably win     */
-/* the race for locking the DMA, since it was waiting for longer. And     */
-/* after it has finished, SCSI can go ahead again. Finally: I hope I      */
-/* have not produced any deadlock possibilities!                          */
-/*                                                                        */
-/**************************************************************************/
-
+/*
+ * Notes for Falcon SCSI DMA
+ *
+ * The 5380 device is one of several that all share the DMA chip. Hence
+ * "locking" and "unlocking" access to this chip is required.
+ *
+ * Two possible schemes for ST DMA acquisition by atari_scsi are:
+ * 1) The lock is taken for each command separately (i.e. can_queue == 1).
+ * 2) The lock is taken when the first command arrives and released
+ * when the last command is finished (i.e. can_queue > 1).
+ *
+ * The first alternative limits SCSI bus utilization, since interleaving
+ * commands is not possible. The second gives better performance but is
+ * unfair to other drivers needing to use the ST DMA chip. In order to
+ * allow the IDE and floppy drivers equal access to the ST DMA chip
+ * the default is can_queue == 1.
+ */
 
 #include <linux/module.h>
 #include <linux/types.h>
@@ -83,13 +51,10 @@
 
 #include <scsi/scsi_host.h>
 
-/* Definitions for the core NCR5380 driver. */
-
-#define REAL_DMA
-#define SUPPORT_TAGS
-#define MAX_TAGS                        32
 #define DMA_MIN_SIZE                    32
 
+/* Definitions for the core NCR5380 driver. */
+
 #define NCR5380_implementation_fields   /* none */
 
 #define NCR5380_read(reg)               atari_scsi_reg_read(reg)
@@ -99,9 +64,9 @@
 #define NCR5380_abort                   atari_scsi_abort
 #define NCR5380_info                    atari_scsi_info
 
-#define NCR5380_dma_read_setup(instance, data, count) \
+#define NCR5380_dma_recv_setup(instance, data, count) \
         atari_scsi_dma_setup(instance, data, count, 0)
-#define NCR5380_dma_write_setup(instance, data, count) \
+#define NCR5380_dma_send_setup(instance, data, count) \
         atari_scsi_dma_setup(instance, data, count, 1)
 #define NCR5380_dma_residual(instance) \
         atari_scsi_dma_residual(instance)
@@ -159,14 +124,11 @@ static inline unsigned long SCSI_DMA_GETADR(void)
 	return adr;
 }
 
-#ifdef REAL_DMA
 static void atari_scsi_fetch_restbytes(void);
-#endif
 
 static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
 static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
 
-#ifdef REAL_DMA
 static unsigned long	atari_dma_residual, atari_dma_startaddr;
 static short		atari_dma_active;
 /* pointer to the dribble buffer */
@@ -185,7 +147,6 @@ static char		*atari_dma_orig_addr;
 /* mask for address bits that can't be used with the ST-DMA */
 static unsigned long	atari_dma_stram_mask;
 #define STRAM_ADDR(a)	(((a) & atari_dma_stram_mask) == 0)
-#endif
 
 static int setup_can_queue = -1;
 module_param(setup_can_queue, int, 0);
@@ -193,16 +154,12 @@ static int setup_cmd_per_lun = -1;
 module_param(setup_cmd_per_lun, int, 0);
 static int setup_sg_tablesize = -1;
 module_param(setup_sg_tablesize, int, 0);
-static int setup_use_tagged_queuing = -1;
-module_param(setup_use_tagged_queuing, int, 0);
 static int setup_hostid = -1;
 module_param(setup_hostid, int, 0);
 static int setup_toshiba_delay = -1;
 module_param(setup_toshiba_delay, int, 0);
 
 
-#if defined(REAL_DMA)
-
 static int scsi_dma_is_ignored_buserr(unsigned char dma_stat)
 {
 	int i;
@@ -255,12 +212,9 @@ static void scsi_dma_buserr(int irq, void *dummy)
 }
 #endif
 
-#endif
-
 
 static irqreturn_t scsi_tt_intr(int irq, void *dev)
 {
-#ifdef REAL_DMA
 	struct Scsi_Host *instance = dev;
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
@@ -342,8 +296,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev)
 		tt_scsi_dma.dma_ctrl = 0;
 	}
 
-#endif /* REAL_DMA */
-
 	NCR5380_intr(irq, dev);
 
 	return IRQ_HANDLED;
@@ -352,7 +304,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev)
 
 static irqreturn_t scsi_falcon_intr(int irq, void *dev)
 {
-#ifdef REAL_DMA
 	struct Scsi_Host *instance = dev;
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
@@ -405,15 +356,12 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dev)
 		atari_dma_orig_addr = NULL;
 	}
 
-#endif /* REAL_DMA */
-
 	NCR5380_intr(irq, dev);
 
 	return IRQ_HANDLED;
 }
 
 
-#ifdef REAL_DMA
 static void atari_scsi_fetch_restbytes(void)
 {
 	int nr;
@@ -436,7 +384,6 @@ static void atari_scsi_fetch_restbytes(void)
 			*dst++ = *src++;
 	}
 }
-#endif /* REAL_DMA */
 
 
 /* This function releases the lock on the DMA chip if there is no
@@ -464,6 +411,10 @@ static int falcon_get_lock(struct Scsi_Host *instance)
 	if (IS_A_TT())
 		return 1;
 
+	if (stdma_is_locked_by(scsi_falcon_intr) &&
+	    instance->hostt->can_queue > 1)
+		return 1;
+
 	if (in_interrupt())
 		return stdma_try_lock(scsi_falcon_intr, instance);
 
@@ -495,8 +446,7 @@ static int __init atari_scsi_setup(char *str)
 		setup_sg_tablesize = ints[3];
 	if (ints[0] >= 4)
 		setup_hostid = ints[4];
-	if (ints[0] >= 5)
-		setup_use_tagged_queuing = ints[5];
+	/* ints[5] (use_tagged_queuing) is ignored */
 	/* ints[6] (use_pdma) is ignored */
 	if (ints[0] >= 7)
 		setup_toshiba_delay = ints[7];
@@ -508,8 +458,6 @@ __setup("atascsi=", atari_scsi_setup);
 #endif /* !MODULE */
 
 
-#if defined(REAL_DMA)
-
 static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
 					  void *data, unsigned long count,
 					  int dir)
@@ -545,9 +493,6 @@ static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
 	 */
 	dma_cache_maintenance(addr, count, dir);
 
-	if (count == 0)
-		printk(KERN_NOTICE "SCSI warning: DMA programmed for 0 bytes !\n");
-
 	if (IS_A_TT()) {
 		tt_scsi_dma.dma_ctrl = dir;
 		SCSI_DMA_WRITE_P(dma_addr, addr);
@@ -624,6 +569,9 @@ static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
 {
 	unsigned long	possible_len, limit;
 
+	if (wanted_len < DMA_MIN_SIZE)
+		return 0;
+
 	if (IS_A_TT())
 		/* TT SCSI DMA can transfer arbitrary #bytes */
 		return wanted_len;
@@ -703,9 +651,6 @@ static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
 }
 
 
-#endif	/* REAL_DMA */
-
-
 /* NCR5380 register access functions
  *
  * There are separate functions for TT and Falcon, because the access
@@ -736,7 +681,7 @@ static void atari_scsi_falcon_reg_write(unsigned char reg, unsigned char value)
 }
 
 
-#include "atari_NCR5380.c"
+#include "NCR5380.c"
 
 static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
 {
@@ -745,7 +690,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
 
 	local_irq_save(flags);
 
-#ifdef REAL_DMA
 	/* Abort a maybe active DMA transfer */
 	if (IS_A_TT()) {
 		tt_scsi_dma.dma_ctrl = 0;
@@ -754,7 +698,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
 		atari_dma_active = 0;
 		atari_dma_orig_addr = NULL;
 	}
-#endif
 
 	rv = NCR5380_bus_reset(cmd);
 
@@ -781,6 +724,7 @@ static struct scsi_host_template atari_scsi_template = {
 	.eh_abort_handler	= atari_scsi_abort,
 	.eh_bus_reset_handler	= atari_scsi_bus_reset,
 	.this_id		= 7,
+	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.cmd_size		= NCR5380_CMD_SIZE,
 };
@@ -804,24 +748,11 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 		atari_scsi_reg_write = atari_scsi_falcon_reg_write;
 	}
 
-	/* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary.
-	 * Higher values should work, too; try it!
-	 * (But cmd_per_lun costs memory!)
-	 *
-	 * But there seems to be a bug somewhere that requires CAN_QUEUE to be
-	 * 2*CMD_PER_LUN. At least on a TT, no spurious timeouts seen since
-	 * changed CMD_PER_LUN...
-	 *
-	 * Note: The Falcon currently uses 8/1 setting due to unsolved problems
-	 * with cmd_per_lun != 1
-	 */
 	if (ATARIHW_PRESENT(TT_SCSI)) {
 		atari_scsi_template.can_queue    = 16;
-		atari_scsi_template.cmd_per_lun  = 8;
 		atari_scsi_template.sg_tablesize = SG_ALL;
 	} else {
-		atari_scsi_template.can_queue    = 8;
-		atari_scsi_template.cmd_per_lun  = 1;
+		atari_scsi_template.can_queue    = 1;
 		atari_scsi_template.sg_tablesize = SG_NONE;
 	}
 
@@ -850,8 +781,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 		}
 	}
 
-
-#ifdef REAL_DMA
 	/* If running on a Falcon and if there's TT-Ram (i.e., more than one
 	 * memory block, since there's always ST-Ram in a Falcon), then
 	 * allocate a STRAM_BUFFER_SIZE byte dribble buffer for transfers
@@ -867,7 +796,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 		atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
 		atari_dma_orig_addr = 0;
 	}
-#endif
 
 	instance = scsi_host_alloc(&atari_scsi_template,
 	                           sizeof(struct NCR5380_hostdata));
@@ -879,9 +807,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 	instance->irq = irq->start;
 
 	host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP;
-#ifdef SUPPORT_TAGS
-	host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
-#endif
 	host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
 
 	error = NCR5380_init(instance, host_flags);
@@ -897,7 +822,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 			goto fail_irq;
 		}
 		tt_mfp.active_edge |= 0x80;	/* SCSI int on L->H */
-#ifdef REAL_DMA
+
 		tt_scsi_dma.dma_ctrl = 0;
 		atari_dma_residual = 0;
 
@@ -919,17 +844,14 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 
 			hostdata->read_overruns = 4;
 		}
-#endif
 	} else {
 		/* Nothing to do for the interrupt: the ST-DMA is initialized
 		 * already.
 		 */
-#ifdef REAL_DMA
 		atari_dma_residual = 0;
 		atari_dma_active = 0;
 		atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000
 					: 0xff000000);
-#endif
 	}
 
 	NCR5380_maybe_reset_bus(instance);
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 499e369eabf0..fdd4eb4e41b2 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -65,7 +65,7 @@
 #include "bnx2fc_constants.h"
 
 #define BNX2FC_NAME		"bnx2fc"
-#define BNX2FC_VERSION		"2.9.6"
+#define BNX2FC_VERSION		"2.10.3"
 
 #define PFX			"bnx2fc: "
 
@@ -261,6 +261,7 @@ struct bnx2fc_interface {
 	u8 vlan_enabled;
 	int vlan_id;
 	bool enabled;
+	u8 tm_timeout;
 };
 
 #define bnx2fc_from_ctlr(x)			\
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index d7029ea5d319..a1881993982c 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -107,6 +107,26 @@ MODULE_PARM_DESC(debug_logging,
 		"\t\t0x10 - fcoe L2 fame related logs.\n"
 		"\t\t0xff - LOG all messages.");
 
+uint bnx2fc_devloss_tmo;
+module_param_named(devloss_tmo, bnx2fc_devloss_tmo, uint, S_IRUGO);
+MODULE_PARM_DESC(devloss_tmo, " Change devloss_tmo for the remote ports "
+	"attached via bnx2fc.");
+
+uint bnx2fc_max_luns = BNX2FC_MAX_LUN;
+module_param_named(max_luns, bnx2fc_max_luns, uint, S_IRUGO);
+MODULE_PARM_DESC(max_luns, " Change the default max_lun per SCSI host. Default "
+	"0xffff.");
+
+uint bnx2fc_queue_depth;
+module_param_named(queue_depth, bnx2fc_queue_depth, uint, S_IRUGO);
+MODULE_PARM_DESC(queue_depth, " Change the default queue depth of SCSI devices "
+	"attached via bnx2fc.");
+
+uint bnx2fc_log_fka;
+module_param_named(log_fka, bnx2fc_log_fka, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(log_fka, " Print message to kernel log when fcoe is "
+	"initiating a FIP keep alive when debug logging is enabled.");
+
 static int bnx2fc_cpu_callback(struct notifier_block *nfb,
 			     unsigned long action, void *hcpu);
 /* notification function for CPU hotplug events */
@@ -692,7 +712,7 @@ static int bnx2fc_shost_config(struct fc_lport *lport, struct device *dev)
 	int rc = 0;
 
 	shost->max_cmd_len = BNX2FC_MAX_CMD_LEN;
-	shost->max_lun = BNX2FC_MAX_LUN;
+	shost->max_lun = bnx2fc_max_luns;
 	shost->max_id = BNX2FC_MAX_FCP_TGT;
 	shost->max_channel = 0;
 	if (lport->vport)
@@ -1061,6 +1081,20 @@ static u8 *bnx2fc_get_src_mac(struct fc_lport *lport)
  */
 static void bnx2fc_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 {
+	struct fip_header *fiph;
+	struct ethhdr *eth_hdr;
+	u16 op;
+	u8 sub;
+
+	fiph = (struct fip_header *) ((void *)skb->data + 2 * ETH_ALEN + 2);
+	eth_hdr = (struct ethhdr *)skb_mac_header(skb);
+	op = ntohs(fiph->fip_op);
+	sub = fiph->fip_subcode;
+
+	if (op == FIP_OP_CTRL && sub == FIP_SC_SOL && bnx2fc_log_fka)
+		BNX2FC_MISC_DBG("Sending FKA from %pM to %pM.\n",
+		    eth_hdr->h_source, eth_hdr->h_dest);
+
 	skb->dev = bnx2fc_from_ctlr(fip)->netdev;
 	dev_queue_xmit(skb);
 }
@@ -1102,6 +1136,9 @@ static int bnx2fc_vport_create(struct fc_vport *vport, bool disabled)
 		return -EIO;
 	}
 
+	if (bnx2fc_devloss_tmo)
+		fc_host_dev_loss_tmo(vn_port->host) = bnx2fc_devloss_tmo;
+
 	if (disabled) {
 		fc_vport_set_state(vport, FC_VPORT_DISABLED);
 	} else {
@@ -1495,6 +1532,9 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
 	}
 	fc_host_port_type(lport->host) = FC_PORTTYPE_UNKNOWN;
 
+	if (bnx2fc_devloss_tmo)
+		fc_host_dev_loss_tmo(shost) = bnx2fc_devloss_tmo;
+
 	/* Allocate exchange manager */
 	if (!npiv)
 		rc = bnx2fc_em_config(lport, hba);
@@ -1999,6 +2039,8 @@ static void bnx2fc_ulp_init(struct cnic_dev *dev)
 		return;
 	}
 
+	pr_info(PFX "FCoE initialized for %s.\n", dev->netdev->name);
+
 	/* Add HBA to the adapter list */
 	mutex_lock(&bnx2fc_dev_lock);
 	list_add_tail(&hba->list, &adapter_list);
@@ -2293,6 +2335,7 @@ static int _bnx2fc_create(struct net_device *netdev,
 	ctlr = bnx2fc_to_ctlr(interface);
 	cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
 	interface->vlan_id = vlan_id;
+	interface->tm_timeout = BNX2FC_TM_TIMEOUT;
 
 	interface->timer_work_queue =
 			create_singlethread_workqueue("bnx2fc_timer_wq");
@@ -2612,6 +2655,15 @@ static int bnx2fc_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
+static int bnx2fc_slave_configure(struct scsi_device *sdev)
+{
+	if (!bnx2fc_queue_depth)
+		return 0;
+
+	scsi_change_queue_depth(sdev, bnx2fc_queue_depth);
+	return 0;
+}
+
 /**
  * bnx2fc_mod_init - module init entry point
  *
@@ -2858,6 +2910,50 @@ static struct fc_function_template bnx2fc_vport_xport_function = {
 	.bsg_request = fc_lport_bsg_request,
 };
 
+/*
+ * Additional scsi_host attributes.
+ */
+static ssize_t
+bnx2fc_tm_timeout_show(struct device *dev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct fc_lport *lport = shost_priv(shost);
+	struct fcoe_port *port = lport_priv(lport);
+	struct bnx2fc_interface *interface = port->priv;
+
+	sprintf(buf, "%u\n", interface->tm_timeout);
+	return strlen(buf);
+}
+
+static ssize_t
+bnx2fc_tm_timeout_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct fc_lport *lport = shost_priv(shost);
+	struct fcoe_port *port = lport_priv(lport);
+	struct bnx2fc_interface *interface = port->priv;
+	int rval, val;
+
+	rval = kstrtouint(buf, 10, &val);
+	if (rval)
+		return rval;
+	if (val > 255)
+		return -ERANGE;
+
+	interface->tm_timeout = (u8)val;
+	return strlen(buf);
+}
+
+static DEVICE_ATTR(tm_timeout, S_IRUGO|S_IWUSR, bnx2fc_tm_timeout_show,
+	bnx2fc_tm_timeout_store);
+
+static struct device_attribute *bnx2fc_host_attrs[] = {
+	&dev_attr_tm_timeout,
+	NULL,
+};
+
 /**
  * scsi_host_template structure used while registering with SCSI-ml
  */
@@ -2877,6 +2973,8 @@ static struct scsi_host_template bnx2fc_shost_template = {
 	.sg_tablesize		= BNX2FC_MAX_BDS_PER_CMD,
 	.max_sectors		= 1024,
 	.track_queue_depth	= 1,
+	.slave_configure	= bnx2fc_slave_configure,
+	.shost_attrs		= bnx2fc_host_attrs,
 };
 
 static struct libfc_function_template bnx2fc_libfc_fcn_templ = {
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 2230dab67ca5..026f394a3851 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -179,12 +179,24 @@ static void bnx2fc_scsi_done(struct bnx2fc_cmd *io_req, int err_code)
 
 	bnx2fc_unmap_sg_list(io_req);
 	io_req->sc_cmd = NULL;
+
+	/* Sanity checks before returning command to mid-layer */
 	if (!sc_cmd) {
 		printk(KERN_ERR PFX "scsi_done - sc_cmd NULL. "
 				    "IO(0x%x) already cleaned up\n",
 		       io_req->xid);
 		return;
 	}
+	if (!sc_cmd->device) {
+		pr_err(PFX "0x%x: sc_cmd->device is NULL.\n", io_req->xid);
+		return;
+	}
+	if (!sc_cmd->device->host) {
+		pr_err(PFX "0x%x: sc_cmd->device->host is NULL.\n",
+		    io_req->xid);
+		return;
+	}
+
 	sc_cmd->result = err_code << 16;
 
 	BNX2FC_IO_DBG(io_req, "sc=%p, result=0x%x, retries=%d, allowed=%d\n",
@@ -770,7 +782,7 @@ retry_tmf:
 	spin_unlock_bh(&tgt->tgt_lock);
 
 	rc = wait_for_completion_timeout(&io_req->tm_done,
-					 BNX2FC_TM_TIMEOUT * HZ);
+					 interface->tm_timeout * HZ);
 	spin_lock_bh(&tgt->tgt_lock);
 
 	io_req->wait_for_comp = 0;
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 72894378ffcf..133901fd3e35 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -675,7 +675,7 @@ bnx2i_find_ep_in_ofld_list(struct bnx2i_hba *hba, u32 iscsi_cid)
 {
 	struct list_head *list;
 	struct list_head *tmp;
-	struct bnx2i_endpoint *ep;
+	struct bnx2i_endpoint *ep = NULL;
 
 	read_lock_bh(&hba->ep_rdwr_lock);
 	list_for_each_safe(list, tmp, &hba->ep_ofld_list) {
@@ -703,7 +703,7 @@ bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid)
 {
 	struct list_head *list;
 	struct list_head *tmp;
-	struct bnx2i_endpoint *ep;
+	struct bnx2i_endpoint *ep = NULL;
 
 	read_lock_bh(&hba->ep_rdwr_lock);
 	list_for_each_safe(list, tmp, &hba->ep_destroy_list) {
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index fa09d4be2b53..83458f7a2824 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -292,850 +292,30 @@ bool scsi_opcode_sa_name(int opcode, int service_action,
 
 struct error_info {
 	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
-	const char * text;
+	unsigned short size;
 };
 
 /*
- * The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
+ * There are 700+ entries in this table. To save space, we don't store
+ * (code, pointer) pairs, which would make sizeof(struct
+ * error_info)==16 on 64 bits. Rather, the second element just stores
+ * the size (including \0) of the corresponding string, and we use the
+ * sum of these to get the appropriate offset into additional_text
+ * defined below. This approach saves 12 bytes per entry.
  */
-
 static const struct error_info additional[] =
 {
-	{0x0000, "No additional sense information"},
-	{0x0001, "Filemark detected"},
-	{0x0002, "End-of-partition/medium detected"},
-	{0x0003, "Setmark detected"},
-	{0x0004, "Beginning-of-partition/medium detected"},
-	{0x0005, "End-of-data detected"},
-	{0x0006, "I/O process terminated"},
-	{0x0007, "Programmable early warning detected"},
-	{0x0011, "Audio play operation in progress"},
-	{0x0012, "Audio play operation paused"},
-	{0x0013, "Audio play operation successfully completed"},
-	{0x0014, "Audio play operation stopped due to error"},
-	{0x0015, "No current audio status to return"},
-	{0x0016, "Operation in progress"},
-	{0x0017, "Cleaning requested"},
-	{0x0018, "Erase operation in progress"},
-	{0x0019, "Locate operation in progress"},
-	{0x001A, "Rewind operation in progress"},
-	{0x001B, "Set capacity operation in progress"},
-	{0x001C, "Verify operation in progress"},
-	{0x001D, "ATA pass through information available"},
-	{0x001E, "Conflicting SA creation request"},
-	{0x001F, "Logical unit transitioning to another power condition"},
-	{0x0020, "Extended copy information available"},
-	{0x0021, "Atomic command aborted due to ACA"},
-
-	{0x0100, "No index/sector signal"},
-
-	{0x0200, "No seek complete"},
-
-	{0x0300, "Peripheral device write fault"},
-	{0x0301, "No write current"},
-	{0x0302, "Excessive write errors"},
-
-	{0x0400, "Logical unit not ready, cause not reportable"},
-	{0x0401, "Logical unit is in process of becoming ready"},
-	{0x0402, "Logical unit not ready, initializing command required"},
-	{0x0403, "Logical unit not ready, manual intervention required"},
-	{0x0404, "Logical unit not ready, format in progress"},
-	{0x0405, "Logical unit not ready, rebuild in progress"},
-	{0x0406, "Logical unit not ready, recalculation in progress"},
-	{0x0407, "Logical unit not ready, operation in progress"},
-	{0x0408, "Logical unit not ready, long write in progress"},
-	{0x0409, "Logical unit not ready, self-test in progress"},
-	{0x040A, "Logical unit not accessible, asymmetric access state "
-	 "transition"},
-	{0x040B, "Logical unit not accessible, target port in standby state"},
-	{0x040C, "Logical unit not accessible, target port in unavailable "
-	 "state"},
-	{0x040D, "Logical unit not ready, structure check required"},
-	{0x040E, "Logical unit not ready, security session in progress"},
-	{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
-	{0x0411, "Logical unit not ready, notify (enable spinup) required"},
-	{0x0412, "Logical unit not ready, offline"},
-	{0x0413, "Logical unit not ready, SA creation in progress"},
-	{0x0414, "Logical unit not ready, space allocation in progress"},
-	{0x0415, "Logical unit not ready, robotics disabled"},
-	{0x0416, "Logical unit not ready, configuration required"},
-	{0x0417, "Logical unit not ready, calibration required"},
-	{0x0418, "Logical unit not ready, a door is open"},
-	{0x0419, "Logical unit not ready, operating in sequential mode"},
-	{0x041A, "Logical unit not ready, start stop unit command in "
-	 "progress"},
-	{0x041B, "Logical unit not ready, sanitize in progress"},
-	{0x041C, "Logical unit not ready, additional power use not yet "
-	 "granted"},
-	{0x041D, "Logical unit not ready, configuration in progress"},
-	{0x041E, "Logical unit not ready, microcode activation required"},
-	{0x041F, "Logical unit not ready, microcode download required"},
-	{0x0420, "Logical unit not ready, logical unit reset required"},
-	{0x0421, "Logical unit not ready, hard reset required"},
-	{0x0422, "Logical unit not ready, power cycle required"},
-
-	{0x0500, "Logical unit does not respond to selection"},
-
-	{0x0600, "No reference position found"},
-
-	{0x0700, "Multiple peripheral devices selected"},
-
-	{0x0800, "Logical unit communication failure"},
-	{0x0801, "Logical unit communication time-out"},
-	{0x0802, "Logical unit communication parity error"},
-	{0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
-	{0x0804, "Unreachable copy target"},
-
-	{0x0900, "Track following error"},
-	{0x0901, "Tracking servo failure"},
-	{0x0902, "Focus servo failure"},
-	{0x0903, "Spindle servo failure"},
-	{0x0904, "Head select fault"},
-	{0x0905, "Vibration induced tracking error"},
-
-	{0x0A00, "Error log overflow"},
-
-	{0x0B00, "Warning"},
-	{0x0B01, "Warning - specified temperature exceeded"},
-	{0x0B02, "Warning - enclosure degraded"},
-	{0x0B03, "Warning - background self-test failed"},
-	{0x0B04, "Warning - background pre-scan detected medium error"},
-	{0x0B05, "Warning - background medium scan detected medium error"},
-	{0x0B06, "Warning - non-volatile cache now volatile"},
-	{0x0B07, "Warning - degraded power to non-volatile cache"},
-	{0x0B08, "Warning - power loss expected"},
-	{0x0B09, "Warning - device statistics notification active"},
-
-	{0x0C00, "Write error"},
-	{0x0C01, "Write error - recovered with auto reallocation"},
-	{0x0C02, "Write error - auto reallocation failed"},
-	{0x0C03, "Write error - recommend reassignment"},
-	{0x0C04, "Compression check miscompare error"},
-	{0x0C05, "Data expansion occurred during compression"},
-	{0x0C06, "Block not compressible"},
-	{0x0C07, "Write error - recovery needed"},
-	{0x0C08, "Write error - recovery failed"},
-	{0x0C09, "Write error - loss of streaming"},
-	{0x0C0A, "Write error - padding blocks added"},
-	{0x0C0B, "Auxiliary memory write error"},
-	{0x0C0C, "Write error - unexpected unsolicited data"},
-	{0x0C0D, "Write error - not enough unsolicited data"},
-	{0x0C0E, "Multiple write errors"},
-	{0x0C0F, "Defects in error window"},
-	{0x0C10, "Incomplete multiple atomic write operations"},
-
-	{0x0D00, "Error detected by third party temporary initiator"},
-	{0x0D01, "Third party device failure"},
-	{0x0D02, "Copy target device not reachable"},
-	{0x0D03, "Incorrect copy target device type"},
-	{0x0D04, "Copy target device data underrun"},
-	{0x0D05, "Copy target device data overrun"},
-
-	{0x0E00, "Invalid information unit"},
-	{0x0E01, "Information unit too short"},
-	{0x0E02, "Information unit too long"},
-	{0x0E03, "Invalid field in command information unit"},
-
-	{0x1000, "Id CRC or ECC error"},
-	{0x1001, "Logical block guard check failed"},
-	{0x1002, "Logical block application tag check failed"},
-	{0x1003, "Logical block reference tag check failed"},
-	{0x1004, "Logical block protection error on recover buffered data"},
-	{0x1005, "Logical block protection method error"},
-
-	{0x1100, "Unrecovered read error"},
-	{0x1101, "Read retries exhausted"},
-	{0x1102, "Error too long to correct"},
-	{0x1103, "Multiple read errors"},
-	{0x1104, "Unrecovered read error - auto reallocate failed"},
-	{0x1105, "L-EC uncorrectable error"},
-	{0x1106, "CIRC unrecovered error"},
-	{0x1107, "Data re-synchronization error"},
-	{0x1108, "Incomplete block read"},
-	{0x1109, "No gap found"},
-	{0x110A, "Miscorrected error"},
-	{0x110B, "Unrecovered read error - recommend reassignment"},
-	{0x110C, "Unrecovered read error - recommend rewrite the data"},
-	{0x110D, "De-compression CRC error"},
-	{0x110E, "Cannot decompress using declared algorithm"},
-	{0x110F, "Error reading UPC/EAN number"},
-	{0x1110, "Error reading ISRC number"},
-	{0x1111, "Read error - loss of streaming"},
-	{0x1112, "Auxiliary memory read error"},
-	{0x1113, "Read error - failed retransmission request"},
-	{0x1114, "Read error - lba marked bad by application client"},
-	{0x1115, "Write after sanitize required"},
-
-	{0x1200, "Address mark not found for id field"},
-
-	{0x1300, "Address mark not found for data field"},
-
-	{0x1400, "Recorded entity not found"},
-	{0x1401, "Record not found"},
-	{0x1402, "Filemark or setmark not found"},
-	{0x1403, "End-of-data not found"},
-	{0x1404, "Block sequence error"},
-	{0x1405, "Record not found - recommend reassignment"},
-	{0x1406, "Record not found - data auto-reallocated"},
-	{0x1407, "Locate operation failure"},
-
-	{0x1500, "Random positioning error"},
-	{0x1501, "Mechanical positioning error"},
-	{0x1502, "Positioning error detected by read of medium"},
-
-	{0x1600, "Data synchronization mark error"},
-	{0x1601, "Data sync error - data rewritten"},
-	{0x1602, "Data sync error - recommend rewrite"},
-	{0x1603, "Data sync error - data auto-reallocated"},
-	{0x1604, "Data sync error - recommend reassignment"},
-
-	{0x1700, "Recovered data with no error correction applied"},
-	{0x1701, "Recovered data with retries"},
-	{0x1702, "Recovered data with positive head offset"},
-	{0x1703, "Recovered data with negative head offset"},
-	{0x1704, "Recovered data with retries and/or circ applied"},
-	{0x1705, "Recovered data using previous sector id"},
-	{0x1706, "Recovered data without ECC - data auto-reallocated"},
-	{0x1707, "Recovered data without ECC - recommend reassignment"},
-	{0x1708, "Recovered data without ECC - recommend rewrite"},
-	{0x1709, "Recovered data without ECC - data rewritten"},
-
-	{0x1800, "Recovered data with error correction applied"},
-	{0x1801, "Recovered data with error corr. & retries applied"},
-	{0x1802, "Recovered data - data auto-reallocated"},
-	{0x1803, "Recovered data with CIRC"},
-	{0x1804, "Recovered data with L-EC"},
-	{0x1805, "Recovered data - recommend reassignment"},
-	{0x1806, "Recovered data - recommend rewrite"},
-	{0x1807, "Recovered data with ECC - data rewritten"},
-	{0x1808, "Recovered data with linking"},
-
-	{0x1900, "Defect list error"},
-	{0x1901, "Defect list not available"},
-	{0x1902, "Defect list error in primary list"},
-	{0x1903, "Defect list error in grown list"},
-
-	{0x1A00, "Parameter list length error"},
-
-	{0x1B00, "Synchronous data transfer error"},
-
-	{0x1C00, "Defect list not found"},
-	{0x1C01, "Primary defect list not found"},
-	{0x1C02, "Grown defect list not found"},
-
-	{0x1D00, "Miscompare during verify operation"},
-	{0x1D01, "Miscompare verify of unmapped LBA"},
-
-	{0x1E00, "Recovered id with ECC correction"},
-
-	{0x1F00, "Partial defect list transfer"},
-
-	{0x2000, "Invalid command operation code"},
-	{0x2001, "Access denied - initiator pending-enrolled"},
-	{0x2002, "Access denied - no access rights"},
-	{0x2003, "Access denied - invalid mgmt id key"},
-	{0x2004, "Illegal command while in write capable state"},
-	{0x2005, "Obsolete"},
-	{0x2006, "Illegal command while in explicit address mode"},
-	{0x2007, "Illegal command while in implicit address mode"},
-	{0x2008, "Access denied - enrollment conflict"},
-	{0x2009, "Access denied - invalid LU identifier"},
-	{0x200A, "Access denied - invalid proxy token"},
-	{0x200B, "Access denied - ACL LUN conflict"},
-	{0x200C, "Illegal command when not in append-only mode"},
-
-	{0x2100, "Logical block address out of range"},
-	{0x2101, "Invalid element address"},
-	{0x2102, "Invalid address for write"},
-	{0x2103, "Invalid write crossing layer jump"},
-	{0x2104, "Unaligned write command"},
-	{0x2105, "Write boundary violation"},
-	{0x2106, "Attempt to read invalid data"},
-	{0x2107, "Read boundary violation"},
-
-	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
-
-	{0x2300, "Invalid token operation, cause not reportable"},
-	{0x2301, "Invalid token operation, unsupported token type"},
-	{0x2302, "Invalid token operation, remote token usage not supported"},
-	{0x2303, "Invalid token operation, remote rod token creation not "
-	 "supported"},
-	{0x2304, "Invalid token operation, token unknown"},
-	{0x2305, "Invalid token operation, token corrupt"},
-	{0x2306, "Invalid token operation, token revoked"},
-	{0x2307, "Invalid token operation, token expired"},
-	{0x2308, "Invalid token operation, token cancelled"},
-	{0x2309, "Invalid token operation, token deleted"},
-	{0x230A, "Invalid token operation, invalid token length"},
-
-	{0x2400, "Invalid field in cdb"},
-	{0x2401, "CDB decryption error"},
-	{0x2402, "Obsolete"},
-	{0x2403, "Obsolete"},
-	{0x2404, "Security audit value frozen"},
-	{0x2405, "Security working key frozen"},
-	{0x2406, "Nonce not unique"},
-	{0x2407, "Nonce timestamp out of range"},
-	{0x2408, "Invalid XCDB"},
-
-	{0x2500, "Logical unit not supported"},
-
-	{0x2600, "Invalid field in parameter list"},
-	{0x2601, "Parameter not supported"},
-	{0x2602, "Parameter value invalid"},
-	{0x2603, "Threshold parameters not supported"},
-	{0x2604, "Invalid release of persistent reservation"},
-	{0x2605, "Data decryption error"},
-	{0x2606, "Too many target descriptors"},
-	{0x2607, "Unsupported target descriptor type code"},
-	{0x2608, "Too many segment descriptors"},
-	{0x2609, "Unsupported segment descriptor type code"},
-	{0x260A, "Unexpected inexact segment"},
-	{0x260B, "Inline data length exceeded"},
-	{0x260C, "Invalid operation for copy source or destination"},
-	{0x260D, "Copy segment granularity violation"},
-	{0x260E, "Invalid parameter while port is enabled"},
-	{0x260F, "Invalid data-out buffer integrity check value"},
-	{0x2610, "Data decryption key fail limit reached"},
-	{0x2611, "Incomplete key-associated data set"},
-	{0x2612, "Vendor specific key reference not found"},
-
-	{0x2700, "Write protected"},
-	{0x2701, "Hardware write protected"},
-	{0x2702, "Logical unit software write protected"},
-	{0x2703, "Associated write protect"},
-	{0x2704, "Persistent write protect"},
-	{0x2705, "Permanent write protect"},
-	{0x2706, "Conditional write protect"},
-	{0x2707, "Space allocation failed write protect"},
-	{0x2708, "Zone is read only"},
-
-	{0x2800, "Not ready to ready change, medium may have changed"},
-	{0x2801, "Import or export element accessed"},
-	{0x2802, "Format-layer may have changed"},
-	{0x2803, "Import/export element accessed, medium changed"},
-
-	{0x2900, "Power on, reset, or bus device reset occurred"},
-	{0x2901, "Power on occurred"},
-	{0x2902, "Scsi bus reset occurred"},
-	{0x2903, "Bus device reset function occurred"},
-	{0x2904, "Device internal reset"},
-	{0x2905, "Transceiver mode changed to single-ended"},
-	{0x2906, "Transceiver mode changed to lvd"},
-	{0x2907, "I_T nexus loss occurred"},
-
-	{0x2A00, "Parameters changed"},
-	{0x2A01, "Mode parameters changed"},
-	{0x2A02, "Log parameters changed"},
-	{0x2A03, "Reservations preempted"},
-	{0x2A04, "Reservations released"},
-	{0x2A05, "Registrations preempted"},
-	{0x2A06, "Asymmetric access state changed"},
-	{0x2A07, "Implicit asymmetric access state transition failed"},
-	{0x2A08, "Priority changed"},
-	{0x2A09, "Capacity data has changed"},
-	{0x2A0A, "Error history I_T nexus cleared"},
-	{0x2A0B, "Error history snapshot released"},
-	{0x2A0C, "Error recovery attributes have changed"},
-	{0x2A0D, "Data encryption capabilities changed"},
-	{0x2A10, "Timestamp changed"},
-	{0x2A11, "Data encryption parameters changed by another i_t nexus"},
-	{0x2A12, "Data encryption parameters changed by vendor specific "
-		 "event"},
-	{0x2A13, "Data encryption key instance counter has changed"},
-	{0x2A14, "SA creation capabilities data has changed"},
-	{0x2A15, "Medium removal prevention preempted"},
-
-	{0x2B00, "Copy cannot execute since host cannot disconnect"},
-
-	{0x2C00, "Command sequence error"},
-	{0x2C01, "Too many windows specified"},
-	{0x2C02, "Invalid combination of windows specified"},
-	{0x2C03, "Current program area is not empty"},
-	{0x2C04, "Current program area is empty"},
-	{0x2C05, "Illegal power condition request"},
-	{0x2C06, "Persistent prevent conflict"},
-	{0x2C07, "Previous busy status"},
-	{0x2C08, "Previous task set full status"},
-	{0x2C09, "Previous reservation conflict status"},
-	{0x2C0A, "Partition or collection contains user objects"},
-	{0x2C0B, "Not reserved"},
-	{0x2C0C, "Orwrite generation does not match"},
-	{0x2C0D, "Reset write pointer not allowed"},
-	{0x2C0E, "Zone is offline"},
-
-	{0x2D00, "Overwrite error on update in place"},
-
-	{0x2E00, "Insufficient time for operation"},
-	{0x2E01, "Command timeout before processing"},
-	{0x2E02, "Command timeout during processing"},
-	{0x2E03, "Command timeout during processing due to error recovery"},
-
-	{0x2F00, "Commands cleared by another initiator"},
-	{0x2F01, "Commands cleared by power loss notification"},
-	{0x2F02, "Commands cleared by device server"},
-	{0x2F03, "Some commands cleared by queuing layer event"},
-
-	{0x3000, "Incompatible medium installed"},
-	{0x3001, "Cannot read medium - unknown format"},
-	{0x3002, "Cannot read medium - incompatible format"},
-	{0x3003, "Cleaning cartridge installed"},
-	{0x3004, "Cannot write medium - unknown format"},
-	{0x3005, "Cannot write medium - incompatible format"},
-	{0x3006, "Cannot format medium - incompatible medium"},
-	{0x3007, "Cleaning failure"},
-	{0x3008, "Cannot write - application code mismatch"},
-	{0x3009, "Current session not fixated for append"},
-	{0x300A, "Cleaning request rejected"},
-	{0x300C, "WORM medium - overwrite attempted"},
-	{0x300D, "WORM medium - integrity check"},
-	{0x3010, "Medium not formatted"},
-	{0x3011, "Incompatible volume type"},
-	{0x3012, "Incompatible volume qualifier"},
-	{0x3013, "Cleaning volume expired"},
-
-	{0x3100, "Medium format corrupted"},
-	{0x3101, "Format command failed"},
-	{0x3102, "Zoned formatting failed due to spare linking"},
-	{0x3103, "Sanitize command failed"},
-
-	{0x3200, "No defect spare location available"},
-	{0x3201, "Defect list update failure"},
-
-	{0x3300, "Tape length error"},
-
-	{0x3400, "Enclosure failure"},
-
-	{0x3500, "Enclosure services failure"},
-	{0x3501, "Unsupported enclosure function"},
-	{0x3502, "Enclosure services unavailable"},
-	{0x3503, "Enclosure services transfer failure"},
-	{0x3504, "Enclosure services transfer refused"},
-	{0x3505, "Enclosure services checksum error"},
-
-	{0x3600, "Ribbon, ink, or toner failure"},
-
-	{0x3700, "Rounded parameter"},
-
-	{0x3800, "Event status notification"},
-	{0x3802, "Esn - power management class event"},
-	{0x3804, "Esn - media class event"},
-	{0x3806, "Esn - device busy class event"},
-	{0x3807, "Thin Provisioning soft threshold reached"},
-
-	{0x3900, "Saving parameters not supported"},
-
-	{0x3A00, "Medium not present"},
-	{0x3A01, "Medium not present - tray closed"},
-	{0x3A02, "Medium not present - tray open"},
-	{0x3A03, "Medium not present - loadable"},
-	{0x3A04, "Medium not present - medium auxiliary memory accessible"},
-
-	{0x3B00, "Sequential positioning error"},
-	{0x3B01, "Tape position error at beginning-of-medium"},
-	{0x3B02, "Tape position error at end-of-medium"},
-	{0x3B03, "Tape or electronic vertical forms unit not ready"},
-	{0x3B04, "Slew failure"},
-	{0x3B05, "Paper jam"},
-	{0x3B06, "Failed to sense top-of-form"},
-	{0x3B07, "Failed to sense bottom-of-form"},
-	{0x3B08, "Reposition error"},
-	{0x3B09, "Read past end of medium"},
-	{0x3B0A, "Read past beginning of medium"},
-	{0x3B0B, "Position past end of medium"},
-	{0x3B0C, "Position past beginning of medium"},
-	{0x3B0D, "Medium destination element full"},
-	{0x3B0E, "Medium source element empty"},
-	{0x3B0F, "End of medium reached"},
-	{0x3B11, "Medium magazine not accessible"},
-	{0x3B12, "Medium magazine removed"},
-	{0x3B13, "Medium magazine inserted"},
-	{0x3B14, "Medium magazine locked"},
-	{0x3B15, "Medium magazine unlocked"},
-	{0x3B16, "Mechanical positioning or changer error"},
-	{0x3B17, "Read past end of user object"},
-	{0x3B18, "Element disabled"},
-	{0x3B19, "Element enabled"},
-	{0x3B1A, "Data transfer device removed"},
-	{0x3B1B, "Data transfer device inserted"},
-	{0x3B1C, "Too many logical objects on partition to support "
-	 "operation"},
-
-	{0x3D00, "Invalid bits in identify message"},
-
-	{0x3E00, "Logical unit has not self-configured yet"},
-	{0x3E01, "Logical unit failure"},
-	{0x3E02, "Timeout on logical unit"},
-	{0x3E03, "Logical unit failed self-test"},
-	{0x3E04, "Logical unit unable to update self-test log"},
-
-	{0x3F00, "Target operating conditions have changed"},
-	{0x3F01, "Microcode has been changed"},
-	{0x3F02, "Changed operating definition"},
-	{0x3F03, "Inquiry data has changed"},
-	{0x3F04, "Component device attached"},
-	{0x3F05, "Device identifier changed"},
-	{0x3F06, "Redundancy group created or modified"},
-	{0x3F07, "Redundancy group deleted"},
-	{0x3F08, "Spare created or modified"},
-	{0x3F09, "Spare deleted"},
-	{0x3F0A, "Volume set created or modified"},
-	{0x3F0B, "Volume set deleted"},
-	{0x3F0C, "Volume set deassigned"},
-	{0x3F0D, "Volume set reassigned"},
-	{0x3F0E, "Reported luns data has changed"},
-	{0x3F0F, "Echo buffer overwritten"},
-	{0x3F10, "Medium loadable"},
-	{0x3F11, "Medium auxiliary memory accessible"},
-	{0x3F12, "iSCSI IP address added"},
-	{0x3F13, "iSCSI IP address removed"},
-	{0x3F14, "iSCSI IP address changed"},
-	{0x3F15, "Inspect referrals sense descriptors"},
-	{0x3F16, "Microcode has been changed without reset"},
-/*
- *	{0x40NN, "Ram failure"},
- *	{0x40NN, "Diagnostic failure on component nn"},
- *	{0x41NN, "Data path failure"},
- *	{0x42NN, "Power-on or self-test failure"},
- */
-	{0x4300, "Message error"},
-
-	{0x4400, "Internal target failure"},
-	{0x4401, "Persistent reservation information lost"},
-	{0x4471, "ATA device failed set features"},
-
-	{0x4500, "Select or reselect failure"},
-
-	{0x4600, "Unsuccessful soft reset"},
-
-	{0x4700, "Scsi parity error"},
-	{0x4701, "Data phase CRC error detected"},
-	{0x4702, "Scsi parity error detected during st data phase"},
-	{0x4703, "Information unit iuCRC error detected"},
-	{0x4704, "Asynchronous information protection error detected"},
-	{0x4705, "Protocol service CRC error"},
-	{0x4706, "Phy test function in progress"},
-	{0x477f, "Some commands cleared by iSCSI Protocol event"},
-
-	{0x4800, "Initiator detected error message received"},
-
-	{0x4900, "Invalid message error"},
-
-	{0x4A00, "Command phase error"},
-
-	{0x4B00, "Data phase error"},
-	{0x4B01, "Invalid target port transfer tag received"},
-	{0x4B02, "Too much write data"},
-	{0x4B03, "Ack/nak timeout"},
-	{0x4B04, "Nak received"},
-	{0x4B05, "Data offset error"},
-	{0x4B06, "Initiator response timeout"},
-	{0x4B07, "Connection lost"},
-	{0x4B08, "Data-in buffer overflow - data buffer size"},
-	{0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
-	{0x4B0A, "Data-in buffer error"},
-	{0x4B0B, "Data-out buffer overflow - data buffer size"},
-	{0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
-	{0x4B0D, "Data-out buffer error"},
-	{0x4B0E, "PCIe fabric error"},
-	{0x4B0F, "PCIe completion timeout"},
-	{0x4B10, "PCIe completer abort"},
-	{0x4B11, "PCIe poisoned tlp received"},
-	{0x4B12, "PCIe eCRC check failed"},
-	{0x4B13, "PCIe unsupported request"},
-	{0x4B14, "PCIe acs violation"},
-	{0x4B15, "PCIe tlp prefix blocked"},
-
-	{0x4C00, "Logical unit failed self-configuration"},
-/*
- *	{0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
- */
-	{0x4E00, "Overlapped commands attempted"},
-
-	{0x5000, "Write append error"},
-	{0x5001, "Write append position error"},
-	{0x5002, "Position error related to timing"},
-
-	{0x5100, "Erase failure"},
-	{0x5101, "Erase failure - incomplete erase operation detected"},
-
-	{0x5200, "Cartridge fault"},
-
-	{0x5300, "Media load or eject failed"},
-	{0x5301, "Unload tape failure"},
-	{0x5302, "Medium removal prevented"},
-	{0x5303, "Medium removal prevented by data transfer element"},
-	{0x5304, "Medium thread or unthread failure"},
-	{0x5305, "Volume identifier invalid"},
-	{0x5306, "Volume identifier missing"},
-	{0x5307, "Duplicate volume identifier"},
-	{0x5308, "Element status unknown"},
-	{0x5309, "Data transfer device error - load failed"},
-	{0x530a, "Data transfer device error - unload failed"},
-	{0x530b, "Data transfer device error - unload missing"},
-	{0x530c, "Data transfer device error - eject failed"},
-	{0x530d, "Data transfer device error - library communication failed"},
-
-	{0x5400, "Scsi to host system interface failure"},
-
-	{0x5500, "System resource failure"},
-	{0x5501, "System buffer full"},
-	{0x5502, "Insufficient reservation resources"},
-	{0x5503, "Insufficient resources"},
-	{0x5504, "Insufficient registration resources"},
-	{0x5505, "Insufficient access control resources"},
-	{0x5506, "Auxiliary memory out of space"},
-	{0x5507, "Quota error"},
-	{0x5508, "Maximum number of supplemental decryption keys exceeded"},
-	{0x5509, "Medium auxiliary memory not accessible"},
-	{0x550A, "Data currently unavailable"},
-	{0x550B, "Insufficient power for operation"},
-	{0x550C, "Insufficient resources to create rod"},
-	{0x550D, "Insufficient resources to create rod token"},
-	{0x550E, "Insufficient zone resources"},
-
-	{0x5700, "Unable to recover table-of-contents"},
-
-	{0x5800, "Generation does not exist"},
-
-	{0x5900, "Updated block read"},
-
-	{0x5A00, "Operator request or state change input"},
-	{0x5A01, "Operator medium removal request"},
-	{0x5A02, "Operator selected write protect"},
-	{0x5A03, "Operator selected write permit"},
-
-	{0x5B00, "Log exception"},
-	{0x5B01, "Threshold condition met"},
-	{0x5B02, "Log counter at maximum"},
-	{0x5B03, "Log list codes exhausted"},
-
-	{0x5C00, "Rpl status change"},
-	{0x5C01, "Spindles synchronized"},
-	{0x5C02, "Spindles not synchronized"},
-
-	{0x5D00, "Failure prediction threshold exceeded"},
-	{0x5D01, "Media failure prediction threshold exceeded"},
-	{0x5D02, "Logical unit failure prediction threshold exceeded"},
-	{0x5D03, "Spare area exhaustion prediction threshold exceeded"},
-	{0x5D10, "Hardware impending failure general hard drive failure"},
-	{0x5D11, "Hardware impending failure drive error rate too high"},
-	{0x5D12, "Hardware impending failure data error rate too high"},
-	{0x5D13, "Hardware impending failure seek error rate too high"},
-	{0x5D14, "Hardware impending failure too many block reassigns"},
-	{0x5D15, "Hardware impending failure access times too high"},
-	{0x5D16, "Hardware impending failure start unit times too high"},
-	{0x5D17, "Hardware impending failure channel parametrics"},
-	{0x5D18, "Hardware impending failure controller detected"},
-	{0x5D19, "Hardware impending failure throughput performance"},
-	{0x5D1A, "Hardware impending failure seek time performance"},
-	{0x5D1B, "Hardware impending failure spin-up retry count"},
-	{0x5D1C, "Hardware impending failure drive calibration retry count"},
-	{0x5D20, "Controller impending failure general hard drive failure"},
-	{0x5D21, "Controller impending failure drive error rate too high"},
-	{0x5D22, "Controller impending failure data error rate too high"},
-	{0x5D23, "Controller impending failure seek error rate too high"},
-	{0x5D24, "Controller impending failure too many block reassigns"},
-	{0x5D25, "Controller impending failure access times too high"},
-	{0x5D26, "Controller impending failure start unit times too high"},
-	{0x5D27, "Controller impending failure channel parametrics"},
-	{0x5D28, "Controller impending failure controller detected"},
-	{0x5D29, "Controller impending failure throughput performance"},
-	{0x5D2A, "Controller impending failure seek time performance"},
-	{0x5D2B, "Controller impending failure spin-up retry count"},
-	{0x5D2C, "Controller impending failure drive calibration retry count"},
-	{0x5D30, "Data channel impending failure general hard drive failure"},
-	{0x5D31, "Data channel impending failure drive error rate too high"},
-	{0x5D32, "Data channel impending failure data error rate too high"},
-	{0x5D33, "Data channel impending failure seek error rate too high"},
-	{0x5D34, "Data channel impending failure too many block reassigns"},
-	{0x5D35, "Data channel impending failure access times too high"},
-	{0x5D36, "Data channel impending failure start unit times too high"},
-	{0x5D37, "Data channel impending failure channel parametrics"},
-	{0x5D38, "Data channel impending failure controller detected"},
-	{0x5D39, "Data channel impending failure throughput performance"},
-	{0x5D3A, "Data channel impending failure seek time performance"},
-	{0x5D3B, "Data channel impending failure spin-up retry count"},
-	{0x5D3C, "Data channel impending failure drive calibration retry "
-	 "count"},
-	{0x5D40, "Servo impending failure general hard drive failure"},
-	{0x5D41, "Servo impending failure drive error rate too high"},
-	{0x5D42, "Servo impending failure data error rate too high"},
-	{0x5D43, "Servo impending failure seek error rate too high"},
-	{0x5D44, "Servo impending failure too many block reassigns"},
-	{0x5D45, "Servo impending failure access times too high"},
-	{0x5D46, "Servo impending failure start unit times too high"},
-	{0x5D47, "Servo impending failure channel parametrics"},
-	{0x5D48, "Servo impending failure controller detected"},
-	{0x5D49, "Servo impending failure throughput performance"},
-	{0x5D4A, "Servo impending failure seek time performance"},
-	{0x5D4B, "Servo impending failure spin-up retry count"},
-	{0x5D4C, "Servo impending failure drive calibration retry count"},
-	{0x5D50, "Spindle impending failure general hard drive failure"},
-	{0x5D51, "Spindle impending failure drive error rate too high"},
-	{0x5D52, "Spindle impending failure data error rate too high"},
-	{0x5D53, "Spindle impending failure seek error rate too high"},
-	{0x5D54, "Spindle impending failure too many block reassigns"},
-	{0x5D55, "Spindle impending failure access times too high"},
-	{0x5D56, "Spindle impending failure start unit times too high"},
-	{0x5D57, "Spindle impending failure channel parametrics"},
-	{0x5D58, "Spindle impending failure controller detected"},
-	{0x5D59, "Spindle impending failure throughput performance"},
-	{0x5D5A, "Spindle impending failure seek time performance"},
-	{0x5D5B, "Spindle impending failure spin-up retry count"},
-	{0x5D5C, "Spindle impending failure drive calibration retry count"},
-	{0x5D60, "Firmware impending failure general hard drive failure"},
-	{0x5D61, "Firmware impending failure drive error rate too high"},
-	{0x5D62, "Firmware impending failure data error rate too high"},
-	{0x5D63, "Firmware impending failure seek error rate too high"},
-	{0x5D64, "Firmware impending failure too many block reassigns"},
-	{0x5D65, "Firmware impending failure access times too high"},
-	{0x5D66, "Firmware impending failure start unit times too high"},
-	{0x5D67, "Firmware impending failure channel parametrics"},
-	{0x5D68, "Firmware impending failure controller detected"},
-	{0x5D69, "Firmware impending failure throughput performance"},
-	{0x5D6A, "Firmware impending failure seek time performance"},
-	{0x5D6B, "Firmware impending failure spin-up retry count"},
-	{0x5D6C, "Firmware impending failure drive calibration retry count"},
-	{0x5DFF, "Failure prediction threshold exceeded (false)"},
-
-	{0x5E00, "Low power condition on"},
-	{0x5E01, "Idle condition activated by timer"},
-	{0x5E02, "Standby condition activated by timer"},
-	{0x5E03, "Idle condition activated by command"},
-	{0x5E04, "Standby condition activated by command"},
-	{0x5E05, "Idle_b condition activated by timer"},
-	{0x5E06, "Idle_b condition activated by command"},
-	{0x5E07, "Idle_c condition activated by timer"},
-	{0x5E08, "Idle_c condition activated by command"},
-	{0x5E09, "Standby_y condition activated by timer"},
-	{0x5E0A, "Standby_y condition activated by command"},
-	{0x5E41, "Power state change to active"},
-	{0x5E42, "Power state change to idle"},
-	{0x5E43, "Power state change to standby"},
-	{0x5E45, "Power state change to sleep"},
-	{0x5E47, "Power state change to device control"},
-
-	{0x6000, "Lamp failure"},
-
-	{0x6100, "Video acquisition error"},
-	{0x6101, "Unable to acquire video"},
-	{0x6102, "Out of focus"},
-
-	{0x6200, "Scan head positioning error"},
-
-	{0x6300, "End of user area encountered on this track"},
-	{0x6301, "Packet does not fit in available space"},
-
-	{0x6400, "Illegal mode for this track"},
-	{0x6401, "Invalid packet size"},
-
-	{0x6500, "Voltage fault"},
-
-	{0x6600, "Automatic document feeder cover up"},
-	{0x6601, "Automatic document feeder lift up"},
-	{0x6602, "Document jam in automatic document feeder"},
-	{0x6603, "Document miss feed automatic in document feeder"},
-
-	{0x6700, "Configuration failure"},
-	{0x6701, "Configuration of incapable logical units failed"},
-	{0x6702, "Add logical unit failed"},
-	{0x6703, "Modification of logical unit failed"},
-	{0x6704, "Exchange of logical unit failed"},
-	{0x6705, "Remove of logical unit failed"},
-	{0x6706, "Attachment of logical unit failed"},
-	{0x6707, "Creation of logical unit failed"},
-	{0x6708, "Assign failure occurred"},
-	{0x6709, "Multiply assigned logical unit"},
-	{0x670A, "Set target port groups command failed"},
-	{0x670B, "ATA device feature not enabled"},
-
-	{0x6800, "Logical unit not configured"},
-	{0x6801, "Subsidiary logical unit not configured"},
-
-	{0x6900, "Data loss on logical unit"},
-	{0x6901, "Multiple logical unit failures"},
-	{0x6902, "Parity/data mismatch"},
-
-	{0x6A00, "Informational, refer to log"},
-
-	{0x6B00, "State change has occurred"},
-	{0x6B01, "Redundancy level got better"},
-	{0x6B02, "Redundancy level got worse"},
-
-	{0x6C00, "Rebuild failure occurred"},
-
-	{0x6D00, "Recalculate failure occurred"},
-
-	{0x6E00, "Command to logical unit failed"},
-
-	{0x6F00, "Copy protection key exchange failure - authentication "
-	 "failure"},
-	{0x6F01, "Copy protection key exchange failure - key not present"},
-	{0x6F02, "Copy protection key exchange failure - key not established"},
-	{0x6F03, "Read of scrambled sector without authentication"},
-	{0x6F04, "Media region code is mismatched to logical unit region"},
-	{0x6F05, "Drive region must be permanent/region reset count error"},
-	{0x6F06, "Insufficient block count for binding nonce recording"},
-	{0x6F07, "Conflict in binding nonce recording"},
-/*
- *	{0x70NN, "Decompression exception short algorithm id of nn"},
- */
-	{0x7100, "Decompression exception long algorithm id"},
-
-	{0x7200, "Session fixation error"},
-	{0x7201, "Session fixation error writing lead-in"},
-	{0x7202, "Session fixation error writing lead-out"},
-	{0x7203, "Session fixation error - incomplete track in session"},
-	{0x7204, "Empty or partially written reserved track"},
-	{0x7205, "No more track reservations allowed"},
-	{0x7206, "RMZ extension is not allowed"},
-	{0x7207, "No more test zone extensions are allowed"},
-
-	{0x7300, "Cd control error"},
-	{0x7301, "Power calibration area almost full"},
-	{0x7302, "Power calibration area is full"},
-	{0x7303, "Power calibration area error"},
-	{0x7304, "Program memory area update failure"},
-	{0x7305, "Program memory area is full"},
-	{0x7306, "RMA/PMA is almost full"},
-	{0x7310, "Current power calibration area almost full"},
-	{0x7311, "Current power calibration area is full"},
-	{0x7317, "RDZ is full"},
-
-	{0x7400, "Security error"},
-	{0x7401, "Unable to decrypt data"},
-	{0x7402, "Unencrypted data encountered while decrypting"},
-	{0x7403, "Incorrect data encryption key"},
-	{0x7404, "Cryptographic integrity validation failed"},
-	{0x7405, "Error decrypting data"},
-	{0x7406, "Unknown signature verification key"},
-	{0x7407, "Encryption parameters not useable"},
-	{0x7408, "Digital signature validation failure"},
-	{0x7409, "Encryption mode mismatch on read"},
-	{0x740A, "Encrypted block not raw read enabled"},
-	{0x740B, "Incorrect Encryption parameters"},
-	{0x740C, "Unable to decrypt parameter list"},
-	{0x740D, "Encryption algorithm disabled"},
-	{0x7410, "SA creation parameter value invalid"},
-	{0x7411, "SA creation parameter value rejected"},
-	{0x7412, "Invalid SA usage"},
-	{0x7421, "Data Encryption configuration prevented"},
-	{0x7430, "SA creation parameter not supported"},
-	{0x7440, "Authentication failed"},
-	{0x7461, "External data encryption key manager access error"},
-	{0x7462, "External data encryption key manager error"},
-	{0x7463, "External data encryption key not found"},
-	{0x7464, "External data encryption request not authorized"},
-	{0x746E, "External data encryption control timeout"},
-	{0x746F, "External data encryption control error"},
-	{0x7471, "Logical unit access not authorized"},
-	{0x7479, "Security conflict in translated device"},
-
-	{0, NULL}
+#define SENSE_CODE(c, s) {c, sizeof(s)},
+#include "sense_codes.h"
+#undef SENSE_CODE
 };
 
+static const char *additional_text =
+#define SENSE_CODE(c, s) s "\0"
+#include "sense_codes.h"
+#undef SENSE_CODE
+	;
+
 struct error_info2 {
 	unsigned char code1, code2_min, code2_max;
 	const char * str;
@@ -1197,11 +377,14 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
 {
 	int i;
 	unsigned short code = ((asc << 8) | ascq);
+	unsigned offset = 0;
 
 	*fmt = NULL;
-	for (i = 0; additional[i].text; i++)
+	for (i = 0; i < ARRAY_SIZE(additional); i++) {
 		if (additional[i].code12 == code)
-			return additional[i].text;
+			return additional_text + offset;
+		offset += additional[i].size;
+	}
 	for (i = 0; additional2[i].fmt; i++) {
 		if (additional2[i].code1 == asc &&
 		    ascq >= additional2[i].code2_min &&
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 35968bdb4866..8fb9643fe6e3 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -289,7 +289,7 @@ static void context_reset(struct afu_cmd *cmd)
 		atomic64_set(&afu->room, room);
 		if (room)
 			goto write_rrin;
-		udelay(nretry);
+		udelay(1 << nretry);
 	} while (nretry++ < MC_ROOM_RETRY_CNT);
 
 	pr_err("%s: no cmd_room to send reset\n", __func__);
@@ -303,7 +303,7 @@ write_rrin:
 		if (rrin != 0x1)
 			break;
 		/* Double delay each time */
-		udelay(2 << nretry);
+		udelay(1 << nretry);
 	} while (nretry++ < MC_ROOM_RETRY_CNT);
 }
 
@@ -338,7 +338,7 @@ retry:
 			atomic64_set(&afu->room, room);
 			if (room)
 				goto write_ioarrin;
-			udelay(nretry);
+			udelay(1 << nretry);
 		} while (nretry++ < MC_ROOM_RETRY_CNT);
 
 		dev_err(dev, "%s: no cmd_room to send 0x%X\n",
@@ -352,7 +352,7 @@ retry:
 		 * afu->room.
 		 */
 		if (nretry++ < MC_ROOM_RETRY_CNT) {
-			udelay(nretry);
+			udelay(1 << nretry);
 			goto retry;
 		}
 
@@ -683,28 +683,23 @@ static void stop_afu(struct cxlflash_cfg *cfg)
 }
 
 /**
- * term_mc() - terminates the master context
+ * term_intr() - disables all AFU interrupts
  * @cfg:	Internal structure associated with the host.
  * @level:	Depth of allocation, where to begin waterfall tear down.
  *
  * Safe to call with AFU/MC in partially allocated/initialized state.
  */
-static void term_mc(struct cxlflash_cfg *cfg, enum undo_level level)
+static void term_intr(struct cxlflash_cfg *cfg, enum undo_level level)
 {
-	int rc = 0;
 	struct afu *afu = cfg->afu;
 	struct device *dev = &cfg->dev->dev;
 
 	if (!afu || !cfg->mcctx) {
-		dev_err(dev, "%s: returning from term_mc with NULL afu or MC\n",
-		       __func__);
+		dev_err(dev, "%s: returning with NULL afu or MC\n", __func__);
 		return;
 	}
 
 	switch (level) {
-	case UNDO_START:
-		rc = cxl_stop_context(cfg->mcctx);
-		BUG_ON(rc);
 	case UNMAP_THREE:
 		cxl_unmap_afu_irq(cfg->mcctx, 3, afu);
 	case UNMAP_TWO:
@@ -713,9 +708,34 @@ static void term_mc(struct cxlflash_cfg *cfg, enum undo_level level)
 		cxl_unmap_afu_irq(cfg->mcctx, 1, afu);
 	case FREE_IRQ:
 		cxl_free_afu_irqs(cfg->mcctx);
-	case RELEASE_CONTEXT:
-		cfg->mcctx = NULL;
+		/* fall through */
+	case UNDO_NOOP:
+		/* No action required */
+		break;
+	}
+}
+
+/**
+ * term_mc() - terminates the master context
+ * @cfg:	Internal structure associated with the host.
+ * @level:	Depth of allocation, where to begin waterfall tear down.
+ *
+ * Safe to call with AFU/MC in partially allocated/initialized state.
+ */
+static void term_mc(struct cxlflash_cfg *cfg)
+{
+	int rc = 0;
+	struct afu *afu = cfg->afu;
+	struct device *dev = &cfg->dev->dev;
+
+	if (!afu || !cfg->mcctx) {
+		dev_err(dev, "%s: returning with NULL afu or MC\n", __func__);
+		return;
 	}
+
+	rc = cxl_stop_context(cfg->mcctx);
+	WARN_ON(rc);
+	cfg->mcctx = NULL;
 }
 
 /**
@@ -726,10 +746,20 @@ static void term_mc(struct cxlflash_cfg *cfg, enum undo_level level)
  */
 static void term_afu(struct cxlflash_cfg *cfg)
 {
+	/*
+	 * Tear down is carefully orchestrated to ensure
+	 * no interrupts can come in when the problem state
+	 * area is unmapped.
+	 *
+	 * 1) Disable all AFU interrupts
+	 * 2) Unmap the problem state area
+	 * 3) Stop the master context
+	 */
+	term_intr(cfg, UNMAP_THREE);
 	if (cfg->afu)
 		stop_afu(cfg);
 
-	term_mc(cfg, UNDO_START);
+	term_mc(cfg);
 
 	pr_debug("%s: returning\n", __func__);
 }
@@ -1597,41 +1627,24 @@ static int start_afu(struct cxlflash_cfg *cfg)
 }
 
 /**
- * init_mc() - create and register as the master context
+ * init_intr() - setup interrupt handlers for the master context
  * @cfg:	Internal structure associated with the host.
  *
  * Return: 0 on success, -errno on failure
  */
-static int init_mc(struct cxlflash_cfg *cfg)
+static enum undo_level init_intr(struct cxlflash_cfg *cfg,
+				 struct cxl_context *ctx)
 {
-	struct cxl_context *ctx;
-	struct device *dev = &cfg->dev->dev;
 	struct afu *afu = cfg->afu;
+	struct device *dev = &cfg->dev->dev;
 	int rc = 0;
-	enum undo_level level;
-
-	ctx = cxl_get_context(cfg->dev);
-	if (unlikely(!ctx))
-		return -ENOMEM;
-	cfg->mcctx = ctx;
-
-	/* Set it up as a master with the CXL */
-	cxl_set_master(ctx);
-
-	/* During initialization reset the AFU to start from a clean slate */
-	rc = cxl_afu_reset(cfg->mcctx);
-	if (unlikely(rc)) {
-		dev_err(dev, "%s: initial AFU reset failed rc=%d\n",
-			__func__, rc);
-		level = RELEASE_CONTEXT;
-		goto out;
-	}
+	enum undo_level level = UNDO_NOOP;
 
 	rc = cxl_allocate_afu_irqs(ctx, 3);
 	if (unlikely(rc)) {
 		dev_err(dev, "%s: call to allocate_afu_irqs failed rc=%d!\n",
 			__func__, rc);
-		level = RELEASE_CONTEXT;
+		level = UNDO_NOOP;
 		goto out;
 	}
 
@@ -1661,8 +1674,47 @@ static int init_mc(struct cxlflash_cfg *cfg)
 		level = UNMAP_TWO;
 		goto out;
 	}
+out:
+	return level;
+}
 
-	rc = 0;
+/**
+ * init_mc() - create and register as the master context
+ * @cfg:	Internal structure associated with the host.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int init_mc(struct cxlflash_cfg *cfg)
+{
+	struct cxl_context *ctx;
+	struct device *dev = &cfg->dev->dev;
+	int rc = 0;
+	enum undo_level level;
+
+	ctx = cxl_get_context(cfg->dev);
+	if (unlikely(!ctx)) {
+		rc = -ENOMEM;
+		goto ret;
+	}
+	cfg->mcctx = ctx;
+
+	/* Set it up as a master with the CXL */
+	cxl_set_master(ctx);
+
+	/* During initialization reset the AFU to start from a clean slate */
+	rc = cxl_afu_reset(cfg->mcctx);
+	if (unlikely(rc)) {
+		dev_err(dev, "%s: initial AFU reset failed rc=%d\n",
+			__func__, rc);
+		goto ret;
+	}
+
+	level = init_intr(cfg, ctx);
+	if (unlikely(level)) {
+		dev_err(dev, "%s: setting up interrupts failed rc=%d\n",
+			__func__, rc);
+		goto out;
+	}
 
 	/* This performs the equivalent of the CXL_IOCTL_START_WORK.
 	 * The CXL_IOCTL_GET_PROCESS_ELEMENT is implicit in the process
@@ -1678,7 +1730,7 @@ ret:
 	pr_debug("%s: returning rc=%d\n", __func__, rc);
 	return rc;
 out:
-	term_mc(cfg, level);
+	term_intr(cfg, level);
 	goto ret;
 }
 
@@ -1751,7 +1803,8 @@ out:
 err2:
 	kref_put(&afu->mapcount, afu_unmap);
 err1:
-	term_mc(cfg, UNDO_START);
+	term_intr(cfg, UNMAP_THREE);
+	term_mc(cfg);
 	goto out;
 }
 
@@ -2488,8 +2541,7 @@ static pci_ers_result_t cxlflash_pci_error_detected(struct pci_dev *pdev,
 		if (unlikely(rc))
 			dev_err(dev, "%s: Failed to mark user contexts!(%d)\n",
 				__func__, rc);
-		stop_afu(cfg);
-		term_mc(cfg, UNDO_START);
+		term_afu(cfg);
 		return PCI_ERS_RESULT_NEED_RESET;
 	case pci_channel_io_perm_failure:
 		cfg->state = STATE_FAILTERM;
diff --git a/drivers/scsi/cxlflash/main.h b/drivers/scsi/cxlflash/main.h
index 0faed422c7f4..eb9d8f730b38 100644
--- a/drivers/scsi/cxlflash/main.h
+++ b/drivers/scsi/cxlflash/main.h
@@ -79,12 +79,11 @@
 #define WWPN_BUF_LEN	(WWPN_LEN + 1)
 
 enum undo_level {
-	RELEASE_CONTEXT = 0,
+	UNDO_NOOP = 0,
 	FREE_IRQ,
 	UNMAP_ONE,
 	UNMAP_TWO,
-	UNMAP_THREE,
-	UNDO_START
+	UNMAP_THREE
 };
 
 struct dev_dependent_vals {
diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
index d8a5cb3cd2bd..ce1507023132 100644
--- a/drivers/scsi/cxlflash/superpipe.c
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -1615,6 +1615,13 @@ err1:
  * place at the same time and the failure was due to CXL services being
  * unable to keep up.
  *
+ * As this routine is called on ioctl context, it holds the ioctl r/w
+ * semaphore that is used to drain ioctls in recovery scenarios. The
+ * implementation to achieve the pacing described above (a local mutex)
+ * requires that the ioctl r/w semaphore be dropped and reacquired to
+ * avoid a 3-way deadlock when multiple process recoveries operate in
+ * parallel.
+ *
  * Because a user can detect an error condition before the kernel, it is
  * quite possible for this routine to act as the kernel's EEH detection
  * source (MMIO read of mbox_r). Because of this, there is a window of
@@ -1642,9 +1649,17 @@ static int cxlflash_afu_recover(struct scsi_device *sdev,
 	int rc = 0;
 
 	atomic_inc(&cfg->recovery_threads);
+	up_read(&cfg->ioctl_rwsem);
 	rc = mutex_lock_interruptible(mutex);
+	down_read(&cfg->ioctl_rwsem);
 	if (rc)
 		goto out;
+	rc = check_state(cfg);
+	if (rc) {
+		dev_err(dev, "%s: Failed state! rc=%d\n", __func__, rc);
+		rc = -ENODEV;
+		goto out;
+	}
 
 	dev_dbg(dev, "%s: reason 0x%016llX rctxid=%016llX\n",
 		__func__, recover->reason, rctxid);
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index a404a41e871c..e034f12c1418 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -190,8 +190,8 @@ static int submit_stpg(struct scsi_device *sdev, int group_id,
 				      ALUA_FAILOVER_RETRIES, NULL, req_flags);
 }
 
-struct alua_port_group *alua_find_get_pg(char *id_str, size_t id_size,
-					 int group_id)
+static struct alua_port_group *alua_find_get_pg(char *id_str, size_t id_size,
+						int group_id)
 {
 	struct alua_port_group *pg;
 
@@ -219,8 +219,8 @@ struct alua_port_group *alua_find_get_pg(char *id_str, size_t id_size,
  * Allocate a new port_group structure for a given
  * device.
  */
-struct alua_port_group *alua_alloc_pg(struct scsi_device *sdev,
-				      int group_id, int tpgs)
+static struct alua_port_group *alua_alloc_pg(struct scsi_device *sdev,
+					     int group_id, int tpgs)
 {
 	struct alua_port_group *pg, *tmp_pg;
 
@@ -1112,9 +1112,9 @@ static void alua_bus_detach(struct scsi_device *sdev)
 	h->sdev = NULL;
 	spin_unlock(&h->pg_lock);
 	if (pg) {
-		spin_lock(&pg->lock);
+		spin_lock_irq(&pg->lock);
 		list_del_rcu(&h->node);
-		spin_unlock(&pg->lock);
+		spin_unlock_irq(&pg->lock);
 		kref_put(&pg->kref, release_port_group);
 	}
 	sdev->handler_data = NULL;
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index 6c14e68b9e1a..9b5a457d4bca 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -34,11 +34,14 @@
  * Definitions for the generic 5380 driver.
  */
 
-#define DONT_USE_INTR
-
 #define NCR5380_read(reg)		inb(instance->io_port + reg)
 #define NCR5380_write(reg, value)	outb(value, instance->io_port + reg)
 
+#define NCR5380_dma_xfer_len(instance, cmd, phase)	(0)
+#define NCR5380_dma_recv_setup(instance, dst, len)	(0)
+#define NCR5380_dma_send_setup(instance, src, len)	(0)
+#define NCR5380_dma_residual(instance)			(0)
+
 #define NCR5380_implementation_fields	/* none */
 
 #include "NCR5380.h"
@@ -62,7 +65,6 @@ static struct scsi_host_template dmx3191d_driver_template = {
 	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.cmd_size		= NCR5380_CMD_SIZE,
-	.max_sectors		= 128,
 };
 
 static int dmx3191d_probe_one(struct pci_dev *pdev,
@@ -93,7 +95,7 @@ static int dmx3191d_probe_one(struct pci_dev *pdev,
 	 */
 	shost->irq = NO_IRQ;
 
-	error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA);
+	error = NCR5380_init(shost, 0);
 	if (error)
 		goto out_host_put;
 
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index 6c736b071cf4..459863f94e46 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -1,6 +1,3 @@
-#define PSEUDO_DMA
-#define DONT_USE_INTR
-
 /*
  * DTC 3180/3280 driver, by
  *	Ray Van Tassle	rayvt@comm.mot.com
@@ -54,7 +51,6 @@
 #include <scsi/scsi_host.h>
 
 #include "dtc.h"
-#define AUTOPROBE_IRQ
 #include "NCR5380.h"
 
 /*
@@ -229,7 +225,7 @@ found:
 		instance->base = addr;
 		((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
 
-		if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP))
+		if (NCR5380_init(instance, FLAG_LATE_DMA_SETUP))
 			goto out_unregister;
 
 		NCR5380_maybe_reset_bus(instance);
@@ -244,9 +240,10 @@ found:
 		if (instance->irq == 255)
 			instance->irq = NO_IRQ;
 
-#ifndef DONT_USE_INTR
 		/* With interrupts enabled, it will sometimes hang when doing heavy
 		 * reads. So better not enable them until I finger it out. */
+		instance->irq = NO_IRQ;
+
 		if (instance->irq != NO_IRQ)
 			if (request_irq(instance->irq, dtc_intr, 0,
 					"dtc", instance)) {
@@ -258,11 +255,7 @@ found:
 			printk(KERN_WARNING "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
 			printk(KERN_WARNING "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
 		}
-#else
-		if (instance->irq != NO_IRQ)
-			printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
-		instance->irq = NO_IRQ;
-#endif
+
 		dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
 		        instance->host_no, instance->irq);
 
@@ -323,7 +316,8 @@ static int dtc_biosparam(struct scsi_device *sdev, struct block_device *dev,
  * 	timeout.
 */
 
-static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
+static inline int dtc_pread(struct Scsi_Host *instance,
+                            unsigned char *dst, int len)
 {
 	unsigned char *d = dst;
 	int i;			/* For counting time spent in the poll-loop */
@@ -352,8 +346,6 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
 	while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS))
 		++i;
 	rtrc(0);
-	if (i > hostdata->spin_max_r)
-		hostdata->spin_max_r = i;
 	return (0);
 }
 
@@ -370,7 +362,8 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
  * 	timeout.
 */
 
-static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
+static inline int dtc_pwrite(struct Scsi_Host *instance,
+                             unsigned char *src, int len)
 {
 	int i;
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
@@ -400,8 +393,6 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
 	rtrc(7);
 	/* Check for parity error here. fixme. */
 	rtrc(0);
-	if (i > hostdata->spin_max_w)
-		hostdata->spin_max_w = i;
 	return (0);
 }
 
@@ -440,8 +431,6 @@ static struct scsi_host_template driver_template = {
 	.detect			= dtc_detect,
 	.release		= dtc_release,
 	.proc_name		= "dtc3x80",
-	.show_info		= dtc_show_info,
-	.write_info		= dtc_write_info,
 	.info			= dtc_info,
 	.queuecommand		= dtc_queue_command,
 	.eh_abort_handler	= dtc_abort,
diff --git a/drivers/scsi/dtc.h b/drivers/scsi/dtc.h
index 56732cba8aba..fcb0a8ea7bda 100644
--- a/drivers/scsi/dtc.h
+++ b/drivers/scsi/dtc.h
@@ -21,14 +21,17 @@
 
 #define NCR5380_dma_xfer_len(instance, cmd, phase) \
         dtc_dma_xfer_len(cmd)
+#define NCR5380_dma_recv_setup		dtc_pread
+#define NCR5380_dma_send_setup		dtc_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_intr			dtc_intr
 #define NCR5380_queue_command		dtc_queue_command
 #define NCR5380_abort			dtc_abort
 #define NCR5380_bus_reset		dtc_bus_reset
 #define NCR5380_info			dtc_info
-#define NCR5380_show_info		dtc_show_info 
-#define NCR5380_write_info		dtc_write_info 
+
+#define NCR5380_io_delay(x)		udelay(x)
 
 /* 15 12 11 10
    1001 1100 0000 0000 */
diff --git a/drivers/scsi/esas2r/esas2r_main.c b/drivers/scsi/esas2r/esas2r_main.c
index 33581ba4386e..2aca4d16f39e 100644
--- a/drivers/scsi/esas2r/esas2r_main.c
+++ b/drivers/scsi/esas2r/esas2r_main.c
@@ -246,7 +246,7 @@ static struct scsi_host_template driver_template = {
 	.eh_target_reset_handler	= esas2r_target_reset,
 	.can_queue			= 128,
 	.this_id			= -1,
-	.sg_tablesize			= SCSI_MAX_SG_SEGMENTS,
+	.sg_tablesize			= SG_CHUNK_SIZE,
 	.cmd_per_lun			=
 		ESAS2R_DEFAULT_CMD_PER_LUN,
 	.present			= 0,
@@ -271,7 +271,7 @@ module_param(num_sg_lists, int, 0);
 MODULE_PARM_DESC(num_sg_lists,
 		 "Number of scatter/gather lists.  Default 1024.");
 
-int sg_tablesize = SCSI_MAX_SG_SEGMENTS;
+int sg_tablesize = SG_CHUNK_SIZE;
 module_param(sg_tablesize, int, 0);
 MODULE_PARM_DESC(sg_tablesize,
 		 "Maximum number of entries in a scatter/gather table.");
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index ce129e595b55..9ddc9200e0a4 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -39,7 +39,7 @@
 
 #define DRV_NAME		"fnic"
 #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
-#define DRV_VERSION		"1.6.0.17a"
+#define DRV_VERSION		"1.6.0.21"
 #define PFX			DRV_NAME ": "
 #define DFX                     DRV_NAME "%d: "
 
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index f3032ca5051b..d9fd2f841585 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -439,7 +439,6 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 	int sg_count = 0;
 	unsigned long flags = 0;
 	unsigned long ptr;
-	struct fc_rport_priv *rdata;
 	spinlock_t *io_lock = NULL;
 	int io_lock_acquired = 0;
 
@@ -455,14 +454,17 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 		return 0;
 	}
 
-	rdata = lp->tt.rport_lookup(lp, rport->port_id);
-	if (!rdata || (rdata->rp_state == RPORT_ST_DELETE)) {
-		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-			"returning IO as rport is removed\n");
-		atomic64_inc(&fnic_stats->misc_stats.rport_not_ready);
-		sc->result = DID_NO_CONNECT;
-		done(sc);
-		return 0;
+	if (rport) {
+		struct fc_rport_libfc_priv *rp = rport->dd_data;
+
+		if (!rp || rp->rp_state != RPORT_ST_READY) {
+			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+				"returning DID_NO_CONNECT for IO as rport is removed\n");
+			atomic64_inc(&fnic_stats->misc_stats.rport_not_ready);
+			sc->result = DID_NO_CONNECT<<16;
+			done(sc);
+			return 0;
+		}
 	}
 
 	if (lp->state != LPORT_ST_READY || !(lp->link_up))
@@ -1091,6 +1093,11 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
 				atomic64_inc(
 					&term_stats->terminate_fw_timeouts);
 			break;
+		case FCPIO_ITMF_REJECTED:
+			FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+				"abort reject recd. id %d\n",
+				(int)(id & FNIC_TAG_MASK));
+			break;
 		case FCPIO_IO_NOT_FOUND:
 			if (CMD_FLAGS(sc) & FNIC_IO_ABTS_ISSUED)
 				atomic64_inc(&abts_stats->abort_io_not_found);
@@ -1111,9 +1118,15 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
 			spin_unlock_irqrestore(io_lock, flags);
 			return;
 		}
-		CMD_ABTS_STATUS(sc) = hdr_status;
+
 		CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE;
 
+		/* If the status is IO not found consider it as success */
+		if (hdr_status == FCPIO_IO_NOT_FOUND)
+			CMD_ABTS_STATUS(sc) = FCPIO_SUCCESS;
+		else
+			CMD_ABTS_STATUS(sc) = hdr_status;
+
 		atomic64_dec(&fnic_stats->io_stats.active_ios);
 		if (atomic64_read(&fnic->io_cmpl_skip))
 			atomic64_dec(&fnic->io_cmpl_skip);
@@ -1926,21 +1939,31 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 
 	CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
 
+	start_time = io_req->start_time;
 	/*
 	 * firmware completed the abort, check the status,
-	 * free the io_req irrespective of failure or success
+	 * free the io_req if successful. If abort fails,
+	 * Device reset will clean the I/O.
 	 */
-	if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS)
+	if (CMD_ABTS_STATUS(sc) == FCPIO_SUCCESS)
+		CMD_SP(sc) = NULL;
+	else {
 		ret = FAILED;
-
-	CMD_SP(sc) = NULL;
+		spin_unlock_irqrestore(io_lock, flags);
+		goto fnic_abort_cmd_end;
+	}
 
 	spin_unlock_irqrestore(io_lock, flags);
 
-	start_time = io_req->start_time;
 	fnic_release_ioreq_buf(fnic, io_req, sc);
 	mempool_free(io_req, fnic->io_req_pool);
 
+	if (sc->scsi_done) {
+	/* Call SCSI completion function to complete the IO */
+		sc->result = (DID_ABORT << 16);
+		sc->scsi_done(sc);
+	}
+
 fnic_abort_cmd_end:
 	FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no,
 		  sc->request->tag, sc,
@@ -2018,7 +2041,9 @@ lr_io_req_end:
  * successfully aborted, 1 otherwise
  */
 static int fnic_clean_pending_aborts(struct fnic *fnic,
-				     struct scsi_cmnd *lr_sc)
+				     struct scsi_cmnd *lr_sc,
+					 bool new_sc)
+
 {
 	int tag, abt_tag;
 	struct fnic_io_req *io_req;
@@ -2036,10 +2061,10 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 		spin_lock_irqsave(io_lock, flags);
 		sc = scsi_host_find_tag(fnic->lport->host, tag);
 		/*
-		 * ignore this lun reset cmd or cmds that do not belong to
-		 * this lun
+		 * ignore this lun reset cmd if issued using new SC
+		 * or cmds that do not belong to this lun
 		 */
-		if (!sc || sc == lr_sc || sc->device != lun_dev) {
+		if (!sc || ((sc == lr_sc) && new_sc) || sc->device != lun_dev) {
 			spin_unlock_irqrestore(io_lock, flags);
 			continue;
 		}
@@ -2145,11 +2170,27 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 			goto clean_pending_aborts_end;
 		}
 		CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
-		CMD_SP(sc) = NULL;
+
+		/* original sc used for lr is handled by dev reset code */
+		if (sc != lr_sc)
+			CMD_SP(sc) = NULL;
 		spin_unlock_irqrestore(io_lock, flags);
 
-		fnic_release_ioreq_buf(fnic, io_req, sc);
-		mempool_free(io_req, fnic->io_req_pool);
+		/* original sc used for lr is handled by dev reset code */
+		if (sc != lr_sc) {
+			fnic_release_ioreq_buf(fnic, io_req, sc);
+			mempool_free(io_req, fnic->io_req_pool);
+		}
+
+		/*
+		 * Any IO is returned during reset, it needs to call scsi_done
+		 * to return the scsi_cmnd to upper layer.
+		 */
+		if (sc->scsi_done) {
+			/* Set result to let upper SCSI layer retry */
+			sc->result = DID_RESET << 16;
+			sc->scsi_done(sc);
+		}
 	}
 
 	schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov));
@@ -2243,6 +2284,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 	int tag = 0;
 	DECLARE_COMPLETION_ONSTACK(tm_done);
 	int tag_gen_flag = 0;   /*to track tags allocated by fnic driver*/
+	bool new_sc = 0;
 
 	/* Wait for rport to unblock */
 	fc_block_scsi_eh(sc);
@@ -2288,13 +2330,12 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 		 * fix the way the EH ioctls work for real, but until
 		 * that happens we fail these explicit requests here.
 		 */
-		if (shost_use_blk_mq(sc->device->host))
-			goto fnic_device_reset_end;
 
 		tag = fnic_scsi_host_start_tag(fnic, sc);
 		if (unlikely(tag == SCSI_NO_TAG))
 			goto fnic_device_reset_end;
 		tag_gen_flag = 1;
+		new_sc = 1;
 	}
 	io_lock = fnic_io_lock_hash(fnic, sc);
 	spin_lock_irqsave(io_lock, flags);
@@ -2429,7 +2470,7 @@ int fnic_device_reset(struct scsi_cmnd *sc)
 	 * the lun reset cmd. If all cmds get cleaned, the lun reset
 	 * succeeds
 	 */
-	if (fnic_clean_pending_aborts(fnic, sc)) {
+	if (fnic_clean_pending_aborts(fnic, sc, new_sc)) {
 		spin_lock_irqsave(io_lock, flags);
 		io_req = (struct fnic_io_req *)CMD_SP(sc);
 		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 90091e693020..516bd6c4f442 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -18,50 +18,10 @@
  *
  * Added ISAPNP support for DTC436 adapters,
  * Thomas Sailer, sailer@ife.ee.ethz.ch
- */
-
-/* 
- * TODO : flesh out DMA support, find some one actually using this (I have
- * 	a memory mapped Trantor board that works fine)
- */
-
-/*
- * The card is detected and initialized in one of several ways : 
- * 1.  With command line overrides - NCR5380=port,irq may be 
- *     used on the LILO command line to override the defaults.
- *
- * 2.  With the GENERIC_NCR5380_OVERRIDE compile time define.  This is 
- *     specified as an array of address, irq, dma, board tuples.  Ie, for
- *     one board at 0x350, IRQ5, no dma, I could say  
- *     -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}}
- * 
- * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an 
- * 	IRQ line if overridden on the command line.
  *
- * 3.  When included as a module, with arguments passed on the command line:
- *         ncr_irq=xx	the interrupt
- *         ncr_addr=xx  the port or base address (for port or memory
- *              	mapped, resp.)
- *         ncr_dma=xx	the DMA
- *         ncr_5380=1	to set up for a NCR5380 board
- *         ncr_53c400=1	to set up for a NCR53C400 board
- *     e.g.
- *     modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
- *       for a port mapped NCR5380 board or
- *     modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
- *       for a memory mapped NCR53C400 board with interrupts disabled.
- * 
- * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an 
- * 	IRQ line if overridden on the command line.
- *     
+ * See Documentation/scsi/g_NCR5380.txt for more info.
  */
 
-#define AUTOPROBE_IRQ
-
-#ifdef CONFIG_SCSI_GENERIC_NCR53C400
-#define PSEUDO_DMA
-#endif
-
 #include <asm/io.h>
 #include <linux/blkdev.h>
 #include <linux/module.h>
@@ -270,7 +230,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 #ifndef SCSI_G_NCR5380_MEM
 	int i;
 	int port_idx = -1;
-	unsigned long region_size = 16;
+	unsigned long region_size;
 #endif
 	static unsigned int __initdata ncr_53c400a_ports[] = {
 		0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
@@ -290,6 +250,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 #ifdef SCSI_G_NCR5380_MEM
 	unsigned long base;
 	void __iomem *iomem;
+	resource_size_t iomem_size;
 #endif
 
 	if (ncr_irq)
@@ -350,25 +311,17 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		flags = 0;
 		switch (overrides[current_override].board) {
 		case BOARD_NCR5380:
-			flags = FLAG_NO_PSEUDO_DMA;
-			break;
-		case BOARD_NCR53C400:
-#ifdef PSEUDO_DMA
-			flags = FLAG_NO_DMA_FIXUP;
-#endif
+			flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
 			break;
 		case BOARD_NCR53C400A:
-			flags = FLAG_NO_DMA_FIXUP;
 			ports = ncr_53c400a_ports;
 			magic = ncr_53c400a_magic;
 			break;
 		case BOARD_HP_C2502:
-			flags = FLAG_NO_DMA_FIXUP;
 			ports = ncr_53c400a_ports;
 			magic = hp_c2502_magic;
 			break;
 		case BOARD_DTC3181E:
-			flags = FLAG_NO_DMA_FIXUP;
 			ports = dtc_3181e_ports;
 			magic = ncr_53c400a_magic;
 			break;
@@ -381,20 +334,22 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 			/* Disable the adapter and look for a free io port */
 			magic_configure(-1, 0, magic);
 
+			region_size = 16;
+
 			if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
 				for (i = 0; ports[i]; i++) {
-					if (!request_region(ports[i],  16, "ncr53c80"))
+					if (!request_region(ports[i], region_size, "ncr53c80"))
 						continue;
 					if (overrides[current_override].NCR5380_map_name == ports[i])
 						break;
-					release_region(ports[i], 16);
+					release_region(ports[i], region_size);
 			} else
 				for (i = 0; ports[i]; i++) {
-					if (!request_region(ports[i],  16, "ncr53c80"))
+					if (!request_region(ports[i], region_size, "ncr53c80"))
 						continue;
 					if (inb(ports[i]) == 0xff)
 						break;
-					release_region(ports[i], 16);
+					release_region(ports[i], region_size);
 				}
 			if (ports[i]) {
 				/* At this point we have our region reserved */
@@ -410,17 +365,19 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		else
 		{
 			/* Not a 53C400A style setup - just grab */
-			if(!(request_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size, "ncr5380")))
+			region_size = 8;
+			if (!request_region(overrides[current_override].NCR5380_map_name,
+			                    region_size, "ncr5380"))
 				continue;
-			region_size = NCR5380_region_size;
 		}
 #else
 		base = overrides[current_override].NCR5380_map_name;
-		if (!request_mem_region(base, NCR5380_region_size, "ncr5380"))
+		iomem_size = NCR53C400_region_size;
+		if (!request_mem_region(base, iomem_size, "ncr5380"))
 			continue;
-		iomem = ioremap(base, NCR5380_region_size);
+		iomem = ioremap(base, iomem_size);
 		if (!iomem) {
-			release_mem_region(base, NCR5380_region_size);
+			release_mem_region(base, iomem_size);
 			continue;
 		}
 #endif
@@ -458,6 +415,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 #else
 		instance->base = overrides[current_override].NCR5380_map_name;
 		hostdata->iomem = iomem;
+		hostdata->iomem_size = iomem_size;
 		switch (overrides[current_override].board) {
 		case BOARD_NCR53C400:
 			hostdata->c400_ctl_status = 0x100;
@@ -472,7 +430,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		}
 #endif
 
-		if (NCR5380_init(instance, flags))
+		if (NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP))
 			goto out_unregister;
 
 		switch (overrides[current_override].board) {
@@ -524,7 +482,7 @@ out_release:
 	release_region(overrides[current_override].NCR5380_map_name, region_size);
 #else
 	iounmap(iomem);
-	release_mem_region(base, NCR5380_region_size);
+	release_mem_region(base, iomem_size);
 #endif
 	return count;
 }
@@ -546,45 +504,18 @@ static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
 #ifndef SCSI_G_NCR5380_MEM
 	release_region(instance->io_port, instance->n_io_port);
 #else
-	iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
-	release_mem_region(instance->base, NCR5380_region_size);
-#endif
-	return 0;
-}
-
-#ifdef BIOSPARAM
-/**
- *	generic_NCR5380_biosparam
- *	@disk: disk to compute geometry for
- *	@dev: device identifier for this disk
- *	@ip: sizes to fill in
- *
- *	Generates a BIOS / DOS compatible H-C-S mapping for the specified 
- *	device / size.
- * 
- * 	XXX Most SCSI boards use this mapping, I could be incorrect.  Someone
- *	using hard disks on a trantor should verify that this mapping
- *	corresponds to that used by the BIOS / ASPI driver by running the linux
- *	fdisk program and matching the H_C_S coordinates to what DOS uses.
- *
- *	Locks: none
- */
+	{
+		struct NCR5380_hostdata *hostdata = shost_priv(instance);
 
-static int
-generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
-			  sector_t capacity, int *ip)
-{
-	ip[0] = 64;
-	ip[1] = 32;
-	ip[2] = capacity >> 11;
+		iounmap(hostdata->iomem);
+		release_mem_region(instance->base, hostdata->iomem_size);
+	}
+#endif
 	return 0;
 }
-#endif
-
-#ifdef PSEUDO_DMA
 
 /**
- *	NCR5380_pread		-	pseudo DMA read
+ *	generic_NCR5380_pread - pseudo DMA read
  *	@instance: adapter to read from
  *	@dst: buffer to read into
  *	@len: buffer length
@@ -593,7 +524,8 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
  *	controller
  */
  
-static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
+static inline int generic_NCR5380_pread(struct Scsi_Host *instance,
+                                        unsigned char *dst, int len)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int blocks = len / 128;
@@ -661,7 +593,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
 }
 
 /**
- *	NCR5380_write		-	pseudo DMA write
+ *	generic_NCR5380_pwrite - pseudo DMA write
  *	@instance: adapter to read from
  *	@dst: buffer to read into
  *	@len: buffer length
@@ -670,7 +602,8 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
  *	controller
  */
 
-static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
+static inline int generic_NCR5380_pwrite(struct Scsi_Host *instance,
+                                         unsigned char *src, int len)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int blocks = len / 128;
@@ -738,10 +671,15 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
 	return 0;
 }
 
-static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
+static int generic_NCR5380_dma_xfer_len(struct Scsi_Host *instance,
+                                        struct scsi_cmnd *cmd)
 {
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int transfersize = cmd->transfersize;
 
+	if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
+		return 0;
+
 	/* Limit transfers to 32K, for xx400 & xx406
 	 * pseudoDMA that transfers in 128 bytes blocks.
 	 */
@@ -756,8 +694,6 @@ static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
 	return transfersize;
 }
 
-#endif /* PSEUDO_DMA */
-
 /*
  *	Include the NCR5380 core code that we build our driver around	
  */
@@ -773,7 +709,6 @@ static struct scsi_host_template driver_template = {
 	.queuecommand		= generic_NCR5380_queue_command,
 	.eh_abort_handler	= generic_NCR5380_abort,
 	.eh_bus_reset_handler	= generic_NCR5380_bus_reset,
-	.bios_param		= NCR5380_BIOSPARAM,
 	.can_queue		= 16,
 	.this_id		= 7,
 	.sg_tablesize		= SG_ALL,
diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 6f3d2ac4f185..595177428d76 100644
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -14,13 +14,6 @@
 #ifndef GENERIC_NCR5380_H
 #define GENERIC_NCR5380_H
 
-#ifdef CONFIG_SCSI_GENERIC_NCR53C400
-#define BIOSPARAM
-#define NCR5380_BIOSPARAM generic_NCR5380_biosparam
-#else
-#define NCR5380_BIOSPARAM NULL
-#endif
-
 #define __STRVAL(x) #x
 #define STRVAL(x) __STRVAL(x)
 
@@ -30,12 +23,6 @@
 #define NCR5380_map_type int
 #define NCR5380_map_name port
 
-#ifdef CONFIG_SCSI_GENERIC_NCR53C400
-#define NCR5380_region_size 16
-#else
-#define NCR5380_region_size 8
-#endif
-
 #define NCR5380_read(reg) \
 	inb(instance->io_port + (reg))
 #define NCR5380_write(reg, value) \
@@ -55,7 +42,7 @@
 #define NCR5380_map_name base
 #define NCR53C400_mem_base 0x3880
 #define NCR53C400_host_buffer 0x3900
-#define NCR5380_region_size 0x3a00
+#define NCR53C400_region_size 0x3a00
 
 #define NCR5380_read(reg) \
 	readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
@@ -66,6 +53,7 @@
 
 #define NCR5380_implementation_fields \
 	void __iomem *iomem; \
+	resource_size_t iomem_size; \
 	int c400_ctl_status; \
 	int c400_blk_cnt; \
 	int c400_host_buf;
@@ -73,16 +61,18 @@
 #endif
 
 #define NCR5380_dma_xfer_len(instance, cmd, phase) \
-        generic_NCR5380_dma_xfer_len(cmd)
+        generic_NCR5380_dma_xfer_len(instance, cmd)
+#define NCR5380_dma_recv_setup		generic_NCR5380_pread
+#define NCR5380_dma_send_setup		generic_NCR5380_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_intr generic_NCR5380_intr
 #define NCR5380_queue_command generic_NCR5380_queue_command
 #define NCR5380_abort generic_NCR5380_abort
 #define NCR5380_bus_reset generic_NCR5380_bus_reset
-#define NCR5380_pread generic_NCR5380_pread
-#define NCR5380_pwrite generic_NCR5380_pwrite
 #define NCR5380_info generic_NCR5380_info
-#define NCR5380_show_info generic_NCR5380_show_info
+
+#define NCR5380_io_delay(x)		udelay(x)
 
 #define BOARD_NCR5380	0
 #define BOARD_NCR53C400	1
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 29e89f340b64..d7cab724f203 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -23,7 +23,7 @@
 #include <scsi/sas_ata.h>
 #include <scsi/libsas.h>
 
-#define DRV_VERSION "v1.3"
+#define DRV_VERSION "v1.4"
 
 #define HISI_SAS_MAX_PHYS	9
 #define HISI_SAS_MAX_QUEUES	32
@@ -133,6 +133,9 @@ struct hisi_sas_hw {
 	int (*hw_init)(struct hisi_hba *hisi_hba);
 	void (*setup_itct)(struct hisi_hba *hisi_hba,
 			   struct hisi_sas_device *device);
+	int (*slot_index_alloc)(struct hisi_hba *hisi_hba, int *slot_idx,
+				struct domain_device *device);
+	struct hisi_sas_device *(*alloc_dev)(struct domain_device *device);
 	void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
 	int (*get_free_slot)(struct hisi_hba *hisi_hba, int *q, int *s);
 	void (*start_delivery)(struct hisi_hba *hisi_hba);
@@ -298,7 +301,7 @@ struct hisi_sas_command_table_stp {
 	u8	atapi_cdb[ATAPI_CDB_LEN];
 };
 
-#define HISI_SAS_SGE_PAGE_CNT SCSI_MAX_SG_SEGMENTS
+#define HISI_SAS_SGE_PAGE_CNT SG_CHUNK_SIZE
 struct hisi_sas_sge_page {
 	struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT];
 };
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 097ab4f27a6b..18dd5ea2c721 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -227,7 +227,11 @@ static int hisi_sas_task_prep(struct sas_task *task, struct hisi_hba *hisi_hba,
 	} else
 		n_elem = task->num_scatter;
 
-	rc = hisi_sas_slot_index_alloc(hisi_hba, &slot_idx);
+	if (hisi_hba->hw->slot_index_alloc)
+		rc = hisi_hba->hw->slot_index_alloc(hisi_hba, &slot_idx,
+						    device);
+	else
+		rc = hisi_sas_slot_index_alloc(hisi_hba, &slot_idx);
 	if (rc)
 		goto err_out;
 	rc = hisi_hba->hw->get_free_slot(hisi_hba, &dlvry_queue,
@@ -417,7 +421,10 @@ static int hisi_sas_dev_found(struct domain_device *device)
 	struct hisi_sas_device *sas_dev;
 	struct device *dev = &hisi_hba->pdev->dev;
 
-	sas_dev = hisi_sas_alloc_dev(device);
+	if (hisi_hba->hw->alloc_dev)
+		sas_dev = hisi_hba->hw->alloc_dev(device);
+	else
+		sas_dev = hisi_sas_alloc_dev(device);
 	if (!sas_dev) {
 		dev_err(dev, "fail alloc dev: max support %d devices\n",
 			HISI_SAS_MAX_DEVICES);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index b7337476454b..bbe98ecea0bc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -465,6 +465,62 @@ static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
 	return readl(regs);
 }
 
+/* This function needs to be protected from pre-emption. */
+static int
+slot_index_alloc_quirk_v2_hw(struct hisi_hba *hisi_hba, int *slot_idx,
+		       struct domain_device *device)
+{
+	unsigned int index = 0;
+	void *bitmap = hisi_hba->slot_index_tags;
+	int sata_dev = dev_is_sata(device);
+
+	while (1) {
+		index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
+					   index);
+		if (index >= hisi_hba->slot_index_count)
+			return -SAS_QUEUE_FULL;
+		/*
+		 * SAS IPTT bit0 should be 1
+		 */
+		if (sata_dev || (index & 1))
+			break;
+		index++;
+	}
+
+	set_bit(index, bitmap);
+	*slot_idx = index;
+	return 0;
+}
+
+static struct
+hisi_sas_device *alloc_dev_quirk_v2_hw(struct domain_device *device)
+{
+	struct hisi_hba *hisi_hba = device->port->ha->lldd_ha;
+	struct hisi_sas_device *sas_dev = NULL;
+	int i, sata_dev = dev_is_sata(device);
+
+	spin_lock(&hisi_hba->lock);
+	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+		/*
+		 * SATA device id bit0 should be 0
+		 */
+		if (sata_dev && (i & 1))
+			continue;
+		if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
+			hisi_hba->devices[i].device_id = i;
+			sas_dev = &hisi_hba->devices[i];
+			sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+			sas_dev->dev_type = device->dev_type;
+			sas_dev->hisi_hba = hisi_hba;
+			sas_dev->sas_device = device;
+			break;
+		}
+	}
+	spin_unlock(&hisi_hba->lock);
+
+	return sas_dev;
+}
+
 static void config_phy_opt_mode_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
 {
 	u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
@@ -544,7 +600,7 @@ static void setup_itct_v2_hw(struct hisi_hba *hisi_hba,
 	}
 
 	qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
-		(device->max_linkrate << ITCT_HDR_MCR_OFF) |
+		(device->linkrate << ITCT_HDR_MCR_OFF) |
 		(1 << ITCT_HDR_VLN_OFF) |
 		(port->id << ITCT_HDR_PORT_ID_OFF));
 	itct->qw0 = cpu_to_le64(qw0);
@@ -554,10 +610,11 @@ static void setup_itct_v2_hw(struct hisi_hba *hisi_hba,
 	itct->sas_addr = __swab64(itct->sas_addr);
 
 	/* qw2 */
-	itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_INLT_OFF) |
-				(0xff00ULL << ITCT_HDR_BITLT_OFF) |
-				(0xff00ULL << ITCT_HDR_MCTLT_OFF) |
-				(0xff00ULL << ITCT_HDR_RTOLT_OFF));
+	if (!dev_is_sata(device))
+		itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_INLT_OFF) |
+					(0x1ULL << ITCT_HDR_BITLT_OFF) |
+					(0x32ULL << ITCT_HDR_MCTLT_OFF) |
+					(0x1ULL << ITCT_HDR_RTOLT_OFF));
 }
 
 static void free_device_v2_hw(struct hisi_hba *hisi_hba,
@@ -715,7 +772,7 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
 	hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF);
 	hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1);
 	hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4);
-	hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x4E20);
+	hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x32);
 	hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1);
 	hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1);
 	hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1);
@@ -1993,22 +2050,23 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 	u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate;
 	irqreturn_t res = IRQ_HANDLED;
 	u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
-	int phy_no;
+	int phy_no, offset;
 
 	phy_no = sas_phy->id;
 	initial_fis = &hisi_hba->initial_fis[phy_no];
 	fis = &initial_fis->fis;
 
-	ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1);
-	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk | 1 << phy_no);
+	offset = 4 * (phy_no / 4);
+	ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1 + offset);
+	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset,
+			 ent_msk | 1 << ((phy_no % 4) * 8));
 
-	ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1);
-	ent_tmp = ent_int;
+	ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1 + offset);
+	ent_tmp = ent_int & (1 << (ENT_INT_SRC1_D2H_FIS_CH1_OFF *
+			     (phy_no % 4)));
 	ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4);
 	if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) {
 		dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no);
-		hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp);
-		hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk);
 		res = IRQ_NONE;
 		goto end;
 	}
@@ -2056,8 +2114,8 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 	queue_work(hisi_hba->wq, &phy->phyup_ws);
 
 end:
-	hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp);
-	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk);
+	hisi_sas_write32(hisi_hba, ENT_INT_SRC1 + offset, ent_tmp);
+	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset, ent_msk);
 
 	return res;
 }
@@ -2165,6 +2223,8 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
 static const struct hisi_sas_hw hisi_sas_v2_hw = {
 	.hw_init = hisi_sas_v2_init,
 	.setup_itct = setup_itct_v2_hw,
+	.slot_index_alloc = slot_index_alloc_quirk_v2_hw,
+	.alloc_dev = alloc_dev_quirk_v2_hw,
 	.sl_notify = sl_notify_v2_hw,
 	.get_wideport_bitmap = get_wideport_bitmap_v2_hw,
 	.free_device = free_device_v2_hw,
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 5be944c8b71c..ff25d2082139 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -60,7 +60,7 @@
  * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
  * with an optional trailing '-' followed by a byte value (0-255).
  */
-#define HPSA_DRIVER_VERSION "3.4.14-0"
+#define HPSA_DRIVER_VERSION "3.4.16-0"
 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
 #define HPSA "hpsa"
 
@@ -294,6 +294,9 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h);
 static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
 	struct ReportExtendedLUNdata *buf, int bufsize);
 static int hpsa_luns_changed(struct ctlr_info *h);
+static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c,
+			       struct hpsa_scsi_dev_t *dev,
+			       unsigned char *scsi3addr);
 
 static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
 {
@@ -728,6 +731,29 @@ static ssize_t unique_id_show(struct device *dev,
 			sn[12], sn[13], sn[14], sn[15]);
 }
 
+static ssize_t sas_address_show(struct device *dev,
+	      struct device_attribute *attr, char *buf)
+{
+	struct ctlr_info *h;
+	struct scsi_device *sdev;
+	struct hpsa_scsi_dev_t *hdev;
+	unsigned long flags;
+	u64 sas_address;
+
+	sdev = to_scsi_device(dev);
+	h = sdev_to_hba(sdev);
+	spin_lock_irqsave(&h->lock, flags);
+	hdev = sdev->hostdata;
+	if (!hdev || is_logical_device(hdev) || !hdev->expose_device) {
+		spin_unlock_irqrestore(&h->lock, flags);
+		return -ENODEV;
+	}
+	sas_address = hdev->sas_address;
+	spin_unlock_irqrestore(&h->lock, flags);
+
+	return snprintf(buf, PAGE_SIZE, "0x%016llx\n", sas_address);
+}
+
 static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
 	     struct device_attribute *attr, char *buf)
 {
@@ -840,6 +866,7 @@ static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
 static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
 static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL);
 static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
+static DEVICE_ATTR(sas_address, S_IRUGO, sas_address_show, NULL);
 static DEVICE_ATTR(hp_ssd_smart_path_enabled, S_IRUGO,
 			host_show_hp_ssd_smart_path_enabled, NULL);
 static DEVICE_ATTR(path_info, S_IRUGO, path_info_show, NULL);
@@ -865,6 +892,7 @@ static struct device_attribute *hpsa_sdev_attrs[] = {
 	&dev_attr_unique_id,
 	&dev_attr_hp_ssd_smart_path_enabled,
 	&dev_attr_path_info,
+	&dev_attr_sas_address,
 	NULL,
 };
 
@@ -1720,6 +1748,51 @@ static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
 	return rc;
 }
 
+static int hpsa_find_outstanding_commands_for_dev(struct ctlr_info *h,
+						struct hpsa_scsi_dev_t *dev)
+{
+	int i;
+	int count = 0;
+
+	for (i = 0; i < h->nr_cmds; i++) {
+		struct CommandList *c = h->cmd_pool + i;
+		int refcount = atomic_inc_return(&c->refcount);
+
+		if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev,
+				dev->scsi3addr)) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&h->lock, flags);	/* Implied MB */
+			if (!hpsa_is_cmd_idle(c))
+				++count;
+			spin_unlock_irqrestore(&h->lock, flags);
+		}
+
+		cmd_free(h, c);
+	}
+
+	return count;
+}
+
+static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h,
+						struct hpsa_scsi_dev_t *device)
+{
+	int cmds = 0;
+	int waits = 0;
+
+	while (1) {
+		cmds = hpsa_find_outstanding_commands_for_dev(h, device);
+		if (cmds == 0)
+			break;
+		if (++waits > 20)
+			break;
+		dev_warn(&h->pdev->dev,
+			"%s: removing device with %d outstanding commands!\n",
+			__func__, cmds);
+		msleep(1000);
+	}
+}
+
 static void hpsa_remove_device(struct ctlr_info *h,
 			struct hpsa_scsi_dev_t *device)
 {
@@ -1743,8 +1816,13 @@ static void hpsa_remove_device(struct ctlr_info *h,
 			hpsa_show_dev_msg(KERN_WARNING, h, device,
 					"didn't find device for removal.");
 		}
-	} else /* HBA */
+	} else { /* HBA */
+
+		device->removed = 1;
+		hpsa_wait_for_outstanding_commands_for_dev(h, device);
+
 		hpsa_remove_sas_device(device);
+	}
 }
 
 static void adjust_hpsa_scsi_table(struct ctlr_info *h,
@@ -2146,7 +2224,8 @@ static void hpsa_unmap_sg_chain_block(struct ctlr_info *h,
 static int handle_ioaccel_mode2_error(struct ctlr_info *h,
 					struct CommandList *c,
 					struct scsi_cmnd *cmd,
-					struct io_accel2_cmd *c2)
+					struct io_accel2_cmd *c2,
+					struct hpsa_scsi_dev_t *dev)
 {
 	int data_len;
 	int retry = 0;
@@ -2210,8 +2289,27 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
 		case IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE:
 		case IOACCEL2_STATUS_SR_INVALID_DEVICE:
 		case IOACCEL2_STATUS_SR_IOACCEL_DISABLED:
-			/* We will get an event from ctlr to trigger rescan */
-			retry = 1;
+			/*
+			 * Did an HBA disk disappear? We will eventually
+			 * get a state change event from the controller but
+			 * in the meantime, we need to tell the OS that the
+			 * HBA disk is no longer there and stop I/O
+			 * from going down. This allows the potential re-insert
+			 * of the disk to get the same device node.
+			 */
+			if (dev->physical_device && dev->expose_device) {
+				cmd->result = DID_NO_CONNECT << 16;
+				dev->removed = 1;
+				h->drv_req_rescan = 1;
+				dev_warn(&h->pdev->dev,
+					"%s: device is gone!\n", __func__);
+			} else
+				/*
+				 * Retry by sending down the RAID path.
+				 * We will get an event from ctlr to
+				 * trigger rescan regardless.
+				 */
+				retry = 1;
 			break;
 		default:
 			retry = 1;
@@ -2335,13 +2433,15 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 		c2->error_data.serv_response ==
 			IOACCEL2_SERV_RESPONSE_FAILURE) {
 		if (c2->error_data.status ==
-			IOACCEL2_STATUS_SR_IOACCEL_DISABLED)
+			IOACCEL2_STATUS_SR_IOACCEL_DISABLED) {
 			dev->offload_enabled = 0;
+			dev->offload_to_be_enabled = 0;
+		}
 
 		return hpsa_retry_cmd(h, c);
 	}
 
-	if (handle_ioaccel_mode2_error(h, c, cmd, c2))
+	if (handle_ioaccel_mode2_error(h, c, cmd, c2, dev))
 		return hpsa_retry_cmd(h, c);
 
 	return hpsa_cmd_free_and_done(h, c, cmd);
@@ -2806,7 +2906,7 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
 		goto out;
 	}
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-					PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+					PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -2832,7 +2932,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
 	/* fill_cmd can't fail here, no data buffer to map. */
 	(void) fill_cmd(c, reset_type, h, NULL, 0, 0,
 			scsi3addr, TYPE_MSG);
-	rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
+	rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
 	if (rc) {
 		dev_warn(&h->pdev->dev, "Failed to send reset command\n");
 		goto out;
@@ -3080,7 +3180,7 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
 		return -1;
 	}
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-					PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+					PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3123,7 +3223,7 @@ static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h,
 	c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-				PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+				PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3151,7 +3251,7 @@ static int hpsa_bmic_id_controller(struct ctlr_info *h,
 		goto out;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+		PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3182,7 +3282,7 @@ static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
 	c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
 
 	hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
-						NO_TIMEOUT);
+						DEFAULT_TIMEOUT);
 	ei = c->err_info;
 	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
 		hpsa_scsi_interpret_error(h, c);
@@ -3250,7 +3350,7 @@ static void hpsa_get_enclosure_info(struct ctlr_info *h,
 		c->Request.CDB[5] = 0;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
-						NO_TIMEOUT);
+						DEFAULT_TIMEOUT);
 	if (rc)
 		goto out;
 
@@ -3462,7 +3562,7 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
 	if (extended_response)
 		c->Request.CDB[1] = extended_response;
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-					PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+					PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3569,7 +3669,8 @@ static int hpsa_volume_offline(struct ctlr_info *h,
 	c = cmd_alloc(h);
 
 	(void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
-	rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+	rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
+					DEFAULT_TIMEOUT);
 	if (rc) {
 		cmd_free(h, c);
 		return 0;
@@ -3644,7 +3745,8 @@ static int hpsa_device_supports_aborts(struct ctlr_info *h,
 	c = cmd_alloc(h);
 
 	(void) fill_cmd(c, HPSA_ABORT_MSG, h, &tag, 0, 0, scsi3addr, TYPE_MSG);
-	(void) hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+	(void) hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
+					DEFAULT_TIMEOUT);
 	/* no unmap needed here because no data xfer. */
 	ei = c->err_info;
 	switch (ei->CommandStatus) {
@@ -5234,6 +5336,12 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 
 	dev = cmd->device->hostdata;
 	if (!dev) {
+		cmd->result = NOT_READY << 16; /* host byte */
+		cmd->scsi_done(cmd);
+		return 0;
+	}
+
+	if (dev->removed) {
 		cmd->result = DID_NO_CONNECT << 16;
 		cmd->scsi_done(cmd);
 		return 0;
@@ -5414,7 +5522,7 @@ static int hpsa_send_test_unit_ready(struct ctlr_info *h,
 	/* Send the Test Unit Ready, fill_cmd can't fail, no mapping */
 	(void) fill_cmd(c, TEST_UNIT_READY, h,
 			NULL, 0, 0, lunaddr, TYPE_CMD);
-	rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
+	rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
 	if (rc)
 		return rc;
 	/* no unmap needed here because no data xfer. */
@@ -5638,7 +5746,7 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
 		0, 0, scsi3addr, TYPE_MSG);
 	if (h->needs_abort_tags_swizzled)
 		swizzle_abort_tag(&c->Request.CDB[4]);
-	(void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
+	(void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
 	hpsa_get_tag(h, abort, &taglower, &tagupper);
 	dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd(abort) completed.\n",
 		__func__, tagupper, taglower);
@@ -5803,7 +5911,7 @@ static int hpsa_send_abort_ioaccel2(struct ctlr_info *h,
 	c = cmd_alloc(h);
 	setup_ioaccel2_abort_cmd(c, h, abort, reply_queue);
 	c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
-	(void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
+	(void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
 	hpsa_get_tag(h, abort, &taglower, &tagupper);
 	dev_dbg(&h->pdev->dev,
 		"%s: Tag:0x%08x:%08x: do_simple_cmd(ioaccel2 abort) completed.\n",
@@ -6348,7 +6456,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		c->SG[0].Len = cpu_to_le32(iocommand.buf_size);
 		c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */
 	}
-	rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+	rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
+					DEFAULT_TIMEOUT);
 	if (iocommand.buf_size > 0)
 		hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
 	check_ioctl_unit_attention(h, c);
@@ -6480,7 +6589,8 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		}
 		c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST);
 	}
-	status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+	status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
+						DEFAULT_TIMEOUT);
 	if (sg_used)
 		hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
 	check_ioctl_unit_attention(h, c);
@@ -8254,8 +8364,10 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
 			event_type = "configuration change";
 		/* Stop sending new RAID offload reqs via the IO accelerator */
 		scsi_block_requests(h->scsi_host);
-		for (i = 0; i < h->ndevices; i++)
+		for (i = 0; i < h->ndevices; i++) {
 			h->dev[i]->offload_enabled = 0;
+			h->dev[i]->offload_to_be_enabled = 0;
+		}
 		hpsa_drain_accel_commands(h);
 		/* Set 'accelerator path config change' bit */
 		dev_warn(&h->pdev->dev,
@@ -8541,11 +8653,6 @@ reinit_after_soft_reset:
 	if (rc)
 		goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
 
-	/* hook into SCSI subsystem */
-	rc = hpsa_scsi_add_host(h);
-	if (rc)
-		goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
-
 	/* create the resubmit workqueue */
 	h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
 	if (!h->rescan_ctlr_wq) {
@@ -8642,6 +8749,11 @@ reinit_after_soft_reset:
 		dev_info(&h->pdev->dev,
 			"Can't track change to report lun data\n");
 
+	/* hook into SCSI subsystem */
+	rc = hpsa_scsi_add_host(h);
+	if (rc)
+		goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
+
 	/* Monitor the controller for firmware lockups */
 	h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
 	INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
@@ -8703,7 +8815,7 @@ static void hpsa_flush_cache(struct ctlr_info *h)
 		goto out;
 	}
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-					PCI_DMA_TODEVICE, NO_TIMEOUT);
+					PCI_DMA_TODEVICE, DEFAULT_TIMEOUT);
 	if (rc)
 		goto out;
 	if (c->err_info->CommandStatus != 0)
@@ -8742,7 +8854,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 		goto errout;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+		PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
 	if ((rc != 0) || (c->err_info->CommandStatus != 0))
 		goto errout;
 
@@ -8754,7 +8866,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 		goto errout;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_TODEVICE, NO_TIMEOUT);
+		PCI_DMA_TODEVICE, DEFAULT_TIMEOUT);
 	if ((rc != 0)  || (c->err_info->CommandStatus != 0))
 		goto errout;
 
@@ -8764,7 +8876,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 		goto errout;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+		PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
 	if ((rc != 0)  || (c->err_info->CommandStatus != 0))
 		goto errout;
 
@@ -9602,6 +9714,7 @@ hpsa_sas_get_linkerrors(struct sas_phy *phy)
 static int
 hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 {
+	*identifier = 0;
 	return 0;
 }
 
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index d06bb7417e36..a1487e67f7a1 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -63,6 +63,7 @@ struct hpsa_scsi_dev_t {
 	unsigned char scsi3addr[8];	/* as presented to the HW */
 	u8 physical_device : 1;
 	u8 expose_device;
+	u8 removed : 1;			/* device is marked for death */
 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
 	unsigned char device_id[16];    /* from inquiry pg. 0x83 */
 	u64 sas_address;
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 6bffd91b973a..c051694bfcb0 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2127,7 +2127,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	struct iscsi_conn *conn;
 	struct iscsi_task *task;
 	struct iscsi_tm *hdr;
-	int rc, age;
+	int age;
 
 	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
@@ -2188,10 +2188,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	hdr = &conn->tmhdr;
 	iscsi_prep_abort_task_pdu(task, hdr);
 
-	if (iscsi_exec_task_mgmt_fn(conn, hdr, age, session->abort_timeout)) {
-		rc = FAILED;
+	if (iscsi_exec_task_mgmt_fn(conn, hdr, age, session->abort_timeout))
 		goto failed;
-	}
 
 	switch (conn->tmf_state) {
 	case TMF_SUCCESS:
@@ -2423,7 +2421,7 @@ static void iscsi_prep_tgt_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr)
  *
  * This will attempt to send a warm target reset.
  */
-int iscsi_eh_target_reset(struct scsi_cmnd *sc)
+static int iscsi_eh_target_reset(struct scsi_cmnd *sc)
 {
 	struct iscsi_cls_session *cls_session;
 	struct iscsi_session *session;
@@ -2495,7 +2493,6 @@ done:
 	mutex_unlock(&session->eh_mutex);
 	return rc;
 }
-EXPORT_SYMBOL_GPL(iscsi_eh_target_reset);
 
 /**
  * iscsi_eh_recover_target - reset target and possibly the session
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 90a3ca5a4dbd..d5bd420595c1 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -694,6 +694,7 @@ struct lpfc_hba {
 	uint8_t  wwnn[8];
 	uint8_t  wwpn[8];
 	uint32_t RandomData[7];
+	uint32_t fcp_embed_io;
 
 	/* HBA Config Parameters */
 	uint32_t cfg_ack0;
@@ -757,7 +758,6 @@ struct lpfc_hba {
 	uint32_t cfg_fdmi_on;
 #define LPFC_FDMI_NO_SUPPORT	0	/* FDMI not supported */
 #define LPFC_FDMI_SUPPORT	1	/* FDMI supported? */
-#define LPFC_FDMI_SMART_SAN	2	/* SmartSAN supported */
 	uint32_t cfg_enable_SmartSAN;
 	lpfc_vpd_t vpd;		/* vital product data */
 
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 343ae9482891..cfec2eca4dd3 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -4584,15 +4584,14 @@ LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality");
 # lpfc_fdmi_on: Controls FDMI support.
 #       0       No FDMI support (default)
 #       1       Traditional FDMI support
-#       2       Smart SAN support
-# If lpfc_enable_SmartSAN is set 1, the driver sets lpfc_fdmi_on to value 2
-# overwriting the current value.  If lpfc_enable_SmartSAN is set 0, the
-# driver uses the current value of lpfc_fdmi_on provided it has value 0 or 1.
-# A value of 2 with lpfc_enable_SmartSAN set to 0 causes the driver to
-# set lpfc_fdmi_on back to 1.
-# Value range [0,2]. Default value is 0.
+# Traditional FDMI support means the driver will assume FDMI-2 support;
+# however, if that fails, it will fallback to FDMI-1.
+# If lpfc_enable_SmartSAN is set to 1, the driver ignores lpfc_fdmi_on.
+# If lpfc_enable_SmartSAN is set 0, the driver uses the current value of
+# lpfc_fdmi_on.
+# Value range [0,1]. Default value is 0.
 */
-LPFC_ATTR_R(fdmi_on, 0, 0, 2, "Enable FDMI support");
+LPFC_ATTR_R(fdmi_on, 0, 0, 1, "Enable FDMI support");
 
 /*
 # Specifies the maximum number of ELS cmds we can have outstanding (for
@@ -5150,7 +5149,6 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport)
 	sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr);
 }
 
-
 /*
  * Dynamic FC Host Attributes Support
  */
@@ -5857,14 +5855,6 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	else
 		phba->cfg_poll = lpfc_poll;
 
-	/* Ensure fdmi_on and enable_SmartSAN don't conflict */
-	if (phba->cfg_enable_SmartSAN) {
-		phba->cfg_fdmi_on = LPFC_FDMI_SMART_SAN;
-	} else {
-		if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN)
-			phba->cfg_fdmi_on = LPFC_FDMI_SUPPORT;
-	}
-
 	phba->cfg_soft_wwnn = 0L;
 	phba->cfg_soft_wwpn = 0L;
 	lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 79e261d2a0c8..a38816e96654 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -2322,7 +2322,7 @@ lpfc_fdmi_smart_attr_version(struct lpfc_vport *vport,
 	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
 	memset(ae, 0, 256);
 
-	strncpy(ae->un.AttrString, "Smart SAN Version 1.0",
+	strncpy(ae->un.AttrString, "Smart SAN Version 2.0",
 		sizeof(ae->un.AttrString));
 	len = strnlen(ae->un.AttrString,
 			  sizeof(ae->un.AttrString));
@@ -2397,7 +2397,7 @@ lpfc_fdmi_smart_attr_security(struct lpfc_vport *vport,
 	uint32_t size;
 
 	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	ae->un.AttrInt =  cpu_to_be32(0);
+	ae->un.AttrInt =  cpu_to_be32(1);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
 	ad->AttrType = cpu_to_be16(RPRT_SMART_SECURITY);
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7f5abb8f52bc..0498f5760d2b 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -690,16 +690,17 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	fabric_param_changed = lpfc_check_clean_addr_bit(vport, sp);
 	if (fabric_param_changed) {
 		/* Reset FDMI attribute masks based on config parameter */
-		if (phba->cfg_fdmi_on == LPFC_FDMI_NO_SUPPORT) {
-			vport->fdmi_hba_mask = 0;
-			vport->fdmi_port_mask = 0;
-		} else {
+		if (phba->cfg_enable_SmartSAN ||
+		    (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
 			/* Setup appropriate attribute masks */
 			vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
-			if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN)
+			if (phba->cfg_enable_SmartSAN)
 				vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
 			else
 				vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
+		} else {
+			vport->fdmi_hba_mask = 0;
+			vport->fdmi_port_mask = 0;
 		}
 
 	}
@@ -1069,7 +1070,10 @@ stop_rr_fcf_flogi:
 					lpfc_sli4_unreg_all_rpis(vport);
 				}
 			}
-			lpfc_issue_reg_vfi(vport);
+
+			/* Do not register VFI if the driver aborted FLOGI */
+			if (!lpfc_error_lost_link(irsp))
+				lpfc_issue_reg_vfi(vport);
 			lpfc_nlp_put(ndlp);
 			goto out;
 		}
@@ -4705,6 +4709,144 @@ lpfc_rdp_res_link_error(struct fc_rdp_link_error_status_desc *desc,
 	desc->length = cpu_to_be32(sizeof(desc->info));
 }
 
+void
+lpfc_rdp_res_bbc_desc(struct fc_rdp_bbc_desc *desc, READ_LNK_VAR *stat,
+		      struct lpfc_vport *vport)
+{
+	desc->tag = cpu_to_be32(RDP_BBC_DESC_TAG);
+
+	desc->bbc_info.port_bbc = cpu_to_be32(
+				vport->fc_sparam.cmn.bbCreditMsb |
+				vport->fc_sparam.cmn.bbCreditlsb << 8);
+	if (vport->phba->fc_topology != LPFC_TOPOLOGY_LOOP)
+		desc->bbc_info.attached_port_bbc = cpu_to_be32(
+				vport->phba->fc_fabparam.cmn.bbCreditMsb |
+				vport->phba->fc_fabparam.cmn.bbCreditlsb << 8);
+	else
+		desc->bbc_info.attached_port_bbc = 0;
+
+	desc->bbc_info.rtt = 0;
+	desc->length = cpu_to_be32(sizeof(desc->bbc_info));
+}
+
+void
+lpfc_rdp_res_oed_temp_desc(struct fc_rdp_oed_sfp_desc *desc, uint8_t *page_a2)
+{
+	uint32_t flags;
+
+	desc->tag = cpu_to_be32(RDP_OED_DESC_TAG);
+
+	desc->oed_info.hi_alarm =
+			cpu_to_be16(page_a2[SSF_TEMP_HIGH_ALARM]);
+	desc->oed_info.lo_alarm = cpu_to_be16(page_a2[SSF_TEMP_LOW_ALARM]);
+	desc->oed_info.hi_warning =
+			cpu_to_be16(page_a2[SSF_TEMP_HIGH_WARNING]);
+	desc->oed_info.lo_warning =
+			cpu_to_be16(page_a2[SSF_TEMP_LOW_WARNING]);
+	flags = 0xf; /* All four are valid */
+	flags |= ((0xf & RDP_OED_TEMPERATURE) << RDP_OED_TYPE_SHIFT);
+	desc->oed_info.function_flags = cpu_to_be32(flags);
+	desc->length = cpu_to_be32(sizeof(desc->oed_info));
+}
+
+void
+lpfc_rdp_res_oed_voltage_desc(struct fc_rdp_oed_sfp_desc *desc,
+			      uint8_t *page_a2)
+{
+	uint32_t flags;
+
+	desc->tag = cpu_to_be32(RDP_OED_DESC_TAG);
+
+	desc->oed_info.hi_alarm =
+			cpu_to_be16(page_a2[SSF_VOLTAGE_HIGH_ALARM]);
+	desc->oed_info.lo_alarm = cpu_to_be16(page_a2[SSF_VOLTAGE_LOW_ALARM]);
+	desc->oed_info.hi_warning =
+			cpu_to_be16(page_a2[SSF_VOLTAGE_HIGH_WARNING]);
+	desc->oed_info.lo_warning =
+			cpu_to_be16(page_a2[SSF_VOLTAGE_LOW_WARNING]);
+	flags = 0xf; /* All four are valid */
+	flags |= ((0xf & RDP_OED_VOLTAGE) << RDP_OED_TYPE_SHIFT);
+	desc->oed_info.function_flags = cpu_to_be32(flags);
+	desc->length = cpu_to_be32(sizeof(desc->oed_info));
+}
+
+void
+lpfc_rdp_res_oed_txbias_desc(struct fc_rdp_oed_sfp_desc *desc,
+			     uint8_t *page_a2)
+{
+	uint32_t flags;
+
+	desc->tag = cpu_to_be32(RDP_OED_DESC_TAG);
+
+	desc->oed_info.hi_alarm =
+			cpu_to_be16(page_a2[SSF_BIAS_HIGH_ALARM]);
+	desc->oed_info.lo_alarm = cpu_to_be16(page_a2[SSF_BIAS_LOW_ALARM]);
+	desc->oed_info.hi_warning =
+			cpu_to_be16(page_a2[SSF_BIAS_HIGH_WARNING]);
+	desc->oed_info.lo_warning =
+			cpu_to_be16(page_a2[SSF_BIAS_LOW_WARNING]);
+	flags = 0xf; /* All four are valid */
+	flags |= ((0xf & RDP_OED_TXBIAS) << RDP_OED_TYPE_SHIFT);
+	desc->oed_info.function_flags = cpu_to_be32(flags);
+	desc->length = cpu_to_be32(sizeof(desc->oed_info));
+}
+
+void
+lpfc_rdp_res_oed_txpower_desc(struct fc_rdp_oed_sfp_desc *desc,
+			      uint8_t *page_a2)
+{
+	uint32_t flags;
+
+	desc->tag = cpu_to_be32(RDP_OED_DESC_TAG);
+
+	desc->oed_info.hi_alarm =
+			cpu_to_be16(page_a2[SSF_TXPOWER_HIGH_ALARM]);
+	desc->oed_info.lo_alarm = cpu_to_be16(page_a2[SSF_TXPOWER_LOW_ALARM]);
+	desc->oed_info.hi_warning =
+			cpu_to_be16(page_a2[SSF_TXPOWER_HIGH_WARNING]);
+	desc->oed_info.lo_warning =
+			cpu_to_be16(page_a2[SSF_TXPOWER_LOW_WARNING]);
+	flags = 0xf; /* All four are valid */
+	flags |= ((0xf & RDP_OED_TXPOWER) << RDP_OED_TYPE_SHIFT);
+	desc->oed_info.function_flags = cpu_to_be32(flags);
+	desc->length = cpu_to_be32(sizeof(desc->oed_info));
+}
+
+
+void
+lpfc_rdp_res_oed_rxpower_desc(struct fc_rdp_oed_sfp_desc *desc,
+			      uint8_t *page_a2)
+{
+	uint32_t flags;
+
+	desc->tag = cpu_to_be32(RDP_OED_DESC_TAG);
+
+	desc->oed_info.hi_alarm =
+			cpu_to_be16(page_a2[SSF_RXPOWER_HIGH_ALARM]);
+	desc->oed_info.lo_alarm = cpu_to_be16(page_a2[SSF_RXPOWER_LOW_ALARM]);
+	desc->oed_info.hi_warning =
+			cpu_to_be16(page_a2[SSF_RXPOWER_HIGH_WARNING]);
+	desc->oed_info.lo_warning =
+			cpu_to_be16(page_a2[SSF_RXPOWER_LOW_WARNING]);
+	flags = 0xf; /* All four are valid */
+	flags |= ((0xf & RDP_OED_RXPOWER) << RDP_OED_TYPE_SHIFT);
+	desc->oed_info.function_flags = cpu_to_be32(flags);
+	desc->length = cpu_to_be32(sizeof(desc->oed_info));
+}
+
+void
+lpfc_rdp_res_opd_desc(struct fc_rdp_opd_sfp_desc *desc,
+		      uint8_t *page_a0, struct lpfc_vport *vport)
+{
+	desc->tag = cpu_to_be32(RDP_OPD_DESC_TAG);
+	memcpy(desc->opd_info.vendor_name, &page_a0[SSF_VENDOR_NAME], 16);
+	memcpy(desc->opd_info.model_number, &page_a0[SSF_VENDOR_PN], 16);
+	memcpy(desc->opd_info.serial_number, &page_a0[SSF_VENDOR_SN], 16);
+	memcpy(desc->opd_info.revision, &page_a0[SSF_VENDOR_REV], 2);
+	memcpy(desc->opd_info.date, &page_a0[SSF_DATE_CODE], 8);
+	desc->length = cpu_to_be32(sizeof(desc->opd_info));
+}
+
 int
 lpfc_rdp_res_fec_desc(struct fc_fec_rdp_desc *desc, READ_LNK_VAR *stat)
 {
@@ -4776,6 +4918,8 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
 
 	if (rdp_cap == 0)
 		rdp_cap = RDP_CAP_UNKNOWN;
+	if (phba->cfg_link_speed != LPFC_USER_LINK_SPEED_AUTO)
+		rdp_cap |= RDP_CAP_USER_CONFIGURED;
 
 	desc->info.port_speed.capabilities = cpu_to_be16(rdp_cap);
 	desc->length = cpu_to_be32(sizeof(desc->info));
@@ -4875,6 +5019,19 @@ lpfc_els_rdp_cmpl(struct lpfc_hba *phba, struct lpfc_rdp_context *rdp_context,
 	lpfc_rdp_res_diag_port_names(&rdp_res->diag_port_names_desc, phba);
 	lpfc_rdp_res_attach_port_names(&rdp_res->attached_port_names_desc,
 			vport, ndlp);
+	lpfc_rdp_res_bbc_desc(&rdp_res->bbc_desc, &rdp_context->link_stat,
+			      vport);
+	lpfc_rdp_res_oed_temp_desc(&rdp_res->oed_temp_desc,
+				   rdp_context->page_a2);
+	lpfc_rdp_res_oed_voltage_desc(&rdp_res->oed_voltage_desc,
+				      rdp_context->page_a2);
+	lpfc_rdp_res_oed_txbias_desc(&rdp_res->oed_txbias_desc,
+				     rdp_context->page_a2);
+	lpfc_rdp_res_oed_txpower_desc(&rdp_res->oed_txpower_desc,
+				      rdp_context->page_a2);
+	lpfc_rdp_res_oed_rxpower_desc(&rdp_res->oed_rxpower_desc,
+				      rdp_context->page_a2);
+	lpfc_rdp_res_opd_desc(&rdp_res->opd_desc, rdp_context->page_a0, vport);
 	fec_size = lpfc_rdp_res_fec_desc(&rdp_res->fec_desc,
 			&rdp_context->link_stat);
 	rdp_res->length = cpu_to_be32(fec_size + RDP_DESC_PAYLOAD_SIZE);
@@ -7849,8 +8006,9 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 		return;
 	}
 
-	if ((phba->cfg_fdmi_on > LPFC_FDMI_NO_SUPPORT) &&
-	    (vport->load_flag & FC_ALLOW_FDMI))
+	if ((phba->cfg_enable_SmartSAN ||
+	     (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) &&
+	     (vport->load_flag & FC_ALLOW_FDMI))
 		lpfc_start_fdmi(vport);
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 25b5dcd1a5c8..ed223937798a 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -4545,7 +4545,8 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 				    (!(vport->load_flag & FC_UNLOADING)) &&
 				    (bf_get(lpfc_sli_intf_if_type,
 				     &phba->sli4_hba.sli_intf) ==
-				      LPFC_SLI_INTF_IF_TYPE_2)) {
+				      LPFC_SLI_INTF_IF_TYPE_2) &&
+				    (atomic_read(&ndlp->kref.refcount) > 0)) {
 					mbox->context1 = lpfc_nlp_get(ndlp);
 					mbox->mbox_cmpl =
 						lpfc_sli4_unreg_rpi_cmpl_clr;
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index dd20412c7e4c..39f0fd000d2c 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -1134,9 +1134,10 @@ struct fc_rdp_link_error_status_desc {
 #define RDP_PS_16GB            0x0400
 #define RDP_PS_32GB            0x0200
 
-#define RDP_CAP_UNKNOWN        0x0001
-#define RDP_PS_UNKNOWN         0x0002
-#define RDP_PS_NOT_ESTABLISHED 0x0001
+#define RDP_CAP_USER_CONFIGURED 0x0002
+#define RDP_CAP_UNKNOWN         0x0001
+#define RDP_PS_UNKNOWN          0x0002
+#define RDP_PS_NOT_ESTABLISHED  0x0001
 
 struct fc_rdp_port_speed {
 	uint16_t   capabilities;
@@ -1192,6 +1193,58 @@ struct fc_rdp_sfp_desc {
 	struct fc_rdp_sfp_info sfp_info;
 };
 
+/* Buffer Credit Descriptor */
+struct fc_rdp_bbc_info {
+	uint32_t              port_bbc; /* FC_Port buffer-to-buffer credit */
+	uint32_t              attached_port_bbc;
+	uint32_t              rtt;      /* Round trip time */
+};
+#define RDP_BBC_DESC_TAG  0x00010006
+struct fc_rdp_bbc_desc {
+	uint32_t              tag;
+	uint32_t              length;
+	struct fc_rdp_bbc_info  bbc_info;
+};
+
+#define RDP_OED_TEMPERATURE  0x1
+#define RDP_OED_VOLTAGE      0x2
+#define RDP_OED_TXBIAS       0x3
+#define RDP_OED_TXPOWER      0x4
+#define RDP_OED_RXPOWER      0x5
+
+#define RDP_OED_TYPE_SHIFT   28
+/* Optical Element Data descriptor */
+struct fc_rdp_oed_info {
+	uint16_t            hi_alarm;
+	uint16_t            lo_alarm;
+	uint16_t            hi_warning;
+	uint16_t            lo_warning;
+	uint32_t            function_flags;
+};
+#define RDP_OED_DESC_TAG  0x00010007
+struct fc_rdp_oed_sfp_desc {
+	uint32_t             tag;
+	uint32_t             length;
+	struct fc_rdp_oed_info oed_info;
+};
+
+/* Optical Product Data descriptor */
+struct fc_rdp_opd_sfp_info {
+	uint8_t            vendor_name[16];
+	uint8_t            model_number[16];
+	uint8_t            serial_number[16];
+	uint8_t            reserved[2];
+	uint8_t            revision[2];
+	uint8_t            date[8];
+};
+
+#define RDP_OPD_DESC_TAG  0x00010008
+struct fc_rdp_opd_sfp_desc {
+	uint32_t             tag;
+	uint32_t             length;
+	struct fc_rdp_opd_sfp_info opd_info;
+};
+
 struct fc_rdp_req_frame {
 	uint32_t         rdp_command;           /* ELS command opcode (0x18)*/
 	uint32_t         rdp_des_length;        /* RDP Payload Word 1 */
@@ -1208,7 +1261,14 @@ struct fc_rdp_res_frame {
 	struct fc_rdp_link_error_status_desc link_error_desc; /* Word 13-21 */
 	struct fc_rdp_port_name_desc diag_port_names_desc;    /* Word 22-27 */
 	struct fc_rdp_port_name_desc attached_port_names_desc;/* Word 28-33 */
-	struct fc_fec_rdp_desc fec_desc;	      /* FC Word 34 - 37 */
+	struct fc_rdp_bbc_desc bbc_desc;                      /* FC Word 34-38*/
+	struct fc_rdp_oed_sfp_desc oed_temp_desc;             /* FC Word 39-43*/
+	struct fc_rdp_oed_sfp_desc oed_voltage_desc;          /* FC word 44-48*/
+	struct fc_rdp_oed_sfp_desc oed_txbias_desc;           /* FC word 49-53*/
+	struct fc_rdp_oed_sfp_desc oed_txpower_desc;          /* FC word 54-58*/
+	struct fc_rdp_oed_sfp_desc oed_rxpower_desc;          /* FC word 59-63*/
+	struct fc_rdp_opd_sfp_desc opd_desc;                  /* FC word 64-80*/
+	struct fc_fec_rdp_desc fec_desc;                      /* FC word 81-84*/
 };
 
 
@@ -1216,7 +1276,10 @@ struct fc_rdp_res_frame {
 				+ sizeof(struct fc_rdp_sfp_desc) \
 				+ sizeof(struct fc_rdp_port_speed_desc) \
 				+ sizeof(struct fc_rdp_link_error_status_desc) \
-				+ (sizeof(struct fc_rdp_port_name_desc) * 2))
+				+ (sizeof(struct fc_rdp_port_name_desc) * 2) \
+				+ sizeof(struct fc_rdp_bbc_desc) \
+				+ (sizeof(struct fc_rdp_oed_sfp_desc) * 5) \
+				+ sizeof(struct fc_rdp_opd_sfp_desc))
 
 
 /******** FDMI ********/
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 608f9415fb08..0c7070bf2813 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2009-2015 Emulex.  All rights reserved.                *
+ * Copyright (C) 2009-2016 Emulex.  All rights reserved.                *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -2557,7 +2557,26 @@ struct lpfc_mbx_memory_dump_type3 {
 
 /* SFF-8472 Table 3.1a Diagnostics: Data Fields Address/Page A2 */
 
-#define SSF_AW_THRESHOLDS		0
+#define SSF_TEMP_HIGH_ALARM		0
+#define SSF_TEMP_LOW_ALARM		2
+#define SSF_TEMP_HIGH_WARNING		4
+#define SSF_TEMP_LOW_WARNING		6
+#define SSF_VOLTAGE_HIGH_ALARM		8
+#define SSF_VOLTAGE_LOW_ALARM		10
+#define SSF_VOLTAGE_HIGH_WARNING	12
+#define SSF_VOLTAGE_LOW_WARNING		14
+#define SSF_BIAS_HIGH_ALARM		16
+#define SSF_BIAS_LOW_ALARM		18
+#define SSF_BIAS_HIGH_WARNING		20
+#define SSF_BIAS_LOW_WARNING		22
+#define SSF_TXPOWER_HIGH_ALARM		24
+#define SSF_TXPOWER_LOW_ALARM		26
+#define SSF_TXPOWER_HIGH_WARNING	28
+#define SSF_TXPOWER_LOW_WARNING		30
+#define SSF_RXPOWER_HIGH_ALARM		32
+#define SSF_RXPOWER_LOW_ALARM		34
+#define SSF_RXPOWER_HIGH_WARNING	36
+#define SSF_RXPOWER_LOW_WARNING		38
 #define SSF_EXT_CAL_CONSTANTS		56
 #define SSF_CC_DMI			95
 #define SFF_TEMPERATURE_B1		96
@@ -2865,6 +2884,9 @@ struct lpfc_sli4_parameters {
 	uint32_t word17;
 	uint32_t word18;
 	uint32_t word19;
+#define cfg_ext_embed_cb_SHIFT			0
+#define cfg_ext_embed_cb_MASK			0x00000001
+#define cfg_ext_embed_cb_WORD			word19
 };
 
 struct lpfc_mbx_get_sli4_parameters {
@@ -3919,6 +3941,9 @@ union lpfc_wqe {
 union lpfc_wqe128 {
 	uint32_t words[32];
 	struct lpfc_wqe_generic generic;
+	struct fcp_icmnd64_wqe fcp_icmd;
+	struct fcp_iread64_wqe fcp_iread;
+	struct fcp_iwrite64_wqe fcp_iwrite;
 	struct xmit_seq64_wqe xmit_sequence;
 	struct gen_req64_wqe gen_req;
 };
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f57d02c3b6cf..b43f7ac9812c 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -6158,11 +6158,12 @@ lpfc_create_shost(struct lpfc_hba *phba)
 	 * any initial discovery should be completed.
 	 */
 	vport->load_flag |= FC_ALLOW_FDMI;
-	if (phba->cfg_fdmi_on > LPFC_FDMI_NO_SUPPORT) {
+	if (phba->cfg_enable_SmartSAN ||
+	    (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
 
 		/* Setup appropriate attribute masks */
 		vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
-		if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN)
+		if (phba->cfg_enable_SmartSAN)
 			vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
 		else
 			vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
@@ -7264,8 +7265,15 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
 		phba->sli4_hba.fcp_cq[idx] = qdesc;
 
 		/* Create Fast Path FCP WQs */
-		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
-					      phba->sli4_hba.wq_ecount);
+		if (phba->fcp_embed_io) {
+			qdesc = lpfc_sli4_queue_alloc(phba,
+						      LPFC_WQE128_SIZE,
+						      LPFC_WQE128_DEF_COUNT);
+		} else {
+			qdesc = lpfc_sli4_queue_alloc(phba,
+						      phba->sli4_hba.wq_esize,
+						      phba->sli4_hba.wq_ecount);
+		}
 		if (!qdesc) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"0503 Failed allocate fast-path FCP "
@@ -9510,6 +9518,15 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
 		sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;
 
+	/*
+	 * Issue IOs with CDB embedded in WQE to minimized the number
+	 * of DMAs the firmware has to do. Setting this to 1 also forces
+	 * the driver to use 128 bytes WQEs for FCP IOs.
+	 */
+	if (bf_get(cfg_ext_embed_cb, mbx_sli4_parameters))
+		phba->fcp_embed_io = 1;
+	else
+		phba->fcp_embed_io = 0;
 	return 0;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index f87f90e9b7df..12dbe99ccc50 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -2145,10 +2145,12 @@ lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys)
 	reg_vfi->wwn[1] = cpu_to_le32(reg_vfi->wwn[1]);
 	reg_vfi->e_d_tov = phba->fc_edtov;
 	reg_vfi->r_a_tov = phba->fc_ratov;
-	reg_vfi->bde.addrHigh = putPaddrHigh(phys);
-	reg_vfi->bde.addrLow = putPaddrLow(phys);
-	reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
-	reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+	if (phys) {
+		reg_vfi->bde.addrHigh = putPaddrHigh(phys);
+		reg_vfi->bde.addrLow = putPaddrLow(phys);
+		reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
+		reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+	}
 	bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID);
 
 	/* Only FC supports upd bit */
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 193733e8c823..56a3df4fddb0 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
  /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -1512,6 +1512,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
 	if ((mb = phba->sli.mbox_active)) {
 		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
+			ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND;
 			lpfc_nlp_put(ndlp);
 			mb->context2 = NULL;
 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -1527,6 +1528,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
 				__lpfc_mbuf_free(phba, mp->virt, mp->phys);
 				kfree(mp);
 			}
+			ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND;
 			lpfc_nlp_put(ndlp);
 			list_del(&mb->list);
 			phba->sli.mboxq_cnt--;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 2207726b88ee..70edf21ae1b9 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -2000,10 +2000,9 @@ lpfc_sli_hbqbuf_get(struct list_head *rb_list)
  * @phba: Pointer to HBA context object.
  * @tag: Tag of the hbq buffer.
  *
- * This function is called with hbalock held. This function searches
- * for the hbq buffer associated with the given tag in the hbq buffer
- * list. If it finds the hbq buffer, it returns the hbq_buffer other wise
- * it returns NULL.
+ * This function searches for the hbq buffer associated with the given tag in
+ * the hbq buffer list. If it finds the hbq buffer, it returns the hbq_buffer
+ * otherwise it returns NULL.
  **/
 static struct hbq_dmabuf *
 lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
@@ -2012,8 +2011,6 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
 	struct hbq_dmabuf *hbq_buf;
 	uint32_t hbqno;
 
-	lockdep_assert_held(&phba->hbalock);
-
 	hbqno = tag >> 16;
 	if (hbqno >= LPFC_MAX_HBQS)
 		return NULL;
@@ -2211,6 +2208,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		rpi = pmb->u.mb.un.varWords[0];
 		vpi = pmb->u.mb.un.varRegLogin.vpi;
 		lpfc_unreg_login(phba, vpi, rpi, pmb);
+		pmb->vport = vport;
 		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 		if (rc != MBX_NOT_FINISHED)
@@ -4688,6 +4686,7 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
 
 		break;
 	}
+	phba->fcp_embed_io = 0;	/* SLI4 FC support only */
 
 	rc = lpfc_sli_config_port(phba, mode);
 
@@ -6320,10 +6319,12 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 
 	mqe = &mboxq->u.mqe;
 	phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev);
-	if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev))
+	if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev)) {
 		phba->hba_flag |= HBA_FCOE_MODE;
-	else
+		phba->fcp_embed_io = 0;	/* SLI4 FC support only */
+	} else {
 		phba->hba_flag &= ~HBA_FCOE_MODE;
+	}
 
 	if (bf_get(lpfc_mbx_rd_rev_cee_ver, &mqe->un.read_rev) ==
 		LPFC_DCBX_CEE_MODE)
@@ -8218,12 +8219,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 	else
 		command_type = ELS_COMMAND_NON_FIP;
 
+	if (phba->fcp_embed_io)
+		memset(wqe, 0, sizeof(union lpfc_wqe128));
 	/* Some of the fields are in the right position already */
 	memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
-	abort_tag = (uint32_t) iocbq->iotag;
-	xritag = iocbq->sli4_xritag;
 	wqe->generic.wqe_com.word7 = 0; /* The ct field has moved so reset */
 	wqe->generic.wqe_com.word10 = 0;
+
+	abort_tag = (uint32_t) iocbq->iotag;
+	xritag = iocbq->sli4_xritag;
 	/* words0-2 bpl convert bde */
 	if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
 		numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize /
@@ -8372,11 +8376,9 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		       iocbq->iocb.ulpFCP2Rcvy);
 		bf_set(wqe_lnk, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpXS);
 		/* Always open the exchange */
-		bf_set(wqe_xc, &wqe->fcp_iwrite.wqe_com, 0);
 		bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE);
 		bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
 		       LPFC_WQE_LENLOC_WORD4);
-		bf_set(wqe_ebde_cnt, &wqe->fcp_iwrite.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU);
 		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
 		if (iocbq->iocb_flag & LPFC_IO_OAS) {
@@ -8387,6 +8389,35 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 				       (phba->cfg_XLanePriority << 1));
 			}
 		}
+		/* Note, word 10 is already initialized to 0 */
+
+		if (phba->fcp_embed_io) {
+			struct lpfc_scsi_buf *lpfc_cmd;
+			struct sli4_sge *sgl;
+			union lpfc_wqe128 *wqe128;
+			struct fcp_cmnd *fcp_cmnd;
+			uint32_t *ptr;
+
+			/* 128 byte wqe support here */
+			wqe128 = (union lpfc_wqe128 *)wqe;
+
+			lpfc_cmd = iocbq->context1;
+			sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+			fcp_cmnd = lpfc_cmd->fcp_cmnd;
+
+			/* Word 0-2 - FCP_CMND */
+			wqe128->generic.bde.tus.f.bdeFlags =
+				BUFF_TYPE_BDE_IMMED;
+			wqe128->generic.bde.tus.f.bdeSize = sgl->sge_len;
+			wqe128->generic.bde.addrHigh = 0;
+			wqe128->generic.bde.addrLow =  88;  /* Word 22 */
+
+			bf_set(wqe_wqes, &wqe128->fcp_iwrite.wqe_com, 1);
+
+			/* Word 22-29  FCP CMND Payload */
+			ptr = &wqe128->words[22];
+			memcpy(ptr, fcp_cmnd, sizeof(struct fcp_cmnd));
+		}
 		break;
 	case CMD_FCP_IREAD64_CR:
 		/* word3 iocb=iotag wqe=payload_offset_len */
@@ -8401,11 +8432,9 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		       iocbq->iocb.ulpFCP2Rcvy);
 		bf_set(wqe_lnk, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpXS);
 		/* Always open the exchange */
-		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
 		bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ);
 		bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
 		       LPFC_WQE_LENLOC_WORD4);
-		bf_set(wqe_ebde_cnt, &wqe->fcp_iread.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU);
 		bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
 		if (iocbq->iocb_flag & LPFC_IO_OAS) {
@@ -8416,6 +8445,35 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 				       (phba->cfg_XLanePriority << 1));
 			}
 		}
+		/* Note, word 10 is already initialized to 0 */
+
+		if (phba->fcp_embed_io) {
+			struct lpfc_scsi_buf *lpfc_cmd;
+			struct sli4_sge *sgl;
+			union lpfc_wqe128 *wqe128;
+			struct fcp_cmnd *fcp_cmnd;
+			uint32_t *ptr;
+
+			/* 128 byte wqe support here */
+			wqe128 = (union lpfc_wqe128 *)wqe;
+
+			lpfc_cmd = iocbq->context1;
+			sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+			fcp_cmnd = lpfc_cmd->fcp_cmnd;
+
+			/* Word 0-2 - FCP_CMND */
+			wqe128->generic.bde.tus.f.bdeFlags =
+				BUFF_TYPE_BDE_IMMED;
+			wqe128->generic.bde.tus.f.bdeSize = sgl->sge_len;
+			wqe128->generic.bde.addrHigh = 0;
+			wqe128->generic.bde.addrLow =  88;  /* Word 22 */
+
+			bf_set(wqe_wqes, &wqe128->fcp_iread.wqe_com, 1);
+
+			/* Word 22-29  FCP CMND Payload */
+			ptr = &wqe128->words[22];
+			memcpy(ptr, fcp_cmnd, sizeof(struct fcp_cmnd));
+		}
 		break;
 	case CMD_FCP_ICMND64_CR:
 		/* word3 iocb=iotag wqe=payload_offset_len */
@@ -8427,13 +8485,11 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		/* word3 iocb=IO_TAG wqe=reserved */
 		bf_set(wqe_pu, &wqe->fcp_icmd.wqe_com, 0);
 		/* Always open the exchange */
-		bf_set(wqe_xc, &wqe->fcp_icmd.wqe_com, 0);
 		bf_set(wqe_dbde, &wqe->fcp_icmd.wqe_com, 1);
 		bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_WRITE);
 		bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
 		bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com,
 		       LPFC_WQE_LENLOC_NONE);
-		bf_set(wqe_ebde_cnt, &wqe->fcp_icmd.wqe_com, 0);
 		bf_set(wqe_erp, &wqe->fcp_icmd.wqe_com,
 		       iocbq->iocb.ulpFCP2Rcvy);
 		if (iocbq->iocb_flag & LPFC_IO_OAS) {
@@ -8444,6 +8500,35 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 				       (phba->cfg_XLanePriority << 1));
 			}
 		}
+		/* Note, word 10 is already initialized to 0 */
+
+		if (phba->fcp_embed_io) {
+			struct lpfc_scsi_buf *lpfc_cmd;
+			struct sli4_sge *sgl;
+			union lpfc_wqe128 *wqe128;
+			struct fcp_cmnd *fcp_cmnd;
+			uint32_t *ptr;
+
+			/* 128 byte wqe support here */
+			wqe128 = (union lpfc_wqe128 *)wqe;
+
+			lpfc_cmd = iocbq->context1;
+			sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+			fcp_cmnd = lpfc_cmd->fcp_cmnd;
+
+			/* Word 0-2 - FCP_CMND */
+			wqe128->generic.bde.tus.f.bdeFlags =
+				BUFF_TYPE_BDE_IMMED;
+			wqe128->generic.bde.tus.f.bdeSize = sgl->sge_len;
+			wqe128->generic.bde.addrHigh = 0;
+			wqe128->generic.bde.addrLow =  88;  /* Word 22 */
+
+			bf_set(wqe_wqes, &wqe128->fcp_icmd.wqe_com, 1);
+
+			/* Word 22-29  FCP CMND Payload */
+			ptr = &wqe128->words[22];
+			memcpy(ptr, fcp_cmnd, sizeof(struct fcp_cmnd));
+		}
 		break;
 	case CMD_GEN_REQUEST64_CR:
 		/* For this command calculate the xmit length of the
@@ -8675,12 +8760,19 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 			 struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	struct lpfc_sglq *sglq;
-	union lpfc_wqe wqe;
+	union lpfc_wqe *wqe;
+	union lpfc_wqe128 wqe128;
 	struct lpfc_queue *wq;
 	struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
 
 	lockdep_assert_held(&phba->hbalock);
 
+	/*
+	 * The WQE can be either 64 or 128 bytes,
+	 * so allocate space on the stack assuming the largest.
+	 */
+	wqe = (union lpfc_wqe *)&wqe128;
+
 	if (piocb->sli4_xritag == NO_XRI) {
 		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
 		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
@@ -8727,7 +8819,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 			return IOCB_ERROR;
 	}
 
-	if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+	if (lpfc_sli4_iocb2wqe(phba, piocb, wqe))
 		return IOCB_ERROR;
 
 	if ((piocb->iocb_flag & LPFC_IO_FCP) ||
@@ -8737,12 +8829,12 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 		} else {
 			wq = phba->sli4_hba.oas_wq;
 		}
-		if (lpfc_sli4_wq_put(wq, &wqe))
+		if (lpfc_sli4_wq_put(wq, wqe))
 			return IOCB_ERROR;
 	} else {
 		if (unlikely(!phba->sli4_hba.els_wq))
 			return IOCB_ERROR;
-		if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
+		if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, wqe))
 			return IOCB_ERROR;
 	}
 	lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
@@ -8757,9 +8849,9 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
  * pointer from the lpfc_hba struct.
  *
  * Return codes:
- * 	IOCB_ERROR - Error
- * 	IOCB_SUCCESS - Success
- * 	IOCB_BUSY - Busy
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
  **/
 int
 __lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 4dc22562aaf1..fa0d531bf351 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "11.0.0.10."
+#define LPFC_DRIVER_VERSION "11.1.0.0."
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
@@ -30,4 +30,4 @@
 
 #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
 		LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2015 Emulex.  All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2016 Emulex.  All rights reserved."
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index b3f85def18cc..c27f4b724547 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -395,7 +395,8 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	/* At this point we are fully registered with SCSI Layer.  */
 	vport->load_flag |= FC_ALLOW_FDMI;
-	if (phba->cfg_fdmi_on > LPFC_FDMI_NO_SUPPORT) {
+	if (phba->cfg_enable_SmartSAN ||
+	    (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
 		/* Setup appropriate attribute masks */
 		vport->fdmi_hba_mask = phba->pport->fdmi_hba_mask;
 		vport->fdmi_port_mask = phba->pport->fdmi_port_mask;
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index bb2381314a2b..a590089b9397 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -28,24 +28,23 @@
 
 /* Definitions for the core NCR5380 driver. */
 
-#define PSEUDO_DMA
-
-#define NCR5380_implementation_fields   unsigned char *pdma_base
+#define NCR5380_implementation_fields   unsigned char *pdma_base; \
+                                        int pdma_residual
 
 #define NCR5380_read(reg)               macscsi_read(instance, reg)
 #define NCR5380_write(reg, value)       macscsi_write(instance, reg, value)
 
-#define NCR5380_pread                   macscsi_pread
-#define NCR5380_pwrite                  macscsi_pwrite
-#define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+        macscsi_dma_xfer_len(instance, cmd)
+#define NCR5380_dma_recv_setup          macscsi_pread
+#define NCR5380_dma_send_setup          macscsi_pwrite
+#define NCR5380_dma_residual(instance)  (hostdata->pdma_residual)
 
 #define NCR5380_intr                    macscsi_intr
 #define NCR5380_queue_command           macscsi_queue_command
 #define NCR5380_abort                   macscsi_abort
 #define NCR5380_bus_reset               macscsi_bus_reset
 #define NCR5380_info                    macscsi_info
-#define NCR5380_show_info               macscsi_show_info
-#define NCR5380_write_info              macscsi_write_info
 
 #include "NCR5380.h"
 
@@ -57,8 +56,6 @@ static int setup_sg_tablesize = -1;
 module_param(setup_sg_tablesize, int, 0);
 static int setup_use_pdma = -1;
 module_param(setup_use_pdma, int, 0);
-static int setup_use_tagged_queuing = -1;
-module_param(setup_use_tagged_queuing, int, 0);
 static int setup_hostid = -1;
 module_param(setup_hostid, int, 0);
 static int setup_toshiba_delay = -1;
@@ -97,8 +94,7 @@ static int __init mac_scsi_setup(char *str)
 		setup_sg_tablesize = ints[3];
 	if (ints[0] >= 4)
 		setup_hostid = ints[4];
-	if (ints[0] >= 5)
-		setup_use_tagged_queuing = ints[5];
+	/* ints[5] (use_tagged_queuing) is ignored */
 	if (ints[0] >= 6)
 		setup_use_pdma = ints[6];
 	if (ints[0] >= 7)
@@ -109,19 +105,9 @@ static int __init mac_scsi_setup(char *str)
 __setup("mac5380=", mac_scsi_setup);
 #endif /* !MODULE */
 
-#ifdef PSEUDO_DMA
-/* 
-   Pseudo-DMA: (Ove Edlund)
-   The code attempts to catch bus errors that occur if one for example
-   "trips over the cable".
-   XXX: Since bus errors in the PDMA routines never happen on my 
-   computer, the bus error code is untested. 
-   If the code works as intended, a bus error results in Pseudo-DMA 
-   being disabled, meaning that the driver switches to slow handshake.
-   If bus errors are NOT extremely rare, this has to be changed. 
-*/
-
-#define CP_IO_TO_MEM(s,d,len)				\
+/* Pseudo DMA asm originally by Ove Edlund */
+
+#define CP_IO_TO_MEM(s,d,n)				\
 __asm__ __volatile__					\
     ("    cmp.w  #4,%2\n"				\
      "    bls    8f\n"					\
@@ -158,61 +144,73 @@ __asm__ __volatile__					\
      " 9: \n"						\
      ".section .fixup,\"ax\"\n"				\
      "    .even\n"					\
-     "90: moveq.l #1, %2\n"				\
+     "91: moveq.l #1, %2\n"				\
+     "    jra 9b\n"					\
+     "94: moveq.l #4, %2\n"				\
      "    jra 9b\n"					\
      ".previous\n"					\
      ".section __ex_table,\"a\"\n"			\
      "   .align 4\n"					\
-     "   .long  1b,90b\n"				\
-     "   .long  3b,90b\n"				\
-     "   .long 31b,90b\n"				\
-     "   .long 32b,90b\n"				\
-     "   .long 33b,90b\n"				\
-     "   .long 34b,90b\n"				\
-     "   .long 35b,90b\n"				\
-     "   .long 36b,90b\n"				\
-     "   .long 37b,90b\n"				\
-     "   .long  5b,90b\n"				\
-     "   .long  7b,90b\n"				\
+     "   .long  1b,91b\n"				\
+     "   .long  3b,94b\n"				\
+     "   .long 31b,94b\n"				\
+     "   .long 32b,94b\n"				\
+     "   .long 33b,94b\n"				\
+     "   .long 34b,94b\n"				\
+     "   .long 35b,94b\n"				\
+     "   .long 36b,94b\n"				\
+     "   .long 37b,94b\n"				\
+     "   .long  5b,94b\n"				\
+     "   .long  7b,91b\n"				\
      ".previous"					\
-     : "=a"(s), "=a"(d), "=d"(len)			\
-     : "0"(s), "1"(d), "2"(len)				\
+     : "=a"(s), "=a"(d), "=d"(n)			\
+     : "0"(s), "1"(d), "2"(n)				\
      : "d0")
 
 static int macscsi_pread(struct Scsi_Host *instance,
                          unsigned char *dst, int len)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned char *d;
-	unsigned char *s;
-
-	s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
-	d = dst;
-
-	/* These conditions are derived from MacOS */
-
-	while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
-	       !(NCR5380_read(STATUS_REG) & SR_REQ))
-		;
-
-	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
-	    (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
-		pr_err("Error in macscsi_pread\n");
-		return -1;
+	unsigned char *s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
+	unsigned char *d = dst;
+	int n = len;
+	int transferred;
+
+	while (!NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+	                              BASR_DRQ | BASR_PHASE_MATCH,
+	                              BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
+		CP_IO_TO_MEM(s, d, n);
+
+		transferred = d - dst - n;
+		hostdata->pdma_residual = len - transferred;
+
+		/* No bus error. */
+		if (n == 0)
+			return 0;
+
+		/* Target changed phase early? */
+		if (NCR5380_poll_politely2(instance, STATUS_REG, SR_REQ, SR_REQ,
+		                           BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0)
+			scmd_printk(KERN_ERR, hostdata->connected,
+			            "%s: !REQ and !ACK\n", __func__);
+		if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
+			return 0;
+
+		dsprintk(NDEBUG_PSEUDO_DMA, instance,
+		         "%s: bus error (%d/%d)\n", __func__, transferred, len);
+		NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
+		d = dst + transferred;
+		n = len - transferred;
 	}
 
-	CP_IO_TO_MEM(s, d, len);
-
-	if (len != 0) {
-		pr_notice("Bus error in macscsi_pread\n");
-		return -1;
-	}
-
-	return 0;
+	scmd_printk(KERN_ERR, hostdata->connected,
+	            "%s: phase mismatch or !DRQ\n", __func__);
+	NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
+	return -1;
 }
 
 
-#define CP_MEM_TO_IO(s,d,len)				\
+#define CP_MEM_TO_IO(s,d,n)				\
 __asm__ __volatile__					\
     ("    cmp.w  #4,%2\n"				\
      "    bls    8f\n"					\
@@ -249,59 +247,89 @@ __asm__ __volatile__					\
      " 9: \n"						\
      ".section .fixup,\"ax\"\n"				\
      "    .even\n"					\
-     "90: moveq.l #1, %2\n"				\
+     "91: moveq.l #1, %2\n"				\
+     "    jra 9b\n"					\
+     "94: moveq.l #4, %2\n"				\
      "    jra 9b\n"					\
      ".previous\n"					\
      ".section __ex_table,\"a\"\n"			\
      "   .align 4\n"					\
-     "   .long  1b,90b\n"				\
-     "   .long  3b,90b\n"				\
-     "   .long 31b,90b\n"				\
-     "   .long 32b,90b\n"				\
-     "   .long 33b,90b\n"				\
-     "   .long 34b,90b\n"				\
-     "   .long 35b,90b\n"				\
-     "   .long 36b,90b\n"				\
-     "   .long 37b,90b\n"				\
-     "   .long  5b,90b\n"				\
-     "   .long  7b,90b\n"				\
+     "   .long  1b,91b\n"				\
+     "   .long  3b,94b\n"				\
+     "   .long 31b,94b\n"				\
+     "   .long 32b,94b\n"				\
+     "   .long 33b,94b\n"				\
+     "   .long 34b,94b\n"				\
+     "   .long 35b,94b\n"				\
+     "   .long 36b,94b\n"				\
+     "   .long 37b,94b\n"				\
+     "   .long  5b,94b\n"				\
+     "   .long  7b,91b\n"				\
      ".previous"					\
-     : "=a"(s), "=a"(d), "=d"(len)			\
-     : "0"(s), "1"(d), "2"(len)				\
+     : "=a"(s), "=a"(d), "=d"(n)			\
+     : "0"(s), "1"(d), "2"(n)				\
      : "d0")
 
 static int macscsi_pwrite(struct Scsi_Host *instance,
                           unsigned char *src, int len)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned char *s;
-	unsigned char *d;
-
-	s = src;
-	d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
-
-	/* These conditions are derived from MacOS */
+	unsigned char *s = src;
+	unsigned char *d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
+	int n = len;
+	int transferred;
+
+	while (!NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+	                              BASR_DRQ | BASR_PHASE_MATCH,
+	                              BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
+		CP_MEM_TO_IO(s, d, n);
+
+		transferred = s - src - n;
+		hostdata->pdma_residual = len - transferred;
+
+		/* Target changed phase early? */
+		if (NCR5380_poll_politely2(instance, STATUS_REG, SR_REQ, SR_REQ,
+		                           BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0)
+			scmd_printk(KERN_ERR, hostdata->connected,
+			            "%s: !REQ and !ACK\n", __func__);
+		if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
+			return 0;
+
+		/* No bus error. */
+		if (n == 0) {
+			if (NCR5380_poll_politely(instance, TARGET_COMMAND_REG,
+			                          TCR_LAST_BYTE_SENT,
+			                          TCR_LAST_BYTE_SENT, HZ / 64) < 0)
+				scmd_printk(KERN_ERR, hostdata->connected,
+				            "%s: Last Byte Sent timeout\n", __func__);
+			return 0;
+		}
+
+		dsprintk(NDEBUG_PSEUDO_DMA, instance,
+		         "%s: bus error (%d/%d)\n", __func__, transferred, len);
+		NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
+		s = src + transferred;
+		n = len - transferred;
+	}
 
-	while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
-	       (!(NCR5380_read(STATUS_REG) & SR_REQ) ||
-	        (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
-		;
+	scmd_printk(KERN_ERR, hostdata->connected,
+	            "%s: phase mismatch or !DRQ\n", __func__);
+	NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance);
 
-	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
-		pr_err("Error in macscsi_pwrite\n");
-		return -1;
-	}
+	return -1;
+}
 
-	CP_MEM_TO_IO(s, d, len);
+static int macscsi_dma_xfer_len(struct Scsi_Host *instance,
+                                struct scsi_cmnd *cmd)
+{
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 
-	if (len != 0) {
-		pr_notice("Bus error in macscsi_pwrite\n");
-		return -1;
-	}
+	if (hostdata->flags & FLAG_NO_PSEUDO_DMA ||
+	    cmd->SCp.this_residual < 16)
+		return 0;
 
-	return 0;
+	return cmd->SCp.this_residual;
 }
-#endif
 
 #include "NCR5380.c"
 
@@ -311,8 +339,6 @@ static int macscsi_pwrite(struct Scsi_Host *instance,
 static struct scsi_host_template mac_scsi_template = {
 	.module			= THIS_MODULE,
 	.proc_name		= DRV_MODULE_NAME,
-	.show_info		= macscsi_show_info,
-	.write_info		= macscsi_write_info,
 	.name			= "Macintosh NCR5380 SCSI",
 	.info			= macscsi_info,
 	.queuecommand		= macscsi_queue_command,
@@ -320,7 +346,7 @@ static struct scsi_host_template mac_scsi_template = {
 	.eh_bus_reset_handler	= macscsi_bus_reset,
 	.can_queue		= 16,
 	.this_id		= 7,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= 1,
 	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.cmd_size		= NCR5380_CMD_SIZE,
@@ -338,9 +364,7 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
 	if (!pio_mem)
 		return -ENODEV;
 
-#ifdef PSEUDO_DMA
 	pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-#endif
 
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 
@@ -358,8 +382,6 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
 		mac_scsi_template.sg_tablesize = setup_sg_tablesize;
 	if (setup_hostid >= 0)
 		mac_scsi_template.this_id = setup_hostid & 7;
-	if (setup_use_pdma < 0)
-		setup_use_pdma = 0;
 
 	instance = scsi_host_alloc(&mac_scsi_template,
 	                           sizeof(struct NCR5380_hostdata));
@@ -379,12 +401,9 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
 	} else
 		host_flags |= FLAG_NO_PSEUDO_DMA;
 
-#ifdef SUPPORT_TAGS
-	host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
-#endif
 	host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
 
-	error = NCR5380_init(instance, host_flags);
+	error = NCR5380_init(instance, host_flags | FLAG_LATE_DMA_SETUP);
 	if (error)
 		goto fail_init;
 
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index fce414a2cd76..ca86c885dfaa 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -35,8 +35,8 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"06.810.09.00-rc1"
-#define MEGASAS_RELDATE				"Jan. 28, 2016"
+#define MEGASAS_VERSION				"06.811.02.00-rc1"
+#define MEGASAS_RELDATE				"April 12, 2016"
 
 /*
  * Device IDs
@@ -1344,6 +1344,8 @@ struct megasas_ctrl_info {
 #define SCAN_PD_CHANNEL	0x1
 #define SCAN_VD_CHANNEL	0x2
 
+#define MEGASAS_KDUMP_QUEUE_DEPTH               100
+
 enum MR_SCSI_CMD_TYPE {
 	READ_WRITE_LDIO = 0,
 	NON_READ_WRITE_LDIO = 1,
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index e6ebc7ae2df1..f4b0690450d2 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2670,17 +2670,6 @@ blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
 }
 
 /**
- * megasas_reset_device -	Device reset handler entry point
- */
-static int megasas_reset_device(struct scsi_cmnd *scmd)
-{
-	/*
-	 * First wait for all commands to complete
-	 */
-	return megasas_generic_reset(scmd);
-}
-
-/**
  * megasas_reset_bus_host -	Bus & host reset handler entry point
  */
 static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
@@ -2702,6 +2691,50 @@ static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
 }
 
 /**
+ * megasas_task_abort - Issues task abort request to firmware
+ *			(supported only for fusion adapters)
+ * @scmd:		SCSI command pointer
+ */
+static int megasas_task_abort(struct scsi_cmnd *scmd)
+{
+	int ret;
+	struct megasas_instance *instance;
+
+	instance = (struct megasas_instance *)scmd->device->host->hostdata;
+
+	if (instance->ctrl_context)
+		ret = megasas_task_abort_fusion(scmd);
+	else {
+		sdev_printk(KERN_NOTICE, scmd->device, "TASK ABORT not supported\n");
+		ret = FAILED;
+	}
+
+	return ret;
+}
+
+/**
+ * megasas_reset_target:  Issues target reset request to firmware
+ *                        (supported only for fusion adapters)
+ * @scmd:                 SCSI command pointer
+ */
+static int megasas_reset_target(struct scsi_cmnd *scmd)
+{
+	int ret;
+	struct megasas_instance *instance;
+
+	instance = (struct megasas_instance *)scmd->device->host->hostdata;
+
+	if (instance->ctrl_context)
+		ret = megasas_reset_target_fusion(scmd);
+	else {
+		sdev_printk(KERN_NOTICE, scmd->device, "TARGET RESET not supported\n");
+		ret = FAILED;
+	}
+
+	return ret;
+}
+
+/**
  * megasas_bios_param - Returns disk geometry for a disk
  * @sdev:		device handle
  * @bdev:		block device
@@ -2969,8 +3002,8 @@ static struct scsi_host_template megasas_template = {
 	.slave_alloc = megasas_slave_alloc,
 	.slave_destroy = megasas_slave_destroy,
 	.queuecommand = megasas_queue_command,
-	.eh_device_reset_handler = megasas_reset_device,
-	.eh_bus_reset_handler = megasas_reset_bus_host,
+	.eh_target_reset_handler = megasas_reset_target,
+	.eh_abort_handler = megasas_task_abort,
 	.eh_host_reset_handler = megasas_reset_bus_host,
 	.eh_timed_out = megasas_reset_timer,
 	.shost_attrs = megaraid_host_attrs,
@@ -5152,7 +5185,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 
 	instance->instancet->enable_intr(instance);
 
-	dev_err(&instance->pdev->dev, "INIT adapter done\n");
+	dev_info(&instance->pdev->dev, "INIT adapter done\n");
 
 	megasas_setup_jbod_map(instance);
 
@@ -5598,14 +5631,6 @@ static int megasas_io_attach(struct megasas_instance *instance)
 	host->max_lun = MEGASAS_MAX_LUN;
 	host->max_cmd_len = 16;
 
-	/* Fusion only supports host reset */
-	if (instance->ctrl_context) {
-		host->hostt->eh_device_reset_handler = NULL;
-		host->hostt->eh_bus_reset_handler = NULL;
-		host->hostt->eh_target_reset_handler = megasas_reset_target_fusion;
-		host->hostt->eh_abort_handler = megasas_task_abort_fusion;
-	}
-
 	/*
 	 * Notify the mid-layer about the new controller
 	 */
@@ -5761,13 +5786,6 @@ static int megasas_probe_one(struct pci_dev *pdev,
 		break;
 	}
 
-	instance->system_info_buf = pci_zalloc_consistent(pdev,
-					sizeof(struct MR_DRV_SYSTEM_INFO),
-					&instance->system_info_h);
-
-	if (!instance->system_info_buf)
-		dev_info(&instance->pdev->dev, "Can't allocate system info buffer\n");
-
 	/* Crash dump feature related initialisation*/
 	instance->drv_buf_index = 0;
 	instance->drv_buf_alloc = 0;
@@ -5777,14 +5795,6 @@ static int megasas_probe_one(struct pci_dev *pdev,
 	spin_lock_init(&instance->crashdump_lock);
 	instance->crash_dump_buf = NULL;
 
-	if (!reset_devices)
-		instance->crash_dump_buf = pci_alloc_consistent(pdev,
-						CRASH_DMA_BUF_SIZE,
-						&instance->crash_dump_h);
-	if (!instance->crash_dump_buf)
-		dev_err(&pdev->dev, "Can't allocate Firmware "
-			"crash dump DMA buffer\n");
-
 	megasas_poll_wait_aen = 0;
 	instance->flag_ieee = 0;
 	instance->ev = NULL;
@@ -5803,11 +5813,26 @@ static int megasas_probe_one(struct pci_dev *pdev,
 		goto fail_alloc_dma_buf;
 	}
 
-	instance->pd_info = pci_alloc_consistent(pdev,
-		sizeof(struct MR_PD_INFO), &instance->pd_info_h);
+	if (!reset_devices) {
+		instance->system_info_buf = pci_zalloc_consistent(pdev,
+					sizeof(struct MR_DRV_SYSTEM_INFO),
+					&instance->system_info_h);
+		if (!instance->system_info_buf)
+			dev_info(&instance->pdev->dev, "Can't allocate system info buffer\n");
+
+		instance->pd_info = pci_alloc_consistent(pdev,
+			sizeof(struct MR_PD_INFO), &instance->pd_info_h);
 
-	if (!instance->pd_info)
-		dev_err(&instance->pdev->dev, "Failed to alloc mem for pd_info\n");
+		if (!instance->pd_info)
+			dev_err(&instance->pdev->dev, "Failed to alloc mem for pd_info\n");
+
+		instance->crash_dump_buf = pci_alloc_consistent(pdev,
+						CRASH_DMA_BUF_SIZE,
+						&instance->crash_dump_h);
+		if (!instance->crash_dump_buf)
+			dev_err(&pdev->dev, "Can't allocate Firmware "
+				"crash dump DMA buffer\n");
+	}
 
 	/*
 	 * Initialize locks and queues
@@ -7174,6 +7199,16 @@ static int __init megasas_init(void)
 	int rval;
 
 	/*
+	 * Booted in kdump kernel, minimize memory footprints by
+	 * disabling few features
+	 */
+	if (reset_devices) {
+		msix_vectors = 1;
+		rdpq_enable = 0;
+		dual_qdepth_disable = 1;
+	}
+
+	/*
 	 * Announce driver version and other information
 	 */
 	pr_info("megasas: %s\n", MEGASAS_VERSION);
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 98a848bdfdc2..ec837544f784 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -257,6 +257,9 @@ megasas_fusion_update_can_queue(struct megasas_instance *instance, int fw_boot_c
 		if (!instance->is_rdpq)
 			instance->max_fw_cmds = min_t(u16, instance->max_fw_cmds, 1024);
 
+		if (reset_devices)
+			instance->max_fw_cmds = min(instance->max_fw_cmds,
+						(u16)MEGASAS_KDUMP_QUEUE_DEPTH);
 		/*
 		* Reduce the max supported cmds by 1. This is to ensure that the
 		* reply_q_sz (1 more than the max cmd that driver may send)
@@ -851,7 +854,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 		ret = 1;
 		goto fail_fw_init;
 	}
-	dev_err(&instance->pdev->dev, "Init cmd success\n");
+	dev_info(&instance->pdev->dev, "Init cmd success\n");
 
 	ret = 0;
 
@@ -2759,6 +2762,7 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance,
 			dev_warn(&instance->pdev->dev, "Found FW in FAULT state,"
 			       " will reset adapter scsi%d.\n",
 				instance->host->host_no);
+			megasas_complete_cmd_dpc_fusion((unsigned long)instance);
 			retval = 1;
 			goto out;
 		}
@@ -2766,6 +2770,7 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance,
 		if (reason == MFI_IO_TIMEOUT_OCR) {
 			dev_info(&instance->pdev->dev,
 				"MFI IO is timed out, initiating OCR\n");
+			megasas_complete_cmd_dpc_fusion((unsigned long)instance);
 			retval = 1;
 			goto out;
 		}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index e4db5fb3239a..93d7c28f8162 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -57,6 +57,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/time.h>
+#include <linux/ktime.h>
 #include <linux/kthread.h>
 #include <linux/aer.h>
 
@@ -3207,10 +3208,10 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
 		sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
 	else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
 		sg_tablesize = min_t(unsigned short, sg_tablesize,
-				      SCSI_MAX_SG_CHAIN_SEGMENTS);
+				      SG_MAX_SEGMENTS);
 		pr_warn(MPT3SAS_FMT
 		 "sg_tablesize(%u) is bigger than kernel"
-		 " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
+		 " defined SG_CHUNK_SIZE(%u)\n", ioc->name,
 		 sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
 	}
 	ioc->shost->sg_tablesize = sg_tablesize;
@@ -4387,7 +4388,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	Mpi2IOCInitRequest_t mpi_request;
 	Mpi2IOCInitReply_t mpi_reply;
 	int i, r = 0;
-	struct timeval current_time;
+	ktime_t current_time;
 	u16 ioc_status;
 	u32 reply_post_free_array_sz = 0;
 	Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
@@ -4449,9 +4450,8 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	/* This time stamp specifies number of milliseconds
 	 * since epoch ~ midnight January 1, 1970.
 	 */
-	do_gettimeofday(&current_time);
-	mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
-	    (current_time.tv_usec / 1000));
+	current_time = ktime_get_real();
+	mpi_request.TimeStamp = cpu_to_le64(ktime_to_ms(current_time));
 
 	if (ioc->logging_level & MPT_DEBUG_INIT) {
 		__le32 *mfp;
@@ -5030,7 +5030,7 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 static int
 _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 {
-	int r, i;
+	int r, i, index;
 	unsigned long	flags;
 	u32 reply_address;
 	u16 smid;
@@ -5039,8 +5039,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	struct _event_ack_list *delayed_event_ack, *delayed_event_ack_next;
 	u8 hide_flag;
 	struct adapter_reply_queue *reply_q;
-	long reply_post_free;
-	u32 reply_post_free_sz, index = 0;
+	Mpi2ReplyDescriptorsUnion_t *reply_post_free_contig;
 
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
@@ -5124,27 +5123,27 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		_base_assign_reply_queues(ioc);
 
 	/* initialize Reply Post Free Queue */
-	reply_post_free_sz = ioc->reply_post_queue_depth *
-	    sizeof(Mpi2DefaultReplyDescriptor_t);
-	reply_post_free = (long)ioc->reply_post[index].reply_post_free;
+	index = 0;
+	reply_post_free_contig = ioc->reply_post[0].reply_post_free;
 	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		/*
+		 * If RDPQ is enabled, switch to the next allocation.
+		 * Otherwise advance within the contiguous region.
+		 */
+		if (ioc->rdpq_array_enable) {
+			reply_q->reply_post_free =
+				ioc->reply_post[index++].reply_post_free;
+		} else {
+			reply_q->reply_post_free = reply_post_free_contig;
+			reply_post_free_contig += ioc->reply_post_queue_depth;
+		}
+
 		reply_q->reply_post_host_index = 0;
-		reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
-		    reply_post_free;
 		for (i = 0; i < ioc->reply_post_queue_depth; i++)
 			reply_q->reply_post_free[i].Words =
 			    cpu_to_le64(ULLONG_MAX);
 		if (!_base_is_controller_msix_enabled(ioc))
 			goto skip_init_reply_post_free_queue;
-		/*
-		 * If RDPQ is enabled, switch to the next allocation.
-		 * Otherwise advance within the contiguous region.
-		 */
-		if (ioc->rdpq_array_enable)
-			reply_post_free = (long)
-			    ioc->reply_post[++index].reply_post_free;
-		else
-			reply_post_free += reply_post_free_sz;
 	}
  skip_init_reply_post_free_queue:
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 32580b514b18..6940c577053f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -90,7 +90,7 @@
 /*
  * Set MPT3SAS_SG_DEPTH value based on user input.
  */
-#define MPT_MAX_PHYS_SEGMENTS	SCSI_MAX_SG_SEGMENTS
+#define MPT_MAX_PHYS_SEGMENTS	SG_CHUNK_SIZE
 #define MPT_MIN_PHYS_SEGMENTS	16
 
 #ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index e0e4920d0fa6..f2139e5604a3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -174,13 +174,13 @@ struct sense_info {
  * struct fw_event_work - firmware event struct
  * @list: link list framework
  * @work: work object (ioc->fault_reset_work_q)
- * @cancel_pending_work: flag set during reset handling
  * @ioc: per adapter object
  * @device_handle: device handle
  * @VF_ID: virtual function id
  * @VP_ID: virtual port id
  * @ignore: flag meaning this event has been marked to ignore
- * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
+ * @event: firmware event MPI2_EVENT_XXX defined in mpi2_ioc.h
+ * @refcount: kref for this event
  * @event_data: reply event data payload follows
  *
  * This object stored on ioc->fw_event_list.
@@ -188,8 +188,6 @@ struct sense_info {
 struct fw_event_work {
 	struct list_head	list;
 	struct work_struct	work;
-	u8			cancel_pending_work;
-	struct delayed_work	delayed_work;
 
 	struct MPT3SAS_ADAPTER *ioc;
 	u16			device_handle;
@@ -2804,12 +2802,12 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
 		/*
 		 * Wait on the fw_event to complete. If this returns 1, then
 		 * the event was never executed, and we need a put for the
-		 * reference the delayed_work had on the fw_event.
+		 * reference the work had on the fw_event.
 		 *
 		 * If it did execute, we wait for it to finish, and the put will
 		 * happen from _firmware_event_work()
 		 */
-		if (cancel_delayed_work_sync(&fw_event->delayed_work))
+		if (cancel_work_sync(&fw_event->work))
 			fw_event_work_put(fw_event);
 
 		fw_event_work_put(fw_event);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index c7c250519c4b..8280046fd1f0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -704,24 +704,7 @@ static struct pci_device_id mvs_pci_table[] = {
 		.class_mask	= 0,
 		.driver_data	= chip_9445,
 	},
-	{
-		.vendor		= PCI_VENDOR_ID_MARVELL_EXT,
-		.device		= 0x9485,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= 0x9480,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= chip_9485,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_MARVELL_EXT,
-		.device		= 0x9485,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= 0x9485,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= chip_9485,
-	},
+	{ PCI_VDEVICE(MARVELL_EXT, 0x9485), chip_9485 }, /* Marvell 9480/9485 (any vendor/model) */
 	{ PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
 	{ PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
 	{ PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index 512037e27783..2f689ae7a803 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -1,5 +1,3 @@
-#define PSEUDO_DMA
-
 /*
  * This driver adapted from Drew Eckhardt's Trantor T128 driver
  *
@@ -77,7 +75,6 @@
 
 #include <scsi/scsi_host.h>
 #include "pas16.h"
-#define AUTOPROBE_IRQ
 #include "NCR5380.h"
 
 
@@ -377,7 +374,7 @@ static int __init pas16_detect(struct scsi_host_template *tpnt)
 		
 	instance->io_port = io_port;
 
-	if (NCR5380_init(instance, 0))
+	if (NCR5380_init(instance, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP))
 		goto out_unregister;
 
 	NCR5380_maybe_reset_bus(instance);
@@ -460,7 +457,7 @@ static int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev,
 }
 
 /*
- * Function : int NCR5380_pread (struct Scsi_Host *instance, 
+ * Function : int pas16_pread (struct Scsi_Host *instance,
  *	unsigned char *dst, int len)
  *
  * Purpose : Fast 5380 pseudo-dma read function, transfers len bytes to 
@@ -472,14 +469,14 @@ static int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev,
  * 	timeout.
  */
 
-static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
-    int len) {
+static inline int pas16_pread(struct Scsi_Host *instance,
+                              unsigned char *dst, int len)
+{
     register unsigned char  *d = dst;
     register unsigned short reg = (unsigned short) (instance->io_port + 
 	P_DATA_REG_OFFSET);
     register int i = len;
     int ii = 0;
-    struct NCR5380_hostdata *hostdata = shost_priv(instance);
 
     while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) )
 	 ++ii;
@@ -492,13 +489,11 @@ static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
 	    instance->host_no);
 	return -1;
     }
-    if (ii > hostdata->spin_max_r)
-        hostdata->spin_max_r = ii;
     return 0;
 }
 
 /*
- * Function : int NCR5380_pwrite (struct Scsi_Host *instance, 
+ * Function : int pas16_pwrite (struct Scsi_Host *instance,
  *	unsigned char *src, int len)
  *
  * Purpose : Fast 5380 pseudo-dma write function, transfers len bytes from
@@ -510,13 +505,13 @@ static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
  * 	timeout.
  */
 
-static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src,
-    int len) {
+static inline int pas16_pwrite(struct Scsi_Host *instance,
+                               unsigned char *src, int len)
+{
     register unsigned char *s = src;
     register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET);
     register int i = len;
     int ii = 0;
-    struct NCR5380_hostdata *hostdata = shost_priv(instance);
 
     while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) )
 	 ++ii;
@@ -529,8 +524,6 @@ static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src
 	    instance->host_no);
 	return -1;
     }
-    if (ii > hostdata->spin_max_w)
-        hostdata->spin_max_w = ii;
     return 0;
 }
 
@@ -550,8 +543,6 @@ static struct scsi_host_template driver_template = {
 	.detect			= pas16_detect,
 	.release		= pas16_release,
 	.proc_name		= "pas16",
-	.show_info		= pas16_show_info,
-	.write_info		= pas16_write_info,
 	.info			= pas16_info,
 	.queuecommand		= pas16_queue_command,
 	.eh_abort_handler	= pas16_abort,
diff --git a/drivers/scsi/pas16.h b/drivers/scsi/pas16.h
index d37527717225..9fe7f33660b4 100644
--- a/drivers/scsi/pas16.h
+++ b/drivers/scsi/pas16.h
@@ -103,14 +103,15 @@
 #define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
 
 #define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+#define NCR5380_dma_recv_setup		pas16_pread
+#define NCR5380_dma_send_setup		pas16_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_intr pas16_intr
 #define NCR5380_queue_command pas16_queue_command
 #define NCR5380_abort pas16_abort
 #define NCR5380_bus_reset pas16_bus_reset
 #define NCR5380_info pas16_info
-#define NCR5380_show_info pas16_show_info
-#define NCR5380_write_info pas16_write_info
 
 /* 15 14 12 10 7 5 3 
    1101 0100 1010 1000 */
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 062ab34b86f8..6bd7bf4f4a81 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -418,8 +418,6 @@ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
 		if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
 			pm8001_ha->io_mem[logicalBar].membase =
 				pci_resource_start(pdev, bar);
-			pm8001_ha->io_mem[logicalBar].membase &=
-				(u32)PCI_BASE_ADDRESS_MEM_MASK;
 			pm8001_ha->io_mem[logicalBar].memsize =
 				pci_resource_len(pdev, bar);
 			pm8001_ha->io_mem[logicalBar].memvirtaddr =
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index b5029e543b91..15dff7099955 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -6,6 +6,7 @@
  */
 #include "qla_def.h"
 #include <linux/delay.h>
+#include <linux/ktime.h>
 #include <linux/pci.h>
 #include <linux/ratelimit.h>
 #include <linux/vmalloc.h>
@@ -1812,7 +1813,6 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type)
 	struct host_system_info *phost_info;
 	struct register_host_info *preg_hsi;
 	struct new_utsname *p_sysid = NULL;
-	struct timeval tv;
 
 	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
 	if (!sp)
@@ -1886,8 +1886,7 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type)
 			    p_sysid->domainname, DOMNAME_LENGTH);
 			strncpy(phost_info->hostdriver,
 			    QLA2XXX_VERSION, VERSION_LENGTH);
-			do_gettimeofday(&tv);
-			preg_hsi->utc = (uint64_t)tv.tv_sec;
+			preg_hsi->utc = (uint64_t)ktime_get_real_seconds();
 			ql_dbg(ql_dbg_init, vha, 0x0149,
 			    "ISP%04X: Host registration with firmware\n",
 			    ha->pdev->device);
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index b6b4cfdd7620..54380b434b30 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1229,7 +1229,7 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	if (buf == NULL) {
 		ql_log(ql_log_fatal, vha, 0x010c,
 		    "Unable to allocate memory.\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	for (i = 0; i < n; i++) {
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index b1bf42b93fcc..1deb6adc411f 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -784,8 +784,9 @@ void scsi_attach_vpd(struct scsi_device *sdev)
 	int pg83_supported = 0;
 	unsigned char __rcu *vpd_buf, *orig_vpd_buf = NULL;
 
-	if (sdev->skip_vpd_pages)
+	if (!scsi_device_supports_vpd(sdev))
 		return;
+
 retry_pg0:
 	vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
 	if (!vpd_buf)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index f3d69a98c725..e97ddf0574c8 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -6,23 +6,15 @@
  *  anything out of the ordinary is seen.
  * ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  *
- *  This version is more generic, simulating a variable number of disk
- *  (or disk like devices) sharing a common amount of RAM. To be more
- *  realistic, the simulated devices have the transport attributes of
- *  SAS disks.
+ * Copyright (C) 2001 - 2016 Douglas Gilbert
  *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
  *
  *  For documentation see http://sg.danny.cz/sg/sdebug26.html
  *
- *   D. Gilbert (dpg) work for Magneto-Optical device test [20010421]
- *   dpg: work for devfs large number of disks [20010809]
- *        forked for lk 2.5 series [20011216, 20020101]
- *        use vmalloc() more inquiry+mode_sense [20020302]
- *        add timers for delayed responses [20020721]
- *   Patrick Mansfield <patmans@us.ibm.com> max_luns+scsi_level [20021031]
- *   Mike Anderson <andmike@us.ibm.com> sysfs work [20021118]
- *   dpg: change style of boot options to "scsi_debug.num_tgts=2" and
- *        module options to "modprobe scsi_debug num_tgts=2" [20021221]
  */
 
 
@@ -32,7 +24,7 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/timer.h>
+#include <linux/jiffies.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/string.h>
@@ -66,8 +58,9 @@
 #include "sd.h"
 #include "scsi_logging.h"
 
-#define SCSI_DEBUG_VERSION "1.85"
-static const char *scsi_debug_version_date = "20141022";
+/* make sure inq_product_rev string corresponds to this version */
+#define SDEBUG_VERSION "1.86"
+static const char *sdebug_version_date = "20160430";
 
 #define MY_NAME "scsi_debug"
 
@@ -102,7 +95,6 @@ static const char *scsi_debug_version_date = "20141022";
 /* Additional Sense Code Qualifier (ASCQ) */
 #define ACK_NAK_TO 0x3
 
-
 /* Default values for driver parameters */
 #define DEF_NUM_HOST   1
 #define DEF_NUM_TGTS   1
@@ -111,7 +103,7 @@ static const char *scsi_debug_version_date = "20141022";
  * (id 0) containing 1 logical unit (lun 0). That is 1 device.
  */
 #define DEF_ATO 1
-#define DEF_DELAY   1		/* if > 0 unit is a jiffy */
+#define DEF_JDELAY   1		/* if > 0 unit is a jiffy */
 #define DEF_DEV_SIZE_MB   8
 #define DEF_DIF 0
 #define DEF_DIX 0
@@ -131,7 +123,7 @@ static const char *scsi_debug_version_date = "20141022";
 #define DEF_OPTS   0
 #define DEF_OPT_BLKS 1024
 #define DEF_PHYSBLK_EXP 0
-#define DEF_PTYPE   0
+#define DEF_PTYPE   TYPE_DISK
 #define DEF_REMOVABLE false
 #define DEF_SCSI_LEVEL   6    /* INQUIRY, byte2 [6->SPC-4] */
 #define DEF_SECTOR_SIZE 512
@@ -143,43 +135,51 @@ static const char *scsi_debug_version_date = "20141022";
 #define DEF_VPD_USE_HOSTNO 1
 #define DEF_WRITESAME_LENGTH 0xFFFF
 #define DEF_STRICT 0
-#define DELAY_OVERRIDDEN -9999
-
-/* bit mask values for scsi_debug_opts */
-#define SCSI_DEBUG_OPT_NOISE   1
-#define SCSI_DEBUG_OPT_MEDIUM_ERR   2
-#define SCSI_DEBUG_OPT_TIMEOUT   4
-#define SCSI_DEBUG_OPT_RECOVERED_ERR   8
-#define SCSI_DEBUG_OPT_TRANSPORT_ERR   16
-#define SCSI_DEBUG_OPT_DIF_ERR   32
-#define SCSI_DEBUG_OPT_DIX_ERR   64
-#define SCSI_DEBUG_OPT_MAC_TIMEOUT  128
-#define SCSI_DEBUG_OPT_SHORT_TRANSFER	0x100
-#define SCSI_DEBUG_OPT_Q_NOISE	0x200
-#define SCSI_DEBUG_OPT_ALL_TSF	0x400
-#define SCSI_DEBUG_OPT_RARE_TSF	0x800
-#define SCSI_DEBUG_OPT_N_WCE	0x1000
-#define SCSI_DEBUG_OPT_RESET_NOISE 0x2000
-#define SCSI_DEBUG_OPT_NO_CDB_NOISE 0x4000
-#define SCSI_DEBUG_OPT_ALL_NOISE (0x1 | 0x200 | 0x2000)
+#define JDELAY_OVERRIDDEN -9999
+
+#define SDEBUG_LUN_0_VAL 0
+
+/* bit mask values for sdebug_opts */
+#define SDEBUG_OPT_NOISE		1
+#define SDEBUG_OPT_MEDIUM_ERR		2
+#define SDEBUG_OPT_TIMEOUT		4
+#define SDEBUG_OPT_RECOVERED_ERR	8
+#define SDEBUG_OPT_TRANSPORT_ERR	16
+#define SDEBUG_OPT_DIF_ERR		32
+#define SDEBUG_OPT_DIX_ERR		64
+#define SDEBUG_OPT_MAC_TIMEOUT		128
+#define SDEBUG_OPT_SHORT_TRANSFER	0x100
+#define SDEBUG_OPT_Q_NOISE		0x200
+#define SDEBUG_OPT_ALL_TSF		0x400
+#define SDEBUG_OPT_RARE_TSF		0x800
+#define SDEBUG_OPT_N_WCE		0x1000
+#define SDEBUG_OPT_RESET_NOISE		0x2000
+#define SDEBUG_OPT_NO_CDB_NOISE		0x4000
+#define SDEBUG_OPT_ALL_NOISE (SDEBUG_OPT_NOISE | SDEBUG_OPT_Q_NOISE | \
+			      SDEBUG_OPT_RESET_NOISE)
+#define SDEBUG_OPT_ALL_INJECTING (SDEBUG_OPT_RECOVERED_ERR | \
+				  SDEBUG_OPT_TRANSPORT_ERR | \
+				  SDEBUG_OPT_DIF_ERR | SDEBUG_OPT_DIX_ERR | \
+				  SDEBUG_OPT_SHORT_TRANSFER)
 /* When "every_nth" > 0 then modulo "every_nth" commands:
- *   - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
+ *   - a missing response is simulated if SDEBUG_OPT_TIMEOUT is set
  *   - a RECOVERED_ERROR is simulated on successful read and write
- *     commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ *     commands if SDEBUG_OPT_RECOVERED_ERR is set.
  *   - a TRANSPORT_ERROR is simulated on successful read and write
- *     commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
+ *     commands if SDEBUG_OPT_TRANSPORT_ERR is set.
  *
  * When "every_nth" < 0 then after "- every_nth" commands:
- *   - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
+ *   - a missing response is simulated if SDEBUG_OPT_TIMEOUT is set
  *   - a RECOVERED_ERROR is simulated on successful read and write
- *     commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ *     commands if SDEBUG_OPT_RECOVERED_ERR is set.
  *   - a TRANSPORT_ERROR is simulated on successful read and write
- *     commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
- * This will continue until some other action occurs (e.g. the user
- * writing a new value (other than -1 or 1) to every_nth via sysfs).
+ *     commands if _DEBUG_OPT_TRANSPORT_ERR is set.
+ * This will continue on every subsequent command until some other action
+ * occurs (e.g. the user * writing a new value (other than -1 or 1) to
+ * every_nth via sysfs).
  */
 
-/* As indicated in SAM-5 and SPC-4 Unit Attentions (UAs)are returned in
+/* As indicated in SAM-5 and SPC-4 Unit Attentions (UAs) are returned in
  * priority order. In the subset implemented here lower numbers have higher
  * priority. The UA numbers should be a sequence starting from 0 with
  * SDEBUG_NUM_UAS being 1 higher than the highest numbered UA. */
@@ -192,11 +192,7 @@ static const char *scsi_debug_version_date = "20141022";
 #define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 6
 #define SDEBUG_NUM_UAS 7
 
-/* for check_readiness() */
-#define UAS_ONLY 1	/* check for UAs only */
-#define UAS_TUR 0	/* if no UAs then check if media access possible */
-
-/* when 1==SCSI_DEBUG_OPT_MEDIUM_ERR, a medium error is simulated at this
+/* when 1==SDEBUG_OPT_MEDIUM_ERR, a medium error is simulated at this
  * sector on read commands: */
 #define OPT_MEDIUM_ERR_ADDR   0x1234 /* that's sector 4660 in decimal */
 #define OPT_MEDIUM_ERR_NUM    10     /* number of consecutive medium errs */
@@ -207,7 +203,7 @@ static const char *scsi_debug_version_date = "20141022";
 
 /* SCSI_DEBUG_CANQUEUE is the maximum number of commands that can be queued
  * (for response) at one time. Can be reduced by max_queue option. Command
- * responses are not queued when delay=0 and ndelay=0. The per-device
+ * responses are not queued when jdelay=0 and ndelay=0. The per-device
  * DEF_CMD_PER_LUN can be changed via sysfs:
  * /sys/class/scsi_device/<h:c:t:l>/device/queue_depth but cannot exceed
  * SCSI_DEBUG_CANQUEUE. */
@@ -219,7 +215,83 @@ static const char *scsi_debug_version_date = "20141022";
 #warning "Expect DEF_CMD_PER_LUN <= SCSI_DEBUG_CANQUEUE"
 #endif
 
-/* SCSI opcodes (first byte of cdb) mapped onto these indexes */
+#define F_D_IN			1
+#define F_D_OUT			2
+#define F_D_OUT_MAYBE		4	/* WRITE SAME, NDOB bit */
+#define F_D_UNKN		8
+#define F_RL_WLUN_OK		0x10
+#define F_SKIP_UA		0x20
+#define F_DELAY_OVERR		0x40
+#define F_SA_LOW		0x80	/* cdb byte 1, bits 4 to 0 */
+#define F_SA_HIGH		0x100	/* as used by variable length cdbs */
+#define F_INV_OP		0x200
+#define F_FAKE_RW		0x400
+#define F_M_ACCESS		0x800	/* media access */
+
+#define FF_RESPOND (F_RL_WLUN_OK | F_SKIP_UA | F_DELAY_OVERR)
+#define FF_DIRECT_IO (F_M_ACCESS | F_FAKE_RW)
+#define FF_SA (F_SA_HIGH | F_SA_LOW)
+
+#define SDEBUG_MAX_PARTS 4
+
+#define SDEBUG_MAX_CMD_LEN 32
+
+
+struct sdebug_dev_info {
+	struct list_head dev_list;
+	unsigned int channel;
+	unsigned int target;
+	u64 lun;
+	struct sdebug_host_info *sdbg_host;
+	unsigned long uas_bm[1];
+	atomic_t num_in_q;
+	char stopped;		/* TODO: should be atomic */
+	bool used;
+};
+
+struct sdebug_host_info {
+	struct list_head host_list;
+	struct Scsi_Host *shost;
+	struct device dev;
+	struct list_head dev_info_list;
+};
+
+#define to_sdebug_host(d)	\
+	container_of(d, struct sdebug_host_info, dev)
+
+struct sdebug_defer {
+	struct hrtimer hrt;
+	struct execute_work ew;
+	int qa_indx;
+};
+
+struct sdebug_queued_cmd {
+	/* in_use flagged by a bit in queued_in_use_bm[] */
+	struct sdebug_defer *sd_dp;
+	struct scsi_cmnd *a_cmnd;
+};
+
+struct sdebug_scmd_extra_t {
+	bool inj_recovered;
+	bool inj_transport;
+	bool inj_dif;
+	bool inj_dix;
+	bool inj_short;
+};
+
+struct opcode_info_t {
+	u8 num_attached;	/* 0 if this is it (i.e. a leaf); use 0xff */
+				/* for terminating element */
+	u8 opcode;		/* if num_attached > 0, preferred */
+	u16 sa;			/* service action */
+	u32 flags;		/* OR-ed set of SDEB_F_* */
+	int (*pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
+	const struct opcode_info_t *arrp;  /* num_attached elements or NULL */
+	u8 len_mask[16];	/* len=len_mask[0], then mask for cdb[1]... */
+				/* ignore cdb bytes after position 15 */
+};
+
+/* SCSI opcodes (first byte of cdb) of interest mapped onto these indexes */
 enum sdeb_opcode_index {
 	SDEB_I_INVALID_OPCODE =	0,
 	SDEB_I_INQUIRY = 1,
@@ -274,7 +346,7 @@ static const unsigned char opcode_ind_arr[256] = {
 	0, 0, 0, SDEB_I_XDWRITEREAD, 0, SDEB_I_MODE_SELECT, SDEB_I_RESERVE,
 	    SDEB_I_RELEASE,
 	0, 0, SDEB_I_MODE_SENSE, 0, 0, 0, 0, 0,
-/* 0x60; 0x60->0x7d are reserved */
+/* 0x60; 0x60->0x7d are reserved, 0x7e is "extended cdb" */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, SDEB_I_VARIABLE_LEN,
@@ -297,24 +369,6 @@ static const unsigned char opcode_ind_arr[256] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 };
 
-#define F_D_IN			1
-#define F_D_OUT			2
-#define F_D_OUT_MAYBE		4	/* WRITE SAME, NDOB bit */
-#define F_D_UNKN		8
-#define F_RL_WLUN_OK		0x10
-#define F_SKIP_UA		0x20
-#define F_DELAY_OVERR		0x40
-#define F_SA_LOW		0x80	/* cdb byte 1, bits 4 to 0 */
-#define F_SA_HIGH		0x100	/* as used by variable length cdbs */
-#define F_INV_OP		0x200
-#define F_FAKE_RW		0x400
-#define F_M_ACCESS		0x800	/* media access */
-
-#define FF_RESPOND (F_RL_WLUN_OK | F_SKIP_UA | F_DELAY_OVERR)
-#define FF_DIRECT_IO (F_M_ACCESS | F_FAKE_RW)
-#define FF_SA (F_SA_HIGH | F_SA_LOW)
-
-struct sdebug_dev_info;
 static int resp_inquiry(struct scsi_cmnd *, struct sdebug_dev_info *);
 static int resp_report_luns(struct scsi_cmnd *, struct sdebug_dev_info *);
 static int resp_requests(struct scsi_cmnd *, struct sdebug_dev_info *);
@@ -337,18 +391,6 @@ static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *);
 static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *);
 static int resp_write_buffer(struct scsi_cmnd *, struct sdebug_dev_info *);
 
-struct opcode_info_t {
-	u8 num_attached;	/* 0 if this is it (i.e. a leaf); use 0xff
-				 * for terminating element */
-	u8 opcode;		/* if num_attached > 0, preferred */
-	u16 sa;			/* service action */
-	u32 flags;		/* OR-ed set of SDEB_F_* */
-	int (*pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
-	const struct opcode_info_t *arrp;  /* num_attached elements or NULL */
-	u8 len_mask[16];	/* len=len_mask[0], then mask for cdb[1]... */
-				/* ignore cdb bytes after position 15 */
-};
-
 static const struct opcode_info_t msense_iarr[1] = {
 	{0, 0x1a, 0, F_D_IN, NULL, NULL,
 	    {6,  0xe8, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
@@ -509,62 +551,54 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
 	    {0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
 };
 
-struct sdebug_scmd_extra_t {
-	bool inj_recovered;
-	bool inj_transport;
-	bool inj_dif;
-	bool inj_dix;
-	bool inj_short;
-};
-
-static int scsi_debug_add_host = DEF_NUM_HOST;
-static int scsi_debug_ato = DEF_ATO;
-static int scsi_debug_delay = DEF_DELAY;
-static int scsi_debug_dev_size_mb = DEF_DEV_SIZE_MB;
-static int scsi_debug_dif = DEF_DIF;
-static int scsi_debug_dix = DEF_DIX;
-static int scsi_debug_dsense = DEF_D_SENSE;
-static int scsi_debug_every_nth = DEF_EVERY_NTH;
-static int scsi_debug_fake_rw = DEF_FAKE_RW;
-static unsigned int scsi_debug_guard = DEF_GUARD;
-static int scsi_debug_lowest_aligned = DEF_LOWEST_ALIGNED;
-static int scsi_debug_max_luns = DEF_MAX_LUNS;
-static int scsi_debug_max_queue = SCSI_DEBUG_CANQUEUE;
+static int sdebug_add_host = DEF_NUM_HOST;
+static int sdebug_ato = DEF_ATO;
+static int sdebug_jdelay = DEF_JDELAY;	/* if > 0 then unit is jiffies */
+static int sdebug_dev_size_mb = DEF_DEV_SIZE_MB;
+static int sdebug_dif = DEF_DIF;
+static int sdebug_dix = DEF_DIX;
+static int sdebug_dsense = DEF_D_SENSE;
+static int sdebug_every_nth = DEF_EVERY_NTH;
+static int sdebug_fake_rw = DEF_FAKE_RW;
+static unsigned int sdebug_guard = DEF_GUARD;
+static int sdebug_lowest_aligned = DEF_LOWEST_ALIGNED;
+static int sdebug_max_luns = DEF_MAX_LUNS;
+static int sdebug_max_queue = SCSI_DEBUG_CANQUEUE;
 static atomic_t retired_max_queue;	/* if > 0 then was prior max_queue */
-static int scsi_debug_ndelay = DEF_NDELAY;
-static int scsi_debug_no_lun_0 = DEF_NO_LUN_0;
-static int scsi_debug_no_uld = 0;
-static int scsi_debug_num_parts = DEF_NUM_PARTS;
-static int scsi_debug_num_tgts = DEF_NUM_TGTS; /* targets per host */
-static int scsi_debug_opt_blks = DEF_OPT_BLKS;
-static int scsi_debug_opts = DEF_OPTS;
-static int scsi_debug_physblk_exp = DEF_PHYSBLK_EXP;
-static int scsi_debug_ptype = DEF_PTYPE; /* SCSI peripheral type (0==disk) */
-static int scsi_debug_scsi_level = DEF_SCSI_LEVEL;
-static int scsi_debug_sector_size = DEF_SECTOR_SIZE;
-static int scsi_debug_virtual_gb = DEF_VIRTUAL_GB;
-static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO;
-static unsigned int scsi_debug_lbpu = DEF_LBPU;
-static unsigned int scsi_debug_lbpws = DEF_LBPWS;
-static unsigned int scsi_debug_lbpws10 = DEF_LBPWS10;
-static unsigned int scsi_debug_lbprz = DEF_LBPRZ;
-static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
-static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
-static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
-static unsigned int scsi_debug_unmap_max_desc = DEF_UNMAP_MAX_DESC;
-static unsigned int scsi_debug_write_same_length = DEF_WRITESAME_LENGTH;
-static bool scsi_debug_removable = DEF_REMOVABLE;
-static bool scsi_debug_clustering;
-static bool scsi_debug_host_lock = DEF_HOST_LOCK;
-static bool scsi_debug_strict = DEF_STRICT;
+static int sdebug_ndelay = DEF_NDELAY;	/* if > 0 then unit is nanoseconds */
+static int sdebug_no_lun_0 = DEF_NO_LUN_0;
+static int sdebug_no_uld;
+static int sdebug_num_parts = DEF_NUM_PARTS;
+static int sdebug_num_tgts = DEF_NUM_TGTS; /* targets per host */
+static int sdebug_opt_blks = DEF_OPT_BLKS;
+static int sdebug_opts = DEF_OPTS;
+static int sdebug_physblk_exp = DEF_PHYSBLK_EXP;
+static int sdebug_ptype = DEF_PTYPE; /* SCSI peripheral device type */
+static int sdebug_scsi_level = DEF_SCSI_LEVEL;
+static int sdebug_sector_size = DEF_SECTOR_SIZE;
+static int sdebug_virtual_gb = DEF_VIRTUAL_GB;
+static int sdebug_vpd_use_hostno = DEF_VPD_USE_HOSTNO;
+static unsigned int sdebug_lbpu = DEF_LBPU;
+static unsigned int sdebug_lbpws = DEF_LBPWS;
+static unsigned int sdebug_lbpws10 = DEF_LBPWS10;
+static unsigned int sdebug_lbprz = DEF_LBPRZ;
+static unsigned int sdebug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
+static unsigned int sdebug_unmap_granularity = DEF_UNMAP_GRANULARITY;
+static unsigned int sdebug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
+static unsigned int sdebug_unmap_max_desc = DEF_UNMAP_MAX_DESC;
+static unsigned int sdebug_write_same_length = DEF_WRITESAME_LENGTH;
+static bool sdebug_removable = DEF_REMOVABLE;
+static bool sdebug_clustering;
+static bool sdebug_host_lock = DEF_HOST_LOCK;
+static bool sdebug_strict = DEF_STRICT;
 static bool sdebug_any_injecting_opt;
+static bool sdebug_verbose;
+static bool have_dif_prot;
 
 static atomic_t sdebug_cmnd_count;
 static atomic_t sdebug_completions;
 static atomic_t sdebug_a_tsf;		/* counter of 'almost' TSFs */
 
-#define DEV_READONLY(TGT)      (0)
-
 static unsigned int sdebug_store_sectors;
 static sector_t sdebug_capacity;	/* in sectors */
 
@@ -574,59 +608,10 @@ static int sdebug_heads;		/* heads per disk */
 static int sdebug_cylinders_per;	/* cylinders per surface */
 static int sdebug_sectors_per;		/* sectors per cylinder */
 
-#define SDEBUG_MAX_PARTS 4
-
-#define SCSI_DEBUG_MAX_CMD_LEN 32
-
-static unsigned int scsi_debug_lbp(void)
-{
-	return ((0 == scsi_debug_fake_rw) &&
-		(scsi_debug_lbpu | scsi_debug_lbpws | scsi_debug_lbpws10));
-}
-
-struct sdebug_dev_info {
-	struct list_head dev_list;
-	unsigned int channel;
-	unsigned int target;
-	u64 lun;
-	struct sdebug_host_info *sdbg_host;
-	unsigned long uas_bm[1];
-	atomic_t num_in_q;
-	char stopped;		/* TODO: should be atomic */
-	bool used;
-};
-
-struct sdebug_host_info {
-	struct list_head host_list;
-	struct Scsi_Host *shost;
-	struct device dev;
-	struct list_head dev_info_list;
-};
-
-#define to_sdebug_host(d)	\
-	container_of(d, struct sdebug_host_info, dev)
-
 static LIST_HEAD(sdebug_host_list);
 static DEFINE_SPINLOCK(sdebug_host_list_lock);
 
-
-struct sdebug_hrtimer {		/* ... is derived from hrtimer */
-	struct hrtimer hrt;	/* must be first element */
-	int qa_indx;
-};
-
-struct sdebug_queued_cmd {
-	/* in_use flagged by a bit in queued_in_use_bm[] */
-	struct timer_list *cmnd_timerp;
-	struct tasklet_struct *tletp;
-	struct sdebug_hrtimer *sd_hrtp;
-	struct scsi_cmnd * a_cmnd;
-};
-static struct sdebug_queued_cmd queued_arr[SCSI_DEBUG_CANQUEUE];
-static unsigned long queued_in_use_bm[SCSI_DEBUG_CANQUEUE_WORDS];
-
-
-static unsigned char * fake_storep;	/* ramdisk storage */
+static unsigned char *fake_storep;	/* ramdisk storage */
 static struct sd_dif_tuple *dif_storep;	/* protection info */
 static void *map_storep;		/* provisioning map */
 
@@ -640,6 +625,9 @@ static int dix_writes;
 static int dix_reads;
 static int dif_errors;
 
+static struct sdebug_queued_cmd queued_arr[SCSI_DEBUG_CANQUEUE];
+static unsigned long queued_in_use_bm[SCSI_DEBUG_CANQUEUE_WORDS];
+
 static DEFINE_SPINLOCK(queued_arr_lock);
 static DEFINE_RWLOCK(atomic_rw);
 
@@ -662,19 +650,18 @@ static const int illegal_condition_result =
 static const int device_qfull_result =
 	(DID_OK << 16) | (COMMAND_COMPLETE << 8) | SAM_STAT_TASK_SET_FULL;
 
-static unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
-				     0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0,
-				     0, 0, 0, 0};
-static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
-				    0, 0, 0x2, 0x4b};
-static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
-			           0, 0, 0x0, 0x0};
+
+static inline unsigned int scsi_debug_lbp(void)
+{
+	return 0 == sdebug_fake_rw &&
+		(sdebug_lbpu || sdebug_lbpws || sdebug_lbpws10);
+}
 
 static void *fake_store(unsigned long long lba)
 {
 	lba = do_div(lba, sdebug_store_sectors);
 
-	return fake_storep + lba * scsi_debug_sector_size;
+	return fake_storep + lba * sdebug_sector_size;
 }
 
 static struct sd_dif_tuple *dif_store(sector_t sector)
@@ -684,9 +671,6 @@ static struct sd_dif_tuple *dif_store(sector_t sector)
 	return dif_storep + sector;
 }
 
-static int sdebug_add_adapter(void);
-static void sdebug_remove_adapter(void);
-
 static void sdebug_max_tgts_luns(void)
 {
 	struct sdebug_host_info *sdbg_host;
@@ -696,11 +680,11 @@ static void sdebug_max_tgts_luns(void)
 	list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
 		hpnt = sdbg_host->shost;
 		if ((hpnt->this_id >= 0) &&
-		    (scsi_debug_num_tgts > hpnt->this_id))
-			hpnt->max_id = scsi_debug_num_tgts + 1;
+		    (sdebug_num_tgts > hpnt->this_id))
+			hpnt->max_id = sdebug_num_tgts + 1;
 		else
-			hpnt->max_id = scsi_debug_num_tgts;
-		/* scsi_debug_max_luns; */
+			hpnt->max_id = sdebug_num_tgts;
+		/* sdebug_max_luns; */
 		hpnt->max_lun = SCSI_W_LUN_REPORT_LUNS + 1;
 	}
 	spin_unlock(&sdebug_host_list_lock);
@@ -709,9 +693,9 @@ static void sdebug_max_tgts_luns(void)
 enum sdeb_cmd_data {SDEB_IN_DATA = 0, SDEB_IN_CDB = 1};
 
 /* Set in_bit to -1 to indicate no bit position of invalid field */
-static void
-mk_sense_invalid_fld(struct scsi_cmnd *scp, enum sdeb_cmd_data c_d,
-		     int in_byte, int in_bit)
+static void mk_sense_invalid_fld(struct scsi_cmnd *scp,
+				 enum sdeb_cmd_data c_d,
+				 int in_byte, int in_bit)
 {
 	unsigned char *sbuff;
 	u8 sks[4];
@@ -725,8 +709,7 @@ mk_sense_invalid_fld(struct scsi_cmnd *scp, enum sdeb_cmd_data c_d,
 	}
 	asc = c_d ? INVALID_FIELD_IN_CDB : INVALID_FIELD_IN_PARAM_LIST;
 	memset(sbuff, 0, SCSI_SENSE_BUFFERSIZE);
-	scsi_build_sense_buffer(scsi_debug_dsense, sbuff, ILLEGAL_REQUEST,
-				asc, 0);
+	scsi_build_sense_buffer(sdebug_dsense, sbuff, ILLEGAL_REQUEST, asc, 0);
 	memset(sks, 0, sizeof(sks));
 	sks[0] = 0x80;
 	if (c_d)
@@ -736,7 +719,7 @@ mk_sense_invalid_fld(struct scsi_cmnd *scp, enum sdeb_cmd_data c_d,
 		sks[0] |= 0x7 & in_bit;
 	}
 	put_unaligned_be16(in_byte, sks + 1);
-	if (scsi_debug_dsense) {
+	if (sdebug_dsense) {
 		sl = sbuff[7] + 8;
 		sbuff[7] = sl;
 		sbuff[sl] = 0x2;
@@ -744,7 +727,7 @@ mk_sense_invalid_fld(struct scsi_cmnd *scp, enum sdeb_cmd_data c_d,
 		memcpy(sbuff + sl + 4, sks, 3);
 	} else
 		memcpy(sbuff + 15, sks, 3);
-	if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+	if (sdebug_verbose)
 		sdev_printk(KERN_INFO, scp->device, "%s:  [sense_key,asc,ascq"
 			    "]: [0x5,0x%x,0x0] %c byte=%d, bit=%d\n",
 			    my_name, asc, c_d ? 'C' : 'D', in_byte, in_bit);
@@ -762,23 +745,22 @@ static void mk_sense_buffer(struct scsi_cmnd *scp, int key, int asc, int asq)
 	}
 	memset(sbuff, 0, SCSI_SENSE_BUFFERSIZE);
 
-	scsi_build_sense_buffer(scsi_debug_dsense, sbuff, key, asc, asq);
+	scsi_build_sense_buffer(sdebug_dsense, sbuff, key, asc, asq);
 
-	if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+	if (sdebug_verbose)
 		sdev_printk(KERN_INFO, scp->device,
 			    "%s:  [sense_key,asc,ascq]: [0x%x,0x%x,0x%x]\n",
 			    my_name, key, asc, asq);
 }
 
-static void
-mk_sense_invalid_opcode(struct scsi_cmnd *scp)
+static void mk_sense_invalid_opcode(struct scsi_cmnd *scp)
 {
 	mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_OPCODE, 0);
 }
 
 static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
 {
-	if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) {
+	if (sdebug_verbose) {
 		if (0x1261 == cmd)
 			sdev_printk(KERN_INFO, dev,
 				    "%s: BLKFLSBUF [0x1261]\n", __func__);
@@ -810,11 +792,9 @@ static void clear_luns_changed_on_target(struct sdebug_dev_info *devip)
 	spin_unlock(&sdebug_host_list_lock);
 }
 
-static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
-			   struct sdebug_dev_info * devip)
+static int make_ua(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 {
 	int k;
-	bool debug = !!(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts);
 
 	k = find_first_bit(devip->uas_bm, SDEBUG_NUM_UAS);
 	if (k != SDEBUG_NUM_UAS) {
@@ -822,40 +802,41 @@ static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
 
 		switch (k) {
 		case SDEBUG_UA_POR:
-			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
-					UA_RESET_ASC, POWER_ON_RESET_ASCQ);
-			if (debug)
+			mk_sense_buffer(scp, UNIT_ATTENTION, UA_RESET_ASC,
+					POWER_ON_RESET_ASCQ);
+			if (sdebug_verbose)
 				cp = "power on reset";
 			break;
 		case SDEBUG_UA_BUS_RESET:
-			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
-					UA_RESET_ASC, BUS_RESET_ASCQ);
-			if (debug)
+			mk_sense_buffer(scp, UNIT_ATTENTION, UA_RESET_ASC,
+					BUS_RESET_ASCQ);
+			if (sdebug_verbose)
 				cp = "bus reset";
 			break;
 		case SDEBUG_UA_MODE_CHANGED:
-			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
-					UA_CHANGED_ASC, MODE_CHANGED_ASCQ);
-			if (debug)
+			mk_sense_buffer(scp, UNIT_ATTENTION, UA_CHANGED_ASC,
+					MODE_CHANGED_ASCQ);
+			if (sdebug_verbose)
 				cp = "mode parameters changed";
 			break;
 		case SDEBUG_UA_CAPACITY_CHANGED:
-			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
-					UA_CHANGED_ASC, CAPACITY_CHANGED_ASCQ);
-			if (debug)
+			mk_sense_buffer(scp, UNIT_ATTENTION, UA_CHANGED_ASC,
+					CAPACITY_CHANGED_ASCQ);
+			if (sdebug_verbose)
 				cp = "capacity data changed";
 			break;
 		case SDEBUG_UA_MICROCODE_CHANGED:
-			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
-				 TARGET_CHANGED_ASC, MICROCODE_CHANGED_ASCQ);
-			if (debug)
+			mk_sense_buffer(scp, UNIT_ATTENTION,
+					TARGET_CHANGED_ASC,
+					MICROCODE_CHANGED_ASCQ);
+			if (sdebug_verbose)
 				cp = "microcode has been changed";
 			break;
 		case SDEBUG_UA_MICROCODE_CHANGED_WO_RESET:
-			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+			mk_sense_buffer(scp, UNIT_ATTENTION,
 					TARGET_CHANGED_ASC,
 					MICROCODE_CHANGED_WO_RESET_ASCQ);
-			if (debug)
+			if (sdebug_verbose)
 				cp = "microcode has been changed without reset";
 			break;
 		case SDEBUG_UA_LUNS_CHANGED:
@@ -864,40 +845,30 @@ static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
 			 * ASC/ASCQ REPORTED LUNS DATA HAS CHANGED on every LUN
 			 * on the target, until a REPORT LUNS command is
 			 * received.  SPC-4 behavior is to report it only once.
-			 * NOTE:  scsi_debug_scsi_level does not use the same
+			 * NOTE:  sdebug_scsi_level does not use the same
 			 * values as struct scsi_device->scsi_level.
 			 */
-			if (scsi_debug_scsi_level >= 6)	/* SPC-4 and above */
+			if (sdebug_scsi_level >= 6)	/* SPC-4 and above */
 				clear_luns_changed_on_target(devip);
-			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+			mk_sense_buffer(scp, UNIT_ATTENTION,
 					TARGET_CHANGED_ASC,
 					LUNS_CHANGED_ASCQ);
-			if (debug)
+			if (sdebug_verbose)
 				cp = "reported luns data has changed";
 			break;
 		default:
-			pr_warn("%s: unexpected unit attention code=%d\n",
-				__func__, k);
-			if (debug)
+			pr_warn("unexpected unit attention code=%d\n", k);
+			if (sdebug_verbose)
 				cp = "unknown";
 			break;
 		}
 		clear_bit(k, devip->uas_bm);
-		if (debug)
-			sdev_printk(KERN_INFO, SCpnt->device,
+		if (sdebug_verbose)
+			sdev_printk(KERN_INFO, scp->device,
 				   "%s reports: Unit attention: %s\n",
 				   my_name, cp);
 		return check_condition_result;
 	}
-	if ((UAS_TUR == uas_only) && devip->stopped) {
-		mk_sense_buffer(SCpnt, NOT_READY, LOGICAL_UNIT_NOT_READY,
-				0x2);
-		if (debug)
-			sdev_printk(KERN_INFO, SCpnt->device,
-				    "%s reports: Not ready: %s\n", my_name,
-				    "initializing command required");
-		return check_condition_result;
-	}
 	return 0;
 }
 
@@ -911,7 +882,7 @@ static int fill_from_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
 	if (!sdb->length)
 		return 0;
 	if (!(scsi_bidi_cmnd(scp) || scp->sc_data_direction == DMA_FROM_DEVICE))
-		return (DID_ERROR << 16);
+		return DID_ERROR << 16;
 
 	act_len = sg_copy_from_buffer(sdb->table.sgl, sdb->table.nents,
 				      arr, arr_len);
@@ -935,7 +906,10 @@ static int fetch_to_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
 
 static const char * inq_vendor_id = "Linux   ";
 static const char * inq_product_id = "scsi_debug      ";
-static const char *inq_product_rev = "0184";	/* version less '.' */
+static const char *inq_product_rev = "0186";	/* version less '.' */
+static const u64 naa5_comp_a = 0x5222222000000000ULL;
+static const u64 naa5_comp_b = 0x5333333000000000ULL;
+static const u64 naa5_comp_c = 0x5111111000000000ULL;
 
 /* Device identification VPD page. Returns number of bytes placed in arr */
 static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
@@ -963,14 +937,8 @@ static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
 		arr[num++] = 0x3;	/* PIV=0, lu, naa */
 		arr[num++] = 0x0;
 		arr[num++] = 0x8;
-		arr[num++] = 0x53;  /* naa-5 ieee company id=0x333333 (fake) */
-		arr[num++] = 0x33;
-		arr[num++] = 0x33;
-		arr[num++] = 0x30;
-		arr[num++] = (dev_id_num >> 24);
-		arr[num++] = (dev_id_num >> 16) & 0xff;
-		arr[num++] = (dev_id_num >> 8) & 0xff;
-		arr[num++] = dev_id_num & 0xff;
+		put_unaligned_be64(naa5_comp_b + dev_id_num, arr + num);
+		num += 8;
 		/* Target relative port number */
 		arr[num++] = 0x61;	/* proto=sas, binary */
 		arr[num++] = 0x94;	/* PIV=1, target port, rel port */
@@ -986,14 +954,8 @@ static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
 	arr[num++] = 0x93;	/* piv=1, target port, naa */
 	arr[num++] = 0x0;
 	arr[num++] = 0x8;
-	arr[num++] = 0x52;	/* naa-5, company id=0x222222 (fake) */
-	arr[num++] = 0x22;
-	arr[num++] = 0x22;
-	arr[num++] = 0x20;
-	arr[num++] = (port_a >> 24);
-	arr[num++] = (port_a >> 16) & 0xff;
-	arr[num++] = (port_a >> 8) & 0xff;
-	arr[num++] = port_a & 0xff;
+	put_unaligned_be64(naa5_comp_a + port_a, arr + num);
+	num += 8;
 	/* NAA-5, Target port group identifier */
 	arr[num++] = 0x61;	/* proto=sas, binary */
 	arr[num++] = 0x95;	/* piv=1, target port group id */
@@ -1001,21 +963,15 @@ static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
 	arr[num++] = 0x4;
 	arr[num++] = 0;
 	arr[num++] = 0;
-	arr[num++] = (port_group_id >> 8) & 0xff;
-	arr[num++] = port_group_id & 0xff;
+	put_unaligned_be16(port_group_id, arr + num);
+	num += 2;
 	/* NAA-5, Target device identifier */
 	arr[num++] = 0x61;	/* proto=sas, binary */
 	arr[num++] = 0xa3;	/* piv=1, target device, naa */
 	arr[num++] = 0x0;
 	arr[num++] = 0x8;
-	arr[num++] = 0x52;	/* naa-5, company id=0x222222 (fake) */
-	arr[num++] = 0x22;
-	arr[num++] = 0x22;
-	arr[num++] = 0x20;
-	arr[num++] = (target_dev_id >> 24);
-	arr[num++] = (target_dev_id >> 16) & 0xff;
-	arr[num++] = (target_dev_id >> 8) & 0xff;
-	arr[num++] = target_dev_id & 0xff;
+	put_unaligned_be64(naa5_comp_a + target_dev_id, arr + num);
+	num += 8;
 	/* SCSI name string: Target device identifier */
 	arr[num++] = 0x63;	/* proto=sas, UTF-8 */
 	arr[num++] = 0xa8;	/* piv=1, target device, SCSI name string */
@@ -1031,7 +987,6 @@ static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
 	return num;
 }
 
-
 static unsigned char vpd84_data[] = {
 /* from 4th byte */ 0x22,0x22,0x22,0x0,0xbb,0x0,
     0x22,0x22,0x22,0x0,0xbb,0x1,
@@ -1101,15 +1056,8 @@ static int inquiry_evpd_88(unsigned char * arr, int target_dev_id)
 	arr[num++] = 0x93;	/* PIV=1, target port, NAA */
 	arr[num++] = 0x0;	/* reserved */
 	arr[num++] = 0x8;	/* length */
-	arr[num++] = 0x52;	/* NAA-5, company_id=0x222222 (fake) */
-	arr[num++] = 0x22;
-	arr[num++] = 0x22;
-	arr[num++] = 0x20;
-	arr[num++] = (port_a >> 24);
-	arr[num++] = (port_a >> 16) & 0xff;
-	arr[num++] = (port_a >> 8) & 0xff;
-	arr[num++] = port_a & 0xff;
-
+	put_unaligned_be64(naa5_comp_a + port_a, arr + num);
+	num += 8;
 	arr[num++] = 0x0;	/* reserved */
 	arr[num++] = 0x0;	/* reserved */
 	arr[num++] = 0x0;
@@ -1123,14 +1071,8 @@ static int inquiry_evpd_88(unsigned char * arr, int target_dev_id)
 	arr[num++] = 0x93;	/* PIV=1, target port, NAA */
 	arr[num++] = 0x0;	/* reserved */
 	arr[num++] = 0x8;	/* length */
-	arr[num++] = 0x52;	/* NAA-5, company_id=0x222222 (fake) */
-	arr[num++] = 0x22;
-	arr[num++] = 0x22;
-	arr[num++] = 0x20;
-	arr[num++] = (port_b >> 24);
-	arr[num++] = (port_b >> 16) & 0xff;
-	arr[num++] = (port_b >> 8) & 0xff;
-	arr[num++] = port_b & 0xff;
+	put_unaligned_be64(naa5_comp_a + port_b, arr + num);
+	num += 8;
 
 	return num;
 }
@@ -1203,40 +1145,35 @@ static int inquiry_evpd_b0(unsigned char * arr)
 	memcpy(arr, vpdb0_data, sizeof(vpdb0_data));
 
 	/* Optimal transfer length granularity */
-	gran = 1 << scsi_debug_physblk_exp;
-	arr[2] = (gran >> 8) & 0xff;
-	arr[3] = gran & 0xff;
+	gran = 1 << sdebug_physblk_exp;
+	put_unaligned_be16(gran, arr + 2);
 
 	/* Maximum Transfer Length */
-	if (sdebug_store_sectors > 0x400) {
-		arr[4] = (sdebug_store_sectors >> 24) & 0xff;
-		arr[5] = (sdebug_store_sectors >> 16) & 0xff;
-		arr[6] = (sdebug_store_sectors >> 8) & 0xff;
-		arr[7] = sdebug_store_sectors & 0xff;
-	}
+	if (sdebug_store_sectors > 0x400)
+		put_unaligned_be32(sdebug_store_sectors, arr + 4);
 
 	/* Optimal Transfer Length */
-	put_unaligned_be32(scsi_debug_opt_blks, &arr[8]);
+	put_unaligned_be32(sdebug_opt_blks, &arr[8]);
 
-	if (scsi_debug_lbpu) {
+	if (sdebug_lbpu) {
 		/* Maximum Unmap LBA Count */
-		put_unaligned_be32(scsi_debug_unmap_max_blocks, &arr[16]);
+		put_unaligned_be32(sdebug_unmap_max_blocks, &arr[16]);
 
 		/* Maximum Unmap Block Descriptor Count */
-		put_unaligned_be32(scsi_debug_unmap_max_desc, &arr[20]);
+		put_unaligned_be32(sdebug_unmap_max_desc, &arr[20]);
 	}
 
 	/* Unmap Granularity Alignment */
-	if (scsi_debug_unmap_alignment) {
-		put_unaligned_be32(scsi_debug_unmap_alignment, &arr[28]);
+	if (sdebug_unmap_alignment) {
+		put_unaligned_be32(sdebug_unmap_alignment, &arr[28]);
 		arr[28] |= 0x80; /* UGAVALID */
 	}
 
 	/* Optimal Unmap Granularity */
-	put_unaligned_be32(scsi_debug_unmap_granularity, &arr[24]);
+	put_unaligned_be32(sdebug_unmap_granularity, &arr[24]);
 
 	/* Maximum WRITE SAME Length */
-	put_unaligned_be64(scsi_debug_write_same_length, &arr[32]);
+	put_unaligned_be64(sdebug_write_same_length, &arr[32]);
 
 	return 0x3c; /* Mandatory page length for Logical Block Provisioning */
 
@@ -1261,16 +1198,16 @@ static int inquiry_evpd_b2(unsigned char *arr)
 	memset(arr, 0, 0x4);
 	arr[0] = 0;			/* threshold exponent */
 
-	if (scsi_debug_lbpu)
+	if (sdebug_lbpu)
 		arr[1] = 1 << 7;
 
-	if (scsi_debug_lbpws)
+	if (sdebug_lbpws)
 		arr[1] |= 1 << 6;
 
-	if (scsi_debug_lbpws10)
+	if (sdebug_lbpws10)
 		arr[1] |= 1 << 5;
 
-	if (scsi_debug_lbprz)
+	if (sdebug_lbprz)
 		arr[1] |= 1 << 2;
 
 	return 0x4;
@@ -1287,17 +1224,17 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	int alloc_len, n, ret;
 	bool have_wlun;
 
-	alloc_len = (cmd[3] << 8) + cmd[4];
+	alloc_len = get_unaligned_be16(cmd + 3);
 	arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
 	if (! arr)
 		return DID_REQUEUE << 16;
-	have_wlun = (scp->device->lun == SCSI_W_LUN_REPORT_LUNS);
+	have_wlun = scsi_is_wlun(scp->device->lun);
 	if (have_wlun)
-		pq_pdt = 0x1e;	/* present, wlun */
-	else if (scsi_debug_no_lun_0 && (0 == devip->lun))
-		pq_pdt = 0x7f;	/* not present, no device type */
+		pq_pdt = TYPE_WLUN;	/* present, wlun */
+	else if (sdebug_no_lun_0 && (devip->lun == SDEBUG_LUN_0_VAL))
+		pq_pdt = 0x7f;	/* not present, PQ=3, PDT=0x1f */
 	else
-		pq_pdt = (scsi_debug_ptype & 0x1f);
+		pq_pdt = (sdebug_ptype & 0x1f);
 	arr[0] = pq_pdt;
 	if (0x2 & cmd[1]) {  /* CMDDT bit set */
 		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 1);
@@ -1310,7 +1247,7 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		
 		port_group_id = (((host_no + 1) & 0x7f) << 8) +
 		    (devip->channel & 0x7f);
-		if (0 == scsi_debug_vpd_use_hostno)
+		if (sdebug_vpd_use_hostno == 0)
 			host_no = 0;
 		lu_id_num = have_wlun ? -1 : (((host_no + 1) * 2000) +
 			    (devip->target * 1000) + devip->lun);
@@ -1352,9 +1289,9 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		} else if (0x86 == cmd[2]) { /* extended inquiry */
 			arr[1] = cmd[2];	/*sanity */
 			arr[3] = 0x3c;	/* number of following entries */
-			if (scsi_debug_dif == SD_DIF_TYPE3_PROTECTION)
+			if (sdebug_dif == SD_DIF_TYPE3_PROTECTION)
 				arr[4] = 0x4;	/* SPT: GRD_CHK:1 */
-			else if (scsi_debug_dif)
+			else if (sdebug_dif)
 				arr[4] = 0x5;   /* SPT: GRD_CHK:1, REF_CHK:1 */
 			else
 				arr[4] = 0x0;   /* no protection stuff */
@@ -1372,8 +1309,7 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		} else if (0x89 == cmd[2]) { /* ATA information */
 			arr[1] = cmd[2];        /*sanity */
 			n = inquiry_evpd_89(&arr[4]);
-			arr[2] = (n >> 8);
-			arr[3] = (n & 0xff);
+			put_unaligned_be16(n, arr + 2);
 		} else if (0xb0 == cmd[2]) { /* Block limits (SBC) */
 			arr[1] = cmd[2];        /*sanity */
 			arr[3] = inquiry_evpd_b0(&arr[4]);
@@ -1388,19 +1324,19 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 			kfree(arr);
 			return check_condition_result;
 		}
-		len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
+		len = min(get_unaligned_be16(arr + 2) + 4, alloc_len);
 		ret = fill_from_dev_buffer(scp, arr,
 			    min(len, SDEBUG_MAX_INQ_ARR_SZ));
 		kfree(arr);
 		return ret;
 	}
 	/* drops through here for a standard inquiry */
-	arr[1] = scsi_debug_removable ? 0x80 : 0;	/* Removable disk */
-	arr[2] = scsi_debug_scsi_level;
+	arr[1] = sdebug_removable ? 0x80 : 0;	/* Removable disk */
+	arr[2] = sdebug_scsi_level;
 	arr[3] = 2;    /* response_data_format==2 */
 	arr[4] = SDEBUG_LONG_INQ_SZ - 5;
-	arr[5] = scsi_debug_dif ? 1 : 0; /* PROTECT bit */
-	if (0 == scsi_debug_vpd_use_hostno)
+	arr[5] = (int)have_dif_prot;	/* PROTECT bit */
+	if (sdebug_vpd_use_hostno == 0)
 		arr[5] = 0x10; /* claim: implicit TGPS */
 	arr[6] = 0x10; /* claim: MultiP */
 	/* arr[6] |= 0x40; ... claim: EncServ (enclosure services) */
@@ -1412,9 +1348,9 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	arr[58] = 0x0; arr[59] = 0xa2;  /* SAM-5 rev 4 */
 	arr[60] = 0x4; arr[61] = 0x68;  /* SPC-4 rev 37 */
 	n = 62;
-	if (scsi_debug_ptype == 0) {
+	if (sdebug_ptype == TYPE_DISK) {
 		arr[n++] = 0x4; arr[n++] = 0xc5; /* SBC-4 rev 36 */
-	} else if (scsi_debug_ptype == 1) {
+	} else if (sdebug_ptype == TYPE_TAPE) {
 		arr[n++] = 0x5; arr[n++] = 0x25; /* SSC-4 rev 3 */
 	}
 	arr[n++] = 0x20; arr[n++] = 0xe6;  /* SPL-3 rev 7 */
@@ -1424,6 +1360,9 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	return ret;
 }
 
+static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
+				   0, 0, 0x0, 0x0};
+
 static int resp_requests(struct scsi_cmnd * scp,
 			 struct sdebug_dev_info * devip)
 {
@@ -1452,7 +1391,7 @@ static int resp_requests(struct scsi_cmnd * scp,
 		}
 	} else {
 		memcpy(arr, sbuff, SCSI_SENSE_BUFFERSIZE);
-		if (arr[0] >= 0x70 && dsense == scsi_debug_dsense)
+		if (arr[0] >= 0x70 && dsense == sdebug_dsense)
 			;	/* have sense and formats match */
 		else if (arr[0] <= 0x70) {
 			if (dsense) {
@@ -1504,9 +1443,11 @@ static int resp_start_stop(struct scsi_cmnd * scp,
 
 static sector_t get_sdebug_capacity(void)
 {
-	if (scsi_debug_virtual_gb > 0)
-		return (sector_t)scsi_debug_virtual_gb *
-			(1073741824 / scsi_debug_sector_size);
+	static const unsigned int gibibyte = 1073741824;
+
+	if (sdebug_virtual_gb > 0)
+		return (sector_t)sdebug_virtual_gb *
+			(gibibyte / sdebug_sector_size);
 	else
 		return sdebug_store_sectors;
 }
@@ -1523,18 +1464,10 @@ static int resp_readcap(struct scsi_cmnd * scp,
 	memset(arr, 0, SDEBUG_READCAP_ARR_SZ);
 	if (sdebug_capacity < 0xffffffff) {
 		capac = (unsigned int)sdebug_capacity - 1;
-		arr[0] = (capac >> 24);
-		arr[1] = (capac >> 16) & 0xff;
-		arr[2] = (capac >> 8) & 0xff;
-		arr[3] = capac & 0xff;
-	} else {
-		arr[0] = 0xff;
-		arr[1] = 0xff;
-		arr[2] = 0xff;
-		arr[3] = 0xff;
-	}
-	arr[6] = (scsi_debug_sector_size >> 8) & 0xff;
-	arr[7] = scsi_debug_sector_size & 0xff;
+		put_unaligned_be32(capac, arr + 0);
+	} else
+		put_unaligned_be32(0xffffffff, arr + 0);
+	put_unaligned_be16(sdebug_sector_size, arr + 6);
 	return fill_from_dev_buffer(scp, arr, SDEBUG_READCAP_ARR_SZ);
 }
 
@@ -1544,34 +1477,27 @@ static int resp_readcap16(struct scsi_cmnd * scp,
 {
 	unsigned char *cmd = scp->cmnd;
 	unsigned char arr[SDEBUG_READCAP16_ARR_SZ];
-	unsigned long long capac;
-	int k, alloc_len;
+	int alloc_len;
 
-	alloc_len = ((cmd[10] << 24) + (cmd[11] << 16) + (cmd[12] << 8)
-		     + cmd[13]);
+	alloc_len = get_unaligned_be32(cmd + 10);
 	/* following just in case virtual_gb changed */
 	sdebug_capacity = get_sdebug_capacity();
 	memset(arr, 0, SDEBUG_READCAP16_ARR_SZ);
-	capac = sdebug_capacity - 1;
-	for (k = 0; k < 8; ++k, capac >>= 8)
-		arr[7 - k] = capac & 0xff;
-	arr[8] = (scsi_debug_sector_size >> 24) & 0xff;
-	arr[9] = (scsi_debug_sector_size >> 16) & 0xff;
-	arr[10] = (scsi_debug_sector_size >> 8) & 0xff;
-	arr[11] = scsi_debug_sector_size & 0xff;
-	arr[13] = scsi_debug_physblk_exp & 0xf;
-	arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
+	put_unaligned_be64((u64)(sdebug_capacity - 1), arr + 0);
+	put_unaligned_be32(sdebug_sector_size, arr + 8);
+	arr[13] = sdebug_physblk_exp & 0xf;
+	arr[14] = (sdebug_lowest_aligned >> 8) & 0x3f;
 
 	if (scsi_debug_lbp()) {
 		arr[14] |= 0x80; /* LBPME */
-		if (scsi_debug_lbprz)
+		if (sdebug_lbprz)
 			arr[14] |= 0x40; /* LBPRZ */
 	}
 
-	arr[15] = scsi_debug_lowest_aligned & 0xff;
+	arr[15] = sdebug_lowest_aligned & 0xff;
 
-	if (scsi_debug_dif) {
-		arr[12] = (scsi_debug_dif - 1) << 1; /* P_TYPE */
+	if (sdebug_dif) {
+		arr[12] = (sdebug_dif - 1) << 1; /* P_TYPE */
 		arr[12] |= 1; /* PROT_EN */
 	}
 
@@ -1590,9 +1516,7 @@ static int resp_report_tgtpgs(struct scsi_cmnd * scp,
 	int n, ret, alen, rlen;
 	int port_group_a, port_group_b, port_a, port_b;
 
-	alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8)
-		+ cmd[9]);
-
+	alen = get_unaligned_be32(cmd + 6);
 	arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
 	if (! arr)
 		return DID_REQUEUE << 16;
@@ -1605,49 +1529,46 @@ static int resp_report_tgtpgs(struct scsi_cmnd * scp,
 	port_a = 0x1; /* relative port A */
 	port_b = 0x2; /* relative port B */
 	port_group_a = (((host_no + 1) & 0x7f) << 8) +
-	    (devip->channel & 0x7f);
+			(devip->channel & 0x7f);
 	port_group_b = (((host_no + 1) & 0x7f) << 8) +
-	    (devip->channel & 0x7f) + 0x80;
+			(devip->channel & 0x7f) + 0x80;
 
 	/*
 	 * The asymmetric access state is cycled according to the host_id.
 	 */
 	n = 4;
-	if (0 == scsi_debug_vpd_use_hostno) {
-	    arr[n++] = host_no % 3; /* Asymm access state */
-	    arr[n++] = 0x0F; /* claim: all states are supported */
+	if (sdebug_vpd_use_hostno == 0) {
+		arr[n++] = host_no % 3; /* Asymm access state */
+		arr[n++] = 0x0F; /* claim: all states are supported */
 	} else {
-	    arr[n++] = 0x0; /* Active/Optimized path */
-	    arr[n++] = 0x01; /* claim: only support active/optimized paths */
+		arr[n++] = 0x0; /* Active/Optimized path */
+		arr[n++] = 0x01; /* only support active/optimized paths */
 	}
-	arr[n++] = (port_group_a >> 8) & 0xff;
-	arr[n++] = port_group_a & 0xff;
+	put_unaligned_be16(port_group_a, arr + n);
+	n += 2;
 	arr[n++] = 0;    /* Reserved */
 	arr[n++] = 0;    /* Status code */
 	arr[n++] = 0;    /* Vendor unique */
 	arr[n++] = 0x1;  /* One port per group */
 	arr[n++] = 0;    /* Reserved */
 	arr[n++] = 0;    /* Reserved */
-	arr[n++] = (port_a >> 8) & 0xff;
-	arr[n++] = port_a & 0xff;
+	put_unaligned_be16(port_a, arr + n);
+	n += 2;
 	arr[n++] = 3;    /* Port unavailable */
 	arr[n++] = 0x08; /* claim: only unavailalbe paths are supported */
-	arr[n++] = (port_group_b >> 8) & 0xff;
-	arr[n++] = port_group_b & 0xff;
+	put_unaligned_be16(port_group_b, arr + n);
+	n += 2;
 	arr[n++] = 0;    /* Reserved */
 	arr[n++] = 0;    /* Status code */
 	arr[n++] = 0;    /* Vendor unique */
 	arr[n++] = 0x1;  /* One port per group */
 	arr[n++] = 0;    /* Reserved */
 	arr[n++] = 0;    /* Reserved */
-	arr[n++] = (port_b >> 8) & 0xff;
-	arr[n++] = port_b & 0xff;
+	put_unaligned_be16(port_b, arr + n);
+	n += 2;
 
 	rlen = n - 4;
-	arr[0] = (rlen >> 24) & 0xff;
-	arr[1] = (rlen >> 16) & 0xff;
-	arr[2] = (rlen >> 8) & 0xff;
-	arr[3] = rlen & 0xff;
+	put_unaligned_be32(rlen, arr + 0);
 
 	/*
 	 * Return the smallest value of either
@@ -1662,8 +1583,8 @@ static int resp_report_tgtpgs(struct scsi_cmnd * scp,
 	return ret;
 }
 
-static int
-resp_rsup_opcodes(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_rsup_opcodes(struct scsi_cmnd *scp,
+			     struct sdebug_dev_info *devip)
 {
 	bool rctd;
 	u8 reporting_opts, req_opcode, sdeb_i, supp;
@@ -1813,8 +1734,8 @@ resp_rsup_opcodes(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	return errsts;
 }
 
-static int
-resp_rsup_tmfs(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_rsup_tmfs(struct scsi_cmnd *scp,
+			  struct sdebug_dev_info *devip)
 {
 	bool repd;
 	u32 alloc_len, len;
@@ -1871,17 +1792,19 @@ static int resp_format_pg(unsigned char * p, int pcontrol, int target)
 				     0, 0, 0, 0, 0x40, 0, 0, 0};
 
 	memcpy(p, format_pg, sizeof(format_pg));
-	p[10] = (sdebug_sectors_per >> 8) & 0xff;
-	p[11] = sdebug_sectors_per & 0xff;
-	p[12] = (scsi_debug_sector_size >> 8) & 0xff;
-	p[13] = scsi_debug_sector_size & 0xff;
-	if (scsi_debug_removable)
+	put_unaligned_be16(sdebug_sectors_per, p + 10);
+	put_unaligned_be16(sdebug_sector_size, p + 12);
+	if (sdebug_removable)
 		p[20] |= 0x20; /* should agree with INQUIRY */
 	if (1 == pcontrol)
 		memset(p + 2, 0, sizeof(format_pg) - 2);
 	return sizeof(format_pg);
 }
 
+static unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
+				     0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0,
+				     0, 0, 0, 0};
+
 static int resp_caching_pg(unsigned char * p, int pcontrol, int target)
 { 	/* Caching page for mode_sense */
 	unsigned char ch_caching_pg[] = {/* 0x8, 18, */ 0x4, 0, 0, 0, 0, 0,
@@ -1889,7 +1812,7 @@ static int resp_caching_pg(unsigned char * p, int pcontrol, int target)
 	unsigned char d_caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
 		0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0,     0, 0, 0, 0};
 
-	if (SCSI_DEBUG_OPT_N_WCE & scsi_debug_opts)
+	if (SDEBUG_OPT_N_WCE & sdebug_opts)
 		caching_pg[2] &= ~0x4;	/* set WCE=0 (default WCE=1) */
 	memcpy(p, caching_pg, sizeof(caching_pg));
 	if (1 == pcontrol)
@@ -1899,6 +1822,9 @@ static int resp_caching_pg(unsigned char * p, int pcontrol, int target)
 	return sizeof(caching_pg);
 }
 
+static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
+				    0, 0, 0x2, 0x4b};
+
 static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target)
 { 	/* Control mode page for mode_sense */
 	unsigned char ch_ctrl_m_pg[] = {/* 0xa, 10, */ 0x6, 0, 0, 0, 0, 0,
@@ -1906,12 +1832,12 @@ static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target)
 	unsigned char d_ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
 				     0, 0, 0x2, 0x4b};
 
-	if (scsi_debug_dsense)
+	if (sdebug_dsense)
 		ctrl_m_pg[2] |= 0x4;
 	else
 		ctrl_m_pg[2] &= ~0x4;
 
-	if (scsi_debug_ato)
+	if (sdebug_ato)
 		ctrl_m_pg[5] |= 0x80; /* ATO=1 */
 
 	memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg));
@@ -1955,31 +1881,29 @@ static int resp_sas_pcd_m_spg(unsigned char * p, int pcontrol, int target,
 {	/* SAS phy control and discover mode page for mode_sense */
 	unsigned char sas_pcd_m_pg[] = {0x59, 0x1, 0, 0x64, 0, 0x6, 0, 2,
 		    0, 0, 0, 0, 0x10, 0x9, 0x8, 0x0,
-		    0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0,
-		    0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1,
+		    0, 0, 0, 0, 0, 0, 0, 0,	/* insert SAS addr */
+		    0, 0, 0, 0, 0, 0, 0, 0,	/* insert SAS addr */
 		    0x2, 0, 0, 0, 0, 0, 0, 0,
 		    0x88, 0x99, 0, 0, 0, 0, 0, 0,
 		    0, 0, 0, 0, 0, 0, 0, 0,
 		    0, 1, 0, 0, 0x10, 0x9, 0x8, 0x0,
-		    0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0,
-		    0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1,
+		    0, 0, 0, 0, 0, 0, 0, 0,	/* insert SAS addr */
+		    0, 0, 0, 0, 0, 0, 0, 0,	/* insert SAS addr */
 		    0x3, 0, 0, 0, 0, 0, 0, 0,
 		    0x88, 0x99, 0, 0, 0, 0, 0, 0,
 		    0, 0, 0, 0, 0, 0, 0, 0,
 		};
 	int port_a, port_b;
 
+	put_unaligned_be64(naa5_comp_a, sas_pcd_m_pg + 16);
+	put_unaligned_be64(naa5_comp_c + 1, sas_pcd_m_pg + 24);
+	put_unaligned_be64(naa5_comp_a, sas_pcd_m_pg + 64);
+	put_unaligned_be64(naa5_comp_c + 1, sas_pcd_m_pg + 72);
 	port_a = target_dev_id + 1;
 	port_b = port_a + 1;
 	memcpy(p, sas_pcd_m_pg, sizeof(sas_pcd_m_pg));
-	p[20] = (port_a >> 24);
-	p[21] = (port_a >> 16) & 0xff;
-	p[22] = (port_a >> 8) & 0xff;
-	p[23] = port_a & 0xff;
-	p[48 + 20] = (port_b >> 24);
-	p[48 + 21] = (port_b >> 16) & 0xff;
-	p[48 + 22] = (port_b >> 8) & 0xff;
-	p[48 + 23] = port_b & 0xff;
+	put_unaligned_be32(port_a, p + 20);
+	put_unaligned_be32(port_b, p + 48 + 20);
 	if (1 == pcontrol)
 		memset(p + 4, 0, sizeof(sas_pcd_m_pg) - 4);
 	return sizeof(sas_pcd_m_pg);
@@ -1999,13 +1923,13 @@ static int resp_sas_sha_m_spg(unsigned char * p, int pcontrol)
 
 #define SDEBUG_MAX_MSENSE_SZ 256
 
-static int
-resp_mode_sense(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_mode_sense(struct scsi_cmnd *scp,
+			   struct sdebug_dev_info *devip)
 {
 	unsigned char dbd, llbaa;
 	int pcontrol, pcode, subpcode, bd_len;
 	unsigned char dev_spec;
-	int k, alloc_len, msense_6, offset, len, target_dev_id;
+	int alloc_len, msense_6, offset, len, target_dev_id;
 	int target = scp->device->id;
 	unsigned char * ap;
 	unsigned char arr[SDEBUG_MAX_MSENSE_SZ];
@@ -2017,11 +1941,11 @@ resp_mode_sense(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	subpcode = cmd[3];
 	msense_6 = (MODE_SENSE == cmd[0]);
 	llbaa = msense_6 ? 0 : !!(cmd[1] & 0x10);
-	if ((0 == scsi_debug_ptype) && (0 == dbd))
+	if ((sdebug_ptype == TYPE_DISK) && (dbd == 0))
 		bd_len = llbaa ? 16 : 8;
 	else
 		bd_len = 0;
-	alloc_len = msense_6 ? cmd[4] : ((cmd[7] << 8) | cmd[8]);
+	alloc_len = msense_6 ? cmd[4] : get_unaligned_be16(cmd + 7);
 	memset(arr, 0, SDEBUG_MAX_MSENSE_SZ);
 	if (0x3 == pcontrol) {  /* Saving values not supported */
 		mk_sense_buffer(scp, ILLEGAL_REQUEST, SAVING_PARAMS_UNSUP, 0);
@@ -2029,9 +1953,9 @@ resp_mode_sense(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	}
 	target_dev_id = ((devip->sdbg_host->shost->host_no + 1) * 2000) +
 			(devip->target * 1000) - 3;
-	/* set DPOFUA bit for disks */
-	if (0 == scsi_debug_ptype)
-		dev_spec = (DEV_READONLY(target) ? 0x80 : 0x0) | 0x10;
+	/* for disks set DPOFUA bit and clear write protect (WP) bit */
+	if (sdebug_ptype == TYPE_DISK)
+		dev_spec = 0x10;	/* =0x90 if WP=1 implies read-only */
 	else
 		dev_spec = 0x0;
 	if (msense_6) {
@@ -2050,30 +1974,16 @@ resp_mode_sense(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		sdebug_capacity = get_sdebug_capacity();
 
 	if (8 == bd_len) {
-		if (sdebug_capacity > 0xfffffffe) {
-			ap[0] = 0xff;
-			ap[1] = 0xff;
-			ap[2] = 0xff;
-			ap[3] = 0xff;
-		} else {
-			ap[0] = (sdebug_capacity >> 24) & 0xff;
-			ap[1] = (sdebug_capacity >> 16) & 0xff;
-			ap[2] = (sdebug_capacity >> 8) & 0xff;
-			ap[3] = sdebug_capacity & 0xff;
-		}
-		ap[6] = (scsi_debug_sector_size >> 8) & 0xff;
-		ap[7] = scsi_debug_sector_size & 0xff;
+		if (sdebug_capacity > 0xfffffffe)
+			put_unaligned_be32(0xffffffff, ap + 0);
+		else
+			put_unaligned_be32(sdebug_capacity, ap + 0);
+		put_unaligned_be16(sdebug_sector_size, ap + 6);
 		offset += bd_len;
 		ap = arr + offset;
 	} else if (16 == bd_len) {
-		unsigned long long capac = sdebug_capacity;
-
-        	for (k = 0; k < 8; ++k, capac >>= 8)
-                	ap[7 - k] = capac & 0xff;
-		ap[12] = (scsi_debug_sector_size >> 24) & 0xff;
-		ap[13] = (scsi_debug_sector_size >> 16) & 0xff;
-		ap[14] = (scsi_debug_sector_size >> 8) & 0xff;
-		ap[15] = scsi_debug_sector_size & 0xff;
+		put_unaligned_be64((u64)sdebug_capacity, ap + 0);
+		put_unaligned_be32(sdebug_sector_size, ap + 12);
 		offset += bd_len;
 		ap = arr + offset;
 	}
@@ -2149,17 +2059,15 @@ resp_mode_sense(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	}
 	if (msense_6)
 		arr[0] = offset - 1;
-	else {
-		arr[0] = ((offset - 2) >> 8) & 0xff;
-		arr[1] = (offset - 2) & 0xff;
-	}
+	else
+		put_unaligned_be16((offset - 2), arr + 0);
 	return fill_from_dev_buffer(scp, arr, min(alloc_len, offset));
 }
 
 #define SDEBUG_MAX_MSELECT_SZ 512
 
-static int
-resp_mode_select(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_mode_select(struct scsi_cmnd *scp,
+			    struct sdebug_dev_info *devip)
 {
 	int pf, sp, ps, md_len, bd_len, off, spf, pg_len;
 	int param_len, res, mpage;
@@ -2170,21 +2078,20 @@ resp_mode_select(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	memset(arr, 0, sizeof(arr));
 	pf = cmd[1] & 0x10;
 	sp = cmd[1] & 0x1;
-	param_len = mselect6 ? cmd[4] : ((cmd[7] << 8) + cmd[8]);
+	param_len = mselect6 ? cmd[4] : get_unaligned_be16(cmd + 7);
 	if ((0 == pf) || sp || (param_len > SDEBUG_MAX_MSELECT_SZ)) {
 		mk_sense_invalid_fld(scp, SDEB_IN_CDB, mselect6 ? 4 : 7, -1);
 		return check_condition_result;
 	}
         res = fetch_to_dev_buffer(scp, arr, param_len);
         if (-1 == res)
-                return (DID_ERROR << 16);
-        else if ((res < param_len) &&
-                 (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
+		return DID_ERROR << 16;
+	else if (sdebug_verbose && (res < param_len))
 		sdev_printk(KERN_INFO, scp->device,
 			    "%s: cdb indicated=%d, IO sent=%d bytes\n",
 			    __func__, param_len, res);
-	md_len = mselect6 ? (arr[0] + 1) : ((arr[0] << 8) + arr[1] + 2);
-	bd_len = mselect6 ? arr[3] : ((arr[6] << 8) + arr[7]);
+	md_len = mselect6 ? (arr[0] + 1) : (get_unaligned_be16(arr + 0) + 2);
+	bd_len = mselect6 ? arr[3] : get_unaligned_be16(arr + 6);
 	if (md_len > 2) {
 		mk_sense_invalid_fld(scp, SDEB_IN_DATA, 0, -1);
 		return check_condition_result;
@@ -2197,7 +2104,7 @@ resp_mode_select(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		return check_condition_result;
 	}
 	spf = !!(arr[off] & 0x40);
-	pg_len = spf ? ((arr[off + 2] << 8) + arr[off + 3] + 4) :
+	pg_len = spf ? (get_unaligned_be16(arr + off + 2) + 4) :
 		       (arr[off + 1] + 2);
 	if ((pg_len + off) > param_len) {
 		mk_sense_buffer(scp, ILLEGAL_REQUEST,
@@ -2216,7 +2123,7 @@ resp_mode_select(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		if (ctrl_m_pg[1] == arr[off + 1]) {
 			memcpy(ctrl_m_pg + 2, arr + off + 2,
 			       sizeof(ctrl_m_pg) - 2);
-			scsi_debug_dsense = !!(ctrl_m_pg[2] & 0x4);
+			sdebug_dsense = !!(ctrl_m_pg[2] & 0x4);
 			goto set_mode_changed_ua;
 		}
 		break;
@@ -2279,7 +2186,7 @@ static int resp_log_sense(struct scsi_cmnd * scp,
 	pcontrol = (cmd[2] & 0xc0) >> 6;
 	pcode = cmd[2] & 0x3f;
 	subpcode = cmd[3] & 0xff;
-	alloc_len = (cmd[7] << 8) + cmd[8];
+	alloc_len = get_unaligned_be16(cmd + 7);
 	arr[0] = pcode;
 	if (0 == subpcode) {
 		switch (pcode) {
@@ -2336,7 +2243,7 @@ static int resp_log_sense(struct scsi_cmnd * scp,
 		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
 		return check_condition_result;
 	}
-	len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
+	len = min(get_unaligned_be16(arr + 2) + 4, alloc_len);
 	return fill_from_dev_buffer(scp, arr,
 		    min(len, SDEBUG_MAX_INQ_ARR_SZ));
 }
@@ -2358,8 +2265,8 @@ static int check_device_access_params(struct scsi_cmnd *scp,
 }
 
 /* Returns number of bytes copied or -1 if error. */
-static int
-do_device_access(struct scsi_cmnd *scmd, u64 lba, u32 num, bool do_write)
+static int do_device_access(struct scsi_cmnd *scmd, u64 lba, u32 num,
+			    bool do_write)
 {
 	int ret;
 	u64 block, rest = 0;
@@ -2384,15 +2291,15 @@ do_device_access(struct scsi_cmnd *scmd, u64 lba, u32 num, bool do_write)
 		rest = block + num - sdebug_store_sectors;
 
 	ret = sg_copy_buffer(sdb->table.sgl, sdb->table.nents,
-		   fake_storep + (block * scsi_debug_sector_size),
-		   (num - rest) * scsi_debug_sector_size, 0, do_write);
-	if (ret != (num - rest) * scsi_debug_sector_size)
+		   fake_storep + (block * sdebug_sector_size),
+		   (num - rest) * sdebug_sector_size, 0, do_write);
+	if (ret != (num - rest) * sdebug_sector_size)
 		return ret;
 
 	if (rest) {
 		ret += sg_copy_buffer(sdb->table.sgl, sdb->table.nents,
-			    fake_storep, rest * scsi_debug_sector_size,
-			    (num - rest) * scsi_debug_sector_size, do_write);
+			    fake_storep, rest * sdebug_sector_size,
+			    (num - rest) * sdebug_sector_size, do_write);
 	}
 
 	return ret;
@@ -2401,13 +2308,12 @@ do_device_access(struct scsi_cmnd *scmd, u64 lba, u32 num, bool do_write)
 /* If fake_store(lba,num) compares equal to arr(num), then copy top half of
  * arr into fake_store(lba,num) and return true. If comparison fails then
  * return false. */
-static bool
-comp_write_worker(u64 lba, u32 num, const u8 *arr)
+static bool comp_write_worker(u64 lba, u32 num, const u8 *arr)
 {
 	bool res;
 	u64 block, rest = 0;
 	u32 store_blks = sdebug_store_sectors;
-	u32 lb_size = scsi_debug_sector_size;
+	u32 lb_size = sdebug_sector_size;
 
 	block = do_div(lba, store_blks);
 	if (block + num > store_blks)
@@ -2434,7 +2340,7 @@ static __be16 dif_compute_csum(const void *buf, int len)
 {
 	__be16 csum;
 
-	if (scsi_debug_guard)
+	if (sdebug_guard)
 		csum = (__force __be16)ip_compute_csum(buf, len);
 	else
 		csum = cpu_to_be16(crc_t10dif(buf, len));
@@ -2445,7 +2351,7 @@ static __be16 dif_compute_csum(const void *buf, int len)
 static int dif_verify(struct sd_dif_tuple *sdt, const void *data,
 		      sector_t sector, u32 ei_lba)
 {
-	__be16 csum = dif_compute_csum(data, scsi_debug_sector_size);
+	__be16 csum = dif_compute_csum(data, sdebug_sector_size);
 
 	if (sdt->guard_tag != csum) {
 		pr_err("GUARD check failed on sector %lu rcvd 0x%04x, data 0x%04x\n",
@@ -2454,13 +2360,13 @@ static int dif_verify(struct sd_dif_tuple *sdt, const void *data,
 			be16_to_cpu(csum));
 		return 0x01;
 	}
-	if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
+	if (sdebug_dif == SD_DIF_TYPE1_PROTECTION &&
 	    be32_to_cpu(sdt->ref_tag) != (sector & 0xffffffff)) {
 		pr_err("REF check failed on sector %lu\n",
 			(unsigned long)sector);
 		return 0x03;
 	}
-	if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+	if (sdebug_dif == SD_DIF_TYPE2_PROTECTION &&
 	    be32_to_cpu(sdt->ref_tag) != ei_lba) {
 		pr_err("REF check failed on sector %lu\n",
 			(unsigned long)sector);
@@ -2541,8 +2447,7 @@ static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
 	return 0;
 }
 
-static int
-resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	u64 lba;
@@ -2591,19 +2496,19 @@ resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		check_prot = false;
 		break;
 	}
-	if (check_prot) {
-		if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+	if (unlikely(have_dif_prot && check_prot)) {
+		if (sdebug_dif == SD_DIF_TYPE2_PROTECTION &&
 		    (cmd[1] & 0xe0)) {
 			mk_sense_invalid_opcode(scp);
 			return check_condition_result;
 		}
-		if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
-		     scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+		if ((sdebug_dif == SD_DIF_TYPE1_PROTECTION ||
+		     sdebug_dif == SD_DIF_TYPE3_PROTECTION) &&
 		    (cmd[1] & 0xe0) == 0)
 			sdev_printk(KERN_ERR, scp->device, "Unprotected RD "
 				    "to DIF device\n");
 	}
-	if (sdebug_any_injecting_opt) {
+	if (unlikely(sdebug_any_injecting_opt)) {
 		struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
 
 		if (ep->inj_short)
@@ -2611,20 +2516,20 @@ resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	}
 
 	/* inline check_device_access_params() */
-	if (lba + num > sdebug_capacity) {
+	if (unlikely(lba + num > sdebug_capacity)) {
 		mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
 		return check_condition_result;
 	}
 	/* transfer length excessive (tie in to block limits VPD page) */
-	if (num > sdebug_store_sectors) {
+	if (unlikely(num > sdebug_store_sectors)) {
 		/* needs work to find which cdb byte 'num' comes from */
 		mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
 		return check_condition_result;
 	}
 
-	if ((SCSI_DEBUG_OPT_MEDIUM_ERR & scsi_debug_opts) &&
-	    (lba <= (OPT_MEDIUM_ERR_ADDR + OPT_MEDIUM_ERR_NUM - 1)) &&
-	    ((lba + num) > OPT_MEDIUM_ERR_ADDR)) {
+	if (unlikely((SDEBUG_OPT_MEDIUM_ERR & sdebug_opts) &&
+		     (lba <= (OPT_MEDIUM_ERR_ADDR + OPT_MEDIUM_ERR_NUM - 1)) &&
+		     ((lba + num) > OPT_MEDIUM_ERR_ADDR))) {
 		/* claim unrecoverable read error */
 		mk_sense_buffer(scp, MEDIUM_ERROR, UNRECOVERED_READ_ERR, 0);
 		/* set info field and valid bit for fixed descriptor */
@@ -2641,7 +2546,7 @@ resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	read_lock_irqsave(&atomic_rw, iflags);
 
 	/* DIX + T10 DIF */
-	if (scsi_debug_dix && scsi_prot_sg_count(scp)) {
+	if (unlikely(sdebug_dix && scsi_prot_sg_count(scp))) {
 		int prot_ret = prot_verify_read(scp, lba, num, ei_lba);
 
 		if (prot_ret) {
@@ -2653,12 +2558,12 @@ resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 
 	ret = do_device_access(scp, lba, num, false);
 	read_unlock_irqrestore(&atomic_rw, iflags);
-	if (ret == -1)
+	if (unlikely(ret == -1))
 		return DID_ERROR << 16;
 
 	scsi_in(scp)->resid = scsi_bufflen(scp) - ret;
 
-	if (sdebug_any_injecting_opt) {
+	if (unlikely(sdebug_any_injecting_opt)) {
 		struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
 
 		if (ep->inj_recovered) {
@@ -2750,13 +2655,13 @@ static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
 
 			ret = dif_verify(sdt, daddr, sector, ei_lba);
 			if (ret) {
-				dump_sector(daddr, scsi_debug_sector_size);
+				dump_sector(daddr, sdebug_sector_size);
 				goto out;
 			}
 
 			sector++;
 			ei_lba++;
-			dpage_offset += scsi_debug_sector_size;
+			dpage_offset += sdebug_sector_size;
 		}
 		diter.consumed = dpage_offset;
 		sg_miter_stop(&diter);
@@ -2777,24 +2682,18 @@ out:
 
 static unsigned long lba_to_map_index(sector_t lba)
 {
-	if (scsi_debug_unmap_alignment) {
-		lba += scsi_debug_unmap_granularity -
-			scsi_debug_unmap_alignment;
-	}
-	sector_div(lba, scsi_debug_unmap_granularity);
-
+	if (sdebug_unmap_alignment)
+		lba += sdebug_unmap_granularity - sdebug_unmap_alignment;
+	sector_div(lba, sdebug_unmap_granularity);
 	return lba;
 }
 
 static sector_t map_index_to_lba(unsigned long index)
 {
-	sector_t lba = index * scsi_debug_unmap_granularity;
-
-	if (scsi_debug_unmap_alignment) {
-		lba -= scsi_debug_unmap_granularity -
-			scsi_debug_unmap_alignment;
-	}
+	sector_t lba = index * sdebug_unmap_granularity;
 
+	if (sdebug_unmap_alignment)
+		lba -= sdebug_unmap_granularity - sdebug_unmap_alignment;
 	return lba;
 }
 
@@ -2815,7 +2714,6 @@ static unsigned int map_state(sector_t lba, unsigned int *num)
 
 	end = min_t(sector_t, sdebug_store_sectors,  map_index_to_lba(next));
 	*num = end - lba;
-
 	return mapped;
 }
 
@@ -2841,27 +2739,26 @@ static void unmap_region(sector_t lba, unsigned int len)
 		unsigned long index = lba_to_map_index(lba);
 
 		if (lba == map_index_to_lba(index) &&
-		    lba + scsi_debug_unmap_granularity <= end &&
+		    lba + sdebug_unmap_granularity <= end &&
 		    index < map_size) {
 			clear_bit(index, map_storep);
-			if (scsi_debug_lbprz) {
+			if (sdebug_lbprz) {
 				memset(fake_storep +
-				       lba * scsi_debug_sector_size, 0,
-				       scsi_debug_sector_size *
-				       scsi_debug_unmap_granularity);
+				       lba * sdebug_sector_size, 0,
+				       sdebug_sector_size *
+				       sdebug_unmap_granularity);
 			}
 			if (dif_storep) {
 				memset(dif_storep + lba, 0xff,
 				       sizeof(*dif_storep) *
-				       scsi_debug_unmap_granularity);
+				       sdebug_unmap_granularity);
 			}
 		}
 		lba = map_index_to_lba(index + 1);
 	}
 }
 
-static int
-resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	u64 lba;
@@ -2910,26 +2807,26 @@ resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		check_prot = false;
 		break;
 	}
-	if (check_prot) {
-		if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+	if (unlikely(have_dif_prot && check_prot)) {
+		if (sdebug_dif == SD_DIF_TYPE2_PROTECTION &&
 		    (cmd[1] & 0xe0)) {
 			mk_sense_invalid_opcode(scp);
 			return check_condition_result;
 		}
-		if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
-		     scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+		if ((sdebug_dif == SD_DIF_TYPE1_PROTECTION ||
+		     sdebug_dif == SD_DIF_TYPE3_PROTECTION) &&
 		    (cmd[1] & 0xe0) == 0)
 			sdev_printk(KERN_ERR, scp->device, "Unprotected WR "
 				    "to DIF device\n");
 	}
 
 	/* inline check_device_access_params() */
-	if (lba + num > sdebug_capacity) {
+	if (unlikely(lba + num > sdebug_capacity)) {
 		mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
 		return check_condition_result;
 	}
 	/* transfer length excessive (tie in to block limits VPD page) */
-	if (num > sdebug_store_sectors) {
+	if (unlikely(num > sdebug_store_sectors)) {
 		/* needs work to find which cdb byte 'num' comes from */
 		mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
 		return check_condition_result;
@@ -2938,7 +2835,7 @@ resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	write_lock_irqsave(&atomic_rw, iflags);
 
 	/* DIX + T10 DIF */
-	if (scsi_debug_dix && scsi_prot_sg_count(scp)) {
+	if (unlikely(sdebug_dix && scsi_prot_sg_count(scp))) {
 		int prot_ret = prot_verify_write(scp, lba, num, ei_lba);
 
 		if (prot_ret) {
@@ -2949,18 +2846,17 @@ resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	}
 
 	ret = do_device_access(scp, lba, num, true);
-	if (scsi_debug_lbp())
+	if (unlikely(scsi_debug_lbp()))
 		map_region(lba, num);
 	write_unlock_irqrestore(&atomic_rw, iflags);
-	if (-1 == ret)
-		return (DID_ERROR << 16);
-	else if ((ret < (num * scsi_debug_sector_size)) &&
-		 (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
+	if (unlikely(-1 == ret))
+		return DID_ERROR << 16;
+	else if (sdebug_verbose && (ret < (num * sdebug_sector_size)))
 		sdev_printk(KERN_INFO, scp->device,
 			    "%s: write: cdb indicated=%u, IO sent=%d bytes\n",
-			    my_name, num * scsi_debug_sector_size, ret);
+			    my_name, num * sdebug_sector_size, ret);
 
-	if (sdebug_any_injecting_opt) {
+	if (unlikely(sdebug_any_injecting_opt)) {
 		struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
 
 		if (ep->inj_recovered) {
@@ -2979,13 +2875,13 @@ resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	return 0;
 }
 
-static int
-resp_write_same(struct scsi_cmnd *scp, u64 lba, u32 num, u32 ei_lba,
-		bool unmap, bool ndob)
+static int resp_write_same(struct scsi_cmnd *scp, u64 lba, u32 num,
+			   u32 ei_lba, bool unmap, bool ndob)
 {
 	unsigned long iflags;
 	unsigned long long i;
 	int ret;
+	u64 lba_off;
 
 	ret = check_device_access_params(scp, lba, num);
 	if (ret)
@@ -2998,31 +2894,29 @@ resp_write_same(struct scsi_cmnd *scp, u64 lba, u32 num, u32 ei_lba,
 		goto out;
 	}
 
+	lba_off = lba * sdebug_sector_size;
 	/* if ndob then zero 1 logical block, else fetch 1 logical block */
 	if (ndob) {
-		memset(fake_storep + (lba * scsi_debug_sector_size), 0,
-		       scsi_debug_sector_size);
+		memset(fake_storep + lba_off, 0, sdebug_sector_size);
 		ret = 0;
 	} else
-		ret = fetch_to_dev_buffer(scp, fake_storep +
-					       (lba * scsi_debug_sector_size),
-					  scsi_debug_sector_size);
+		ret = fetch_to_dev_buffer(scp, fake_storep + lba_off,
+					  sdebug_sector_size);
 
 	if (-1 == ret) {
 		write_unlock_irqrestore(&atomic_rw, iflags);
-		return (DID_ERROR << 16);
-	} else if ((ret < (num * scsi_debug_sector_size)) &&
-		 (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
+		return DID_ERROR << 16;
+	} else if (sdebug_verbose && (ret < (num * sdebug_sector_size)))
 		sdev_printk(KERN_INFO, scp->device,
 			    "%s: %s: cdb indicated=%u, IO sent=%d bytes\n",
 			    my_name, "write same",
-			    num * scsi_debug_sector_size, ret);
+			    num * sdebug_sector_size, ret);
 
 	/* Copy first sector to remaining blocks */
 	for (i = 1 ; i < num ; i++)
-		memcpy(fake_storep + ((lba + i) * scsi_debug_sector_size),
-		       fake_storep + (lba * scsi_debug_sector_size),
-		       scsi_debug_sector_size);
+		memcpy(fake_storep + ((lba + i) * sdebug_sector_size),
+		       fake_storep + lba_off,
+		       sdebug_sector_size);
 
 	if (scsi_debug_lbp())
 		map_region(lba, num);
@@ -3032,8 +2926,8 @@ out:
 	return 0;
 }
 
-static int
-resp_write_same_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_write_same_10(struct scsi_cmnd *scp,
+			      struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	u32 lba;
@@ -3042,7 +2936,7 @@ resp_write_same_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	bool unmap = false;
 
 	if (cmd[1] & 0x8) {
-		if (scsi_debug_lbpws10 == 0) {
+		if (sdebug_lbpws10 == 0) {
 			mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 3);
 			return check_condition_result;
 		} else
@@ -3050,15 +2944,15 @@ resp_write_same_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	}
 	lba = get_unaligned_be32(cmd + 2);
 	num = get_unaligned_be16(cmd + 7);
-	if (num > scsi_debug_write_same_length) {
+	if (num > sdebug_write_same_length) {
 		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 7, -1);
 		return check_condition_result;
 	}
 	return resp_write_same(scp, lba, num, ei_lba, unmap, false);
 }
 
-static int
-resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_write_same_16(struct scsi_cmnd *scp,
+			      struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	u64 lba;
@@ -3068,7 +2962,7 @@ resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	bool ndob = false;
 
 	if (cmd[1] & 0x8) {	/* UNMAP */
-		if (scsi_debug_lbpws == 0) {
+		if (sdebug_lbpws == 0) {
 			mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 3);
 			return check_condition_result;
 		} else
@@ -3078,7 +2972,7 @@ resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		ndob = true;
 	lba = get_unaligned_be64(cmd + 2);
 	num = get_unaligned_be32(cmd + 10);
-	if (num > scsi_debug_write_same_length) {
+	if (num > sdebug_write_same_length) {
 		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 10, -1);
 		return check_condition_result;
 	}
@@ -3088,8 +2982,8 @@ resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 /* Note the mode field is in the same position as the (lower) service action
  * field. For the Report supported operation codes command, SPC-4 suggests
  * each mode of this command should be reported separately; for future. */
-static int
-resp_write_buffer(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_write_buffer(struct scsi_cmnd *scp,
+			     struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	struct scsi_device *sdp = scp->device;
@@ -3134,15 +3028,15 @@ resp_write_buffer(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	return 0;
 }
 
-static int
-resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_comp_write(struct scsi_cmnd *scp,
+			   struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	u8 *arr;
 	u8 *fake_storep_hold;
 	u64 lba;
 	u32 dnum;
-	u32 lb_size = scsi_debug_sector_size;
+	u32 lb_size = sdebug_sector_size;
 	u8 num;
 	unsigned long iflags;
 	int ret;
@@ -3152,13 +3046,13 @@ resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	num = cmd[13];		/* 1 to a maximum of 255 logical blocks */
 	if (0 == num)
 		return 0;	/* degenerate case, not an error */
-	if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+	if (sdebug_dif == SD_DIF_TYPE2_PROTECTION &&
 	    (cmd[1] & 0xe0)) {
 		mk_sense_invalid_opcode(scp);
 		return check_condition_result;
 	}
-	if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
-	     scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+	if ((sdebug_dif == SD_DIF_TYPE1_PROTECTION ||
+	     sdebug_dif == SD_DIF_TYPE3_PROTECTION) &&
 	    (cmd[1] & 0xe0) == 0)
 		sdev_printk(KERN_ERR, scp->device, "Unprotected WR "
 			    "to DIF device\n");
@@ -3193,8 +3087,7 @@ resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	if (ret == -1) {
 		retval = DID_ERROR << 16;
 		goto cleanup;
-	} else if ((ret < (dnum * lb_size)) &&
-		 (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
+	} else if (sdebug_verbose && (ret < (dnum * lb_size)))
 		sdev_printk(KERN_INFO, scp->device, "%s: compare_write: cdb "
 			    "indicated=%u, IO sent=%d bytes\n", my_name,
 			    dnum * lb_size, ret);
@@ -3217,8 +3110,7 @@ struct unmap_block_desc {
 	__be32	__reserved;
 };
 
-static int
-resp_unmap(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_unmap(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 {
 	unsigned char *buf;
 	struct unmap_block_desc *desc;
@@ -3233,12 +3125,12 @@ resp_unmap(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	BUG_ON(scsi_bufflen(scp) != payload_len);
 
 	descriptors = (payload_len - 8) / 16;
-	if (descriptors > scsi_debug_unmap_max_desc) {
+	if (descriptors > sdebug_unmap_max_desc) {
 		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 7, -1);
 		return check_condition_result;
 	}
 
-	buf = kmalloc(scsi_bufflen(scp), GFP_ATOMIC);
+	buf = kzalloc(scsi_bufflen(scp), GFP_ATOMIC);
 	if (!buf) {
 		mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
 				INSUFF_RES_ASCQ);
@@ -3276,8 +3168,8 @@ out:
 
 #define SDEBUG_GET_LBA_STATUS_LEN 32
 
-static int
-resp_get_lba_status(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_get_lba_status(struct scsi_cmnd *scp,
+			       struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	u64 lba;
@@ -3316,63 +3208,94 @@ resp_get_lba_status(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	return fill_from_dev_buffer(scp, arr, SDEBUG_GET_LBA_STATUS_LEN);
 }
 
-#define SDEBUG_RLUN_ARR_SZ 256
-
-static int resp_report_luns(struct scsi_cmnd * scp,
-			    struct sdebug_dev_info * devip)
+/* Even though each pseudo target has a REPORT LUNS "well known logical unit"
+ * (W-LUN), the normal Linux scanning logic does not associate it with a
+ * device (e.g. /dev/sg7). The following magic will make that association:
+ *   "cd /sys/class/scsi_host/host<n> ; echo '- - 49409' > scan"
+ * where <n> is a host number. If there are multiple targets in a host then
+ * the above will associate a W-LUN to each target. To only get a W-LUN
+ * for target 2, then use "echo '- 2 49409' > scan" .
+ */
+static int resp_report_luns(struct scsi_cmnd *scp,
+			    struct sdebug_dev_info *devip)
 {
+	unsigned char *cmd = scp->cmnd;
 	unsigned int alloc_len;
-	int lun_cnt, i, upper, num, n, want_wlun, shortish;
+	unsigned char select_report;
 	u64 lun;
-	unsigned char *cmd = scp->cmnd;
-	int select_report = (int)cmd[2];
-	struct scsi_lun *one_lun;
-	unsigned char arr[SDEBUG_RLUN_ARR_SZ];
-	unsigned char * max_addr;
+	struct scsi_lun *lun_p;
+	u8 *arr;
+	unsigned int lun_cnt;	/* normal LUN count (max: 256) */
+	unsigned int wlun_cnt;	/* report luns W-LUN count */
+	unsigned int tlun_cnt;	/* total LUN count */
+	unsigned int rlen;	/* response length (in bytes) */
+	int i, res;
 
 	clear_luns_changed_on_target(devip);
-	alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
-	shortish = (alloc_len < 4);
-	if (shortish || (select_report > 2)) {
-		mk_sense_invalid_fld(scp, SDEB_IN_CDB, shortish ? 6 : 2, -1);
+
+	select_report = cmd[2];
+	alloc_len = get_unaligned_be32(cmd + 6);
+
+	if (alloc_len < 4) {
+		pr_err("alloc len too small %d\n", alloc_len);
+		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 6, -1);
 		return check_condition_result;
 	}
-	/* can produce response with up to 16k luns (lun 0 to lun 16383) */
-	memset(arr, 0, SDEBUG_RLUN_ARR_SZ);
-	lun_cnt = scsi_debug_max_luns;
-	if (1 == select_report)
+
+	switch (select_report) {
+	case 0:		/* all LUNs apart from W-LUNs */
+		lun_cnt = sdebug_max_luns;
+		wlun_cnt = 0;
+		break;
+	case 1:		/* only W-LUNs */
 		lun_cnt = 0;
-	else if (scsi_debug_no_lun_0 && (lun_cnt > 0))
+		wlun_cnt = 1;
+		break;
+	case 2:		/* all LUNs */
+		lun_cnt = sdebug_max_luns;
+		wlun_cnt = 1;
+		break;
+	case 0x10:	/* only administrative LUs */
+	case 0x11:	/* see SPC-5 */
+	case 0x12:	/* only subsiduary LUs owned by referenced LU */
+	default:
+		pr_debug("select report invalid %d\n", select_report);
+		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, -1);
+		return check_condition_result;
+	}
+
+	if (sdebug_no_lun_0 && (lun_cnt > 0))
 		--lun_cnt;
-	want_wlun = (select_report > 0) ? 1 : 0;
-	num = lun_cnt + want_wlun;
-	arr[2] = ((sizeof(struct scsi_lun) * num) >> 8) & 0xff;
-	arr[3] = (sizeof(struct scsi_lun) * num) & 0xff;
-	n = min((int)((SDEBUG_RLUN_ARR_SZ - 8) /
-			    sizeof(struct scsi_lun)), num);
-	if (n < num) {
-		want_wlun = 0;
-		lun_cnt = n;
-	}
-	one_lun = (struct scsi_lun *) &arr[8];
-	max_addr = arr + SDEBUG_RLUN_ARR_SZ;
-	for (i = 0, lun = (scsi_debug_no_lun_0 ? 1 : 0);
-             ((i < lun_cnt) && ((unsigned char *)(one_lun + i) < max_addr));
-	     i++, lun++) {
-		upper = (lun >> 8) & 0x3f;
-		if (upper)
-			one_lun[i].scsi_lun[0] =
-			    (upper | (SAM2_LUN_ADDRESS_METHOD << 6));
-		one_lun[i].scsi_lun[1] = lun & 0xff;
-	}
-	if (want_wlun) {
-		one_lun[i].scsi_lun[0] = (SCSI_W_LUN_REPORT_LUNS >> 8) & 0xff;
-		one_lun[i].scsi_lun[1] = SCSI_W_LUN_REPORT_LUNS & 0xff;
-		i++;
-	}
-	alloc_len = (unsigned char *)(one_lun + i) - arr;
-	return fill_from_dev_buffer(scp, arr,
-				    min((int)alloc_len, SDEBUG_RLUN_ARR_SZ));
+
+	tlun_cnt = lun_cnt + wlun_cnt;
+
+	rlen = (tlun_cnt * sizeof(struct scsi_lun)) + 8;
+	arr = vmalloc(rlen);
+	if (!arr) {
+		mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
+				INSUFF_RES_ASCQ);
+		return check_condition_result;
+	}
+	memset(arr, 0, rlen);
+	pr_debug("select_report %d luns = %d wluns = %d no_lun0 %d\n",
+		 select_report, lun_cnt, wlun_cnt, sdebug_no_lun_0);
+
+	/* luns start at byte 8 in response following the header */
+	lun_p = (struct scsi_lun *)&arr[8];
+
+	/* LUNs use single level peripheral device addressing method */
+	lun = sdebug_no_lun_0 ? 1 : 0;
+	for (i = 0; i < lun_cnt; i++)
+		int_to_scsilun(lun++, lun_p++);
+
+	if (wlun_cnt)
+		int_to_scsilun(SCSI_W_LUN_REPORT_LUNS, lun_p++);
+
+	put_unaligned_be32(rlen - 8, &arr[0]);
+
+	res = fill_from_dev_buffer(scp, arr, rlen);
+	vfree(arr);
+	return res;
 }
 
 static int resp_xdwriteread(struct scsi_cmnd *scp, unsigned long long lba,
@@ -3385,7 +3308,7 @@ static int resp_xdwriteread(struct scsi_cmnd *scp, unsigned long long lba,
 	struct sg_mapping_iter miter;
 
 	/* better not to use temporary buffer. */
-	buf = kmalloc(scsi_bufflen(scp), GFP_ATOMIC);
+	buf = kzalloc(scsi_bufflen(scp), GFP_ATOMIC);
 	if (!buf) {
 		mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
 				INSUFF_RES_ASCQ);
@@ -3411,8 +3334,8 @@ static int resp_xdwriteread(struct scsi_cmnd *scp, unsigned long long lba,
 	return 0;
 }
 
-static int
-resp_xdwriteread_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+static int resp_xdwriteread_10(struct scsi_cmnd *scp,
+			       struct sdebug_dev_info *devip)
 {
 	u8 *cmd = scp->cmnd;
 	u64 lba;
@@ -3437,8 +3360,8 @@ resp_xdwriteread_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	return resp_xdwriteread(scp, lba, num, devip);
 }
 
-/* When timer or tasklet goes off this function is called. */
-static void sdebug_q_cmd_complete(unsigned long indx)
+/* Queued command completions converge here. */
+static void sdebug_q_cmd_complete(struct sdebug_defer *sd_dp)
 {
 	int qa_indx;
 	int retiring = 0;
@@ -3448,29 +3371,29 @@ static void sdebug_q_cmd_complete(unsigned long indx)
 	struct sdebug_dev_info *devip;
 
 	atomic_inc(&sdebug_completions);
-	qa_indx = indx;
-	if ((qa_indx < 0) || (qa_indx >= SCSI_DEBUG_CANQUEUE)) {
+	qa_indx = sd_dp->qa_indx;
+	if (unlikely((qa_indx < 0) || (qa_indx >= SCSI_DEBUG_CANQUEUE))) {
 		pr_err("wild qa_indx=%d\n", qa_indx);
 		return;
 	}
 	spin_lock_irqsave(&queued_arr_lock, iflags);
 	sqcp = &queued_arr[qa_indx];
 	scp = sqcp->a_cmnd;
-	if (NULL == scp) {
+	if (unlikely(scp == NULL)) {
 		spin_unlock_irqrestore(&queued_arr_lock, iflags);
 		pr_err("scp is NULL\n");
 		return;
 	}
 	devip = (struct sdebug_dev_info *)scp->device->hostdata;
-	if (devip)
+	if (likely(devip))
 		atomic_dec(&devip->num_in_q);
 	else
 		pr_err("devip=NULL\n");
-	if (atomic_read(&retired_max_queue) > 0)
+	if (unlikely(atomic_read(&retired_max_queue) > 0))
 		retiring = 1;
 
 	sqcp->a_cmnd = NULL;
-	if (!test_and_clear_bit(qa_indx, queued_in_use_bm)) {
+	if (unlikely(!test_and_clear_bit(qa_indx, queued_in_use_bm))) {
 		spin_unlock_irqrestore(&queued_arr_lock, iflags);
 		pr_err("Unexpected completion\n");
 		return;
@@ -3486,7 +3409,7 @@ static void sdebug_q_cmd_complete(unsigned long indx)
 			return;
 		}
 		k = find_last_bit(queued_in_use_bm, retval);
-		if ((k < scsi_debug_max_queue) || (k == retval))
+		if ((k < sdebug_max_queue) || (k == retval))
 			atomic_set(&retired_max_queue, 0);
 		else
 			atomic_set(&retired_max_queue, k + 1);
@@ -3496,69 +3419,24 @@ static void sdebug_q_cmd_complete(unsigned long indx)
 }
 
 /* When high resolution timer goes off this function is called. */
-static enum hrtimer_restart
-sdebug_q_cmd_hrt_complete(struct hrtimer *timer)
+static enum hrtimer_restart sdebug_q_cmd_hrt_complete(struct hrtimer *timer)
 {
-	int qa_indx;
-	int retiring = 0;
-	unsigned long iflags;
-	struct sdebug_hrtimer *sd_hrtp = (struct sdebug_hrtimer *)timer;
-	struct sdebug_queued_cmd *sqcp;
-	struct scsi_cmnd *scp;
-	struct sdebug_dev_info *devip;
-
-	atomic_inc(&sdebug_completions);
-	qa_indx = sd_hrtp->qa_indx;
-	if ((qa_indx < 0) || (qa_indx >= SCSI_DEBUG_CANQUEUE)) {
-		pr_err("wild qa_indx=%d\n", qa_indx);
-		goto the_end;
-	}
-	spin_lock_irqsave(&queued_arr_lock, iflags);
-	sqcp = &queued_arr[qa_indx];
-	scp = sqcp->a_cmnd;
-	if (NULL == scp) {
-		spin_unlock_irqrestore(&queued_arr_lock, iflags);
-		pr_err("scp is NULL\n");
-		goto the_end;
-	}
-	devip = (struct sdebug_dev_info *)scp->device->hostdata;
-	if (devip)
-		atomic_dec(&devip->num_in_q);
-	else
-		pr_err("devip=NULL\n");
-	if (atomic_read(&retired_max_queue) > 0)
-		retiring = 1;
-
-	sqcp->a_cmnd = NULL;
-	if (!test_and_clear_bit(qa_indx, queued_in_use_bm)) {
-		spin_unlock_irqrestore(&queued_arr_lock, iflags);
-		pr_err("Unexpected completion\n");
-		goto the_end;
-	}
-
-	if (unlikely(retiring)) {	/* user has reduced max_queue */
-		int k, retval;
-
-		retval = atomic_read(&retired_max_queue);
-		if (qa_indx >= retval) {
-			spin_unlock_irqrestore(&queued_arr_lock, iflags);
-			pr_err("index %d too large\n", retval);
-			goto the_end;
-		}
-		k = find_last_bit(queued_in_use_bm, retval);
-		if ((k < scsi_debug_max_queue) || (k == retval))
-			atomic_set(&retired_max_queue, 0);
-		else
-			atomic_set(&retired_max_queue, k + 1);
-	}
-	spin_unlock_irqrestore(&queued_arr_lock, iflags);
-	scp->scsi_done(scp); /* callback to mid level */
-the_end:
+	struct sdebug_defer *sd_dp = container_of(timer, struct sdebug_defer,
+						  hrt);
+	sdebug_q_cmd_complete(sd_dp);
 	return HRTIMER_NORESTART;
 }
 
-static struct sdebug_dev_info *
-sdebug_device_create(struct sdebug_host_info *sdbg_host, gfp_t flags)
+/* When work queue schedules work, it calls this function. */
+static void sdebug_q_cmd_wq_complete(struct work_struct *work)
+{
+	struct sdebug_defer *sd_dp = container_of(work, struct sdebug_defer,
+						  ew.work);
+	sdebug_q_cmd_complete(sd_dp);
+}
+
+static struct sdebug_dev_info *sdebug_device_create(
+			struct sdebug_host_info *sdbg_host, gfp_t flags)
 {
 	struct sdebug_dev_info *devip;
 
@@ -3570,15 +3448,12 @@ sdebug_device_create(struct sdebug_host_info *sdbg_host, gfp_t flags)
 	return devip;
 }
 
-static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
+static struct sdebug_dev_info *find_build_dev_info(struct scsi_device *sdev)
 {
-	struct sdebug_host_info * sdbg_host;
-	struct sdebug_dev_info * open_devip = NULL;
-	struct sdebug_dev_info * devip =
-			(struct sdebug_dev_info *)sdev->hostdata;
+	struct sdebug_host_info *sdbg_host;
+	struct sdebug_dev_info *open_devip = NULL;
+	struct sdebug_dev_info *devip;
 
-	if (devip)
-		return devip;
 	sdbg_host = *(struct sdebug_host_info **)shost_priv(sdev->host);
 	if (!sdbg_host) {
 		pr_err("Host info NULL\n");
@@ -3614,7 +3489,7 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
 
 static int scsi_debug_slave_alloc(struct scsi_device *sdp)
 {
-	if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+	if (sdebug_verbose)
 		pr_info("slave_alloc <%u %u %u %llu>\n",
 		       sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
 	queue_flag_set_unlocked(QUEUE_FLAG_BIDI, sdp->request_queue);
@@ -3623,19 +3498,22 @@ static int scsi_debug_slave_alloc(struct scsi_device *sdp)
 
 static int scsi_debug_slave_configure(struct scsi_device *sdp)
 {
-	struct sdebug_dev_info *devip;
+	struct sdebug_dev_info *devip =
+			(struct sdebug_dev_info *)sdp->hostdata;
 
-	if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+	if (sdebug_verbose)
 		pr_info("slave_configure <%u %u %u %llu>\n",
 		       sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
-	if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
-		sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
-	devip = devInfoReg(sdp);
-	if (NULL == devip)
-		return 1;	/* no resources, will be marked offline */
+	if (sdp->host->max_cmd_len != SDEBUG_MAX_CMD_LEN)
+		sdp->host->max_cmd_len = SDEBUG_MAX_CMD_LEN;
+	if (devip == NULL) {
+		devip = find_build_dev_info(sdp);
+		if (devip == NULL)
+			return 1;  /* no resources, will be marked offline */
+	}
 	sdp->hostdata = devip;
 	blk_queue_max_segment_size(sdp->request_queue, -1U);
-	if (scsi_debug_no_uld)
+	if (sdebug_no_uld)
 		sdp->no_uld_attach = 1;
 	return 0;
 }
@@ -3645,7 +3523,7 @@ static void scsi_debug_slave_destroy(struct scsi_device *sdp)
 	struct sdebug_dev_info *devip =
 		(struct sdebug_dev_info *)sdp->hostdata;
 
-	if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+	if (sdebug_verbose)
 		pr_info("slave_destroy <%u %u %u %llu>\n",
 		       sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
 	if (devip) {
@@ -3655,86 +3533,81 @@ static void scsi_debug_slave_destroy(struct scsi_device *sdp)
 	}
 }
 
-/* Returns 1 if cmnd found (deletes its timer or tasklet), else returns 0 */
-static int stop_queued_cmnd(struct scsi_cmnd *cmnd)
+/* If @cmnd found deletes its timer or work queue and returns true; else
+   returns false */
+static bool stop_queued_cmnd(struct scsi_cmnd *cmnd)
 {
 	unsigned long iflags;
 	int k, qmax, r_qmax;
 	struct sdebug_queued_cmd *sqcp;
 	struct sdebug_dev_info *devip;
+	struct sdebug_defer *sd_dp;
 
 	spin_lock_irqsave(&queued_arr_lock, iflags);
-	qmax = scsi_debug_max_queue;
+	qmax = sdebug_max_queue;
 	r_qmax = atomic_read(&retired_max_queue);
 	if (r_qmax > qmax)
 		qmax = r_qmax;
 	for (k = 0; k < qmax; ++k) {
 		if (test_bit(k, queued_in_use_bm)) {
 			sqcp = &queued_arr[k];
-			if (cmnd == sqcp->a_cmnd) {
-				devip = (struct sdebug_dev_info *)
-					cmnd->device->hostdata;
-				if (devip)
-					atomic_dec(&devip->num_in_q);
-				sqcp->a_cmnd = NULL;
-				spin_unlock_irqrestore(&queued_arr_lock,
-						       iflags);
-				if (scsi_debug_ndelay > 0) {
-					if (sqcp->sd_hrtp)
-						hrtimer_cancel(
-							&sqcp->sd_hrtp->hrt);
-				} else if (scsi_debug_delay > 0) {
-					if (sqcp->cmnd_timerp)
-						del_timer_sync(
-							sqcp->cmnd_timerp);
-				} else if (scsi_debug_delay < 0) {
-					if (sqcp->tletp)
-						tasklet_kill(sqcp->tletp);
-				}
-				clear_bit(k, queued_in_use_bm);
-				return 1;
+			if (cmnd != sqcp->a_cmnd)
+				continue;
+			/* found command */
+			devip = (struct sdebug_dev_info *)
+				cmnd->device->hostdata;
+			if (devip)
+				atomic_dec(&devip->num_in_q);
+			sqcp->a_cmnd = NULL;
+			sd_dp = sqcp->sd_dp;
+			spin_unlock_irqrestore(&queued_arr_lock,
+					       iflags);
+			if (sdebug_jdelay > 0 || sdebug_ndelay > 0) {
+				if (sd_dp)
+					hrtimer_cancel(&sd_dp->hrt);
+			} else if (sdebug_jdelay < 0) {
+				if (sd_dp)
+					cancel_work_sync(&sd_dp->ew.work);
 			}
+			clear_bit(k, queued_in_use_bm);
+			return true;
 		}
 	}
 	spin_unlock_irqrestore(&queued_arr_lock, iflags);
-	return 0;
+	return false;
 }
 
-/* Deletes (stops) timers or tasklets of all queued commands */
+/* Deletes (stops) timers or work queues of all queued commands */
 static void stop_all_queued(void)
 {
 	unsigned long iflags;
 	int k;
 	struct sdebug_queued_cmd *sqcp;
 	struct sdebug_dev_info *devip;
+	struct sdebug_defer *sd_dp;
 
 	spin_lock_irqsave(&queued_arr_lock, iflags);
 	for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) {
 		if (test_bit(k, queued_in_use_bm)) {
 			sqcp = &queued_arr[k];
-			if (sqcp->a_cmnd) {
-				devip = (struct sdebug_dev_info *)
-					sqcp->a_cmnd->device->hostdata;
-				if (devip)
-					atomic_dec(&devip->num_in_q);
-				sqcp->a_cmnd = NULL;
-				spin_unlock_irqrestore(&queued_arr_lock,
-						       iflags);
-				if (scsi_debug_ndelay > 0) {
-					if (sqcp->sd_hrtp)
-						hrtimer_cancel(
-							&sqcp->sd_hrtp->hrt);
-				} else if (scsi_debug_delay > 0) {
-					if (sqcp->cmnd_timerp)
-						del_timer_sync(
-							sqcp->cmnd_timerp);
-				} else if (scsi_debug_delay < 0) {
-					if (sqcp->tletp)
-						tasklet_kill(sqcp->tletp);
-				}
-				clear_bit(k, queued_in_use_bm);
-				spin_lock_irqsave(&queued_arr_lock, iflags);
+			if (NULL == sqcp->a_cmnd)
+				continue;
+			devip = (struct sdebug_dev_info *)
+				sqcp->a_cmnd->device->hostdata;
+			if (devip)
+				atomic_dec(&devip->num_in_q);
+			sqcp->a_cmnd = NULL;
+			sd_dp = sqcp->sd_dp;
+			spin_unlock_irqrestore(&queued_arr_lock, iflags);
+			if (sdebug_jdelay > 0 || sdebug_ndelay > 0) {
+				if (sd_dp)
+					hrtimer_cancel(&sd_dp->hrt);
+			} else if (sdebug_jdelay < 0) {
+				if (sd_dp)
+					cancel_work_sync(&sd_dp->ew.work);
 			}
+			clear_bit(k, queued_in_use_bm);
+			spin_lock_irqsave(&queued_arr_lock, iflags);
 		}
 	}
 	spin_unlock_irqrestore(&queued_arr_lock, iflags);
@@ -3743,47 +3616,41 @@ static void stop_all_queued(void)
 /* Free queued command memory on heap */
 static void free_all_queued(void)
 {
-	unsigned long iflags;
 	int k;
 	struct sdebug_queued_cmd *sqcp;
 
-	spin_lock_irqsave(&queued_arr_lock, iflags);
 	for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) {
 		sqcp = &queued_arr[k];
-		kfree(sqcp->cmnd_timerp);
-		sqcp->cmnd_timerp = NULL;
-		kfree(sqcp->tletp);
-		sqcp->tletp = NULL;
-		kfree(sqcp->sd_hrtp);
-		sqcp->sd_hrtp = NULL;
+		kfree(sqcp->sd_dp);
+		sqcp->sd_dp = NULL;
 	}
-	spin_unlock_irqrestore(&queued_arr_lock, iflags);
 }
 
 static int scsi_debug_abort(struct scsi_cmnd *SCpnt)
 {
+	bool ok;
+
 	++num_aborts;
 	if (SCpnt) {
-		if (SCpnt->device &&
-		    (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts))
-			sdev_printk(KERN_INFO, SCpnt->device, "%s\n",
-				    __func__);
-		stop_queued_cmnd(SCpnt);
+		ok = stop_queued_cmnd(SCpnt);
+		if (SCpnt->device && (SDEBUG_OPT_ALL_NOISE & sdebug_opts))
+			sdev_printk(KERN_INFO, SCpnt->device,
+				    "%s: command%s found\n", __func__,
+				    ok ? "" : " not");
 	}
 	return SUCCESS;
 }
 
 static int scsi_debug_device_reset(struct scsi_cmnd * SCpnt)
 {
-	struct sdebug_dev_info * devip;
-
 	++num_dev_resets;
 	if (SCpnt && SCpnt->device) {
 		struct scsi_device *sdp = SCpnt->device;
+		struct sdebug_dev_info *devip =
+				(struct sdebug_dev_info *)sdp->hostdata;
 
-		if (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts)
+		if (SDEBUG_OPT_ALL_NOISE & sdebug_opts)
 			sdev_printk(KERN_INFO, sdp, "%s\n", __func__);
-		devip = devInfoReg(sdp);
 		if (devip)
 			set_bit(SDEBUG_UA_POR, devip->uas_bm);
 	}
@@ -3804,7 +3671,7 @@ static int scsi_debug_target_reset(struct scsi_cmnd *SCpnt)
 	sdp = SCpnt->device;
 	if (!sdp)
 		goto lie;
-	if (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts)
+	if (SDEBUG_OPT_ALL_NOISE & sdebug_opts)
 		sdev_printk(KERN_INFO, sdp, "%s\n", __func__);
 	hp = sdp->host;
 	if (!hp)
@@ -3819,7 +3686,7 @@ static int scsi_debug_target_reset(struct scsi_cmnd *SCpnt)
 				++k;
 			}
 	}
-	if (SCSI_DEBUG_OPT_RESET_NOISE & scsi_debug_opts)
+	if (SDEBUG_OPT_RESET_NOISE & sdebug_opts)
 		sdev_printk(KERN_INFO, sdp,
 			    "%s: %d device(s) found in target\n", __func__, k);
 lie:
@@ -3838,7 +3705,7 @@ static int scsi_debug_bus_reset(struct scsi_cmnd * SCpnt)
 	if (!(SCpnt && SCpnt->device))
 		goto lie;
 	sdp = SCpnt->device;
-	if (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts)
+	if (SDEBUG_OPT_ALL_NOISE & sdebug_opts)
 		sdev_printk(KERN_INFO, sdp, "%s\n", __func__);
 	hp = sdp->host;
 	if (hp) {
@@ -3852,7 +3719,7 @@ static int scsi_debug_bus_reset(struct scsi_cmnd * SCpnt)
 			}
 		}
 	}
-	if (SCSI_DEBUG_OPT_RESET_NOISE & scsi_debug_opts)
+	if (SDEBUG_OPT_RESET_NOISE & sdebug_opts)
 		sdev_printk(KERN_INFO, sdp,
 			    "%s: %d device(s) found in host\n", __func__, k);
 lie:
@@ -3866,7 +3733,7 @@ static int scsi_debug_host_reset(struct scsi_cmnd * SCpnt)
 	int k = 0;
 
 	++num_host_resets;
-	if ((SCpnt->device) && (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts))
+	if ((SCpnt->device) && (SDEBUG_OPT_ALL_NOISE & sdebug_opts))
 		sdev_printk(KERN_INFO, SCpnt->device, "%s\n", __func__);
         spin_lock(&sdebug_host_list_lock);
         list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
@@ -3878,7 +3745,7 @@ static int scsi_debug_host_reset(struct scsi_cmnd * SCpnt)
         }
         spin_unlock(&sdebug_host_list_lock);
 	stop_all_queued();
-	if (SCSI_DEBUG_OPT_RESET_NOISE & scsi_debug_opts)
+	if (SDEBUG_OPT_RESET_NOISE & sdebug_opts)
 		sdev_printk(KERN_INFO, SCpnt->device,
 			    "%s: %d device(s) found\n", __func__, k);
 	return SUCCESS;
@@ -3893,22 +3760,22 @@ static void __init sdebug_build_parts(unsigned char *ramp,
 	int heads_by_sects, start_sec, end_sec;
 
 	/* assume partition table already zeroed */
-	if ((scsi_debug_num_parts < 1) || (store_size < 1048576))
+	if ((sdebug_num_parts < 1) || (store_size < 1048576))
 		return;
-	if (scsi_debug_num_parts > SDEBUG_MAX_PARTS) {
-		scsi_debug_num_parts = SDEBUG_MAX_PARTS;
+	if (sdebug_num_parts > SDEBUG_MAX_PARTS) {
+		sdebug_num_parts = SDEBUG_MAX_PARTS;
 		pr_warn("reducing partitions to %d\n", SDEBUG_MAX_PARTS);
 	}
 	num_sectors = (int)sdebug_store_sectors;
 	sectors_per_part = (num_sectors - sdebug_sectors_per)
-			   / scsi_debug_num_parts;
+			   / sdebug_num_parts;
 	heads_by_sects = sdebug_heads * sdebug_sectors_per;
         starts[0] = sdebug_sectors_per;
-	for (k = 1; k < scsi_debug_num_parts; ++k)
+	for (k = 1; k < sdebug_num_parts; ++k)
 		starts[k] = ((k * sectors_per_part) / heads_by_sects)
 			    * heads_by_sects;
-	starts[scsi_debug_num_parts] = num_sectors;
-	starts[scsi_debug_num_parts + 1] = 0;
+	starts[sdebug_num_parts] = num_sectors;
+	starts[sdebug_num_parts + 1] = 0;
 
 	ramp[510] = 0x55;	/* magic partition markings */
 	ramp[511] = 0xAA;
@@ -3934,28 +3801,27 @@ static void __init sdebug_build_parts(unsigned char *ramp,
 	}
 }
 
-static int
-schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
-	      int scsi_result, int delta_jiff)
+static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
+			 int scsi_result, int delta_jiff)
 {
 	unsigned long iflags;
 	int k, num_in_q, qdepth, inject;
 	struct sdebug_queued_cmd *sqcp = NULL;
 	struct scsi_device *sdp;
+	struct sdebug_defer *sd_dp;
 
-	/* this should never happen */
-	if (WARN_ON(!cmnd))
+	if (unlikely(WARN_ON(!cmnd)))
 		return SCSI_MLQUEUE_HOST_BUSY;
 
-	if (NULL == devip) {
-		pr_warn("called devip == NULL\n");
-		/* no particularly good error to report back */
-		return SCSI_MLQUEUE_HOST_BUSY;
+	if (unlikely(devip == NULL)) {
+		if (scsi_result == 0)
+			scsi_result = DID_NO_CONNECT << 16;
+		goto respond_in_thread;
 	}
 
 	sdp = cmnd->device;
 
-	if ((scsi_result) && (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
+	if (unlikely(sdebug_verbose && scsi_result))
 		sdev_printk(KERN_INFO, sdp, "%s: non-zero result=0x%x\n",
 			    __func__, scsi_result);
 	if (delta_jiff == 0)
@@ -3966,35 +3832,35 @@ schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
 	num_in_q = atomic_read(&devip->num_in_q);
 	qdepth = cmnd->device->queue_depth;
 	inject = 0;
-	if ((qdepth > 0) && (num_in_q >= qdepth)) {
+	if (unlikely((qdepth > 0) && (num_in_q >= qdepth))) {
 		if (scsi_result) {
 			spin_unlock_irqrestore(&queued_arr_lock, iflags);
 			goto respond_in_thread;
 		} else
 			scsi_result = device_qfull_result;
-	} else if ((scsi_debug_every_nth != 0) &&
-		   (SCSI_DEBUG_OPT_RARE_TSF & scsi_debug_opts) &&
-		   (scsi_result == 0)) {
+	} else if (unlikely((sdebug_every_nth != 0) &&
+			    (SDEBUG_OPT_RARE_TSF & sdebug_opts) &&
+			    (scsi_result == 0))) {
 		if ((num_in_q == (qdepth - 1)) &&
 		    (atomic_inc_return(&sdebug_a_tsf) >=
-		     abs(scsi_debug_every_nth))) {
+		     abs(sdebug_every_nth))) {
 			atomic_set(&sdebug_a_tsf, 0);
 			inject = 1;
 			scsi_result = device_qfull_result;
 		}
 	}
 
-	k = find_first_zero_bit(queued_in_use_bm, scsi_debug_max_queue);
-	if (k >= scsi_debug_max_queue) {
+	k = find_first_zero_bit(queued_in_use_bm, sdebug_max_queue);
+	if (unlikely(k >= sdebug_max_queue)) {
 		spin_unlock_irqrestore(&queued_arr_lock, iflags);
 		if (scsi_result)
 			goto respond_in_thread;
-		else if (SCSI_DEBUG_OPT_ALL_TSF & scsi_debug_opts)
+		else if (SDEBUG_OPT_ALL_TSF & sdebug_opts)
 			scsi_result = device_qfull_result;
-		if (SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts)
+		if (SDEBUG_OPT_Q_NOISE & sdebug_opts)
 			sdev_printk(KERN_INFO, sdp,
 				    "%s: max_queue=%d exceeded, %s\n",
-				    __func__, scsi_debug_max_queue,
+				    __func__, sdebug_max_queue,
 				    (scsi_result ?  "status: TASK SET FULL" :
 						    "report: host busy"));
 		if (scsi_result)
@@ -4008,49 +3874,41 @@ schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
 	sqcp->a_cmnd = cmnd;
 	cmnd->result = scsi_result;
 	spin_unlock_irqrestore(&queued_arr_lock, iflags);
-	if (delta_jiff > 0) {
-		if (NULL == sqcp->cmnd_timerp) {
-			sqcp->cmnd_timerp = kmalloc(sizeof(struct timer_list),
-						    GFP_ATOMIC);
-			if (NULL == sqcp->cmnd_timerp)
-				return SCSI_MLQUEUE_HOST_BUSY;
-			init_timer(sqcp->cmnd_timerp);
-		}
-		sqcp->cmnd_timerp->function = sdebug_q_cmd_complete;
-		sqcp->cmnd_timerp->data = k;
-		sqcp->cmnd_timerp->expires = get_jiffies_64() + delta_jiff;
-		add_timer(sqcp->cmnd_timerp);
-	} else if (scsi_debug_ndelay > 0) {
-		ktime_t kt = ktime_set(0, scsi_debug_ndelay);
-		struct sdebug_hrtimer *sd_hp = sqcp->sd_hrtp;
-
-		if (NULL == sd_hp) {
-			sd_hp = kmalloc(sizeof(*sd_hp), GFP_ATOMIC);
-			if (NULL == sd_hp)
+	sd_dp = sqcp->sd_dp;
+	if (delta_jiff > 0 || sdebug_ndelay > 0) {
+		ktime_t kt;
+
+		if (delta_jiff > 0) {
+			struct timespec ts;
+
+			jiffies_to_timespec(delta_jiff, &ts);
+			kt = ktime_set(ts.tv_sec, ts.tv_nsec);
+		} else
+			kt = ktime_set(0, sdebug_ndelay);
+		if (NULL == sd_dp) {
+			sd_dp = kzalloc(sizeof(*sd_dp), GFP_ATOMIC);
+			if (NULL == sd_dp)
 				return SCSI_MLQUEUE_HOST_BUSY;
-			sqcp->sd_hrtp = sd_hp;
-			hrtimer_init(&sd_hp->hrt, CLOCK_MONOTONIC,
+			sqcp->sd_dp = sd_dp;
+			hrtimer_init(&sd_dp->hrt, CLOCK_MONOTONIC,
 				     HRTIMER_MODE_REL);
-			sd_hp->hrt.function = sdebug_q_cmd_hrt_complete;
-			sd_hp->qa_indx = k;
+			sd_dp->hrt.function = sdebug_q_cmd_hrt_complete;
+			sd_dp->qa_indx = k;
 		}
-		hrtimer_start(&sd_hp->hrt, kt, HRTIMER_MODE_REL);
-	} else {	/* delay < 0 */
-		if (NULL == sqcp->tletp) {
-			sqcp->tletp = kmalloc(sizeof(*sqcp->tletp),
-					      GFP_ATOMIC);
-			if (NULL == sqcp->tletp)
+		hrtimer_start(&sd_dp->hrt, kt, HRTIMER_MODE_REL);
+	} else {	/* jdelay < 0 */
+		if (NULL == sd_dp) {
+			sd_dp = kzalloc(sizeof(*sqcp->sd_dp), GFP_ATOMIC);
+			if (NULL == sd_dp)
 				return SCSI_MLQUEUE_HOST_BUSY;
-			tasklet_init(sqcp->tletp,
-				     sdebug_q_cmd_complete, k);
+			sqcp->sd_dp = sd_dp;
+			sd_dp->qa_indx = k;
+			INIT_WORK(&sd_dp->ew.work, sdebug_q_cmd_wq_complete);
 		}
-		if (-1 == delta_jiff)
-			tasklet_hi_schedule(sqcp->tletp);
-		else
-			tasklet_schedule(sqcp->tletp);
+		schedule_work(&sd_dp->ew.work);
 	}
-	if ((SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts) &&
-	    (scsi_result == device_qfull_result))
+	if (unlikely((SDEBUG_OPT_Q_NOISE & sdebug_opts) &&
+		     (scsi_result == device_qfull_result)))
 		sdev_printk(KERN_INFO, sdp,
 			    "%s: num_in_q=%d +1, %s%s\n", __func__,
 			    num_in_q, (inject ? "<inject> " : ""),
@@ -4069,52 +3927,52 @@ respond_in_thread:	/* call back to mid-layer using invocation thread */
    as it can when the corresponding attribute in the
    /sys/bus/pseudo/drivers/scsi_debug directory is changed.
  */
-module_param_named(add_host, scsi_debug_add_host, int, S_IRUGO | S_IWUSR);
-module_param_named(ato, scsi_debug_ato, int, S_IRUGO);
-module_param_named(clustering, scsi_debug_clustering, bool, S_IRUGO | S_IWUSR);
-module_param_named(delay, scsi_debug_delay, int, S_IRUGO | S_IWUSR);
-module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, S_IRUGO);
-module_param_named(dif, scsi_debug_dif, int, S_IRUGO);
-module_param_named(dix, scsi_debug_dix, int, S_IRUGO);
-module_param_named(dsense, scsi_debug_dsense, int, S_IRUGO | S_IWUSR);
-module_param_named(every_nth, scsi_debug_every_nth, int, S_IRUGO | S_IWUSR);
-module_param_named(fake_rw, scsi_debug_fake_rw, int, S_IRUGO | S_IWUSR);
-module_param_named(guard, scsi_debug_guard, uint, S_IRUGO);
-module_param_named(host_lock, scsi_debug_host_lock, bool, S_IRUGO | S_IWUSR);
-module_param_named(lbpu, scsi_debug_lbpu, int, S_IRUGO);
-module_param_named(lbpws, scsi_debug_lbpws, int, S_IRUGO);
-module_param_named(lbpws10, scsi_debug_lbpws10, int, S_IRUGO);
-module_param_named(lbprz, scsi_debug_lbprz, int, S_IRUGO);
-module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
-module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR);
-module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR);
-module_param_named(ndelay, scsi_debug_ndelay, int, S_IRUGO | S_IWUSR);
-module_param_named(no_lun_0, scsi_debug_no_lun_0, int, S_IRUGO | S_IWUSR);
-module_param_named(no_uld, scsi_debug_no_uld, int, S_IRUGO);
-module_param_named(num_parts, scsi_debug_num_parts, int, S_IRUGO);
-module_param_named(num_tgts, scsi_debug_num_tgts, int, S_IRUGO | S_IWUSR);
-module_param_named(opt_blks, scsi_debug_opt_blks, int, S_IRUGO);
-module_param_named(opts, scsi_debug_opts, int, S_IRUGO | S_IWUSR);
-module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO);
-module_param_named(ptype, scsi_debug_ptype, int, S_IRUGO | S_IWUSR);
-module_param_named(removable, scsi_debug_removable, bool, S_IRUGO | S_IWUSR);
-module_param_named(scsi_level, scsi_debug_scsi_level, int, S_IRUGO);
-module_param_named(sector_size, scsi_debug_sector_size, int, S_IRUGO);
-module_param_named(strict, scsi_debug_strict, bool, S_IRUGO | S_IWUSR);
-module_param_named(unmap_alignment, scsi_debug_unmap_alignment, int, S_IRUGO);
-module_param_named(unmap_granularity, scsi_debug_unmap_granularity, int, S_IRUGO);
-module_param_named(unmap_max_blocks, scsi_debug_unmap_max_blocks, int, S_IRUGO);
-module_param_named(unmap_max_desc, scsi_debug_unmap_max_desc, int, S_IRUGO);
-module_param_named(virtual_gb, scsi_debug_virtual_gb, int, S_IRUGO | S_IWUSR);
-module_param_named(vpd_use_hostno, scsi_debug_vpd_use_hostno, int,
+module_param_named(add_host, sdebug_add_host, int, S_IRUGO | S_IWUSR);
+module_param_named(ato, sdebug_ato, int, S_IRUGO);
+module_param_named(clustering, sdebug_clustering, bool, S_IRUGO | S_IWUSR);
+module_param_named(delay, sdebug_jdelay, int, S_IRUGO | S_IWUSR);
+module_param_named(dev_size_mb, sdebug_dev_size_mb, int, S_IRUGO);
+module_param_named(dif, sdebug_dif, int, S_IRUGO);
+module_param_named(dix, sdebug_dix, int, S_IRUGO);
+module_param_named(dsense, sdebug_dsense, int, S_IRUGO | S_IWUSR);
+module_param_named(every_nth, sdebug_every_nth, int, S_IRUGO | S_IWUSR);
+module_param_named(fake_rw, sdebug_fake_rw, int, S_IRUGO | S_IWUSR);
+module_param_named(guard, sdebug_guard, uint, S_IRUGO);
+module_param_named(host_lock, sdebug_host_lock, bool, S_IRUGO | S_IWUSR);
+module_param_named(lbpu, sdebug_lbpu, int, S_IRUGO);
+module_param_named(lbpws, sdebug_lbpws, int, S_IRUGO);
+module_param_named(lbpws10, sdebug_lbpws10, int, S_IRUGO);
+module_param_named(lbprz, sdebug_lbprz, int, S_IRUGO);
+module_param_named(lowest_aligned, sdebug_lowest_aligned, int, S_IRUGO);
+module_param_named(max_luns, sdebug_max_luns, int, S_IRUGO | S_IWUSR);
+module_param_named(max_queue, sdebug_max_queue, int, S_IRUGO | S_IWUSR);
+module_param_named(ndelay, sdebug_ndelay, int, S_IRUGO | S_IWUSR);
+module_param_named(no_lun_0, sdebug_no_lun_0, int, S_IRUGO | S_IWUSR);
+module_param_named(no_uld, sdebug_no_uld, int, S_IRUGO);
+module_param_named(num_parts, sdebug_num_parts, int, S_IRUGO);
+module_param_named(num_tgts, sdebug_num_tgts, int, S_IRUGO | S_IWUSR);
+module_param_named(opt_blks, sdebug_opt_blks, int, S_IRUGO);
+module_param_named(opts, sdebug_opts, int, S_IRUGO | S_IWUSR);
+module_param_named(physblk_exp, sdebug_physblk_exp, int, S_IRUGO);
+module_param_named(ptype, sdebug_ptype, int, S_IRUGO | S_IWUSR);
+module_param_named(removable, sdebug_removable, bool, S_IRUGO | S_IWUSR);
+module_param_named(scsi_level, sdebug_scsi_level, int, S_IRUGO);
+module_param_named(sector_size, sdebug_sector_size, int, S_IRUGO);
+module_param_named(strict, sdebug_strict, bool, S_IRUGO | S_IWUSR);
+module_param_named(unmap_alignment, sdebug_unmap_alignment, int, S_IRUGO);
+module_param_named(unmap_granularity, sdebug_unmap_granularity, int, S_IRUGO);
+module_param_named(unmap_max_blocks, sdebug_unmap_max_blocks, int, S_IRUGO);
+module_param_named(unmap_max_desc, sdebug_unmap_max_desc, int, S_IRUGO);
+module_param_named(virtual_gb, sdebug_virtual_gb, int, S_IRUGO | S_IWUSR);
+module_param_named(vpd_use_hostno, sdebug_vpd_use_hostno, int,
 		   S_IRUGO | S_IWUSR);
-module_param_named(write_same_length, scsi_debug_write_same_length, int,
+module_param_named(write_same_length, sdebug_write_same_length, int,
 		   S_IRUGO | S_IWUSR);
 
 MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
 MODULE_DESCRIPTION("SCSI debug adapter driver");
 MODULE_LICENSE("GPL");
-MODULE_VERSION(SCSI_DEBUG_VERSION);
+MODULE_VERSION(SDEBUG_VERSION);
 
 MODULE_PARM_DESC(add_host, "0..127 hosts allowed(def=1)");
 MODULE_PARM_DESC(ato, "application tag ownership: 0=disk 1=host (def=1)");
@@ -4127,7 +3985,7 @@ MODULE_PARM_DESC(dsense, "use descriptor sense format(def=0 -> fixed)");
 MODULE_PARM_DESC(every_nth, "timeout every nth command(def=0)");
 MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)");
 MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
-MODULE_PARM_DESC(host_lock, "use host_lock around all commands (def=0)");
+MODULE_PARM_DESC(host_lock, "host_lock is ignored (def=0)");
 MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
 MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
 MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
@@ -4160,15 +4018,16 @@ static char sdebug_info[256];
 
 static const char * scsi_debug_info(struct Scsi_Host * shp)
 {
-	sprintf(sdebug_info, "scsi_debug, version %s [%s], "
-		"dev_size_mb=%d, opts=0x%x", SCSI_DEBUG_VERSION,
-		scsi_debug_version_date, scsi_debug_dev_size_mb,
-		scsi_debug_opts);
+	sprintf(sdebug_info,
+		"scsi_debug, version %s [%s], dev_size_mb=%d, opts=0x%x",
+		SDEBUG_VERSION, sdebug_version_date, sdebug_dev_size_mb,
+		sdebug_opts);
 	return sdebug_info;
 }
 
 /* 'echo <val> > /proc/scsi/scsi_debug/<host_id>' writes to opts */
-static int scsi_debug_write_info(struct Scsi_Host *host, char *buffer, int length)
+static int scsi_debug_write_info(struct Scsi_Host *host, char *buffer,
+				 int length)
 {
 	char arr[16];
 	int opts;
@@ -4180,8 +4039,10 @@ static int scsi_debug_write_info(struct Scsi_Host *host, char *buffer, int lengt
 	arr[minLen] = '\0';
 	if (1 != sscanf(arr, "%d", &opts))
 		return -EINVAL;
-	scsi_debug_opts = opts;
-	if (scsi_debug_every_nth != 0)
+	sdebug_opts = opts;
+	sdebug_verbose = !!(SDEBUG_OPT_NOISE & opts);
+	sdebug_any_injecting_opt = !!(SDEBUG_OPT_ALL_INJECTING & opts);
+	if (sdebug_every_nth != 0)
 		atomic_set(&sdebug_cmnd_count, 0);
 	return length;
 }
@@ -4194,9 +4055,9 @@ static int scsi_debug_show_info(struct seq_file *m, struct Scsi_Host *host)
 	int f, l;
 	char b[32];
 
-	if (scsi_debug_every_nth > 0)
+	if (sdebug_every_nth > 0)
 		snprintf(b, sizeof(b), " (curr:%d)",
-			 ((SCSI_DEBUG_OPT_RARE_TSF & scsi_debug_opts) ?
+			 ((SDEBUG_OPT_RARE_TSF & sdebug_opts) ?
 				atomic_read(&sdebug_a_tsf) :
 				atomic_read(&sdebug_cmnd_count)));
 	else
@@ -4210,18 +4071,18 @@ static int scsi_debug_show_info(struct seq_file *m, struct Scsi_Host *host)
 		"command aborts=%d; RESETs: device=%d, target=%d, bus=%d, "
 		"host=%d\ndix_reads=%d dix_writes=%d dif_errors=%d "
 		"usec_in_jiffy=%lu\n",
-		SCSI_DEBUG_VERSION, scsi_debug_version_date,
-		scsi_debug_num_tgts, scsi_debug_dev_size_mb, scsi_debug_opts,
-		scsi_debug_every_nth, b, scsi_debug_delay, scsi_debug_ndelay,
-		scsi_debug_max_luns, atomic_read(&sdebug_completions),
-		scsi_debug_sector_size, sdebug_cylinders_per, sdebug_heads,
+		SDEBUG_VERSION, sdebug_version_date,
+		sdebug_num_tgts, sdebug_dev_size_mb, sdebug_opts,
+		sdebug_every_nth, b, sdebug_jdelay, sdebug_ndelay,
+		sdebug_max_luns, atomic_read(&sdebug_completions),
+		sdebug_sector_size, sdebug_cylinders_per, sdebug_heads,
 		sdebug_sectors_per, num_aborts, num_dev_resets,
 		num_target_resets, num_bus_resets, num_host_resets,
 		dix_reads, dix_writes, dif_errors, TICK_NSEC / 1000);
 
-	f = find_first_bit(queued_in_use_bm, scsi_debug_max_queue);
-	if (f != scsi_debug_max_queue) {
-		l = find_last_bit(queued_in_use_bm, scsi_debug_max_queue);
+	f = find_first_bit(queued_in_use_bm, sdebug_max_queue);
+	if (f != sdebug_max_queue) {
+		l = find_last_bit(queued_in_use_bm, sdebug_max_queue);
 		seq_printf(m, "   %s BUSY: first,last bits set: %d,%d\n",
 			   "queued_in_use_bm", f, l);
 	}
@@ -4230,28 +4091,30 @@ static int scsi_debug_show_info(struct seq_file *m, struct Scsi_Host *host)
 
 static ssize_t delay_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_delay);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_jdelay);
 }
-/* Returns -EBUSY if delay is being changed and commands are queued */
+/* Returns -EBUSY if jdelay is being changed and commands are queued */
 static ssize_t delay_store(struct device_driver *ddp, const char *buf,
 			   size_t count)
 {
-	int delay, res;
+	int jdelay, res;
 
-	if ((count > 0) && (1 == sscanf(buf, "%d", &delay))) {
+	if (count > 0 && sscanf(buf, "%d", &jdelay) == 1) {
 		res = count;
-		if (scsi_debug_delay != delay) {
+		if (sdebug_jdelay != jdelay) {
 			unsigned long iflags;
 			int k;
 
 			spin_lock_irqsave(&queued_arr_lock, iflags);
-			k = find_first_bit(queued_in_use_bm,
-					   scsi_debug_max_queue);
-			if (k != scsi_debug_max_queue)
+			k = find_first_bit(queued_in_use_bm, sdebug_max_queue);
+			if (k != sdebug_max_queue)
 				res = -EBUSY;	/* have queued commands */
 			else {
-				scsi_debug_delay = delay;
-				scsi_debug_ndelay = 0;
+				/* make sure sdebug_defer instances get
+				 * re-allocated for new delay variant */
+				free_all_queued();
+				sdebug_jdelay = jdelay;
+				sdebug_ndelay = 0;
 			}
 			spin_unlock_irqrestore(&queued_arr_lock, iflags);
 		}
@@ -4263,12 +4126,12 @@ static DRIVER_ATTR_RW(delay);
 
 static ssize_t ndelay_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ndelay);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_ndelay);
 }
 /* Returns -EBUSY if ndelay is being changed and commands are queued */
-/* If > 0 and accepted then scsi_debug_delay is set to DELAY_OVERRIDDEN */
+/* If > 0 and accepted then sdebug_jdelay is set to JDELAY_OVERRIDDEN */
 static ssize_t ndelay_store(struct device_driver *ddp, const char *buf,
-			   size_t count)
+			    size_t count)
 {
 	unsigned long iflags;
 	int ndelay, res, k;
@@ -4276,16 +4139,18 @@ static ssize_t ndelay_store(struct device_driver *ddp, const char *buf,
 	if ((count > 0) && (1 == sscanf(buf, "%d", &ndelay)) &&
 	    (ndelay >= 0) && (ndelay < 1000000000)) {
 		res = count;
-		if (scsi_debug_ndelay != ndelay) {
+		if (sdebug_ndelay != ndelay) {
 			spin_lock_irqsave(&queued_arr_lock, iflags);
-			k = find_first_bit(queued_in_use_bm,
-					   scsi_debug_max_queue);
-			if (k != scsi_debug_max_queue)
+			k = find_first_bit(queued_in_use_bm, sdebug_max_queue);
+			if (k != sdebug_max_queue)
 				res = -EBUSY;	/* have queued commands */
 			else {
-				scsi_debug_ndelay = ndelay;
-				scsi_debug_delay = ndelay ? DELAY_OVERRIDDEN
-							  : DEF_DELAY;
+				/* make sure sdebug_defer instances get
+				 * re-allocated for new delay variant */
+				free_all_queued();
+				sdebug_ndelay = ndelay;
+				sdebug_jdelay = ndelay  ? JDELAY_OVERRIDDEN
+							: DEF_JDELAY;
 			}
 			spin_unlock_irqrestore(&queued_arr_lock, iflags);
 		}
@@ -4297,7 +4162,7 @@ static DRIVER_ATTR_RW(ndelay);
 
 static ssize_t opts_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "0x%x\n", scsi_debug_opts);
+	return scnprintf(buf, PAGE_SIZE, "0x%x\n", sdebug_opts);
 }
 
 static ssize_t opts_store(struct device_driver *ddp, const char *buf,
@@ -4317,17 +4182,9 @@ static ssize_t opts_store(struct device_driver *ddp, const char *buf,
 	}
 	return -EINVAL;
 opts_done:
-	scsi_debug_opts = opts;
-	if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
-		sdebug_any_injecting_opt = true;
+	sdebug_opts = opts;
+	sdebug_verbose = !!(SDEBUG_OPT_NOISE & opts);
+	sdebug_any_injecting_opt = !!(SDEBUG_OPT_ALL_INJECTING & opts);
 	atomic_set(&sdebug_cmnd_count, 0);
 	atomic_set(&sdebug_a_tsf, 0);
 	return count;
@@ -4336,7 +4193,7 @@ static DRIVER_ATTR_RW(opts);
 
 static ssize_t ptype_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ptype);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_ptype);
 }
 static ssize_t ptype_store(struct device_driver *ddp, const char *buf,
 			   size_t count)
@@ -4344,7 +4201,7 @@ static ssize_t ptype_store(struct device_driver *ddp, const char *buf,
         int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		scsi_debug_ptype = n;
+		sdebug_ptype = n;
 		return count;
 	}
 	return -EINVAL;
@@ -4353,7 +4210,7 @@ static DRIVER_ATTR_RW(ptype);
 
 static ssize_t dsense_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dsense);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_dsense);
 }
 static ssize_t dsense_store(struct device_driver *ddp, const char *buf,
 			    size_t count)
@@ -4361,7 +4218,7 @@ static ssize_t dsense_store(struct device_driver *ddp, const char *buf,
         int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		scsi_debug_dsense = n;
+		sdebug_dsense = n;
 		return count;
 	}
 	return -EINVAL;
@@ -4370,7 +4227,7 @@ static DRIVER_ATTR_RW(dsense);
 
 static ssize_t fake_rw_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_fake_rw);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_fake_rw);
 }
 static ssize_t fake_rw_store(struct device_driver *ddp, const char *buf,
 			     size_t count)
@@ -4379,11 +4236,11 @@ static ssize_t fake_rw_store(struct device_driver *ddp, const char *buf,
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
 		n = (n > 0);
-		scsi_debug_fake_rw = (scsi_debug_fake_rw > 0);
-		if (scsi_debug_fake_rw != n) {
+		sdebug_fake_rw = (sdebug_fake_rw > 0);
+		if (sdebug_fake_rw != n) {
 			if ((0 == n) && (NULL == fake_storep)) {
 				unsigned long sz =
-					(unsigned long)scsi_debug_dev_size_mb *
+					(unsigned long)sdebug_dev_size_mb *
 					1048576;
 
 				fake_storep = vmalloc(sz);
@@ -4393,7 +4250,7 @@ static ssize_t fake_rw_store(struct device_driver *ddp, const char *buf,
 				}
 				memset(fake_storep, 0, sz);
 			}
-			scsi_debug_fake_rw = n;
+			sdebug_fake_rw = n;
 		}
 		return count;
 	}
@@ -4403,7 +4260,7 @@ static DRIVER_ATTR_RW(fake_rw);
 
 static ssize_t no_lun_0_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_lun_0);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_no_lun_0);
 }
 static ssize_t no_lun_0_store(struct device_driver *ddp, const char *buf,
 			      size_t count)
@@ -4411,7 +4268,7 @@ static ssize_t no_lun_0_store(struct device_driver *ddp, const char *buf,
         int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		scsi_debug_no_lun_0 = n;
+		sdebug_no_lun_0 = n;
 		return count;
 	}
 	return -EINVAL;
@@ -4420,7 +4277,7 @@ static DRIVER_ATTR_RW(no_lun_0);
 
 static ssize_t num_tgts_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_tgts);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_num_tgts);
 }
 static ssize_t num_tgts_store(struct device_driver *ddp, const char *buf,
 			      size_t count)
@@ -4428,7 +4285,7 @@ static ssize_t num_tgts_store(struct device_driver *ddp, const char *buf,
         int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		scsi_debug_num_tgts = n;
+		sdebug_num_tgts = n;
 		sdebug_max_tgts_luns();
 		return count;
 	}
@@ -4438,19 +4295,19 @@ static DRIVER_ATTR_RW(num_tgts);
 
 static ssize_t dev_size_mb_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dev_size_mb);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_dev_size_mb);
 }
 static DRIVER_ATTR_RO(dev_size_mb);
 
 static ssize_t num_parts_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_parts);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_num_parts);
 }
 static DRIVER_ATTR_RO(num_parts);
 
 static ssize_t every_nth_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_every_nth);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_every_nth);
 }
 static ssize_t every_nth_store(struct device_driver *ddp, const char *buf,
 			       size_t count)
@@ -4458,7 +4315,7 @@ static ssize_t every_nth_store(struct device_driver *ddp, const char *buf,
         int nth;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &nth))) {
-		scsi_debug_every_nth = nth;
+		sdebug_every_nth = nth;
 		atomic_set(&sdebug_cmnd_count, 0);
 		return count;
 	}
@@ -4468,7 +4325,7 @@ static DRIVER_ATTR_RW(every_nth);
 
 static ssize_t max_luns_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_max_luns);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_max_luns);
 }
 static ssize_t max_luns_store(struct device_driver *ddp, const char *buf,
 			      size_t count)
@@ -4477,10 +4334,14 @@ static ssize_t max_luns_store(struct device_driver *ddp, const char *buf,
 	bool changed;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		changed = (scsi_debug_max_luns != n);
-		scsi_debug_max_luns = n;
+		if (n > 256) {
+			pr_warn("max_luns can be no more than 256\n");
+			return -EINVAL;
+		}
+		changed = (sdebug_max_luns != n);
+		sdebug_max_luns = n;
 		sdebug_max_tgts_luns();
-		if (changed && (scsi_debug_scsi_level >= 5)) {	/* >= SPC-3 */
+		if (changed && (sdebug_scsi_level >= 5)) {	/* >= SPC-3 */
 			struct sdebug_host_info *sdhp;
 			struct sdebug_dev_info *dp;
 
@@ -4503,7 +4364,7 @@ static DRIVER_ATTR_RW(max_luns);
 
 static ssize_t max_queue_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_max_queue);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_max_queue);
 }
 /* N.B. max_queue can be changed while there are queued commands. In flight
  * commands beyond the new max_queue will be completed. */
@@ -4517,7 +4378,7 @@ static ssize_t max_queue_store(struct device_driver *ddp, const char *buf,
 	    (n <= SCSI_DEBUG_CANQUEUE)) {
 		spin_lock_irqsave(&queued_arr_lock, iflags);
 		k = find_last_bit(queued_in_use_bm, SCSI_DEBUG_CANQUEUE);
-		scsi_debug_max_queue = n;
+		sdebug_max_queue = n;
 		if (SCSI_DEBUG_CANQUEUE == k)
 			atomic_set(&retired_max_queue, 0);
 		else if (k >= n)
@@ -4533,19 +4394,19 @@ static DRIVER_ATTR_RW(max_queue);
 
 static ssize_t no_uld_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_uld);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_no_uld);
 }
 static DRIVER_ATTR_RO(no_uld);
 
 static ssize_t scsi_level_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_scsi_level);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_scsi_level);
 }
 static DRIVER_ATTR_RO(scsi_level);
 
 static ssize_t virtual_gb_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_virtual_gb);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_virtual_gb);
 }
 static ssize_t virtual_gb_store(struct device_driver *ddp, const char *buf,
 				size_t count)
@@ -4554,8 +4415,8 @@ static ssize_t virtual_gb_store(struct device_driver *ddp, const char *buf,
 	bool changed;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		changed = (scsi_debug_virtual_gb != n);
-		scsi_debug_virtual_gb = n;
+		changed = (sdebug_virtual_gb != n);
+		sdebug_virtual_gb = n;
 		sdebug_capacity = get_sdebug_capacity();
 		if (changed) {
 			struct sdebug_host_info *sdhp;
@@ -4580,9 +4441,12 @@ static DRIVER_ATTR_RW(virtual_gb);
 
 static ssize_t add_host_show(struct device_driver *ddp, char *buf)
 {
-        return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_add_host);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_add_host);
 }
 
+static int sdebug_add_adapter(void);
+static void sdebug_remove_adapter(void);
+
 static ssize_t add_host_store(struct device_driver *ddp, const char *buf,
 			      size_t count)
 {
@@ -4605,7 +4469,7 @@ static DRIVER_ATTR_RW(add_host);
 
 static ssize_t vpd_use_hostno_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_vpd_use_hostno);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_vpd_use_hostno);
 }
 static ssize_t vpd_use_hostno_store(struct device_driver *ddp, const char *buf,
 				    size_t count)
@@ -4613,7 +4477,7 @@ static ssize_t vpd_use_hostno_store(struct device_driver *ddp, const char *buf,
 	int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		scsi_debug_vpd_use_hostno = n;
+		sdebug_vpd_use_hostno = n;
 		return count;
 	}
 	return -EINVAL;
@@ -4622,31 +4486,31 @@ static DRIVER_ATTR_RW(vpd_use_hostno);
 
 static ssize_t sector_size_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%u\n", scsi_debug_sector_size);
+	return scnprintf(buf, PAGE_SIZE, "%u\n", sdebug_sector_size);
 }
 static DRIVER_ATTR_RO(sector_size);
 
 static ssize_t dix_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dix);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_dix);
 }
 static DRIVER_ATTR_RO(dix);
 
 static ssize_t dif_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dif);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_dif);
 }
 static DRIVER_ATTR_RO(dif);
 
 static ssize_t guard_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%u\n", scsi_debug_guard);
+	return scnprintf(buf, PAGE_SIZE, "%u\n", sdebug_guard);
 }
 static DRIVER_ATTR_RO(guard);
 
 static ssize_t ato_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ato);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_ato);
 }
 static DRIVER_ATTR_RO(ato);
 
@@ -4669,7 +4533,7 @@ static DRIVER_ATTR_RO(map);
 
 static ssize_t removable_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_removable ? 1 : 0);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_removable ? 1 : 0);
 }
 static ssize_t removable_store(struct device_driver *ddp, const char *buf,
 			       size_t count)
@@ -4677,7 +4541,7 @@ static ssize_t removable_store(struct device_driver *ddp, const char *buf,
 	int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		scsi_debug_removable = (n > 0);
+		sdebug_removable = (n > 0);
 		return count;
 	}
 	return -EINVAL;
@@ -4686,32 +4550,17 @@ static DRIVER_ATTR_RW(removable);
 
 static ssize_t host_lock_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", !!scsi_debug_host_lock);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", !!sdebug_host_lock);
 }
-/* Returns -EBUSY if host_lock is being changed and commands are queued */
+/* N.B. sdebug_host_lock does nothing, kept for backward compatibility */
 static ssize_t host_lock_store(struct device_driver *ddp, const char *buf,
 			       size_t count)
 {
-	int n, res;
+	int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		bool new_host_lock = (n > 0);
-
-		res = count;
-		if (new_host_lock != scsi_debug_host_lock) {
-			unsigned long iflags;
-			int k;
-
-			spin_lock_irqsave(&queued_arr_lock, iflags);
-			k = find_first_bit(queued_in_use_bm,
-					   scsi_debug_max_queue);
-			if (k != scsi_debug_max_queue)
-				res = -EBUSY;	/* have queued commands */
-			else
-				scsi_debug_host_lock = new_host_lock;
-			spin_unlock_irqrestore(&queued_arr_lock, iflags);
-		}
-		return res;
+		sdebug_host_lock = (n > 0);
+		return count;
 	}
 	return -EINVAL;
 }
@@ -4719,7 +4568,7 @@ static DRIVER_ATTR_RW(host_lock);
 
 static ssize_t strict_show(struct device_driver *ddp, char *buf)
 {
-	return scnprintf(buf, PAGE_SIZE, "%d\n", !!scsi_debug_strict);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", !!sdebug_strict);
 }
 static ssize_t strict_store(struct device_driver *ddp, const char *buf,
 			    size_t count)
@@ -4727,7 +4576,7 @@ static ssize_t strict_store(struct device_driver *ddp, const char *buf,
 	int n;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
-		scsi_debug_strict = (n > 0);
+		sdebug_strict = (n > 0);
 		return count;
 	}
 	return -EINVAL;
@@ -4787,29 +4636,31 @@ static int __init scsi_debug_init(void)
 	atomic_set(&sdebug_completions, 0);
 	atomic_set(&retired_max_queue, 0);
 
-	if (scsi_debug_ndelay >= 1000000000) {
+	if (sdebug_ndelay >= 1000 * 1000 * 1000) {
 		pr_warn("ndelay must be less than 1 second, ignored\n");
-		scsi_debug_ndelay = 0;
-	} else if (scsi_debug_ndelay > 0)
-		scsi_debug_delay = DELAY_OVERRIDDEN;
+		sdebug_ndelay = 0;
+	} else if (sdebug_ndelay > 0)
+		sdebug_jdelay = JDELAY_OVERRIDDEN;
 
-	switch (scsi_debug_sector_size) {
+	switch (sdebug_sector_size) {
 	case  512:
 	case 1024:
 	case 2048:
 	case 4096:
 		break;
 	default:
-		pr_err("invalid sector_size %d\n", scsi_debug_sector_size);
+		pr_err("invalid sector_size %d\n", sdebug_sector_size);
 		return -EINVAL;
 	}
 
-	switch (scsi_debug_dif) {
+	switch (sdebug_dif) {
 
 	case SD_DIF_TYPE0_PROTECTION:
+		break;
 	case SD_DIF_TYPE1_PROTECTION:
 	case SD_DIF_TYPE2_PROTECTION:
 	case SD_DIF_TYPE3_PROTECTION:
+		have_dif_prot = true;
 		break;
 
 	default:
@@ -4817,39 +4668,42 @@ static int __init scsi_debug_init(void)
 		return -EINVAL;
 	}
 
-	if (scsi_debug_guard > 1) {
+	if (sdebug_guard > 1) {
 		pr_err("guard must be 0 or 1\n");
 		return -EINVAL;
 	}
 
-	if (scsi_debug_ato > 1) {
+	if (sdebug_ato > 1) {
 		pr_err("ato must be 0 or 1\n");
 		return -EINVAL;
 	}
 
-	if (scsi_debug_physblk_exp > 15) {
-		pr_err("invalid physblk_exp %u\n", scsi_debug_physblk_exp);
+	if (sdebug_physblk_exp > 15) {
+		pr_err("invalid physblk_exp %u\n", sdebug_physblk_exp);
 		return -EINVAL;
 	}
+	if (sdebug_max_luns > 256) {
+		pr_warn("max_luns can be no more than 256, use default\n");
+		sdebug_max_luns = DEF_MAX_LUNS;
+	}
 
-	if (scsi_debug_lowest_aligned > 0x3fff) {
-		pr_err("lowest_aligned too big: %u\n",
-			scsi_debug_lowest_aligned);
+	if (sdebug_lowest_aligned > 0x3fff) {
+		pr_err("lowest_aligned too big: %u\n", sdebug_lowest_aligned);
 		return -EINVAL;
 	}
 
-	if (scsi_debug_dev_size_mb < 1)
-		scsi_debug_dev_size_mb = 1;  /* force minimum 1 MB ramdisk */
-	sz = (unsigned long)scsi_debug_dev_size_mb * 1048576;
-	sdebug_store_sectors = sz / scsi_debug_sector_size;
+	if (sdebug_dev_size_mb < 1)
+		sdebug_dev_size_mb = 1;  /* force minimum 1 MB ramdisk */
+	sz = (unsigned long)sdebug_dev_size_mb * 1048576;
+	sdebug_store_sectors = sz / sdebug_sector_size;
 	sdebug_capacity = get_sdebug_capacity();
 
 	/* play around with geometry, don't waste too much on track 0 */
 	sdebug_heads = 8;
 	sdebug_sectors_per = 32;
-	if (scsi_debug_dev_size_mb >= 256)
+	if (sdebug_dev_size_mb >= 256)
 		sdebug_heads = 64;
-	else if (scsi_debug_dev_size_mb >= 16)
+	else if (sdebug_dev_size_mb >= 16)
 		sdebug_heads = 32;
 	sdebug_cylinders_per = (unsigned long)sdebug_capacity /
 			       (sdebug_sectors_per * sdebug_heads);
@@ -4861,18 +4715,18 @@ static int __init scsi_debug_init(void)
 			       (sdebug_sectors_per * sdebug_heads);
 	}
 
-	if (0 == scsi_debug_fake_rw) {
+	if (sdebug_fake_rw == 0) {
 		fake_storep = vmalloc(sz);
 		if (NULL == fake_storep) {
 			pr_err("out of memory, 1\n");
 			return -ENOMEM;
 		}
 		memset(fake_storep, 0, sz);
-		if (scsi_debug_num_parts > 0)
+		if (sdebug_num_parts > 0)
 			sdebug_build_parts(fake_storep, sz);
 	}
 
-	if (scsi_debug_dix) {
+	if (sdebug_dix) {
 		int dif_size;
 
 		dif_size = sdebug_store_sectors * sizeof(struct sd_dif_tuple);
@@ -4891,18 +4745,18 @@ static int __init scsi_debug_init(void)
 
 	/* Logical Block Provisioning */
 	if (scsi_debug_lbp()) {
-		scsi_debug_unmap_max_blocks =
-			clamp(scsi_debug_unmap_max_blocks, 0U, 0xffffffffU);
+		sdebug_unmap_max_blocks =
+			clamp(sdebug_unmap_max_blocks, 0U, 0xffffffffU);
 
-		scsi_debug_unmap_max_desc =
-			clamp(scsi_debug_unmap_max_desc, 0U, 256U);
+		sdebug_unmap_max_desc =
+			clamp(sdebug_unmap_max_desc, 0U, 256U);
 
-		scsi_debug_unmap_granularity =
-			clamp(scsi_debug_unmap_granularity, 1U, 0xffffffffU);
+		sdebug_unmap_granularity =
+			clamp(sdebug_unmap_granularity, 1U, 0xffffffffU);
 
-		if (scsi_debug_unmap_alignment &&
-		    scsi_debug_unmap_granularity <=
-		    scsi_debug_unmap_alignment) {
+		if (sdebug_unmap_alignment &&
+		    sdebug_unmap_granularity <=
+		    sdebug_unmap_alignment) {
 			pr_err("ERR: unmap_granularity <= unmap_alignment\n");
 			return -EINVAL;
 		}
@@ -4921,7 +4775,7 @@ static int __init scsi_debug_init(void)
 		bitmap_zero(map_storep, map_size);
 
 		/* Map first 1KB for partition table */
-		if (scsi_debug_num_parts)
+		if (sdebug_num_parts)
 			map_region(0, 2);
 	}
 
@@ -4942,8 +4796,8 @@ static int __init scsi_debug_init(void)
 		goto bus_unreg;
 	}
 
-	host_to_add = scsi_debug_add_host;
-        scsi_debug_add_host = 0;
+	host_to_add = sdebug_add_host;
+	sdebug_add_host = 0;
 
         for (k = 0; k < host_to_add; k++) {
                 if (sdebug_add_adapter()) {
@@ -4952,8 +4806,8 @@ static int __init scsi_debug_init(void)
                 }
         }
 
-	if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
-		pr_info("built %d host(s)\n", scsi_debug_add_host);
+	if (sdebug_verbose)
+		pr_info("built %d host(s)\n", sdebug_add_host);
 
 	return 0;
 
@@ -4971,7 +4825,7 @@ free_vm:
 
 static void __exit scsi_debug_exit(void)
 {
-	int k = scsi_debug_add_host;
+	int k = sdebug_add_host;
 
 	stop_all_queued();
 	free_all_queued();
@@ -5011,7 +4865,7 @@ static int sdebug_add_adapter(void)
 
         INIT_LIST_HEAD(&sdbg_host->dev_info_list);
 
-	devs_per_host = scsi_debug_num_tgts * scsi_debug_max_luns;
+	devs_per_host = sdebug_num_tgts * sdebug_max_luns;
         for (k = 0; k < devs_per_host; k++) {
 		sdbg_devinfo = sdebug_device_create(sdbg_host, GFP_KERNEL);
 		if (!sdbg_devinfo) {
@@ -5028,14 +4882,14 @@ static int sdebug_add_adapter(void)
         sdbg_host->dev.bus = &pseudo_lld_bus;
         sdbg_host->dev.parent = pseudo_primary;
         sdbg_host->dev.release = &sdebug_release_adapter;
-        dev_set_name(&sdbg_host->dev, "adapter%d", scsi_debug_add_host);
+	dev_set_name(&sdbg_host->dev, "adapter%d", sdebug_add_host);
 
         error = device_register(&sdbg_host->dev);
 
         if (error)
 		goto clean;
 
-	++scsi_debug_add_host;
+	++sdebug_add_host;
         return error;
 
 clean:
@@ -5064,12 +4918,11 @@ static void sdebug_remove_adapter(void)
 	if (!sdbg_host)
 		return;
 
-        device_unregister(&sdbg_host->dev);
-        --scsi_debug_add_host;
+	device_unregister(&sdbg_host->dev);
+	--sdebug_add_host;
 }
 
-static int
-sdebug_change_qdepth(struct scsi_device *sdev, int qdepth)
+static int sdebug_change_qdepth(struct scsi_device *sdev, int qdepth)
 {
 	int num_in_q = 0;
 	unsigned long iflags;
@@ -5091,7 +4944,7 @@ sdebug_change_qdepth(struct scsi_device *sdev, int qdepth)
 		qdepth = SCSI_DEBUG_CANQUEUE + 10;
 	scsi_change_queue_depth(sdev, qdepth);
 
-	if (SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts) {
+	if (SDEBUG_OPT_Q_NOISE & sdebug_opts) {
 		sdev_printk(KERN_INFO, sdev,
 			    "%s: qdepth=%d, num_in_q=%d\n",
 			    __func__, qdepth, num_in_q);
@@ -5099,43 +4952,39 @@ sdebug_change_qdepth(struct scsi_device *sdev, int qdepth)
 	return sdev->queue_depth;
 }
 
-static int
-check_inject(struct scsi_cmnd *scp)
+static int check_inject(struct scsi_cmnd *scp)
 {
 	struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
 
 	memset(ep, 0, sizeof(struct sdebug_scmd_extra_t));
 
-	if (atomic_inc_return(&sdebug_cmnd_count) >=
-	    abs(scsi_debug_every_nth)) {
+	if (atomic_inc_return(&sdebug_cmnd_count) >= abs(sdebug_every_nth)) {
 		atomic_set(&sdebug_cmnd_count, 0);
-		if (scsi_debug_every_nth < -1)
-			scsi_debug_every_nth = -1;
-		if (SCSI_DEBUG_OPT_TIMEOUT & scsi_debug_opts)
+		if (sdebug_every_nth < -1)
+			sdebug_every_nth = -1;
+		if (SDEBUG_OPT_TIMEOUT & sdebug_opts)
 			return 1; /* ignore command causing timeout */
-		else if (SCSI_DEBUG_OPT_MAC_TIMEOUT & scsi_debug_opts &&
+		else if (SDEBUG_OPT_MAC_TIMEOUT & sdebug_opts &&
 			 scsi_medium_access_command(scp))
 			return 1; /* time out reads and writes */
 		if (sdebug_any_injecting_opt) {
-			int opts = scsi_debug_opts;
-
-			if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
+			if (SDEBUG_OPT_RECOVERED_ERR & sdebug_opts)
 				ep->inj_recovered = true;
-			else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
+			if (SDEBUG_OPT_TRANSPORT_ERR & sdebug_opts)
 				ep->inj_transport = true;
-			else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
+			if (SDEBUG_OPT_DIF_ERR & sdebug_opts)
 				ep->inj_dif = true;
-			else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
+			if (SDEBUG_OPT_DIX_ERR & sdebug_opts)
 				ep->inj_dix = true;
-			else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
+			if (SDEBUG_OPT_SHORT_TRANSFER & sdebug_opts)
 				ep->inj_short = true;
 		}
 	}
 	return 0;
 }
 
-static int
-scsi_debug_queuecommand(struct scsi_cmnd *scp)
+static int scsi_debug_queuecommand(struct Scsi_Host *shost,
+				   struct scsi_cmnd *scp)
 {
 	u8 sdeb_i;
 	struct scsi_device *sdp = scp->device;
@@ -5146,15 +4995,14 @@ scsi_debug_queuecommand(struct scsi_cmnd *scp)
 	int (*r_pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
 	int k, na;
 	int errsts = 0;
-	int errsts_no_connect = DID_NO_CONNECT << 16;
 	u32 flags;
 	u16 sa;
 	u8 opcode = cmd[0];
 	bool has_wlun_rl;
-	bool debug = !!(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts);
 
 	scsi_set_resid(scp, 0);
-	if (debug && !(SCSI_DEBUG_OPT_NO_CDB_NOISE & scsi_debug_opts)) {
+	if (unlikely(sdebug_verbose &&
+		     !(SDEBUG_OPT_NO_CDB_NOISE & sdebug_opts))) {
 		char b[120];
 		int n, len, sb;
 
@@ -5170,16 +5018,16 @@ scsi_debug_queuecommand(struct scsi_cmnd *scp)
 		sdev_printk(KERN_INFO, sdp, "%s: cmd %s\n", my_name, b);
 	}
 	has_wlun_rl = (sdp->lun == SCSI_W_LUN_REPORT_LUNS);
-	if ((sdp->lun >= scsi_debug_max_luns) && !has_wlun_rl)
-		return schedule_resp(scp, NULL, errsts_no_connect, 0);
+	if (unlikely((sdp->lun >= sdebug_max_luns) && !has_wlun_rl))
+		goto err_out;
 
 	sdeb_i = opcode_ind_arr[opcode];	/* fully mapped */
 	oip = &opcode_info_arr[sdeb_i];		/* safe if table consistent */
 	devip = (struct sdebug_dev_info *)sdp->hostdata;
-	if (!devip) {
-		devip = devInfoReg(sdp);
+	if (unlikely(!devip)) {
+		devip = find_build_dev_info(sdp);
 		if (NULL == devip)
-			return schedule_resp(scp, NULL, errsts_no_connect, 0);
+			goto err_out;
 	}
 	na = oip->num_attached;
 	r_pfp = oip->pfp;
@@ -5211,18 +5059,18 @@ scsi_debug_queuecommand(struct scsi_cmnd *scp)
 		}
 	}	/* else (when na==0) we assume the oip is a match */
 	flags = oip->flags;
-	if (F_INV_OP & flags) {
+	if (unlikely(F_INV_OP & flags)) {
 		mk_sense_invalid_opcode(scp);
 		goto check_cond;
 	}
-	if (has_wlun_rl && !(F_RL_WLUN_OK & flags)) {
-		if (debug)
-			sdev_printk(KERN_INFO, sdp, "scsi_debug: Opcode: "
-				    "0x%x not supported for wlun\n", opcode);
+	if (unlikely(has_wlun_rl && !(F_RL_WLUN_OK & flags))) {
+		if (sdebug_verbose)
+			sdev_printk(KERN_INFO, sdp, "%s: Opcode 0x%x not%s\n",
+				    my_name, opcode, " supported for wlun");
 		mk_sense_invalid_opcode(scp);
 		goto check_cond;
 	}
-	if (scsi_debug_strict) {	/* check cdb against mask */
+	if (unlikely(sdebug_strict)) {	/* check cdb against mask */
 		u8 rem;
 		int j;
 
@@ -5238,52 +5086,40 @@ scsi_debug_queuecommand(struct scsi_cmnd *scp)
 			}
 		}
 	}
-	if (!(F_SKIP_UA & flags) &&
-	    SDEBUG_NUM_UAS != find_first_bit(devip->uas_bm, SDEBUG_NUM_UAS)) {
-		errsts = check_readiness(scp, UAS_ONLY, devip);
+	if (unlikely(!(F_SKIP_UA & flags) &&
+		     find_first_bit(devip->uas_bm,
+				    SDEBUG_NUM_UAS) != SDEBUG_NUM_UAS)) {
+		errsts = make_ua(scp, devip);
 		if (errsts)
 			goto check_cond;
 	}
-	if ((F_M_ACCESS & flags) && devip->stopped) {
+	if (unlikely((F_M_ACCESS & flags) && devip->stopped)) {
 		mk_sense_buffer(scp, NOT_READY, LOGICAL_UNIT_NOT_READY, 0x2);
-		if (debug)
+		if (sdebug_verbose)
 			sdev_printk(KERN_INFO, sdp, "%s reports: Not ready: "
 				    "%s\n", my_name, "initializing command "
 				    "required");
 		errsts = check_condition_result;
 		goto fini;
 	}
-	if (scsi_debug_fake_rw && (F_FAKE_RW & flags))
+	if (sdebug_fake_rw && (F_FAKE_RW & flags))
 		goto fini;
-	if (scsi_debug_every_nth) {
+	if (unlikely(sdebug_every_nth)) {
 		if (check_inject(scp))
 			return 0;	/* ignore command: make trouble */
 	}
-	if (oip->pfp)	/* if this command has a resp_* function, call it */
-		errsts = oip->pfp(scp, devip);
+	if (likely(oip->pfp))
+		errsts = oip->pfp(scp, devip);	/* calls a resp_* function */
 	else if (r_pfp)	/* if leaf function ptr NULL, try the root's */
 		errsts = r_pfp(scp, devip);
 
 fini:
 	return schedule_resp(scp, devip, errsts,
-			     ((F_DELAY_OVERR & flags) ? 0 : scsi_debug_delay));
+			     ((F_DELAY_OVERR & flags) ? 0 : sdebug_jdelay));
 check_cond:
 	return schedule_resp(scp, devip, check_condition_result, 0);
-}
-
-static int
-sdebug_queuecommand_lock_or_not(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
-{
-	if (scsi_debug_host_lock) {
-		unsigned long iflags;
-		int rc;
-
-		spin_lock_irqsave(shost->host_lock, iflags);
-		rc = scsi_debug_queuecommand(cmd);
-		spin_unlock_irqrestore(shost->host_lock, iflags);
-		return rc;
-	} else
-		return scsi_debug_queuecommand(cmd);
+err_out:
+	return schedule_resp(scp, NULL, DID_NO_CONNECT << 16, 0);
 }
 
 static struct scsi_host_template sdebug_driver_template = {
@@ -5296,7 +5132,7 @@ static struct scsi_host_template sdebug_driver_template = {
 	.slave_configure =	scsi_debug_slave_configure,
 	.slave_destroy =	scsi_debug_slave_destroy,
 	.ioctl =		scsi_debug_ioctl,
-	.queuecommand =		sdebug_queuecommand_lock_or_not,
+	.queuecommand =		scsi_debug_queuecommand,
 	.change_queue_depth =	sdebug_change_qdepth,
 	.eh_abort_handler =	scsi_debug_abort,
 	.eh_device_reset_handler = scsi_debug_device_reset,
@@ -5305,7 +5141,7 @@ static struct scsi_host_template sdebug_driver_template = {
 	.eh_host_reset_handler = scsi_debug_host_reset,
 	.can_queue =		SCSI_DEBUG_CANQUEUE,
 	.this_id =		7,
-	.sg_tablesize =		SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize =		SG_MAX_SEGMENTS,
 	.cmd_per_lun =		DEF_CMD_PER_LUN,
 	.max_sectors =		-1U,
 	.use_clustering = 	DISABLE_CLUSTERING,
@@ -5317,15 +5153,14 @@ static struct scsi_host_template sdebug_driver_template = {
 static int sdebug_driver_probe(struct device * dev)
 {
 	int error = 0;
-	int opts;
 	struct sdebug_host_info *sdbg_host;
 	struct Scsi_Host *hpnt;
-	int host_prot;
+	int hprot;
 
 	sdbg_host = to_sdebug_host(dev);
 
-	sdebug_driver_template.can_queue = scsi_debug_max_queue;
-	if (scsi_debug_clustering)
+	sdebug_driver_template.can_queue = sdebug_max_queue;
+	if (sdebug_clustering)
 		sdebug_driver_template.use_clustering = ENABLE_CLUSTERING;
 	hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host));
 	if (NULL == hpnt) {
@@ -5336,69 +5171,60 @@ static int sdebug_driver_probe(struct device * dev)
 
         sdbg_host->shost = hpnt;
 	*((struct sdebug_host_info **)hpnt->hostdata) = sdbg_host;
-	if ((hpnt->this_id >= 0) && (scsi_debug_num_tgts > hpnt->this_id))
-		hpnt->max_id = scsi_debug_num_tgts + 1;
+	if ((hpnt->this_id >= 0) && (sdebug_num_tgts > hpnt->this_id))
+		hpnt->max_id = sdebug_num_tgts + 1;
 	else
-		hpnt->max_id = scsi_debug_num_tgts;
-	/* = scsi_debug_max_luns; */
+		hpnt->max_id = sdebug_num_tgts;
+	/* = sdebug_max_luns; */
 	hpnt->max_lun = SCSI_W_LUN_REPORT_LUNS + 1;
 
-	host_prot = 0;
+	hprot = 0;
 
-	switch (scsi_debug_dif) {
+	switch (sdebug_dif) {
 
 	case SD_DIF_TYPE1_PROTECTION:
-		host_prot = SHOST_DIF_TYPE1_PROTECTION;
-		if (scsi_debug_dix)
-			host_prot |= SHOST_DIX_TYPE1_PROTECTION;
+		hprot = SHOST_DIF_TYPE1_PROTECTION;
+		if (sdebug_dix)
+			hprot |= SHOST_DIX_TYPE1_PROTECTION;
 		break;
 
 	case SD_DIF_TYPE2_PROTECTION:
-		host_prot = SHOST_DIF_TYPE2_PROTECTION;
-		if (scsi_debug_dix)
-			host_prot |= SHOST_DIX_TYPE2_PROTECTION;
+		hprot = SHOST_DIF_TYPE2_PROTECTION;
+		if (sdebug_dix)
+			hprot |= SHOST_DIX_TYPE2_PROTECTION;
 		break;
 
 	case SD_DIF_TYPE3_PROTECTION:
-		host_prot = SHOST_DIF_TYPE3_PROTECTION;
-		if (scsi_debug_dix)
-			host_prot |= SHOST_DIX_TYPE3_PROTECTION;
+		hprot = SHOST_DIF_TYPE3_PROTECTION;
+		if (sdebug_dix)
+			hprot |= SHOST_DIX_TYPE3_PROTECTION;
 		break;
 
 	default:
-		if (scsi_debug_dix)
-			host_prot |= SHOST_DIX_TYPE0_PROTECTION;
+		if (sdebug_dix)
+			hprot |= SHOST_DIX_TYPE0_PROTECTION;
 		break;
 	}
 
-	scsi_host_set_prot(hpnt, host_prot);
+	scsi_host_set_prot(hpnt, hprot);
 
-	pr_info("host protection%s%s%s%s%s%s%s\n",
-	       (host_prot & SHOST_DIF_TYPE1_PROTECTION) ? " DIF1" : "",
-	       (host_prot & SHOST_DIF_TYPE2_PROTECTION) ? " DIF2" : "",
-	       (host_prot & SHOST_DIF_TYPE3_PROTECTION) ? " DIF3" : "",
-	       (host_prot & SHOST_DIX_TYPE0_PROTECTION) ? " DIX0" : "",
-	       (host_prot & SHOST_DIX_TYPE1_PROTECTION) ? " DIX1" : "",
-	       (host_prot & SHOST_DIX_TYPE2_PROTECTION) ? " DIX2" : "",
-	       (host_prot & SHOST_DIX_TYPE3_PROTECTION) ? " DIX3" : "");
+	if (have_dif_prot || sdebug_dix)
+		pr_info("host protection%s%s%s%s%s%s%s\n",
+			(hprot & SHOST_DIF_TYPE1_PROTECTION) ? " DIF1" : "",
+			(hprot & SHOST_DIF_TYPE2_PROTECTION) ? " DIF2" : "",
+			(hprot & SHOST_DIF_TYPE3_PROTECTION) ? " DIF3" : "",
+			(hprot & SHOST_DIX_TYPE0_PROTECTION) ? " DIX0" : "",
+			(hprot & SHOST_DIX_TYPE1_PROTECTION) ? " DIX1" : "",
+			(hprot & SHOST_DIX_TYPE2_PROTECTION) ? " DIX2" : "",
+			(hprot & SHOST_DIX_TYPE3_PROTECTION) ? " DIX3" : "");
 
-	if (scsi_debug_guard == 1)
+	if (sdebug_guard == 1)
 		scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_IP);
 	else
 		scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_CRC);
 
-	opts = scsi_debug_opts;
-	if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
-		sdebug_any_injecting_opt = true;
-	else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
-		sdebug_any_injecting_opt = true;
-
+	sdebug_verbose = !!(SDEBUG_OPT_NOISE & sdebug_opts);
+	sdebug_any_injecting_opt = !!(SDEBUG_OPT_ALL_INJECTING & sdebug_opts);
         error = scsi_add_host(hpnt, &sdbg_host->dev);
         if (error) {
 		pr_err("scsi_add_host failed\n");
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 8106515d1df8..b920c5dabf60 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -14,8 +14,6 @@
 #include <linux/completion.h>
 #include <linux/kernel.h>
 #include <linux/export.h>
-#include <linux/mempool.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
@@ -40,39 +38,6 @@
 #include "scsi_logging.h"
 
 
-#define SG_MEMPOOL_NR		ARRAY_SIZE(scsi_sg_pools)
-#define SG_MEMPOOL_SIZE		2
-
-struct scsi_host_sg_pool {
-	size_t		size;
-	char		*name;
-	struct kmem_cache	*slab;
-	mempool_t	*pool;
-};
-
-#define SP(x) { .size = x, "sgpool-" __stringify(x) }
-#if (SCSI_MAX_SG_SEGMENTS < 32)
-#error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater)
-#endif
-static struct scsi_host_sg_pool scsi_sg_pools[] = {
-	SP(8),
-	SP(16),
-#if (SCSI_MAX_SG_SEGMENTS > 32)
-	SP(32),
-#if (SCSI_MAX_SG_SEGMENTS > 64)
-	SP(64),
-#if (SCSI_MAX_SG_SEGMENTS > 128)
-	SP(128),
-#if (SCSI_MAX_SG_SEGMENTS > 256)
-#error SCSI_MAX_SG_SEGMENTS is too large (256 MAX)
-#endif
-#endif
-#endif
-#endif
-	SP(SCSI_MAX_SG_SEGMENTS)
-};
-#undef SP
-
 struct kmem_cache *scsi_sdb_cache;
 
 /*
@@ -553,66 +518,6 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
 		scsi_run_queue(sdev->request_queue);
 }
 
-static inline unsigned int scsi_sgtable_index(unsigned short nents)
-{
-	unsigned int index;
-
-	BUG_ON(nents > SCSI_MAX_SG_SEGMENTS);
-
-	if (nents <= 8)
-		index = 0;
-	else
-		index = get_count_order(nents) - 3;
-
-	return index;
-}
-
-static void scsi_sg_free(struct scatterlist *sgl, unsigned int nents)
-{
-	struct scsi_host_sg_pool *sgp;
-
-	sgp = scsi_sg_pools + scsi_sgtable_index(nents);
-	mempool_free(sgl, sgp->pool);
-}
-
-static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
-{
-	struct scsi_host_sg_pool *sgp;
-
-	sgp = scsi_sg_pools + scsi_sgtable_index(nents);
-	return mempool_alloc(sgp->pool, gfp_mask);
-}
-
-static void scsi_free_sgtable(struct scsi_data_buffer *sdb, bool mq)
-{
-	if (mq && sdb->table.orig_nents <= SCSI_MAX_SG_SEGMENTS)
-		return;
-	__sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free);
-}
-
-static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, bool mq)
-{
-	struct scatterlist *first_chunk = NULL;
-	int ret;
-
-	BUG_ON(!nents);
-
-	if (mq) {
-		if (nents <= SCSI_MAX_SG_SEGMENTS) {
-			sdb->table.nents = sdb->table.orig_nents = nents;
-			sg_init_table(sdb->table.sgl, nents);
-			return 0;
-		}
-		first_chunk = sdb->table.sgl;
-	}
-
-	ret = __sg_alloc_table(&sdb->table, nents, SCSI_MAX_SG_SEGMENTS,
-			       first_chunk, GFP_ATOMIC, scsi_sg_alloc);
-	if (unlikely(ret))
-		scsi_free_sgtable(sdb, mq);
-	return ret;
-}
-
 static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
 {
 	if (cmd->request->cmd_type == REQ_TYPE_FS) {
@@ -625,12 +530,17 @@ static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
 
 static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)
 {
+	struct scsi_data_buffer *sdb;
+
 	if (cmd->sdb.table.nents)
-		scsi_free_sgtable(&cmd->sdb, true);
-	if (cmd->request->next_rq && cmd->request->next_rq->special)
-		scsi_free_sgtable(cmd->request->next_rq->special, true);
+		sg_free_table_chained(&cmd->sdb.table, true);
+	if (cmd->request->next_rq) {
+		sdb = cmd->request->next_rq->special;
+		if (sdb)
+			sg_free_table_chained(&sdb->table, true);
+	}
 	if (scsi_prot_sg_count(cmd))
-		scsi_free_sgtable(cmd->prot_sdb, true);
+		sg_free_table_chained(&cmd->prot_sdb->table, true);
 }
 
 static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
@@ -669,19 +579,19 @@ static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
 static void scsi_release_buffers(struct scsi_cmnd *cmd)
 {
 	if (cmd->sdb.table.nents)
-		scsi_free_sgtable(&cmd->sdb, false);
+		sg_free_table_chained(&cmd->sdb.table, false);
 
 	memset(&cmd->sdb, 0, sizeof(cmd->sdb));
 
 	if (scsi_prot_sg_count(cmd))
-		scsi_free_sgtable(cmd->prot_sdb, false);
+		sg_free_table_chained(&cmd->prot_sdb->table, false);
 }
 
 static void scsi_release_bidi_buffers(struct scsi_cmnd *cmd)
 {
 	struct scsi_data_buffer *bidi_sdb = cmd->request->next_rq->special;
 
-	scsi_free_sgtable(bidi_sdb, false);
+	sg_free_table_chained(&bidi_sdb->table, false);
 	kmem_cache_free(scsi_sdb_cache, bidi_sdb);
 	cmd->request->next_rq->special = NULL;
 }
@@ -1085,8 +995,8 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb)
 	/*
 	 * If sg table allocation fails, requeue request later.
 	 */
-	if (unlikely(scsi_alloc_sgtable(sdb, req->nr_phys_segments,
-					req->mq_ctx != NULL)))
+	if (unlikely(sg_alloc_table_chained(&sdb->table, req->nr_phys_segments,
+					sdb->table.sgl)))
 		return BLKPREP_DEFER;
 
 	/* 
@@ -1158,7 +1068,8 @@ int scsi_init_io(struct scsi_cmnd *cmd)
 
 		ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio);
 
-		if (scsi_alloc_sgtable(prot_sdb, ivecs, is_mq)) {
+		if (sg_alloc_table_chained(&prot_sdb->table, ivecs,
+				prot_sdb->table.sgl)) {
 			error = BLKPREP_DEFER;
 			goto err_exit;
 		}
@@ -1932,7 +1843,7 @@ static int scsi_mq_prep_fn(struct request *req)
 	if (scsi_host_get_prot(shost)) {
 		cmd->prot_sdb = (void *)sg +
 			min_t(unsigned int,
-			      shost->sg_tablesize, SCSI_MAX_SG_SEGMENTS) *
+			      shost->sg_tablesize, SG_CHUNK_SIZE) *
 			sizeof(struct scatterlist);
 		memset(cmd->prot_sdb, 0, sizeof(struct scsi_data_buffer));
 
@@ -2105,7 +2016,7 @@ static void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q)
 	 * this limit is imposed by hardware restrictions
 	 */
 	blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
-					SCSI_MAX_SG_CHAIN_SEGMENTS));
+					SG_MAX_SEGMENTS));
 
 	if (scsi_host_prot_dma(shost)) {
 		shost->sg_prot_tablesize =
@@ -2187,8 +2098,8 @@ int scsi_mq_setup_tags(struct Scsi_Host *shost)
 	unsigned int cmd_size, sgl_size, tbl_size;
 
 	tbl_size = shost->sg_tablesize;
-	if (tbl_size > SCSI_MAX_SG_SEGMENTS)
-		tbl_size = SCSI_MAX_SG_SEGMENTS;
+	if (tbl_size > SG_CHUNK_SIZE)
+		tbl_size = SG_CHUNK_SIZE;
 	sgl_size = tbl_size * sizeof(struct scatterlist);
 	cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size + sgl_size;
 	if (scsi_host_get_prot(shost))
@@ -2264,8 +2175,6 @@ EXPORT_SYMBOL(scsi_unblock_requests);
 
 int __init scsi_init_queue(void)
 {
-	int i;
-
 	scsi_sdb_cache = kmem_cache_create("scsi_data_buffer",
 					   sizeof(struct scsi_data_buffer),
 					   0, 0, NULL);
@@ -2274,53 +2183,12 @@ int __init scsi_init_queue(void)
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < SG_MEMPOOL_NR; i++) {
-		struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
-		int size = sgp->size * sizeof(struct scatterlist);
-
-		sgp->slab = kmem_cache_create(sgp->name, size, 0,
-				SLAB_HWCACHE_ALIGN, NULL);
-		if (!sgp->slab) {
-			printk(KERN_ERR "SCSI: can't init sg slab %s\n",
-					sgp->name);
-			goto cleanup_sdb;
-		}
-
-		sgp->pool = mempool_create_slab_pool(SG_MEMPOOL_SIZE,
-						     sgp->slab);
-		if (!sgp->pool) {
-			printk(KERN_ERR "SCSI: can't init sg mempool %s\n",
-					sgp->name);
-			goto cleanup_sdb;
-		}
-	}
-
 	return 0;
-
-cleanup_sdb:
-	for (i = 0; i < SG_MEMPOOL_NR; i++) {
-		struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
-		if (sgp->pool)
-			mempool_destroy(sgp->pool);
-		if (sgp->slab)
-			kmem_cache_destroy(sgp->slab);
-	}
-	kmem_cache_destroy(scsi_sdb_cache);
-
-	return -ENOMEM;
 }
 
 void scsi_exit_queue(void)
 {
-	int i;
-
 	kmem_cache_destroy(scsi_sdb_cache);
-
-	for (i = 0; i < SG_MEMPOOL_NR; i++) {
-		struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
-		mempool_destroy(sgp->pool);
-		kmem_cache_destroy(sgp->slab);
-	}
 }
 
 /**
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 27b4d0a6a01d..57a4b9973320 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -116,7 +116,7 @@ extern void scsi_exit_procfs(void);
 extern char scsi_scan_type[];
 extern int scsi_complete_async_scans(void);
 extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int,
-				   unsigned int, u64, int);
+				   unsigned int, u64, enum scsi_scan_mode);
 extern void scsi_forget_host(struct Scsi_Host *);
 extern void scsi_rescan_device(struct device *);
 
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index 251598eb3547..7a74b82e8973 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -251,7 +251,8 @@ static int scsi_add_single_device(uint host, uint channel, uint id, uint lun)
 	if (shost->transportt->user_scan)
 		error = shost->transportt->user_scan(shost, channel, id, lun);
 	else
-		error = scsi_scan_host_selected(shost, channel, id, lun, 1);
+		error = scsi_scan_host_selected(shost, channel, id, lun,
+						SCSI_SCAN_MANUAL);
 	scsi_host_put(shost);
 	return error;
 }
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 97074c91e328..e0a78f53d809 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -96,10 +96,13 @@ MODULE_PARM_DESC(max_luns,
 #define SCSI_SCAN_TYPE_DEFAULT "sync"
 #endif
 
-char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT;
+char scsi_scan_type[7] = SCSI_SCAN_TYPE_DEFAULT;
 
-module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO);
-MODULE_PARM_DESC(scan, "sync, async or none");
+module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type),
+		    S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(scan, "sync, async, manual, or none. "
+		 "Setting to 'manual' disables automatic scanning, but allows "
+		 "for manual device scan via the 'scan' sysfs attribute.");
 
 static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
 
@@ -316,6 +319,7 @@ static void scsi_target_destroy(struct scsi_target *starget)
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
 	unsigned long flags;
 
+	BUG_ON(starget->state == STARGET_DEL);
 	starget->state = STARGET_DEL;
 	transport_destroy_device(dev);
 	spin_lock_irqsave(shost->host_lock, flags);
@@ -1040,7 +1044,8 @@ static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq,
  * @lun:	LUN of target device
  * @bflagsp:	store bflags here if not NULL
  * @sdevp:	probe the LUN corresponding to this scsi_device
- * @rescan:     if nonzero skip some code only needed on first scan
+ * @rescan:     if not equal to SCSI_SCAN_INITIAL skip some code only
+ *              needed on first scan
  * @hostdata:	passed to scsi_alloc_sdev()
  *
  * Description:
@@ -1055,7 +1060,8 @@ static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq,
  **/
 static int scsi_probe_and_add_lun(struct scsi_target *starget,
 				  u64 lun, int *bflagsp,
-				  struct scsi_device **sdevp, int rescan,
+				  struct scsi_device **sdevp,
+				  enum scsi_scan_mode rescan,
 				  void *hostdata)
 {
 	struct scsi_device *sdev;
@@ -1069,7 +1075,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	 */
 	sdev = scsi_device_lookup_by_target(starget, lun);
 	if (sdev) {
-		if (rescan || !scsi_device_created(sdev)) {
+		if (rescan != SCSI_SCAN_INITIAL || !scsi_device_created(sdev)) {
 			SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
 				"scsi scan: device exists on %s\n",
 				dev_name(&sdev->sdev_gendev)));
@@ -1205,7 +1211,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
  *     Modifies sdevscan->lun.
  **/
 static void scsi_sequential_lun_scan(struct scsi_target *starget,
-				     int bflags, int scsi_level, int rescan)
+				     int bflags, int scsi_level,
+				     enum scsi_scan_mode rescan)
 {
 	uint max_dev_lun;
 	u64 sparse_lun, lun;
@@ -1300,7 +1307,7 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget,
  *     1: could not scan with REPORT LUN
  **/
 static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
-				int rescan)
+				enum scsi_scan_mode rescan)
 {
 	char devname[64];
 	unsigned char scsi_cmd[MAX_COMMAND_SIZE];
@@ -1546,7 +1553,7 @@ void scsi_rescan_device(struct device *dev)
 EXPORT_SYMBOL(scsi_rescan_device);
 
 static void __scsi_scan_target(struct device *parent, unsigned int channel,
-		unsigned int id, u64 lun, int rescan)
+		unsigned int id, u64 lun, enum scsi_scan_mode rescan)
 {
 	struct Scsi_Host *shost = dev_to_shost(parent);
 	int bflags = 0;
@@ -1604,7 +1611,10 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel,
  * @channel:	channel to scan
  * @id:		target id to scan
  * @lun:	Specific LUN to scan or SCAN_WILD_CARD
- * @rescan:	passed to LUN scanning routines
+ * @rescan:	passed to LUN scanning routines; SCSI_SCAN_INITIAL for
+ *              no rescan, SCSI_SCAN_RESCAN to rescan existing LUNs,
+ *              and SCSI_SCAN_MANUAL to force scanning even if
+ *              'scan=manual' is set.
  *
  * Description:
  *     Scan the target id on @parent, @channel, and @id. Scan at least LUN 0,
@@ -1614,13 +1624,17 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel,
  *     sequential scan of LUNs on the target id.
  **/
 void scsi_scan_target(struct device *parent, unsigned int channel,
-		      unsigned int id, u64 lun, int rescan)
+		      unsigned int id, u64 lun, enum scsi_scan_mode rescan)
 {
 	struct Scsi_Host *shost = dev_to_shost(parent);
 
 	if (strncmp(scsi_scan_type, "none", 4) == 0)
 		return;
 
+	if (rescan != SCSI_SCAN_MANUAL &&
+	    strncmp(scsi_scan_type, "manual", 6) == 0)
+		return;
+
 	mutex_lock(&shost->scan_mutex);
 	if (!shost->async_scan)
 		scsi_complete_async_scans();
@@ -1634,7 +1648,8 @@ void scsi_scan_target(struct device *parent, unsigned int channel,
 EXPORT_SYMBOL(scsi_scan_target);
 
 static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel,
-			      unsigned int id, u64 lun, int rescan)
+			      unsigned int id, u64 lun,
+			      enum scsi_scan_mode rescan)
 {
 	uint order_id;
 
@@ -1665,7 +1680,8 @@ static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel,
 }
 
 int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
-			    unsigned int id, u64 lun, int rescan)
+			    unsigned int id, u64 lun,
+			    enum scsi_scan_mode rescan)
 {
 	SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO, shost,
 		"%s: <%u:%u:%llu>\n",
@@ -1844,7 +1860,8 @@ void scsi_scan_host(struct Scsi_Host *shost)
 {
 	struct async_scan_data *data;
 
-	if (strncmp(scsi_scan_type, "none", 4) == 0)
+	if (strncmp(scsi_scan_type, "none", 4) == 0 ||
+	    strncmp(scsi_scan_type, "manual", 6) == 0)
 		return;
 	if (scsi_autopm_get_host(shost) < 0)
 		return;
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 92ffd2406f97..07349270535d 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -81,6 +81,7 @@ const char *scsi_host_state_name(enum scsi_host_state state)
 	return name;
 }
 
+#ifdef CONFIG_SCSI_DH
 static const struct {
 	unsigned char	value;
 	char		*name;
@@ -94,7 +95,7 @@ static const struct {
 	{ SCSI_ACCESS_STATE_TRANSITIONING, "transitioning" },
 };
 
-const char *scsi_access_state_name(unsigned char state)
+static const char *scsi_access_state_name(unsigned char state)
 {
 	int i;
 	char *name = NULL;
@@ -107,6 +108,7 @@ const char *scsi_access_state_name(unsigned char state)
 	}
 	return name;
 }
+#endif
 
 static int check_set(unsigned long long *val, char *src)
 {
@@ -143,7 +145,8 @@ static int scsi_scan(struct Scsi_Host *shost, const char *str)
 	if (shost->transportt->user_scan)
 		res = shost->transportt->user_scan(shost, channel, id, lun);
 	else
-		res = scsi_scan_host_selected(shost, channel, id, lun, 1);
+		res = scsi_scan_host_selected(shost, channel, id, lun,
+					      SCSI_SCAN_MANUAL);
 	return res;
 }
 
@@ -226,7 +229,7 @@ show_shost_state(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 /* DEVICE_ATTR(state) clashes with dev_attr_state for sdev */
-struct device_attribute dev_attr_hstate =
+static struct device_attribute dev_attr_hstate =
 	__ATTR(state, S_IRUGO | S_IWUSR, show_shost_state, store_shost_state);
 
 static ssize_t
@@ -401,7 +404,7 @@ static struct attribute *scsi_sysfs_shost_attrs[] = {
 	NULL
 };
 
-struct attribute_group scsi_shost_attr_group = {
+static struct attribute_group scsi_shost_attr_group = {
 	.attrs =	scsi_sysfs_shost_attrs,
 };
 
@@ -1364,18 +1367,18 @@ static void __scsi_remove_target(struct scsi_target *starget)
 void scsi_remove_target(struct device *dev)
 {
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
-	struct scsi_target *starget, *last_target = NULL;
+	struct scsi_target *starget;
 	unsigned long flags;
 
 restart:
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_for_each_entry(starget, &shost->__targets, siblings) {
 		if (starget->state == STARGET_DEL ||
-		    starget == last_target)
+		    starget->state == STARGET_REMOVE)
 			continue;
 		if (starget->dev.parent == dev || &starget->dev == dev) {
 			kref_get(&starget->reap_ref);
-			last_target = starget;
+			starget->state = STARGET_REMOVE;
 			spin_unlock_irqrestore(shost->host_lock, flags);
 			__scsi_remove_target(starget);
 			scsi_target_reap(starget);
diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index 08bb47b53bc3..0ff083bbf5b1 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -17,6 +17,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/trace_seq.h>
+#include <asm/unaligned.h>
 #include <trace/events/scsi.h>
 
 #define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f)
@@ -231,6 +232,158 @@ out:
 }
 
 static const char *
+scsi_trace_maintenance_in(struct trace_seq *p, unsigned char *cdb, int len)
+{
+	const char *ret = trace_seq_buffer_ptr(p), *cmd;
+	u32 alloc_len;
+
+	switch (SERVICE_ACTION16(cdb)) {
+	case MI_REPORT_IDENTIFYING_INFORMATION:
+		cmd = "REPORT_IDENTIFYING_INFORMATION";
+		break;
+	case MI_REPORT_TARGET_PGS:
+		cmd = "REPORT_TARGET_PORT_GROUPS";
+		break;
+	case MI_REPORT_ALIASES:
+		cmd = "REPORT_ALIASES";
+		break;
+	case MI_REPORT_SUPPORTED_OPERATION_CODES:
+		cmd = "REPORT_SUPPORTED_OPERATION_CODES";
+		break;
+	case MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS:
+		cmd = "REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS";
+		break;
+	case MI_REPORT_PRIORITY:
+		cmd = "REPORT_PRIORITY";
+		break;
+	case MI_REPORT_TIMESTAMP:
+		cmd = "REPORT_TIMESTAMP";
+		break;
+	case MI_MANAGEMENT_PROTOCOL_IN:
+		cmd = "MANAGEMENT_PROTOCOL_IN";
+		break;
+	default:
+		trace_seq_puts(p, "UNKNOWN");
+		goto out;
+	}
+
+	alloc_len = get_unaligned_be32(&cdb[6]);
+
+	trace_seq_printf(p, "%s alloc_len=%u", cmd, alloc_len);
+
+out:
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
+static const char *
+scsi_trace_maintenance_out(struct trace_seq *p, unsigned char *cdb, int len)
+{
+	const char *ret = trace_seq_buffer_ptr(p), *cmd;
+	u32 alloc_len;
+
+	switch (SERVICE_ACTION16(cdb)) {
+	case MO_SET_IDENTIFYING_INFORMATION:
+		cmd = "SET_IDENTIFYING_INFORMATION";
+		break;
+	case MO_SET_TARGET_PGS:
+		cmd = "SET_TARGET_PORT_GROUPS";
+		break;
+	case MO_CHANGE_ALIASES:
+		cmd = "CHANGE_ALIASES";
+		break;
+	case MO_SET_PRIORITY:
+		cmd = "SET_PRIORITY";
+		break;
+	case MO_SET_TIMESTAMP:
+		cmd = "SET_TIMESTAMP";
+		break;
+	case MO_MANAGEMENT_PROTOCOL_OUT:
+		cmd = "MANAGEMENT_PROTOCOL_OUT";
+		break;
+	default:
+		trace_seq_puts(p, "UNKNOWN");
+		goto out;
+	}
+
+	alloc_len = get_unaligned_be32(&cdb[6]);
+
+	trace_seq_printf(p, "%s alloc_len=%u", cmd, alloc_len);
+
+out:
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
+static const char *
+scsi_trace_zbc_in(struct trace_seq *p, unsigned char *cdb, int len)
+{
+	const char *ret = trace_seq_buffer_ptr(p), *cmd;
+	u64 zone_id;
+	u32 alloc_len;
+	u8 options;
+
+	switch (SERVICE_ACTION16(cdb)) {
+	case ZI_REPORT_ZONES:
+		cmd = "REPORT_ZONES";
+		break;
+	default:
+		trace_seq_puts(p, "UNKNOWN");
+		goto out;
+	}
+
+	zone_id = get_unaligned_be64(&cdb[2]);
+	alloc_len = get_unaligned_be32(&cdb[10]);
+	options = cdb[14] & 0x3f;
+
+	trace_seq_printf(p, "%s zone=%llu alloc_len=%u options=%u partial=%u",
+			 cmd, (unsigned long long)zone_id, alloc_len,
+			 options, (cdb[14] >> 7) & 1);
+
+out:
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
+static const char *
+scsi_trace_zbc_out(struct trace_seq *p, unsigned char *cdb, int len)
+{
+	const char *ret = trace_seq_buffer_ptr(p), *cmd;
+	u64 zone_id;
+
+	switch (SERVICE_ACTION16(cdb)) {
+	case ZO_CLOSE_ZONE:
+		cmd = "CLOSE_ZONE";
+		break;
+	case ZO_FINISH_ZONE:
+		cmd = "FINISH_ZONE";
+		break;
+	case ZO_OPEN_ZONE:
+		cmd = "OPEN_ZONE";
+		break;
+	case ZO_RESET_WRITE_POINTER:
+		cmd = "RESET_WRITE_POINTER";
+		break;
+	default:
+		trace_seq_puts(p, "UNKNOWN");
+		goto out;
+	}
+
+	zone_id = get_unaligned_be64(&cdb[2]);
+
+	trace_seq_printf(p, "%s zone=%llu all=%u", cmd,
+			 (unsigned long long)zone_id, cdb[14] & 1);
+
+out:
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
+static const char *
 scsi_trace_varlen(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	switch (SERVICE_ACTION32(cdb)) {
@@ -282,6 +435,14 @@ scsi_trace_parse_cdb(struct trace_seq *p, unsigned char *cdb, int len)
 		return scsi_trace_service_action_in(p, cdb, len);
 	case VARIABLE_LENGTH_CMD:
 		return scsi_trace_varlen(p, cdb, len);
+	case MAINTENANCE_IN:
+		return scsi_trace_maintenance_in(p, cdb, len);
+	case MAINTENANCE_OUT:
+		return scsi_trace_maintenance_out(p, cdb, len);
+	case ZBC_IN:
+		return scsi_trace_zbc_in(p, cdb, len);
+	case ZBC_OUT:
+		return scsi_trace_zbc_out(p, cdb, len);
 	default:
 		return scsi_trace_misc(p, cdb, len);
 	}
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 8a8822641b26..0f3a3869524b 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -2027,11 +2027,10 @@ static void fc_vport_dev_release(struct device *dev)
 	kfree(vport);
 }
 
-int scsi_is_fc_vport(const struct device *dev)
+static int scsi_is_fc_vport(const struct device *dev)
 {
 	return dev->release == fc_vport_dev_release;
 }
-EXPORT_SYMBOL(scsi_is_fc_vport);
 
 static int fc_vport_match(struct attribute_container *cont,
 			    struct device *dev)
@@ -2110,7 +2109,8 @@ fc_user_scan_tgt(struct Scsi_Host *shost, uint channel, uint id, u64 lun)
 		if ((channel == rport->channel) &&
 		    (id == rport->scsi_target_id)) {
 			spin_unlock_irqrestore(shost->host_lock, flags);
-			scsi_scan_target(&rport->dev, channel, id, lun, 1);
+			scsi_scan_target(&rport->dev, channel, id, lun,
+					 SCSI_SCAN_MANUAL);
 			return;
 		}
 	}
@@ -3277,7 +3277,8 @@ fc_scsi_scan_rport(struct work_struct *work)
 	    (rport->roles & FC_PORT_ROLE_FCP_TARGET) &&
 	    !(i->f->disable_target_scan)) {
 		scsi_scan_target(&rport->dev, rport->channel,
-			rport->scsi_target_id, SCAN_WILD_CARD, 1);
+				 rport->scsi_target_id, SCAN_WILD_CARD,
+				 SCSI_SCAN_RESCAN);
 	}
 
 	spin_lock_irqsave(shost->host_lock, flags);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 441481623fb9..42bca619f854 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1009,7 +1009,7 @@ static void iscsi_flashnode_sess_release(struct device *dev)
 	kfree(fnode_sess);
 }
 
-struct device_type iscsi_flashnode_sess_dev_type = {
+static struct device_type iscsi_flashnode_sess_dev_type = {
 	.name = "iscsi_flashnode_sess_dev_type",
 	.groups = iscsi_flashnode_sess_attr_groups,
 	.release = iscsi_flashnode_sess_release,
@@ -1195,13 +1195,13 @@ static void iscsi_flashnode_conn_release(struct device *dev)
 	kfree(fnode_conn);
 }
 
-struct device_type iscsi_flashnode_conn_dev_type = {
+static struct device_type iscsi_flashnode_conn_dev_type = {
 	.name = "iscsi_flashnode_conn_dev_type",
 	.groups = iscsi_flashnode_conn_attr_groups,
 	.release = iscsi_flashnode_conn_release,
 };
 
-struct bus_type iscsi_flashnode_bus;
+static struct bus_type iscsi_flashnode_bus;
 
 int iscsi_flashnode_bus_match(struct device *dev,
 				     struct device_driver *drv)
@@ -1212,7 +1212,7 @@ int iscsi_flashnode_bus_match(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(iscsi_flashnode_bus_match);
 
-struct bus_type iscsi_flashnode_bus = {
+static struct bus_type iscsi_flashnode_bus = {
 	.name = "iscsi_flashnode",
 	.match = &iscsi_flashnode_bus_match,
 };
@@ -1324,11 +1324,10 @@ EXPORT_SYMBOL_GPL(iscsi_create_flashnode_conn);
  *  1 on success
  *  0 on failure
  */
-int iscsi_is_flashnode_conn_dev(struct device *dev, void *data)
+static int iscsi_is_flashnode_conn_dev(struct device *dev, void *data)
 {
 	return dev->bus == &iscsi_flashnode_bus;
 }
-EXPORT_SYMBOL_GPL(iscsi_is_flashnode_conn_dev);
 
 static int iscsi_destroy_flashnode_conn(struct iscsi_bus_flash_conn *fnode_conn)
 {
@@ -1783,6 +1782,7 @@ struct iscsi_scan_data {
 	unsigned int channel;
 	unsigned int id;
 	u64 lun;
+	enum scsi_scan_mode rescan;
 };
 
 static int iscsi_user_scan_session(struct device *dev, void *data)
@@ -1819,7 +1819,7 @@ static int iscsi_user_scan_session(struct device *dev, void *data)
 		    (scan_data->id == SCAN_WILD_CARD ||
 		     scan_data->id == id))
 			scsi_scan_target(&session->dev, 0, id,
-					 scan_data->lun, 1);
+					 scan_data->lun, scan_data->rescan);
 	}
 
 user_scan_exit:
@@ -1836,6 +1836,7 @@ static int iscsi_user_scan(struct Scsi_Host *shost, uint channel,
 	scan_data.channel = channel;
 	scan_data.id = id;
 	scan_data.lun = lun;
+	scan_data.rescan = SCSI_SCAN_MANUAL;
 
 	return device_for_each_child(&shost->shost_gendev, &scan_data,
 				     iscsi_user_scan_session);
@@ -1852,6 +1853,7 @@ static void iscsi_scan_session(struct work_struct *work)
 	scan_data.channel = 0;
 	scan_data.id = SCAN_WILD_CARD;
 	scan_data.lun = SCAN_WILD_CARD;
+	scan_data.rescan = SCSI_SCAN_RESCAN;
 
 	iscsi_user_scan_session(&session->dev, &scan_data);
 	atomic_dec(&ihost->nr_scans);
@@ -2067,13 +2069,10 @@ EXPORT_SYMBOL_GPL(iscsi_alloc_session);
 
 int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id)
 {
-	struct Scsi_Host *shost = iscsi_session_to_shost(session);
-	struct iscsi_cls_host *ihost;
 	unsigned long flags;
 	int id = 0;
 	int err;
 
-	ihost = shost->shost_data;
 	session->sid = atomic_add_return(1, &iscsi_session_nr);
 
 	if (target_id == ISCSI_MAX_TARGET) {
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index b6f958193dad..3f0ff072184b 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -1614,7 +1614,8 @@ int sas_rphy_add(struct sas_rphy *rphy)
 		else
 			lun = 0;
 
-		scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, lun, 0);
+		scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, lun,
+				 SCSI_SCAN_INITIAL);
 	}
 
 	return 0;
@@ -1739,8 +1740,8 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 
 		if ((channel == SCAN_WILD_CARD || channel == 0) &&
 		    (id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) {
-			scsi_scan_target(&rphy->dev, 0,
-					 rphy->scsi_target_id, lun, 1);
+			scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id,
+					 lun, SCSI_SCAN_MANUAL);
 		}
 	}
 	mutex_unlock(&sas_host->lock);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 5a5457ac9cdb..f52b74cf8d1e 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1275,18 +1275,19 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 	struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
 	struct scsi_device *sdp = sdkp->device;
 	struct Scsi_Host *host = sdp->host;
+	sector_t capacity = logical_to_sectors(sdp, sdkp->capacity);
 	int diskinfo[4];
 
 	/* default to most commonly used values */
-        diskinfo[0] = 0x40;	/* 1 << 6 */
-       	diskinfo[1] = 0x20;	/* 1 << 5 */
-       	diskinfo[2] = sdkp->capacity >> 11;
-	
+	diskinfo[0] = 0x40;	/* 1 << 6 */
+	diskinfo[1] = 0x20;	/* 1 << 5 */
+	diskinfo[2] = capacity >> 11;
+
 	/* override with calculated, extended default, or driver values */
 	if (host->hostt->bios_param)
-		host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
+		host->hostt->bios_param(sdp, bdev, capacity, diskinfo);
 	else
-		scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
+		scsicam_bios_param(bdev, capacity, diskinfo);
 
 	geo->heads = diskinfo[0];
 	geo->sectors = diskinfo[1];
@@ -2337,14 +2338,6 @@ got_data:
 	if (sdkp->capacity > 0xffffffff)
 		sdp->use_16_for_rw = 1;
 
-	/* Rescale capacity to 512-byte units */
-	if (sector_size == 4096)
-		sdkp->capacity <<= 3;
-	else if (sector_size == 2048)
-		sdkp->capacity <<= 2;
-	else if (sector_size == 1024)
-		sdkp->capacity <<= 1;
-
 	blk_queue_physical_block_size(sdp->request_queue,
 				      sdkp->physical_block_size);
 	sdkp->device->sector_size = sector_size;
@@ -2795,28 +2788,6 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
 		sdkp->ws10 = 1;
 }
 
-static int sd_try_extended_inquiry(struct scsi_device *sdp)
-{
-	/* Attempt VPD inquiry if the device blacklist explicitly calls
-	 * for it.
-	 */
-	if (sdp->try_vpd_pages)
-		return 1;
-	/*
-	 * Although VPD inquiries can go to SCSI-2 type devices,
-	 * some USB ones crash on receiving them, and the pages
-	 * we currently ask for are for SPC-3 and beyond
-	 */
-	if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages)
-		return 1;
-	return 0;
-}
-
-static inline u32 logical_to_sectors(struct scsi_device *sdev, u32 blocks)
-{
-	return blocks << (ilog2(sdev->sector_size) - 9);
-}
-
 /**
  *	sd_revalidate_disk - called the first time a new disk is seen,
  *	performs disk spin up, read_capacity, etc.
@@ -2856,7 +2827,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	if (sdkp->media_present) {
 		sd_read_capacity(sdkp, buffer);
 
-		if (sd_try_extended_inquiry(sdp)) {
+		if (scsi_device_supports_vpd(sdp)) {
 			sd_read_block_provisioning(sdkp);
 			sd_read_block_limits(sdkp);
 			sd_read_block_characteristics(sdkp);
@@ -2891,7 +2862,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	if (sdkp->opt_xfer_blocks &&
 	    sdkp->opt_xfer_blocks <= dev_max &&
 	    sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS &&
-	    sdkp->opt_xfer_blocks * sdp->sector_size >= PAGE_CACHE_SIZE)
+	    sdkp->opt_xfer_blocks * sdp->sector_size >= PAGE_SIZE)
 		rw_max = q->limits.io_opt =
 			sdkp->opt_xfer_blocks * sdp->sector_size;
 	else
@@ -2900,7 +2871,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	/* Combine with controller limits */
 	q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q));
 
-	set_capacity(disk, sdkp->capacity);
+	set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity));
 	sd_config_write_same(sdkp);
 	kfree(buffer);
 
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 5f2a84aff29f..654630bb7d0e 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -65,7 +65,7 @@ struct scsi_disk {
 	struct device	dev;
 	struct gendisk	*disk;
 	atomic_t	openers;
-	sector_t	capacity;	/* size in 512-byte sectors */
+	sector_t	capacity;	/* size in logical blocks */
 	u32		max_xfer_blocks;
 	u32		opt_xfer_blocks;
 	u32		max_ws_blocks;
@@ -146,6 +146,11 @@ static inline int scsi_medium_access_command(struct scsi_cmnd *scmd)
 	return 0;
 }
 
+static inline sector_t logical_to_sectors(struct scsi_device *sdev, sector_t blocks)
+{
+	return blocks << (ilog2(sdev->sector_size) - 9);
+}
+
 /*
  * A DIF-capable target device can be formatted with different
  * protection schemes.  Currently 0 through 3 are defined:
diff --git a/drivers/scsi/sense_codes.h b/drivers/scsi/sense_codes.h
new file mode 100644
index 000000000000..e4e1dccd1f2f
--- /dev/null
+++ b/drivers/scsi/sense_codes.h
@@ -0,0 +1,826 @@
+/*
+ * The canonical list of T10 Additional Sense Codes is available at:
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
+ */
+
+SENSE_CODE(0x0000, "No additional sense information")
+SENSE_CODE(0x0001, "Filemark detected")
+SENSE_CODE(0x0002, "End-of-partition/medium detected")
+SENSE_CODE(0x0003, "Setmark detected")
+SENSE_CODE(0x0004, "Beginning-of-partition/medium detected")
+SENSE_CODE(0x0005, "End-of-data detected")
+SENSE_CODE(0x0006, "I/O process terminated")
+SENSE_CODE(0x0007, "Programmable early warning detected")
+SENSE_CODE(0x0011, "Audio play operation in progress")
+SENSE_CODE(0x0012, "Audio play operation paused")
+SENSE_CODE(0x0013, "Audio play operation successfully completed")
+SENSE_CODE(0x0014, "Audio play operation stopped due to error")
+SENSE_CODE(0x0015, "No current audio status to return")
+SENSE_CODE(0x0016, "Operation in progress")
+SENSE_CODE(0x0017, "Cleaning requested")
+SENSE_CODE(0x0018, "Erase operation in progress")
+SENSE_CODE(0x0019, "Locate operation in progress")
+SENSE_CODE(0x001A, "Rewind operation in progress")
+SENSE_CODE(0x001B, "Set capacity operation in progress")
+SENSE_CODE(0x001C, "Verify operation in progress")
+SENSE_CODE(0x001D, "ATA pass through information available")
+SENSE_CODE(0x001E, "Conflicting SA creation request")
+SENSE_CODE(0x001F, "Logical unit transitioning to another power condition")
+SENSE_CODE(0x0020, "Extended copy information available")
+SENSE_CODE(0x0021, "Atomic command aborted due to ACA")
+
+SENSE_CODE(0x0100, "No index/sector signal")
+
+SENSE_CODE(0x0200, "No seek complete")
+
+SENSE_CODE(0x0300, "Peripheral device write fault")
+SENSE_CODE(0x0301, "No write current")
+SENSE_CODE(0x0302, "Excessive write errors")
+
+SENSE_CODE(0x0400, "Logical unit not ready, cause not reportable")
+SENSE_CODE(0x0401, "Logical unit is in process of becoming ready")
+SENSE_CODE(0x0402, "Logical unit not ready, initializing command required")
+SENSE_CODE(0x0403, "Logical unit not ready, manual intervention required")
+SENSE_CODE(0x0404, "Logical unit not ready, format in progress")
+SENSE_CODE(0x0405, "Logical unit not ready, rebuild in progress")
+SENSE_CODE(0x0406, "Logical unit not ready, recalculation in progress")
+SENSE_CODE(0x0407, "Logical unit not ready, operation in progress")
+SENSE_CODE(0x0408, "Logical unit not ready, long write in progress")
+SENSE_CODE(0x0409, "Logical unit not ready, self-test in progress")
+SENSE_CODE(0x040A, "Logical unit not accessible, asymmetric access state transition")
+SENSE_CODE(0x040B, "Logical unit not accessible, target port in standby state")
+SENSE_CODE(0x040C, "Logical unit not accessible, target port in unavailable state")
+SENSE_CODE(0x040D, "Logical unit not ready, structure check required")
+SENSE_CODE(0x040E, "Logical unit not ready, security session in progress")
+SENSE_CODE(0x0410, "Logical unit not ready, auxiliary memory not accessible")
+SENSE_CODE(0x0411, "Logical unit not ready, notify (enable spinup) required")
+SENSE_CODE(0x0412, "Logical unit not ready, offline")
+SENSE_CODE(0x0413, "Logical unit not ready, SA creation in progress")
+SENSE_CODE(0x0414, "Logical unit not ready, space allocation in progress")
+SENSE_CODE(0x0415, "Logical unit not ready, robotics disabled")
+SENSE_CODE(0x0416, "Logical unit not ready, configuration required")
+SENSE_CODE(0x0417, "Logical unit not ready, calibration required")
+SENSE_CODE(0x0418, "Logical unit not ready, a door is open")
+SENSE_CODE(0x0419, "Logical unit not ready, operating in sequential mode")
+SENSE_CODE(0x041A, "Logical unit not ready, start stop unit command in progress")
+SENSE_CODE(0x041B, "Logical unit not ready, sanitize in progress")
+SENSE_CODE(0x041C, "Logical unit not ready, additional power use not yet granted")
+SENSE_CODE(0x041D, "Logical unit not ready, configuration in progress")
+SENSE_CODE(0x041E, "Logical unit not ready, microcode activation required")
+SENSE_CODE(0x041F, "Logical unit not ready, microcode download required")
+SENSE_CODE(0x0420, "Logical unit not ready, logical unit reset required")
+SENSE_CODE(0x0421, "Logical unit not ready, hard reset required")
+SENSE_CODE(0x0422, "Logical unit not ready, power cycle required")
+
+SENSE_CODE(0x0500, "Logical unit does not respond to selection")
+
+SENSE_CODE(0x0600, "No reference position found")
+
+SENSE_CODE(0x0700, "Multiple peripheral devices selected")
+
+SENSE_CODE(0x0800, "Logical unit communication failure")
+SENSE_CODE(0x0801, "Logical unit communication time-out")
+SENSE_CODE(0x0802, "Logical unit communication parity error")
+SENSE_CODE(0x0803, "Logical unit communication CRC error (Ultra-DMA/32)")
+SENSE_CODE(0x0804, "Unreachable copy target")
+
+SENSE_CODE(0x0900, "Track following error")
+SENSE_CODE(0x0901, "Tracking servo failure")
+SENSE_CODE(0x0902, "Focus servo failure")
+SENSE_CODE(0x0903, "Spindle servo failure")
+SENSE_CODE(0x0904, "Head select fault")
+SENSE_CODE(0x0905, "Vibration induced tracking error")
+
+SENSE_CODE(0x0A00, "Error log overflow")
+
+SENSE_CODE(0x0B00, "Warning")
+SENSE_CODE(0x0B01, "Warning - specified temperature exceeded")
+SENSE_CODE(0x0B02, "Warning - enclosure degraded")
+SENSE_CODE(0x0B03, "Warning - background self-test failed")
+SENSE_CODE(0x0B04, "Warning - background pre-scan detected medium error")
+SENSE_CODE(0x0B05, "Warning - background medium scan detected medium error")
+SENSE_CODE(0x0B06, "Warning - non-volatile cache now volatile")
+SENSE_CODE(0x0B07, "Warning - degraded power to non-volatile cache")
+SENSE_CODE(0x0B08, "Warning - power loss expected")
+SENSE_CODE(0x0B09, "Warning - device statistics notification active")
+
+SENSE_CODE(0x0C00, "Write error")
+SENSE_CODE(0x0C01, "Write error - recovered with auto reallocation")
+SENSE_CODE(0x0C02, "Write error - auto reallocation failed")
+SENSE_CODE(0x0C03, "Write error - recommend reassignment")
+SENSE_CODE(0x0C04, "Compression check miscompare error")
+SENSE_CODE(0x0C05, "Data expansion occurred during compression")
+SENSE_CODE(0x0C06, "Block not compressible")
+SENSE_CODE(0x0C07, "Write error - recovery needed")
+SENSE_CODE(0x0C08, "Write error - recovery failed")
+SENSE_CODE(0x0C09, "Write error - loss of streaming")
+SENSE_CODE(0x0C0A, "Write error - padding blocks added")
+SENSE_CODE(0x0C0B, "Auxiliary memory write error")
+SENSE_CODE(0x0C0C, "Write error - unexpected unsolicited data")
+SENSE_CODE(0x0C0D, "Write error - not enough unsolicited data")
+SENSE_CODE(0x0C0E, "Multiple write errors")
+SENSE_CODE(0x0C0F, "Defects in error window")
+SENSE_CODE(0x0C10, "Incomplete multiple atomic write operations")
+
+SENSE_CODE(0x0D00, "Error detected by third party temporary initiator")
+SENSE_CODE(0x0D01, "Third party device failure")
+SENSE_CODE(0x0D02, "Copy target device not reachable")
+SENSE_CODE(0x0D03, "Incorrect copy target device type")
+SENSE_CODE(0x0D04, "Copy target device data underrun")
+SENSE_CODE(0x0D05, "Copy target device data overrun")
+
+SENSE_CODE(0x0E00, "Invalid information unit")
+SENSE_CODE(0x0E01, "Information unit too short")
+SENSE_CODE(0x0E02, "Information unit too long")
+SENSE_CODE(0x0E03, "Invalid field in command information unit")
+
+SENSE_CODE(0x1000, "Id CRC or ECC error")
+SENSE_CODE(0x1001, "Logical block guard check failed")
+SENSE_CODE(0x1002, "Logical block application tag check failed")
+SENSE_CODE(0x1003, "Logical block reference tag check failed")
+SENSE_CODE(0x1004, "Logical block protection error on recover buffered data")
+SENSE_CODE(0x1005, "Logical block protection method error")
+
+SENSE_CODE(0x1100, "Unrecovered read error")
+SENSE_CODE(0x1101, "Read retries exhausted")
+SENSE_CODE(0x1102, "Error too long to correct")
+SENSE_CODE(0x1103, "Multiple read errors")
+SENSE_CODE(0x1104, "Unrecovered read error - auto reallocate failed")
+SENSE_CODE(0x1105, "L-EC uncorrectable error")
+SENSE_CODE(0x1106, "CIRC unrecovered error")
+SENSE_CODE(0x1107, "Data re-synchronization error")
+SENSE_CODE(0x1108, "Incomplete block read")
+SENSE_CODE(0x1109, "No gap found")
+SENSE_CODE(0x110A, "Miscorrected error")
+SENSE_CODE(0x110B, "Unrecovered read error - recommend reassignment")
+SENSE_CODE(0x110C, "Unrecovered read error - recommend rewrite the data")
+SENSE_CODE(0x110D, "De-compression CRC error")
+SENSE_CODE(0x110E, "Cannot decompress using declared algorithm")
+SENSE_CODE(0x110F, "Error reading UPC/EAN number")
+SENSE_CODE(0x1110, "Error reading ISRC number")
+SENSE_CODE(0x1111, "Read error - loss of streaming")
+SENSE_CODE(0x1112, "Auxiliary memory read error")
+SENSE_CODE(0x1113, "Read error - failed retransmission request")
+SENSE_CODE(0x1114, "Read error - lba marked bad by application client")
+SENSE_CODE(0x1115, "Write after sanitize required")
+
+SENSE_CODE(0x1200, "Address mark not found for id field")
+
+SENSE_CODE(0x1300, "Address mark not found for data field")
+
+SENSE_CODE(0x1400, "Recorded entity not found")
+SENSE_CODE(0x1401, "Record not found")
+SENSE_CODE(0x1402, "Filemark or setmark not found")
+SENSE_CODE(0x1403, "End-of-data not found")
+SENSE_CODE(0x1404, "Block sequence error")
+SENSE_CODE(0x1405, "Record not found - recommend reassignment")
+SENSE_CODE(0x1406, "Record not found - data auto-reallocated")
+SENSE_CODE(0x1407, "Locate operation failure")
+
+SENSE_CODE(0x1500, "Random positioning error")
+SENSE_CODE(0x1501, "Mechanical positioning error")
+SENSE_CODE(0x1502, "Positioning error detected by read of medium")
+
+SENSE_CODE(0x1600, "Data synchronization mark error")
+SENSE_CODE(0x1601, "Data sync error - data rewritten")
+SENSE_CODE(0x1602, "Data sync error - recommend rewrite")
+SENSE_CODE(0x1603, "Data sync error - data auto-reallocated")
+SENSE_CODE(0x1604, "Data sync error - recommend reassignment")
+
+SENSE_CODE(0x1700, "Recovered data with no error correction applied")
+SENSE_CODE(0x1701, "Recovered data with retries")
+SENSE_CODE(0x1702, "Recovered data with positive head offset")
+SENSE_CODE(0x1703, "Recovered data with negative head offset")
+SENSE_CODE(0x1704, "Recovered data with retries and/or circ applied")
+SENSE_CODE(0x1705, "Recovered data using previous sector id")
+SENSE_CODE(0x1706, "Recovered data without ECC - data auto-reallocated")
+SENSE_CODE(0x1707, "Recovered data without ECC - recommend reassignment")
+SENSE_CODE(0x1708, "Recovered data without ECC - recommend rewrite")
+SENSE_CODE(0x1709, "Recovered data without ECC - data rewritten")
+
+SENSE_CODE(0x1800, "Recovered data with error correction applied")
+SENSE_CODE(0x1801, "Recovered data with error corr. & retries applied")
+SENSE_CODE(0x1802, "Recovered data - data auto-reallocated")
+SENSE_CODE(0x1803, "Recovered data with CIRC")
+SENSE_CODE(0x1804, "Recovered data with L-EC")
+SENSE_CODE(0x1805, "Recovered data - recommend reassignment")
+SENSE_CODE(0x1806, "Recovered data - recommend rewrite")
+SENSE_CODE(0x1807, "Recovered data with ECC - data rewritten")
+SENSE_CODE(0x1808, "Recovered data with linking")
+
+SENSE_CODE(0x1900, "Defect list error")
+SENSE_CODE(0x1901, "Defect list not available")
+SENSE_CODE(0x1902, "Defect list error in primary list")
+SENSE_CODE(0x1903, "Defect list error in grown list")
+
+SENSE_CODE(0x1A00, "Parameter list length error")
+
+SENSE_CODE(0x1B00, "Synchronous data transfer error")
+
+SENSE_CODE(0x1C00, "Defect list not found")
+SENSE_CODE(0x1C01, "Primary defect list not found")
+SENSE_CODE(0x1C02, "Grown defect list not found")
+
+SENSE_CODE(0x1D00, "Miscompare during verify operation")
+SENSE_CODE(0x1D01, "Miscompare verify of unmapped LBA")
+
+SENSE_CODE(0x1E00, "Recovered id with ECC correction")
+
+SENSE_CODE(0x1F00, "Partial defect list transfer")
+
+SENSE_CODE(0x2000, "Invalid command operation code")
+SENSE_CODE(0x2001, "Access denied - initiator pending-enrolled")
+SENSE_CODE(0x2002, "Access denied - no access rights")
+SENSE_CODE(0x2003, "Access denied - invalid mgmt id key")
+SENSE_CODE(0x2004, "Illegal command while in write capable state")
+SENSE_CODE(0x2005, "Obsolete")
+SENSE_CODE(0x2006, "Illegal command while in explicit address mode")
+SENSE_CODE(0x2007, "Illegal command while in implicit address mode")
+SENSE_CODE(0x2008, "Access denied - enrollment conflict")
+SENSE_CODE(0x2009, "Access denied - invalid LU identifier")
+SENSE_CODE(0x200A, "Access denied - invalid proxy token")
+SENSE_CODE(0x200B, "Access denied - ACL LUN conflict")
+SENSE_CODE(0x200C, "Illegal command when not in append-only mode")
+
+SENSE_CODE(0x2100, "Logical block address out of range")
+SENSE_CODE(0x2101, "Invalid element address")
+SENSE_CODE(0x2102, "Invalid address for write")
+SENSE_CODE(0x2103, "Invalid write crossing layer jump")
+SENSE_CODE(0x2104, "Unaligned write command")
+SENSE_CODE(0x2105, "Write boundary violation")
+SENSE_CODE(0x2106, "Attempt to read invalid data")
+SENSE_CODE(0x2107, "Read boundary violation")
+
+SENSE_CODE(0x2200, "Illegal function (use 20 00, 24 00, or 26 00)")
+
+SENSE_CODE(0x2300, "Invalid token operation, cause not reportable")
+SENSE_CODE(0x2301, "Invalid token operation, unsupported token type")
+SENSE_CODE(0x2302, "Invalid token operation, remote token usage not supported")
+SENSE_CODE(0x2303, "Invalid token operation, remote rod token creation not supported")
+SENSE_CODE(0x2304, "Invalid token operation, token unknown")
+SENSE_CODE(0x2305, "Invalid token operation, token corrupt")
+SENSE_CODE(0x2306, "Invalid token operation, token revoked")
+SENSE_CODE(0x2307, "Invalid token operation, token expired")
+SENSE_CODE(0x2308, "Invalid token operation, token cancelled")
+SENSE_CODE(0x2309, "Invalid token operation, token deleted")
+SENSE_CODE(0x230A, "Invalid token operation, invalid token length")
+
+SENSE_CODE(0x2400, "Invalid field in cdb")
+SENSE_CODE(0x2401, "CDB decryption error")
+SENSE_CODE(0x2402, "Obsolete")
+SENSE_CODE(0x2403, "Obsolete")
+SENSE_CODE(0x2404, "Security audit value frozen")
+SENSE_CODE(0x2405, "Security working key frozen")
+SENSE_CODE(0x2406, "Nonce not unique")
+SENSE_CODE(0x2407, "Nonce timestamp out of range")
+SENSE_CODE(0x2408, "Invalid XCDB")
+
+SENSE_CODE(0x2500, "Logical unit not supported")
+
+SENSE_CODE(0x2600, "Invalid field in parameter list")
+SENSE_CODE(0x2601, "Parameter not supported")
+SENSE_CODE(0x2602, "Parameter value invalid")
+SENSE_CODE(0x2603, "Threshold parameters not supported")
+SENSE_CODE(0x2604, "Invalid release of persistent reservation")
+SENSE_CODE(0x2605, "Data decryption error")
+SENSE_CODE(0x2606, "Too many target descriptors")
+SENSE_CODE(0x2607, "Unsupported target descriptor type code")
+SENSE_CODE(0x2608, "Too many segment descriptors")
+SENSE_CODE(0x2609, "Unsupported segment descriptor type code")
+SENSE_CODE(0x260A, "Unexpected inexact segment")
+SENSE_CODE(0x260B, "Inline data length exceeded")
+SENSE_CODE(0x260C, "Invalid operation for copy source or destination")
+SENSE_CODE(0x260D, "Copy segment granularity violation")
+SENSE_CODE(0x260E, "Invalid parameter while port is enabled")
+SENSE_CODE(0x260F, "Invalid data-out buffer integrity check value")
+SENSE_CODE(0x2610, "Data decryption key fail limit reached")
+SENSE_CODE(0x2611, "Incomplete key-associated data set")
+SENSE_CODE(0x2612, "Vendor specific key reference not found")
+
+SENSE_CODE(0x2700, "Write protected")
+SENSE_CODE(0x2701, "Hardware write protected")
+SENSE_CODE(0x2702, "Logical unit software write protected")
+SENSE_CODE(0x2703, "Associated write protect")
+SENSE_CODE(0x2704, "Persistent write protect")
+SENSE_CODE(0x2705, "Permanent write protect")
+SENSE_CODE(0x2706, "Conditional write protect")
+SENSE_CODE(0x2707, "Space allocation failed write protect")
+SENSE_CODE(0x2708, "Zone is read only")
+
+SENSE_CODE(0x2800, "Not ready to ready change, medium may have changed")
+SENSE_CODE(0x2801, "Import or export element accessed")
+SENSE_CODE(0x2802, "Format-layer may have changed")
+SENSE_CODE(0x2803, "Import/export element accessed, medium changed")
+
+SENSE_CODE(0x2900, "Power on, reset, or bus device reset occurred")
+SENSE_CODE(0x2901, "Power on occurred")
+SENSE_CODE(0x2902, "Scsi bus reset occurred")
+SENSE_CODE(0x2903, "Bus device reset function occurred")
+SENSE_CODE(0x2904, "Device internal reset")
+SENSE_CODE(0x2905, "Transceiver mode changed to single-ended")
+SENSE_CODE(0x2906, "Transceiver mode changed to lvd")
+SENSE_CODE(0x2907, "I_T nexus loss occurred")
+
+SENSE_CODE(0x2A00, "Parameters changed")
+SENSE_CODE(0x2A01, "Mode parameters changed")
+SENSE_CODE(0x2A02, "Log parameters changed")
+SENSE_CODE(0x2A03, "Reservations preempted")
+SENSE_CODE(0x2A04, "Reservations released")
+SENSE_CODE(0x2A05, "Registrations preempted")
+SENSE_CODE(0x2A06, "Asymmetric access state changed")
+SENSE_CODE(0x2A07, "Implicit asymmetric access state transition failed")
+SENSE_CODE(0x2A08, "Priority changed")
+SENSE_CODE(0x2A09, "Capacity data has changed")
+SENSE_CODE(0x2A0A, "Error history I_T nexus cleared")
+SENSE_CODE(0x2A0B, "Error history snapshot released")
+SENSE_CODE(0x2A0C, "Error recovery attributes have changed")
+SENSE_CODE(0x2A0D, "Data encryption capabilities changed")
+SENSE_CODE(0x2A10, "Timestamp changed")
+SENSE_CODE(0x2A11, "Data encryption parameters changed by another i_t nexus")
+SENSE_CODE(0x2A12, "Data encryption parameters changed by vendor specific event")
+SENSE_CODE(0x2A13, "Data encryption key instance counter has changed")
+SENSE_CODE(0x2A14, "SA creation capabilities data has changed")
+SENSE_CODE(0x2A15, "Medium removal prevention preempted")
+
+SENSE_CODE(0x2B00, "Copy cannot execute since host cannot disconnect")
+
+SENSE_CODE(0x2C00, "Command sequence error")
+SENSE_CODE(0x2C01, "Too many windows specified")
+SENSE_CODE(0x2C02, "Invalid combination of windows specified")
+SENSE_CODE(0x2C03, "Current program area is not empty")
+SENSE_CODE(0x2C04, "Current program area is empty")
+SENSE_CODE(0x2C05, "Illegal power condition request")
+SENSE_CODE(0x2C06, "Persistent prevent conflict")
+SENSE_CODE(0x2C07, "Previous busy status")
+SENSE_CODE(0x2C08, "Previous task set full status")
+SENSE_CODE(0x2C09, "Previous reservation conflict status")
+SENSE_CODE(0x2C0A, "Partition or collection contains user objects")
+SENSE_CODE(0x2C0B, "Not reserved")
+SENSE_CODE(0x2C0C, "Orwrite generation does not match")
+SENSE_CODE(0x2C0D, "Reset write pointer not allowed")
+SENSE_CODE(0x2C0E, "Zone is offline")
+
+SENSE_CODE(0x2D00, "Overwrite error on update in place")
+
+SENSE_CODE(0x2E00, "Insufficient time for operation")
+SENSE_CODE(0x2E01, "Command timeout before processing")
+SENSE_CODE(0x2E02, "Command timeout during processing")
+SENSE_CODE(0x2E03, "Command timeout during processing due to error recovery")
+
+SENSE_CODE(0x2F00, "Commands cleared by another initiator")
+SENSE_CODE(0x2F01, "Commands cleared by power loss notification")
+SENSE_CODE(0x2F02, "Commands cleared by device server")
+SENSE_CODE(0x2F03, "Some commands cleared by queuing layer event")
+
+SENSE_CODE(0x3000, "Incompatible medium installed")
+SENSE_CODE(0x3001, "Cannot read medium - unknown format")
+SENSE_CODE(0x3002, "Cannot read medium - incompatible format")
+SENSE_CODE(0x3003, "Cleaning cartridge installed")
+SENSE_CODE(0x3004, "Cannot write medium - unknown format")
+SENSE_CODE(0x3005, "Cannot write medium - incompatible format")
+SENSE_CODE(0x3006, "Cannot format medium - incompatible medium")
+SENSE_CODE(0x3007, "Cleaning failure")
+SENSE_CODE(0x3008, "Cannot write - application code mismatch")
+SENSE_CODE(0x3009, "Current session not fixated for append")
+SENSE_CODE(0x300A, "Cleaning request rejected")
+SENSE_CODE(0x300C, "WORM medium - overwrite attempted")
+SENSE_CODE(0x300D, "WORM medium - integrity check")
+SENSE_CODE(0x3010, "Medium not formatted")
+SENSE_CODE(0x3011, "Incompatible volume type")
+SENSE_CODE(0x3012, "Incompatible volume qualifier")
+SENSE_CODE(0x3013, "Cleaning volume expired")
+
+SENSE_CODE(0x3100, "Medium format corrupted")
+SENSE_CODE(0x3101, "Format command failed")
+SENSE_CODE(0x3102, "Zoned formatting failed due to spare linking")
+SENSE_CODE(0x3103, "Sanitize command failed")
+
+SENSE_CODE(0x3200, "No defect spare location available")
+SENSE_CODE(0x3201, "Defect list update failure")
+
+SENSE_CODE(0x3300, "Tape length error")
+
+SENSE_CODE(0x3400, "Enclosure failure")
+
+SENSE_CODE(0x3500, "Enclosure services failure")
+SENSE_CODE(0x3501, "Unsupported enclosure function")
+SENSE_CODE(0x3502, "Enclosure services unavailable")
+SENSE_CODE(0x3503, "Enclosure services transfer failure")
+SENSE_CODE(0x3504, "Enclosure services transfer refused")
+SENSE_CODE(0x3505, "Enclosure services checksum error")
+
+SENSE_CODE(0x3600, "Ribbon, ink, or toner failure")
+
+SENSE_CODE(0x3700, "Rounded parameter")
+
+SENSE_CODE(0x3800, "Event status notification")
+SENSE_CODE(0x3802, "Esn - power management class event")
+SENSE_CODE(0x3804, "Esn - media class event")
+SENSE_CODE(0x3806, "Esn - device busy class event")
+SENSE_CODE(0x3807, "Thin Provisioning soft threshold reached")
+
+SENSE_CODE(0x3900, "Saving parameters not supported")
+
+SENSE_CODE(0x3A00, "Medium not present")
+SENSE_CODE(0x3A01, "Medium not present - tray closed")
+SENSE_CODE(0x3A02, "Medium not present - tray open")
+SENSE_CODE(0x3A03, "Medium not present - loadable")
+SENSE_CODE(0x3A04, "Medium not present - medium auxiliary memory accessible")
+
+SENSE_CODE(0x3B00, "Sequential positioning error")
+SENSE_CODE(0x3B01, "Tape position error at beginning-of-medium")
+SENSE_CODE(0x3B02, "Tape position error at end-of-medium")
+SENSE_CODE(0x3B03, "Tape or electronic vertical forms unit not ready")
+SENSE_CODE(0x3B04, "Slew failure")
+SENSE_CODE(0x3B05, "Paper jam")
+SENSE_CODE(0x3B06, "Failed to sense top-of-form")
+SENSE_CODE(0x3B07, "Failed to sense bottom-of-form")
+SENSE_CODE(0x3B08, "Reposition error")
+SENSE_CODE(0x3B09, "Read past end of medium")
+SENSE_CODE(0x3B0A, "Read past beginning of medium")
+SENSE_CODE(0x3B0B, "Position past end of medium")
+SENSE_CODE(0x3B0C, "Position past beginning of medium")
+SENSE_CODE(0x3B0D, "Medium destination element full")
+SENSE_CODE(0x3B0E, "Medium source element empty")
+SENSE_CODE(0x3B0F, "End of medium reached")
+SENSE_CODE(0x3B11, "Medium magazine not accessible")
+SENSE_CODE(0x3B12, "Medium magazine removed")
+SENSE_CODE(0x3B13, "Medium magazine inserted")
+SENSE_CODE(0x3B14, "Medium magazine locked")
+SENSE_CODE(0x3B15, "Medium magazine unlocked")
+SENSE_CODE(0x3B16, "Mechanical positioning or changer error")
+SENSE_CODE(0x3B17, "Read past end of user object")
+SENSE_CODE(0x3B18, "Element disabled")
+SENSE_CODE(0x3B19, "Element enabled")
+SENSE_CODE(0x3B1A, "Data transfer device removed")
+SENSE_CODE(0x3B1B, "Data transfer device inserted")
+SENSE_CODE(0x3B1C, "Too many logical objects on partition to support operation")
+
+SENSE_CODE(0x3D00, "Invalid bits in identify message")
+
+SENSE_CODE(0x3E00, "Logical unit has not self-configured yet")
+SENSE_CODE(0x3E01, "Logical unit failure")
+SENSE_CODE(0x3E02, "Timeout on logical unit")
+SENSE_CODE(0x3E03, "Logical unit failed self-test")
+SENSE_CODE(0x3E04, "Logical unit unable to update self-test log")
+
+SENSE_CODE(0x3F00, "Target operating conditions have changed")
+SENSE_CODE(0x3F01, "Microcode has been changed")
+SENSE_CODE(0x3F02, "Changed operating definition")
+SENSE_CODE(0x3F03, "Inquiry data has changed")
+SENSE_CODE(0x3F04, "Component device attached")
+SENSE_CODE(0x3F05, "Device identifier changed")
+SENSE_CODE(0x3F06, "Redundancy group created or modified")
+SENSE_CODE(0x3F07, "Redundancy group deleted")
+SENSE_CODE(0x3F08, "Spare created or modified")
+SENSE_CODE(0x3F09, "Spare deleted")
+SENSE_CODE(0x3F0A, "Volume set created or modified")
+SENSE_CODE(0x3F0B, "Volume set deleted")
+SENSE_CODE(0x3F0C, "Volume set deassigned")
+SENSE_CODE(0x3F0D, "Volume set reassigned")
+SENSE_CODE(0x3F0E, "Reported luns data has changed")
+SENSE_CODE(0x3F0F, "Echo buffer overwritten")
+SENSE_CODE(0x3F10, "Medium loadable")
+SENSE_CODE(0x3F11, "Medium auxiliary memory accessible")
+SENSE_CODE(0x3F12, "iSCSI IP address added")
+SENSE_CODE(0x3F13, "iSCSI IP address removed")
+SENSE_CODE(0x3F14, "iSCSI IP address changed")
+SENSE_CODE(0x3F15, "Inspect referrals sense descriptors")
+SENSE_CODE(0x3F16, "Microcode has been changed without reset")
+/*
+ *	SENSE_CODE(0x40NN, "Ram failure")
+ *	SENSE_CODE(0x40NN, "Diagnostic failure on component nn")
+ *	SENSE_CODE(0x41NN, "Data path failure")
+ *	SENSE_CODE(0x42NN, "Power-on or self-test failure")
+ */
+SENSE_CODE(0x4300, "Message error")
+
+SENSE_CODE(0x4400, "Internal target failure")
+SENSE_CODE(0x4401, "Persistent reservation information lost")
+SENSE_CODE(0x4471, "ATA device failed set features")
+
+SENSE_CODE(0x4500, "Select or reselect failure")
+
+SENSE_CODE(0x4600, "Unsuccessful soft reset")
+
+SENSE_CODE(0x4700, "Scsi parity error")
+SENSE_CODE(0x4701, "Data phase CRC error detected")
+SENSE_CODE(0x4702, "Scsi parity error detected during st data phase")
+SENSE_CODE(0x4703, "Information unit iuCRC error detected")
+SENSE_CODE(0x4704, "Asynchronous information protection error detected")
+SENSE_CODE(0x4705, "Protocol service CRC error")
+SENSE_CODE(0x4706, "Phy test function in progress")
+SENSE_CODE(0x477f, "Some commands cleared by iSCSI Protocol event")
+
+SENSE_CODE(0x4800, "Initiator detected error message received")
+
+SENSE_CODE(0x4900, "Invalid message error")
+
+SENSE_CODE(0x4A00, "Command phase error")
+
+SENSE_CODE(0x4B00, "Data phase error")
+SENSE_CODE(0x4B01, "Invalid target port transfer tag received")
+SENSE_CODE(0x4B02, "Too much write data")
+SENSE_CODE(0x4B03, "Ack/nak timeout")
+SENSE_CODE(0x4B04, "Nak received")
+SENSE_CODE(0x4B05, "Data offset error")
+SENSE_CODE(0x4B06, "Initiator response timeout")
+SENSE_CODE(0x4B07, "Connection lost")
+SENSE_CODE(0x4B08, "Data-in buffer overflow - data buffer size")
+SENSE_CODE(0x4B09, "Data-in buffer overflow - data buffer descriptor area")
+SENSE_CODE(0x4B0A, "Data-in buffer error")
+SENSE_CODE(0x4B0B, "Data-out buffer overflow - data buffer size")
+SENSE_CODE(0x4B0C, "Data-out buffer overflow - data buffer descriptor area")
+SENSE_CODE(0x4B0D, "Data-out buffer error")
+SENSE_CODE(0x4B0E, "PCIe fabric error")
+SENSE_CODE(0x4B0F, "PCIe completion timeout")
+SENSE_CODE(0x4B10, "PCIe completer abort")
+SENSE_CODE(0x4B11, "PCIe poisoned tlp received")
+SENSE_CODE(0x4B12, "PCIe eCRC check failed")
+SENSE_CODE(0x4B13, "PCIe unsupported request")
+SENSE_CODE(0x4B14, "PCIe acs violation")
+SENSE_CODE(0x4B15, "PCIe tlp prefix blocked")
+
+SENSE_CODE(0x4C00, "Logical unit failed self-configuration")
+/*
+ *	SENSE_CODE(0x4DNN, "Tagged overlapped commands (nn = queue tag)")
+ */
+SENSE_CODE(0x4E00, "Overlapped commands attempted")
+
+SENSE_CODE(0x5000, "Write append error")
+SENSE_CODE(0x5001, "Write append position error")
+SENSE_CODE(0x5002, "Position error related to timing")
+
+SENSE_CODE(0x5100, "Erase failure")
+SENSE_CODE(0x5101, "Erase failure - incomplete erase operation detected")
+
+SENSE_CODE(0x5200, "Cartridge fault")
+
+SENSE_CODE(0x5300, "Media load or eject failed")
+SENSE_CODE(0x5301, "Unload tape failure")
+SENSE_CODE(0x5302, "Medium removal prevented")
+SENSE_CODE(0x5303, "Medium removal prevented by data transfer element")
+SENSE_CODE(0x5304, "Medium thread or unthread failure")
+SENSE_CODE(0x5305, "Volume identifier invalid")
+SENSE_CODE(0x5306, "Volume identifier missing")
+SENSE_CODE(0x5307, "Duplicate volume identifier")
+SENSE_CODE(0x5308, "Element status unknown")
+SENSE_CODE(0x5309, "Data transfer device error - load failed")
+SENSE_CODE(0x530a, "Data transfer device error - unload failed")
+SENSE_CODE(0x530b, "Data transfer device error - unload missing")
+SENSE_CODE(0x530c, "Data transfer device error - eject failed")
+SENSE_CODE(0x530d, "Data transfer device error - library communication failed")
+
+SENSE_CODE(0x5400, "Scsi to host system interface failure")
+
+SENSE_CODE(0x5500, "System resource failure")
+SENSE_CODE(0x5501, "System buffer full")
+SENSE_CODE(0x5502, "Insufficient reservation resources")
+SENSE_CODE(0x5503, "Insufficient resources")
+SENSE_CODE(0x5504, "Insufficient registration resources")
+SENSE_CODE(0x5505, "Insufficient access control resources")
+SENSE_CODE(0x5506, "Auxiliary memory out of space")
+SENSE_CODE(0x5507, "Quota error")
+SENSE_CODE(0x5508, "Maximum number of supplemental decryption keys exceeded")
+SENSE_CODE(0x5509, "Medium auxiliary memory not accessible")
+SENSE_CODE(0x550A, "Data currently unavailable")
+SENSE_CODE(0x550B, "Insufficient power for operation")
+SENSE_CODE(0x550C, "Insufficient resources to create rod")
+SENSE_CODE(0x550D, "Insufficient resources to create rod token")
+SENSE_CODE(0x550E, "Insufficient zone resources")
+
+SENSE_CODE(0x5700, "Unable to recover table-of-contents")
+
+SENSE_CODE(0x5800, "Generation does not exist")
+
+SENSE_CODE(0x5900, "Updated block read")
+
+SENSE_CODE(0x5A00, "Operator request or state change input")
+SENSE_CODE(0x5A01, "Operator medium removal request")
+SENSE_CODE(0x5A02, "Operator selected write protect")
+SENSE_CODE(0x5A03, "Operator selected write permit")
+
+SENSE_CODE(0x5B00, "Log exception")
+SENSE_CODE(0x5B01, "Threshold condition met")
+SENSE_CODE(0x5B02, "Log counter at maximum")
+SENSE_CODE(0x5B03, "Log list codes exhausted")
+
+SENSE_CODE(0x5C00, "Rpl status change")
+SENSE_CODE(0x5C01, "Spindles synchronized")
+SENSE_CODE(0x5C02, "Spindles not synchronized")
+
+SENSE_CODE(0x5D00, "Failure prediction threshold exceeded")
+SENSE_CODE(0x5D01, "Media failure prediction threshold exceeded")
+SENSE_CODE(0x5D02, "Logical unit failure prediction threshold exceeded")
+SENSE_CODE(0x5D03, "Spare area exhaustion prediction threshold exceeded")
+SENSE_CODE(0x5D10, "Hardware impending failure general hard drive failure")
+SENSE_CODE(0x5D11, "Hardware impending failure drive error rate too high")
+SENSE_CODE(0x5D12, "Hardware impending failure data error rate too high")
+SENSE_CODE(0x5D13, "Hardware impending failure seek error rate too high")
+SENSE_CODE(0x5D14, "Hardware impending failure too many block reassigns")
+SENSE_CODE(0x5D15, "Hardware impending failure access times too high")
+SENSE_CODE(0x5D16, "Hardware impending failure start unit times too high")
+SENSE_CODE(0x5D17, "Hardware impending failure channel parametrics")
+SENSE_CODE(0x5D18, "Hardware impending failure controller detected")
+SENSE_CODE(0x5D19, "Hardware impending failure throughput performance")
+SENSE_CODE(0x5D1A, "Hardware impending failure seek time performance")
+SENSE_CODE(0x5D1B, "Hardware impending failure spin-up retry count")
+SENSE_CODE(0x5D1C, "Hardware impending failure drive calibration retry count")
+SENSE_CODE(0x5D20, "Controller impending failure general hard drive failure")
+SENSE_CODE(0x5D21, "Controller impending failure drive error rate too high")
+SENSE_CODE(0x5D22, "Controller impending failure data error rate too high")
+SENSE_CODE(0x5D23, "Controller impending failure seek error rate too high")
+SENSE_CODE(0x5D24, "Controller impending failure too many block reassigns")
+SENSE_CODE(0x5D25, "Controller impending failure access times too high")
+SENSE_CODE(0x5D26, "Controller impending failure start unit times too high")
+SENSE_CODE(0x5D27, "Controller impending failure channel parametrics")
+SENSE_CODE(0x5D28, "Controller impending failure controller detected")
+SENSE_CODE(0x5D29, "Controller impending failure throughput performance")
+SENSE_CODE(0x5D2A, "Controller impending failure seek time performance")
+SENSE_CODE(0x5D2B, "Controller impending failure spin-up retry count")
+SENSE_CODE(0x5D2C, "Controller impending failure drive calibration retry count")
+SENSE_CODE(0x5D30, "Data channel impending failure general hard drive failure")
+SENSE_CODE(0x5D31, "Data channel impending failure drive error rate too high")
+SENSE_CODE(0x5D32, "Data channel impending failure data error rate too high")
+SENSE_CODE(0x5D33, "Data channel impending failure seek error rate too high")
+SENSE_CODE(0x5D34, "Data channel impending failure too many block reassigns")
+SENSE_CODE(0x5D35, "Data channel impending failure access times too high")
+SENSE_CODE(0x5D36, "Data channel impending failure start unit times too high")
+SENSE_CODE(0x5D37, "Data channel impending failure channel parametrics")
+SENSE_CODE(0x5D38, "Data channel impending failure controller detected")
+SENSE_CODE(0x5D39, "Data channel impending failure throughput performance")
+SENSE_CODE(0x5D3A, "Data channel impending failure seek time performance")
+SENSE_CODE(0x5D3B, "Data channel impending failure spin-up retry count")
+SENSE_CODE(0x5D3C, "Data channel impending failure drive calibration retry count")
+SENSE_CODE(0x5D40, "Servo impending failure general hard drive failure")
+SENSE_CODE(0x5D41, "Servo impending failure drive error rate too high")
+SENSE_CODE(0x5D42, "Servo impending failure data error rate too high")
+SENSE_CODE(0x5D43, "Servo impending failure seek error rate too high")
+SENSE_CODE(0x5D44, "Servo impending failure too many block reassigns")
+SENSE_CODE(0x5D45, "Servo impending failure access times too high")
+SENSE_CODE(0x5D46, "Servo impending failure start unit times too high")
+SENSE_CODE(0x5D47, "Servo impending failure channel parametrics")
+SENSE_CODE(0x5D48, "Servo impending failure controller detected")
+SENSE_CODE(0x5D49, "Servo impending failure throughput performance")
+SENSE_CODE(0x5D4A, "Servo impending failure seek time performance")
+SENSE_CODE(0x5D4B, "Servo impending failure spin-up retry count")
+SENSE_CODE(0x5D4C, "Servo impending failure drive calibration retry count")
+SENSE_CODE(0x5D50, "Spindle impending failure general hard drive failure")
+SENSE_CODE(0x5D51, "Spindle impending failure drive error rate too high")
+SENSE_CODE(0x5D52, "Spindle impending failure data error rate too high")
+SENSE_CODE(0x5D53, "Spindle impending failure seek error rate too high")
+SENSE_CODE(0x5D54, "Spindle impending failure too many block reassigns")
+SENSE_CODE(0x5D55, "Spindle impending failure access times too high")
+SENSE_CODE(0x5D56, "Spindle impending failure start unit times too high")
+SENSE_CODE(0x5D57, "Spindle impending failure channel parametrics")
+SENSE_CODE(0x5D58, "Spindle impending failure controller detected")
+SENSE_CODE(0x5D59, "Spindle impending failure throughput performance")
+SENSE_CODE(0x5D5A, "Spindle impending failure seek time performance")
+SENSE_CODE(0x5D5B, "Spindle impending failure spin-up retry count")
+SENSE_CODE(0x5D5C, "Spindle impending failure drive calibration retry count")
+SENSE_CODE(0x5D60, "Firmware impending failure general hard drive failure")
+SENSE_CODE(0x5D61, "Firmware impending failure drive error rate too high")
+SENSE_CODE(0x5D62, "Firmware impending failure data error rate too high")
+SENSE_CODE(0x5D63, "Firmware impending failure seek error rate too high")
+SENSE_CODE(0x5D64, "Firmware impending failure too many block reassigns")
+SENSE_CODE(0x5D65, "Firmware impending failure access times too high")
+SENSE_CODE(0x5D66, "Firmware impending failure start unit times too high")
+SENSE_CODE(0x5D67, "Firmware impending failure channel parametrics")
+SENSE_CODE(0x5D68, "Firmware impending failure controller detected")
+SENSE_CODE(0x5D69, "Firmware impending failure throughput performance")
+SENSE_CODE(0x5D6A, "Firmware impending failure seek time performance")
+SENSE_CODE(0x5D6B, "Firmware impending failure spin-up retry count")
+SENSE_CODE(0x5D6C, "Firmware impending failure drive calibration retry count")
+SENSE_CODE(0x5DFF, "Failure prediction threshold exceeded (false)")
+
+SENSE_CODE(0x5E00, "Low power condition on")
+SENSE_CODE(0x5E01, "Idle condition activated by timer")
+SENSE_CODE(0x5E02, "Standby condition activated by timer")
+SENSE_CODE(0x5E03, "Idle condition activated by command")
+SENSE_CODE(0x5E04, "Standby condition activated by command")
+SENSE_CODE(0x5E05, "Idle_b condition activated by timer")
+SENSE_CODE(0x5E06, "Idle_b condition activated by command")
+SENSE_CODE(0x5E07, "Idle_c condition activated by timer")
+SENSE_CODE(0x5E08, "Idle_c condition activated by command")
+SENSE_CODE(0x5E09, "Standby_y condition activated by timer")
+SENSE_CODE(0x5E0A, "Standby_y condition activated by command")
+SENSE_CODE(0x5E41, "Power state change to active")
+SENSE_CODE(0x5E42, "Power state change to idle")
+SENSE_CODE(0x5E43, "Power state change to standby")
+SENSE_CODE(0x5E45, "Power state change to sleep")
+SENSE_CODE(0x5E47, "Power state change to device control")
+
+SENSE_CODE(0x6000, "Lamp failure")
+
+SENSE_CODE(0x6100, "Video acquisition error")
+SENSE_CODE(0x6101, "Unable to acquire video")
+SENSE_CODE(0x6102, "Out of focus")
+
+SENSE_CODE(0x6200, "Scan head positioning error")
+
+SENSE_CODE(0x6300, "End of user area encountered on this track")
+SENSE_CODE(0x6301, "Packet does not fit in available space")
+
+SENSE_CODE(0x6400, "Illegal mode for this track")
+SENSE_CODE(0x6401, "Invalid packet size")
+
+SENSE_CODE(0x6500, "Voltage fault")
+
+SENSE_CODE(0x6600, "Automatic document feeder cover up")
+SENSE_CODE(0x6601, "Automatic document feeder lift up")
+SENSE_CODE(0x6602, "Document jam in automatic document feeder")
+SENSE_CODE(0x6603, "Document miss feed automatic in document feeder")
+
+SENSE_CODE(0x6700, "Configuration failure")
+SENSE_CODE(0x6701, "Configuration of incapable logical units failed")
+SENSE_CODE(0x6702, "Add logical unit failed")
+SENSE_CODE(0x6703, "Modification of logical unit failed")
+SENSE_CODE(0x6704, "Exchange of logical unit failed")
+SENSE_CODE(0x6705, "Remove of logical unit failed")
+SENSE_CODE(0x6706, "Attachment of logical unit failed")
+SENSE_CODE(0x6707, "Creation of logical unit failed")
+SENSE_CODE(0x6708, "Assign failure occurred")
+SENSE_CODE(0x6709, "Multiply assigned logical unit")
+SENSE_CODE(0x670A, "Set target port groups command failed")
+SENSE_CODE(0x670B, "ATA device feature not enabled")
+
+SENSE_CODE(0x6800, "Logical unit not configured")
+SENSE_CODE(0x6801, "Subsidiary logical unit not configured")
+
+SENSE_CODE(0x6900, "Data loss on logical unit")
+SENSE_CODE(0x6901, "Multiple logical unit failures")
+SENSE_CODE(0x6902, "Parity/data mismatch")
+
+SENSE_CODE(0x6A00, "Informational, refer to log")
+
+SENSE_CODE(0x6B00, "State change has occurred")
+SENSE_CODE(0x6B01, "Redundancy level got better")
+SENSE_CODE(0x6B02, "Redundancy level got worse")
+
+SENSE_CODE(0x6C00, "Rebuild failure occurred")
+
+SENSE_CODE(0x6D00, "Recalculate failure occurred")
+
+SENSE_CODE(0x6E00, "Command to logical unit failed")
+
+SENSE_CODE(0x6F00, "Copy protection key exchange failure - authentication failure")
+SENSE_CODE(0x6F01, "Copy protection key exchange failure - key not present")
+SENSE_CODE(0x6F02, "Copy protection key exchange failure - key not established")
+SENSE_CODE(0x6F03, "Read of scrambled sector without authentication")
+SENSE_CODE(0x6F04, "Media region code is mismatched to logical unit region")
+SENSE_CODE(0x6F05, "Drive region must be permanent/region reset count error")
+SENSE_CODE(0x6F06, "Insufficient block count for binding nonce recording")
+SENSE_CODE(0x6F07, "Conflict in binding nonce recording")
+/*
+ *	SENSE_CODE(0x70NN, "Decompression exception short algorithm id of nn")
+ */
+SENSE_CODE(0x7100, "Decompression exception long algorithm id")
+
+SENSE_CODE(0x7200, "Session fixation error")
+SENSE_CODE(0x7201, "Session fixation error writing lead-in")
+SENSE_CODE(0x7202, "Session fixation error writing lead-out")
+SENSE_CODE(0x7203, "Session fixation error - incomplete track in session")
+SENSE_CODE(0x7204, "Empty or partially written reserved track")
+SENSE_CODE(0x7205, "No more track reservations allowed")
+SENSE_CODE(0x7206, "RMZ extension is not allowed")
+SENSE_CODE(0x7207, "No more test zone extensions are allowed")
+
+SENSE_CODE(0x7300, "Cd control error")
+SENSE_CODE(0x7301, "Power calibration area almost full")
+SENSE_CODE(0x7302, "Power calibration area is full")
+SENSE_CODE(0x7303, "Power calibration area error")
+SENSE_CODE(0x7304, "Program memory area update failure")
+SENSE_CODE(0x7305, "Program memory area is full")
+SENSE_CODE(0x7306, "RMA/PMA is almost full")
+SENSE_CODE(0x7310, "Current power calibration area almost full")
+SENSE_CODE(0x7311, "Current power calibration area is full")
+SENSE_CODE(0x7317, "RDZ is full")
+
+SENSE_CODE(0x7400, "Security error")
+SENSE_CODE(0x7401, "Unable to decrypt data")
+SENSE_CODE(0x7402, "Unencrypted data encountered while decrypting")
+SENSE_CODE(0x7403, "Incorrect data encryption key")
+SENSE_CODE(0x7404, "Cryptographic integrity validation failed")
+SENSE_CODE(0x7405, "Error decrypting data")
+SENSE_CODE(0x7406, "Unknown signature verification key")
+SENSE_CODE(0x7407, "Encryption parameters not useable")
+SENSE_CODE(0x7408, "Digital signature validation failure")
+SENSE_CODE(0x7409, "Encryption mode mismatch on read")
+SENSE_CODE(0x740A, "Encrypted block not raw read enabled")
+SENSE_CODE(0x740B, "Incorrect Encryption parameters")
+SENSE_CODE(0x740C, "Unable to decrypt parameter list")
+SENSE_CODE(0x740D, "Encryption algorithm disabled")
+SENSE_CODE(0x7410, "SA creation parameter value invalid")
+SENSE_CODE(0x7411, "SA creation parameter value rejected")
+SENSE_CODE(0x7412, "Invalid SA usage")
+SENSE_CODE(0x7421, "Data Encryption configuration prevented")
+SENSE_CODE(0x7430, "SA creation parameter not supported")
+SENSE_CODE(0x7440, "Authentication failed")
+SENSE_CODE(0x7461, "External data encryption key manager access error")
+SENSE_CODE(0x7462, "External data encryption key manager error")
+SENSE_CODE(0x7463, "External data encryption key not found")
+SENSE_CODE(0x7464, "External data encryption request not authorized")
+SENSE_CODE(0x746E, "External data encryption control timeout")
+SENSE_CODE(0x746F, "External data encryption control error")
+SENSE_CODE(0x7471, "Logical unit access not authorized")
+SENSE_CODE(0x7479, "Security conflict in translated device")
diff --git a/drivers/scsi/snic/snic.h b/drivers/scsi/snic/snic.h
index d7f5ba6ba84c..8ed778d4dbb9 100644
--- a/drivers/scsi/snic/snic.h
+++ b/drivers/scsi/snic/snic.h
@@ -95,6 +95,8 @@
 #define SNIC_DEV_RST_NOTSUP		BIT(25)
 #define SNIC_SCSI_CLEANUP		BIT(26)
 #define SNIC_HOST_RESET_ISSUED		BIT(27)
+#define SNIC_HOST_RESET_CMD_TERM	\
+	(SNIC_DEV_RST_NOTSUP | SNIC_SCSI_CLEANUP | SNIC_HOST_RESET_ISSUED)
 
 #define SNIC_ABTS_TIMEOUT		30000		/* msec */
 #define SNIC_LUN_RESET_TIMEOUT		30000		/* msec */
@@ -216,9 +218,10 @@ enum snic_msix_intr_index {
 	SNIC_MSIX_INTR_MAX,
 };
 
+#define SNIC_INTRHDLR_NAMSZ	(2 * IFNAMSIZ)
 struct snic_msix_entry {
 	int requested;
-	char devname[IFNAMSIZ];
+	char devname[SNIC_INTRHDLR_NAMSZ];
 	irqreturn_t (*isr)(int, void *);
 	void *devid;
 };
diff --git a/drivers/scsi/snic/snic_ctl.c b/drivers/scsi/snic/snic_ctl.c
index ab0e06b0b4ff..449b03f3bbd3 100644
--- a/drivers/scsi/snic/snic_ctl.c
+++ b/drivers/scsi/snic/snic_ctl.c
@@ -39,17 +39,15 @@ snic_handle_link(struct work_struct *work)
 {
 	struct snic *snic = container_of(work, struct snic, link_work);
 
-	if (snic->config.xpt_type != SNIC_DAS) {
-		SNIC_HOST_INFO(snic->shost, "Link Event Received.\n");
-		SNIC_ASSERT_NOT_IMPL(1);
-
+	if (snic->config.xpt_type == SNIC_DAS)
 		return;
-	}
 
 	snic->link_status = svnic_dev_link_status(snic->vdev);
 	snic->link_down_cnt = svnic_dev_link_down_cnt(snic->vdev);
 	SNIC_HOST_INFO(snic->shost, "Link Event: Link %s.\n",
 		       ((snic->link_status) ? "Up" : "Down"));
+
+	SNIC_ASSERT_NOT_IMPL(1);
 }
 
 
diff --git a/drivers/scsi/snic/snic_debugfs.c b/drivers/scsi/snic/snic_debugfs.c
index 1686f0196251..d30280326bde 100644
--- a/drivers/scsi/snic/snic_debugfs.c
+++ b/drivers/scsi/snic/snic_debugfs.c
@@ -264,12 +264,14 @@ snic_stats_show(struct seq_file *sfp, void *data)
 		   "Aborts Fail                 : %lld\n"
 		   "Aborts Driver Timeout       : %lld\n"
 		   "Abort FW Timeout            : %lld\n"
-		   "Abort IO NOT Found          : %lld\n",
+		   "Abort IO NOT Found          : %lld\n"
+		   "Abort Queuing Failed        : %lld\n",
 		   (u64) atomic64_read(&stats->abts.num),
 		   (u64) atomic64_read(&stats->abts.fail),
 		   (u64) atomic64_read(&stats->abts.drv_tmo),
 		   (u64) atomic64_read(&stats->abts.fw_tmo),
-		   (u64) atomic64_read(&stats->abts.io_not_found));
+		   (u64) atomic64_read(&stats->abts.io_not_found),
+		   (u64) atomic64_read(&stats->abts.q_fail));
 
 	/* Dump Reset Stats */
 	seq_printf(sfp,
@@ -316,7 +318,9 @@ snic_stats_show(struct seq_file *sfp, void *data)
 	seq_printf(sfp,
 		   "Last ISR Time               : %llu (%8lu.%8lu)\n"
 		   "Last Ack Time               : %llu (%8lu.%8lu)\n"
-		   "ISRs                        : %llu\n"
+		   "Ack ISRs                    : %llu\n"
+		   "IO Cmpl ISRs                : %llu\n"
+		   "Err Notify ISRs             : %llu\n"
 		   "Max CQ Entries              : %lld\n"
 		   "Data Count Mismatch         : %lld\n"
 		   "IOs w/ Timeout Status       : %lld\n"
@@ -324,12 +328,17 @@ snic_stats_show(struct seq_file *sfp, void *data)
 		   "IOs w/ SGL Invalid Stat     : %lld\n"
 		   "WQ Desc Alloc Fail          : %lld\n"
 		   "Queue Full                  : %lld\n"
+		   "Queue Ramp Up               : %lld\n"
+		   "Queue Ramp Down             : %lld\n"
+		   "Queue Last Queue Depth      : %lld\n"
 		   "Target Not Ready            : %lld\n",
 		   (u64) stats->misc.last_isr_time,
 		   last_isr_tms.tv_sec, last_isr_tms.tv_nsec,
 		   (u64)stats->misc.last_ack_time,
 		   last_ack_tms.tv_sec, last_ack_tms.tv_nsec,
-		   (u64) atomic64_read(&stats->misc.isr_cnt),
+		   (u64) atomic64_read(&stats->misc.ack_isr_cnt),
+		   (u64) atomic64_read(&stats->misc.cmpl_isr_cnt),
+		   (u64) atomic64_read(&stats->misc.errnotify_isr_cnt),
 		   (u64) atomic64_read(&stats->misc.max_cq_ents),
 		   (u64) atomic64_read(&stats->misc.data_cnt_mismat),
 		   (u64) atomic64_read(&stats->misc.io_tmo),
@@ -337,6 +346,9 @@ snic_stats_show(struct seq_file *sfp, void *data)
 		   (u64) atomic64_read(&stats->misc.sgl_inval),
 		   (u64) atomic64_read(&stats->misc.wq_alloc_fail),
 		   (u64) atomic64_read(&stats->misc.qfull),
+		   (u64) atomic64_read(&stats->misc.qsz_rampup),
+		   (u64) atomic64_read(&stats->misc.qsz_rampdown),
+		   (u64) atomic64_read(&stats->misc.last_qsz),
 		   (u64) atomic64_read(&stats->misc.tgt_not_rdy));
 
 	return 0;
diff --git a/drivers/scsi/snic/snic_disc.c b/drivers/scsi/snic/snic_disc.c
index 5f6321759ad9..b0fefd67cac3 100644
--- a/drivers/scsi/snic/snic_disc.c
+++ b/drivers/scsi/snic/snic_disc.c
@@ -171,7 +171,7 @@ snic_scsi_scan_tgt(struct work_struct *work)
 			 tgt->channel,
 			 tgt->scsi_tgt_id,
 			 SCAN_WILD_CARD,
-			 1);
+			 SCSI_SCAN_RESCAN);
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	tgt->flags &= ~SNIC_TGT_SCAN_PENDING;
@@ -480,10 +480,21 @@ int
 snic_disc_start(struct snic *snic)
 {
 	struct snic_disc *disc = &snic->disc;
+	unsigned long flags;
 	int ret = 0;
 
 	SNIC_SCSI_DBG(snic->shost, "Discovery Start.\n");
 
+	spin_lock_irqsave(&snic->snic_lock, flags);
+	if (snic->in_remove) {
+		spin_unlock_irqrestore(&snic->snic_lock, flags);
+		SNIC_ERR("snic driver removal in progress ...\n");
+		ret = 0;
+
+		return ret;
+	}
+	spin_unlock_irqrestore(&snic->snic_lock, flags);
+
 	mutex_lock(&disc->mutex);
 	if (disc->state == SNIC_DISC_PENDING) {
 		disc->req_cnt++;
@@ -533,6 +544,8 @@ snic_tgt_del_all(struct snic *snic)
 	struct list_head *cur, *nxt;
 	unsigned long flags;
 
+	scsi_flush_work(snic->shost);
+
 	mutex_lock(&snic->disc.mutex);
 	spin_lock_irqsave(snic->shost->host_lock, flags);
 
@@ -545,7 +558,7 @@ snic_tgt_del_all(struct snic *snic)
 		tgt = NULL;
 	}
 	spin_unlock_irqrestore(snic->shost->host_lock, flags);
-
-	scsi_flush_work(snic->shost);
 	mutex_unlock(&snic->disc.mutex);
+
+	flush_workqueue(snic_glob->event_q);
 } /* end of snic_tgt_del_all */
diff --git a/drivers/scsi/snic/snic_fwint.h b/drivers/scsi/snic/snic_fwint.h
index 2cfaf2dc915f..c5f9e1917a8e 100644
--- a/drivers/scsi/snic/snic_fwint.h
+++ b/drivers/scsi/snic/snic_fwint.h
@@ -414,7 +414,7 @@ enum snic_ev_type {
 /* Payload 88 bytes = 128 - 24 - 16 */
 #define SNIC_HOST_REQ_PAYLOAD	((int)(SNIC_HOST_REQ_LEN -		\
 					sizeof(struct snic_io_hdr) -	\
-					(2 * sizeof(u64))))
+					(2 * sizeof(u64)) - sizeof(ulong)))
 
 /*
  * snic_host_req: host -> firmware request
@@ -448,6 +448,8 @@ struct snic_host_req {
 		/* hba reset */
 		struct snic_hba_reset		reset;
 	} u;
+
+	ulong req_pa;
 }; /* end of snic_host_req structure */
 
 
diff --git a/drivers/scsi/snic/snic_io.c b/drivers/scsi/snic/snic_io.c
index 993db7de4e4b..8e69548395b9 100644
--- a/drivers/scsi/snic/snic_io.c
+++ b/drivers/scsi/snic/snic_io.c
@@ -48,7 +48,7 @@ snic_wq_cmpl_frame_send(struct vnic_wq *wq,
 	SNIC_TRC(snic->shost->host_no, 0, 0,
 		 ((ulong)(buf->os_buf) - sizeof(struct snic_req_info)), 0, 0,
 		 0);
-	pci_unmap_single(snic->pdev, buf->dma_addr, buf->len, PCI_DMA_TODEVICE);
+
 	buf->os_buf = NULL;
 }
 
@@ -137,13 +137,36 @@ snic_select_wq(struct snic *snic)
 	return 0;
 }
 
+static int
+snic_wqdesc_avail(struct snic *snic, int q_num, int req_type)
+{
+	int nr_wqdesc = snic->config.wq_enet_desc_count;
+
+	if (q_num > 0) {
+		/*
+		 * Multi Queue case, additional care is required.
+		 * Per WQ active requests need to be maintained.
+		 */
+		SNIC_HOST_INFO(snic->shost, "desc_avail: Multi Queue case.\n");
+		SNIC_BUG_ON(q_num > 0);
+
+		return -1;
+	}
+
+	nr_wqdesc -= atomic64_read(&snic->s_stats.fw.actv_reqs);
+
+	return ((req_type == SNIC_REQ_HBA_RESET) ? nr_wqdesc : nr_wqdesc - 1);
+}
+
 int
 snic_queue_wq_desc(struct snic *snic, void *os_buf, u16 len)
 {
 	dma_addr_t pa = 0;
 	unsigned long flags;
 	struct snic_fw_stats *fwstats = &snic->s_stats.fw;
+	struct snic_host_req *req = (struct snic_host_req *) os_buf;
 	long act_reqs;
+	long desc_avail = 0;
 	int q_num = 0;
 
 	snic_print_desc(__func__, os_buf, len);
@@ -156,11 +179,15 @@ snic_queue_wq_desc(struct snic *snic, void *os_buf, u16 len)
 		return -ENOMEM;
 	}
 
+	req->req_pa = (ulong)pa;
+
 	q_num = snic_select_wq(snic);
 
 	spin_lock_irqsave(&snic->wq_lock[q_num], flags);
-	if (!svnic_wq_desc_avail(snic->wq)) {
+	desc_avail = snic_wqdesc_avail(snic, q_num, req->hdr.type);
+	if (desc_avail <= 0) {
 		pci_unmap_single(snic->pdev, pa, len, PCI_DMA_TODEVICE);
+		req->req_pa = 0;
 		spin_unlock_irqrestore(&snic->wq_lock[q_num], flags);
 		atomic64_inc(&snic->s_stats.misc.wq_alloc_fail);
 		SNIC_DBG("host = %d, WQ is Full\n", snic->shost->host_no);
@@ -169,10 +196,13 @@ snic_queue_wq_desc(struct snic *snic, void *os_buf, u16 len)
 	}
 
 	snic_queue_wq_eth_desc(&snic->wq[q_num], os_buf, pa, len, 0, 0, 1);
+	/*
+	 * Update stats
+	 * note: when multi queue enabled, fw actv_reqs should be per queue.
+	 */
+	act_reqs = atomic64_inc_return(&fwstats->actv_reqs);
 	spin_unlock_irqrestore(&snic->wq_lock[q_num], flags);
 
-	/* Update stats */
-	act_reqs = atomic64_inc_return(&fwstats->actv_reqs);
 	if (act_reqs > atomic64_read(&fwstats->max_actv_reqs))
 		atomic64_set(&fwstats->max_actv_reqs, act_reqs);
 
@@ -318,11 +348,31 @@ snic_req_free(struct snic *snic, struct snic_req_info *rqi)
 		      "Req_free:rqi %p:ioreq %p:abt %p:dr %p\n",
 		      rqi, rqi->req, rqi->abort_req, rqi->dr_req);
 
-	if (rqi->abort_req)
+	if (rqi->abort_req) {
+		if (rqi->abort_req->req_pa)
+			pci_unmap_single(snic->pdev,
+					 rqi->abort_req->req_pa,
+					 sizeof(struct snic_host_req),
+					 PCI_DMA_TODEVICE);
+
 		mempool_free(rqi->abort_req, snic->req_pool[SNIC_REQ_TM_CACHE]);
+	}
+
+	if (rqi->dr_req) {
+		if (rqi->dr_req->req_pa)
+			pci_unmap_single(snic->pdev,
+					 rqi->dr_req->req_pa,
+					 sizeof(struct snic_host_req),
+					 PCI_DMA_TODEVICE);
 
-	if (rqi->dr_req)
 		mempool_free(rqi->dr_req, snic->req_pool[SNIC_REQ_TM_CACHE]);
+	}
+
+	if (rqi->req->req_pa)
+		pci_unmap_single(snic->pdev,
+				 rqi->req->req_pa,
+				 rqi->req_len,
+				 PCI_DMA_TODEVICE);
 
 	mempool_free(rqi, snic->req_pool[rqi->rq_pool_type]);
 }
diff --git a/drivers/scsi/snic/snic_isr.c b/drivers/scsi/snic/snic_isr.c
index a85fae25ec8c..f552003128c6 100644
--- a/drivers/scsi/snic/snic_isr.c
+++ b/drivers/scsi/snic/snic_isr.c
@@ -38,7 +38,7 @@ snic_isr_msix_wq(int irq, void *data)
 	unsigned long wq_work_done = 0;
 
 	snic->s_stats.misc.last_isr_time = jiffies;
-	atomic64_inc(&snic->s_stats.misc.isr_cnt);
+	atomic64_inc(&snic->s_stats.misc.ack_isr_cnt);
 
 	wq_work_done = snic_wq_cmpl_handler(snic, -1);
 	svnic_intr_return_credits(&snic->intr[SNIC_MSIX_WQ],
@@ -56,7 +56,7 @@ snic_isr_msix_io_cmpl(int irq, void *data)
 	unsigned long iocmpl_work_done = 0;
 
 	snic->s_stats.misc.last_isr_time = jiffies;
-	atomic64_inc(&snic->s_stats.misc.isr_cnt);
+	atomic64_inc(&snic->s_stats.misc.cmpl_isr_cnt);
 
 	iocmpl_work_done = snic_fwcq_cmpl_handler(snic, -1);
 	svnic_intr_return_credits(&snic->intr[SNIC_MSIX_IO_CMPL],
@@ -73,7 +73,7 @@ snic_isr_msix_err_notify(int irq, void *data)
 	struct snic *snic = data;
 
 	snic->s_stats.misc.last_isr_time = jiffies;
-	atomic64_inc(&snic->s_stats.misc.isr_cnt);
+	atomic64_inc(&snic->s_stats.misc.errnotify_isr_cnt);
 
 	svnic_intr_return_all_credits(&snic->intr[SNIC_MSIX_ERR_NOTIFY]);
 	snic_log_q_error(snic);
diff --git a/drivers/scsi/snic/snic_main.c b/drivers/scsi/snic/snic_main.c
index 2b3c25371d76..396b32dca074 100644
--- a/drivers/scsi/snic/snic_main.c
+++ b/drivers/scsi/snic/snic_main.c
@@ -98,11 +98,18 @@ snic_slave_configure(struct scsi_device *sdev)
 static int
 snic_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
+	struct snic *snic = shost_priv(sdev->host);
 	int qsz = 0;
 
 	qsz = min_t(u32, qdepth, SNIC_MAX_QUEUE_DEPTH);
+	if (qsz < sdev->queue_depth)
+		atomic64_inc(&snic->s_stats.misc.qsz_rampdown);
+	else if (qsz > sdev->queue_depth)
+		atomic64_inc(&snic->s_stats.misc.qsz_rampup);
+
+	atomic64_set(&snic->s_stats.misc.last_qsz, sdev->queue_depth);
+
 	scsi_change_queue_depth(sdev, qsz);
-	SNIC_INFO("QDepth Changed to %d\n", sdev->queue_depth);
 
 	return sdev->queue_depth;
 }
@@ -624,19 +631,6 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_tmreq_pool;
 	}
 
-	/*
-	 * Initialization done with PCI system, hardware, firmware.
-	 * Add shost to SCSI
-	 */
-	ret = snic_add_host(shost, pdev);
-	if (ret) {
-		SNIC_HOST_ERR(shost,
-			      "Adding scsi host Failed ... exiting. %d\n",
-			      ret);
-
-		goto err_notify_unset;
-	}
-
 	spin_lock_irqsave(&snic_glob->snic_list_lock, flags);
 	list_add_tail(&snic->list, &snic_glob->snic_list);
 	spin_unlock_irqrestore(&snic_glob->snic_list_lock, flags);
@@ -669,8 +663,6 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (i = 0; i < snic->intr_count; i++)
 		svnic_intr_unmask(&snic->intr[i]);
 
-	snic_set_state(snic, SNIC_ONLINE);
-
 	/* Get snic params */
 	ret = snic_get_conf(snic);
 	if (ret) {
@@ -681,6 +673,21 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_get_conf;
 	}
 
+	/*
+	 * Initialization done with PCI system, hardware, firmware.
+	 * Add shost to SCSI
+	 */
+	ret = snic_add_host(shost, pdev);
+	if (ret) {
+		SNIC_HOST_ERR(shost,
+			      "Adding scsi host Failed ... exiting. %d\n",
+			      ret);
+
+		goto err_get_conf;
+	}
+
+	snic_set_state(snic, SNIC_ONLINE);
+
 	ret = snic_disc_start(snic);
 	if (ret) {
 		SNIC_HOST_ERR(shost, "snic_probe:Discovery Failed w err = %d\n",
@@ -705,6 +712,8 @@ err_req_intr:
 	svnic_dev_disable(snic->vdev);
 
 err_vdev_enable:
+	svnic_dev_notify_unset(snic->vdev);
+
 	for (i = 0; i < snic->wq_count; i++) {
 		int rc = 0;
 
@@ -718,9 +727,6 @@ err_vdev_enable:
 	}
 	snic_del_host(snic->shost);
 
-err_notify_unset:
-	svnic_dev_notify_unset(snic->vdev);
-
 err_free_tmreq_pool:
 	mempool_destroy(snic->req_pool[SNIC_REQ_TM_CACHE]);
 
diff --git a/drivers/scsi/snic/snic_scsi.c b/drivers/scsi/snic/snic_scsi.c
index 2c7b4c321cbe..abada16b375b 100644
--- a/drivers/scsi/snic/snic_scsi.c
+++ b/drivers/scsi/snic/snic_scsi.c
@@ -221,11 +221,15 @@ snic_queue_icmnd_req(struct snic *snic,
 			pa, /* sense buffer pa */
 			SCSI_SENSE_BUFFERSIZE);
 
+	atomic64_inc(&snic->s_stats.io.active);
 	ret = snic_queue_wq_desc(snic, rqi->req, rqi->req_len);
-	if (ret)
+	if (ret) {
+		atomic64_dec(&snic->s_stats.io.active);
 		SNIC_HOST_ERR(snic->shost,
 			      "QIcmnd: Queuing Icmnd Failed. ret = %d\n",
 			      ret);
+	} else
+		snic_stats_update_active_ios(&snic->s_stats);
 
 	return ret;
 } /* end of snic_queue_icmnd_req */
@@ -361,8 +365,7 @@ snic_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc)
 	if (ret) {
 		SNIC_HOST_ERR(shost, "Failed to Q, Scsi Req w/ err %d.\n", ret);
 		ret = SCSI_MLQUEUE_HOST_BUSY;
-	} else
-		snic_stats_update_active_ios(&snic->s_stats);
+	}
 
 	atomic_dec(&snic->ios_inflight);
 
@@ -598,6 +601,12 @@ snic_icmnd_cmpl_handler(struct snic *snic, struct snic_fw_req *fwreq)
 		      sc->device->lun, sc, sc->cmnd[0], snic_cmd_tag(sc),
 		      CMD_FLAGS(sc), rqi);
 
+	if (CMD_FLAGS(sc) & SNIC_HOST_RESET_CMD_TERM) {
+		spin_unlock_irqrestore(io_lock, flags);
+
+		return;
+	}
+
 	SNIC_BUG_ON(rqi != (struct snic_req_info *)ctx);
 	WARN_ON_ONCE(req);
 	if (!rqi) {
@@ -779,6 +788,11 @@ snic_process_itmf_cmpl(struct snic *snic,
 
 	io_lock = snic_io_lock_hash(snic, sc);
 	spin_lock_irqsave(io_lock, flags);
+	if (CMD_FLAGS(sc) & SNIC_HOST_RESET_CMD_TERM) {
+		spin_unlock_irqrestore(io_lock, flags);
+
+		return ret;
+	}
 	rqi = (struct snic_req_info *) CMD_SP(sc);
 	WARN_ON_ONCE(!rqi);
 
@@ -1001,10 +1015,11 @@ snic_hba_reset_cmpl_handler(struct snic *snic, struct snic_fw_req *fwreq)
 	unsigned long flags, gflags;
 	int ret = 0;
 
+	snic_io_hdr_dec(&fwreq->hdr, &typ, &hdr_stat, &cmnd_id, &hid, &ctx);
 	SNIC_HOST_INFO(snic->shost,
-		       "reset_cmpl:HBA Reset Completion received.\n");
+		       "reset_cmpl:Tag %d ctx %lx cmpl status %s HBA Reset Completion received.\n",
+		       cmnd_id, ctx, snic_io_status_to_str(hdr_stat));
 
-	snic_io_hdr_dec(&fwreq->hdr, &typ, &hdr_stat, &cmnd_id, &hid, &ctx);
 	SNIC_SCSI_DBG(snic->shost,
 		      "reset_cmpl: type = %x, hdr_stat = %x, cmnd_id = %x, hid = %x, ctx = %lx\n",
 		      typ, hdr_stat, cmnd_id, hid, ctx);
@@ -1012,6 +1027,9 @@ snic_hba_reset_cmpl_handler(struct snic *snic, struct snic_fw_req *fwreq)
 	/* spl case, host reset issued through ioctl */
 	if (cmnd_id == SCSI_NO_TAG) {
 		rqi = (struct snic_req_info *) ctx;
+		SNIC_HOST_INFO(snic->shost,
+			       "reset_cmpl:Tag %d ctx %lx cmpl stat %s\n",
+			       cmnd_id, ctx, snic_io_status_to_str(hdr_stat));
 		sc = rqi->sc;
 
 		goto ioctl_hba_rst;
@@ -1038,6 +1056,10 @@ ioctl_hba_rst:
 		return ret;
 	}
 
+	SNIC_HOST_INFO(snic->shost,
+		       "reset_cmpl: sc %p rqi %p Tag %d flags 0x%llx\n",
+		       sc, rqi, cmnd_id, CMD_FLAGS(sc));
+
 	io_lock = snic_io_lock_hash(snic, sc);
 	spin_lock_irqsave(io_lock, flags);
 
@@ -1454,11 +1476,19 @@ snic_abort_finish(struct snic *snic, struct scsi_cmnd *sc)
 	case SNIC_STAT_IO_SUCCESS:
 	case SNIC_STAT_IO_NOT_FOUND:
 		ret = SUCCESS;
+		/*
+		 * If abort path doesn't call scsi_done(),
+		 * the # IO timeouts == 2, will cause the LUN offline.
+		 * Call scsi_done to complete the IO.
+		 */
+		sc->result = (DID_ERROR << 16);
+		sc->scsi_done(sc);
 		break;
 
 	default:
 		/* Firmware completed abort with error */
 		ret = FAILED;
+		rqi = NULL;
 		break;
 	}
 
@@ -1554,6 +1584,7 @@ snic_send_abort_and_wait(struct snic *snic, struct scsi_cmnd *sc)
 	/* Now Queue the abort command to firmware */
 	ret = snic_queue_abort_req(snic, rqi, sc, tmf);
 	if (ret) {
+		atomic64_inc(&snic->s_stats.abts.q_fail);
 		SNIC_HOST_ERR(snic->shost,
 			      "send_abt_cmd: IO w/ Tag 0x%x fail w/ err %d flags 0x%llx\n",
 			      tag, ret, CMD_FLAGS(sc));
@@ -1830,6 +1861,9 @@ snic_dr_clean_single_req(struct snic *snic,
 
 	snic_release_req_buf(snic, rqi, sc);
 
+	sc->result = (DID_ERROR << 16);
+	sc->scsi_done(sc);
+
 	ret = 0;
 
 	return ret;
@@ -2384,6 +2418,13 @@ snic_cmpl_pending_tmreq(struct snic *snic, struct scsi_cmnd *sc)
 		      "Completing Pending TM Req sc %p, state %s flags 0x%llx\n",
 		      sc, snic_io_status_to_str(CMD_STATE(sc)), CMD_FLAGS(sc));
 
+	/*
+	 * CASE : FW didn't post itmf completion due to PCIe Errors.
+	 * Marking the abort status as Success to call scsi completion
+	 * in snic_abort_finish()
+	 */
+	CMD_ABTS_STATUS(sc) = SNIC_STAT_IO_SUCCESS;
+
 	rqi = (struct snic_req_info *) CMD_SP(sc);
 	if (!rqi)
 		return;
@@ -2459,8 +2500,9 @@ snic_scsi_cleanup(struct snic *snic, int ex_tag)
 cleanup:
 		sc->result = DID_TRANSPORT_DISRUPTED << 16;
 		SNIC_HOST_INFO(snic->shost,
-			       "sc_clean: DID_TRANSPORT_DISRUPTED for sc %p. rqi %p duration %llu msecs\n",
-			       sc, rqi, (jiffies - st_time));
+			       "sc_clean: DID_TRANSPORT_DISRUPTED for sc %p, Tag %d flags 0x%llx rqi %p duration %u msecs\n",
+			       sc, sc->request->tag, CMD_FLAGS(sc), rqi,
+			       jiffies_to_msecs(jiffies - st_time));
 
 		/* Update IO stats */
 		snic_stats_update_io_cmpl(&snic->s_stats);
diff --git a/drivers/scsi/snic/snic_stats.h b/drivers/scsi/snic/snic_stats.h
index 11e614849a82..fd1066b1cad5 100644
--- a/drivers/scsi/snic/snic_stats.h
+++ b/drivers/scsi/snic/snic_stats.h
@@ -42,6 +42,7 @@ struct snic_abort_stats {
 	atomic64_t drv_tmo;	/* Abort Driver Timeouts */
 	atomic64_t fw_tmo;	/* Abort Firmware Timeouts */
 	atomic64_t io_not_found;/* Abort IO Not Found */
+	atomic64_t q_fail;	/* Abort Queuing Failed */
 };
 
 struct snic_reset_stats {
@@ -69,7 +70,9 @@ struct snic_fw_stats {
 struct snic_misc_stats {
 	u64	last_isr_time;
 	u64	last_ack_time;
-	atomic64_t isr_cnt;
+	atomic64_t ack_isr_cnt;
+	atomic64_t cmpl_isr_cnt;
+	atomic64_t errnotify_isr_cnt;
 	atomic64_t max_cq_ents;		/* Max CQ Entries */
 	atomic64_t data_cnt_mismat;	/* Data Count Mismatch */
 	atomic64_t io_tmo;
@@ -81,6 +84,9 @@ struct snic_misc_stats {
 	atomic64_t no_icmnd_itmf_cmpls;
 	atomic64_t io_under_run;
 	atomic64_t qfull;
+	atomic64_t qsz_rampup;
+	atomic64_t qsz_rampdown;
+	atomic64_t last_qsz;
 	atomic64_t tgt_not_rdy;
 };
 
@@ -101,9 +107,9 @@ static inline void
 snic_stats_update_active_ios(struct snic_stats *s_stats)
 {
 	struct snic_io_stats *io = &s_stats->io;
-	u32 nr_active_ios;
+	int nr_active_ios;
 
-	nr_active_ios = atomic64_inc_return(&io->active);
+	nr_active_ios = atomic64_read(&io->active);
 	if (atomic64_read(&io->max_active) < nr_active_ios)
 		atomic64_set(&io->max_active, nr_active_ios);
 
diff --git a/drivers/scsi/snic/vnic_dev.c b/drivers/scsi/snic/vnic_dev.c
index e0b5549bc9fb..dad5fc66effb 100644
--- a/drivers/scsi/snic/vnic_dev.c
+++ b/drivers/scsi/snic/vnic_dev.c
@@ -263,12 +263,20 @@ static int _svnic_dev_cmd2(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
 	int wait)
 {
 	struct devcmd2_controller *dc2c = vdev->devcmd2;
-	struct devcmd2_result *result = dc2c->result + dc2c->next_result;
+	struct devcmd2_result *result = NULL;
 	unsigned int i;
 	int delay;
 	int err;
 	u32 posted;
+	u32 fetch_idx;
 	u32 new_posted;
+	u8 color;
+
+	fetch_idx = ioread32(&dc2c->wq_ctrl->fetch_index);
+	if (fetch_idx == 0xFFFFFFFF) { /* check for hardware gone  */
+		/* Hardware surprise removal: return error */
+		return -ENODEV;
+	}
 
 	posted = ioread32(&dc2c->wq_ctrl->posted_index);
 
@@ -278,6 +286,13 @@ static int _svnic_dev_cmd2(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
 	}
 
 	new_posted = (posted + 1) % DEVCMD2_RING_SIZE;
+	if (new_posted == fetch_idx) {
+		pr_err("%s: wq is full while issuing devcmd2 command %d, fetch index: %u, posted index: %u\n",
+			pci_name(vdev->pdev), _CMD_N(cmd), fetch_idx, posted);
+
+		return -EBUSY;
+	}
+
 	dc2c->cmd_ring[posted].cmd = cmd;
 	dc2c->cmd_ring[posted].flags = 0;
 
@@ -299,14 +314,22 @@ static int _svnic_dev_cmd2(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
 	if (dc2c->cmd_ring[posted].flags & DEVCMD2_FNORESULT)
 		return 0;
 
+	result = dc2c->result + dc2c->next_result;
+	color = dc2c->color;
+
+	/*
+	 * Increment next_result, after posting the devcmd, irrespective of
+	 * devcmd result, and it should be done only once.
+	 */
+	dc2c->next_result++;
+	if (dc2c->next_result == dc2c->result_size) {
+		dc2c->next_result = 0;
+		dc2c->color = dc2c->color ? 0 : 1;
+	}
+
 	for (delay = 0; delay < wait; delay++) {
 		udelay(100);
-		if (result->color == dc2c->color) {
-			dc2c->next_result++;
-			if (dc2c->next_result == dc2c->result_size) {
-				dc2c->next_result = 0;
-				dc2c->color = dc2c->color ? 0 : 1;
-			}
+		if (result->color == color) {
 			if (result->error) {
 				err = (int) result->error;
 				if (err != ERR_ECMDUNKNOWN ||
@@ -317,13 +340,6 @@ static int _svnic_dev_cmd2(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
 				return err;
 			}
 			if (_CMD_DIR(cmd) & _CMD_DIR_READ) {
-				/*
-				 * Adding the rmb() prevents the compiler
-				 * and/or CPU from reordering the reads which
-				 * would potentially result in reading stale
-				 * values.
-				 */
-				rmb();
 				for (i = 0; i < VNIC_DEVCMD_NARGS; i++)
 					vdev->args[i] = result->results[i];
 			}
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 71c5138ddf94..7af5226aa55b 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -1974,9 +1974,12 @@ static long read_tape(struct scsi_tape *STp, long count,
 					transfer = (int)cmdstatp->uremainder64;
 				else
 					transfer = 0;
-				if (STp->block_size == 0 &&
-				    cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR)
-					transfer = bytes;
+				if (cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR) {
+					if (STp->block_size == 0)
+						transfer = bytes;
+					/* Some drives set ILI with MEDIUM ERROR */
+					cmdstatp->flags &= ~SENSE_ILI;
+				}
 
 				if (cmdstatp->flags & SENSE_ILI) {	/* ILI */
 					if (STp->block_size == 0 &&
@@ -4941,7 +4944,7 @@ static int sgl_map_user_pages(struct st_buffer *STbp,
  out_unmap:
 	if (res > 0) {
 		for (j=0; j < res; j++)
-			page_cache_release(pages[j]);
+			put_page(pages[j]);
 		res = 0;
 	}
 	kfree(pages);
@@ -4963,7 +4966,7 @@ static int sgl_unmap_user_pages(struct st_buffer *STbp,
 		/* FIXME: cache flush missing for rw==READ
 		 * FIXME: call the correct reference counting function
 		 */
-		page_cache_release(page);
+		put_page(page);
 	}
 	kfree(STbp->mapped_pages);
 	STbp->mapped_pages = NULL;
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index b9de487bbd31..3c4c07038948 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -36,14 +36,10 @@
 #include <scsi/scsi_host.h>
 #include "sun3_scsi.h"
 
-/* Definitions for the core NCR5380 driver. */
-
-#define REAL_DMA
-/* #define SUPPORT_TAGS */
 /* minimum number of bytes to do dma on */
 #define DMA_MIN_SIZE                    129
 
-/* #define MAX_TAGS                     32 */
+/* Definitions for the core NCR5380 driver. */
 
 #define NCR5380_implementation_fields   /* none */
 
@@ -55,14 +51,12 @@
 #define NCR5380_abort                   sun3scsi_abort
 #define NCR5380_info                    sun3scsi_info
 
-#define NCR5380_dma_read_setup(instance, data, count) \
-        sun3scsi_dma_setup(instance, data, count, 0)
-#define NCR5380_dma_write_setup(instance, data, count) \
-        sun3scsi_dma_setup(instance, data, count, 1)
+#define NCR5380_dma_recv_setup(instance, data, count) (count)
+#define NCR5380_dma_send_setup(instance, data, count) (count)
 #define NCR5380_dma_residual(instance) \
         sun3scsi_dma_residual(instance)
 #define NCR5380_dma_xfer_len(instance, cmd, phase) \
-        sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
+        sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd)
 
 #define NCR5380_acquire_dma_irq(instance)    (1)
 #define NCR5380_release_dma_irq(instance)
@@ -78,10 +72,6 @@ static int setup_cmd_per_lun = -1;
 module_param(setup_cmd_per_lun, int, 0);
 static int setup_sg_tablesize = -1;
 module_param(setup_sg_tablesize, int, 0);
-#ifdef SUPPORT_TAGS
-static int setup_use_tagged_queuing = -1;
-module_param(setup_use_tagged_queuing, int, 0);
-#endif
 static int setup_hostid = -1;
 module_param(setup_hostid, int, 0);
 
@@ -263,14 +253,13 @@ static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
 	return last_residual;
 }
 
-static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
-						  struct scsi_cmnd *cmd,
-						  int write_flag)
+static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted_len,
+                                                  struct scsi_cmnd *cmd)
 {
-	if (cmd->request->cmd_type == REQ_TYPE_FS)
- 		return wanted;
-	else
+	if (wanted_len < DMA_MIN_SIZE || cmd->request->cmd_type != REQ_TYPE_FS)
 		return 0;
+
+	return wanted_len;
 }
 
 static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
@@ -408,7 +397,7 @@ static int sun3scsi_dma_finish(int write_flag)
 
 }
 	
-#include "atari_NCR5380.c"
+#include "NCR5380.c"
 
 #ifdef SUN3_SCSI_VME
 #define SUN3_SCSI_NAME          "Sun3 NCR5380 VME SCSI"
@@ -516,10 +505,6 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
 	instance->io_port = (unsigned long)ioaddr;
 	instance->irq = irq->start;
 
-#ifdef SUPPORT_TAGS
-	host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
-#endif
-
 	error = NCR5380_init(instance, host_flags);
 	if (error)
 		goto fail_init;
@@ -527,15 +512,9 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
 	error = request_irq(instance->irq, scsi_sun3_intr, 0,
 	                    "NCR5380", instance);
 	if (error) {
-#ifdef REAL_DMA
 		pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
 		       instance->host_no, instance->irq);
 		goto fail_irq;
-#else
-		pr_warn(PFX "scsi%d: IRQ %d not free, interrupts disabled\n",
-		        instance->host_no, instance->irq);
-		instance->irq = NO_IRQ;
-#endif
 	}
 
 	dregs->csr = 0;
@@ -565,8 +544,7 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
 	return 0;
 
 fail_host:
-	if (instance->irq != NO_IRQ)
-		free_irq(instance->irq, instance);
+	free_irq(instance->irq, instance);
 fail_irq:
 	NCR5380_exit(instance);
 fail_init:
@@ -583,8 +561,7 @@ static int __exit sun3_scsi_remove(struct platform_device *pdev)
 	struct Scsi_Host *instance = platform_get_drvdata(pdev);
 
 	scsi_remove_host(instance);
-	if (instance->irq != NO_IRQ)
-		free_irq(instance->irq, instance);
+	free_irq(instance->irq, instance);
 	NCR5380_exit(instance);
 	scsi_host_put(instance);
 	if (udc_regs)
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index 4615fda60dbd..8a8608ac62e6 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -1,5 +1,3 @@
-#define PSEUDO_DMA
-
 /*
  * Trantor T128/T128F/T228 driver
  *	Note : architecturally, the T100 and T130 are different and won't 
@@ -76,7 +74,6 @@
 
 #include <scsi/scsi_host.h>
 #include "t128.h"
-#define AUTOPROBE_IRQ
 #include "NCR5380.h"
 
 static struct override {
@@ -210,7 +207,7 @@ found:
 	instance->base = base;
 	((struct NCR5380_hostdata *)instance->hostdata)->base = p;
 
-	if (NCR5380_init(instance, 0))
+	if (NCR5380_init(instance, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP))
 		goto out_unregister;
 
 	NCR5380_maybe_reset_bus(instance);
@@ -294,7 +291,7 @@ static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
 }
 
 /*
- * Function : int NCR5380_pread (struct Scsi_Host *instance, 
+ * Function : int t128_pread (struct Scsi_Host *instance,
  *	unsigned char *dst, int len)
  *
  * Purpose : Fast 5380 pseudo-dma read function, transfers len bytes to 
@@ -306,8 +303,8 @@ static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
  * 	timeout.
  */
 
-static inline int
-NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
+static inline int t128_pread(struct Scsi_Host *instance,
+                             unsigned char *dst, int len)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	void __iomem *reg, *base = hostdata->base;
@@ -340,7 +337,7 @@ NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
 }
 
 /*
- * Function : int NCR5380_pwrite (struct Scsi_Host *instance, 
+ * Function : int t128_pwrite (struct Scsi_Host *instance,
  *	unsigned char *src, int len)
  *
  * Purpose : Fast 5380 pseudo-dma write function, transfers len bytes from
@@ -352,8 +349,8 @@ NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
  * 	timeout.
  */
 
-static inline int
-NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
+static inline int t128_pwrite(struct Scsi_Host *instance,
+                              unsigned char *src, int len)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	void __iomem *reg, *base = hostdata->base;
@@ -394,8 +391,6 @@ static struct scsi_host_template driver_template = {
 	.detect			= t128_detect,
 	.release		= t128_release,
 	.proc_name		= "t128",
-	.show_info		= t128_show_info,
-	.write_info		= t128_write_info,
 	.info			= t128_info,
 	.queuecommand		= t128_queue_command,
 	.eh_abort_handler	= t128_abort,
diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h
index dd16d85497e1..c95bcd839109 100644
--- a/drivers/scsi/t128.h
+++ b/drivers/scsi/t128.h
@@ -77,14 +77,17 @@
 #define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
 
 #define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+#define NCR5380_dma_recv_setup		t128_pread
+#define NCR5380_dma_send_setup		t128_pwrite
+#define NCR5380_dma_residual(instance)	(0)
 
 #define NCR5380_intr t128_intr
 #define NCR5380_queue_command t128_queue_command
 #define NCR5380_abort t128_abort
 #define NCR5380_bus_reset t128_bus_reset
 #define NCR5380_info t128_info
-#define NCR5380_show_info t128_show_info
-#define NCR5380_write_info t128_write_info
+
+#define NCR5380_io_delay(x)		udelay(x)
 
 /* 15 14 12 10 7 5 3
    1101 0100 1010 1000 */