diff options
author | James Smart <james.smart@emulex.com> | 2013-04-17 20:18:07 -0400 |
---|---|---|
committer | James Bottomley <JBottomley@Parallels.com> | 2013-05-02 13:02:40 -0700 |
commit | a6887e2874916aff0f56ae8f2cded797fa9b2225 (patch) | |
tree | a1df62951bea3f1c8b97902d5d75ea747a42f73f /drivers/scsi | |
parent | a40fc5f0d052d468f66da5fab3be0adb6cb6443d (diff) | |
download | linux-a6887e2874916aff0f56ae8f2cded797fa9b2225.tar.bz2 |
[SCSI] lpfc 8.3.39: Fixed BlockGuard to take advantage of rdprotect/wrprotect info when available
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hw.h | 1 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_scsi.c | 181 |
2 files changed, 116 insertions, 66 deletions
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index e8c476031703..83700c18f468 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1667,6 +1667,7 @@ enum lpfc_protgrp_type { #define BG_OP_IN_CSUM_OUT_CSUM 0x5 #define BG_OP_IN_CRC_OUT_CSUM 0x6 #define BG_OP_IN_CSUM_OUT_CRC 0x7 +#define BG_OP_RAW_MODE 0x8 struct lpfc_pde5 { uint32_t word0; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index be11bb9cb176..44995de74a62 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -68,6 +68,10 @@ struct scsi_dif_tuple { __be32 ref_tag; /* Target LBA or indirect LBA */ }; +#if !defined(SCSI_PROT_GUARD_CHECK) || !defined(SCSI_PROT_REF_CHECK) +#define scsi_prot_flagged(sc, flg) sc +#endif + static void lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb); static void @@ -2066,9 +2070,21 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); bf_set(pde6_optx, pde6, txop); bf_set(pde6_oprx, pde6, rxop); + + /* + * We only need to check the data on READs, for WRITEs + * protection data is automatically generated, not checked. + */ if (datadir == DMA_FROM_DEVICE) { - bf_set(pde6_ce, pde6, checking); - bf_set(pde6_re, pde6, checking); + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) + bf_set(pde6_ce, pde6, checking); + else + bf_set(pde6_ce, pde6, 0); + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(pde6_re, pde6, checking); + else + bf_set(pde6_re, pde6, 0); } bf_set(pde6_ai, pde6, 1); bf_set(pde6_ae, pde6, 0); @@ -2221,8 +2237,17 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); bf_set(pde6_optx, pde6, txop); bf_set(pde6_oprx, pde6, rxop); - bf_set(pde6_ce, pde6, checking); - bf_set(pde6_re, pde6, checking); + + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) + bf_set(pde6_ce, pde6, checking); + else + bf_set(pde6_ce, pde6, 0); + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(pde6_re, pde6, checking); + else + bf_set(pde6_re, pde6, 0); + bf_set(pde6_ai, pde6, 1); bf_set(pde6_ae, pde6, 0); bf_set(pde6_apptagval, pde6, 0); @@ -2385,7 +2410,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct sli4_sge_diseed *diseed = NULL; dma_addr_t physaddr; int i = 0, num_sge = 0, status; - int datadir = sc->sc_data_direction; uint32_t reftag; unsigned blksize; uint8_t txop, rxop; @@ -2423,13 +2447,26 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, diseed->ref_tag = cpu_to_le32(reftag); diseed->ref_tag_tran = diseed->ref_tag; + /* + * We only need to check the data on READs, for WRITEs + * protection data is automatically generated, not checked. + */ + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_ce, diseed, 0); + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_re, diseed, 0); + } + /* setup DISEED with the rest of the info */ bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); - if (datadir == DMA_FROM_DEVICE) { - bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); - bf_set(lpfc_sli4_sge_dif_re, diseed, checking); - } + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); bf_set(lpfc_sli4_sge_dif_me, diseed, 0); @@ -2571,11 +2608,34 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, diseed->ref_tag = cpu_to_le32(reftag); diseed->ref_tag_tran = diseed->ref_tag; + if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) { + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + + } else { + bf_set(lpfc_sli4_sge_dif_ce, diseed, 0); + /* + * When in this mode, the hardware will replace + * the guard tag from the host with a + * newly generated good CRC for the wire. + * Switch to raw mode here to avoid this + * behavior. What the host sends gets put on the wire. + */ + if (txop == BG_OP_IN_CRC_OUT_CRC) { + txop = BG_OP_RAW_MODE; + rxop = BG_OP_RAW_MODE; + } + } + + + if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK)) + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_re, diseed, 0); + /* setup DISEED with the rest of the info */ bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); - bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); - bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); bf_set(lpfc_sli4_sge_dif_me, diseed, 0); @@ -2739,6 +2799,47 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc) } /** + * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be adjusted. + * + * Adjust the data length to account for how much data + * is actually on the wire. + * + * returns the adjusted data length + **/ +static int +lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba, + struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scsi_cmnd *sc = lpfc_cmd->pCmd; + int fcpdl; + + fcpdl = scsi_bufflen(sc); + + /* Check if there is protection data on the wire */ + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + /* Read */ + if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT) + return fcpdl; + + } else { + /* Write */ + if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP) + return fcpdl; + } + + /* + * If we are in DIF Type 1 mode every data block has a 8 byte + * DIF (trailer) attached to it. Must ajust FCP data length. + */ + if (scsi_prot_flagged(sc, SCSI_PROT_TRANSFER_PI)) + fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8; + + return fcpdl; +} + +/** * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be prep'ed. @@ -2758,8 +2859,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, uint32_t num_bde = 0; int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; int prot_group_type = 0; - int diflen, fcpdl; - unsigned blksize; + int fcpdl; /* * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd @@ -2856,18 +2956,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, iocb_cmd->ulpBdeCount = 1; iocb_cmd->ulpLe = 1; - fcpdl = scsi_bufflen(scsi_cmnd); - - if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) { - /* - * We are in DIF Type 1 mode - * Every data block has a 8 byte DIF (trailer) - * attached to it. Must ajust FCP data length - */ - blksize = lpfc_cmd_blksize(scsi_cmnd); - diflen = (fcpdl / blksize) * 8; - fcpdl += diflen; - } + fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); /* @@ -2982,7 +3071,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) chk_guard = 1; guard_type = scsi_host_get_guard(cmd->device->host); - start_ref_tag = scsi_get_lba(cmd); + start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */ start_app_tag = src->app_tag; src = (struct scsi_dif_tuple *)sg_virt(sgpe); len = sgpe->length; @@ -3398,45 +3487,6 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) } /** - * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard - * @phba: The Hba for which this call is being executed. - * @lpfc_cmd: The scsi buffer which is going to be adjusted. - * - * Adjust the data length to account for how much data - * is actually on the wire. - * - * returns the adjusted data length - **/ -static int -lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba, - struct lpfc_scsi_buf *lpfc_cmd) -{ - struct scsi_cmnd *sc = lpfc_cmd->pCmd; - int diflen, fcpdl; - unsigned blksize; - - fcpdl = scsi_bufflen(sc); - - /* Check if there is protection data on the wire */ - if (sc->sc_data_direction == DMA_FROM_DEVICE) { - /* Read */ - if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT) - return fcpdl; - - } else { - /* Write */ - if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP) - return fcpdl; - } - - /* If protection data on the wire, adjust the count accordingly */ - blksize = lpfc_cmd_blksize(sc); - diflen = (fcpdl / blksize) * 8; - fcpdl += diflen; - return fcpdl; -} - -/** * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. @@ -3564,7 +3614,6 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, } fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); - fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); /* |