diff options
| author | Finn Thain <fthain@telegraphics.com.au> | 2017-01-15 18:50:57 -0500 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2017-01-31 21:37:44 -0500 |
| commit | 9507037304e581493bcd8bf76e013e44be71470e (patch) | |
| tree | 844dfa7cb4abd2a7affb40d40cbad1da4b8d979d /drivers/scsi | |
| parent | 090284610632bb32a5d2eea41420ee7c2b6975ca (diff) | |
| download | linux-9507037304e581493bcd8bf76e013e44be71470e.tar.bz2 | |
scsi: ncr5380: Clean up dead code and redundant macro usage
Remove dead code inside #if 0 conditionals.
Remove the #ifdef __KERNEL__ test, since NCR5380.h has no definitions
that relate to userspace code.
Remove two redundant macro definitions which were overlooked in
commit e9db3198e08b ("sun3_scsi: Adopt NCR5380.c core driver").
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/NCR5380.h | 7 | ||||
| -rw-r--r-- | drivers/scsi/atari_scsi.c | 31 | ||||
| -rw-r--r-- | drivers/scsi/sun3_scsi.c | 3 |
3 files changed, 0 insertions, 41 deletions
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h index e61d9f9987fa..d78f0957d865 100644 --- a/drivers/scsi/NCR5380.h +++ b/drivers/scsi/NCR5380.h @@ -166,11 +166,7 @@ #define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */ #define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */ -#if 0 -#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR -#else #define CSR_BASE CSR_53C80_INTR -#endif /* Note : PHASE_* macros are based on the values of the STATUS register */ #define PHASE_MASK (SR_MSG | SR_CD | SR_IO) @@ -229,8 +225,6 @@ struct NCR5380_hostdata { char info[168]; /* Host banner message */ }; -#ifdef __KERNEL__ - struct NCR5380_cmd { struct list_head list; }; @@ -323,5 +317,4 @@ static inline int NCR5380_dma_residual_none(struct NCR5380_hostdata *hostdata) return 0; } -#endif /* __KERNEL__ */ #endif /* NCR5380_H */ diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index 105b35393ce9..2b6eb7c24c69 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -178,37 +178,6 @@ static int scsi_dma_is_ignored_buserr(unsigned char dma_stat) } -#if 0 -/* Dead code... wasn't called anyway :-) and causes some trouble, because at - * end-of-DMA, both SCSI ints are triggered simultaneously, so the NCR int has - * to clear the DMA int pending bit before it allows other level 6 interrupts. - */ -static void scsi_dma_buserr(int irq, void *dummy) -{ - unsigned char dma_stat = tt_scsi_dma.dma_ctrl; - - /* Don't do anything if a NCR interrupt is pending. Probably it's just - * masked... */ - if (atari_irq_pending(IRQ_TT_MFP_SCSI)) - return; - - printk("Bad SCSI DMA interrupt! dma_addr=0x%08lx dma_stat=%02x dma_cnt=%08lx\n", - SCSI_DMA_READ_P(dma_addr), dma_stat, SCSI_DMA_READ_P(dma_cnt)); - if (dma_stat & 0x80) { - if (!scsi_dma_is_ignored_buserr(dma_stat)) - printk("SCSI DMA bus error -- bad DMA programming!\n"); - } else { - /* Under normal circumstances we never should get to this point, - * since both interrupts are triggered simultaneously and the 5380 - * int has higher priority. When this irq is handled, that DMA - * interrupt is cleared. So a warning message is printed here. - */ - printk("SCSI DMA intr ?? -- this shouldn't happen!\n"); - } -} -#endif - - static irqreturn_t scsi_tt_intr(int irq, void *dev) { struct Scsi_Host *instance = dev; diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index 88db6992420e..166f466964c4 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -56,9 +56,6 @@ #define NCR5380_dma_send_setup sun3scsi_dma_count #define NCR5380_dma_residual sun3scsi_dma_residual -#define NCR5380_acquire_dma_irq(instance) (1) -#define NCR5380_release_dma_irq(instance) - #include "NCR5380.h" |