Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set consists of the usual driver updates (megaraid_sas,
  arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several
  assorted fixes and miscellaneous updates (including the
  pci_msix_enable_range() changes that have been pending for a while)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits)
  scsi: add a CONFIG_SCSI_MQ_DEFAULT option
  ufs: definitions for phy interface
  ufs: tune bkops while power managment events
  ufs: Add support for clock scaling using devfreq framework
  ufs: Add freq-table-hz property for UFS device
  ufs: Add support for clock gating
  ufs: refactor configuring power mode
  ufs: add UFS power management support
  ufs: introduce well known logical unit in ufs
  ufs: manually add well known logical units
  ufs: Active Power Mode - configuring bActiveICCLevel
  ufs: improve init sequence
  ufs: refactor query descriptor API support
  ufs: add voting support for host controller power
  ufs: Add clock initialization support
  ufs: Add regulator enable support
  ufs: Allow vendor specific initialization
  scsi: don't add scsi_device if its already visible
  scsi: fix the type for well known LUs
  scsi: fix comment in struct Scsi_Host definition
  ...

1 files changed, 56 insertions, 0 deletions

diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 0bb8041c047a..3fc3e21b746b 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -13,6 +13,44 @@
 #define _UNIPRO_H_
 
 /*
+ * M-TX Configuration Attributes
+ */
+#define TX_MODE					0x0021
+#define TX_HSRATE_SERIES			0x0022
+#define TX_HSGEAR				0x0023
+#define TX_PWMGEAR				0x0024
+#define TX_AMPLITUDE				0x0025
+#define TX_HS_SLEWRATE				0x0026
+#define TX_SYNC_SOURCE				0x0027
+#define TX_HS_SYNC_LENGTH			0x0028
+#define TX_HS_PREPARE_LENGTH			0x0029
+#define TX_LS_PREPARE_LENGTH			0x002A
+#define TX_HIBERN8_CONTROL			0x002B
+#define TX_LCC_ENABLE				0x002C
+#define TX_PWM_BURST_CLOSURE_EXTENSION		0x002D
+#define TX_BYPASS_8B10B_ENABLE			0x002E
+#define TX_DRIVER_POLARITY			0x002F
+#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE	0x0030
+#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE	0x0031
+#define TX_LCC_SEQUENCER			0x0032
+#define TX_MIN_ACTIVATETIME			0x0033
+#define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+
+/*
+ * M-RX Configuration Attributes
+ */
+#define RX_MODE					0x00A1
+#define RX_HSRATE_SERIES			0x00A2
+#define RX_HSGEAR				0x00A3
+#define RX_PWMGEAR				0x00A4
+#define RX_LS_TERMINATED_ENABLE			0x00A5
+#define RX_HS_UNTERMINATED_ENABLE		0x00A6
+#define RX_ENTER_HIBERN8			0x00A7
+#define RX_BYPASS_8B10B_ENABLE			0x00A8
+#define RX_TERMINATION_FORCE_ENABLE		0x0089
+
+#define is_mphy_tx_attr(attr)			(attr < RX_MODE)
+/*
  * PHY Adpater attributes
  */
 #define PA_ACTIVETXDATALANES	0x1560
@@ -87,6 +125,24 @@ enum {
 	PA_HS_MODE_B	= 2,
 };
 
+enum ufs_pwm_gear_tag {
+	UFS_PWM_DONT_CHANGE,	/* Don't change Gear */
+	UFS_PWM_G1,		/* PWM Gear 1 (default for reset) */
+	UFS_PWM_G2,		/* PWM Gear 2 */
+	UFS_PWM_G3,		/* PWM Gear 3 */
+	UFS_PWM_G4,		/* PWM Gear 4 */
+	UFS_PWM_G5,		/* PWM Gear 5 */
+	UFS_PWM_G6,		/* PWM Gear 6 */
+	UFS_PWM_G7,		/* PWM Gear 7 */
+};
+
+enum ufs_hs_gear_tag {
+	UFS_HS_DONT_CHANGE,	/* Don't change Gear */
+	UFS_HS_G1,		/* HS Gear 1 (default for reset) */
+	UFS_HS_G2,		/* HS Gear 2 */
+	UFS_HS_G3,		/* HS Gear 3 */
+};
+
 /*
  * Data Link Layer Attributes
  */