scsi: ncr5380: Reduce #include files

The NCR5380 wrapper drivers don't export symbols or declarations and
don't actually need separate header files. Most of these header files
were removed already; only sun3_scsi.h and g_NCR5380.h remain.

Move the remaining definitions to the corresponding .c files to improve
readability and proximity. The #defines which influence the #included
core driver are no longer mixed up with unrelated #defines and #includes.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 0 insertions, 102 deletions

diff --git a/drivers/scsi/sun3_scsi.h b/drivers/scsi/sun3_scsi.h
deleted file mode 100644
index d22745fae328..000000000000
--- a/drivers/scsi/sun3_scsi.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
- *
- * Sun3 DMA additions by Sam Creasey (sammy@sammy.net)
- *
- * Adapted from mac_scsinew.h:
- */
-/*
- * Cumana Generic NCR5380 driver defines
- *
- * Copyright 1993, Drew Eckhardt
- *	Visionary Computing
- *	(Unix and Linux consulting and custom programming)
- *	drew@colorado.edu
- *      +1 (303) 440-4894
- */
-
-#ifndef SUN3_SCSI_H
-#define SUN3_SCSI_H
-
-/* additional registers - mainly DMA control regs */
-/* these start at regbase + 8 -- directly after the NCR regs */
-struct sun3_dma_regs {
-	unsigned short dma_addr_hi; /* vme only */
-	unsigned short dma_addr_lo; /* vme only */
-	unsigned short dma_count_hi; /* vme only */
-	unsigned short dma_count_lo; /* vme only */
-	unsigned short udc_data; /* udc dma data reg (obio only) */
-	unsigned short udc_addr; /* uda dma addr reg (obio only) */
-	unsigned short fifo_data; /* fifo data reg, holds extra byte on
-				     odd dma reads */
-	unsigned short fifo_count; 
-	unsigned short csr; /* control/status reg */
-	unsigned short bpack_hi; /* vme only */
-	unsigned short bpack_lo; /* vme only */
-	unsigned short ivect; /* vme only */
-	unsigned short fifo_count_hi; /* vme only */
-};
-
-/* ucd chip specific regs - live in dvma space */
-struct sun3_udc_regs {
-     unsigned short rsel; /* select regs to load */
-     unsigned short addr_hi; /* high word of addr */
-     unsigned short addr_lo; /* low word */
-     unsigned short count; /* words to be xfer'd */
-     unsigned short mode_hi; /* high word of channel mode */
-     unsigned short mode_lo; /* low word of channel mode */
-};
-
-/* addresses of the udc registers */
-#define UDC_MODE 0x38 
-#define UDC_CSR 0x2e /* command/status */
-#define UDC_CHN_HI 0x26 /* chain high word */
-#define UDC_CHN_LO 0x22 /* chain lo word */
-#define UDC_CURA_HI 0x1a /* cur reg A high */
-#define UDC_CURA_LO 0x0a /* cur reg A low */
-#define UDC_CURB_HI 0x12 /* cur reg B high */
-#define UDC_CURB_LO 0x02 /* cur reg B low */
-#define UDC_MODE_HI 0x56 /* mode reg high */
-#define UDC_MODE_LO 0x52 /* mode reg low */
-#define UDC_COUNT 0x32 /* words to xfer */
-
-/* some udc commands */
-#define UDC_RESET 0
-#define UDC_CHN_START 0xa0 /* start chain */
-#define UDC_INT_ENABLE 0x32 /* channel 1 int on */
-
-/* udc mode words */
-#define UDC_MODE_HIWORD 0x40
-#define UDC_MODE_LSEND 0xc2
-#define UDC_MODE_LRECV 0xd2
-
-/* udc reg selections */
-#define UDC_RSEL_SEND 0x282
-#define UDC_RSEL_RECV 0x182
-
-/* bits in csr reg */
-#define CSR_DMA_ACTIVE 0x8000
-#define CSR_DMA_CONFLICT 0x4000
-#define CSR_DMA_BUSERR 0x2000
-
-#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
-#define CSR_SDB_INT 0x200 /* sbc interrupt pending */
-#define CSR_DMA_INT 0x100 /* dma interrupt pending */
-
-#define CSR_LEFT 0xc0
-#define CSR_LEFT_3 0xc0
-#define CSR_LEFT_2 0x80
-#define CSR_LEFT_1 0x40
-#define CSR_PACK_ENABLE 0x20
-
-#define CSR_DMA_ENABLE 0x10
-
-#define CSR_SEND 0x8 /* 1 = send  0 = recv */
-#define CSR_FIFO 0x2 /* reset fifo */
-#define CSR_INTR 0x4 /* interrupt enable */
-#define CSR_SCSI 0x1 
-
-#define VME_DATA24 0x3d00
-
-#endif /* SUN3_SCSI_H */
-