scsi: qla2xxx: Flush mailbox commands on chip reset

Flush pending mailbox commands on chip reset.  Wake up command that's
waiting for an interrupt and wait for mailbox counters to go to zero.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 46 insertions, 4 deletions

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 17537f0b3b54..10847cdca093 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -110,6 +110,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	unsigned long	wait_time;
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
+	u32 chip_reset;
 
 
 	ql_dbg(ql_dbg_mbx, vha, 0x1000, "Entered %s.\n", __func__);
@@ -140,7 +141,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 	rval = QLA_SUCCESS;
 	abort_active = test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
-
+	chip_reset = ha->chip_reset;
 
 	if (ha->flags.pci_channel_io_perm_failure) {
 		ql_log(ql_log_warn, vha, 0x1003,
@@ -167,6 +168,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
+	atomic_inc(&ha->num_pend_mbx_stage1);
 	/*
 	 * Wait for active mailbox commands to finish by waiting at most tov
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
@@ -177,8 +179,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		ql_log(ql_log_warn, vha, 0xd035,
 		    "Cmd access timeout, cmd=0x%x, Exiting.\n",
 		    mcp->mb[0]);
+		atomic_dec(&ha->num_pend_mbx_stage1);
 		return QLA_FUNCTION_TIMEOUT;
 	}
+	atomic_dec(&ha->num_pend_mbx_stage1);
+	if (ha->flags.purge_mbox || chip_reset != ha->chip_reset) {
+		rval = QLA_ABORTED;
+		goto premature_exit;
+	}
 
 	ha->flags.mbox_busy = 1;
 	/* Save mailbox command for debug */
@@ -189,6 +197,13 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
+	if (ha->flags.purge_mbox || chip_reset != ha->chip_reset) {
+		rval = QLA_ABORTED;
+		ha->flags.mbox_busy = 0;
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+		goto premature_exit;
+	}
+
 	/* Load mailbox registers. */
 	if (IS_P3P_TYPE(ha))
 		optr = (uint16_t __iomem *)&reg->isp82.mailbox_in[0];
@@ -231,7 +246,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	    "jiffies=%lx.\n", jiffies);
 
 	/* Wait for mbx cmd completion until timeout */
-
+	atomic_inc(&ha->num_pend_mbx_stage2);
 	if ((!abort_active && io_lock_on) || IS_NOPOLLING_TYPE(ha)) {
 		set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 
@@ -241,6 +256,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
 				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
 				ql_dbg(ql_dbg_mbx, vha, 0x1010,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -254,6 +270,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 		wait_time = jiffies;
+		atomic_inc(&ha->num_pend_mbx_stage3);
 		if (!wait_for_completion_timeout(&ha->mbx_intr_comp,
 		    mcp->tov * HZ)) {
 			ql_dbg(ql_dbg_mbx, vha, 0x117a,
@@ -261,7 +278,17 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			spin_lock_irqsave(&ha->hardware_lock, flags);
 			clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 			spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+		} else if (ha->flags.purge_mbox ||
+		    chip_reset != ha->chip_reset) {
+			ha->flags.mbox_busy = 0;
+			atomic_dec(&ha->num_pend_mbx_stage2);
+			atomic_dec(&ha->num_pend_mbx_stage3);
+			rval = QLA_ABORTED;
+			goto premature_exit;
 		}
+		atomic_dec(&ha->num_pend_mbx_stage3);
+
 		if (time_after(jiffies, wait_time + 5 * HZ))
 			ql_log(ql_log_warn, vha, 0x1015, "cmd=0x%x, waited %d msecs\n",
 			    command, jiffies_to_msecs(jiffies - wait_time));
@@ -275,6 +302,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
 				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
 				ql_dbg(ql_dbg_mbx, vha, 0x1012,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -289,6 +317,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 		wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */
 		while (!ha->flags.mbox_int) {
+			if (ha->flags.purge_mbox ||
+			    chip_reset != ha->chip_reset) {
+				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
+				rval = QLA_ABORTED;
+				goto premature_exit;
+			}
+
 			if (time_after(jiffies, wait_time))
 				break;
 
@@ -312,6 +348,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		    "Waited %d sec.\n",
 		    (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ));
 	}
+	atomic_dec(&ha->num_pend_mbx_stage2);
 
 	/* Check whether we timed out */
 	if (ha->flags.mbox_int) {
@@ -390,7 +427,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		/* Capture FW dump only, if PCI device active */
 		if (!pci_channel_offline(vha->hw->pdev)) {
 			pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
-			if (w == 0xffff || ictrl == 0xffffffff) {
+			if (w == 0xffff || ictrl == 0xffffffff ||
+			    (chip_reset != ha->chip_reset)) {
 				/* This is special case if there is unload
 				 * of driver happening and if PCI device go
 				 * into bad state due to PCI error condition
@@ -497,7 +535,11 @@ premature_exit:
 	complete(&ha->mbx_cmd_comp);
 
 mbx_done:
-	if (rval) {
+	if (rval == QLA_ABORTED) {
+		ql_log(ql_log_info, vha, 0xd035,
+		    "Chip Reset in progress. Purging Mbox cmd=0x%x.\n",
+		    mcp->mb[0]);
+	} else if (rval) {
 		if (ql2xextended_error_logging & (ql_dbg_disc|ql_dbg_mbx)) {
 			pr_warn("%s [%s]-%04x:%ld: **** Failed", QL_MSGHDR,
 			    dev_name(&ha->pdev->dev), 0x1020+0x800,