Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This includes driver updates from the usual suspects (bfa, arcmsr,
  scsi_dh_alua, lpfc, storvsc, cxlflash).

  The major change is the addition of the hisi_sas driver, which is an
  ARM platform device for SAS.  The other change of note is an enormous
  style transformation to the atp870u driver (which is our worst written
  SCSI driver)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (169 commits)
  cxlflash: Enable device id for future IBM CXL adapter
  cxlflash: Resolve oops in wait_port_offline
  cxlflash: Fix to resolve cmd leak after host reset
  cxlflash: Removed driver date print
  cxlflash: Fix to avoid virtual LUN failover failure
  cxlflash: Fix to escalate LINK_RESET also on port 1
  storvsc: Tighten up the interrupt path
  storvsc: Refactor the code in storvsc_channel_init()
  storvsc: Properly support Fibre Channel devices
  storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
  mvsas: Add SGPIO support to Marvell 94xx
  mpt3sas: A correction in unmap_resources
  hpsa: Add box and bay information for enclosure devices
  hpsa: Change SAS transport devices to bus 0.
  hpsa: fix path_info_show
  cciss: print max outstanding commands as a hex value
  scsi_debug: Increase the reported optimal transfer length
  lpfc: Update version to 11.0.0.10 for upstream patch set
  lpfc: Use kzalloc instead of kmalloc
  lpfc: Delete unnecessary checks before the function call "mempool_destroy"
  ...

1 files changed, 71 insertions, 0 deletions

diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 14e197497b46..578960803a00 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -38,6 +38,10 @@ enum VANIR_REVISION_ID {
 	VANIR_C2_REV		= 0xC2,
 };
 
+enum host_registers {
+	MVS_HST_CHIP_CONFIG	= 0x10104,	/* chip configuration */
+};
+
 enum hw_registers {
 	MVS_GBL_CTL		= 0x04,  /* global control */
 	MVS_GBL_INT_STAT	= 0x00,  /* global irq status */
@@ -239,6 +243,73 @@ struct mvs_prd {
 	__le32			im_len;
 } __attribute__ ((packed));
 
+enum sgpio_registers {
+	MVS_SGPIO_HOST_OFFSET	= 0x100,	/* offset between hosts */
+
+	MVS_SGPIO_CFG0	= 0xc200,
+	MVS_SGPIO_CFG0_ENABLE	= (1 << 0),	/* enable pins */
+	MVS_SGPIO_CFG0_BLINKB	= (1 << 1),	/* blink generators */
+	MVS_SGPIO_CFG0_BLINKA	= (1 << 2),
+	MVS_SGPIO_CFG0_INVSCLK	= (1 << 3),	/* invert signal? */
+	MVS_SGPIO_CFG0_INVSLOAD	= (1 << 4),
+	MVS_SGPIO_CFG0_INVSDOUT	= (1 << 5),
+	MVS_SGPIO_CFG0_SLOAD_FALLEDGE = (1 << 6),	/* rise/fall edge? */
+	MVS_SGPIO_CFG0_SDOUT_FALLEDGE = (1 << 7),
+	MVS_SGPIO_CFG0_SDIN_RISEEDGE = (1 << 8),
+	MVS_SGPIO_CFG0_MAN_BITLEN_SHIFT = 18,	/* bits/frame manual mode */
+	MVS_SGPIO_CFG0_AUT_BITLEN_SHIFT = 24,	/* bits/frame auto mode */
+
+	MVS_SGPIO_CFG1	= 0xc204,	/* blink timing register */
+	MVS_SGPIO_CFG1_LOWA_SHIFT	= 0,	/* A off time */
+	MVS_SGPIO_CFG1_HIA_SHIFT	= 4,	/* A on time */
+	MVS_SGPIO_CFG1_LOWB_SHIFT	= 8,	/* B off time */
+	MVS_SGPIO_CFG1_HIB_SHIFT	= 12,	/* B on time */
+	MVS_SGPIO_CFG1_MAXACTON_SHIFT	= 16,	/* max activity on time */
+
+		/* force activity off time */
+	MVS_SGPIO_CFG1_FORCEACTOFF_SHIFT	= 20,
+		/* stretch activity on time */
+	MVS_SGPIO_CFG1_STRCHACTON_SHIFT	= 24,
+		/* stretch activiity off time */
+	MVS_SGPIO_CFG1_STRCHACTOFF_SHIFT	= 28,
+
+
+	MVS_SGPIO_CFG2	= 0xc208,	/* clock speed register */
+	MVS_SGPIO_CFG2_CLK_SHIFT	= 0,
+	MVS_SGPIO_CFG2_BLINK_SHIFT	= 20,
+
+	MVS_SGPIO_CTRL	= 0xc20c,	/* SDOUT/SDIN mode control */
+	MVS_SGPIO_CTRL_SDOUT_AUTO	= 2,
+	MVS_SGPIO_CTRL_SDOUT_SHIFT	= 2,
+
+	MVS_SGPIO_DSRC	= 0xc220,	/* map ODn bits to drives */
+
+	MVS_SGPIO_DCTRL	= 0xc238,
+	MVS_SGPIO_DCTRL_ERR_SHIFT	= 0,
+	MVS_SGPIO_DCTRL_LOC_SHIFT	= 3,
+	MVS_SGPIO_DCTRL_ACT_SHIFT	= 5,
+};
+
+enum sgpio_led_status {
+	LED_OFF	= 0,
+	LED_ON	= 1,
+	LED_BLINKA	= 2,
+	LED_BLINKA_INV	= 3,
+	LED_BLINKA_SOF	= 4,
+	LED_BLINKA_EOF	= 5,
+	LED_BLINKB	= 6,
+	LED_BLINKB_INV	= 7,
+};
+
+#define DEFAULT_SGPIO_BITS ((LED_BLINKA_SOF << \
+				MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 3) | \
+			(LED_BLINKA_SOF << \
+				MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 2) | \
+			(LED_BLINKA_SOF << \
+				MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 1) | \
+			(LED_BLINKA_SOF << \
+				MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 0))
+
 /*
  * these registers are accessed through port vendor
  * specific address/data registers