summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mpt3sas/mpt3sas_scsih.c
diff options
context:
space:
mode:
authorSreekanth Reddy <sreekanth.reddy@broadcom.com>2019-12-26 06:13:30 -0500
committerMartin K. Petersen <martin.petersen@oracle.com>2020-01-02 22:23:17 -0500
commit5b061980e362820894d7d884370b37005bed23ec (patch)
tree29256b635b6ed82d0074c58740b4efec62e14bb9 /drivers/scsi/mpt3sas/mpt3sas_scsih.c
parentc59777189433621392f6f5c82ecfc62f00a1232d (diff)
downloadlinux-5b061980e362820894d7d884370b37005bed23ec.tar.bz2
scsi: mpt3sas: Optimize mpt3sas driver logging
This improves mpt3sas driver default debug information collection and allows for a higher percentage of issues being able to be resolved with a first-time data capture. However, this improvement to balance the amount of debug data captured with the performance of driver. Enabled below print messages with out affecting the IO performance, 1. When task abort TM is received then print IO commands's timeout value and how much time this command has been outstanding. 2. Whenever hard reset occurs then print from where this hard reset has been issued. 3. Failure message should be displayed for failure scenarios without any logging level. 4. Added a print after driver successfully register or unregistered a target drive with the SML. This print will be useful for debugging the issue where the drive addition or deletion is hanging at SML. 5. During driver load time print request, reply, sense and config page pool's information such as its address, length and size. Also printed sg_tablesize information. Link: https://lore.kernel.org/r/20191226111333.26131-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_scsih.c')
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_scsih.c42
1 files changed, 26 insertions, 16 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 4fb687280939..0960e25c34dd 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -1604,7 +1604,12 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
max_depth = 1;
if (qdepth > max_depth)
qdepth = max_depth;
- return scsi_change_queue_depth(sdev, qdepth);
+ scsi_change_queue_depth(sdev, qdepth);
+ sdev_printk(KERN_INFO, sdev,
+ "qdepth(%d), tagged(%d), scsi_level(%d), cmd_que(%d)\n",
+ sdev->queue_depth, sdev->tagged_supported,
+ sdev->scsi_level, ((sdev->inquiry[7] & 2) >> 1));
+ return sdev->queue_depth;
}
/**
@@ -2931,15 +2936,17 @@ scsih_abort(struct scsi_cmnd *scmd)
u8 timeout = 30;
struct _pcie_device *pcie_device = NULL;
- sdev_printk(KERN_INFO, scmd->device,
- "attempting task abort! scmd(%p)\n", scmd);
+ sdev_printk(KERN_INFO, scmd->device, "attempting task abort!"
+ "scmd(0x%p), outstanding for %u ms & timeout %u ms\n",
+ scmd, jiffies_to_msecs(jiffies - scmd->jiffies_at_alloc),
+ (scmd->request->timeout / HZ) * 1000);
_scsih_tm_display_info(ioc, scmd);
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
ioc->remove_host) {
sdev_printk(KERN_INFO, scmd->device,
- "device been deleted! scmd(%p)\n", scmd);
+ "device been deleted! scmd(0x%p)\n", scmd);
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
r = SUCCESS;
@@ -2948,6 +2955,8 @@ scsih_abort(struct scsi_cmnd *scmd)
/* check for completed command */
if (st == NULL || st->cb_idx == 0xFF) {
+ sdev_printk(KERN_INFO, scmd->device, "No reference found at "
+ "driver, assuming scmd(0x%p) might have completed\n", scmd);
scmd->result = DID_RESET << 16;
r = SUCCESS;
goto out;
@@ -2976,7 +2985,7 @@ scsih_abort(struct scsi_cmnd *scmd)
if (r == SUCCESS && st->cb_idx != 0xFF)
r = FAILED;
out:
- sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
+ sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(0x%p)\n",
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
if (pcie_device)
pcie_device_put(pcie_device);
@@ -3005,14 +3014,14 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
sdev_printk(KERN_INFO, scmd->device,
- "attempting device reset! scmd(%p)\n", scmd);
+ "attempting device reset! scmd(0x%p)\n", scmd);
_scsih_tm_display_info(ioc, scmd);
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
ioc->remove_host) {
sdev_printk(KERN_INFO, scmd->device,
- "device been deleted! scmd(%p)\n", scmd);
+ "device been deleted! scmd(0x%p)\n", scmd);
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
r = SUCCESS;
@@ -3052,7 +3061,7 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
if (r == SUCCESS && atomic_read(&scmd->device->device_busy))
r = FAILED;
out:
- sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
+ sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(0x%p)\n",
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
if (sas_device)
@@ -3083,15 +3092,15 @@ scsih_target_reset(struct scsi_cmnd *scmd)
struct scsi_target *starget = scmd->device->sdev_target;
struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
- starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n",
- scmd);
+ starget_printk(KERN_INFO, starget,
+ "attempting target reset! scmd(0x%p)\n", scmd);
_scsih_tm_display_info(ioc, scmd);
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
ioc->remove_host) {
- starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n",
- scmd);
+ starget_printk(KERN_INFO, starget,
+ "target been deleted! scmd(0x%p)\n", scmd);
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
r = SUCCESS;
@@ -3130,7 +3139,7 @@ scsih_target_reset(struct scsi_cmnd *scmd)
if (r == SUCCESS && atomic_read(&starget->target_busy))
r = FAILED;
out:
- starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
+ starget_printk(KERN_INFO, starget, "target reset: %s scmd(0x%p)\n",
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
if (sas_device)
@@ -3153,7 +3162,7 @@ scsih_host_reset(struct scsi_cmnd *scmd)
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
int r, retval;
- ioc_info(ioc, "attempting host reset! scmd(%p)\n", scmd);
+ ioc_info(ioc, "attempting host reset! scmd(0x%p)\n", scmd);
scsi_print_command(scmd);
if (ioc->is_driver_loading || ioc->remove_host) {
@@ -3165,7 +3174,7 @@ scsih_host_reset(struct scsi_cmnd *scmd)
retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
r = (retval < 0) ? FAILED : SUCCESS;
out:
- ioc_info(ioc, "host reset: %s scmd(%p)\n",
+ ioc_info(ioc, "host reset: %s scmd(0x%p)\n",
r == SUCCESS ? "SUCCESS" : "FAILED", scmd);
return r;
@@ -10870,7 +10879,7 @@ scsih_resume(struct pci_dev *pdev)
r = mpt3sas_base_map_resources(ioc);
if (r)
return r;
-
+ ioc_info(ioc, "Issuing Hard Reset as part of OS Resume\n");
mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET);
scsi_unblock_requests(shost);
mpt3sas_base_start_watchdog(ioc);
@@ -10939,6 +10948,7 @@ scsih_pci_slot_reset(struct pci_dev *pdev)
if (rc)
return PCI_ERS_RESULT_DISCONNECT;
+ ioc_info(ioc, "Issuing Hard Reset as part of PCI Slot Reset\n");
rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
ioc_warn(ioc, "hard reset: %s\n",