diff options
| author | Finn Thain <fthain@telegraphics.com.au> | 2018-10-16 16:31:25 +1100 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2018-10-17 21:34:20 -0400 |
| commit | fd47d919d0c336e7c22862b51ee94927ffea227a (patch) | |
| tree | 08caf71e10f8c000181ab8fe75fe1aac97f316f3 /drivers/scsi/mac_esp.c | |
| parent | b7ded0e8b0d11b6df1c4e5aa23a26e6629c21985 (diff) | |
| download | linux-fd47d919d0c336e7c22862b51ee94927ffea227a.tar.bz2 | |
scsi: esp_scsi: Track residual for PIO transfers
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:
scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]
The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.
The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.
Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/mac_esp.c')
| -rw-r--r-- | drivers/scsi/mac_esp.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c index 2769df5acc07..c92b6c1e02ee 100644 --- a/drivers/scsi/mac_esp.c +++ b/drivers/scsi/mac_esp.c @@ -394,6 +394,8 @@ static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count, scsi_esp_cmd(esp, ESP_CMD_TI); } } + + esp->send_cmd_residual = esp_count; } static int mac_esp_irq_pending(struct esp *esp) |