summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-14 19:49:48 -0500
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-14 19:49:48 -0500
commitabf04af74a9f27a65172a43b43ccabcbc2bbdc39 (patch)
treea9336a3797f8f6c445b1439278f558310ceae56a /drivers/scsi/lpfc
parent16d52ef7c026f925893a1c0fc46516349928f319 (diff)
parentc7ee3bd4870ef1d96a1202f92ce858f849670a62 (diff)
downloadlinux-abf04af74a9f27a65172a43b43ccabcbc2bbdc39.tar.bz2
Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley: "This is just a couple of drivers (hpsa and lpfc) that got left out for further testing in linux-next. We also have one fix to a prior submission (qla2xxx sparse)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch lpfc: Update lpfc version to driver version 10.2.8001.0 lpfc: Fix ExpressLane priority setup lpfc: mark old devices as obsolete lpfc: Fix for initializing RRQ bitmap lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries lpfc: Update lpfc version to driver version 10.2.8000.0 lpfc: Update Copyright on changed files from 8.3.45 patches lpfc: Update Copyright on changed files lpfc: Fixed locking for scsi task management commands lpfc: Convert runtime references to old xlane cfg param to fof cfg param lpfc: Fix FW dump using sysfs lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock lpfc: Fixed kernel panic in lpfc_abort_handler lpfc: Fix locking for postbufq when freeing lpfc: Fix locking for lpfc_hba_down_post lpfc: Fix dynamic transitions of FirstBurst from on to off hpsa: fix handling of hpsa_volume_offline return value hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id hpsa: remove messages about volume status VPD inquiry page not supported ...
Diffstat (limited to 'drivers/scsi/lpfc')
-rw-r--r--drivers/scsi/lpfc/lpfc.h3
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c23
-rw-r--r--drivers/scsi/lpfc/lpfc_bsg.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_bsg.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h6
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c5
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c258
-rw-r--r--drivers/scsi/lpfc/lpfc_mem.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c60
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c297
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli4.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h6
18 files changed, 490 insertions, 190 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 94a3cafe7197..434e9037908e 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -640,6 +640,7 @@ struct lpfc_hba {
#define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */
#define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */
#define HBA_FCP_IOQ_FLUSH 0x8000 /* FCP I/O queues being flushed */
+#define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */
uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
struct lpfc_dmabuf slim2p;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 8d5b6ceec9c9..1d7a5c34ee8c 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -919,10 +919,15 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
phba->cfg_sriov_nr_virtfn = 0;
}
+ if (opcode == LPFC_FW_DUMP)
+ phba->hba_flag |= HBA_FW_DUMP_OP;
+
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
- if (status != 0)
+ if (status != 0) {
+ phba->hba_flag &= ~HBA_FW_DUMP_OP;
return status;
+ }
/* wait for the device to be quiesced before firmware reset */
msleep(100);
@@ -2364,7 +2369,7 @@ lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr,
uint8_t wwpn[WWN_SZ];
int rc;
- if (!phba->cfg_EnableXLane)
+ if (!phba->cfg_fof)
return -EPERM;
/* count may include a LF at end of string */
@@ -2432,7 +2437,7 @@ lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr,
uint8_t wwpn[WWN_SZ];
int rc;
- if (!phba->cfg_EnableXLane)
+ if (!phba->cfg_fof)
return -EPERM;
/* count may include a LF at end of string */
@@ -2499,7 +2504,7 @@ lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr,
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
int val = 0;
- if (!phba->cfg_EnableXLane)
+ if (!phba->cfg_fof)
return -EPERM;
if (!isdigit(buf[0]))
@@ -2565,7 +2570,7 @@ lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
int rc = 0;
- if (!phba->cfg_EnableXLane)
+ if (!phba->cfg_fof)
return -EPERM;
if (oas_state) {
@@ -2670,7 +2675,7 @@ lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr,
uint64_t oas_lun;
int len = 0;
- if (!phba->cfg_EnableXLane)
+ if (!phba->cfg_fof)
return -EPERM;
if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
@@ -2716,7 +2721,7 @@ lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr,
uint64_t scsi_lun;
ssize_t rc;
- if (!phba->cfg_EnableXLane)
+ if (!phba->cfg_fof)
return -EPERM;
if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
@@ -4655,7 +4660,7 @@ LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature.");
# 0x0 - 0x7f = CS_CTL field in FC header (high 7 bits)
# Value range is [0x0,0x7f]. Default value is 0
*/
-LPFC_ATTR_R(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
+LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
/*
# lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index ca2f4ea7cdef..5b5c825d9576 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2009-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2009-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h
index a94d4c9dfaa5..928ef609f363 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.h
+++ b/drivers/scsi/lpfc/lpfc_bsg.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2010-2012 Emulex. All rights reserved. *
+ * Copyright (C) 2010-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index adda0bf7a244..db5604f01a1a 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -289,6 +289,7 @@ int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
void lpfc_sli_bemem_bcopy(void *, void *, uint32_t);
void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
+void lpfc_sli_abort_fcp_rings(struct lpfc_hba *phba);
void lpfc_sli_hba_iocb_abort(struct lpfc_hba *);
void lpfc_sli_flush_fcp_rings(struct lpfc_hba *);
int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *,
@@ -310,6 +311,9 @@ int lpfc_sli_issue_abort_iotag(struct lpfc_hba *, struct lpfc_sli_ring *,
int lpfc_sli_sum_iocb(struct lpfc_vport *, uint16_t, uint64_t, lpfc_ctx_cmd);
int lpfc_sli_abort_iocb(struct lpfc_vport *, struct lpfc_sli_ring *, uint16_t,
uint64_t, lpfc_ctx_cmd);
+int
+lpfc_sli_abort_taskmgmt(struct lpfc_vport *, struct lpfc_sli_ring *,
+ uint16_t, uint64_t, lpfc_ctx_cmd);
void lpfc_mbox_timeout(unsigned long);
void lpfc_mbox_timeout_handler(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 828c08e9389e..b0aedce3f54b 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2007-2012 Emulex. All rights reserved. *
+ * Copyright (C) 2007-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -2314,7 +2314,7 @@ proc_cq:
goto too_big;
}
- if (phba->cfg_EnableXLane) {
+ if (phba->cfg_fof) {
/* OAS CQ */
qp = phba->sli4_hba.oas_cq;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 624fe0b3cc0b..7a5d81a65be8 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 294c072e9083..2a17e31265b8 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -5634,6 +5634,9 @@ lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->active_rrqs_xri_bitmap =
mempool_alloc(vport->phba->active_rrq_pool,
GFP_KERNEL);
+ if (ndlp->active_rrqs_xri_bitmap)
+ memset(ndlp->active_rrqs_xri_bitmap, 0,
+ ndlp->phba->cfg_rrq_xri_bitmap_sz);
}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 3d9438ce59ab..236259252379 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index fd79f7de7666..f432ec180cf8 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2009-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2009-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 635eeb3d6987..06f9a5b79e66 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -820,57 +820,153 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
}
/**
- * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
+ * lpfc_sli4_free_sp_events - Cleanup sp_queue_events to free
+ * rspiocb which got deferred
+ *
* @phba: pointer to lpfc HBA data structure.
*
- * This routine will do uninitialization after the HBA is reset when bring
- * down the SLI Layer.
+ * This routine will cleanup completed slow path events after HBA is reset
+ * when bringing down the SLI Layer.
+ *
*
* Return codes
- * 0 - success.
- * Any other value - error.
+ * void.
**/
-static int
-lpfc_hba_down_post_s3(struct lpfc_hba *phba)
+static void
+lpfc_sli4_free_sp_events(struct lpfc_hba *phba)
+{
+ struct lpfc_iocbq *rspiocbq;
+ struct hbq_dmabuf *dmabuf;
+ struct lpfc_cq_event *cq_event;
+
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
+ spin_unlock_irq(&phba->hbalock);
+
+ while (!list_empty(&phba->sli4_hba.sp_queue_event)) {
+ /* Get the response iocb from the head of work queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_queue_event,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+
+ switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) {
+ case CQE_CODE_COMPL_WQE:
+ rspiocbq = container_of(cq_event, struct lpfc_iocbq,
+ cq_event);
+ lpfc_sli_release_iocbq(phba, rspiocbq);
+ break;
+ case CQE_CODE_RECEIVE:
+ case CQE_CODE_RECEIVE_V1:
+ dmabuf = container_of(cq_event, struct hbq_dmabuf,
+ cq_event);
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ }
+ }
+}
+
+/**
+ * lpfc_hba_free_post_buf - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will cleanup posted ELS buffers after the HBA is reset
+ * when bringing down the SLI Layer.
+ *
+ *
+ * Return codes
+ * void.
+ **/
+static void
+lpfc_hba_free_post_buf(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *mp, *next_mp;
- LIST_HEAD(completions);
- int i;
+ LIST_HEAD(buflist);
+ int count;
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
lpfc_sli_hbqbuf_free_all(phba);
else {
/* Cleanup preposted buffers on the ELS ring */
pring = &psli->ring[LPFC_ELS_RING];
- list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
+ spin_lock_irq(&phba->hbalock);
+ list_splice_init(&pring->postbufq, &buflist);
+ spin_unlock_irq(&phba->hbalock);
+
+ count = 0;
+ list_for_each_entry_safe(mp, next_mp, &buflist, list) {
list_del(&mp->list);
- pring->postbufq_cnt--;
+ count++;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
}
+
+ spin_lock_irq(&phba->hbalock);
+ pring->postbufq_cnt -= count;
+ spin_unlock_irq(&phba->hbalock);
}
+}
+
+/**
+ * lpfc_hba_clean_txcmplq - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will cleanup the txcmplq after the HBA is reset when bringing
+ * down the SLI Layer.
+ *
+ * Return codes
+ * void
+ **/
+static void
+lpfc_hba_clean_txcmplq(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring;
+ LIST_HEAD(completions);
+ int i;
- spin_lock_irq(&phba->hbalock);
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
-
+ if (phba->sli_rev >= LPFC_SLI_REV4)
+ spin_lock_irq(&pring->ring_lock);
+ else
+ spin_lock_irq(&phba->hbalock);
/* At this point in time the HBA is either reset or DOA. Either
* way, nothing should be on txcmplq as it will NEVER complete.
*/
list_splice_init(&pring->txcmplq, &completions);
- spin_unlock_irq(&phba->hbalock);
+ pring->txcmplq_cnt = 0;
+
+ if (phba->sli_rev >= LPFC_SLI_REV4)
+ spin_unlock_irq(&pring->ring_lock);
+ else
+ spin_unlock_irq(&phba->hbalock);
/* Cancel all the IOCBs from the completions list */
lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
IOERR_SLI_ABORTED);
-
lpfc_sli_abort_iocb_ring(phba, pring);
- spin_lock_irq(&phba->hbalock);
}
- spin_unlock_irq(&phba->hbalock);
+}
+/**
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
+ int i;
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ * 0 - success.
+ * Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
+{
+ lpfc_hba_free_post_buf(phba);
+ lpfc_hba_clean_txcmplq(phba);
return 0;
}
@@ -890,13 +986,12 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
{
struct lpfc_scsi_buf *psb, *psb_next;
LIST_HEAD(aborts);
- int ret;
unsigned long iflag = 0;
struct lpfc_sglq *sglq_entry = NULL;
- ret = lpfc_hba_down_post_s3(phba);
- if (ret)
- return ret;
+ lpfc_hba_free_post_buf(phba);
+ lpfc_hba_clean_txcmplq(phba);
+
/* At this point in time the HBA is either reset or DOA. Either
* way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
* on the lpfc_sgl_list so that it can either be freed if the
@@ -932,6 +1027,8 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
list_splice(&aborts, &phba->lpfc_scsi_buf_list_put);
spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
+
+ lpfc_sli4_free_sp_events(phba);
return 0;
}
@@ -1250,7 +1347,6 @@ static void
lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
{
uint32_t old_host_status = phba->work_hs;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli = &phba->sli;
/* If the pci channel is offline, ignore possible errors,
@@ -1279,8 +1375,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
* dropped by the firmware. Error iocb (I/O) on txcmplq and let the
* SCSI layer retry it after re-establishing link.
*/
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
+ lpfc_sli_abort_fcp_rings(phba);
/*
* There was a firmware error. Take the hba offline and then
@@ -1348,7 +1443,6 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
uint32_t event_data;
unsigned long temperature;
struct temp_event temp_event_data;
@@ -1400,8 +1494,7 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba)
* Error iocb (I/O) on txcmplq and let the SCSI layer
* retry it after re-establishing link.
*/
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
+ lpfc_sli_abort_fcp_rings(phba);
/*
* There was a firmware error. Take the hba offline and then
@@ -1940,78 +2033,81 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
switch (dev_id) {
case PCI_DEVICE_ID_FIREFLY:
- m = (typeof(m)){"LP6000", "PCI", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP6000", "PCI",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
- m = (typeof(m)){"LP7000", "PCI",
- "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP7000", "PCI", ""};
else
- m = (typeof(m)){"LP7000E", "PCI",
- "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP7000E", "PCI", ""};
+ m.function = "Obsolete, Unsupported Fibre Channel Adapter";
break;
case PCI_DEVICE_ID_DRAGONFLY:
m = (typeof(m)){"LP8000", "PCI",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_CENTAUR:
if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
- m = (typeof(m)){"LP9002", "PCI",
- "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP9002", "PCI", ""};
else
- m = (typeof(m)){"LP9000", "PCI",
- "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP9000", "PCI", ""};
+ m.function = "Obsolete, Unsupported Fibre Channel Adapter";
break;
case PCI_DEVICE_ID_RFLY:
m = (typeof(m)){"LP952", "PCI",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PEGASUS:
m = (typeof(m)){"LP9802", "PCI-X",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_THOR:
m = (typeof(m)){"LP10000", "PCI-X",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_VIPER:
m = (typeof(m)){"LPX1000", "PCI-X",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PFLY:
m = (typeof(m)){"LP982", "PCI-X",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TFLY:
m = (typeof(m)){"LP1050", "PCI-X",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS:
m = (typeof(m)){"LP11000", "PCI-X2",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_SCSP:
m = (typeof(m)){"LP11000-SP", "PCI-X2",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_DCSP:
m = (typeof(m)){"LP11002-SP", "PCI-X2",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE:
- m = (typeof(m)){"LPe1000", "PCIe", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LPe1000", "PCIe",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_SCSP:
- m = (typeof(m)){"LPe1000-SP", "PCIe", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LPe1000-SP", "PCIe",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_DCSP:
- m = (typeof(m)){"LPe1002-SP", "PCIe", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LPe1002-SP", "PCIe",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BMID:
m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BSMB:
- m = (typeof(m)){"LP111", "PCI-X2", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP111", "PCI-X2",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR:
m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
@@ -2030,16 +2126,20 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP101:
- m = (typeof(m)){"LP101", "PCI-X", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP101", "PCI-X",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP10000S:
- m = (typeof(m)){"LP10000-S", "PCI", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP10000-S", "PCI",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP11000S:
- m = (typeof(m)){"LP11000-S", "PCI-X2", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LP11000-S", "PCI-X2",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LPE11000S:
- m = (typeof(m)){"LPe11000-S", "PCIe", "Fibre Channel Adapter"};
+ m = (typeof(m)){"LPe11000-S", "PCIe",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT:
m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
@@ -2060,20 +2160,21 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HORNET:
- m = (typeof(m)){"LP21000", "PCIe", "FCoE Adapter"};
+ m = (typeof(m)){"LP21000", "PCIe",
+ "Obsolete, Unsupported FCoE Adapter"};
GE = 1;
break;
case PCI_DEVICE_ID_PROTEUS_VF:
m = (typeof(m)){"LPev12000", "PCIe IOV",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_PF:
m = (typeof(m)){"LPev12000", "PCIe IOV",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_S:
m = (typeof(m)){"LPemv12002-S", "PCIe IOV",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TIGERSHARK:
oneConnect = 1;
@@ -2089,17 +2190,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
break;
case PCI_DEVICE_ID_BALIUS:
m = (typeof(m)){"LPVe12002", "PCIe Shared I/O",
- "Fibre Channel Adapter"};
+ "Obsolete, Unsupported Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LANCER_FC:
- case PCI_DEVICE_ID_LANCER_FC_VF:
m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"};
break;
+ case PCI_DEVICE_ID_LANCER_FC_VF:
+ m = (typeof(m)){"LPe16000", "PCIe",
+ "Obsolete, Unsupported Fibre Channel Adapter"};
+ break;
case PCI_DEVICE_ID_LANCER_FCOE:
- case PCI_DEVICE_ID_LANCER_FCOE_VF:
oneConnect = 1;
m = (typeof(m)){"OCe15100", "PCIe", "FCoE"};
break;
+ case PCI_DEVICE_ID_LANCER_FCOE_VF:
+ oneConnect = 1;
+ m = (typeof(m)){"OCe15100", "PCIe",
+ "Obsolete, Unsupported FCoE"};
+ break;
case PCI_DEVICE_ID_SKYHAWK:
case PCI_DEVICE_ID_SKYHAWK_VF:
oneConnect = 1;
@@ -4614,7 +4722,10 @@ lpfc_reset_hba(struct lpfc_hba *phba)
phba->link_state = LPFC_HBA_ERROR;
return;
}
- lpfc_offline_prep(phba, LPFC_MBX_WAIT);
+ if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
+ lpfc_offline_prep(phba, LPFC_MBX_WAIT);
+ else
+ lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
lpfc_online(phba);
@@ -9663,9 +9774,6 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
static void
lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
-
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2723 PCI channel I/O abort preparing for recovery\n");
@@ -9673,8 +9781,7 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
* There may be errored I/Os through HBA, abort all I/Os on txcmplq
* and let the SCSI mid-layer to retry them to recover.
*/
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
+ lpfc_sli_abort_fcp_rings(phba);
}
/**
@@ -10417,17 +10524,13 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
static void
lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
-
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2828 PCI channel I/O abort preparing for recovery\n");
/*
* There may be errored I/Os through HBA, abort all I/Os on txcmplq
* and let the SCSI mid-layer to retry them to recover.
*/
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
+ lpfc_sli_abort_fcp_rings(phba);
}
/**
@@ -10898,7 +11001,7 @@ lpfc_sli4_oas_verify(struct lpfc_hba *phba)
if (phba->sli4_hba.pc_sli4_params.oas_supported) {
phba->cfg_fof = 1;
} else {
- phba->cfg_EnableXLane = 0;
+ phba->cfg_fof = 0;
if (phba->device_data_mem_pool)
mempool_destroy(phba->device_data_mem_pool);
phba->device_data_mem_pool = NULL;
@@ -10928,7 +11031,7 @@ lpfc_fof_queue_setup(struct lpfc_hba *phba)
if (rc)
return -ENOMEM;
- if (phba->cfg_EnableXLane) {
+ if (phba->cfg_fof) {
rc = lpfc_cq_create(phba, phba->sli4_hba.oas_cq,
phba->sli4_hba.fof_eq, LPFC_WCQ, LPFC_FCP);
@@ -10947,8 +11050,7 @@ lpfc_fof_queue_setup(struct lpfc_hba *phba)
return 0;
out_oas_wq:
- if (phba->cfg_EnableXLane)
- lpfc_cq_destroy(phba, phba->sli4_hba.oas_cq);
+ lpfc_cq_destroy(phba, phba->sli4_hba.oas_cq);
out_oas_cq:
lpfc_eq_destroy(phba, phba->sli4_hba.fof_eq);
return rc;
@@ -10982,7 +11084,7 @@ lpfc_fof_queue_create(struct lpfc_hba *phba)
phba->sli4_hba.fof_eq = qdesc;
- if (phba->cfg_EnableXLane) {
+ if (phba->cfg_fof) {
/* Create OAS CQ */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index ed419aad2b1f..3fa65338d3f5 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2012 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 462453ee0bda..2df11daad85b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -73,7 +73,7 @@ lpfc_rport_data_from_scsi_device(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *)sdev->host->hostdata;
- if (vport->phba->cfg_EnableXLane)
+ if (vport->phba->cfg_fof)
return ((struct lpfc_device_data *)sdev->hostdata)->rport_data;
else
return (struct lpfc_rport_data *)sdev->hostdata;
@@ -3462,7 +3462,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
* If the OAS driver feature is enabled and the lun is enabled for
* OAS, set the oas iocb related flags.
*/
- if ((phba->cfg_EnableXLane) && ((struct lpfc_device_data *)
+ if ((phba->cfg_fof) && ((struct lpfc_device_data *)
scsi_cmnd->device->hostdata)->oas_enabled)
lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_OAS;
return 0;
@@ -4314,6 +4314,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
fcp_cmnd->fcpCntl1 = SIMPLE_Q;
sli4 = (phba->sli_rev == LPFC_SLI_REV4);
+ piocbq->iocb.un.fcpi.fcpi_XRdy = 0;
/*
* There are three possibilities here - use scatter-gather segment, use
@@ -4782,7 +4783,9 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
struct lpfc_scsi_buf *lpfc_cmd;
IOCB_t *cmd, *icmd;
int ret = SUCCESS, status = 0;
- unsigned long flags;
+ struct lpfc_sli_ring *pring_s4;
+ int ring_number, ret_val;
+ unsigned long flags, iflags;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
status = fc_block_scsi_eh(cmnd);
@@ -4833,6 +4836,14 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
BUG_ON(iocb->context1 != lpfc_cmd);
+ /* abort issued in recovery is still in progress */
+ if (iocb->iocb_flag & LPFC_DRIVER_ABORTED) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "3389 SCSI Layer I/O Abort Request is pending\n");
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto wait_for_cmpl;
+ }
+
abtsiocb = __lpfc_sli_get_iocbq(phba);
if (abtsiocb == NULL) {
ret = FAILED;
@@ -4871,11 +4882,23 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
abtsiocb->vport = vport;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ ring_number = MAX_SLI3_CONFIGURED_RINGS + iocb->fcp_wqidx;
+ pring_s4 = &phba->sli.ring[ring_number];
+ /* Note: both hbalock and ring_lock must be set here */
+ spin_lock_irqsave(&pring_s4->ring_lock, iflags);
+ ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
+ abtsiocb, 0);
+ spin_unlock_irqrestore(&pring_s4->ring_lock, iflags);
+ } else {
+ ret_val = __lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
+ abtsiocb, 0);
+ }
/* no longer need the lock after this point */
spin_unlock_irqrestore(&phba->hbalock, flags);
- if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
- IOCB_ERROR) {
+
+ if (ret_val == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
ret = FAILED;
goto out;
@@ -4885,12 +4908,16 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
lpfc_sli_handle_fast_ring_event(phba,
&phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
+wait_for_cmpl:
lpfc_cmd->waitq = &waitq;
/* Wait for abort to complete */
wait_event_timeout(waitq,
(lpfc_cmd->pCmd != cmnd),
msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
+
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->waitq = NULL;
+ spin_unlock_irqrestore(shost->host_lock, flags);
if (lpfc_cmd->pCmd == cmnd) {
ret = FAILED;
@@ -5172,8 +5199,9 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
if (cnt)
- lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
- tgt_id, lun_id, context);
+ lpfc_sli_abort_taskmgmt(vport,
+ &phba->sli.ring[phba->sli.fcp_ring],
+ tgt_id, lun_id, context);
later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
while (time_after(later, jiffies) && cnt) {
schedule_timeout_uninterruptible(msecs_to_jiffies(20));
@@ -5491,7 +5519,7 @@ lpfc_slave_alloc(struct scsi_device *sdev)
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
- if (phba->cfg_EnableXLane) {
+ if (phba->cfg_fof) {
/*
* Check to see if the device data structure for the lun
@@ -5616,7 +5644,7 @@ lpfc_slave_destroy(struct scsi_device *sdev)
struct lpfc_device_data *device_data = sdev->hostdata;
atomic_dec(&phba->sdev_cnt);
- if ((phba->cfg_EnableXLane) && (device_data)) {
+ if ((phba->cfg_fof) && (device_data)) {
spin_lock_irqsave(&phba->devicelock, flags);
device_data->available = false;
if (!device_data->oas_enabled)
@@ -5655,7 +5683,7 @@ lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
int memory_flags;
if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
- !(phba->cfg_EnableXLane))
+ !(phba->cfg_fof))
return NULL;
/* Attempt to create the device data to contain lun info */
@@ -5693,7 +5721,7 @@ lpfc_delete_device_data(struct lpfc_hba *phba,
{
if (unlikely(!phba) || !lun_info ||
- !(phba->cfg_EnableXLane))
+ !(phba->cfg_fof))
return;
if (!list_empty(&lun_info->listentry))
@@ -5727,7 +5755,7 @@ __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
struct lpfc_device_data *lun_info;
if (unlikely(!phba) || !list || !vport_wwpn || !target_wwpn ||
- !phba->cfg_EnableXLane)
+ !phba->cfg_fof)
return NULL;
/* Check to see if the lun is already enabled for OAS. */
@@ -5789,7 +5817,7 @@ lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
!starting_lun || !found_vport_wwpn ||
!found_target_wwpn || !found_lun || !found_lun_status ||
(*starting_lun == NO_MORE_OAS_LUN) ||
- !phba->cfg_EnableXLane)
+ !phba->cfg_fof)
return false;
lun = *starting_lun;
@@ -5873,7 +5901,7 @@ lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
unsigned long flags;
if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
- !phba->cfg_EnableXLane)
+ !phba->cfg_fof)
return false;
spin_lock_irqsave(&phba->devicelock, flags);
@@ -5930,7 +5958,7 @@ lpfc_disable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
unsigned long flags;
if (unlikely(!phba) || !vport_wwpn || !target_wwpn ||
- !phba->cfg_EnableXLane)
+ !phba->cfg_fof)
return false;
spin_lock_irqsave(&phba->devicelock, flags);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 0120bfccf50b..0389ac1e7b83 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 393662c24df5..32ada0505576 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -3532,14 +3532,27 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
/* Error everything on txq and txcmplq
* First do the txq.
*/
- spin_lock_irq(&phba->hbalock);
- list_splice_init(&pring->txq, &completions);
+ if (phba->sli_rev >= LPFC_SLI_REV4) {
+ spin_lock_irq(&pring->ring_lock);
+ list_splice_init(&pring->txq, &completions);
+ pring->txq_cnt = 0;
+ spin_unlock_irq(&pring->ring_lock);
- /* Next issue ABTS for everything on the txcmplq */
- list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
- lpfc_sli_issue_abort_iotag(phba, pring, iocb);
+ spin_lock_irq(&phba->hbalock);
+ /* Next issue ABTS for everything on the txcmplq */
+ list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
+ lpfc_sli_issue_abort_iotag(phba, pring, iocb);
+ spin_unlock_irq(&phba->hbalock);
+ } else {
+ spin_lock_irq(&phba->hbalock);
+ list_splice_init(&pring->txq, &completions);
+ pring->txq_cnt = 0;
- spin_unlock_irq(&phba->hbalock);
+ /* Next issue ABTS for everything on the txcmplq */
+ list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
+ lpfc_sli_issue_abort_iotag(phba, pring, iocb);
+ spin_unlock_irq(&phba->hbalock);
+ }
/* Cancel all the IOCBs from the completions list */
lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
@@ -3547,6 +3560,36 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
+ * lpfc_sli_abort_fcp_rings - Abort all iocbs in all FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function aborts all iocbs in FCP rings and frees all the iocb
+ * objects in txq. This function issues an abort iocb for all the iocb commands
+ * in txcmplq. The iocbs in the txcmplq is not guaranteed to complete before
+ * the return of this function. The caller is not required to hold any locks.
+ **/
+void
+lpfc_sli_abort_fcp_rings(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring;
+ uint32_t i;
+
+ /* Look on all the FCP Rings for the iotag */
+ if (phba->sli_rev >= LPFC_SLI_REV4) {
+ for (i = 0; i < phba->cfg_fcp_io_channel; i++) {
+ pring = &psli->ring[i + MAX_SLI3_CONFIGURED_RINGS];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+ }
+ } else {
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+ }
+}
+
+
+/**
* lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring
* @phba: Pointer to HBA context object.
*
@@ -3563,28 +3606,55 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
LIST_HEAD(txcmplq);
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
-
- /* Currently, only one fcp ring */
- pring = &psli->ring[psli->fcp_ring];
+ uint32_t i;
spin_lock_irq(&phba->hbalock);
- /* Retrieve everything on txq */
- list_splice_init(&pring->txq, &txq);
-
- /* Retrieve everything on the txcmplq */
- list_splice_init(&pring->txcmplq, &txcmplq);
-
/* Indicate the I/O queues are flushed */
phba->hba_flag |= HBA_FCP_IOQ_FLUSH;
spin_unlock_irq(&phba->hbalock);
- /* Flush the txq */
- lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
- IOERR_SLI_DOWN);
+ /* Look on all the FCP Rings for the iotag */
+ if (phba->sli_rev >= LPFC_SLI_REV4) {
+ for (i = 0; i < phba->cfg_fcp_io_channel; i++) {
+ pring = &psli->ring[i + MAX_SLI3_CONFIGURED_RINGS];
+
+ spin_lock_irq(&pring->ring_lock);
+ /* Retrieve everything on txq */
+ list_splice_init(&pring->txq, &txq);
+ /* Retrieve everything on the txcmplq */
+ list_splice_init(&pring->txcmplq, &txcmplq);
+ pring->txq_cnt = 0;
+ pring->txcmplq_cnt = 0;
+ spin_unlock_irq(&pring->ring_lock);
+
+ /* Flush the txq */
+ lpfc_sli_cancel_iocbs(phba, &txq,
+ IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
+ /* Flush the txcmpq */
+ lpfc_sli_cancel_iocbs(phba, &txcmplq,
+ IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
+ }
+ } else {
+ pring = &psli->ring[psli->fcp_ring];
- /* Flush the txcmpq */
- lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
- IOERR_SLI_DOWN);
+ spin_lock_irq(&phba->hbalock);
+ /* Retrieve everything on txq */
+ list_splice_init(&pring->txq, &txq);
+ /* Retrieve everything on the txcmplq */
+ list_splice_init(&pring->txcmplq, &txcmplq);
+ pring->txq_cnt = 0;
+ pring->txcmplq_cnt = 0;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Flush the txq */
+ lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
+ /* Flush the txcmpq */
+ lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
+ }
}
/**
@@ -3987,12 +4057,13 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
uint16_t cfg_value;
- int rc;
+ int rc = 0;
/* Reset HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "0295 Reset HBA Data: x%x x%x\n",
- phba->pport->port_state, psli->sli_flag);
+ "0295 Reset HBA Data: x%x x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag,
+ phba->hba_flag);
/* perform board reset */
phba->fc_eventTag = 0;
@@ -4005,6 +4076,12 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
phba->fcf.fcf_flag = 0;
spin_unlock_irq(&phba->hbalock);
+ /* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */
+ if (phba->hba_flag & HBA_FW_DUMP_OP) {
+ phba->hba_flag &= ~HBA_FW_DUMP_OP;
+ return rc;
+ }
+
/* Now physically reset the device */
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0389 Performing PCI function reset!\n");
@@ -5002,7 +5079,7 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
} while (++fcp_eqidx < phba->cfg_fcp_io_channel);
}
- if (phba->cfg_EnableXLane)
+ if (phba->cfg_fof)
lpfc_sli4_cq_release(phba->sli4_hba.oas_cq, LPFC_QUEUE_REARM);
if (phba->sli4_hba.hba_eq) {
@@ -6722,7 +6799,6 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
MAILBOX_t *mb = &pmbox->u.mb;
struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
/* If the mailbox completed, process the completion and return */
if (lpfc_sli4_process_missed_mbox_completions(phba))
@@ -6764,8 +6840,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
+ lpfc_sli_abort_fcp_rings(phba);
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0345 Resetting board due to mailbox timeout\n");
@@ -8133,6 +8208,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
abort_tag = (uint32_t) iocbq->iotag;
xritag = iocbq->sli4_xritag;
wqe->generic.wqe_com.word7 = 0; /* The ct field has moved so reset */
+ wqe->generic.wqe_com.word10 = 0;
/* words0-2 bpl convert bde */
if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize /
@@ -8639,8 +8715,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
if ((piocb->iocb_flag & LPFC_IO_FCP) ||
(piocb->iocb_flag & LPFC_USE_FCPWQIDX)) {
- if (!phba->cfg_EnableXLane || (!(piocb->iocb_flag &
- LPFC_IO_OAS))) {
+ if (!phba->cfg_fof || (!(piocb->iocb_flag & LPFC_IO_OAS))) {
wq = phba->sli4_hba.fcp_wq[piocb->fcp_wqidx];
} else {
wq = phba->sli4_hba.oas_wq;
@@ -8735,7 +8810,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
if (phba->sli_rev == LPFC_SLI_REV4) {
if (piocb->iocb_flag & LPFC_IO_FCP) {
- if (!phba->cfg_EnableXLane || (!(piocb->iocb_flag &
+ if (!phba->cfg_fof || (!(piocb->iocb_flag &
LPFC_IO_OAS))) {
if (unlikely(!phba->sli4_hba.fcp_wq))
return IOCB_ERROR;
@@ -9170,6 +9245,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba)
pring->sli.sli3.next_cmdidx = 0;
pring->sli.sli3.local_getidx = 0;
pring->sli.sli3.cmdidx = 0;
+ pring->flag = 0;
INIT_LIST_HEAD(&pring->txq);
INIT_LIST_HEAD(&pring->txcmplq);
INIT_LIST_HEAD(&pring->iocb_continueq);
@@ -9805,43 +9881,6 @@ abort_iotag_exit:
}
/**
- * lpfc_sli_iocb_ring_abort - Unconditionally abort all iocbs on an iocb ring
- * @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
- *
- * This function aborts all iocbs in the given ring and frees all the iocb
- * objects in txq. This function issues abort iocbs unconditionally for all
- * the iocb commands in txcmplq. The iocbs in the txcmplq is not guaranteed
- * to complete before the return of this function. The caller is not required
- * to hold any locks.
- **/
-static void
-lpfc_sli_iocb_ring_abort(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
-{
- LIST_HEAD(completions);
- struct lpfc_iocbq *iocb, *next_iocb;
-
- if (pring->ringno == LPFC_ELS_RING)
- lpfc_fabric_abort_hba(phba);
-
- spin_lock_irq(&phba->hbalock);
-
- /* Take off all the iocbs on txq for cancelling */
- list_splice_init(&pring->txq, &completions);
- pring->txq_cnt = 0;
-
- /* Next issue ABTS for everything on the txcmplq */
- list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
- lpfc_sli_abort_iotag_issue(phba, pring, iocb);
-
- spin_unlock_irq(&phba->hbalock);
-
- /* Cancel all the IOCBs from the completions list */
- lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
- IOERR_SLI_ABORTED);
-}
-
-/**
* lpfc_sli_hba_iocb_abort - Abort all iocbs to an hba.
* @phba: pointer to lpfc HBA data structure.
*
@@ -9856,7 +9895,7 @@ lpfc_sli_hba_iocb_abort(struct lpfc_hba *phba)
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
- lpfc_sli_iocb_ring_abort(phba, pring);
+ lpfc_sli_abort_iocb_ring(phba, pring);
}
}
@@ -10081,6 +10120,124 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
}
/**
+ * lpfc_sli_abort_taskmgmt - issue abort for all commands on a host/target/LUN
+ * @vport: Pointer to virtual port.
+ * @pring: Pointer to driver SLI ring object.
+ * @tgt_id: SCSI ID of the target.
+ * @lun_id: LUN ID of the scsi device.
+ * @taskmgmt_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST.
+ *
+ * This function sends an abort command for every SCSI command
+ * associated with the given virtual port pending on the ring
+ * filtered by lpfc_sli_validate_fcp_iocb function.
+ * When taskmgmt_cmd == LPFC_CTX_LUN, the function sends abort only to the
+ * FCP iocbs associated with lun specified by tgt_id and lun_id
+ * parameters
+ * When taskmgmt_cmd == LPFC_CTX_TGT, the function sends abort only to the
+ * FCP iocbs associated with SCSI target specified by tgt_id parameter.
+ * When taskmgmt_cmd == LPFC_CTX_HOST, the function sends abort to all
+ * FCP iocbs associated with virtual port.
+ * This function returns number of iocbs it aborted .
+ * This function is called with no locks held right after a taskmgmt
+ * command is sent.
+ **/
+int
+lpfc_sli_abort_taskmgmt(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
+ uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd cmd)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_iocbq *abtsiocbq;
+ struct lpfc_iocbq *iocbq;
+ IOCB_t *icmd;
+ int sum, i, ret_val;
+ unsigned long iflags;
+ struct lpfc_sli_ring *pring_s4;
+ uint32_t ring_number;
+
+ spin_lock_irq(&phba->hbalock);
+
+ /* all I/Os are in process of being flushed */
+ if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) {
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+ }
+ sum = 0;
+
+ for (i = 1; i <= phba->sli.last_iotag; i++) {
+ iocbq = phba->sli.iocbq_lookup[i];
+
+ if (lpfc_sli_validate_fcp_iocb(iocbq, vport, tgt_id, lun_id,
+ cmd) != 0)
+ continue;
+
+ /*
+ * If the iocbq is already being aborted, don't take a second
+ * action, but do count it.
+ */
+ if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED)
+ continue;
+
+ /* issue ABTS for this IOCB based on iotag */
+ abtsiocbq = __lpfc_sli_get_iocbq(phba);
+ if (abtsiocbq == NULL)
+ continue;
+
+ icmd = &iocbq->iocb;
+ abtsiocbq->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
+ abtsiocbq->iocb.un.acxri.abortContextTag = icmd->ulpContext;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ abtsiocbq->iocb.un.acxri.abortIoTag =
+ iocbq->sli4_xritag;
+ else
+ abtsiocbq->iocb.un.acxri.abortIoTag = icmd->ulpIoTag;
+ abtsiocbq->iocb.ulpLe = 1;
+ abtsiocbq->iocb.ulpClass = icmd->ulpClass;
+ abtsiocbq->vport = vport;
+
+ /* ABTS WQE must go to the same WQ as the WQE to be aborted */
+ abtsiocbq->fcp_wqidx = iocbq->fcp_wqidx;
+ if (iocbq->iocb_flag & LPFC_IO_FCP)
+ abtsiocbq->iocb_flag |= LPFC_USE_FCPWQIDX;
+
+ if (lpfc_is_link_up(phba))
+ abtsiocbq->iocb.ulpCommand = CMD_ABORT_XRI_CN;
+ else
+ abtsiocbq->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
+
+ /* Setup callback routine and issue the command. */
+ abtsiocbq->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
+
+ /*
+ * Indicate the IO is being aborted by the driver and set
+ * the caller's flag into the aborted IO.
+ */
+ iocbq->iocb_flag |= LPFC_DRIVER_ABORTED;
+
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ ring_number = MAX_SLI3_CONFIGURED_RINGS +
+ iocbq->fcp_wqidx;
+ pring_s4 = &phba->sli.ring[ring_number];
+ /* Note: both hbalock and ring_lock must be set here */
+ spin_lock_irqsave(&pring_s4->ring_lock, iflags);
+ ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
+ abtsiocbq, 0);
+ spin_unlock_irqrestore(&pring_s4->ring_lock, iflags);
+ } else {
+ ret_val = __lpfc_sli_issue_iocb(phba, pring->ringno,
+ abtsiocbq, 0);
+ }
+
+
+ if (ret_val == IOCB_ERROR)
+ __lpfc_sli_release_iocbq(phba, abtsiocbq);
+ else
+ sum++;
+ }
+ spin_unlock_irq(&phba->hbalock);
+ return sum;
+}
+
+/**
* lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
* @phba: Pointer to HBA context object.
* @cmdiocbq: Pointer to command iocb.
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 6f04080f4ea8..edb48832c39b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 9b8cda866176..7f50aa04d66a 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2009-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2009-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index e32cbec70324..41675c1193e7 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2013 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2014 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.45"
+#define LPFC_DRIVER_VERSION "10.2.8001.0."
#define LPFC_DRIVER_NAME "lpfc"
/* Used for SLI 2/3 */
@@ -30,4 +30,4 @@
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2013 Emulex. All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2014 Emulex. All rights reserved."