Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits)
  [SCSI] zfcp: clear boxed flag on unit reopen.
  [SCSI] zfcp: clear adapter failed flag if an fsf request times out.
  [SCSI] zfcp: rework request ID management.
  [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI
  [SCSI] zfcp: Locking for req_no and req_seq_no
  [SCSI] zfcp: print S_ID and D_ID with 3 bytes
  [SCSI] ipr: Use PCI-E reset API for new ipr adapter
  [SCSI] qla2xxx: Update version number to 8.01.07-k7.
  [SCSI] qla2xxx: Add MSI support.
  [SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
  [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
  [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
  [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
  [SCSI] zfcp: Stop system after memory corruption
  [SCSI] mesh: cleanup variable usage in interrupt handler
  [SCSI] megaraid: replace yield() with cond_resched()
  [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n
  [SCSI] aacraid: correct SUN products to README
  [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
  [SCSI] aacraid: kexec fix (reset interrupt handler)
  ...

1 files changed, 9 insertions, 2 deletions

diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index f79cb6136906..2623a9bc7775 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2007 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -1078,6 +1078,8 @@ typedef struct {
 /* Start FireFly Register definitions */
 #define PCI_VENDOR_ID_EMULEX        0x10df
 #define PCI_DEVICE_ID_FIREFLY       0x1ae5
+#define PCI_DEVICE_ID_SAT_SMB       0xf011
+#define PCI_DEVICE_ID_SAT_MID       0xf015
 #define PCI_DEVICE_ID_RFLY          0xf095
 #define PCI_DEVICE_ID_PFLY          0xf098
 #define PCI_DEVICE_ID_LP101         0xf0a1
@@ -1089,6 +1091,9 @@ typedef struct {
 #define PCI_DEVICE_ID_NEPTUNE       0xf0f5
 #define PCI_DEVICE_ID_NEPTUNE_SCSP  0xf0f6
 #define PCI_DEVICE_ID_NEPTUNE_DCSP  0xf0f7
+#define PCI_DEVICE_ID_SAT           0xf100
+#define PCI_DEVICE_ID_SAT_SCSP      0xf111
+#define PCI_DEVICE_ID_SAT_DCSP      0xf112
 #define PCI_DEVICE_ID_SUPERFLY      0xf700
 #define PCI_DEVICE_ID_DRAGONFLY     0xf800
 #define PCI_DEVICE_ID_CENTAUR       0xf900
@@ -1098,6 +1103,7 @@ typedef struct {
 #define PCI_DEVICE_ID_LP10000S      0xfc00
 #define PCI_DEVICE_ID_LP11000S      0xfc10
 #define PCI_DEVICE_ID_LPE11000S     0xfc20
+#define PCI_DEVICE_ID_SAT_S         0xfc40
 #define PCI_DEVICE_ID_HELIOS        0xfd00
 #define PCI_DEVICE_ID_HELIOS_SCSP   0xfd11
 #define PCI_DEVICE_ID_HELIOS_DCSP   0xfd12
@@ -1118,6 +1124,7 @@ typedef struct {
 #define HELIOS_JEDEC_ID             0x0364
 #define ZEPHYR_JEDEC_ID             0x0577
 #define VIPER_JEDEC_ID              0x4838
+#define SATURN_JEDEC_ID             0x1004
 
 #define JEDEC_ID_MASK               0x0FFFF000
 #define JEDEC_ID_SHIFT              12
@@ -1565,7 +1572,7 @@ typedef struct {
 #define LINK_SPEED_1G   1       /* 1 Gigabaud */
 #define LINK_SPEED_2G   2       /* 2 Gigabaud */
 #define LINK_SPEED_4G   4       /* 4 Gigabaud */
-#define LINK_SPEED_8G   8       /* 4 Gigabaud */
+#define LINK_SPEED_8G   8       /* 8 Gigabaud */
 #define LINK_SPEED_10G   16      /* 10 Gigabaud */
 
 } INIT_LINK_VAR;