[SCSI] iscsi_tcp: fix potential lockup with write commands

There is a race condition in iscsi_tcp.c that may cause it to forget
that it received a R2T from the target.  This race may cause a data-out
command (such as a write) to lock up.  The race occurs here:

static int
iscsi_send_unsol_pdu(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
{
	struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
	int rc;

	if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) {
		BUG_ON(!ctask->unsol_count);
		tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR; <---- RACE
		...

static int
iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
{
	...
	tcp_ctask->xmstate |= XMSTATE_SOL_HDR_INIT; <---- RACE
	...

While iscsi_xmitworker() (called from scsi_queue_work()) is preparing to
send unsolicited data, iscsi_tcp_data_recv() (called from
tcp_read_sock()) interrupts it upon receipt of a R2T from the target.
Both contexts do read-modify-write of tcp_ctask->xmstate.  Usually, gcc
on x86 will make &= and |= atomic on UP (not guaranteed of course), but
in this case iscsi_send_unsol_pdu() reads the value of xmstate before
clearing the bit, which causes gcc to read xmstate into a CPU register,
test it, clear the bit, and then store it back to memory.  If the recv
interrupt happens during this sequence, then the XMSTATE_SOL_HDR_INIT
bit set by the recv interrupt will be lost, and the R2T will be
forgotten.

The patch below (against 2.6.24-rc1) converts accesses of xmstate to use
set_bit, clear_bit, and test_bit instead of |= and &=.  I have tested
this patch and verified that it fixes the problem.  Another possible
approach would be to hold a lock during most of the rx/tx setup and
post-processing, and drop the lock only for the actual rx/tx.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 17 insertions, 17 deletions

diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h
index 7eba44df0a7f..68c36cc8997e 100644
--- a/drivers/scsi/iscsi_tcp.h
+++ b/drivers/scsi/iscsi_tcp.h
@@ -32,21 +32,21 @@
 #define IN_PROGRESS_PAD_RECV		0x4
 
 /* xmit state machine */
-#define XMSTATE_IDLE			0x0
-#define XMSTATE_CMD_HDR_INIT		0x1
-#define XMSTATE_CMD_HDR_XMIT		0x2
-#define XMSTATE_IMM_HDR			0x4
-#define XMSTATE_IMM_DATA		0x8
-#define XMSTATE_UNS_INIT		0x10
-#define XMSTATE_UNS_HDR			0x20
-#define XMSTATE_UNS_DATA		0x40
-#define XMSTATE_SOL_HDR			0x80
-#define XMSTATE_SOL_DATA		0x100
-#define XMSTATE_W_PAD			0x200
-#define XMSTATE_W_RESEND_PAD		0x400
-#define XMSTATE_W_RESEND_DATA_DIGEST	0x800
-#define XMSTATE_IMM_HDR_INIT		0x1000
-#define XMSTATE_SOL_HDR_INIT		0x2000
+#define XMSTATE_VALUE_IDLE			0
+#define XMSTATE_BIT_CMD_HDR_INIT		0
+#define XMSTATE_BIT_CMD_HDR_XMIT		1
+#define XMSTATE_BIT_IMM_HDR			2
+#define XMSTATE_BIT_IMM_DATA			3
+#define XMSTATE_BIT_UNS_INIT			4
+#define XMSTATE_BIT_UNS_HDR			5
+#define XMSTATE_BIT_UNS_DATA			6
+#define XMSTATE_BIT_SOL_HDR			7
+#define XMSTATE_BIT_SOL_DATA			8
+#define XMSTATE_BIT_W_PAD			9
+#define XMSTATE_BIT_W_RESEND_PAD		10
+#define XMSTATE_BIT_W_RESEND_DATA_DIGEST	11
+#define XMSTATE_BIT_IMM_HDR_INIT		12
+#define XMSTATE_BIT_SOL_HDR_INIT		13
 
 #define ISCSI_PAD_LEN			4
 #define ISCSI_SG_TABLESIZE		SG_ALL
@@ -122,7 +122,7 @@ struct iscsi_data_task {
 struct iscsi_tcp_mgmt_task {
 	struct iscsi_hdr	hdr;
 	char			hdrext[sizeof(__u32)]; /* Header-Digest */
-	int			xmstate;	/* mgmt xmit progress */
+	unsigned long		xmstate;	/* mgmt xmit progress */
 	struct iscsi_buf	headbuf;	/* header buffer */
 	struct iscsi_buf	sendbuf;	/* in progress buffer */
 	int			sent;
@@ -150,7 +150,7 @@ struct iscsi_tcp_cmd_task {
 	int			pad_count;		/* padded bytes */
 	struct iscsi_buf	headbuf;		/* header buf (xmit) */
 	struct iscsi_buf	sendbuf;		/* in progress buffer*/
-	int			xmstate;		/* xmit xtate machine */
+	unsigned long		xmstate;		/* xmit xtate machine */
 	int			sent;
 	struct scatterlist	*sg;			/* per-cmd SG list  */
 	struct scatterlist	*bad_sg;		/* assert statement */