[SCSI] ipr: Use PCI-E reset API for new ipr adapter

Use a newly added PCI API to issue a PCI Fundamental reset
(warm reset) to a new ipr PCI-E adapter. Typically, the
ipr adapter uses the start BIST bit in config space to reset
an adapter. Issuing start BIST on this particular adapter
results in the PCI-E logic on the card losing sync, which
causes PCI-E errors, making the card unusable. The only reset
mechanism that exists on this hardware that does not have this
problem is PCI Fundamental reset (warm reset).

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 65 insertions, 5 deletions

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 101e519844df..4baa79e68679 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6641,6 +6641,48 @@ static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
 }
 
 /**
+ * ipr_reset_slot_reset_done - Clear PCI reset to the adapter
+ * @ipr_cmd:	ipr command struct
+ *
+ * Description: This clears PCI reset to the adapter and delays two seconds.
+ *
+ * Return value:
+ * 	IPR_RC_JOB_RETURN
+ **/
+static int ipr_reset_slot_reset_done(struct ipr_cmnd *ipr_cmd)
+{
+	ENTER;
+	pci_set_pcie_reset_state(ipr_cmd->ioa_cfg->pdev, pcie_deassert_reset);
+	ipr_cmd->job_step = ipr_reset_bist_done;
+	ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
+	LEAVE;
+	return IPR_RC_JOB_RETURN;
+}
+
+/**
+ * ipr_reset_slot_reset - Reset the PCI slot of the adapter.
+ * @ipr_cmd:	ipr command struct
+ *
+ * Description: This asserts PCI reset to the adapter.
+ *
+ * Return value:
+ * 	IPR_RC_JOB_RETURN
+ **/
+static int ipr_reset_slot_reset(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+	struct pci_dev *pdev = ioa_cfg->pdev;
+
+	ENTER;
+	pci_block_user_cfg_access(pdev);
+	pci_set_pcie_reset_state(pdev, pcie_warm_reset);
+	ipr_cmd->job_step = ipr_reset_slot_reset_done;
+	ipr_reset_start_timer(ipr_cmd, IPR_PCI_RESET_TIMEOUT);
+	LEAVE;
+	return IPR_RC_JOB_RETURN;
+}
+
+/**
  * ipr_reset_allowed - Query whether or not IOA can be reset
  * @ioa_cfg:	ioa config struct
  *
@@ -6679,7 +6721,7 @@ static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd)
 		ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
 		ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
 	} else {
-		ipr_cmd->job_step = ipr_reset_start_bist;
+		ipr_cmd->job_step = ioa_cfg->reset;
 		rc = IPR_RC_JOB_CONTINUE;
 	}
 
@@ -6712,7 +6754,7 @@ static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd)
 		writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg);
 		ipr_cmd->job_step = ipr_reset_wait_to_start_bist;
 	} else {
-		ipr_cmd->job_step = ipr_reset_start_bist;
+		ipr_cmd->job_step = ioa_cfg->reset;
 	}
 
 	ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT;
@@ -6994,8 +7036,11 @@ static pci_ers_result_t ipr_pci_slot_reset(struct pci_dev *pdev)
 	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
-	_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space,
-	                                 IPR_SHUTDOWN_NONE);
+	if (ioa_cfg->needs_warm_reset)
+		ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+	else
+		_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space,
+					IPR_SHUTDOWN_NONE);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
 	return PCI_ERS_RESULT_RECOVERED;
 }
@@ -7483,6 +7528,14 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 	else
 		ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
 
+	rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &ioa_cfg->revid);
+
+	if (rc != PCIBIOS_SUCCESSFUL) {
+		dev_err(&pdev->dev, "Failed to read PCI revision ID\n");
+		rc = -EIO;
+		goto out_scsi_host_put;
+	}
+
 	ipr_regs_pci = pci_resource_start(pdev, 0);
 
 	rc = pci_request_regions(pdev, IPR_NAME);
@@ -7569,6 +7622,13 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto cleanup_nolog;
 	}
 
+	if ((dev_id->driver_data & IPR_USE_PCI_WARM_RESET) ||
+	    (dev_id->device == PCI_DEVICE_ID_IBM_OBSIDIAN_E && !ioa_cfg->revid)) {
+		ioa_cfg->needs_warm_reset = 1;
+		ioa_cfg->reset = ipr_reset_slot_reset;
+	} else
+		ioa_cfg->reset = ipr_reset_start_bist;
+
 	spin_lock(&ipr_driver_lock);
 	list_add_tail(&ioa_cfg->queue, &ipr_ioa_head);
 	spin_unlock(&ipr_driver_lock);
@@ -7835,7 +7895,7 @@ static struct pci_device_id ipr_pci_table[] __devinitdata = {
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B3, 0, 0, 0 },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0,
-	      IPR_USE_LONG_TRANSOP_TIMEOUT },
+	      IPR_USE_LONG_TRANSOP_TIMEOUT | IPR_USE_PCI_WARM_RESET },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, 0, 0, 0 },
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,