summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/atari_NCR5380.c
diff options
context:
space:
mode:
authorMichael Schmitz <schmitzmic@gmail.com>2014-05-02 20:43:01 +1200
committerChristoph Hellwig <hch@lst.de>2014-05-19 19:12:24 +0200
commit2b0f834ca3c93e3d76ae335586b41ed921c5a293 (patch)
tree2c25651e4645deab6db707645528468105b4cc95 /drivers/scsi/atari_NCR5380.c
parentb413cf490682d39a95e80a4751022b858d21bc6b (diff)
downloadlinux-2b0f834ca3c93e3d76ae335586b41ed921c5a293.tar.bz2
m68k/atari - atari_scsi: change abort/reset return codes
[Resend of earlier patch - added equivalent changes to sun3 NCR5380 code] The abort/reset lowlevel return codes had changed with the new error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this. Change reset handling for Atari to clear queues only, do not attempt to call done() on each command aborted by the reset. The EH code should do that for us. Queues _must_ be cleared, otherwise atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking further error recovery. Update the Sun3 NCR5380 driver as well - the Sun3 driver was derived from the Atari one. Kudos to Finn Thain for the Sun3 part and cleaning up the header files. After the header cleanup, the initio.h include (!) can be dropped from sun3_scsi.h now. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James E.J. Bottomley <JBottomley@parallels.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
Diffstat (limited to 'drivers/scsi/atari_NCR5380.c')
-rw-r--r--drivers/scsi/atari_NCR5380.c31
1 files changed, 19 insertions, 12 deletions
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 0f3cdbc80ba6..e4aaf9a51de3 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -2683,11 +2683,11 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
local_irq_restore(flags);
cmd->scsi_done(cmd);
falcon_release_lock_if_possible(hostdata);
- return SCSI_ABORT_SUCCESS;
+ return SUCCESS;
} else {
/* local_irq_restore(flags); */
printk("scsi%d: abort of connected command failed!\n", HOSTNO);
- return SCSI_ABORT_ERROR;
+ return FAILED;
}
}
#endif
@@ -2711,7 +2711,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
* yet... */
tmp->scsi_done(tmp);
falcon_release_lock_if_possible(hostdata);
- return SCSI_ABORT_SUCCESS;
+ return SUCCESS;
}
}
@@ -2729,7 +2729,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
if (hostdata->connected) {
local_irq_restore(flags);
ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
- return SCSI_ABORT_SNOOZE;
+ return FAILED;
}
/*
@@ -2764,7 +2764,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
if (NCR5380_select(instance, cmd, (int)cmd->tag))
- return SCSI_ABORT_BUSY;
+ return FAILED;
ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
@@ -2791,7 +2791,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
local_irq_restore(flags);
tmp->scsi_done(tmp);
falcon_release_lock_if_possible(hostdata);
- return SCSI_ABORT_SUCCESS;
+ return SUCCESS;
}
}
}
@@ -2816,7 +2816,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
*/
falcon_release_lock_if_possible(hostdata);
- return SCSI_ABORT_NOT_RUNNING;
+ return FAILED;
}
@@ -2825,7 +2825,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
*
* Purpose : reset the SCSI bus.
*
- * Returns : SCSI_RESET_WAKEUP
+ * Returns : SUCCESS or FAILURE
*
*/
@@ -2834,7 +2834,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
SETUP_HOSTDATA(cmd->device->host);
int i;
unsigned long flags;
-#if 1
+#if defined(RESET_RUN_DONE)
Scsi_Cmnd *connected, *disconnected_queue;
#endif
@@ -2859,7 +2859,14 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
* through anymore ... */
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX */
+ /* MSch 20140115 - looking at the generic NCR5380 driver, all of this
+ * should go.
+ * Catch-22: if we don't clear all queues, the SCSI driver lock will
+ * not be reset by atari_scsi_reset()!
+ */
+
+#if defined(RESET_RUN_DONE)
+ /* XXX Should now be done by midlevel code, but it's broken XXX */
/* XXX see below XXX */
/* MSch: old-style reset: actually abort all command processing here */
@@ -2915,7 +2922,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
* the midlevel code that the reset was SUCCESSFUL, and there is no
* need to 'wake up' the commands by a request_sense
*/
- return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET;
+ return SUCCESS;
#else /* 1 */
/* MSch: new-style reset handling: let the mid-level do what it can */
@@ -2963,6 +2970,6 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
local_irq_restore(flags);
/* we did no complete reset of all commands, so a wakeup is required */
- return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET;
+ return SUCCESS;
#endif /* 1 */
}