summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/arm
diff options
context:
space:
mode:
authorFinn Thain <fthain@telegraphics.com.au>2016-01-03 16:05:08 +1100
committerMartin K. Petersen <martin.petersen@oracle.com>2016-01-06 21:42:52 -0500
commitb6488f97d3b5b602a066956e58a1ba282456d79b (patch)
tree1ca8032c303d20869e0955f962c3747fbb297322 /drivers/scsi/arm
parentb01ec34895720348dab7eae6bfb28a5799130bce (diff)
downloadlinux-b6488f97d3b5b602a066956e58a1ba282456d79b.tar.bz2
ncr5380: Split NCR5380_init() into two functions
This patch splits the NCR5380_init() function into two parts, similar to the scheme used with atari_NCR5380.c. This avoids two problems. Firstly, NCR5380_init() may perform a bus reset, which would cause the chip to assert IRQ. The chip is unable to mask its bus reset interrupt. Drivers can't call request_irq() before calling NCR5380_init(), because initialization must happen before the interrupt handler executes. If driver initialization causes an interrupt it may be problematic on some platforms. To avoid that, first move the bus reset code into NCR5380_maybe_reset_bus(). Secondly, NCR5380_init() contains some board-specific interrupt setup code for the NCR53C400 that does not belong in the core driver. In moving this code, better not re-order interrupt initialization and bus reset. Again, the solution is to move the bus reset code into NCR5380_maybe_reset_bus(). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/arm')
-rw-r--r--drivers/scsi/arm/cumana_1.c2
-rw-r--r--drivers/scsi/arm/oak.c2
2 files changed, 4 insertions, 0 deletions
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index 8996a6ccc08f..c7dc65e39cdb 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -240,6 +240,8 @@ static int cumanascsi1_probe(struct expansion_card *ec,
NCR5380_init(host, 0);
+ NCR5380_maybe_reset_bus(host);
+
priv(host)->ctrl = 0;
writeb(0, priv(host)->base + CTRL);
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index aa5310bef9b7..ca0f31d22f43 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -145,6 +145,8 @@ static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
NCR5380_init(host, 0);
+ NCR5380_maybe_reset_bus(host);
+
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_unmap;