Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
  ufs, mpt3sas, hisi_sas.

  In addition we have removed several really old drivers: sym53c416,
  NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c
  initialization from all remaining drivers.

  Plus an assortment of bug fixes, initialization errors and other minor
  fixes"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits)
  scsi: ufs: Add support for Auto-Hibernate Idle Timer
  scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries
  scsi: qla2xxx: fx00 copypaste typo
  scsi: qla2xxx: fix error message on <qla2400
  scsi: smartpqi: update driver version
  scsi: smartpqi: workaround fw bug for oq deletion
  scsi: arcmsr: Change driver version to v1.40.00.05-20180309
  scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready
  scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.
  scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug
  scsi: qla2xxx: Update driver version to 10.00.00.06-k
  scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling
  scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
  scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY
  scsi: qla2xxx: Remove nvme_done_list
  scsi: qla2xxx: Return busy if rport going away
  scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change
  scsi: qla2xxx: Add FC-NVMe abort processing
  scsi: qla2xxx: Add changes for devloss timeout in driver
  ...

2 files changed, 198 insertions, 12 deletions

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 0095fcbd1c88..29bf1e60f542 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1231,6 +1231,7 @@ struct src_registers {
 
 #define SRC_ODR_SHIFT		12
 #define SRC_IDR_SHIFT		9
+#define SRC_MSI_READ_MASK	0x1000
 
 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
 
@@ -1528,6 +1529,7 @@ struct aac_bus_info_response {
 #define AAC_COMM_MESSAGE_TYPE3		5
 
 #define AAC_EXTOPT_SA_FIRMWARE		cpu_to_le32(1<<1)
+#define AAC_EXTOPT_SOFT_RESET		cpu_to_le32(1<<16)
 
 /* MSIX context */
 struct aac_msix_ctx {
@@ -1662,6 +1664,7 @@ struct aac_dev
 	u8			raw_io_64;
 	u8			printf_enabled;
 	u8			in_reset;
+	u8			in_soft_reset;
 	u8			msi;
 	u8			sa_firmware;
 	int			management_fib_count;
@@ -2504,6 +2507,7 @@ struct aac_hba_info {
 #define RCV_TEMP_READINGS		0x00000025
 #define GET_COMM_PREFERRED_SETTINGS	0x00000026
 #define IOP_RESET_FW_FIB_DUMP		0x00000034
+#define DROP_IO			0x00000035
 #define IOP_RESET			0x00001000
 #define IOP_RESET_ALWAYS		0x00001001
 #define RE_INIT_ADAPTER		0x000000ee
@@ -2539,6 +2543,7 @@ struct aac_hba_info {
 #define	FLASH_UPD_PENDING		0x00002000
 #define	FLASH_UPD_SUCCESS		0x00004000
 #define	FLASH_UPD_FAILED		0x00008000
+#define	INVALID_OMR			0xffffffff
 #define	FWUPD_TIMEOUT			(5 * 60)
 
 /*
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index a802bddf04aa..4ebb35a29caa 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -255,7 +255,8 @@ static int src_sync_cmd(struct aac_dev *dev, u32 command,
 	 */
 	src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
 
-	if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) {
+	if ((!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) &&
+		!dev->in_soft_reset) {
 		ok = 0;
 		start = jiffies;
 
@@ -679,6 +680,25 @@ void aac_set_intx_mode(struct aac_dev *dev)
 	}
 }
 
+static void aac_clear_omr(struct aac_dev *dev)
+{
+	u32 omr_value = 0;
+
+	omr_value = src_readl(dev, MUnit.OMR);
+
+	/*
+	 * Check for PCI Errors or Kernel Panic
+	 */
+	if ((omr_value == INVALID_OMR) || (omr_value & KERNEL_PANIC))
+		omr_value = 0;
+
+	/*
+	 * Preserve MSIX Value if any
+	 */
+	src_writel(dev, MUnit.OMR, omr_value & AAC_INT_MODE_MSIX);
+	src_readl(dev, MUnit.OMR);
+}
+
 static void aac_dump_fw_fib_iop_reset(struct aac_dev *dev)
 {
 	__le32 supported_options3;
@@ -739,6 +759,8 @@ static void aac_send_iop_reset(struct aac_dev *dev)
 
 	aac_set_intx_mode(dev);
 
+	aac_clear_omr(dev);
+
 	src_writel(dev, MUnit.IDR, IOP_SRC_RESET_MASK);
 
 	msleep(5000);
@@ -748,6 +770,7 @@ static void aac_send_hardware_soft_reset(struct aac_dev *dev)
 {
 	u_int32_t val;
 
+	aac_clear_omr(dev);
 	val = readl(((char *)(dev->base) + IBW_SWR_OFFSET));
 	val |= 0x01;
 	writel(val, ((char *)(dev->base) + IBW_SWR_OFFSET));
@@ -992,6 +1015,148 @@ error_iounmap:
 	return -1;
 }
 
+static int aac_src_wait_sync(struct aac_dev *dev, int *status)
+{
+	unsigned long start = jiffies;
+	unsigned long usecs = 0;
+	int delay = 5 * HZ;
+	int rc = 1;
+
+	while (time_before(jiffies, start+delay)) {
+		/*
+		 * Delay 5 microseconds to let Mon960 get info.
+		 */
+		udelay(5);
+
+		/*
+		 * Mon960 will set doorbell0 bit when it has completed the
+		 * command.
+		 */
+		if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
+			/*
+			 * Clear: the doorbell.
+			 */
+			if (dev->msi_enabled)
+				aac_src_access_devreg(dev, AAC_CLEAR_SYNC_BIT);
+			else
+				src_writel(dev, MUnit.ODR_C,
+					OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+			rc = 0;
+
+			break;
+		}
+
+		/*
+		 * Yield the processor in case we are slow
+		 */
+		usecs = 1 * USEC_PER_MSEC;
+		usleep_range(usecs, usecs + 50);
+	}
+	/*
+	 * Pull the synch status from Mailbox 0.
+	 */
+	if (status && !rc) {
+		status[0] = readl(&dev->IndexRegs->Mailbox[0]);
+		status[1] = readl(&dev->IndexRegs->Mailbox[1]);
+		status[2] = readl(&dev->IndexRegs->Mailbox[2]);
+		status[3] = readl(&dev->IndexRegs->Mailbox[3]);
+		status[4] = readl(&dev->IndexRegs->Mailbox[4]);
+	}
+
+	return rc;
+}
+
+/**
+ *  aac_src_soft_reset	-	perform soft reset to speed up
+ *  access
+ *
+ *  Assumptions: That the controller is in a state where we can
+ *  bring it back to life with an init struct. We can only use
+ *  fast sync commands, as the timeout is 5 seconds.
+ *
+ *  @dev: device to configure
+ *
+ */
+
+static int aac_src_soft_reset(struct aac_dev *dev)
+{
+	u32 status_omr = src_readl(dev, MUnit.OMR);
+	u32 status[5];
+	int rc = 1;
+	int state = 0;
+	char *state_str[7] = {
+		"GET_ADAPTER_PROPERTIES Failed",
+		"GET_ADAPTER_PROPERTIES timeout",
+		"SOFT_RESET not supported",
+		"DROP_IO Failed",
+		"DROP_IO timeout",
+		"Check Health failed"
+	};
+
+	if (status_omr == INVALID_OMR)
+		return 1;       // pcie hosed
+
+	if (!(status_omr & KERNEL_UP_AND_RUNNING))
+		return 1;       // not up and running
+
+	/*
+	 * We go into soft reset mode to allow us to handle response
+	 */
+	dev->in_soft_reset = 1;
+	dev->msi_enabled = status_omr & AAC_INT_MODE_MSIX;
+
+	/* Get adapter properties */
+	rc = aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 0, 0, 0,
+		0, 0, 0, status+0, status+1, status+2, status+3, status+4);
+	if (rc)
+		goto out;
+
+	state++;
+	if (aac_src_wait_sync(dev, status)) {
+		rc = 1;
+		goto out;
+	}
+
+	state++;
+	if (!(status[1] & le32_to_cpu(AAC_OPT_EXTENDED) &&
+		(status[4] & le32_to_cpu(AAC_EXTOPT_SOFT_RESET)))) {
+		rc = 2;
+		goto out;
+	}
+
+	if ((status[1] & le32_to_cpu(AAC_OPT_EXTENDED)) &&
+		(status[4] & le32_to_cpu(AAC_EXTOPT_SA_FIRMWARE)))
+		dev->sa_firmware = 1;
+
+	state++;
+	rc = aac_adapter_sync_cmd(dev, DROP_IO, 0, 0, 0, 0, 0, 0,
+		 status+0, status+1, status+2, status+3, status+4);
+
+	if (rc)
+		goto out;
+
+	state++;
+	if (aac_src_wait_sync(dev, status)) {
+		rc = 3;
+		goto out;
+	}
+
+	if (status[1])
+		dev_err(&dev->pdev->dev, "%s: %d outstanding I/O pending\n",
+			__func__, status[1]);
+
+	state++;
+	rc = aac_src_check_health(dev);
+
+out:
+	dev->in_soft_reset = 0;
+	dev->msi_enabled = 0;
+	if (rc)
+		dev_err(&dev->pdev->dev, "%s: %s status = %d", __func__,
+			state_str[state], rc);
+
+return rc;
+}
 /**
  *  aac_srcv_init	-	initialize an SRCv card
  *  @dev: device to configure
@@ -1021,8 +1186,10 @@ int aac_srcv_init(struct aac_dev *dev)
 
 	if (dev->init_reset) {
 		dev->init_reset = false;
-		if (!aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET))
+		if (aac_src_soft_reset(dev)) {
+			aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET);
 			++restart;
+		}
 	}
 
 	/*
@@ -1072,13 +1239,16 @@ int aac_srcv_init(struct aac_dev *dev)
 		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
 		goto error_iounmap;
 	}
+
 	start = jiffies;
 	/*
 	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
 	 */
-	while (!((status = src_readl(dev, MUnit.OMR)) &
-		KERNEL_UP_AND_RUNNING) ||
-		status == 0xffffffff) {
+	do {
+		status = src_readl(dev, MUnit.OMR);
+		if (status == INVALID_OMR)
+			status = 0;
+
 		if ((restart &&
 		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
 		  time_after(jiffies, start+HZ*startup_timeout)) {
@@ -1098,7 +1268,8 @@ int aac_srcv_init(struct aac_dev *dev)
 			++restart;
 		}
 		msleep(1);
-	}
+	} while (!(status & KERNEL_UP_AND_RUNNING));
+
 	if (restart && aac_commit)
 		aac_commit = 1;
 	/*
@@ -1234,13 +1405,23 @@ void aac_src_access_devreg(struct aac_dev *dev, int mode)
 
 static int aac_src_get_sync_status(struct aac_dev *dev)
 {
+	int msix_val = 0;
+	int legacy_val = 0;
 
-	int val;
+	msix_val = src_readl(dev, MUnit.ODR_MSI) & SRC_MSI_READ_MASK ? 1 : 0;
 
-	if (dev->msi_enabled)
-		val = src_readl(dev, MUnit.ODR_MSI) & 0x1000 ? 1 : 0;
-	else
-		val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
+	if (!dev->msi_enabled) {
+		/*
+		 * if Legacy int status indicates cmd is not complete
+		 * sample MSIx register to see if it indiactes cmd complete,
+		 * if yes set the controller in MSIx mode and consider cmd
+		 * completed
+		 */
+		legacy_val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
+		if (!(legacy_val & 1) && msix_val)
+			dev->msi_enabled = 1;
+		return legacy_val;
+	}
 
-	return val;
+	return msix_val;
 }