diff options
| author | Finn Thain <fthain@telegraphics.com.au> | 2016-01-03 16:05:50 +1100 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2016-01-06 21:43:04 -0500 |
| commit | be3f4121aa352d8fef77a57df4b5e106d7f9a917 (patch) | |
| tree | eedef716328818f44a6fb73dd25d8c9e4b322ed2 /drivers/scsi/NCR5380.h | |
| parent | e42d01518d006c4557e202bc9e8fdc41972fb49f (diff) | |
| download | linux-be3f4121aa352d8fef77a57df4b5e106d7f9a917.tar.bz2 | |
ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E
Remove FLAG_DTC3181E. It was used to suppress a final Arbitration Lost
(SEL asserted) test that isn't actually needed. The test was suppressed
because it causes problems for DTC436 and DTC536 chips. It takes place
after the host wins arbitration, so SEL has been asserted. These chips
can't seem to tell whether it was the host or another bus device that
did so.
This questionable final test appears in a flow chart in an early NCR5380
datasheet. It was removed from later documents like the DP5380 datasheet.
By the time this final test takes place, the driver has already tested
the Arbitration Lost bit several times. The first test happens 3 us after
BUS FREE (or longer due to register access delays). The protocol requires
that a device stop signalling within 1.8 us after BUS FREE unless it won
arbitration, in which case it must assert SEL, which is detected 1.2 us
later by the first Arbitration Lost test.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/NCR5380.h')
| -rw-r--r-- | drivers/scsi/NCR5380.h | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h index 9777602daa3d..96fced9e6064 100644 --- a/drivers/scsi/NCR5380.h +++ b/drivers/scsi/NCR5380.h @@ -232,7 +232,6 @@ #define FLAG_NO_DMA_FIXUP 1 /* No DMA errata workarounds */ #define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */ -#define FLAG_DTC3181E 16 /* DTC3181E */ #define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */ #define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */ #define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */ |