ncr5380: Fix EH during arbitration and selection

During arbitration and selection, the relevant command is invisible to
exception handlers and can be found only in a pointer on the stack of a
different thread.

When eh_abort_handler can't find a given command, it can't decide whether
that command was completed already or is still in arbitration or selection
phase. But it must return either SUCCESS (e.g. command completed earlier)
or FAILED (could not abort the nexus, try bus reset).

The solution is to make sure all commands belonging to the LLD are always
visible to exception handlers. Add another scsi_cmnd pointer to the
hostdata struct to track the command in arbitration or selection phase.

Replace 'retain_dma_irq' with the new 'selecting' pointer, to bring
atari_NCR5380.c into line with NCR5380.c.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 57 insertions, 19 deletions

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d24852b2a7f3..32355b62808b 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -912,9 +912,9 @@ static void NCR5380_main(struct work_struct *work)
 			 * entire unit.
 			 */
 
-			if (!NCR5380_select(instance, cmd)) {
-				dsprintk(NDEBUG_MAIN, instance, "main: selected target %d for command %p\n",
-				         scmd_id(cmd), cmd);
+			cmd = NCR5380_select(instance, cmd);
+			if (!cmd) {
+				dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
 			} else {
 				dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
 				         "main: select failed, returning %p to queue\n", cmd);
@@ -1061,9 +1061,9 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
  * Inputs : instance - instantiation of the 5380 driver on which this 
  *      target lives, cmd - SCSI command to execute.
  * 
- * Returns : -1 if selection failed but should be retried.
- *      0 if selection failed and should not be retried.
- *      0 if selection succeeded completely (hostdata->connected == cmd).
+ * Returns cmd if selection failed but should be retried,
+ * NULL if selection failed and should not be retried, or
+ * NULL if selection succeeded (hostdata->connected == cmd).
  *
  * Side effects : 
  *      If bus busy, arbitration failed, etc, NCR5380_select() will exit 
@@ -1081,7 +1081,8 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
  *	Locks: caller holds hostdata lock in IRQ mode
  */
  
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
+                                        struct scsi_cmnd *cmd)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	unsigned char tmp[3], phase;
@@ -1092,6 +1093,15 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 	NCR5380_dprint(NDEBUG_ARBITRATION, instance);
 	dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
 
+	/*
+	 * Arbitration and selection phases are slow and involve dropping the
+	 * lock, so we have to watch out for EH. An exception handler may
+	 * change 'selecting' to NULL. This function will then return NULL
+	 * so that the caller will forget about 'cmd'. (During information
+	 * transfer phases, EH may change 'connected' to NULL.)
+	 */
+	hostdata->selecting = cmd;
+
 	/* 
 	 * Set the phase bits to 0, otherwise the NCR5380 won't drive the 
 	 * data bus during SELECTION.
@@ -1117,13 +1127,13 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 	spin_lock_irq(&hostdata->lock);
 	if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
 		/* Reselection interrupt */
-		return -1;
+		goto out;
 	}
 	if (err < 0) {
 		NCR5380_write(MODE_REG, MR_BASE);
 		shost_printk(KERN_ERR, instance,
 		             "select: arbitration timeout\n");
-		return -1;
+		goto out;
 	}
 	spin_unlock_irq(&hostdata->lock);
 
@@ -1135,7 +1145,7 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 		NCR5380_write(MODE_REG, MR_BASE);
 		dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
 		spin_lock_irq(&hostdata->lock);
-		return -1;
+		goto out;
 	}
 
 	/* After/during arbitration, BSY should be asserted.
@@ -1159,7 +1169,13 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 
 	/* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
 	if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
-		return -1;
+		goto out;
+
+	if (!hostdata->selecting) {
+		NCR5380_write(MODE_REG, MR_BASE);
+		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+		goto out;
+	}
 
 	dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
 
@@ -1232,18 +1248,21 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 		if (!hostdata->connected)
 			NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
 		printk("scsi%d : reselection after won arbitration?\n", instance->host_no);
-		return -1;
+		goto out;
 	}
 
 	if (err < 0) {
 		spin_lock_irq(&hostdata->lock);
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		cmd->result = DID_BAD_TARGET << 16;
-		complete_cmd(instance, cmd);
 		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-		dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n",
-		        instance->host_no);
-		return 0;
+		/* Can't touch cmd if it has been reclaimed by the scsi ML */
+		if (hostdata->selecting) {
+			cmd->result = DID_BAD_TARGET << 16;
+			complete_cmd(instance, cmd);
+			dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n");
+			cmd = NULL;
+		}
+		goto out;
 	}
 
 	/* 
@@ -1279,7 +1298,11 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 		shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-		return -1;
+		goto out;
+	}
+	if (!hostdata->selecting) {
+		do_abort(instance);
+		goto out;
 	}
 
 	dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
@@ -1300,7 +1323,13 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 
 	initialize_SCp(cmd);
 
-	return 0;
+	cmd = NULL;
+
+out:
+	if (!hostdata->selecting)
+		return NULL;
+	hostdata->selecting = NULL;
+	return cmd;
 }
 
 /* 
@@ -2352,6 +2381,15 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 		cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
 	}
 
+	if (hostdata->selecting == cmd) {
+		dsprintk(NDEBUG_ABORT, instance,
+		         "abort: cmd %p == selecting\n", cmd);
+		hostdata->selecting = NULL;
+		cmd->result = DID_ABORT << 16;
+		complete_cmd(instance, cmd);
+		goto out;
+	}
+
 	if (list_del_cmd(&hostdata->disconnected, cmd)) {
 		dsprintk(NDEBUG_ABORT, instance,
 		         "abort: removed %p from disconnected list\n", cmd);