Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (81 commits)
  [S390] remove duplicated #includes
  [S390] cpumask: use mm_cpumask() wrapper
  [S390] cpumask: Use accessors code.
  [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.
  [S390] cpumask: remove cpu_coregroup_map
  [S390] fix clock comparator save area usage
  [S390] Add hwcap flag for the etf3 enhancement facility
  [S390] Ensure that ipl panic notifier is called late.
  [S390] fix dfp elf hwcap/facility bit detection
  [S390] smp: perform initial cpu reset before starting a cpu
  [S390] smp: fix memory leak on __cpu_up
  [S390] ipl: Improve checking logic and remove switch defaults.
  [S390] s390dbf: Remove needless check for NULL pointer.
  [S390] s390dbf: Remove redundant initilizations.
  [S390] use kzfree()
  [S390] BUG to BUG_ON changes
  [S390] zfcpdump: Prevent zcore from beeing built as a kernel module.
  [S390] Use csum_partial in checksum.h
  [S390] cleanup lowcore.h
  [S390] eliminate ipl_device from lowcore
  ...

1 files changed, 460 insertions, 411 deletions

diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index d82aad5224f0..27991b692056 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -7,6 +7,8 @@
  *
  */
 
+#define KMSG_COMPONENT "dasd"
+
 #include <linux/timer.h>
 #include <linux/slab.h>
 #include <asm/idals.h>
@@ -75,7 +77,7 @@ dasd_3990_erp_block_queue(struct dasd_ccw_req * erp, int expires)
 	struct dasd_device *device = erp->startdev;
 	unsigned long flags;
 
-	DEV_MESSAGE(KERN_INFO, device,
+	DBF_DEV_EVENT(DBF_INFO, device,
 		    "blocking request queue for %is", expires/HZ);
 
 	spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
@@ -114,9 +116,9 @@ dasd_3990_erp_int_req(struct dasd_ccw_req * erp)
 	} else {
 
 		/* issue a message and wait for 'device ready' interrupt */
-		DEV_MESSAGE(KERN_ERR, device, "%s",
+		dev_err(&device->cdev->dev,
 			    "is offline or not installed - "
-			    "INTERVENTION REQUIRED!!");
+			    "INTERVENTION REQUIRED!!\n");
 
 		dasd_3990_erp_block_queue(erp, 60*HZ);
 	}
@@ -158,7 +160,7 @@ dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp)
 
 	if ((erp->lpm & opm) != 0x00) {
 
-		DEV_MESSAGE(KERN_DEBUG, device,
+		DBF_DEV_EVENT(DBF_WARNING, device,
 			    "try alternate lpm=%x (lpum=%x / opm=%x)",
 			    erp->lpm, erp->irb.esw.esw0.sublog.lpum, opm);
 
@@ -166,10 +168,9 @@ dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp)
 		erp->status = DASD_CQR_FILLED;
 		erp->retries = 10;
 	} else {
-		DEV_MESSAGE(KERN_ERR, device,
-			    "No alternate channel path left (lpum=%x / "
-			    "opm=%x) -> permanent error",
-			    erp->irb.esw.esw0.sublog.lpum, opm);
+		dev_err(&device->cdev->dev,
+			"The DASD cannot be reached on any path (lpum=%x"
+			"/opm=%x)\n", erp->irb.esw.esw0.sublog.lpum, opm);
 
 		/* post request with permanent error */
 		erp->status = DASD_CQR_FAILED;
@@ -204,8 +205,8 @@ dasd_3990_erp_DCTL(struct dasd_ccw_req * erp, char modifier)
 					  sizeof(struct DCTL_data),
 					  device);
 	if (IS_ERR(dctl_cqr)) {
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "Unable to allocate DCTL-CQR");
+		dev_err(&device->cdev->dev,
+			    "Unable to allocate DCTL-CQR\n");
 		erp->status = DASD_CQR_FAILED;
 		return erp;
 	}
@@ -294,7 +295,7 @@ dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense)
 	/* interrupt (this enables easier enqueing of the cqr)	    */
 	if (erp->function != dasd_3990_erp_action_4) {
 
-		DEV_MESSAGE(KERN_INFO, device, "%s",
+		DBF_DEV_EVENT(DBF_INFO, device, "%s",
 			    "dasd_3990_erp_action_4: first time retry");
 
 		erp->retries = 256;
@@ -303,7 +304,7 @@ dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense)
 	} else {
 		if (sense && (sense[25] == 0x1D)) { /* state change pending */
 
-			DEV_MESSAGE(KERN_INFO, device,
+			DBF_DEV_EVENT(DBF_INFO, device,
 				    "waiting for state change pending "
 				    "interrupt, %d retries left",
 				    erp->retries);
@@ -311,15 +312,14 @@ dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense)
 			dasd_3990_erp_block_queue(erp, 30*HZ);
 
 		} else if (sense && (sense[25] == 0x1E)) {	/* busy */
-			DEV_MESSAGE(KERN_INFO, device,
+			DBF_DEV_EVENT(DBF_INFO, device,
 				    "busy - redriving request later, "
 				    "%d retries left",
 				    erp->retries);
                         dasd_3990_erp_block_queue(erp, HZ);
 		} else {
-
 			/* no state change pending - retry */
-			DEV_MESSAGE (KERN_INFO, device,
+			DBF_DEV_EVENT(DBF_INFO, device,
 				     "redriving request immediately, "
 				     "%d retries left",
 				     erp->retries);
@@ -384,6 +384,7 @@ dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
 	struct dasd_device *device = erp->startdev;
 	char msg_format = (sense[7] & 0xF0);
 	char msg_no = (sense[7] & 0x0F);
+	char errorstring[ERRORLENGTH];
 
 	switch (msg_format) {
 	case 0x00:		/* Format 0 - Program or System Checks */
@@ -394,95 +395,97 @@ dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
 			case 0x00:	/* No Message */
 				break;
 			case 0x01:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Invalid Command");
+				dev_warn(&device->cdev->dev,
+					    "FORMAT 0 - Invalid Command\n");
 				break;
 			case 0x02:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Invalid Command "
-					    "Sequence");
+					    "Sequence\n");
 				break;
 			case 0x03:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - CCW Count less than "
-					    "required");
+					    "required\n");
 				break;
 			case 0x04:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Invalid Parameter");
+				dev_warn(&device->cdev->dev,
+					    "FORMAT 0 - Invalid Parameter\n");
 				break;
 			case 0x05:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Diagnostic of Sepecial"
-					    " Command Violates File Mask");
+				dev_warn(&device->cdev->dev,
+					    "FORMAT 0 - Diagnostic of Special"
+					    " Command Violates File Mask\n");
 				break;
 			case 0x07:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Channel Returned with "
-					    "Incorrect retry CCW");
+					    "Incorrect retry CCW\n");
 				break;
 			case 0x08:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Reset Notification");
+				dev_warn(&device->cdev->dev,
+					    "FORMAT 0 - Reset Notification\n");
 				break;
 			case 0x09:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Storage Path Restart");
+				dev_warn(&device->cdev->dev,
+					 "FORMAT 0 - Storage Path Restart\n");
 				break;
 			case 0x0A:
-				DEV_MESSAGE(KERN_WARNING, device,
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Channel requested "
-					    "... %02x", sense[8]);
+					    "... %02x\n", sense[8]);
 				break;
 			case 0x0B:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Invalid Defective/"
-					    "Alternate Track Pointer");
+					    "Alternate Track Pointer\n");
 				break;
 			case 0x0C:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - DPS Installation "
-					    "Check");
+					    "Check\n");
 				break;
 			case 0x0E:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Command Invalid on "
-					    "Secondary Address");
+					    "Secondary Address\n");
 				break;
 			case 0x0F:
-				DEV_MESSAGE(KERN_WARNING, device,
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Status Not As "
-					    "Required: reason %02x", sense[8]);
+					    "Required: reason %02x\n",
+					 sense[8]);
 				break;
 			default:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Reseved");
+				dev_warn(&device->cdev->dev,
+					    "FORMAT 0 - Reserved\n");
 			}
 		} else {
 			switch (msg_no) {
 			case 0x00:	/* No Message */
 				break;
 			case 0x01:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Device Error Source");
+				dev_warn(&device->cdev->dev,
+					 "FORMAT 0 - Device Error "
+					 "Source\n");
 				break;
 			case 0x02:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Reserved");
+				dev_warn(&device->cdev->dev,
+					    "FORMAT 0 - Reserved\n");
 				break;
 			case 0x03:
-				DEV_MESSAGE(KERN_WARNING, device,
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Device Fenced - "
-					    "device = %02x", sense[4]);
+					    "device = %02x\n", sense[4]);
 				break;
 			case 0x04:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
+				dev_warn(&device->cdev->dev,
 					    "FORMAT 0 - Data Pinned for "
-					    "Device");
+					    "Device\n");
 				break;
 			default:
-				DEV_MESSAGE(KERN_WARNING, device, "%s",
-					    "FORMAT 0 - Reserved");
+				dev_warn(&device->cdev->dev,
+					    "FORMAT 0 - Reserved\n");
 			}
 		}
 		break;
@@ -492,348 +495,352 @@ dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
 		case 0x00:	/* No Message */
 			break;
 		case 0x01:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 1 - Device Status 1 not as "
-				    "expected");
+				    "expected\n");
 			break;
 		case 0x03:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Index missing");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 1 - Index missing\n");
 			break;
 		case 0x04:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Interruption cannot be reset");
+			dev_warn(&device->cdev->dev,
+				 "FORMAT 1 - Interruption cannot be "
+				 "reset\n");
 			break;
 		case 0x05:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 1 - Device did not respond to "
-				    "selection");
+				    "selection\n");
 			break;
 		case 0x06:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 1 - Device check-2 error or Set "
-				    "Sector is not complete");
+				    "Sector is not complete\n");
 			break;
 		case 0x07:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 1 - Head address does not "
-				    "compare");
+				    "compare\n");
 			break;
 		case 0x08:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Device status 1 not valid");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 1 - Device status 1 not valid\n");
 			break;
 		case 0x09:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Device not ready");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 1 - Device not ready\n");
 			break;
 		case 0x0A:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 1 - Track physical address did "
-				    "not compare");
+				    "not compare\n");
 			break;
 		case 0x0B:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Missing device address bit");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 1 - Missing device address bit\n");
 			break;
 		case 0x0C:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Drive motor switch is off");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 1 - Drive motor switch is off\n");
 			break;
 		case 0x0D:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Seek incomplete");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 1 - Seek incomplete\n");
 			break;
 		case 0x0E:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 1 - Cylinder address did not "
-				    "compare");
+				    "compare\n");
 			break;
 		case 0x0F:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 1 - Offset active cannot be "
-				    "reset");
+				    "reset\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 1 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 1 - Reserved\n");
 		}
 		break;
 
 	case 0x20:		/* Format 2 - 3990 Equipment Checks */
 		switch (msg_no) {
 		case 0x08:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 2 - 3990 check-2 error");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 2 - 3990 check-2 error\n");
 			break;
 		case 0x0E:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 2 - Support facility errors");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 2 - Support facility errors\n");
 			break;
 		case 0x0F:
-			DEV_MESSAGE(KERN_WARNING, device,
-				    "FORMAT 2 - Microcode detected error %02x",
-				    sense[8]);
+			dev_warn(&device->cdev->dev,
+				 "FORMAT 2 - Microcode detected error "
+				 "%02x\n",
+				 sense[8]);
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 2 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 2 - Reserved\n");
 		}
 		break;
 
 	case 0x30:		/* Format 3 - 3990 Control Checks */
 		switch (msg_no) {
 		case 0x0F:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 3 - Allegiance terminated");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 3 - Allegiance terminated\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 3 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 3 - Reserved\n");
 		}
 		break;
 
 	case 0x40:		/* Format 4 - Data Checks */
 		switch (msg_no) {
 		case 0x00:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 4 - Home address area error");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 4 - Home address area error\n");
 			break;
 		case 0x01:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 4 - Count area error");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 4 - Count area error\n");
 			break;
 		case 0x02:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 4 - Key area error");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 4 - Key area error\n");
 			break;
 		case 0x03:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 4 - Data area error");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 4 - Data area error\n");
 			break;
 		case 0x04:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - No sync byte in home address "
-				    "area");
+				    "area\n");
 			break;
 		case 0x05:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - No sync byte in count address "
-				    "area");
+				    "area\n");
 			break;
 		case 0x06:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 4 - No sync byte in key area");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 4 - No sync byte in key area\n");
 			break;
 		case 0x07:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 4 - No sync byte in data area");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 4 - No sync byte in data area\n");
 			break;
 		case 0x08:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - Home address area error; "
-				    "offset active");
+				    "offset active\n");
 			break;
 		case 0x09:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - Count area error; offset "
-				    "active");
+				    "active\n");
 			break;
 		case 0x0A:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - Key area error; offset "
-				    "active");
+				    "active\n");
 			break;
 		case 0x0B:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - Data area error; "
-				    "offset active");
+				    "offset active\n");
 			break;
 		case 0x0C:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - No sync byte in home "
-				    "address area; offset active");
+				    "address area; offset active\n");
 			break;
 		case 0x0D:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - No syn byte in count "
-				    "address area; offset active");
+				    "address area; offset active\n");
 			break;
 		case 0x0E:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - No sync byte in key area; "
-				    "offset active");
+				    "offset active\n");
 			break;
 		case 0x0F:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 4 - No syn byte in data area; "
-				    "offset active");
+				    "offset active\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 4 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 4 - Reserved\n");
 		}
 		break;
 
 	case 0x50:  /* Format 5 - Data Check with displacement information */
 		switch (msg_no) {
 		case 0x00:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 5 - Data Check in the "
-				    "home address area");
+				    "home address area\n");
 			break;
 		case 0x01:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 5 - Data Check in the count area");
+			dev_warn(&device->cdev->dev,
+				 "FORMAT 5 - Data Check in the count "
+				 "area\n");
 			break;
 		case 0x02:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 5 - Data Check in the key area");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 5 - Data Check in the key area\n");
 			break;
 		case 0x03:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 5 - Data Check in the data area");
+			dev_warn(&device->cdev->dev,
+				 "FORMAT 5 - Data Check in the data "
+				 "area\n");
 			break;
 		case 0x08:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 5 - Data Check in the "
-				    "home address area; offset active");
+				    "home address area; offset active\n");
 			break;
 		case 0x09:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 5 - Data Check in the count area; "
-				    "offset active");
+				    "offset active\n");
 			break;
 		case 0x0A:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 5 - Data Check in the key area; "
-				    "offset active");
+				    "offset active\n");
 			break;
 		case 0x0B:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 5 - Data Check in the data area; "
-				    "offset active");
+				    "offset active\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 5 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 5 - Reserved\n");
 		}
 		break;
 
 	case 0x60:  /* Format 6 - Usage Statistics/Overrun Errors */
 		switch (msg_no) {
 		case 0x00:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel A");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel A\n");
 			break;
 		case 0x01:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel B");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel B\n");
 			break;
 		case 0x02:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel C");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel C\n");
 			break;
 		case 0x03:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel D");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel D\n");
 			break;
 		case 0x04:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel E");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel E\n");
 			break;
 		case 0x05:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel F");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel F\n");
 			break;
 		case 0x06:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel G");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel G\n");
 			break;
 		case 0x07:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Overrun on channel H");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Overrun on channel H\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 6 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 6 - Reserved\n");
 		}
 		break;
 
 	case 0x70:  /* Format 7 - Device Connection Control Checks */
 		switch (msg_no) {
 		case 0x00:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - RCC initiated by a connection "
-				    "check alert");
+				    "check alert\n");
 			break;
 		case 0x01:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - RCC 1 sequence not "
-				    "successful");
+				    "successful\n");
 			break;
 		case 0x02:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - RCC 1 and RCC 2 sequences not "
-				    "successful");
+				    "successful\n");
 			break;
 		case 0x03:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - Invalid tag-in during "
-				    "selection sequence");
+				    "selection sequence\n");
 			break;
 		case 0x04:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 7 - extra RCC required");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 7 - extra RCC required\n");
 			break;
 		case 0x05:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - Invalid DCC selection "
-				    "response or timeout");
+				    "response or timeout\n");
 			break;
 		case 0x06:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - Missing end operation; device "
-				    "transfer complete");
+				    "transfer complete\n");
 			break;
 		case 0x07:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - Missing end operation; device "
-				    "transfer incomplete");
+				    "transfer incomplete\n");
 			break;
 		case 0x08:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - Invalid tag-in for an "
-				    "immediate command sequence");
+				    "immediate command sequence\n");
 			break;
 		case 0x09:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - Invalid tag-in for an "
-				    "extended command sequence");
+				    "extended command sequence\n");
 			break;
 		case 0x0A:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - 3990 microcode time out when "
-				    "stopping selection");
+				    "stopping selection\n");
 			break;
 		case 0x0B:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - No response to selection "
-				    "after a poll interruption");
+				    "after a poll interruption\n");
 			break;
 		case 0x0C:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - Permanent path error (DASD "
-				    "controller not available)");
+				    "controller not available)\n");
 			break;
 		case 0x0D:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 7 - DASD controller not available"
-				    " on disconnected command chain");
+				    " on disconnected command chain\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 7 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 7 - Reserved\n");
 		}
 		break;
 
@@ -841,52 +848,52 @@ dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
 		switch (msg_no) {
 		case 0x00:	/* No Message */
 		case 0x01:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - Error correction code "
-				    "hardware fault");
+				    "hardware fault\n");
 			break;
 		case 0x03:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - Unexpected end operation "
-				    "response code");
+				    "response code\n");
 			break;
 		case 0x04:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - End operation with transfer "
-				    "count not zero");
+				    "count not zero\n");
 			break;
 		case 0x05:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - End operation with transfer "
-				    "count zero");
+				    "count zero\n");
 			break;
 		case 0x06:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - DPS checks after a system "
-				    "reset or selective reset");
+				    "reset or selective reset\n");
 			break;
 		case 0x07:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 8 - DPS cannot be filled");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 8 - DPS cannot be filled\n");
 			break;
 		case 0x08:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - Short busy time-out during "
-				    "device selection");
+				    "device selection\n");
 			break;
 		case 0x09:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - DASD controller failed to "
-				    "set or reset the long busy latch");
+				    "set or reset the long busy latch\n");
 			break;
 		case 0x0A:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 8 - No interruption from device "
-				    "during a command chain");
+				    "during a command chain\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 8 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 8 - Reserved\n");
 		}
 		break;
 
@@ -895,97 +902,100 @@ dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
 		case 0x00:
 			break;	/* No Message */
 		case 0x06:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 9 - Device check-2 error");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 9 - Device check-2 error\n");
 			break;
 		case 0x07:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 9 - Head address did not compare");
+			dev_warn(&device->cdev->dev,
+				 "FORMAT 9 - Head address did not "
+				 "compare\n");
 			break;
 		case 0x0A:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 9 - Track physical address did "
-				    "not compare while oriented");
+				    "not compare while oriented\n");
 			break;
 		case 0x0E:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT 9 - Cylinder address did not "
-				    "compare");
+				    "compare\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT 9 - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT 9 - Reserved\n");
 		}
 		break;
 
 	case 0xF0:		/* Format F - Cache Storage Checks */
 		switch (msg_no) {
 		case 0x00:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - Operation Terminated");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - Operation Terminated\n");
 			break;
 		case 0x01:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - Subsystem Processing Error");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - Subsystem Processing Error\n");
 			break;
 		case 0x02:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT F - Cache or nonvolatile storage "
-				    "equipment failure");
+				    "equipment failure\n");
 			break;
 		case 0x04:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - Caching terminated");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - Caching terminated\n");
 			break;
 		case 0x06:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT F - Cache fast write access not "
-				    "authorized");
+				    "authorized\n");
 			break;
 		case 0x07:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - Track format incorrect");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - Track format incorrect\n");
 			break;
 		case 0x09:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - Caching reinitiated");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - Caching reinitiated\n");
 			break;
 		case 0x0A:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT F - Nonvolatile storage "
-				    "terminated");
+				    "terminated\n");
 			break;
 		case 0x0B:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - Volume is suspended duplex");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - Volume is suspended duplex\n");
 			/* call extended error reporting (EER) */
 			dasd_eer_write(device, erp->refers,
 				       DASD_EER_PPRCSUSPEND);
 			break;
 		case 0x0C:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - Subsystem status connot be "
-				    "determined");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - Subsystem status cannot be "
+				    "determined\n");
 			break;
 		case 0x0D:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
+			dev_warn(&device->cdev->dev,
 				    "FORMAT F - Caching status reset to "
-				    "default");
+				    "default\n");
 			break;
 		case 0x0E:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT F - DASD Fast Write inhibited");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT F - DASD Fast Write inhibited\n");
 			break;
 		default:
-			DEV_MESSAGE(KERN_WARNING, device, "%s",
-				    "FORMAT D - Reserved");
+			dev_warn(&device->cdev->dev,
+				    "FORMAT D - Reserved\n");
 		}
 		break;
 
-	default:	/* unknown message format - should not happen */
-	        DEV_MESSAGE (KERN_WARNING, device,
-                             "unknown message format %02x",
-                             msg_format);
+	default:	/* unknown message format - should not happen
+			   internal error 03 - unknown message format */
+		snprintf(errorstring, ERRORLENGTH, "03 %x02", msg_format);
+		dev_err(&device->cdev->dev,
+			 "An error occurred in the DASD device driver, "
+			 "reason=%s\n", errorstring);
 		break;
 	}			/* end switch message format */
 
@@ -1015,7 +1025,7 @@ dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense)
 	/* env data present (ACTION 10 - retry should work) */
 	if (sense[2] & SNS2_ENV_DATA_PRESENT) {
 
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Command Reject - environmental data present");
 
 		dasd_3990_handle_env_data(erp, sense);
@@ -1023,9 +1033,10 @@ dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense)
 		erp->retries = 5;
 
 	} else {
-		/* fatal error -  set status to FAILED */
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "Command Reject - Fatal error");
+		/* fatal error -  set status to FAILED
+		   internal error 09 - Command Reject */
+		dev_err(&device->cdev->dev, "An error occurred in the DASD "
+			"device driver, reason=%s\n", "09");
 
 		erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 	}
@@ -1061,7 +1072,7 @@ dasd_3990_erp_bus_out(struct dasd_ccw_req * erp)
 	} else {
 
 		/* issue a message and wait for 'device ready' interrupt */
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "bus out parity error or BOPC requested by "
 			    "channel");
 
@@ -1093,21 +1104,19 @@ dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense)
 	erp->function = dasd_3990_erp_equip_check;
 
 	if (sense[1] & SNS1_WRITE_INHIBITED) {
+		dev_info(&device->cdev->dev,
+			    "Write inhibited path encountered\n");
 
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
-			    "Write inhibited path encountered");
-
-		/* vary path offline */
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "Path should be varied off-line. "
-			    "This is not implemented yet \n - please report "
-			    "to linux390@de.ibm.com");
+		/* vary path offline
+		   internal error 04 - Path should be varied off-line.*/
+		dev_err(&device->cdev->dev, "An error occurred in the DASD "
+			"device driver, reason=%s\n", "04");
 
 		erp = dasd_3990_erp_action_1(erp);
 
 	} else if (sense[2] & SNS2_ENV_DATA_PRESENT) {
 
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Equipment Check - " "environmental data present");
 
 		dasd_3990_handle_env_data(erp, sense);
@@ -1116,7 +1125,7 @@ dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense)
 
 	} else if (sense[1] & SNS1_PERM_ERR) {
 
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Equipment Check - retry exhausted or "
 			    "undesirable");
 
@@ -1125,7 +1134,7 @@ dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense)
 	} else {
 		/* all other equipment checks - Action 5 */
 		/* rest is done when retries == 0 */
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Equipment check or processing error");
 
 		erp = dasd_3990_erp_action_5(erp);
@@ -1156,9 +1165,9 @@ dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense)
 	if (sense[2] & SNS2_CORRECTABLE) {	/* correctable data check */
 
 		/* issue message that the data has been corrected */
-		DEV_MESSAGE(KERN_EMERG, device, "%s",
+		dev_emerg(&device->cdev->dev,
 			    "Data recovered during retry with PCI "
-			    "fetch mode active");
+			    "fetch mode active\n");
 
 		/* not possible to handle this situation in Linux */
 		panic("No way to inform application about the possibly "
@@ -1166,7 +1175,7 @@ dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense)
 
 	} else if (sense[2] & SNS2_ENV_DATA_PRESENT) {
 
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Uncorrectable data check recovered secondary "
 			    "addr of duplex pair");
 
@@ -1174,7 +1183,7 @@ dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense)
 
 	} else if (sense[1] & SNS1_PERM_ERR) {
 
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Uncorrectable data check with internal "
 			    "retry exhausted");
 
@@ -1182,7 +1191,7 @@ dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense)
 
 	} else {
 		/* all other data checks */
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Uncorrectable data check with retry count "
 			    "exhausted...");
 
@@ -1212,7 +1221,7 @@ dasd_3990_erp_overrun(struct dasd_ccw_req * erp, char *sense)
 
 	erp->function = dasd_3990_erp_overrun;
 
-	DEV_MESSAGE(KERN_DEBUG, device, "%s",
+	DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 		    "Overrun - service overrun or overrun"
 		    " error requested by channel");
 
@@ -1243,7 +1252,7 @@ dasd_3990_erp_inv_format(struct dasd_ccw_req * erp, char *sense)
 
 	if (sense[2] & SNS2_ENV_DATA_PRESENT) {
 
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Track format error when destaging or "
 			    "staging data");
 
@@ -1252,8 +1261,10 @@ dasd_3990_erp_inv_format(struct dasd_ccw_req * erp, char *sense)
 		erp = dasd_3990_erp_action_4(erp, sense);
 
 	} else {
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "Invalid Track Format - Fatal error");
+		/* internal error 06 - The track format is not valid*/
+		dev_err(&device->cdev->dev,
+			"An error occurred in the DASD device driver, "
+			"reason=%s\n", "06");
 
 		erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 	}
@@ -1279,8 +1290,8 @@ dasd_3990_erp_EOC(struct dasd_ccw_req * default_erp, char *sense)
 
 	struct dasd_device *device = default_erp->startdev;
 
-	DEV_MESSAGE(KERN_ERR, device, "%s",
-		    "End-of-Cylinder - must never happen");
+	dev_err(&device->cdev->dev,
+		"The cylinder data for accessing the DASD is inconsistent\n");
 
 	/* implement action 7 - BUG */
 	return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
@@ -1306,7 +1317,7 @@ dasd_3990_erp_env_data(struct dasd_ccw_req * erp, char *sense)
 
 	erp->function = dasd_3990_erp_env_data;
 
-	DEV_MESSAGE(KERN_DEBUG, device, "%s", "Environmental data present");
+	DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Environmental data present");
 
 	dasd_3990_handle_env_data(erp, sense);
 
@@ -1339,8 +1350,8 @@ dasd_3990_erp_no_rec(struct dasd_ccw_req * default_erp, char *sense)
 
 	struct dasd_device *device = default_erp->startdev;
 
-	DEV_MESSAGE(KERN_ERR, device, "%s",
-		    "No Record Found - Fatal error ");
+	dev_err(&device->cdev->dev,
+		    "The specified record was not found\n");
 
 	return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
 
@@ -1365,7 +1376,8 @@ dasd_3990_erp_file_prot(struct dasd_ccw_req * erp)
 
 	struct dasd_device *device = erp->startdev;
 
-	DEV_MESSAGE(KERN_ERR, device, "%s", "File Protected");
+	dev_err(&device->cdev->dev, "Accessing the DASD failed because of "
+		"a hardware error\n");
 
 	return dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 
@@ -1394,7 +1406,7 @@ static struct dasd_ccw_req *dasd_3990_erp_inspect_alias(
 	if (cqr->block &&
 	    (cqr->block->base != cqr->startdev)) {
 		if (cqr->startdev->features & DASD_FEATURE_ERPLOG) {
-			DEV_MESSAGE(KERN_ERR, cqr->startdev,
+			DBF_DEV_EVENT(DBF_ERR, cqr->startdev,
 				    "ERP on alias device for request %p,"
 				    " recover on base device %s", cqr,
 				    dev_name(&cqr->block->base->cdev->dev));
@@ -1511,7 +1523,7 @@ dasd_3990_erp_action_10_32(struct dasd_ccw_req * erp, char *sense)
 	erp->retries = 256;
 	erp->function = dasd_3990_erp_action_10_32;
 
-	DEV_MESSAGE(KERN_DEBUG, device, "%s", "Perform logging requested");
+	DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Perform logging requested");
 
 	return erp;
 
@@ -1549,7 +1561,7 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
 	char *LO_data;		/* LO_eckd_data_t */
 	struct ccw1 *ccw, *oldccw;
 
-	DEV_MESSAGE(KERN_DEBUG, device, "%s",
+	DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 		    "Write not finished because of unexpected condition");
 
 	default_erp->function = dasd_3990_erp_action_1B_32;
@@ -1561,10 +1573,16 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
 		cqr = cqr->refers;
 	}
 
+	if (scsw_is_tm(&cqr->irb.scsw)) {
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
+			      "32 bit sense, action 1B is not defined"
+			      " in transport mode - just retry");
+		return default_erp;
+	}
+
 	/* for imprecise ending just do default erp */
 	if (sense[1] & 0x01) {
-
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Imprecise ending is set - just retry");
 
 		return default_erp;
@@ -1575,8 +1593,7 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
 	cpa = default_erp->refers->irb.scsw.cmd.cpa;
 
 	if (cpa == 0) {
-
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Unable to determine address of the CCW "
 			    "to be restarted");
 
@@ -1590,7 +1607,9 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
 				     sizeof(struct LO_eckd_data), device);
 
 	if (IS_ERR(erp)) {
-		DEV_MESSAGE(KERN_ERR, device, "%s", "Unable to allocate ERP");
+		/* internal error 01 - Unable to allocate ERP */
+		dev_err(&device->cdev->dev, "An error occurred in the DASD "
+			"device driver, reason=%s\n", "01");
 		return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
 	}
 
@@ -1599,7 +1618,7 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
 	oldccw = cqr->cpaddr;
 	if (oldccw->cmd_code == DASD_ECKD_CCW_PFX) {
 		PFX_data = cqr->data;
-		memcpy(DE_data, &PFX_data->define_extend,
+		memcpy(DE_data, &PFX_data->define_extent,
 		       sizeof(struct DE_eckd_data));
 	} else
 		memcpy(DE_data, cqr->data, sizeof(struct DE_eckd_data));
@@ -1608,10 +1627,7 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
 	LO_data = erp->data + sizeof(struct DE_eckd_data);
 
 	if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) {
-
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "BUG - this should not happen");
-
+		/* should not */
 		return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
 	}
 
@@ -1701,7 +1717,7 @@ dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense)
 	char *LO_data;		/* struct LO_eckd_data */
 	struct ccw1 *ccw;
 
-	DEV_MESSAGE(KERN_DEBUG, device, "%s",
+	DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 		    "Write not finished because of unexpected condition"
 		    " - follow on");
 
@@ -1712,10 +1728,16 @@ dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense)
 		cqr = cqr->refers;
 	}
 
+	if (scsw_is_tm(&cqr->irb.scsw)) {
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
+			      "32 bit sense, action 1B, update,"
+			      " in transport mode - just retry");
+		return previous_erp;
+	}
+
 	/* for imprecise ending just do default erp */
 	if (sense[1] & 0x01) {
-
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "Imprecise ending is set - just retry");
 
 		previous_erp->status = DASD_CQR_FILLED;
@@ -1728,10 +1750,10 @@ dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense)
 	cpa = previous_erp->irb.scsw.cmd.cpa;
 
 	if (cpa == 0) {
-
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
-			    "Unable to determine address of the CCW "
-			    "to be restarted");
+		/* internal error 02 -
+		   Unable to determine address of the CCW to be restarted */
+		dev_err(&device->cdev->dev, "An error occurred in the DASD "
+			"device driver, reason=%s\n", "02");
 
 		previous_erp->status = DASD_CQR_FAILED;
 
@@ -1744,10 +1766,7 @@ dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense)
 	LO_data = erp->data + sizeof(struct DE_eckd_data);
 
 	if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) {
-
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "BUG - this should not happen");
-
+		/* should not happen */
 		previous_erp->status = DASD_CQR_FAILED;
 
 		return previous_erp;
@@ -1935,14 +1954,13 @@ dasd_3990_erp_compound_config(struct dasd_ccw_req * erp, char *sense)
 
 	if ((sense[25] & DASD_SENSE_BIT_1) && (sense[26] & DASD_SENSE_BIT_2)) {
 
-		/* set to suspended duplex state then restart */
+		/* set to suspended duplex state then restart
+		   internal error 05 - Set device to suspended duplex state
+		   should be done */
 		struct dasd_device *device = erp->startdev;
-
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "Set device to suspended duplex state should be "
-			    "done!\n"
-			    "This is not implemented yet (for compound ERP)"
-			    " - please report to linux390@de.ibm.com");
+		dev_err(&device->cdev->dev,
+			"An error occurred in the DASD device driver, "
+			"reason=%s\n", "05");
 
 	}
 
@@ -2012,15 +2030,14 @@ dasd_3990_erp_handle_sim(struct dasd_device *device, char *sense)
 {
 	/* print message according to log or message to operator mode */
 	if ((sense[24] & DASD_SIM_MSG_TO_OP) || (sense[1] & 0x10)) {
-
 		/* print SIM SRC from RefCode */
-		DEV_MESSAGE(KERN_ERR, device, "SIM - SRC: "
-			    "%02x%02x%02x%02x", sense[22],
+		dev_err(&device->cdev->dev, "SIM - SRC: "
+			    "%02x%02x%02x%02x\n", sense[22],
 			    sense[23], sense[11], sense[12]);
 	} else if (sense[24] & DASD_SIM_LOG) {
 		/* print SIM SRC Refcode */
-		DEV_MESSAGE(KERN_WARNING, device, "SIM - SRC: "
-			    "%02x%02x%02x%02x", sense[22],
+		dev_warn(&device->cdev->dev, "log SIM - SRC: "
+			    "%02x%02x%02x%02x\n", sense[22],
 			    sense[23], sense[11], sense[12]);
 	}
 }
@@ -2063,14 +2080,14 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
 		switch (sense[25]) {
 
 		case 0x00:	/* success - use default ERP for retries */
-		        DEV_MESSAGE(KERN_DEBUG, device, "%s",
+			DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
 				    "ERP called for successful request"
 				    " - just retry");
 			break;
 
 		case 0x01:	/* fatal error */
-			DEV_MESSAGE(KERN_ERR, device, "%s",
-				    "Retry not recommended - Fatal error");
+			dev_err(&device->cdev->dev,
+				    "ERP failed for the DASD\n");
 
 			erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 			break;
@@ -2080,13 +2097,10 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
 			erp = dasd_3990_erp_int_req(erp);
 			break;
 
-		case 0x0F:  /* length mismatch during update write command */
-			DEV_MESSAGE(KERN_ERR, device, "%s",
-				    "update write command error - should not "
-				    "happen;\n"
-				    "Please send this message together with "
-				    "the above sense data to linux390@de."
-				    "ibm.com");
+		case 0x0F:  /* length mismatch during update write command
+			       internal error 08 - update write command error*/
+			dev_err(&device->cdev->dev, "An error occurred in the "
+				"DASD device driver, reason=%s\n", "08");
 
 			erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 			break;
@@ -2095,13 +2109,12 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
 			erp = dasd_3990_erp_action_10_32(erp, sense);
 			break;
 
-		case 0x15:	/* next track outside defined extend */
-			DEV_MESSAGE(KERN_ERR, device, "%s",
-				    "next track outside defined extend - "
-				    "should not happen;\n"
-				    "Please send this message together with "
-				    "the above sense data to linux390@de."
-				    "ibm.com");
+		case 0x15:	/* next track outside defined extend
+				   internal error 07 - The next track is not
+				   within the defined storage extent */
+			dev_err(&device->cdev->dev,
+				"An error occurred in the DASD device driver, "
+				"reason=%s\n", "07");
 
 			erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 			break;
@@ -2112,9 +2125,9 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
 			break;
 
 		case 0x1C:	/* invalid data */
-			DEV_MESSAGE(KERN_EMERG, device, "%s",
+			dev_emerg(&device->cdev->dev,
 				    "Data recovered during retry with PCI "
-				    "fetch mode active");
+				    "fetch mode active\n");
 
 			/* not possible to handle this situation in Linux */
 			panic
@@ -2123,7 +2136,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
 			break;
 
 		case 0x1D:	/* state-change pending */
-			DEV_MESSAGE(KERN_DEBUG, device, "%s",
+			DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 				    "A State change pending condition exists "
 				    "for the subsystem or device");
 
@@ -2131,7 +2144,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
 			break;
 
 		case 0x1E:	/* busy */
-                        DEV_MESSAGE(KERN_DEBUG, device, "%s",
+			DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 				    "Busy condition exists "
 				    "for the subsystem or device");
                         erp = dasd_3990_erp_action_4(erp, sense);
@@ -2171,9 +2184,9 @@ dasd_3990_erp_control_check(struct dasd_ccw_req *erp)
 {
 	struct dasd_device *device = erp->startdev;
 
-	if (erp->refers->irb.scsw.cmd.cstat & (SCHN_STAT_INTF_CTRL_CHK
+	if (scsw_cstat(&erp->refers->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK
 					   | SCHN_STAT_CHN_CTRL_CHK)) {
-		DEV_MESSAGE(KERN_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			    "channel or interface control check");
 		erp = dasd_3990_erp_action_4(erp, NULL);
 	}
@@ -2193,21 +2206,23 @@ dasd_3990_erp_control_check(struct dasd_ccw_req *erp)
  *   erp_new		contens was possibly modified
  */
 static struct dasd_ccw_req *
-dasd_3990_erp_inspect(struct dasd_ccw_req * erp)
+dasd_3990_erp_inspect(struct dasd_ccw_req *erp)
 {
 
 	struct dasd_ccw_req *erp_new = NULL;
-	/* sense data are located in the refers record of the */
-	/* already set up new ERP !			      */
-	char *sense = erp->refers->irb.ecw;
+	char *sense;
 
 	/* if this problem occured on an alias retry on base */
 	erp_new = dasd_3990_erp_inspect_alias(erp);
 	if (erp_new)
 		return erp_new;
 
-	/* check if no concurrent sens is available */
-	if (!erp->refers->irb.esw.esw0.erw.cons)
+	/* sense data are located in the refers record of the
+	 * already set up new ERP !
+	 * check if concurrent sens is available
+	 */
+	sense = dasd_get_sense(&erp->refers->irb);
+	if (!sense)
 		erp_new = dasd_3990_erp_control_check(erp);
 	/* distinguish between 24 and 32 byte sense data */
 	else if (sense[27] & DASD_SENSE_BIT_0) {
@@ -2231,7 +2246,11 @@ dasd_3990_erp_inspect(struct dasd_ccw_req * erp)
  * DESCRIPTION
  *   This funtion adds an additional request block (ERP) to the head of
  *   the given cqr (or erp).
- *   This erp is initialized as an default erp (retry TIC)
+ *   For a command mode cqr the erp is initialized as an default erp
+ *   (retry TIC).
+ *   For transport mode we make a copy of the original TCW (points to
+ *   the original TCCB, TIDALs, etc.) but give it a fresh
+ *   TSB so the original sense data will not be changed.
  *
  * PARAMETER
  *   cqr		head of the current ERP-chain (or single cqr if
@@ -2239,25 +2258,35 @@ dasd_3990_erp_inspect(struct dasd_ccw_req * erp)
  * RETURN VALUES
  *   erp		pointer to new ERP-chain head
  */
-static struct dasd_ccw_req *
-dasd_3990_erp_add_erp(struct dasd_ccw_req * cqr)
+static struct dasd_ccw_req *dasd_3990_erp_add_erp(struct dasd_ccw_req *cqr)
 {
 
 	struct dasd_device *device = cqr->startdev;
 	struct ccw1 *ccw;
-
-	/* allocate additional request block */
 	struct dasd_ccw_req *erp;
+	int cplength, datasize;
+	struct tcw *tcw;
+	struct tsb *tsb;
+
+	if (cqr->cpmode == 1) {
+		cplength = 0;
+		datasize = sizeof(struct tcw) + sizeof(struct tsb);
+	} else {
+		cplength = 2;
+		datasize = 0;
+	}
 
-	erp = dasd_alloc_erp_request((char *) &cqr->magic, 2, 0, device);
+	/* allocate additional request block */
+	erp = dasd_alloc_erp_request((char *) &cqr->magic,
+				     cplength, datasize, device);
 	if (IS_ERR(erp)) {
                 if (cqr->retries <= 0) {
-		        DEV_MESSAGE(KERN_ERR, device, "%s",
+			DBF_DEV_EVENT(DBF_ERR, device, "%s",
 				    "Unable to allocate ERP request");
 			cqr->status = DASD_CQR_FAILED;
                         cqr->stopclk = get_clock ();
 		} else {
-                        DEV_MESSAGE (KERN_ERR, device,
+			DBF_DEV_EVENT(DBF_ERR, device,
                                      "Unable to allocate ERP request "
 				     "(%i retries left)",
                                      cqr->retries);
@@ -2266,13 +2295,24 @@ dasd_3990_erp_add_erp(struct dasd_ccw_req * cqr)
 		return cqr;
 	}
 
-	/* initialize request with default TIC to current ERP/CQR */
-	ccw = erp->cpaddr;
-	ccw->cmd_code = CCW_CMD_NOOP;
-	ccw->flags = CCW_FLAG_CC;
-	ccw++;
-	ccw->cmd_code = CCW_CMD_TIC;
-	ccw->cda      = (long)(cqr->cpaddr);
+	if (cqr->cpmode == 1) {
+		/* make a shallow copy of the original tcw but set new tsb */
+		erp->cpmode = 1;
+		erp->cpaddr = erp->data;
+		tcw = erp->data;
+		tsb = (struct tsb *) &tcw[1];
+		*tcw = *((struct tcw *)cqr->cpaddr);
+		tcw->tsb = (long)tsb;
+	} else {
+		/* initialize request with default TIC to current ERP/CQR */
+		ccw = erp->cpaddr;
+		ccw->cmd_code = CCW_CMD_NOOP;
+		ccw->flags = CCW_FLAG_CC;
+		ccw++;
+		ccw->cmd_code = CCW_CMD_TIC;
+		ccw->cda      = (long)(cqr->cpaddr);
+	}
+
 	erp->function = dasd_3990_erp_add_erp;
 	erp->refers   = cqr;
 	erp->startdev = device;
@@ -2282,7 +2322,6 @@ dasd_3990_erp_add_erp(struct dasd_ccw_req * cqr)
 	erp->expires  = 0;
 	erp->retries  = 256;
 	erp->buildclk = get_clock();
-
 	erp->status = DASD_CQR_FILLED;
 
 	return erp;
@@ -2340,28 +2379,33 @@ dasd_3990_erp_additional_erp(struct dasd_ccw_req * cqr)
  *   match		'boolean' for match found
  *			returns 1 if match found, otherwise 0.
  */
-static int
-dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1, struct dasd_ccw_req *cqr2)
+static int dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1,
+				     struct dasd_ccw_req *cqr2)
 {
+	char *sense1, *sense2;
 
 	if (cqr1->startdev != cqr2->startdev)
 		return 0;
 
-	if (cqr1->irb.esw.esw0.erw.cons != cqr2->irb.esw.esw0.erw.cons)
-		return 0;
+	sense1 = dasd_get_sense(&cqr1->irb);
+	sense2 = dasd_get_sense(&cqr2->irb);
 
-	if ((cqr1->irb.esw.esw0.erw.cons == 0) &&
-	    (cqr2->irb.esw.esw0.erw.cons == 0))	{
-		if ((cqr1->irb.scsw.cmd.cstat & (SCHN_STAT_INTF_CTRL_CHK |
-					     SCHN_STAT_CHN_CTRL_CHK)) ==
-		    (cqr2->irb.scsw.cmd.cstat & (SCHN_STAT_INTF_CTRL_CHK |
-					     SCHN_STAT_CHN_CTRL_CHK)))
+	/* one request has sense data, the other not -> no match, return 0 */
+	if (!sense1 != !sense2)
+		return 0;
+	/* no sense data in both cases -> check cstat for IFCC */
+	if (!sense1 && !sense2)	{
+		if ((scsw_cstat(&cqr1->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK |
+						    SCHN_STAT_CHN_CTRL_CHK)) ==
+		    (scsw_cstat(&cqr2->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK |
+						    SCHN_STAT_CHN_CTRL_CHK)))
 			return 1; /* match with ifcc*/
 	}
 	/* check sense data; byte 0-2,25,27 */
-	if (!((memcmp (cqr1->irb.ecw, cqr2->irb.ecw, 3) == 0) &&
-	      (cqr1->irb.ecw[27] == cqr2->irb.ecw[27]) &&
-	      (cqr1->irb.ecw[25] == cqr2->irb.ecw[25]))) {
+	if (!(sense1 && sense2 &&
+	      (memcmp(sense1, sense2, 3) == 0) &&
+	      (sense1[27] == sense2[27]) &&
+	      (sense1[25] == sense2[25]))) {
 
 		return 0;	/* sense doesn't match */
 	}
@@ -2434,7 +2478,7 @@ dasd_3990_erp_further_erp(struct dasd_ccw_req *erp)
 {
 
 	struct dasd_device *device = erp->startdev;
-	char *sense = erp->irb.ecw;
+	char *sense = dasd_get_sense(&erp->irb);
 
 	/* check for 24 byte sense ERP */
 	if ((erp->function == dasd_3990_erp_bus_out) ||
@@ -2449,7 +2493,7 @@ dasd_3990_erp_further_erp(struct dasd_ccw_req *erp)
 		/* prepare erp for retry on different channel path */
 		erp = dasd_3990_erp_action_1(erp);
 
-		if (!(sense[2] & DASD_SENSE_BIT_0)) {
+		if (sense && !(sense[2] & DASD_SENSE_BIT_0)) {
 
 			/* issue a Diagnostic Control command with an
 			 * Inhibit Write subcommand */
@@ -2471,7 +2515,7 @@ dasd_3990_erp_further_erp(struct dasd_ccw_req *erp)
 					break;
 				}
 			default:
-				DEV_MESSAGE(KERN_DEBUG, device,
+				DBF_DEV_EVENT(DBF_WARNING, device,
 					    "invalid subcommand modifier 0x%x "
 					    "for Diagnostic Control Command",
 					    sense[25]);
@@ -2479,19 +2523,21 @@ dasd_3990_erp_further_erp(struct dasd_ccw_req *erp)
 		}
 
 		/* check for 32 byte sense ERP */
-	} else if ((erp->function == dasd_3990_erp_compound_retry) ||
-		   (erp->function == dasd_3990_erp_compound_path) ||
-		   (erp->function == dasd_3990_erp_compound_code) ||
-		   (erp->function == dasd_3990_erp_compound_config)) {
+	} else if (sense &&
+		   ((erp->function == dasd_3990_erp_compound_retry) ||
+		    (erp->function == dasd_3990_erp_compound_path) ||
+		    (erp->function == dasd_3990_erp_compound_code) ||
+		    (erp->function == dasd_3990_erp_compound_config))) {
 
 		erp = dasd_3990_erp_compound(erp, sense);
 
 	} else {
-		/* No retry left and no additional special handling */
-		/*necessary */
-		DEV_MESSAGE(KERN_ERR, device,
-			    "no retries left for erp %p - "
-			    "set status to FAILED", erp);
+		/*
+		 * No retry left and no additional special handling
+		 * necessary
+		 */
+		dev_err(&device->cdev->dev,
+			"ERP %p has run out of retries and failed\n", erp);
 
 		erp->status = DASD_CQR_FAILED;
 	}
@@ -2548,24 +2594,25 @@ dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head,
 
 	if (erp->retries > 0) {
 
-		char *sense = erp->refers->irb.ecw;
+		char *sense = dasd_get_sense(&erp->refers->irb);
 
 		/* check for special retries */
-		if (erp->function == dasd_3990_erp_action_4) {
+		if (sense && erp->function == dasd_3990_erp_action_4) {
 
 			erp = dasd_3990_erp_action_4(erp, sense);
 
-		} else if (erp->function == dasd_3990_erp_action_1B_32) {
+		} else if (sense &&
+			   erp->function == dasd_3990_erp_action_1B_32) {
 
 			erp = dasd_3990_update_1B(erp, sense);
 
-		} else if (erp->function == dasd_3990_erp_int_req) {
+		} else if (sense && erp->function == dasd_3990_erp_int_req) {
 
 			erp = dasd_3990_erp_int_req(erp);
 
 		} else {
 			/* simple retry	  */
-			DEV_MESSAGE(KERN_DEBUG, device,
+			DBF_DEV_EVENT(DBF_DEBUG, device,
 				    "%i retries left for erp %p",
 				    erp->retries, erp);
 
@@ -2609,24 +2656,24 @@ dasd_3990_erp_action(struct dasd_ccw_req * cqr)
 
 	if (device->features & DASD_FEATURE_ERPLOG) {
 		/* print current erp_chain */
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "ERP chain at BEGINNING of ERP-ACTION");
+		dev_err(&device->cdev->dev,
+			    "ERP chain at BEGINNING of ERP-ACTION\n");
 		for (temp_erp = cqr;
 		     temp_erp != NULL; temp_erp = temp_erp->refers) {
 
-			DEV_MESSAGE(KERN_ERR, device,
-				    "   erp %p (%02x) refers to %p",
+			dev_err(&device->cdev->dev,
+				    "ERP %p (%02x) refers to %p\n",
 				    temp_erp, temp_erp->status,
 				    temp_erp->refers);
 		}
 	}
 
 	/* double-check if current erp/cqr was successful */
-	if ((cqr->irb.scsw.cmd.cstat == 0x00) &&
-	    (cqr->irb.scsw.cmd.dstat ==
+	if ((scsw_cstat(&cqr->irb.scsw) == 0x00) &&
+	    (scsw_dstat(&cqr->irb.scsw) ==
 	     (DEV_STAT_CHN_END | DEV_STAT_DEV_END))) {
 
-		DEV_MESSAGE(KERN_DEBUG, device,
+		DBF_DEV_EVENT(DBF_DEBUG, device,
 			    "ERP called for successful request %p"
 			    " - NO ERP necessary", cqr);
 
@@ -2648,13 +2695,13 @@ dasd_3990_erp_action(struct dasd_ccw_req * cqr)
 
 	if (device->features & DASD_FEATURE_ERPLOG) {
 		/* print current erp_chain */
-		DEV_MESSAGE(KERN_ERR, device, "%s",
-			    "ERP chain at END of ERP-ACTION");
+		dev_err(&device->cdev->dev,
+			    "ERP chain at END of ERP-ACTION\n");
 		for (temp_erp = erp;
 		     temp_erp != NULL; temp_erp = temp_erp->refers) {
 
-			DEV_MESSAGE(KERN_ERR, device,
-				    "   erp %p (%02x) refers to %p",
+			dev_err(&device->cdev->dev,
+				    "ERP %p (%02x) refers to %p\n",
 				    temp_erp, temp_erp->status,
 				    temp_erp->refers);
 		}
@@ -2667,6 +2714,8 @@ dasd_3990_erp_action(struct dasd_ccw_req * cqr)
 		list_add_tail(&erp->blocklist, &cqr->blocklist);
 	}
 
+
+
 	return erp;
 
 }				/* end dasd_3990_erp_action */