diff options
author | Arnd Bergmann <arnd@arndb.de> | 2013-02-19 20:54:15 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2013-02-19 20:54:25 +0100 |
commit | 6e7f7cfce26cabea2965a43b69b4a0c285a7e4c5 (patch) | |
tree | db7c3d908e8b308c7c559ed4bd561c7ff86da753 /drivers/rtc | |
parent | 001c5c4aaaffda840184700b8f488ced3c9dd0a1 (diff) | |
parent | 64ff1673332a1109780d731ca08dcd4f8ad33097 (diff) | |
download | linux-6e7f7cfce26cabea2965a43b69b4a0c285a7e4c5.tar.bz2 |
Merge tag 'omap-for-v3.9/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
These changes contain the OMAP USB related platform data changes
that were dropped from linux next because of the merge conflicts
as requested by me and Olof. The reason was that at this point
we really should be able to do the arch/arm related changes
separately from driver changes to avoid dependencies between
branches.
These patches were initially part of the USB related MFD patches.
Based on our comments, Roger Quadros quickly reworked these
patches into a shared branch between ARM SoC tree and the MFD
tree, then separate patches for the OMAP platform data and
MFD driver.
Note that this branch will conflict with c1d1cd597fc7
("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
for the merge resolution.
[arnd - resolved the merge conflict]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/rtc')
-rw-r--r-- | drivers/rtc/rtc-isl1208.c | 3 | ||||
-rw-r--r-- | drivers/rtc/rtc-pl031.c | 8 | ||||
-rw-r--r-- | drivers/rtc/rtc-vt8500.c | 2 |
3 files changed, 9 insertions, 4 deletions
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index afb7cfa85ccc..c016ad81767a 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -506,6 +506,7 @@ isl1208_rtc_interrupt(int irq, void *data) { unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct i2c_client *client = data; + struct rtc_device *rtc = i2c_get_clientdata(client); int handled = 0, sr, err; /* @@ -528,6 +529,8 @@ isl1208_rtc_interrupt(int irq, void *data) if (sr & ISL1208_REG_SR_ALM) { dev_dbg(&client->dev, "alarm!\n"); + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); + /* Clear the alarm */ sr &= ~ISL1208_REG_SR_ALM; sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr); diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 08378e3cc21c..10c1a3454e48 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -44,6 +44,7 @@ #define RTC_YMR 0x34 /* Year match register */ #define RTC_YLR 0x38 /* Year data load register */ +#define RTC_CR_EN (1 << 0) /* counter enable bit */ #define RTC_CR_CWEN (1 << 26) /* Clockwatch enable bit */ #define RTC_TCR_EN (1 << 1) /* Periodic timer enable bit */ @@ -320,7 +321,7 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) struct pl031_local *ldata; struct pl031_vendor_data *vendor = id->data; struct rtc_class_ops *ops = &vendor->ops; - unsigned long time; + unsigned long time, data; ret = amba_request_regions(adev, NULL); if (ret) @@ -345,10 +346,11 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) dev_dbg(&adev->dev, "designer ID = 0x%02x\n", amba_manf(adev)); dev_dbg(&adev->dev, "revision = 0x%01x\n", amba_rev(adev)); + data = readl(ldata->base + RTC_CR); /* Enable the clockwatch on ST Variants */ if (vendor->clockwatch) - writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN, - ldata->base + RTC_CR); + data |= RTC_CR_CWEN; + writel(data | RTC_CR_EN, ldata->base + RTC_CR); /* * On ST PL031 variants, the RTC reset value does not provide correct diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c index 00c930f4b6f3..2730533e2d2d 100644 --- a/drivers/rtc/rtc-vt8500.c +++ b/drivers/rtc/rtc-vt8500.c @@ -137,7 +137,7 @@ static int vt8500_rtc_set_time(struct device *dev, struct rtc_time *tm) return -EINVAL; } - writel((bin2bcd(tm->tm_year - 100) << DATE_YEAR_S) + writel((bin2bcd(tm->tm_year % 100) << DATE_YEAR_S) | (bin2bcd(tm->tm_mon + 1) << DATE_MONTH_S) | (bin2bcd(tm->tm_mday)) | ((tm->tm_year >= 200) << DATE_CENTURY_S), |