diff options
| author | Nicolas Ferre <nicolas.ferre@atmel.com> | 2014-12-04 14:59:24 +0100 |
|---|---|---|
| committer | Nicolas Ferre <nicolas.ferre@atmel.com> | 2015-01-15 15:24:02 +0100 |
| commit | 9cb0a36e0e894d7c6de9a21ed23256cf61a44878 (patch) | |
| tree | 96906b01aa5c1404d68d0af946aaff8e2f7e624d /drivers/rtc | |
| parent | a4d1ca3425df99918a6c8af45a660c62687e2ced (diff) | |
| download | linux-9cb0a36e0e894d7c6de9a21ed23256cf61a44878.tar.bz2 | |
rtc: at91/Kconfig: remove useless options
As we removed all the !DT boards during 3.19 cycle, we can now remove these
options.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Diffstat (limited to 'drivers/rtc')
| -rw-r--r-- | drivers/rtc/Kconfig | 28 |
1 files changed, 0 insertions, 28 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index f15cddfeb897..f211dfb7b913 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1141,34 +1141,6 @@ config RTC_DRV_AT91SAM9 probably want to use the real RTC block instead of the "RTT as an RTC" driver. -config RTC_DRV_AT91SAM9_RTT - int - range 0 1 - default 0 - depends on RTC_DRV_AT91SAM9 - help - This option is only relevant for legacy board support and - won't be used when booting a DT board. - - More than one RTT module is available. You can choose which - one will be used as an RTC. The default of zero is normally - OK to use, though some systems use that for non-RTC purposes. - -config RTC_DRV_AT91SAM9_GPBR - int - range 0 3 - default 0 - prompt "Backup Register Number" - depends on RTC_DRV_AT91SAM9 - help - This option is only relevant for legacy board support and - won't be used when booting a DT board. - - The RTC driver needs to use one of the General Purpose Backup - Registers (GPBRs) as well as the RTT. You can choose which one - will be used. The default of zero is normally OK to use, but - on some systems other software needs to use that register. - config RTC_DRV_AU1XXX tristate "Au1xxx Counter0 RTC support" depends on MIPS_ALCHEMY |