[PATCH] Add v3020 RTC support

This patch adds support for the v3020 RTC from EM Microelectronic.

The v3020 RTC is designed to be connected on a bus using only one data bit.
 Since any data bit may be used, it is necessary to specify this to the
driver by passing a struct v3020_platform_data pointer (see
include/linux/rtc-v3020.h) to the driver.

Part of the following code comes from the kernel patchs produced by
Compulab for their products.  The original file (available here:
http://raph.people.8d.com/misc/emv3020.c) was released under the terms of
the GPL license.

[akpm@osdl.org: cleanups]
Signed-off-by: Raphael Assenat <raph@raphnet.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 264 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c
new file mode 100644
index 000000000000..a40f400acff6
--- /dev/null
+++ b/drivers/rtc/rtc-v3020.c
@@ -0,0 +1,264 @@
+/* drivers/rtc/rtc-v3020.c
+ *
+ * Copyright (C) 2006 8D Technologies inc.
+ * Copyright (C) 2004 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the V3020 RTC
+ *
+ * Changelog:
+ *
+ *  10-May-2006: Raphael Assenat <raph@8d.com>
+ *				- Converted to platform driver
+ *				- Use the generic rtc class
+ *
+ *  ??-???-2004: Someone at Compulab
+ *  			- Initial driver creation.
+ *
+ */
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+#include <linux/bcd.h>
+#include <linux/rtc-v3020.h>
+
+#include <asm/io.h>
+
+#undef DEBUG
+
+struct v3020 {
+	void __iomem *ioaddress;
+	int leftshift;
+	struct rtc_device *rtc;
+};
+
+static void v3020_set_reg(struct v3020 *chip, unsigned char address,
+			unsigned char data)
+{
+	int i;
+	unsigned char tmp;
+
+	tmp = address;
+	for (i = 0; i < 4; i++) {
+		writel((tmp & 1) << chip->leftshift, chip->ioaddress);
+		tmp >>= 1;
+	}
+
+	/* Commands dont have data */
+	if (!V3020_IS_COMMAND(address)) {
+		for (i = 0; i < 8; i++) {
+			writel((data & 1) << chip->leftshift, chip->ioaddress);
+			data >>= 1;
+		}
+	}
+}
+
+static unsigned char v3020_get_reg(struct v3020 *chip, unsigned char address)
+{
+	unsigned int data=0;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		writel((address & 1) << chip->leftshift, chip->ioaddress);
+		address >>= 1;
+	}
+
+	for (i = 0; i < 8; i++) {
+		data >>= 1;
+		if (readl(chip->ioaddress) & (1 << chip->leftshift))
+			data |= 0x80;
+	}
+
+	return data;
+}
+
+static int v3020_read_time(struct device *dev, struct rtc_time *dt)
+{
+	struct v3020 *chip = dev_get_drvdata(dev);
+	int tmp;
+
+	/* Copy the current time to ram... */
+	v3020_set_reg(chip, V3020_CMD_CLOCK2RAM, 0);
+
+	/* ...and then read constant values. */
+	tmp = v3020_get_reg(chip, V3020_SECONDS);
+	dt->tm_sec	= BCD2BIN(tmp);
+	tmp = v3020_get_reg(chip, V3020_MINUTES);
+	dt->tm_min	= BCD2BIN(tmp);
+	tmp = v3020_get_reg(chip, V3020_HOURS);
+	dt->tm_hour	= BCD2BIN(tmp);
+	tmp = v3020_get_reg(chip, V3020_MONTH_DAY);
+	dt->tm_mday	= BCD2BIN(tmp);
+	tmp = v3020_get_reg(chip, V3020_MONTH);
+	dt->tm_mon	= BCD2BIN(tmp);
+	tmp = v3020_get_reg(chip, V3020_WEEK_DAY);
+	dt->tm_wday	= BCD2BIN(tmp);
+	tmp = v3020_get_reg(chip, V3020_YEAR);
+	dt->tm_year = BCD2BIN(tmp)+100;
+
+#ifdef DEBUG
+	printk("\n%s : Read RTC values\n",__FUNCTION__);
+	printk("tm_hour: %i\n",dt->tm_hour);
+	printk("tm_min : %i\n",dt->tm_min);
+	printk("tm_sec : %i\n",dt->tm_sec);
+	printk("tm_year: %i\n",dt->tm_year);
+	printk("tm_mon : %i\n",dt->tm_mon);
+	printk("tm_mday: %i\n",dt->tm_mday);
+	printk("tm_wday: %i\n",dt->tm_wday);
+#endif
+
+	return 0;
+}
+
+
+static int v3020_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct v3020 *chip = dev_get_drvdata(dev);
+
+#ifdef DEBUG
+	printk("\n%s : Setting RTC values\n",__FUNCTION__);
+	printk("tm_sec : %i\n",dt->tm_sec);
+	printk("tm_min : %i\n",dt->tm_min);
+	printk("tm_hour: %i\n",dt->tm_hour);
+	printk("tm_mday: %i\n",dt->tm_mday);
+	printk("tm_wday: %i\n",dt->tm_wday);
+	printk("tm_year: %i\n",dt->tm_year);
+#endif
+
+	/* Write all the values to ram... */
+	v3020_set_reg(chip, V3020_SECONDS, 	BIN2BCD(dt->tm_sec));
+	v3020_set_reg(chip, V3020_MINUTES, 	BIN2BCD(dt->tm_min));
+	v3020_set_reg(chip, V3020_HOURS, 	BIN2BCD(dt->tm_hour));
+	v3020_set_reg(chip, V3020_MONTH_DAY,	BIN2BCD(dt->tm_mday));
+	v3020_set_reg(chip, V3020_MONTH, 	BIN2BCD(dt->tm_mon));
+	v3020_set_reg(chip, V3020_WEEK_DAY, 	BIN2BCD(dt->tm_wday));
+	v3020_set_reg(chip, V3020_YEAR, 	BIN2BCD(dt->tm_year % 100));
+
+	/* ...and set the clock. */
+	v3020_set_reg(chip, V3020_CMD_RAM2CLOCK, 0);
+
+	/* Compulab used this delay here. I dont know why,
+	 * the datasheet does not specify a delay. */
+	/*mdelay(5);*/
+
+	return 0;
+}
+
+static struct rtc_class_ops v3020_rtc_ops = {
+	.read_time	= v3020_read_time,
+	.set_time	= v3020_set_time,
+};
+
+static int rtc_probe(struct platform_device *pdev)
+{
+	struct v3020_platform_data *pdata = pdev->dev.platform_data;
+	struct v3020 *chip;
+	struct rtc_device *rtc;
+	int retval = -EBUSY;
+	int i;
+	int temp;
+
+	if (pdev->num_resources != 1)
+		return -EBUSY;
+
+	if (pdev->resource[0].flags != IORESOURCE_MEM)
+		return -EBUSY;
+
+	if (pdev == NULL)
+		return -EBUSY;
+
+	chip = kzalloc(sizeof *chip, GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->leftshift = pdata->leftshift;
+	chip->ioaddress = ioremap(pdev->resource[0].start, 1);
+	if (chip->ioaddress == NULL)
+		goto err_chip;
+
+	/* Make sure the v3020 expects a communication cycle
+	 * by reading 8 times */
+	for (i = 0; i < 8; i++)
+		temp = readl(chip->ioaddress);
+
+	/* Test chip by doing a write/read sequence
+	 * to the chip ram */
+	v3020_set_reg(chip, V3020_SECONDS, 0x33);
+	if(v3020_get_reg(chip, V3020_SECONDS) != 0x33) {
+		retval = -ENODEV;
+		goto err_io;
+	}
+
+	/* Make sure frequency measurment mode, test modes, and lock
+	 * are all disabled */
+	v3020_set_reg(chip, V3020_STATUS_0, 0x0);
+
+	dev_info(&pdev->dev, "Chip available at physical address 0x%p,"
+		"data connected to D%d\n",
+		(void*)pdev->resource[0].start,
+		chip->leftshift);
+
+	platform_set_drvdata(pdev, chip);
+
+	rtc = rtc_device_register("v3020",
+				&pdev->dev, &v3020_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		retval = PTR_ERR(rtc);
+		goto err_io;
+	}
+	chip->rtc = rtc;
+
+	return 0;
+
+err_io:
+	iounmap(chip->ioaddress);
+err_chip:
+	kfree(chip);
+
+	return retval;
+}
+
+static int rtc_remove(struct platform_device *dev)
+{
+	struct v3020 *chip = platform_get_drvdata(dev);
+	struct rtc_device *rtc = chip->rtc;
+
+	if (rtc)
+		rtc_device_unregister(rtc);
+
+	iounmap(chip->ioaddress);
+	kfree(chip);
+
+	return 0;
+}
+
+static struct platform_driver rtc_device_driver = {
+	.probe	= rtc_probe,
+	.remove = rtc_remove,
+	.driver = {
+		.name	= "v3020",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static __init int v3020_init(void)
+{
+	return platform_driver_register(&rtc_device_driver);
+}
+
+static __exit void v3020_exit(void)
+{
+	platform_driver_unregister(&rtc_device_driver);
+}
+
+module_init(v3020_init);
+module_exit(v3020_exit);
+
+MODULE_DESCRIPTION("V3020 RTC");
+MODULE_AUTHOR("Raphael Assenat");
+MODULE_LICENSE("GPL");