summaryrefslogtreecommitdiffstats
path: root/drivers/remoteproc/wkup_m3_rproc.c
diff options
context:
space:
mode:
authorDave Gerlach <d-gerlach@ti.com>2015-05-22 15:45:30 -0500
committerOhad Ben-Cohen <ohad@wizery.com>2015-06-17 09:58:08 +0300
commita01bc0d5f557bd8becd0ba75d09c39192004697e (patch)
treea91c592b18f56241b568f3b83d9d247a3863bcc3 /drivers/remoteproc/wkup_m3_rproc.c
parentccbbb9faac946ce61c241ce9f08b3486fabf031d (diff)
downloadlinux-a01bc0d5f557bd8becd0ba75d09c39192004697e.tar.bz2
remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3
Add a remoteproc driver to load the firmware and boot a small Wakeup M3 processor present on TI AM33xx and AM43xx SoCs. This Wakeup M3 remote processor is an integrated Cortex M3 that allows the SoC to enter the lowest possible power state by taking control from the MPU after it has gone into its own low power state and shutting off any additional peripherals. The Wakeup M3 processor has two internal memory regions - 16 kB of unified instruction memory called UMEM used to store executable code, and 8 kB of data memory called DMEM used for all data sections. The Wakeup M3 processor executes its code entirely from within the UMEM and uses the DMEM for any data. It does not use any external memory or any other external resources. The device address view has the UMEM at address 0x0 and DMEM at address 0x80000, and these are computed automatically within the driver based on relative address calculation from the corresponding device tree IOMEM resources. These device addresses are used to aid the core remoteproc ELF loader code to properly translate and load the firmware segments through the .rproc_da_to_va ops. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Diffstat (limited to 'drivers/remoteproc/wkup_m3_rproc.c')
-rw-r--r--drivers/remoteproc/wkup_m3_rproc.c257
1 files changed, 257 insertions, 0 deletions
diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
new file mode 100644
index 000000000000..edf81819cce1
--- /dev/null
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -0,0 +1,257 @@
+/*
+ * TI AMx3 Wakeup M3 Remote Processor driver
+ *
+ * Copyright (C) 2014-2015 Texas Instruments, Inc.
+ *
+ * Dave Gerlach <d-gerlach@ti.com>
+ * Suman Anna <s-anna@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/remoteproc.h>
+
+#include <linux/platform_data/wkup_m3.h>
+
+#include "remoteproc_internal.h"
+
+#define WKUPM3_MEM_MAX 2
+
+/**
+ * struct wkup_m3_mem - WkupM3 internal memory structure
+ * @cpu_addr: MPU virtual address of the memory region
+ * @bus_addr: Bus address used to access the memory region
+ * @dev_addr: Device address from Wakeup M3 view
+ * @size: Size of the memory region
+ */
+struct wkup_m3_mem {
+ void __iomem *cpu_addr;
+ phys_addr_t bus_addr;
+ u32 dev_addr;
+ size_t size;
+};
+
+/**
+ * struct wkup_m3_rproc - WkupM3 remote processor state
+ * @rproc: rproc handle
+ * @pdev: pointer to platform device
+ * @mem: WkupM3 memory information
+ */
+struct wkup_m3_rproc {
+ struct rproc *rproc;
+ struct platform_device *pdev;
+ struct wkup_m3_mem mem[WKUPM3_MEM_MAX];
+};
+
+static int wkup_m3_rproc_start(struct rproc *rproc)
+{
+ struct wkup_m3_rproc *wkupm3 = rproc->priv;
+ struct platform_device *pdev = wkupm3->pdev;
+ struct device *dev = &pdev->dev;
+ struct wkup_m3_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata->deassert_reset(pdev, pdata->reset_name)) {
+ dev_err(dev, "Unable to reset wkup_m3!\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int wkup_m3_rproc_stop(struct rproc *rproc)
+{
+ struct wkup_m3_rproc *wkupm3 = rproc->priv;
+ struct platform_device *pdev = wkupm3->pdev;
+ struct device *dev = &pdev->dev;
+ struct wkup_m3_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata->assert_reset(pdev, pdata->reset_name)) {
+ dev_err(dev, "Unable to assert reset of wkup_m3!\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
+{
+ struct wkup_m3_rproc *wkupm3 = rproc->priv;
+ void *va = NULL;
+ int i;
+ u32 offset;
+
+ if (len <= 0)
+ return NULL;
+
+ for (i = 0; i < WKUPM3_MEM_MAX; i++) {
+ if (da >= wkupm3->mem[i].dev_addr && da + len <=
+ wkupm3->mem[i].dev_addr + wkupm3->mem[i].size) {
+ offset = da - wkupm3->mem[i].dev_addr;
+ /* __force to make sparse happy with type conversion */
+ va = (__force void *)(wkupm3->mem[i].cpu_addr + offset);
+ break;
+ }
+ }
+
+ return va;
+}
+
+static struct rproc_ops wkup_m3_rproc_ops = {
+ .start = wkup_m3_rproc_start,
+ .stop = wkup_m3_rproc_stop,
+ .da_to_va = wkup_m3_rproc_da_to_va,
+};
+
+static const struct of_device_id wkup_m3_rproc_of_match[] = {
+ { .compatible = "ti,am3352-wkup-m3", },
+ { .compatible = "ti,am4372-wkup-m3", },
+ {},
+};
+
+static int wkup_m3_rproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct wkup_m3_platform_data *pdata = dev->platform_data;
+ /* umem always needs to be processed first */
+ const char *mem_names[WKUPM3_MEM_MAX] = { "umem", "dmem" };
+ struct wkup_m3_rproc *wkupm3;
+ const char *fw_name;
+ struct rproc *rproc;
+ struct resource *res;
+ const __be32 *addrp;
+ u32 l4_offset = 0;
+ u64 size;
+ int ret;
+ int i;
+
+ if (!(pdata && pdata->deassert_reset && pdata->assert_reset &&
+ pdata->reset_name)) {
+ dev_err(dev, "Platform data missing!\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_string(dev->of_node, "ti,pm-firmware",
+ &fw_name);
+ if (ret) {
+ dev_err(dev, "No firmware filename given\n");
+ return -ENODEV;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
+ goto err;
+ }
+
+ rproc = rproc_alloc(dev, "wkup_m3", &wkup_m3_rproc_ops,
+ fw_name, sizeof(*wkupm3));
+ if (!rproc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ wkupm3 = rproc->priv;
+ wkupm3->rproc = rproc;
+ wkupm3->pdev = pdev;
+
+ for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ mem_names[i]);
+ wkupm3->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(wkupm3->mem[i].cpu_addr)) {
+ dev_err(&pdev->dev, "devm_ioremap_resource failed for resource %d\n",
+ i);
+ ret = PTR_ERR(wkupm3->mem[i].cpu_addr);
+ goto err;
+ }
+ wkupm3->mem[i].bus_addr = res->start;
+ wkupm3->mem[i].size = resource_size(res);
+ addrp = of_get_address(dev->of_node, i, &size, NULL);
+ /*
+ * The wkupm3 has umem at address 0 in its view, so the device
+ * addresses for each memory region is computed as a relative
+ * offset of the bus address for umem, and therefore needs to be
+ * processed first.
+ */
+ if (!strcmp(mem_names[i], "umem"))
+ l4_offset = be32_to_cpu(*addrp);
+ wkupm3->mem[i].dev_addr = be32_to_cpu(*addrp) - l4_offset;
+ }
+
+ dev_set_drvdata(dev, rproc);
+
+ ret = rproc_add(rproc);
+ if (ret) {
+ dev_err(dev, "rproc_add failed\n");
+ goto err_put_rproc;
+ }
+
+ return 0;
+
+err_put_rproc:
+ rproc_put(rproc);
+err:
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static int wkup_m3_rproc_remove(struct platform_device *pdev)
+{
+ struct rproc *rproc = platform_get_drvdata(pdev);
+
+ rproc_del(rproc);
+ rproc_put(rproc);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wkup_m3_rpm_suspend(struct device *dev)
+{
+ return -EBUSY;
+}
+
+static int wkup_m3_rpm_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops wkup_m3_rproc_pm_ops = {
+ SET_RUNTIME_PM_OPS(wkup_m3_rpm_suspend, wkup_m3_rpm_resume, NULL)
+};
+
+static struct platform_driver wkup_m3_rproc_driver = {
+ .probe = wkup_m3_rproc_probe,
+ .remove = wkup_m3_rproc_remove,
+ .driver = {
+ .name = "wkup_m3_rproc",
+ .of_match_table = wkup_m3_rproc_of_match,
+ .pm = &wkup_m3_rproc_pm_ops,
+ },
+};
+
+module_platform_driver(wkup_m3_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI Wakeup M3 remote processor control driver");
+MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");