diff options
author | Suman Anna <s-anna@ti.com> | 2022-02-13 14:12:46 -0600 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-03-11 14:31:56 -0600 |
commit | b8431920391d36c273f63a29eab0dfc7e884dd17 (patch) | |
tree | 4d1133f4d77d50851c1519b17e681c00f4ffbb1a /drivers/remoteproc/ti_k3_dsp_remoteproc.c | |
parent | 2eab5efeb4d644d9c94e29c3cbb35a47f715bffd (diff) | |
download | linux-b8431920391d36c273f63a29eab0dfc7e884dd17.tar.bz2 |
remoteproc: k3-dsp: Add support for IPC-only mode for all K3 DSPs
Add support to the K3 DSP remoteproc driver to configure all the C66x
and C71x cores on J721E SoCs to be either in IPC-only mode or the
traditional remoteproc mode. The IPC-only mode expects that the remote
processors are already booted by the bootloader, and only perform the
minimum steps required to initialize and deinitialize the virtio IPC
transports. The remoteproc mode allows the kernel remoteproc driver to
do the regular load and boot and other device management operations for
a DSP.
The IPC-only mode for a DSP is detected and configured at driver probe
time by querying the System Firmware for the DSP power and reset state
and/or status and making sure that the DSP is indeed started by the
bootloaders, otherwise the device is configured for remoteproc mode.
Support for IPC-only mode is achieved through .attach(), .detach() and
.get_loaded_rsc_table() callback ops and zeroing out the regular rproc
ops .prepare(), .unprepare(), .start() and .stop(). The resource table
follows a design-by-contract approach and is expected to be at the base
of the DDR firmware region reserved for each remoteproc, it is mostly
expected to contain only the virtio device and trace resource entries.
NOTE:
The driver cannot configure a DSP core for remoteproc mode by any
means without rebooting the kernel if that DSP core has been started
by a bootloader. This is the current desired behavior and can be
enhanced in the future if the feature is needed.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-6-s-anna@ti.com
Diffstat (limited to 'drivers/remoteproc/ti_k3_dsp_remoteproc.c')
-rw-r--r-- | drivers/remoteproc/ti_k3_dsp_remoteproc.c | 141 |
1 files changed, 124 insertions, 17 deletions
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c index b3ee03da5569..eb9c64f7b9b4 100644 --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c @@ -260,7 +260,8 @@ static int k3_dsp_rproc_request_mbox(struct rproc *rproc) * used to release the global reset on C66x DSPs to allow loading into the DSP * internal RAMs. The .prepare() ops is invoked by remoteproc core before any * firmware loading, and is followed by the .start() ops after loading to - * actually let the C66x DSP cores run. + * actually let the C66x DSP cores run. This callback is invoked only in + * remoteproc mode. */ static int k3_dsp_rproc_prepare(struct rproc *rproc) { @@ -284,7 +285,7 @@ static int k3_dsp_rproc_prepare(struct rproc *rproc) * powering down the C66x DSP cores. The cores themselves are only halted in the * .stop() callback through the local reset, and the .unprepare() ops is invoked * by the remoteproc core after the remoteproc is stopped to balance the global - * reset. + * reset. This callback is invoked only in remoteproc mode. */ static int k3_dsp_rproc_unprepare(struct rproc *rproc) { @@ -305,7 +306,7 @@ static int k3_dsp_rproc_unprepare(struct rproc *rproc) * * This function will be invoked only after the firmware for this rproc * was loaded, parsed successfully, and all of its resource requirements - * were met. + * were met. This callback is invoked only in remoteproc mode. */ static int k3_dsp_rproc_start(struct rproc *rproc) { @@ -346,7 +347,7 @@ put_mbox: * Stop the DSP remote processor. * * This function puts the DSP processor into reset, and finishes processing - * of any pending messages. + * of any pending messages. This callback is invoked only in remoteproc mode. */ static int k3_dsp_rproc_stop(struct rproc *rproc) { @@ -360,6 +361,78 @@ static int k3_dsp_rproc_stop(struct rproc *rproc) } /* + * Attach to a running DSP remote processor (IPC-only mode) + * + * This rproc attach callback only needs to request the mailbox, the remote + * processor is already booted, so there is no need to issue any TI-SCI + * commands to boot the DSP core. This callback is invoked only in IPC-only + * mode. + */ +static int k3_dsp_rproc_attach(struct rproc *rproc) +{ + struct k3_dsp_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + int ret; + + ret = k3_dsp_rproc_request_mbox(rproc); + if (ret) + return ret; + + dev_info(dev, "DSP initialized in IPC-only mode\n"); + return 0; +} + +/* + * Detach from a running DSP remote processor (IPC-only mode) + * + * This rproc detach callback performs the opposite operation to attach callback + * and only needs to release the mailbox, the DSP core is not stopped and will + * be left to continue to run its booted firmware. This callback is invoked only + * in IPC-only mode. + */ +static int k3_dsp_rproc_detach(struct rproc *rproc) +{ + struct k3_dsp_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + + mbox_free_channel(kproc->mbox); + dev_info(dev, "DSP deinitialized in IPC-only mode\n"); + return 0; +} + +/* + * This function implements the .get_loaded_rsc_table() callback and is used + * to provide the resource table for a booted DSP in IPC-only mode. The K3 DSP + * firmwares follow a design-by-contract approach and are expected to have the + * resource table at the base of the DDR region reserved for firmware usage. + * This provides flexibility for the remote processor to be booted by different + * bootloaders that may or may not have the ability to publish the resource table + * address and size through a DT property. This callback is invoked only in + * IPC-only mode. + */ +static struct resource_table *k3_dsp_get_loaded_rsc_table(struct rproc *rproc, + size_t *rsc_table_sz) +{ + struct k3_dsp_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + + if (!kproc->rmem[0].cpu_addr) { + dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found"); + return ERR_PTR(-ENOMEM); + } + + /* + * NOTE: The resource table size is currently hard-coded to a maximum + * of 256 bytes. The most common resource table usage for K3 firmwares + * is to only have the vdev resource entry and an optional trace entry. + * The exact size could be computed based on resource table address, but + * the hard-coded value suffices to support the IPC-only mode. + */ + *rsc_table_sz = 256; + return (struct resource_table *)kproc->rmem[0].cpu_addr; +} + +/* * Custom function to translate a DSP device address (internal RAMs only) to a * kernel virtual address. The DSPs can access their RAMs at either an internal * address visible only from a DSP, or at the SoC-level bus address. Both these @@ -605,6 +678,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) struct k3_dsp_rproc *kproc; struct rproc *rproc; const char *fw_name; + bool p_state = false; int ret = 0; int ret1; @@ -683,19 +757,43 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev) goto release_tsp; } - /* - * ensure the DSP local reset is asserted to ensure the DSP doesn't - * execute bogus code in .prepare() when the module reset is released. - */ - if (data->uses_lreset) { - ret = reset_control_status(kproc->reset); - if (ret < 0) { - dev_err(dev, "failed to get reset status, status = %d\n", - ret); - goto release_mem; - } else if (ret == 0) { - dev_warn(dev, "local reset is deasserted for device\n"); - k3_dsp_rproc_reset(kproc); + ret = kproc->ti_sci->ops.dev_ops.is_on(kproc->ti_sci, kproc->ti_sci_id, + NULL, &p_state); + if (ret) { + dev_err(dev, "failed to get initial state, mode cannot be determined, ret = %d\n", + ret); + goto release_mem; + } + + /* configure J721E devices for either remoteproc or IPC-only mode */ + if (p_state) { + dev_info(dev, "configured DSP for IPC-only mode\n"); + rproc->state = RPROC_DETACHED; + /* override rproc ops with only required IPC-only mode ops */ + rproc->ops->prepare = NULL; + rproc->ops->unprepare = NULL; + rproc->ops->start = NULL; + rproc->ops->stop = NULL; + rproc->ops->attach = k3_dsp_rproc_attach; + rproc->ops->detach = k3_dsp_rproc_detach; + rproc->ops->get_loaded_rsc_table = k3_dsp_get_loaded_rsc_table; + } else { + dev_info(dev, "configured DSP for remoteproc mode\n"); + /* + * ensure the DSP local reset is asserted to ensure the DSP + * doesn't execute bogus code in .prepare() when the module + * reset is released. + */ + if (data->uses_lreset) { + ret = reset_control_status(kproc->reset); + if (ret < 0) { + dev_err(dev, "failed to get reset status, status = %d\n", + ret); + goto release_mem; + } else if (ret == 0) { + dev_warn(dev, "local reset is deasserted for device\n"); + k3_dsp_rproc_reset(kproc); + } } } @@ -730,9 +828,18 @@ free_rproc: static int k3_dsp_rproc_remove(struct platform_device *pdev) { struct k3_dsp_rproc *kproc = platform_get_drvdata(pdev); + struct rproc *rproc = kproc->rproc; struct device *dev = &pdev->dev; int ret; + if (rproc->state == RPROC_ATTACHED) { + ret = rproc_detach(rproc); + if (ret) { + dev_err(dev, "failed to detach proc, ret = %d\n", ret); + return ret; + } + } + rproc_del(kproc->rproc); ret = ti_sci_proc_release(kproc->tsp); |