diff options
| author | Krzysztof Kozlowski <krzk@kernel.org> | 2019-06-29 13:44:46 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2019-07-02 12:43:25 +0100 |
| commit | 9d83dcb3e4553f34ee1c4f09d65173159f9eb7a7 (patch) | |
| tree | 0f01396f3599aeed3c2b304637d09bcb298c6dcc /drivers/regulator | |
| parent | 16da0eb5ab6ef2dd1d33431199126e63db9997cc (diff) | |
| download | linux-9d83dcb3e4553f34ee1c4f09d65173159f9eb7a7.tar.bz2 | |
regulator: s2mps11: Adjust supported buck voltages to real values
The driver was registering buck regulators with unsupported range of
voltages for S2MPS11 devices. Basically it assumed that all 256 values
are possible for a single 8-bit I2C register controlling buck's voltage.
This is not true, as datasheet describes subset of these which can be
used.
For example for buck[12346] the minimum voltage is 650 mV which
corresponds to register value of 0x8. The driver was however
registering regulator starting at 600 mV, so for a step of 6.25 mV this
gave the same result. However this allowed to try to configure
regulators to unsupported values.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/s2mps11.c | 27 |
1 files changed, 17 insertions, 10 deletions
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 7a89030187a4..5b7ba7c6c4f6 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -269,9 +269,10 @@ static const struct regulator_ops s2mps11_buck_ops = { .ops = &s2mps11_buck_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ - .min_uV = MIN_600_MV, \ + .min_uV = MIN_650_MV, \ .uV_step = STEP_6_25_MV, \ - .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .linear_min_sel = 8, \ + .n_voltages = S2MPS11_BUCK12346_N_VOLTAGES, \ .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ @@ -285,9 +286,10 @@ static const struct regulator_ops s2mps11_buck_ops = { .ops = &s2mps11_buck_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ - .min_uV = MIN_600_MV, \ + .min_uV = MIN_650_MV, \ .uV_step = STEP_6_25_MV, \ - .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .linear_min_sel = 8, \ + .n_voltages = S2MPS11_BUCK5_N_VOLTAGES, \ .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B5CTRL2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ @@ -295,7 +297,7 @@ static const struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_s2mps11_buck67810(num, min, step) { \ +#define regulator_desc_s2mps11_buck67810(num, min, step, min_sel, voltages) { \ .name = "BUCK"#num, \ .id = S2MPS11_BUCK##num, \ .ops = &s2mps11_buck_ops, \ @@ -303,7 +305,8 @@ static const struct regulator_ops s2mps11_buck_ops = { .owner = THIS_MODULE, \ .min_uV = min, \ .uV_step = step, \ - .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .linear_min_sel = min_sel, \ + .n_voltages = voltages, \ .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ @@ -371,11 +374,15 @@ static const struct regulator_desc s2mps11_regulators[] = { regulator_desc_s2mps11_buck1_4(3), regulator_desc_s2mps11_buck1_4(4), regulator_desc_s2mps11_buck5, - regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV), - regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV), - regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV), + regulator_desc_s2mps11_buck67810(6, MIN_650_MV, STEP_6_25_MV, 8, + S2MPS11_BUCK12346_N_VOLTAGES), + regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV, 0, + S2MPS11_BUCK7810_N_VOLTAGES), + regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV, 0, + S2MPS11_BUCK7810_N_VOLTAGES), regulator_desc_s2mps11_buck9, - regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV), + regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV, 0, + S2MPS11_BUCK7810_N_VOLTAGES), }; static const struct regulator_ops s2mps14_reg_ops; |