summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
authorJoonwoo Park <joonwoop@codeaurora.org>2016-09-19 14:46:54 -0700
committerMark Brown <broonie@kernel.org>2016-09-24 19:36:41 +0100
commit577766175c40d4f425be47b9e70d80238e53f996 (patch)
tree27085b73567bfb76e2e2ff56299b6ba44766a2ae /drivers/regulator
parent29b4817d4018df78086157ea3a55c1d9424a7cfc (diff)
downloadlinux-577766175c40d4f425be47b9e70d80238e53f996.tar.bz2
regulator: core: don't return error with inadequate reason
drms_uA_update() always returns failure when it cannot find regulator's input voltage. But if hardware supports load configuration with ops->set_load() and the input regulator isn't specified with valid reason such as the input regulator is battery, not finding input voltage is normal so such case should not return with an error. Avoid such inadequate error return by checking input/output voltages only when drms_uA_update() is about to configure load with enum based ops->set_mode(). Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/core.c36
1 files changed, 18 insertions, 18 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index db320e8fa865..bafcdff42872 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -679,24 +679,6 @@ static int drms_uA_update(struct regulator_dev *rdev)
!rdev->desc->ops->set_load)
return -EINVAL;
- /* get output voltage */
- output_uV = _regulator_get_voltage(rdev);
- if (output_uV <= 0) {
- rdev_err(rdev, "invalid output voltage found\n");
- return -EINVAL;
- }
-
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
- if (input_uV <= 0)
- input_uV = rdev->constraints->input_uV;
- if (input_uV <= 0) {
- rdev_err(rdev, "invalid input voltage found\n");
- return -EINVAL;
- }
-
/* calc total requested load */
list_for_each_entry(sibling, &rdev->consumer_list, list)
current_uA += sibling->uA_load;
@@ -709,6 +691,24 @@ static int drms_uA_update(struct regulator_dev *rdev)
if (err < 0)
rdev_err(rdev, "failed to set load %d\n", current_uA);
} else {
+ /* get output voltage */
+ output_uV = _regulator_get_voltage(rdev);
+ if (output_uV <= 0) {
+ rdev_err(rdev, "invalid output voltage found\n");
+ return -EINVAL;
+ }
+
+ /* get input voltage */
+ input_uV = 0;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+ if (input_uV <= 0)
+ input_uV = rdev->constraints->input_uV;
+ if (input_uV <= 0) {
+ rdev_err(rdev, "invalid input voltage found\n");
+ return -EINVAL;
+ }
+
/* now get the optimum mode for our new total regulator load */
mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
output_uV, current_uA);