summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2015-10-20 14:37:28 +0200
committerMark Brown <broonie@kernel.org>2015-10-22 13:34:11 +0100
commitfc42112c0eaa6fc7c7fe61f8c6fb91b204b4d31d (patch)
tree17690576a12144fbaa47315e72c4c0c6175efd68 /drivers/regulator
parent2098bf215f85fd92175bd9f851cfdc5df5b736e4 (diff)
downloadlinux-fc42112c0eaa6fc7c7fe61f8c6fb91b204b4d31d.tar.bz2
regulator: core: Propagate voltage changes to supply regulators
Until now changing the voltage of a regulator only ever effected the regulator itself, but never its supplies. It's a common pattern though to put LDO regulators behind switching regulators. The switching regulators efficiently drop the input voltage but have a high ripple on their output. The output is then cleaned up by the LDOs. For higher energy efficiency the voltage drop at the LDOs should be minimized. For this scenario we need to propagate the voltage change to the supply regulators. Another scenario where voltage propagation is desired is a regulator which only consists of a switch and thus cannot regulate voltages itself. In this case we can pass setting voltages to the supply. This patch adds support for voltage propagation. We do voltage propagation when the current regulator has a minimum dropout voltage specified or if the current regulator lacks a get_voltage operation (indicating it's a switch and not a regulator). Changing the supply voltage must be done carefully. When we are increasing the current regulators output we must first increase the supply voltage and then the regulator itself. When we are decreasing the current regulators voltage we must decrease the supply voltage after changing the current regulators voltage. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/core.c54
1 files changed, 52 insertions, 2 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f15b04548715..771c6235cced 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2769,6 +2769,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
int ret = 0;
int old_min_uV, old_max_uV;
int current_uV;
+ int best_supply_uV = 0;
+ int supply_change_uV = 0;
/* If we're setting the same range as last time the change
* should be a noop (some cpufreq implementations use the same
@@ -2812,10 +2814,58 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
if (ret < 0)
goto out2;
+ if (rdev->supply && (rdev->desc->min_dropout_uV ||
+ !rdev->desc->ops->get_voltage)) {
+ int current_supply_uV;
+ int selector;
+
+ selector = regulator_map_voltage(rdev, min_uV, max_uV);
+ if (selector < 0) {
+ ret = selector;
+ goto out2;
+ }
+
+ best_supply_uV = _regulator_list_voltage(regulator, selector, 0);
+ if (best_supply_uV < 0) {
+ ret = best_supply_uV;
+ goto out2;
+ }
+
+ best_supply_uV += rdev->desc->min_dropout_uV;
+
+ current_supply_uV = _regulator_get_voltage(rdev->supply->rdev);
+ if (current_supply_uV < 0) {
+ ret = current_supply_uV;
+ goto out2;
+ }
+
+ supply_change_uV = best_supply_uV - current_supply_uV;
+ }
+
+ if (supply_change_uV > 0) {
+ ret = regulator_set_voltage_unlocked(rdev->supply,
+ best_supply_uV, INT_MAX);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n",
+ ret);
+ goto out2;
+ }
+ }
+
ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
if (ret < 0)
goto out2;
+ if (supply_change_uV < 0) {
+ ret = regulator_set_voltage_unlocked(rdev->supply,
+ best_supply_uV, INT_MAX);
+ if (ret)
+ dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n",
+ ret);
+ /* No need to fail here */
+ ret = 0;
+ }
+
out:
return ret;
out2:
@@ -2847,11 +2897,11 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
{
int ret = 0;
- mutex_lock(&regulator->rdev->mutex);
+ regulator_lock_supply(regulator->rdev);
ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV);
- mutex_unlock(&regulator->rdev->mutex);
+ regulator_unlock_supply(regulator->rdev);
return ret;
}