diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2018-05-14 10:06:28 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2018-05-24 16:50:31 +0100 |
| commit | 2468f0d51548b23507ceb3bba5f4e3acaea117ba (patch) | |
| tree | 08f177171e5c7ecbaab1bd816fa28acb6d4161a8 /drivers/regulator | |
| parent | b2d751b7f69b352de0280d2279765a9506ed54f0 (diff) | |
| download | linux-2468f0d51548b23507ceb3bba5f4e3acaea117ba.tar.bz2 | |
regulator: lp8788-ldo: Pass descriptor instead of GPIO number
Instead of passing a global GPIO number, pass a descriptor looked
up with the standard devm_gpiod_get_index_optional() call.
This driver has supported passing a LDO enable GPIO for years,
yet this facility has never been put to use in the upstream kernel.
If someone desires to put in place GPIO control for the LDOs,
this can be done by adding a GPIO descriptor table in the MFD
nexus in drivers/mfd/lp8788.c for the LDO device when spawning the
MFD children, or using a board file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/lp8788-ldo.c | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c index cbfd35873575..f2347474a106 100644 --- a/drivers/regulator/lp8788-ldo.c +++ b/drivers/regulator/lp8788-ldo.c @@ -16,7 +16,7 @@ #include <linux/err.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/mfd/lp8788.h> /* register address */ @@ -85,8 +85,6 @@ #define LP8788_STARTUP_TIME_S 3 #define ENABLE_TIME_USEC 32 -#define ENABLE GPIOF_OUT_INIT_HIGH -#define DISABLE GPIOF_OUT_INIT_LOW enum lp8788_ldo_id { DLDO1, @@ -117,7 +115,7 @@ struct lp8788_ldo { struct lp8788 *lp; struct regulator_desc *desc; struct regulator_dev *regulator; - struct lp8788_ldo_enable_pin *en_pin; + struct gpio_desc *ena_gpiod; }; /* DLDO 1, 2, 3, 9 voltage table */ @@ -469,7 +467,6 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev, enum lp8788_ldo_id id) { struct lp8788 *lp = ldo->lp; - struct lp8788_platform_data *pdata = lp->pdata; enum lp8788_ext_ldo_en_id enable_id; u8 en_mask[] = { [EN_ALDO1] = LP8788_EN_SEL_ALDO1_M, @@ -504,11 +501,18 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev, return 0; } - /* if no platform data for ldo pin, then set default enable mode */ - if (!pdata || !pdata->ldo_pin || !pdata->ldo_pin[enable_id]) + /* FIXME: check default mode for GPIO here: high or low? */ + ldo->ena_gpiod = devm_gpiod_get_index_optional(&pdev->dev, + "enable", + enable_id, + GPIOD_OUT_HIGH); + if (IS_ERR(ldo->ena_gpiod)) + return PTR_ERR(ldo->ena_gpiod); + + /* if no GPIO for ldo pin, then set default enable mode */ + if (!ldo->ena_gpiod) goto set_default_ldo_enable_mode; - ldo->en_pin = pdata->ldo_pin[enable_id]; return 0; set_default_ldo_enable_mode: @@ -533,10 +537,8 @@ static int lp8788_dldo_probe(struct platform_device *pdev) if (ret) return ret; - if (ldo->en_pin) { - cfg.ena_gpio = ldo->en_pin->gpio; - cfg.ena_gpio_flags = ldo->en_pin->init_state; - } + if (ldo->ena_gpiod) + cfg.ena_gpiod = ldo->ena_gpiod; cfg.dev = pdev->dev.parent; cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL; @@ -582,10 +584,8 @@ static int lp8788_aldo_probe(struct platform_device *pdev) if (ret) return ret; - if (ldo->en_pin) { - cfg.ena_gpio = ldo->en_pin->gpio; - cfg.ena_gpio_flags = ldo->en_pin->init_state; - } + if (ldo->ena_gpiod) + cfg.ena_gpiod = ldo->ena_gpiod; cfg.dev = pdev->dev.parent; cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL; |