regulator: act8945a: add regulator driver for ACT8945A

This patch adds new regulator driver to support ACT8945A MFD
chip's regulators.

The ACT8945A has three step-down DC/DC converters and four
low-dropout regulators.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

3 files changed, 175 insertions, 0 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8155e80dd3f8..74a6354eaefa 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -78,6 +78,15 @@ config REGULATOR_ACT8865
 	  This driver controls a active-semi act8865 voltage output
 	  regulator via I2C bus.
 
+config REGULATOR_ACT8945A
+	tristate "Active-semi ACT8945A voltage regulator"
+	depends on MFD_ACT8945A
+	help
+	  This driver controls a active-semi ACT8945A voltage regulator
+	  via I2C bus. The ACT8945A features three step-down DC/DC converters
+	  and four low-dropout linear regulators, along with a ActivePath
+	  battery charger.
+
 config REGULATOR_AD5398
 	tristate "Analog Devices AD5398/AD5821 regulators"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 980b1943fa81..348cfd727350 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500-ext.o ab8500.o
 obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
+obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
new file mode 100644
index 000000000000..441864b9fece
--- /dev/null
+++ b/drivers/regulator/act8945a-regulator.c
@@ -0,0 +1,165 @@
+/*
+ * Voltage regulation driver for active-semi ACT8945A PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/**
+ * ACT8945A Global Register Map.
+ */
+#define ACT8945A_SYS_MODE	0x00
+#define ACT8945A_SYS_CTRL	0x01
+#define ACT8945A_DCDC1_VSET1	0x20
+#define ACT8945A_DCDC1_VSET2	0x21
+#define ACT8945A_DCDC1_CTRL	0x22
+#define ACT8945A_DCDC2_VSET1	0x30
+#define ACT8945A_DCDC2_VSET2	0x31
+#define ACT8945A_DCDC2_CTRL	0x32
+#define ACT8945A_DCDC3_VSET1	0x40
+#define ACT8945A_DCDC3_VSET2	0x41
+#define ACT8945A_DCDC3_CTRL	0x42
+#define ACT8945A_LDO1_VSET	0x50
+#define ACT8945A_LDO1_CTRL	0x51
+#define ACT8945A_LDO2_VSET	0x54
+#define ACT8945A_LDO2_CTRL	0x55
+#define ACT8945A_LDO3_VSET	0x60
+#define ACT8945A_LDO3_CTRL	0x61
+#define ACT8945A_LDO4_VSET	0x64
+#define ACT8945A_LDO4_CTRL	0x65
+
+/**
+ * Field Definitions.
+ */
+#define ACT8945A_ENA		0x80	/* ON - [7] */
+#define ACT8945A_VSEL_MASK	0x3F	/* VSET - [5:0] */
+
+/**
+ * ACT8945A Voltage Number
+ */
+#define ACT8945A_VOLTAGE_NUM	64
+
+enum {
+	ACT8945A_ID_DCDC1,
+	ACT8945A_ID_DCDC2,
+	ACT8945A_ID_DCDC3,
+	ACT8945A_ID_LDO1,
+	ACT8945A_ID_LDO2,
+	ACT8945A_ID_LDO3,
+	ACT8945A_ID_LDO4,
+	ACT8945A_REG_NUM,
+};
+
+static const struct regulator_linear_range act8945a_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
+	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
+	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
+};
+
+static struct regulator_ops act8945a_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply)		\
+	[_family##_ID_##_id] = {					\
+		.name			= _name,			\
+		.supply_name		= _supply,			\
+		.of_match		= of_match_ptr("REG_"#_id),	\
+		.regulators_node	= of_match_ptr("regulators"),	\
+		.id			= _family##_ID_##_id,		\
+		.type			= REGULATOR_VOLTAGE,		\
+		.ops			= &act8945a_ops,		\
+		.n_voltages		= ACT8945A_VOLTAGE_NUM,		\
+		.linear_ranges		= act8945a_voltage_ranges,	\
+		.n_linear_ranges	= ARRAY_SIZE(act8945a_voltage_ranges), \
+		.vsel_reg		= _family##_##_id##_##_vsel_reg, \
+		.vsel_mask		= ACT8945A_VSEL_MASK,		\
+		.enable_reg		= _family##_##_id##_CTRL,	\
+		.enable_mask		= ACT8945A_ENA,			\
+		.owner			= THIS_MODULE,			\
+	}
+
+static const struct regulator_desc act8945a_regulators[] = {
+	ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"),
+	ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"),
+	ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"),
+	ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
+	ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
+	ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
+	ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
+};
+
+static const struct regulator_desc act8945a_alt_regulators[] = {
+	ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"),
+	ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"),
+	ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"),
+	ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
+	ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
+	ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
+	ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
+};
+
+static int act8945a_pmic_probe(struct platform_device *pdev)
+{
+	struct regulator_config config = { };
+	const struct regulator_desc *regulators;
+	struct regulator_dev *rdev;
+	int i, num_regulators;
+	bool voltage_select;
+
+	voltage_select = of_property_read_bool(pdev->dev.parent->of_node,
+					       "active-semi,vsel-high");
+
+	if (voltage_select) {
+		regulators = act8945a_alt_regulators;
+		num_regulators = ARRAY_SIZE(act8945a_alt_regulators);
+	} else {
+		regulators = act8945a_regulators;
+		num_regulators = ARRAY_SIZE(act8945a_regulators);
+	}
+
+	config.dev = &pdev->dev;
+	config.dev->of_node = pdev->dev.parent->of_node;
+	for (i = 0; i < num_regulators; i++) {
+		rdev = devm_regulator_register(&pdev->dev, &regulators[i], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev,
+				"failed to register %s regulator\n",
+				regulators[i].name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver act8945a_pmic_driver = {
+	.driver = {
+		.name = "act8945a-regulator",
+	},
+	.probe = act8945a_pmic_probe,
+};
+module_platform_driver(act8945a_pmic_driver);
+
+MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");