Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

The UDP reuseport conflict was a little bit tricky.

The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.

At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.

This requires moving the reuseport_has_conns() logic into the callers.

While we are here, get rid of inline directives as they do not belong
in foo.c files.

The other changes were cases of more straightforward overlapping
modifications.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 494 insertions, 0 deletions

diff --git a/drivers/regulator/da903x-regulator.c b/drivers/regulator/da903x-regulator.c
new file mode 100644
index 000000000000..770e694824ac
--- /dev/null
+++ b/drivers/regulator/da903x-regulator.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulators driver for Dialog Semiconductor DA903x
+//
+// Copyright (C) 2006-2008 Marvell International Ltd.
+// Copyright (C) 2008 Compulab Ltd.
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/da903x.h>
+
+/* DA9030 Registers */
+#define DA9030_INVAL		(-1)
+#define DA9030_LDO1011		(0x10)
+#define DA9030_LDO15		(0x11)
+#define DA9030_LDO1416		(0x12)
+#define DA9030_LDO1819		(0x13)
+#define DA9030_LDO17		(0x14)
+#define DA9030_BUCK2DVM1	(0x15)
+#define DA9030_BUCK2DVM2	(0x16)
+#define DA9030_RCTL11		(0x17)
+#define DA9030_RCTL21		(0x18)
+#define DA9030_LDO1		(0x90)
+#define DA9030_LDO23		(0x91)
+#define DA9030_LDO45		(0x92)
+#define DA9030_LDO6		(0x93)
+#define DA9030_LDO78		(0x94)
+#define DA9030_LDO912		(0x95)
+#define DA9030_BUCK		(0x96)
+#define DA9030_RCTL12		(0x97)
+#define DA9030_RCTL22		(0x98)
+#define DA9030_LDO_UNLOCK	(0xa0)
+#define DA9030_LDO_UNLOCK_MASK	(0xe0)
+#define DA9034_OVER1		(0x10)
+
+/* DA9034 Registers */
+#define DA9034_INVAL		(-1)
+#define DA9034_OVER2		(0x11)
+#define DA9034_OVER3		(0x12)
+#define DA9034_LDO643		(0x13)
+#define DA9034_LDO987		(0x14)
+#define DA9034_LDO1110		(0x15)
+#define DA9034_LDO1312		(0x16)
+#define DA9034_LDO1514		(0x17)
+#define DA9034_VCC1		(0x20)
+#define DA9034_ADTV1		(0x23)
+#define DA9034_ADTV2		(0x24)
+#define DA9034_AVRC		(0x25)
+#define DA9034_CDTV1		(0x26)
+#define DA9034_CDTV2		(0x27)
+#define DA9034_CVRC		(0x28)
+#define DA9034_SDTV1		(0x29)
+#define DA9034_SDTV2		(0x2a)
+#define DA9034_SVRC		(0x2b)
+#define DA9034_MDTV1		(0x32)
+#define DA9034_MDTV2		(0x33)
+#define DA9034_MVRC		(0x34)
+
+/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */
+#define DA9035_OVER3		(0x12)
+#define DA9035_VCC2		(0x1f)
+#define DA9035_3DTV1		(0x2c)
+#define DA9035_3DTV2		(0x2d)
+#define DA9035_3VRC		(0x2e)
+#define DA9035_AUTOSKIP		(0x2f)
+
+struct da903x_regulator_info {
+	struct regulator_desc desc;
+
+	int	max_uV;
+	int	vol_reg;
+	int	vol_shift;
+	int	vol_nbits;
+	int	update_reg;
+	int	update_bit;
+	int	enable_reg;
+	int	enable_bit;
+};
+
+static inline struct device *to_da903x_dev(struct regulator_dev *rdev)
+{
+	return rdev_get_dev(rdev)->parent->parent;
+}
+
+static inline int check_range(struct da903x_regulator_info *info,
+				int min_uV, int max_uV)
+{
+	if (min_uV < info->desc.min_uV || min_uV > info->max_uV)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* DA9030/DA9034 common operations */
+static int da903x_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = to_da903x_dev(rdev);
+	uint8_t val, mask;
+
+	if (rdev->desc->n_voltages == 1)
+		return -EINVAL;
+
+	val = selector << info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+
+	return da903x_update(da9034_dev, info->vol_reg, val, mask);
+}
+
+static int da903x_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = to_da903x_dev(rdev);
+	uint8_t val, mask;
+	int ret;
+
+	if (rdev->desc->n_voltages == 1)
+		return 0;
+
+	ret = da903x_read(da9034_dev, info->vol_reg, &val);
+	if (ret)
+		return ret;
+
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+	val = (val & mask) >> info->vol_shift;
+
+	return val;
+}
+
+static int da903x_enable(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = to_da903x_dev(rdev);
+
+	return da903x_set_bits(da9034_dev, info->enable_reg,
+					1 << info->enable_bit);
+}
+
+static int da903x_disable(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = to_da903x_dev(rdev);
+
+	return da903x_clr_bits(da9034_dev, info->enable_reg,
+					1 << info->enable_bit);
+}
+
+static int da903x_is_enabled(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = to_da903x_dev(rdev);
+	uint8_t reg_val;
+	int ret;
+
+	ret = da903x_read(da9034_dev, info->enable_reg, &reg_val);
+	if (ret)
+		return ret;
+
+	return !!(reg_val & (1 << info->enable_bit));
+}
+
+/* DA9030 specific operations */
+static int da9030_set_ldo1_15_voltage_sel(struct regulator_dev *rdev,
+					  unsigned selector)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da903x_dev = to_da903x_dev(rdev);
+	uint8_t val, mask;
+	int ret;
+
+	val = selector << info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+	val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */
+	mask |= DA9030_LDO_UNLOCK_MASK;
+
+	/* write twice */
+	ret = da903x_update(da903x_dev, info->vol_reg, val, mask);
+	if (ret)
+		return ret;
+
+	return da903x_update(da903x_dev, info->vol_reg, val, mask);
+}
+
+static int da9030_map_ldo14_voltage(struct regulator_dev *rdev,
+				    int min_uV, int max_uV)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	int thresh, sel;
+
+	if (check_range(info, min_uV, max_uV)) {
+		pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
+		return -EINVAL;
+	}
+
+	thresh = (info->max_uV + info->desc.min_uV) / 2;
+	if (min_uV < thresh) {
+		sel = DIV_ROUND_UP(thresh - min_uV, info->desc.uV_step);
+		sel |= 0x4;
+	} else {
+		sel = DIV_ROUND_UP(min_uV - thresh, info->desc.uV_step);
+	}
+
+	return sel;
+}
+
+static int da9030_list_ldo14_voltage(struct regulator_dev *rdev,
+				     unsigned selector)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	int volt;
+
+	if (selector & 0x4)
+		volt = rdev->desc->min_uV +
+		       rdev->desc->uV_step * (3 - (selector & ~0x4));
+	else
+		volt = (info->max_uV + rdev->desc->min_uV) / 2 +
+		       rdev->desc->uV_step * (selector & ~0x4);
+
+	if (volt > info->max_uV)
+		return -EINVAL;
+
+	return volt;
+}
+
+/* DA9034 specific operations */
+static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev,
+				      unsigned selector)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = to_da903x_dev(rdev);
+	uint8_t val, mask;
+	int ret;
+
+	val = selector << info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+
+	ret = da903x_update(da9034_dev, info->vol_reg, val, mask);
+	if (ret)
+		return ret;
+
+	ret = da903x_set_bits(da9034_dev, info->update_reg,
+					1 << info->update_bit);
+	return ret;
+}
+
+static const struct linear_range da9034_ldo12_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000),
+	REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000),
+};
+
+static const struct regulator_ops da903x_regulator_ldo_ops = {
+	.set_voltage_sel = da903x_set_voltage_sel,
+	.get_voltage_sel = da903x_get_voltage_sel,
+	.list_voltage	= regulator_list_voltage_linear,
+	.map_voltage	= regulator_map_voltage_linear,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+/* NOTE: this is dedicated for the insane DA9030 LDO14 */
+static const struct regulator_ops da9030_regulator_ldo14_ops = {
+	.set_voltage_sel = da903x_set_voltage_sel,
+	.get_voltage_sel = da903x_get_voltage_sel,
+	.list_voltage	= da9030_list_ldo14_voltage,
+	.map_voltage	= da9030_map_ldo14_voltage,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+/* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks  */
+static const struct regulator_ops da9030_regulator_ldo1_15_ops = {
+	.set_voltage_sel = da9030_set_ldo1_15_voltage_sel,
+	.get_voltage_sel = da903x_get_voltage_sel,
+	.list_voltage	= regulator_list_voltage_linear,
+	.map_voltage	= regulator_map_voltage_linear,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+static const struct regulator_ops da9034_regulator_dvc_ops = {
+	.set_voltage_sel = da9034_set_dvc_voltage_sel,
+	.get_voltage_sel = da903x_get_voltage_sel,
+	.list_voltage	= regulator_list_voltage_linear,
+	.map_voltage	= regulator_map_voltage_linear,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+/* NOTE: this is dedicated for the insane LDO12 */
+static const struct regulator_ops da9034_regulator_ldo12_ops = {
+	.set_voltage_sel = da903x_set_voltage_sel,
+	.get_voltage_sel = da903x_get_voltage_sel,
+	.list_voltage	= regulator_list_voltage_linear_range,
+	.map_voltage	= regulator_map_voltage_linear_range,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+#define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
+{									\
+	.desc	= {							\
+		.name	= "LDO" #_id,					\
+		.ops	= &da903x_regulator_ldo_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= _pmic##_ID_LDO##_id,				\
+		.n_voltages = (step) ? ((max - min) / step + 1) : 1,	\
+		.owner	= THIS_MODULE,					\
+		.min_uV	 = (min) * 1000,				\
+		.uV_step = (step) * 1000,				\
+	},								\
+	.max_uV		= (max) * 1000,					\
+	.vol_reg	= _pmic##_##vreg,				\
+	.vol_shift	= (shift),					\
+	.vol_nbits	= (nbits),					\
+	.enable_reg	= _pmic##_##ereg,				\
+	.enable_bit	= (ebit),					\
+}
+
+#define DA903x_DVC(_pmic, _id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+{									\
+	.desc	= {							\
+		.name	= #_id,						\
+		.ops	= &da9034_regulator_dvc_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= _pmic##_ID_##_id,				\
+		.n_voltages = (step) ? ((max - min) / step + 1) : 1,	\
+		.owner	= THIS_MODULE,					\
+		.min_uV = (min) * 1000,					\
+		.uV_step = (step) * 1000,				\
+	},								\
+	.max_uV		= (max) * 1000,					\
+	.vol_reg	= _pmic##_##vreg,				\
+	.vol_shift	= (0),						\
+	.vol_nbits	= (nbits),					\
+	.update_reg	= _pmic##_##ureg,				\
+	.update_bit	= (ubit),					\
+	.enable_reg	= _pmic##_##ereg,				\
+	.enable_bit	= (ebit),					\
+}
+
+#define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
+	DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
+
+#define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
+	DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
+
+#define DA9030_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+	DA903x_DVC(DA9030, _id, min, max, step, vreg, nbits, ureg, ubit, \
+		   ereg, ebit)
+
+#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+	DA903x_DVC(DA9034, _id, min, max, step, vreg, nbits, ureg, ubit, \
+		   ereg, ebit)
+
+#define DA9035_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+	DA903x_DVC(DA9035, _id, min, max, step, vreg, nbits, ureg, ubit, \
+		   ereg, ebit)
+
+static struct da903x_regulator_info da903x_regulator_info[] = {
+	/* DA9030 */
+	DA9030_DVC(BUCK2, 850, 1625, 25, BUCK2DVM1, 5, BUCK2DVM1, 7, RCTL11, 0),
+
+	DA9030_LDO( 1, 1200, 3200, 100,    LDO1, 0, 5, RCTL12, 1),
+	DA9030_LDO( 2, 1800, 3200, 100,   LDO23, 0, 4, RCTL12, 2),
+	DA9030_LDO( 3, 1800, 3200, 100,   LDO23, 4, 4, RCTL12, 3),
+	DA9030_LDO( 4, 1800, 3200, 100,   LDO45, 0, 4, RCTL12, 4),
+	DA9030_LDO( 5, 1800, 3200, 100,   LDO45, 4, 4, RCTL12, 5),
+	DA9030_LDO( 6, 1800, 3200, 100,    LDO6, 0, 4, RCTL12, 6),
+	DA9030_LDO( 7, 1800, 3200, 100,   LDO78, 0, 4, RCTL12, 7),
+	DA9030_LDO( 8, 1800, 3200, 100,   LDO78, 4, 4, RCTL22, 0),
+	DA9030_LDO( 9, 1800, 3200, 100,  LDO912, 0, 4, RCTL22, 1),
+	DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2),
+	DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3),
+	DA9030_LDO(12, 1800, 3200, 100,  LDO912, 4, 4, RCTL22, 4),
+	DA9030_LDO(14, 2760, 2940,  30, LDO1416, 0, 3, RCTL11, 4),
+	DA9030_LDO(15, 1100, 2650,  50,	  LDO15, 0, 5, RCTL11, 5),
+	DA9030_LDO(16, 1100, 2650,  50, LDO1416, 3, 5, RCTL11, 6),
+	DA9030_LDO(17, 1800, 3200, 100,   LDO17, 0, 4, RCTL11, 7),
+	DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2),
+	DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1),
+	DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */
+
+	/* DA9034 */
+	DA9034_DVC(BUCK1, 725, 1500, 25, ADTV2, 5, VCC1, 0, OVER1, 0),
+	DA9034_DVC(BUCK2, 725, 1500, 25, CDTV2, 5, VCC1, 2, OVER1, 1),
+	DA9034_DVC(LDO2,  725, 1500, 25, SDTV2, 5, VCC1, 4, OVER1, 2),
+	DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4),
+
+	DA9034_LDO( 3, 1800, 3300, 100,  LDO643, 0, 4, OVER3, 5),
+	DA9034_LDO( 4, 1800, 2900,1100,  LDO643, 4, 1, OVER3, 6),
+	DA9034_LDO( 6, 2500, 2850,  50,  LDO643, 5, 3, OVER2, 0),
+	DA9034_LDO( 7, 2700, 3050,  50,  LDO987, 0, 3, OVER2, 1),
+	DA9034_LDO( 8, 2700, 2850,  50,  LDO987, 3, 2, OVER2, 2),
+	DA9034_LDO( 9, 2700, 3050,  50,  LDO987, 5, 3, OVER2, 3),
+	DA9034_LDO(10, 2700, 3050,  50, LDO1110, 0, 3, OVER2, 4),
+	DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5),
+	DA9034_LDO(12, 1700, 3050,  50, LDO1312, 0, 4, OVER3, 6),
+	DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7),
+	DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0),
+	DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1),
+	DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */
+
+	/* DA9035 */
+	DA9035_DVC(BUCK3, 1800, 2200, 100, 3DTV1, 3, VCC2, 0, OVER3, 3),
+};
+
+static inline struct da903x_regulator_info *find_regulator_info(int id)
+{
+	struct da903x_regulator_info *ri;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) {
+		ri = &da903x_regulator_info[i];
+		if (ri->desc.id == id)
+			return ri;
+	}
+	return NULL;
+}
+
+static int da903x_regulator_probe(struct platform_device *pdev)
+{
+	struct da903x_regulator_info *ri = NULL;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+
+	ri = find_regulator_info(pdev->id);
+	if (ri == NULL) {
+		dev_err(&pdev->dev, "invalid regulator ID specified\n");
+		return -EINVAL;
+	}
+
+	/* Workaround for the weird LDO12 voltage setting */
+	if (ri->desc.id == DA9034_ID_LDO12) {
+		ri->desc.ops = &da9034_regulator_ldo12_ops;
+		ri->desc.n_voltages = 16;
+		ri->desc.linear_ranges = da9034_ldo12_ranges;
+		ri->desc.n_linear_ranges = ARRAY_SIZE(da9034_ldo12_ranges);
+	}
+
+	if (ri->desc.id == DA9030_ID_LDO14)
+		ri->desc.ops = &da9030_regulator_ldo14_ops;
+
+	if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15)
+		ri->desc.ops = &da9030_regulator_ldo1_15_ops;
+
+	config.dev = &pdev->dev;
+	config.init_data = dev_get_platdata(&pdev->dev);
+	config.driver_data = ri;
+
+	rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(&pdev->dev, "failed to register regulator %s\n",
+				ri->desc.name);
+		return PTR_ERR(rdev);
+	}
+
+	platform_set_drvdata(pdev, rdev);
+	return 0;
+}
+
+static struct platform_driver da903x_regulator_driver = {
+	.driver	= {
+		.name	= "da903x-regulator",
+	},
+	.probe		= da903x_regulator_probe,
+};
+
+static int __init da903x_regulator_init(void)
+{
+	return platform_driver_register(&da903x_regulator_driver);
+}
+subsys_initcall(da903x_regulator_init);
+
+static void __exit da903x_regulator_exit(void)
+{
+	platform_driver_unregister(&da903x_regulator_driver);
+}
+module_exit(da903x_regulator_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+	      "Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC");
+MODULE_ALIAS("platform:da903x-regulator");