summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-10 22:58:14 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-10 22:58:14 -0700
commita22a0fdba4191473581f86c9dd5361cf581521d3 (patch)
treeef5d3992f791641d6c8c16cee781f214fecbb105 /drivers/power
parentbf83e61464803d386d0ec3fc92e5449d7963a409 (diff)
parentdb15e6312efd537e2deb2cbad110c23f98704a3c (diff)
downloadlinux-a22a0fdba4191473581f86c9dd5361cf581521d3.tar.bz2
Merge tag 'for-v3.12' of git://git.infradead.org/battery-2.6
Pull battery/power supply driver updates from Anton Vorontsov: "New drivers: - APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM). - Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora). - Texas Instruments BQ24190 charger driver by Mark A. Greer (Animal Creek Technologies). - Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and Marek Belisko (Golden Delicious Computers). The driver is used on Freerunner GTA04 phones. Highlighted fixes and improvements: - Suspend/wakeup logic improvements: power supply objects will block system suspend until all power supply events are processed. Thanks to Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google)" * tag 'for-v3.12' of git://git.infradead.org/battery-2.6: rx51_battery: Fix channel number when reading adc value power: Add twl4030_madc battery driver. bq24190_charger: Workaround SS definition problem on i386 builds power_supply: Prevent suspend until power supply events are processed vexpress-poweroff: Should depend on the required infrastructure twl4030-charger: Fix compiler warning with regulator_enable() rx51_battery: Replace hardcoded channels values. bq24190_charger: Add support for TI BQ24190 Battery Charger ab8500-charger: We print an unintended error message max8925_power: Fix missing of_node_put power_supply: Replace strict_strtol() with kstrtol() power: Add APM X-Gene system reboot driver power_supply: tosa_battery: Get rid of irq_to_gpio usage power supply: collie_battery: Convert to use dev_pm_ops power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST power: reset: Add msm restart support MAINTAINERS: drivers/power: add entry for SmartReflex AVS drivers
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/Kconfig15
-rw-r--r--drivers/power/Makefile2
-rw-r--r--drivers/power/ab8500_charger.c1
-rw-r--r--drivers/power/bq24190_charger.c1549
-rw-r--r--drivers/power/collie_battery.c2
-rw-r--r--drivers/power/max8925_power.c1
-rw-r--r--drivers/power/power_supply_core.c38
-rw-r--r--drivers/power/power_supply_sysfs.c2
-rw-r--r--drivers/power/reset/Kconfig15
-rw-r--r--drivers/power/reset/Makefile2
-rw-r--r--drivers/power/reset/msm-poweroff.c73
-rw-r--r--drivers/power/reset/xgene-reboot.c103
-rw-r--r--drivers/power/rx51_battery.c14
-rw-r--r--drivers/power/tosa_battery.c2
-rw-r--r--drivers/power/twl4030_charger.c7
-rw-r--r--drivers/power/twl4030_madc_battery.c245
16 files changed, 2054 insertions, 17 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 7b8979c63f48..bb49ab684f9a 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -216,6 +216,13 @@ config BATTERY_S3C_ADC
help
Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+config BATTERY_TWL4030_MADC
+ tristate "TWL4030 MADC battery driver"
+ depends on TWL4030_MADC
+ help
+ Say Y here to enable this dumb driver for batteries managed
+ through the TWL4030 MADC.
+
config CHARGER_88PM860X
tristate "Marvell 88PM860x Charger driver"
depends on MFD_88PM860X && BATTERY_88PM860X
@@ -334,6 +341,12 @@ config CHARGER_BQ2415X
You'll need this driver to charge batteries on e.g. Nokia
RX-51/N900.
+config CHARGER_BQ24190
+ tristate "TI BQ24190 battery charger driver"
+ depends on I2C && GPIOLIB
+ help
+ Say Y to enable support for the TI BQ24190 battery charger.
+
config CHARGER_SMB347
tristate "Summit Microelectronics SMB347 Battery Charger"
depends on I2C
@@ -357,7 +370,7 @@ config AB8500_BM
config BATTERY_GOLDFISH
tristate "Goldfish battery driver"
- depends on GENERIC_HARDIRQS
+ depends on GENERIC_HARDIRQS && (GOLDFISH || COMPILE_TEST)
help
Say Y to enable support for the battery and AC power in the
Goldfish emulator.
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 653bf6ceff30..a4b74177706f 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
+obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
@@ -50,6 +51,7 @@ obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
+obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index f098fdafee9f..a4c4a10b3a41 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -774,6 +774,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
di->max_usb_in_curr.usb_type_max);
+ break;
case USB_STAT_NOT_VALID_LINK:
dev_err(di->dev, "USB Type invalid - try charging anyway\n");
di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
diff --git a/drivers/power/bq24190_charger.c b/drivers/power/bq24190_charger.c
new file mode 100644
index 000000000000..ad3ff8fbfbbb
--- /dev/null
+++ b/drivers/power/bq24190_charger.c
@@ -0,0 +1,1549 @@
+/*
+ * Driver for the TI bq24190 battery charger.
+ *
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+
+#include <linux/power/bq24190_charger.h>
+
+
+#define BQ24190_MANUFACTURER "Texas Instruments"
+
+#define BQ24190_REG_ISC 0x00 /* Input Source Control */
+#define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7)
+#define BQ24190_REG_ISC_EN_HIZ_SHIFT 7
+#define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \
+ BIT(3))
+#define BQ24190_REG_ISC_VINDPM_SHIFT 3
+#define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_ISC_IINLIM_SHIFT 0
+
+#define BQ24190_REG_POC 0x01 /* Power-On Configuration */
+#define BQ24190_REG_POC_RESET_MASK BIT(7)
+#define BQ24190_REG_POC_RESET_SHIFT 7
+#define BQ24190_REG_POC_WDT_RESET_MASK BIT(6)
+#define BQ24190_REG_POC_WDT_RESET_SHIFT 6
+#define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4
+#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
+#define BQ24190_REG_POC_SYS_MIN_SHIFT 1
+#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0)
+#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0
+
+#define BQ24190_REG_CCC 0x02 /* Charge Current Control */
+#define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
+ BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CCC_ICHG_SHIFT 2
+#define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0)
+#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0
+
+#define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */
+#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
+ BIT(4))
+#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4
+#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \
+ BIT(0))
+#define BQ24190_REG_PCTCC_ITERM_SHIFT 0
+
+#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */
+#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \
+ BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CVC_VREG_SHIFT 2
+#define BQ24190_REG_CVC_BATLOWV_MASK BIT(1)
+#define BQ24190_REG_CVC_BATLOWV_SHIFT 1
+#define BQ24190_REG_CVC_VRECHG_MASK BIT(0)
+#define BQ24190_REG_CVC_VRECHG_SHIFT 0
+
+#define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */
+#define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7)
+#define BQ24190_REG_CTTC_EN_TERM_SHIFT 7
+#define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6)
+#define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6
+#define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4
+#define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3)
+#define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3
+#define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1))
+#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1
+#define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0)
+#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0
+
+#define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */
+#define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5))
+#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5
+#define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2
+#define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0))
+#define BQ24190_REG_ICTRC_TREG_SHIFT 0
+
+#define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */
+#define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7)
+#define BQ24190_REG_MOC_DPDM_EN_SHIFT 7
+#define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6)
+#define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6
+#define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5)
+#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5
+#define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4)
+#define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4
+#define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0))
+#define BQ24190_REG_MOC_INT_MASK_SHIFT 0
+
+#define BQ24190_REG_SS 0x08 /* System Status */
+#define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6))
+#define BQ24190_REG_SS_VBUS_STAT_SHIFT 6
+#define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_SS_CHRG_STAT_SHIFT 4
+#define BQ24190_REG_SS_DPM_STAT_MASK BIT(3)
+#define BQ24190_REG_SS_DPM_STAT_SHIFT 3
+#define BQ24190_REG_SS_PG_STAT_MASK BIT(2)
+#define BQ24190_REG_SS_PG_STAT_SHIFT 2
+#define BQ24190_REG_SS_THERM_STAT_MASK BIT(1)
+#define BQ24190_REG_SS_THERM_STAT_SHIFT 1
+#define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0)
+#define BQ24190_REG_SS_VSYS_STAT_SHIFT 0
+
+#define BQ24190_REG_F 0x09 /* Fault */
+#define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7)
+#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7
+#define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6)
+#define BQ24190_REG_F_BOOST_FAULT_SHIFT 6
+#define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_F_CHRG_FAULT_SHIFT 4
+#define BQ24190_REG_F_BAT_FAULT_MASK BIT(3)
+#define BQ24190_REG_F_BAT_FAULT_SHIFT 3
+#define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_F_NTC_FAULT_SHIFT 0
+
+#define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */
+#define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3))
+#define BQ24190_REG_VPRS_PN_SHIFT 3
+#define BQ24190_REG_VPRS_PN_24190 0x4
+#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193 */
+#define BQ24190_REG_VPRS_PN_24192I 0x3
+#define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2)
+#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2
+#define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0))
+#define BQ24190_REG_VPRS_DEV_REG_SHIFT 0
+
+/*
+ * The FAULT register is latched by the bq24190 (except for NTC_FAULT)
+ * so the first read after a fault returns the latched value and subsequent
+ * reads return the current value. In order to return the fault status
+ * to the user, have the interrupt handler save the reg's value and retrieve
+ * it in the appropriate health/status routine. Each routine has its own
+ * flag indicating whether it should use the value stored by the last run
+ * of the interrupt handler or do an actual reg read. That way each routine
+ * can report back whatever fault may have occured.
+ */
+struct bq24190_dev_info {
+ struct i2c_client *client;
+ struct device *dev;
+ struct power_supply charger;
+ struct power_supply battery;
+ char model_name[I2C_NAME_SIZE];
+ kernel_ulong_t model;
+ unsigned int gpio_int;
+ unsigned int irq;
+ struct mutex f_reg_lock;
+ bool first_time;
+ bool charger_health_valid;
+ bool battery_health_valid;
+ bool battery_status_valid;
+ u8 f_reg;
+ u8 ss_reg;
+ u8 watchdog;
+};
+
+/*
+ * The tables below provide a 2-way mapping for the value that goes in
+ * the register field and the real-world value that it represents.
+ * The index of the array is the value that goes in the register; the
+ * number at that index in the array is the real-world value that it
+ * represents.
+ */
+/* REG02[7:2] (ICHG) in uAh */
+static const int bq24190_ccc_ichg_values[] = {
+ 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000,
+ 1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000,
+ 1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000,
+ 2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000,
+ 2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000,
+ 3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000,
+ 3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000,
+ 4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000
+};
+
+/* REG04[7:2] (VREG) in uV */
+static const int bq24190_cvc_vreg_values[] = {
+ 3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000,
+ 3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000,
+ 3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000,
+ 3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000,
+ 4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000,
+ 4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000,
+ 4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000,
+ 4400000
+};
+
+/* REG06[1:0] (TREG) in tenths of degrees Celcius */
+static const int bq24190_ictrc_treg_values[] = {
+ 600, 800, 1000, 1200
+};
+
+/*
+ * Return the index in 'tbl' of greatest value that is less than or equal to
+ * 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that
+ * the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
+ * is less than 2^8.
+ */
+static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v)
+{
+ int i;
+
+ for (i = 1; i < tbl_size; i++)
+ if (v < tbl[i])
+ break;
+
+ return i - 1;
+}
+
+/* Basic driver I/O routines */
+
+static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(bdi->client, reg);
+ if (ret < 0)
+ return ret;
+
+ *data = ret;
+ return 0;
+}
+
+static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data)
+{
+ return i2c_smbus_write_byte_data(bdi->client, reg, data);
+}
+
+static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg,
+ u8 mask, u8 shift, u8 *data)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read(bdi, reg, &v);
+ if (ret < 0)
+ return ret;
+
+ v &= mask;
+ v >>= shift;
+ *data = v;
+
+ return 0;
+}
+
+static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg,
+ u8 mask, u8 shift, u8 data)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read(bdi, reg, &v);
+ if (ret < 0)
+ return ret;
+
+ v &= ~mask;
+ v |= ((data << shift) & mask);
+
+ return bq24190_write(bdi, reg, v);
+}
+
+static int bq24190_get_field_val(struct bq24190_dev_info *bdi,
+ u8 reg, u8 mask, u8 shift,
+ const int tbl[], int tbl_size,
+ int *val)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, reg, mask, shift, &v);
+ if (ret < 0)
+ return ret;
+
+ v = (v >= tbl_size) ? (tbl_size - 1) : v;
+ *val = tbl[v];
+
+ return 0;
+}
+
+static int bq24190_set_field_val(struct bq24190_dev_info *bdi,
+ u8 reg, u8 mask, u8 shift,
+ const int tbl[], int tbl_size,
+ int val)
+{
+ u8 idx;
+
+ idx = bq24190_find_idx(tbl, tbl_size, val);
+
+ return bq24190_write_mask(bdi, reg, mask, shift, idx);
+}
+
+#ifdef CONFIG_SYSFS
+/*
+ * There are a numerous options that are configurable on the bq24190
+ * that go well beyond what the power_supply properties provide access to.
+ * Provide sysfs access to them so they can be examined and possibly modified
+ * on the fly. They will be provided for the charger power_supply object only
+ * and will be prefixed by 'f_' to make them easier to recognize.
+ */
+
+#define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \
+{ \
+ .attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \
+ .reg = BQ24190_REG_##r, \
+ .mask = BQ24190_REG_##r##_##f##_MASK, \
+ .shift = BQ24190_REG_##r##_##f##_SHIFT, \
+}
+
+#define BQ24190_SYSFS_FIELD_RW(_name, r, f) \
+ BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \
+ bq24190_sysfs_store)
+
+#define BQ24190_SYSFS_FIELD_RO(_name, r, f) \
+ BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL)
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t bq24190_sysfs_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count);
+
+struct bq24190_sysfs_field_info {
+ struct device_attribute attr;
+ u8 reg;
+ u8 mask;
+ u8 shift;
+};
+
+/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */
+#undef SS
+
+static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = {
+ /* sysfs name reg field in reg */
+ BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ),
+ BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM),
+ BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM),
+ BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG),
+ BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN),
+ BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM),
+ BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG),
+ BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT),
+ BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG),
+ BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM),
+ BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG),
+ BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV),
+ BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG),
+ BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM),
+ BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT),
+ BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG),
+ BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER),
+ BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER),
+ BQ24190_SYSFS_FIELD_RW(jeta_iset, CTTC, JEITA_ISET),
+ BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP),
+ BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP),
+ BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG),
+ BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN),
+ BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN),
+ BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE),
+ BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET),
+ BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK),
+ BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT),
+ BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT),
+ BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT),
+ BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT),
+ BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT),
+ BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT),
+ BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT),
+ BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT),
+ BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT),
+ BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT),
+ BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT),
+ BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN),
+ BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE),
+ BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG),
+};
+
+static struct attribute *
+ bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1];
+
+static const struct attribute_group bq24190_sysfs_attr_group = {
+ .attrs = bq24190_sysfs_attrs,
+};
+
+static void bq24190_sysfs_init_attrs(void)
+{
+ int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+ for (i = 0; i < limit; i++)
+ bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr;
+
+ bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */
+}
+
+static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup(
+ const char *name)
+{
+ int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+ for (i = 0; i < limit; i++)
+ if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name))
+ break;
+
+ if (i >= limit)
+ return NULL;
+
+ return &bq24190_sysfs_field_tbl[i];
+}
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24190_dev_info *bdi =
+ container_of(psy, struct bq24190_dev_info, charger);
+ struct bq24190_sysfs_field_info *info;
+ int ret;
+ u8 v;
+
+ info = bq24190_sysfs_field_lookup(attr->attr.name);
+ if (!info)
+ return -EINVAL;
+
+ ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
+}
+
+static ssize_t bq24190_sysfs_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24190_dev_info *bdi =
+ container_of(psy, struct bq24190_dev_info, charger);
+ struct bq24190_sysfs_field_info *info;
+ int ret;
+ u8 v;
+
+ info = bq24190_sysfs_field_lookup(attr->attr.name);
+ if (!info)
+ return -EINVAL;
+
+ ret = kstrtou8(buf, 0, &v);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
+{
+ bq24190_sysfs_init_attrs();
+
+ return sysfs_create_group(&bdi->charger.dev->kobj,
+ &bq24190_sysfs_attr_group);
+}
+
+static void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi)
+{
+ sysfs_remove_group(&bdi->charger.dev->kobj, &bq24190_sysfs_attr_group);
+}
+#else
+static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
+{
+ return 0;
+}
+
+static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {}
+#endif
+
+/*
+ * According to the "Host Mode and default Mode" section of the
+ * manual, a write to any register causes the bq24190 to switch
+ * from default mode to host mode. It will switch back to default
+ * mode after a WDT timeout unless the WDT is turned off as well.
+ * So, by simply turning off the WDT, we accomplish both with the
+ * same write.
+ */
+static int bq24190_set_mode_host(struct bq24190_dev_info *bdi)
+{
+ int ret;
+ u8 v;
+
+ ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v);
+ if (ret < 0)
+ return ret;
+
+ bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
+ BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+ v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
+
+ return bq24190_write(bdi, BQ24190_REG_CTTC, v);
+}
+
+static int bq24190_register_reset(struct bq24190_dev_info *bdi)
+{
+ int ret, limit = 100;
+ u8 v;
+
+ /* Reset the registers */
+ ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_RESET_MASK,
+ BQ24190_REG_POC_RESET_SHIFT,
+ 0x1);
+ if (ret < 0)
+ return ret;
+
+ /* Reset bit will be cleared by hardware so poll until it is */
+ do {
+ ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_RESET_MASK,
+ BQ24190_REG_POC_RESET_SHIFT,
+ &v);
+ if (ret < 0)
+ return ret;
+
+ if (!v)
+ break;
+
+ udelay(10);
+ } while (--limit);
+
+ if (!limit)
+ return -EIO;
+
+ return 0;
+}
+
+/* Charger power supply property routines */
+
+static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int type, ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+ &v);
+ if (ret < 0)
+ return ret;
+
+ /* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */
+ if (!v) {
+ type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ } else {
+ ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+ &v);
+ if (ret < 0)
+ return ret;
+
+ type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE :
+ POWER_SUPPLY_CHARGE_TYPE_FAST;
+ }
+
+ val->intval = type;
+
+ return 0;
+}
+
+static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ u8 chg_config, force_20pct, en_term;
+ int ret;
+
+ /*
+ * According to the "Termination when REG02[0] = 1" section of
+ * the bq24190 manual, the trickle charge could be less than the
+ * termination current so it recommends turning off the termination
+ * function.
+ *
+ * Note: AFAICT from the datasheet, the user will have to manually
+ * turn off the charging when in 20% mode. If its not turned off,
+ * there could be battery damage. So, use this mode at your own risk.
+ */
+ switch (val->intval) {
+ case POWER_SUPPLY_CHARGE_TYPE_NONE:
+ chg_config = 0x0;
+ break;
+ case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+ chg_config = 0x1;
+ force_20pct = 0x1;
+ en_term = 0x0;
+ break;
+ case POWER_SUPPLY_CHARGE_TYPE_FAST:
+ chg_config = 0x1;
+ force_20pct = 0x0;
+ en_term = 0x1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (chg_config) { /* Enabling the charger */
+ ret = bq24190_write_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+ force_20pct);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC,
+ BQ24190_REG_CTTC_EN_TERM_MASK,
+ BQ24190_REG_CTTC_EN_TERM_SHIFT,
+ en_term);
+ if (ret < 0)
+ return ret;
+ }
+
+ return bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config);
+}
+
+static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int health, ret;
+
+ mutex_lock(&bdi->f_reg_lock);
+
+ if (bdi->charger_health_valid) {
+ v = bdi->f_reg;
+ bdi->charger_health_valid = false;
+ mutex_unlock(&bdi->f_reg_lock);
+ } else {
+ mutex_unlock(&bdi->f_reg_lock);
+
+ ret = bq24190_read(bdi, BQ24190_REG_F, &v);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
+ /*
+ * This could be over-current or over-voltage but there's
+ * no way to tell which. Return 'OVERVOLTAGE' since there
+ * isn't an 'OVERCURRENT' value defined that we can return
+ * even if it was over-current.
+ */
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else {
+ v &= BQ24190_REG_F_CHRG_FAULT_MASK;
+ v >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
+
+ switch (v) {
+ case 0x0: /* Normal */
+ health = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */
+ /*
+ * This could be over-voltage or under-voltage
+ * and there's no way to tell which. Instead
+ * of looking foolish and returning 'OVERVOLTAGE'
+ * when its really under-voltage, just return
+ * 'UNSPEC_FAILURE'.
+ */
+ health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ case 0x2: /* Thermal Shutdown */
+ health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ case 0x3: /* Charge Safety Timer Expiration */
+ health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ break;
+ default:
+ health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+ }
+
+ val->intval = health;
+
+ return 0;
+}
+
+static int bq24190_charger_get_online(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_SS,
+ BQ24190_REG_SS_PG_STAT_MASK,
+ BQ24190_REG_SS_PG_STAT_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ val->intval = v;
+ return 0;
+}
+
+static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int curr, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+ bq24190_ccc_ichg_values,
+ ARRAY_SIZE(bq24190_ccc_ichg_values), &curr);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ /* If FORCE_20PCT is enabled, then current is 20% of ICHG value */
+ if (v)
+ curr /= 5;
+
+ val->intval = curr;
+ return 0;
+}
+
+static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1;
+
+ val->intval = bq24190_ccc_ichg_values[idx];
+ return 0;
+}
+
+static int bq24190_charger_set_current(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ u8 v;
+ int ret, curr = val->intval;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ /* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */
+ if (v)
+ curr *= 5;
+
+ return bq24190_set_field_val(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+ bq24190_ccc_ichg_values,
+ ARRAY_SIZE(bq24190_ccc_ichg_values), curr);
+}
+
+static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int voltage, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC,
+ BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+ bq24190_cvc_vreg_values,
+ ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage);
+ if (ret < 0)
+ return ret;
+
+ val->intval = voltage;
+ return 0;
+}
+
+static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1;
+
+ val->intval = bq24190_cvc_vreg_values[idx];
+ return 0;
+}
+
+static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_set_field_val(bdi, BQ24190_REG_CVC,
+ BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+ bq24190_cvc_vreg_values,
+ ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
+}
+
+static int bq24190_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi =
+ container_of(psy, struct bq24190_dev_info, charger);
+ int ret;
+
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ pm_runtime_get_sync(bdi->dev);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = bq24190_charger_get_charge_type(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq24190_charger_get_health(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = bq24190_charger_get_online(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq24190_charger_get_current(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ ret = bq24190_charger_get_current_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq24190_charger_get_voltage(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ ret = bq24190_charger_get_voltage_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bdi->model_name;
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ24190_MANUFACTURER;
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ }
+
+ pm_runtime_put_sync(bdi->dev);
+ return ret;
+}
+
+static int bq24190_charger_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi =
+ container_of(psy, struct bq24190_dev_info, charger);
+ int ret;
+
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ pm_runtime_get_sync(bdi->dev);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = bq24190_charger_set_charge_type(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq24190_charger_set_current(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq24190_charger_set_voltage(bdi, val);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ pm_runtime_put_sync(bdi->dev);
+ return ret;
+}
+
+static int bq24190_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property bq24190_charger_properties[] = {
+ POWER_SUPPLY_PROP_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static char *bq24190_charger_supplied_to[] = {
+ "main-battery",
+};
+
+static void bq24190_charger_init(struct power_supply *charger)
+{
+ charger->name = "bq24190-charger";
+ charger->type = POWER_SUPPLY_TYPE_USB;
+ charger->properties = bq24190_charger_properties;
+ charger->num_properties = ARRAY_SIZE(bq24190_charger_properties);
+ charger->supplied_to = bq24190_charger_supplied_to;
+ charger->num_supplies = ARRAY_SIZE(bq24190_charger_supplied_to);
+ charger->get_property = bq24190_charger_get_property;
+ charger->set_property = bq24190_charger_set_property;
+ charger->property_is_writeable = bq24190_charger_property_is_writeable;
+}
+
+/* Battery power supply property routines */
+
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 ss_reg, chrg_fault;
+ int status, ret;
+
+ mutex_lock(&bdi->f_reg_lock);
+
+ if (bdi->battery_status_valid) {
+ chrg_fault = bdi->f_reg;
+ bdi->battery_status_valid = false;
+ mutex_unlock(&bdi->f_reg_lock);
+ } else {
+ mutex_unlock(&bdi->f_reg_lock);
+
+ ret = bq24190_read(bdi, BQ24190_REG_F, &chrg_fault);
+ if (ret < 0)
+ return ret;
+ }
+
+ chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
+ chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
+
+ ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The battery must be discharging when any of these are true:
+ * - there is no good power source;
+ * - there is a charge fault.
+ * Could also be discharging when in "supplement mode" but
+ * there is no way to tell when its in that mode.
+ */
+ if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) {
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+ } else {
+ ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK;
+ ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT;
+
+ switch (ss_reg) {
+ case 0x0: /* Not Charging */
+ status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case 0x1: /* Pre-charge */
+ case 0x2: /* Fast Charging */
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case 0x3: /* Charge Termination Done */
+ status = POWER_SUPPLY_STATUS_FULL;
+ break;
+ default:
+ ret = -EIO;
+ }
+ }
+
+ if (!ret)
+ val->intval = status;
+
+ return ret;
+}
+
+static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int health, ret;
+
+ mutex_lock(&bdi->f_reg_lock);
+
+ if (bdi->battery_health_valid) {
+ v = bdi->f_reg;
+ bdi->battery_health_valid = false;
+ mutex_unlock(&bdi->f_reg_lock);
+ } else {
+ mutex_unlock(&bdi->f_reg_lock);
+
+ ret = bq24190_read(bdi, BQ24190_REG_F, &v);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else {
+ v &= BQ24190_REG_F_NTC_FAULT_MASK;
+ v >>= BQ24190_REG_F_NTC_FAULT_SHIFT;
+
+ switch (v) {
+ case 0x0: /* Normal */
+ health = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case 0x1: /* TS1 Cold */
+ case 0x3: /* TS2 Cold */
+ case 0x5: /* Both Cold */
+ health = POWER_SUPPLY_HEALTH_COLD;
+ break;
+ case 0x2: /* TS1 Hot */
+ case 0x4: /* TS2 Hot */
+ case 0x6: /* Both Hot */
+ health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ default:
+ health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+ }
+
+ val->intval = health;
+ return 0;
+}
+
+static int bq24190_battery_get_online(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 batfet_disable;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+ BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+ BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+ if (ret < 0)
+ return ret;
+
+ val->intval = !batfet_disable;
+ return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_write_mask(bdi, BQ24190_REG_MOC,
+ BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+ BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval);
+}
+
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int temp, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC,
+ BQ24190_REG_ICTRC_TREG_MASK,
+ BQ24190_REG_ICTRC_TREG_SHIFT,
+ bq24190_ictrc_treg_values,
+ ARRAY_SIZE(bq24190_ictrc_treg_values), &temp);
+ if (ret < 0)
+ return ret;
+
+ val->intval = temp;
+ return 0;
+}
+
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC,
+ BQ24190_REG_ICTRC_TREG_MASK,
+ BQ24190_REG_ICTRC_TREG_SHIFT,
+ bq24190_ictrc_treg_values,
+ ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval);
+}
+
+static int bq24190_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi =
+ container_of(psy, struct bq24190_dev_info, battery);
+ int ret;
+
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ pm_runtime_get_sync(bdi->dev);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq24190_battery_get_status(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq24190_battery_get_health(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = bq24190_battery_get_online(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ /* Could be Li-on or Li-polymer but no way to tell which */
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = bq24190_battery_get_temp_alert_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ }
+
+ pm_runtime_put_sync(bdi->dev);
+ return ret;
+}
+
+static int bq24190_battery_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi =
+ container_of(psy, struct bq24190_dev_info, battery);
+ int ret;
+
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ pm_runtime_put_sync(bdi->dev);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = bq24190_battery_set_online(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = bq24190_battery_set_temp_alert_max(bdi, val);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ pm_runtime_put_sync(bdi->dev);
+ return ret;
+}
+
+static int bq24190_battery_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property bq24190_battery_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+ POWER_SUPPLY_PROP_SCOPE,
+};
+
+static void bq24190_battery_init(struct power_supply *battery)
+{
+ battery->name = "bq24190-battery";
+ battery->type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->properties = bq24190_battery_properties;
+ battery->num_properties = ARRAY_SIZE(bq24190_battery_properties);
+ battery->get_property = bq24190_battery_get_property;
+ battery->set_property = bq24190_battery_set_property;
+ battery->property_is_writeable = bq24190_battery_property_is_writeable;
+}
+
+static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
+{
+ struct bq24190_dev_info *bdi = data;
+ bool alert_userspace = false;
+ u8 ss_reg, f_reg;
+ int ret;
+
+ pm_runtime_get_sync(bdi->dev);
+
+ ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+ if (ret < 0) {
+ dev_err(bdi->dev, "Can't read SS reg: %d\n", ret);
+ goto out;
+ }
+
+ if (ss_reg != bdi->ss_reg) {
+ /*
+ * The device is in host mode so when PG_STAT goes from 1->0
+ * (i.e., power removed) HIZ needs to be disabled.
+ */
+ if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
+ !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
+ ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_EN_HIZ_MASK,
+ BQ24190_REG_ISC_EN_HIZ_SHIFT,
+ 0);
+ if (ret < 0)
+ dev_err(bdi->dev, "Can't access ISC reg: %d\n",
+ ret);
+ }
+
+ bdi->ss_reg = ss_reg;
+ alert_userspace = true;
+ }
+
+ mutex_lock(&bdi->f_reg_lock);
+
+ ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
+ if (ret < 0) {
+ mutex_unlock(&bdi->f_reg_lock);
+ dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
+ goto out;
+ }
+
+ if (f_reg != bdi->f_reg) {
+ bdi->f_reg = f_reg;
+ bdi->charger_health_valid = true;
+ bdi->battery_health_valid = true;
+ bdi->battery_status_valid = true;
+
+ alert_userspace = true;
+ }
+
+ mutex_unlock(&bdi->f_reg_lock);
+
+ /*
+ * Sometimes bq24190 gives a steady trickle of interrupts even
+ * though the watchdog timer is turned off and neither the STATUS
+ * nor FAULT registers have changed. Weed out these sprurious
+ * interrupts so userspace isn't alerted for no reason.
+ * In addition, the chip always generates an interrupt after
+ * register reset so we should ignore that one (the very first
+ * interrupt received).
+ */
+ if (alert_userspace && !bdi->first_time) {
+ power_supply_changed(&bdi->charger);
+ power_supply_changed(&bdi->battery);
+ bdi->first_time = false;
+ }
+
+out:
+ pm_runtime_put_sync(bdi->dev);
+
+ dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg);
+
+ return IRQ_HANDLED;
+}
+
+static int bq24190_hw_init(struct bq24190_dev_info *bdi)
+{
+ u8 v;
+ int ret;
+
+ pm_runtime_get_sync(bdi->dev);
+
+ /* First check that the device really is what its supposed to be */
+ ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
+ BQ24190_REG_VPRS_PN_MASK,
+ BQ24190_REG_VPRS_PN_SHIFT,
+ &v);
+ if (ret < 0)
+ goto out;
+
+ if (v != bdi->model) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = bq24190_register_reset(bdi);
+ if (ret < 0)
+ goto out;
+
+ ret = bq24190_set_mode_host(bdi);
+out:
+ pm_runtime_put_sync(bdi->dev);
+ return ret;
+}
+
+#ifdef CONFIG_OF
+static int bq24190_setup_dt(struct bq24190_dev_info *bdi)
+{
+ bdi->irq = irq_of_parse_and_map(bdi->dev->of_node, 0);
+ if (bdi->irq <= 0)
+ return -1;
+
+ return 0;
+}
+#else
+static int bq24190_setup_dt(struct bq24190_dev_info *bdi)
+{
+ return -1;
+}
+#endif
+
+static int bq24190_setup_pdata(struct bq24190_dev_info *bdi,
+ struct bq24190_platform_data *pdata)
+{
+ int ret;
+
+ if (!gpio_is_valid(pdata->gpio_int))
+ return -1;
+
+ ret = gpio_request(pdata->gpio_int, dev_name(bdi->dev));
+ if (ret < 0)
+ return -1;
+
+ ret = gpio_direction_input(pdata->gpio_int);
+ if (ret < 0)
+ goto out;
+
+ bdi->irq = gpio_to_irq(pdata->gpio_int);
+ if (!bdi->irq)
+ goto out;
+
+ bdi->gpio_int = pdata->gpio_int;
+ return 0;
+
+out:
+ gpio_free(pdata->gpio_int);
+ return -1;
+}
+
+static int bq24190_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct device *dev = &client->dev;
+ struct bq24190_platform_data *pdata = client->dev.platform_data;
+ struct bq24190_dev_info *bdi;
+ int ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+ return -ENODEV;
+ }
+
+ bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
+ if (!bdi) {
+ dev_err(dev, "Can't alloc bdi struct\n");
+ return -ENOMEM;
+ }
+
+ bdi->client = client;
+ bdi->dev = dev;
+ bdi->model = id->driver_data;
+ strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
+ mutex_init(&bdi->f_reg_lock);
+ bdi->first_time = true;
+ bdi->charger_health_valid = false;
+ bdi->battery_health_valid = false;
+ bdi->battery_status_valid = false;
+
+ i2c_set_clientdata(client, bdi);
+
+ if (dev->of_node)
+ ret = bq24190_setup_dt(bdi);
+ else
+ ret = bq24190_setup_pdata(bdi, pdata);
+
+ if (ret) {
+ dev_err(dev, "Can't get irq info\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
+ bq24190_irq_handler_thread,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "bq24190-charger", bdi);
+ if (ret < 0) {
+ dev_err(dev, "Can't set up irq handler\n");
+ goto out1;
+ }
+
+ pm_runtime_enable(dev);
+ pm_runtime_resume(dev);
+
+ ret = bq24190_hw_init(bdi);
+ if (ret < 0) {
+ dev_err(dev, "Hardware init failed\n");
+ goto out2;
+ }
+
+ bq24190_charger_init(&bdi->charger);
+
+ ret = power_supply_register(dev, &bdi->charger);
+ if (ret) {
+ dev_err(dev, "Can't register charger\n");
+ goto out2;
+ }
+
+ bq24190_battery_init(&bdi->battery);
+
+ ret = power_supply_register(dev, &bdi->battery);
+ if (ret) {
+ dev_err(dev, "Can't register battery\n");
+ goto out3;
+ }
+
+ ret = bq24190_sysfs_create_group(bdi);
+ if (ret) {
+ dev_err(dev, "Can't create sysfs entries\n");
+ goto out4;
+ }
+
+ return 0;
+
+out4:
+ power_supply_unregister(&bdi->battery);
+out3:
+ power_supply_unregister(&bdi->charger);
+out2:
+ pm_runtime_disable(dev);
+out1:
+ if (bdi->gpio_int)
+ gpio_free(bdi->gpio_int);
+
+ return ret;
+}
+
+static int bq24190_remove(struct i2c_client *client)
+{
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+ pm_runtime_get_sync(bdi->dev);
+ bq24190_register_reset(bdi);
+ pm_runtime_put_sync(bdi->dev);
+
+ bq24190_sysfs_remove_group(bdi);
+ power_supply_unregister(&bdi->battery);
+ power_supply_unregister(&bdi->charger);
+ pm_runtime_disable(bdi->dev);
+
+ if (bdi->gpio_int)
+ gpio_free(bdi->gpio_int);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bq24190_pm_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+ pm_runtime_get_sync(bdi->dev);
+ bq24190_register_reset(bdi);
+ pm_runtime_put_sync(bdi->dev);
+
+ return 0;
+}
+
+static int bq24190_pm_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+ bdi->charger_health_valid = false;
+ bdi->battery_health_valid = false;
+ bdi->battery_status_valid = false;
+
+ pm_runtime_get_sync(bdi->dev);
+ bq24190_register_reset(bdi);
+ pm_runtime_put_sync(bdi->dev);
+
+ /* Things may have changed while suspended so alert upper layer */
+ power_supply_changed(&bdi->charger);
+ power_supply_changed(&bdi->battery);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bq24190_pm_ops, bq24190_pm_suspend, bq24190_pm_resume);
+
+/*
+ * Only support the bq24190 right now. The bq24192, bq24192i, and bq24193
+ * are similar but not identical so the driver needs to be extended to
+ * support them.
+ */
+static const struct i2c_device_id bq24190_i2c_ids[] = {
+ { "bq24190", BQ24190_REG_VPRS_PN_24190 },
+ { },
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq24190_of_match[] = {
+ { .compatible = "ti,bq24190", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq24190_of_match);
+#else
+static const struct of_device_id bq24190_of_match[] = {
+ { },
+};
+#endif
+
+static struct i2c_driver bq24190_driver = {
+ .probe = bq24190_probe,
+ .remove = bq24190_remove,
+ .id_table = bq24190_i2c_ids,
+ .driver = {
+ .name = "bq24190-charger",
+ .owner = THIS_MODULE,
+ .pm = &bq24190_pm_ops,
+ .of_match_table = of_match_ptr(bq24190_of_match),
+ },
+};
+module_i2c_driver(bq24190_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_ALIAS("i2c:bq24190-charger");
+MODULE_DESCRIPTION("TI BQ24190 Charger Driver");
diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c
index c58d0e31bdef..d02ae02a7590 100644
--- a/drivers/power/collie_battery.c
+++ b/drivers/power/collie_battery.c
@@ -287,7 +287,7 @@ static struct gpio collie_batt_gpios[] = {
};
#ifdef CONFIG_PM
-static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state)
+static int collie_bat_suspend(struct ucb1x00_dev *dev)
{
/* flush all pending status updates */
flush_work(&bat_work);
diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
index 0ee1e14f76e9..b4513f284bbc 100644
--- a/drivers/power/max8925_power.c
+++ b/drivers/power/max8925_power.c
@@ -458,6 +458,7 @@ max8925_power_dt_init(struct platform_device *pdev)
of_property_read_u32(np, "fast-charge", &fast_charge);
of_property_read_u32(np, "no-insert-detect", &no_insert_detect);
of_property_read_u32(np, "no-temp-support", &no_temp_support);
+ of_node_put(np);
pdata->batt_detect = batt_detect;
pdata->fast_charge = fast_charge;
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 3b2d5df45e7a..00e667296360 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -67,23 +67,42 @@ static int __power_supply_changed_work(struct device *dev, void *data)
static void power_supply_changed_work(struct work_struct *work)
{
+ unsigned long flags;
struct power_supply *psy = container_of(work, struct power_supply,
changed_work);
dev_dbg(psy->dev, "%s\n", __func__);
- class_for_each_device(power_supply_class, NULL, psy,
- __power_supply_changed_work);
-
- power_supply_update_leds(psy);
-
- kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
+ spin_lock_irqsave(&psy->changed_lock, flags);
+ if (psy->changed) {
+ psy->changed = false;
+ spin_unlock_irqrestore(&psy->changed_lock, flags);
+ class_for_each_device(power_supply_class, NULL, psy,
+ __power_supply_changed_work);
+ power_supply_update_leds(psy);
+ kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
+ spin_lock_irqsave(&psy->changed_lock, flags);
+ }
+ /*
+ * Dependent power supplies (e.g. battery) may have changed state
+ * as a result of this event, so poll again and hold the
+ * wakeup_source until all events are processed.
+ */
+ if (!psy->changed)
+ pm_relax(psy->dev);
+ spin_unlock_irqrestore(&psy->changed_lock, flags);
}
void power_supply_changed(struct power_supply *psy)
{
+ unsigned long flags;
+
dev_dbg(psy->dev, "%s\n", __func__);
+ spin_lock_irqsave(&psy->changed_lock, flags);
+ psy->changed = true;
+ pm_stay_awake(psy->dev);
+ spin_unlock_irqrestore(&psy->changed_lock, flags);
schedule_work(&psy->changed_work);
}
EXPORT_SYMBOL_GPL(power_supply_changed);
@@ -500,6 +519,11 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
goto check_supplies_failed;
}
+ spin_lock_init(&psy->changed_lock);
+ rc = device_init_wakeup(dev, true);
+ if (rc)
+ goto wakeup_init_failed;
+
rc = kobject_set_name(&dev->kobj, "%s", psy->name);
if (rc)
goto kobject_set_name_failed;
@@ -529,6 +553,7 @@ create_triggers_failed:
register_cooler_failed:
psy_unregister_thermal(psy);
register_thermal_failed:
+wakeup_init_failed:
device_del(dev);
kobject_set_name_failed:
device_add_failed:
@@ -546,6 +571,7 @@ void power_supply_unregister(struct power_supply *psy)
power_supply_remove_triggers(psy);
psy_unregister_cooler(psy);
psy_unregister_thermal(psy);
+ device_init_wakeup(psy->dev, false);
device_unregister(psy->dev);
}
EXPORT_SYMBOL_GPL(power_supply_unregister);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 29178f78d73c..44420d1e9094 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -118,7 +118,7 @@ static ssize_t power_supply_store_property(struct device *dev,
long long_val;
/* TODO: support other types than int */
- ret = strict_strtol(buf, 10, &long_val);
+ ret = kstrtol(buf, 10, &long_val);
if (ret < 0)
return ret;
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index ee039dcead04..9b3ea535b472 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -14,6 +14,12 @@ config POWER_RESET_GPIO
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
+config POWER_RESET_MSM
+ bool "Qualcomm MSM power-off driver"
+ depends on POWER_RESET && ARCH_MSM
+ help
+ Power off and restart support for Qualcomm boards.
+
config POWER_RESET_QNAP
bool "QNAP power-off driver"
depends on OF_GPIO && POWER_RESET && PLAT_ORION
@@ -34,7 +40,14 @@ config POWER_RESET_RESTART
config POWER_RESET_VEXPRESS
bool "ARM Versatile Express power-off and reset driver"
depends on ARM || ARM64
- depends on POWER_RESET
+ depends on POWER_RESET && VEXPRESS_CONFIG
help
Power off and reset support for the ARM Ltd. Versatile
Express boards.
+
+config POWER_RESET_XGENE
+ bool "APM SoC X-Gene reset driver"
+ depends on ARM64
+ depends on POWER_RESET
+ help
+ Reboot support for the APM SoC X-Gene Eval boards.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 372807fd83f7..3e6ed88725ac 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1,4 +1,6 @@
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
+obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
diff --git a/drivers/power/reset/msm-poweroff.c b/drivers/power/reset/msm-poweroff.c
new file mode 100644
index 000000000000..774f9a3b310d
--- /dev/null
+++ b/drivers/power/reset/msm-poweroff.c
@@ -0,0 +1,73 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+static void __iomem *msm_ps_hold;
+
+static void do_msm_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+ writel(0, msm_ps_hold);
+ mdelay(10000);
+}
+
+static void do_msm_poweroff(void)
+{
+ /* TODO: Add poweroff capability */
+ do_msm_restart(REBOOT_HARD, NULL);
+}
+
+static int msm_restart_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *mem;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ msm_ps_hold = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(msm_ps_hold))
+ return PTR_ERR(msm_ps_hold);
+
+ pm_power_off = do_msm_poweroff;
+ arm_pm_restart = do_msm_restart;
+ return 0;
+}
+
+static const struct of_device_id of_msm_restart_match[] = {
+ { .compatible = "qcom,pshold", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_msm_restart_match);
+
+static struct platform_driver msm_restart_driver = {
+ .probe = msm_restart_probe,
+ .driver = {
+ .name = "msm-restart",
+ .of_match_table = of_match_ptr(of_msm_restart_match),
+ },
+};
+
+static int __init msm_restart_init(void)
+{
+ return platform_driver_register(&msm_restart_driver);
+}
+device_initcall(msm_restart_init);
diff --git a/drivers/power/reset/xgene-reboot.c b/drivers/power/reset/xgene-reboot.c
new file mode 100644
index 000000000000..ecd55f81b9d1
--- /dev/null
+++ b/drivers/power/reset/xgene-reboot.c
@@ -0,0 +1,103 @@
+/*
+ * AppliedMicro X-Gene SoC Reboot Driver
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ * Author: Loc Ho <lho@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This driver provides system reboot functionality for APM X-Gene SoC.
+ * For system shutdown, this is board specify. If a board designer
+ * implements GPIO shutdown, use the gpio-poweroff.c driver.
+ */
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <asm/system_misc.h>
+
+struct xgene_reboot_context {
+ struct platform_device *pdev;
+ void *csr;
+ u32 mask;
+};
+
+static struct xgene_reboot_context *xgene_restart_ctx;
+
+static void xgene_restart(char str, const char *cmd)
+{
+ struct xgene_reboot_context *ctx = xgene_restart_ctx;
+ unsigned long timeout;
+
+ /* Issue the reboot */
+ if (ctx)
+ writel(ctx->mask, ctx->csr);
+
+ timeout = jiffies + HZ;
+ while (time_before(jiffies, timeout))
+ cpu_relax();
+
+ dev_emerg(&ctx->pdev->dev, "Unable to restart system\n");
+}
+
+static int xgene_reboot_probe(struct platform_device *pdev)
+{
+ struct xgene_reboot_context *ctx;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx) {
+ dev_err(&pdev->dev, "out of memory for context\n");
+ return -ENODEV;
+ }
+
+ ctx->csr = of_iomap(pdev->dev.of_node, 0);
+ if (!ctx->csr) {
+ devm_kfree(&pdev->dev, ctx);
+ dev_err(&pdev->dev, "can not map resource\n");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(pdev->dev.of_node, "mask", &ctx->mask))
+ ctx->mask = 0xFFFFFFFF;
+
+ ctx->pdev = pdev;
+ arm_pm_restart = xgene_restart;
+ xgene_restart_ctx = ctx;
+
+ return 0;
+}
+
+static struct of_device_id xgene_reboot_of_match[] = {
+ { .compatible = "apm,xgene-reboot" },
+ {}
+};
+
+static struct platform_driver xgene_reboot_driver = {
+ .probe = xgene_reboot_probe,
+ .driver = {
+ .name = "xgene-reboot",
+ .of_match_table = xgene_reboot_of_match,
+ },
+};
+
+static int __init xgene_reboot_init(void)
+{
+ return platform_driver_register(&xgene_reboot_driver);
+}
+device_initcall(xgene_reboot_init);
diff --git a/drivers/power/rx51_battery.c b/drivers/power/rx51_battery.c
index 8a6288d87056..1bc5857b8bd5 100644
--- a/drivers/power/rx51_battery.c
+++ b/drivers/power/rx51_battery.c
@@ -25,6 +25,10 @@
#include <linux/slab.h>
#include <linux/i2c/twl4030-madc.h>
+/* RX51 specific channels */
+#define TWL4030_MADC_BTEMP_RX51 TWL4030_MADC_ADCIN0
+#define TWL4030_MADC_BCI_RX51 TWL4030_MADC_ADCIN4
+
struct rx51_device_info {
struct device *dev;
struct power_supply bat;
@@ -37,7 +41,7 @@ static int rx51_battery_read_adc(int channel)
{
struct twl4030_madc_request req;
- req.channels = 1 << channel;
+ req.channels = channel;
req.do_avg = 1;
req.method = TWL4030_MADC_SW1;
req.func_cb = NULL;
@@ -47,7 +51,7 @@ static int rx51_battery_read_adc(int channel)
if (twl4030_madc_conversion(&req) <= 0)
return -ENODATA;
- return req.rbuf[channel];
+ return req.rbuf[ffs(channel) - 1];
}
/*
@@ -56,7 +60,7 @@ static int rx51_battery_read_adc(int channel)
*/
static int rx51_battery_read_voltage(struct rx51_device_info *di)
{
- int voltage = rx51_battery_read_adc(12);
+ int voltage = rx51_battery_read_adc(TWL4030_MADC_VBAT);
if (voltage < 0)
return voltage;
@@ -108,7 +112,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di)
{
int min = 0;
int max = ARRAY_SIZE(rx51_temp_table2) - 1;
- int raw = rx51_battery_read_adc(0);
+ int raw = rx51_battery_read_adc(TWL4030_MADC_BTEMP_RX51);
/* Zero and negative values are undefined */
if (raw <= 0)
@@ -142,7 +146,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di)
*/
static int rx51_battery_read_capacity(struct rx51_device_info *di)
{
- int capacity = rx51_battery_read_adc(4);
+ int capacity = rx51_battery_read_adc(TWL4030_MADC_BCI_RX51);
if (capacity < 0)
return capacity;
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
index 0224de50c540..f4d80df627c7 100644
--- a/drivers/power/tosa_battery.c
+++ b/drivers/power/tosa_battery.c
@@ -150,7 +150,7 @@ static void tosa_bat_external_power_changed(struct power_supply *psy)
static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
{
- pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+ pr_info("tosa_bat_gpio irq\n");
schedule_work(&bat_work);
return IRQ_HANDLED;
}
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index be98e70380f9..d98abe911e37 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -189,7 +189,12 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
/* Need to keep regulator on */
if (!bci->usb_enabled) {
- regulator_enable(bci->usb_reg);
+ ret = regulator_enable(bci->usb_reg);
+ if (ret) {
+ dev_err(bci->dev,
+ "Failed to enable regulator\n");
+ return ret;
+ }
bci->usb_enabled = 1;
}
diff --git a/drivers/power/twl4030_madc_battery.c b/drivers/power/twl4030_madc_battery.c
new file mode 100644
index 000000000000..7ef445a6cfa6
--- /dev/null
+++ b/drivers/power/twl4030_madc_battery.c
@@ -0,0 +1,245 @@
+/*
+ * Dumb driver for LiIon batteries using TWL4030 madc.
+ *
+ * Copyright 2013 Golden Delicious Computers
+ * Lukas Märdian <lukas@goldelico.com>
+ *
+ * Based on dumb driver for gta01 battery
+ * Copyright 2009 Openmoko, Inc
+ * Balaji Rao <balajirrao@openmoko.org>
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/i2c/twl4030-madc.h>
+#include <linux/power/twl4030_madc_battery.h>
+
+struct twl4030_madc_battery {
+ struct power_supply psy;
+ struct twl4030_madc_bat_platform_data *pdata;
+};
+
+static enum power_supply_property twl4030_madc_bat_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+};
+
+static int madc_read(int index)
+{
+ struct twl4030_madc_request req;
+ int val;
+
+ req.channels = index;
+ req.method = TWL4030_MADC_SW2;
+ req.type = TWL4030_MADC_WAIT;
+ req.do_avg = 0;
+ req.raw = false;
+ req.func_cb = NULL;
+
+ val = twl4030_madc_conversion(&req);
+ if (val < 0)
+ return val;
+
+ return req.rbuf[ffs(index) - 1];
+}
+
+static int twl4030_madc_bat_get_charging_status(void)
+{
+ return (madc_read(TWL4030_MADC_ICHG) > 0) ? 1 : 0;
+}
+
+static int twl4030_madc_bat_get_voltage(void)
+{
+ return madc_read(TWL4030_MADC_VBAT);
+}
+
+static int twl4030_madc_bat_get_current(void)
+{
+ return madc_read(TWL4030_MADC_ICHG) * 1000;
+}
+
+static int twl4030_madc_bat_get_temp(void)
+{
+ return madc_read(TWL4030_MADC_BTEMP) * 10;
+}
+
+static int twl4030_madc_bat_voltscale(struct twl4030_madc_battery *bat,
+ int volt)
+{
+ struct twl4030_madc_bat_calibration *calibration;
+ int i, res = 0;
+
+ /* choose charging curve */
+ if (twl4030_madc_bat_get_charging_status())
+ calibration = bat->pdata->charging;
+ else
+ calibration = bat->pdata->discharging;
+
+ if (volt > calibration[0].voltage) {
+ res = calibration[0].level;
+ } else {
+ for (i = 0; calibration[i+1].voltage >= 0; i++) {
+ if (volt <= calibration[i].voltage &&
+ volt >= calibration[i+1].voltage) {
+ /* interval found - interpolate within range */
+ res = calibration[i].level -
+ ((calibration[i].voltage - volt) *
+ (calibration[i].level -
+ calibration[i+1].level)) /
+ (calibration[i].voltage -
+ calibration[i+1].voltage);
+ break;
+ }
+ }
+ }
+ return res;
+}
+
+static int twl4030_madc_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct twl4030_madc_battery *bat = container_of(psy,
+ struct twl4030_madc_battery, psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage()) > 95)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else {
+ if (twl4030_madc_bat_get_charging_status())
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = twl4030_madc_bat_get_voltage() * 1000;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = twl4030_madc_bat_get_current();
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ /* assume battery is always present */
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW: {
+ int percent = twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage());
+ val->intval = (percent * bat->pdata->capacity) / 100;
+ break;
+ }
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage());
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = bat->pdata->capacity;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = twl4030_madc_bat_get_temp();
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: {
+ int percent = twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage());
+ /* in mAh */
+ int chg = (percent * (bat->pdata->capacity/1000))/100;
+
+ /* assume discharge with 400 mA (ca. 1.5W) */
+ val->intval = (3600l * chg) / 400;
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void twl4030_madc_bat_ext_changed(struct power_supply *psy)
+{
+ struct twl4030_madc_battery *bat = container_of(psy,
+ struct twl4030_madc_battery, psy);
+
+ power_supply_changed(&bat->psy);
+}
+
+static int twl4030_cmp(const void *a, const void *b)
+{
+ return ((struct twl4030_madc_bat_calibration *)b)->voltage -
+ ((struct twl4030_madc_bat_calibration *)a)->voltage;
+}
+
+static int twl4030_madc_battery_probe(struct platform_device *pdev)
+{
+ struct twl4030_madc_battery *twl4030_madc_bat;
+ struct twl4030_madc_bat_platform_data *pdata = pdev->dev.platform_data;
+
+ twl4030_madc_bat = kzalloc(sizeof(*twl4030_madc_bat), GFP_KERNEL);
+ if (!twl4030_madc_bat)
+ return -ENOMEM;
+
+ twl4030_madc_bat->psy.name = "twl4030_battery";
+ twl4030_madc_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+ twl4030_madc_bat->psy.properties = twl4030_madc_bat_props;
+ twl4030_madc_bat->psy.num_properties =
+ ARRAY_SIZE(twl4030_madc_bat_props);
+ twl4030_madc_bat->psy.get_property = twl4030_madc_bat_get_property;
+ twl4030_madc_bat->psy.external_power_changed =
+ twl4030_madc_bat_ext_changed;
+
+ /* sort charging and discharging calibration data */
+ sort(pdata->charging, pdata->charging_size,
+ sizeof(struct twl4030_madc_bat_calibration),
+ twl4030_cmp, NULL);
+ sort(pdata->discharging, pdata->discharging_size,
+ sizeof(struct twl4030_madc_bat_calibration),
+ twl4030_cmp, NULL);
+
+ twl4030_madc_bat->pdata = pdata;
+ platform_set_drvdata(pdev, twl4030_madc_bat);
+ power_supply_register(&pdev->dev, &twl4030_madc_bat->psy);
+
+ return 0;
+}
+
+static int twl4030_madc_battery_remove(struct platform_device *pdev)
+{
+ struct twl4030_madc_battery *bat = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&bat->psy);
+ kfree(bat);
+
+ return 0;
+}
+
+static struct platform_driver twl4030_madc_battery_driver = {
+ .driver = {
+ .name = "twl4030_madc_battery",
+ },
+ .probe = twl4030_madc_battery_probe,
+ .remove = twl4030_madc_battery_remove,
+};
+module_platform_driver(twl4030_madc_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lukas Märdian <lukas@goldelico.com>");
+MODULE_DESCRIPTION("twl4030_madc battery driver");