diff options
| author | Geert Uytterhoeven <geert+renesas@glider.be> | 2018-12-06 17:30:39 +0100 |
|---|---|---|
| committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2018-12-18 11:02:33 +0100 |
| commit | f4caa6ee736fa8a46c806ba4382c16f7e5a20248 (patch) | |
| tree | 101374be1d971b3af220d60884995963448794fa /drivers/pinctrl | |
| parent | 3f3327dbc5596076f94695d8d4cc66da3d5027fb (diff) | |
| download | linux-f4caa6ee736fa8a46c806ba4382c16f7e5a20248.tar.bz2 | |
pinctrl: sh-pfc: r8a77990: Add support for pull-up only pins
The R-Car Gen3 HardWare Manual Errata for Rev. 1.00 (Jul 2, 2018) states
that the USB30_OVC pin supports pull-up only. It has a bit assigned in
the pull-enable register (PUEN5), but not in the pull-up/down control
register (PUD5).
Add a check for this, to prevent configuring a prohibited setting.
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 83f6941a42a5e773 ("pinctrl: sh-pfc: r8a77990: Add bias pinconf support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Diffstat (limited to 'drivers/pinctrl')
| -rw-r--r-- | drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 23 |
1 files changed, 18 insertions, 5 deletions
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c index 8c06d7275389..784d4400c3e0 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c @@ -4914,6 +4914,17 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = { { /* sentinel */ }, }; +static bool pin_has_pud(unsigned int pin) +{ + /* Some pins are pull-up only */ + switch (pin) { + case RCAR_GP_PIN(6, 9): /* USB30_OVC */ + return false; + } + + return true; +} + static unsigned int r8a77990_pinmux_get_bias(struct sh_pfc *pfc, unsigned int pin) { @@ -4926,7 +4937,7 @@ static unsigned int r8a77990_pinmux_get_bias(struct sh_pfc *pfc, if (!(sh_pfc_read(pfc, reg->puen) & BIT(bit))) return PIN_CONFIG_BIAS_DISABLE; - else if (sh_pfc_read(pfc, reg->pud) & BIT(bit)) + else if (!pin_has_pud(pin) || (sh_pfc_read(pfc, reg->pud) & BIT(bit))) return PIN_CONFIG_BIAS_PULL_UP; else return PIN_CONFIG_BIAS_PULL_DOWN; @@ -4947,11 +4958,13 @@ static void r8a77990_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, if (bias != PIN_CONFIG_BIAS_DISABLE) enable |= BIT(bit); - updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); - if (bias == PIN_CONFIG_BIAS_PULL_UP) - updown |= BIT(bit); + if (pin_has_pud(pin)) { + updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); + if (bias == PIN_CONFIG_BIAS_PULL_UP) + updown |= BIT(bit); - sh_pfc_write(pfc, reg->pud, updown); + sh_pfc_write(pfc, reg->pud, updown); + } sh_pfc_write(pfc, reg->puen, enable); } |