summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-xway.c
diff options
context:
space:
mode:
authorJohn Crispin <blogic@openwrt.org>2013-02-01 13:04:55 +0100
committerLinus Walleij <linus.walleij@linaro.org>2013-02-05 16:17:21 +0100
commit362ba3cfb45a68d12b6b7d2584eda6df28c77bcb (patch)
treece551347652c2bf61d428aadcbd066cd863b1d7c /drivers/pinctrl/pinctrl-xway.c
parentd41e35c364391d5c80467f62eecec8c4c65342f4 (diff)
downloadlinux-362ba3cfb45a68d12b6b7d2584eda6df28c77bcb.tar.bz2
pinctrl/lantiq: pinconf uses port instead of pin
The XWAY pinctrl driver invalidly uses the port and not the pin number to work out the registers and bits to be set for the opendrain and pullup/down resistors. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-xway.c')
-rw-r--r--drivers/pinctrl/pinctrl-xway.c28
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
index 5f0eb04c2336..69dec9b191d9 100644
--- a/drivers/pinctrl/pinctrl-xway.c
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
if (port == PORT3)
reg = GPIO3_OD;
else
- reg = GPIO_OD(port);
+ reg = GPIO_OD(pin);
*config = LTQ_PINCONF_PACK(param,
- !!gpio_getbit(info->membase[0], reg, PORT_PIN(port)));
+ !!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
break;
case LTQ_PINCONF_PARAM_PULL:
if (port == PORT3)
reg = GPIO3_PUDEN;
else
- reg = GPIO_PUDEN(port);
- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) {
+ reg = GPIO_PUDEN(pin);
+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) {
*config = LTQ_PINCONF_PACK(param, 0);
break;
}
@@ -459,8 +459,8 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
if (port == PORT3)
reg = GPIO3_PUDSEL;
else
- reg = GPIO_PUDSEL(port);
- if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port)))
+ reg = GPIO_PUDSEL(pin);
+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)))
*config = LTQ_PINCONF_PACK(param, 2);
else
*config = LTQ_PINCONF_PACK(param, 1);
@@ -488,29 +488,29 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev,
if (port == PORT3)
reg = GPIO3_OD;
else
- reg = GPIO_OD(port);
- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ reg = GPIO_OD(pin);
+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
break;
case LTQ_PINCONF_PARAM_PULL:
if (port == PORT3)
reg = GPIO3_PUDEN;
else
- reg = GPIO_PUDEN(port);
+ reg = GPIO_PUDEN(pin);
if (arg == 0) {
- gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
break;
}
- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
if (port == PORT3)
reg = GPIO3_PUDSEL;
else
- reg = GPIO_PUDSEL(port);
+ reg = GPIO_PUDSEL(pin);
if (arg == 1)
- gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
else if (arg == 2)
- gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
else
dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
break;