Merge tag 'pinctrl-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pincontrol updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.1 development
  cycle.  Nothing really exciting this time: we basically added a few
  new drivers and subdrivers and stabilized them in linux-next.  Some
  cleanups too.  With sunrisepoint Intel has a real fine fully featured
  pin control driver for contemporary hardware, and the AMD driver is
  also for large deployments.  Most of the others are ARM devices.

  New drivers:
    - Intel Sunrisepoint
    - AMD KERNCZ GPIO
    - Broadcom Cygnus IOMUX

  New subdrivers:
    - Marvell MVEBU Armada 39x SoCs
    - Samsung Exynos 5433
    - nVidia Tegra 210
    - Mediatek MT8135
    - Mediatek MT8173
    - AMLogic Meson8b
    - Qualcomm PM8916

  On top of this cleanups and development history for the above drivers
  as issues were fixed after merging"

* tag 'pinctrl-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
  pinctrl: sirf: move sgpio lock into state container
  pinctrl: Add support for PM8916 GPIO's and MPP's
  pinctrl: bcm2835: Fix support for threaded level triggered IRQs
  sh-pfc: r8a7790: add EtherAVB pin groups
  pinctrl: Document "function" + "pins" pinmux binding
  pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support
  pinctrl: fsl: imx: Check for 0 config register
  pinctrl: Add support for Meson8b
  documentation: Extend pinctrl docs for Meson8b
  pinctrl: Cleanup Meson8 driver
  Fix inconsistent spinlock of AMD GPIO driver which can be recognized by static analysis tool smatch. Declare constant Variables with Sparse's suggestion.
  pinctrl: at91: convert __raw to endian agnostic IO
  pinctrl: constify of_device_id array
  pinctrl: pinconf-generic: add dt node names to error messages
  pinctrl: pinconf-generic: scan also referenced phandle node
  pinctrl: mvebu: add suspend/resume support to Armada XP pinctrl driver
  pinctrl: st: Display pin's function when printing pinctrl debug information
  pinctrl: st: Show correct pin direction also in GPIO mode
  pinctrl: st: Supply a GPIO get_direction() call-back
  pinctrl: st: Move st_get_pio_control() further up the source file
  ...

1 files changed, 17 insertions, 14 deletions

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index ee9f44ad7f02..c6f299ba25cb 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -67,23 +67,20 @@ config PINCTRL_AT91
 	help
 	  Say Y here to enable the at91 pinctrl driver
 
-config PINCTRL_BCM2835
-	bool
-	select PINMUX
-	select PINCONF
-
-config PINCTRL_BCM281XX
-	bool "Broadcom BCM281xx pinctrl driver"
-	depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
-	select PINMUX
+config PINCTRL_AMD
+	bool "AMD GPIO pin control"
+	depends on GPIOLIB
+	select GPIOLIB_IRQCHIP
 	select PINCONF
 	select GENERIC_PINCONF
-	select REGMAP_MMIO
 	help
-	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
-	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
-	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
-	  framework.  GPIO is provided by a separate GPIO driver.
+	  driver for memory mapped GPIO functionality on AMD platforms
+	  (x86 or arm).Most pins are usually muxed to some other
+	  functionality by firmware,so only a small amount is available
+	  for gpio use.
+
+	  Requires ACPI/FDT device enumeration code to set up a platform
+	  device.
 
 config PINCTRL_LANTIQ
 	bool
@@ -154,6 +151,10 @@ config PINCTRL_TEGRA124
 	bool
 	select PINCTRL_TEGRA
 
+config PINCTRL_TEGRA210
+	bool
+	select PINCTRL_TEGRA
+
 config PINCTRL_TEGRA_XUSB
 	def_bool y if ARCH_TEGRA
 	select GENERIC_PHY
@@ -207,6 +208,7 @@ config PINCTRL_ZYNQ
 	help
 	  This selectes the pinctrl driver for Xilinx Zynq.
 
+source "drivers/pinctrl/bcm/Kconfig"
 source "drivers/pinctrl/berlin/Kconfig"
 source "drivers/pinctrl/freescale/Kconfig"
 source "drivers/pinctrl/intel/Kconfig"
@@ -218,6 +220,7 @@ source "drivers/pinctrl/sh-pfc/Kconfig"
 source "drivers/pinctrl/spear/Kconfig"
 source "drivers/pinctrl/sunxi/Kconfig"
 source "drivers/pinctrl/vt8500/Kconfig"
+source "drivers/pinctrl/mediatek/Kconfig"
 
 config PINCTRL_XWAY
 	bool