diff options
| author | Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> | 2018-09-21 20:53:20 +0900 |
|---|---|---|
| committer | Kishon Vijay Abraham I <kishon@ti.com> | 2018-09-25 16:10:10 +0530 |
| commit | 8dde0008ffc9e2e214ef916821959fe6706ff9f0 (patch) | |
| tree | 316da8835b3aa0aec1c5f32177fa99ac60411c45 /drivers/phy | |
| parent | cfdc66348eed22211f277c4bd668ac935b8b3470 (diff) | |
| download | linux-8dde0008ffc9e2e214ef916821959fe6706ff9f0.tar.bz2 | |
phy: renesas: rcar-gen3-usb2: Check a property to use otg pins
Since All R-Car Gen3 SoCs have dedicated otg pins actually but
some boards don't use the otg pins (e.g. R-Car D3 Draak and R-Car E3
Ebisu), the driver should not choose SoC model base by using
rcar_gen3_phy_usb2_match_table's data. So, this patch checks a
"renesas,no-otg-pins" property to set the "uses_otg_pins".
Note that since r8a77995-draak.dts and r8a77990-ebisu.dts don't have
'dr_mode = "otg";' for now, if we apply this patch, no behavior
changes (the value of "uses_otg_pins" is false).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/renesas/phy-rcar-gen3-usb2.c | 24 |
1 files changed, 6 insertions, 18 deletions
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index d69317ea95c9..856056e14b26 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -78,8 +78,6 @@ #define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */ #define USB2_ADPCTRL_DRVVBUS BIT(4) -#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS 1 - struct rcar_gen3_chan { void __iomem *base; struct extcon_dev *extcon; @@ -385,21 +383,10 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) } static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { - { - .compatible = "renesas,usb2-phy-r8a7795", - .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS, - }, - { - .compatible = "renesas,usb2-phy-r8a7796", - .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS, - }, - { - .compatible = "renesas,usb2-phy-r8a77965", - .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS, - }, - { - .compatible = "renesas,rcar-gen3-usb2-phy", - }, + { .compatible = "renesas,usb2-phy-r8a7795" }, + { .compatible = "renesas,usb2-phy-r8a7796" }, + { .compatible = "renesas,usb2-phy-r8a77965" }, + { .compatible = "renesas,rcar-gen3-usb2-phy" }, { } }; MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table); @@ -445,7 +432,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) { int ret; - channel->uses_otg_pins = (uintptr_t)of_device_get_match_data(dev); + channel->uses_otg_pins = !of_property_read_bool(dev->of_node, + "renesas,no-otg-pins"); channel->extcon = devm_extcon_dev_allocate(dev, rcar_gen3_phy_cable); if (IS_ERR(channel->extcon)) |