summaryrefslogtreecommitdiffstats
path: root/drivers/perf
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-07-08 09:54:55 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-07-08 09:54:55 -0700
commitdfd437a257924484b144ee750e60affc95562c6d (patch)
treed692781730ed72743b8abbc42a04a176cb2f1d6d /drivers/perf
parent0ecfebd2b52404ae0c54a878c872bb93363ada36 (diff)
parent0c61efd322b75ed3143e3d130ebecbebf561adf5 (diff)
downloadlinux-dfd437a257924484b144ee750e60affc95562c6d.tar.bz2
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
Diffstat (limited to 'drivers/perf')
-rw-r--r--drivers/perf/Kconfig8
-rw-r--r--drivers/perf/Makefile1
-rw-r--r--drivers/perf/arm_pmu_acpi.c72
-rw-r--r--drivers/perf/arm_spe_pmu.c12
-rw-r--r--drivers/perf/fsl_imx8_ddr_perf.c554
5 files changed, 645 insertions, 2 deletions
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index e4221a107dca..09ae8a970880 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -71,6 +71,14 @@ config ARM_DSU_PMU
system, control logic. The PMU allows counting various events related
to DSU.
+config FSL_IMX8_DDR_PMU
+ tristate "Freescale i.MX8 DDR perf monitor"
+ depends on ARCH_MXC
+ help
+ Provides support for the DDR performance monitor in i.MX8, which
+ can give information about memory throughput and other related
+ events.
+
config HISI_PMU
bool "HiSilicon SoC PMU"
depends on ARM64 && ACPI
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 30489941f3d6..2ebb4de17815 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_ARM_DSU_PMU) += arm_dsu_pmu.o
obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o
obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
obj-$(CONFIG_ARM_SMMU_V3_PMU) += arm_smmuv3_pmu.o
+obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
obj-$(CONFIG_HISI_PMU) += hisilicon/
obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu.o
obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
index d2c2978409d2..acce8781c456 100644
--- a/drivers/perf/arm_pmu_acpi.c
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -71,6 +71,76 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
acpi_unregister_gsi(gsi);
}
+#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
+static struct resource spe_resources[] = {
+ {
+ /* irq */
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device spe_dev = {
+ .name = ARMV8_SPE_PDEV_NAME,
+ .id = -1,
+ .resource = spe_resources,
+ .num_resources = ARRAY_SIZE(spe_resources)
+};
+
+/*
+ * For lack of a better place, hook the normal PMU MADT walk
+ * and create a SPE device if we detect a recent MADT with
+ * a homogeneous PPI mapping.
+ */
+static void arm_spe_acpi_register_device(void)
+{
+ int cpu, hetid, irq, ret;
+ bool first = true;
+ u16 gsi = 0;
+
+ /*
+ * Sanity check all the GICC tables for the same interrupt number.
+ * For now, we only support homogeneous ACPI/SPE machines.
+ */
+ for_each_possible_cpu(cpu) {
+ struct acpi_madt_generic_interrupt *gicc;
+
+ gicc = acpi_cpu_get_madt_gicc(cpu);
+ if (gicc->header.length < ACPI_MADT_GICC_SPE)
+ return;
+
+ if (first) {
+ gsi = gicc->spe_interrupt;
+ if (!gsi)
+ return;
+ hetid = find_acpi_cpu_topology_hetero_id(cpu);
+ first = false;
+ } else if ((gsi != gicc->spe_interrupt) ||
+ (hetid != find_acpi_cpu_topology_hetero_id(cpu))) {
+ pr_warn("ACPI: SPE must be homogeneous\n");
+ return;
+ }
+ }
+
+ irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE,
+ ACPI_ACTIVE_HIGH);
+ if (irq < 0) {
+ pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi);
+ return;
+ }
+
+ spe_resources[0].start = irq;
+ ret = platform_device_register(&spe_dev);
+ if (ret < 0) {
+ pr_warn("ACPI: SPE: Unable to register device\n");
+ acpi_unregister_gsi(gsi);
+ }
+}
+#else
+static inline void arm_spe_acpi_register_device(void)
+{
+}
+#endif /* CONFIG_ARM_SPE_PMU */
+
static int arm_pmu_acpi_parse_irqs(void)
{
int irq, cpu, irq_cpu, err;
@@ -276,6 +346,8 @@ static int arm_pmu_acpi_init(void)
if (acpi_disabled)
return 0;
+ arm_spe_acpi_register_device();
+
ret = arm_pmu_acpi_parse_irqs();
if (ret)
return ret;
diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
index 49b490925255..4e4984a55cd1 100644
--- a/drivers/perf/arm_spe_pmu.c
+++ b/drivers/perf/arm_spe_pmu.c
@@ -27,6 +27,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/perf_event.h>
+#include <linux/perf/arm_pmu.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#include <linux/slab.h>
@@ -1157,7 +1158,13 @@ static const struct of_device_id arm_spe_pmu_of_match[] = {
};
MODULE_DEVICE_TABLE(of, arm_spe_pmu_of_match);
-static int arm_spe_pmu_device_dt_probe(struct platform_device *pdev)
+static const struct platform_device_id arm_spe_match[] = {
+ { ARMV8_SPE_PDEV_NAME, 0},
+ { }
+};
+MODULE_DEVICE_TABLE(platform, arm_spe_match);
+
+static int arm_spe_pmu_device_probe(struct platform_device *pdev)
{
int ret;
struct arm_spe_pmu *spe_pmu;
@@ -1217,11 +1224,12 @@ static int arm_spe_pmu_device_remove(struct platform_device *pdev)
}
static struct platform_driver arm_spe_pmu_driver = {
+ .id_table = arm_spe_match,
.driver = {
.name = DRVNAME,
.of_match_table = of_match_ptr(arm_spe_pmu_of_match),
},
- .probe = arm_spe_pmu_device_dt_probe,
+ .probe = arm_spe_pmu_device_probe,
.remove = arm_spe_pmu_device_remove,
};
diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c
new file mode 100644
index 000000000000..63fe21600072
--- /dev/null
+++ b/drivers/perf/fsl_imx8_ddr_perf.c
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2017 NXP
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/perf_event.h>
+#include <linux/slab.h>
+
+#define COUNTER_CNTL 0x0
+#define COUNTER_READ 0x20
+
+#define COUNTER_DPCR1 0x30
+
+#define CNTL_OVER 0x1
+#define CNTL_CLEAR 0x2
+#define CNTL_EN 0x4
+#define CNTL_EN_MASK 0xFFFFFFFB
+#define CNTL_CLEAR_MASK 0xFFFFFFFD
+#define CNTL_OVER_MASK 0xFFFFFFFE
+
+#define CNTL_CSV_SHIFT 24
+#define CNTL_CSV_MASK (0xFF << CNTL_CSV_SHIFT)
+
+#define EVENT_CYCLES_ID 0
+#define EVENT_CYCLES_COUNTER 0
+#define NUM_COUNTERS 4
+
+#define to_ddr_pmu(p) container_of(p, struct ddr_pmu, pmu)
+
+#define DDR_PERF_DEV_NAME "imx8_ddr"
+#define DDR_CPUHP_CB_NAME DDR_PERF_DEV_NAME "_perf_pmu"
+
+static DEFINE_IDA(ddr_ida);
+
+static const struct of_device_id imx_ddr_pmu_dt_ids[] = {
+ { .compatible = "fsl,imx8-ddr-pmu",},
+ { .compatible = "fsl,imx8m-ddr-pmu",},
+ { /* sentinel */ }
+};
+
+struct ddr_pmu {
+ struct pmu pmu;
+ void __iomem *base;
+ unsigned int cpu;
+ struct hlist_node node;
+ struct device *dev;
+ struct perf_event *events[NUM_COUNTERS];
+ int active_events;
+ enum cpuhp_state cpuhp_state;
+ int irq;
+ int id;
+};
+
+static ssize_t ddr_perf_cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ddr_pmu *pmu = dev_get_drvdata(dev);
+
+ return cpumap_print_to_pagebuf(true, buf, cpumask_of(pmu->cpu));
+}
+
+static struct device_attribute ddr_perf_cpumask_attr =
+ __ATTR(cpumask, 0444, ddr_perf_cpumask_show, NULL);
+
+static struct attribute *ddr_perf_cpumask_attrs[] = {
+ &ddr_perf_cpumask_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ddr_perf_cpumask_attr_group = {
+ .attrs = ddr_perf_cpumask_attrs,
+};
+
+static ssize_t
+ddr_pmu_event_show(struct device *dev, struct device_attribute *attr,
+ char *page)
+{
+ struct perf_pmu_events_attr *pmu_attr;
+
+ pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+ return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
+#define IMX8_DDR_PMU_EVENT_ATTR(_name, _id) \
+ (&((struct perf_pmu_events_attr[]) { \
+ { .attr = __ATTR(_name, 0444, ddr_pmu_event_show, NULL),\
+ .id = _id, } \
+ })[0].attr.attr)
+
+static struct attribute *ddr_perf_events_attrs[] = {
+ IMX8_DDR_PMU_EVENT_ATTR(cycles, EVENT_CYCLES_ID),
+ IMX8_DDR_PMU_EVENT_ATTR(selfresh, 0x01),
+ IMX8_DDR_PMU_EVENT_ATTR(read-accesses, 0x04),
+ IMX8_DDR_PMU_EVENT_ATTR(write-accesses, 0x05),
+ IMX8_DDR_PMU_EVENT_ATTR(read-queue-depth, 0x08),
+ IMX8_DDR_PMU_EVENT_ATTR(write-queue-depth, 0x09),
+ IMX8_DDR_PMU_EVENT_ATTR(lp-read-credit-cnt, 0x10),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-read-credit-cnt, 0x11),
+ IMX8_DDR_PMU_EVENT_ATTR(write-credit-cnt, 0x12),
+ IMX8_DDR_PMU_EVENT_ATTR(read-command, 0x20),
+ IMX8_DDR_PMU_EVENT_ATTR(write-command, 0x21),
+ IMX8_DDR_PMU_EVENT_ATTR(read-modify-write-command, 0x22),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-read, 0x23),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-req-nocredit, 0x24),
+ IMX8_DDR_PMU_EVENT_ATTR(hp-xact-credit, 0x25),
+ IMX8_DDR_PMU_EVENT_ATTR(lp-req-nocredit, 0x26),
+ IMX8_DDR_PMU_EVENT_ATTR(lp-xact-credit, 0x27),
+ IMX8_DDR_PMU_EVENT_ATTR(wr-xact-credit, 0x29),
+ IMX8_DDR_PMU_EVENT_ATTR(read-cycles, 0x2a),
+ IMX8_DDR_PMU_EVENT_ATTR(write-cycles, 0x2b),
+ IMX8_DDR_PMU_EVENT_ATTR(read-write-transition, 0x30),
+ IMX8_DDR_PMU_EVENT_ATTR(precharge, 0x31),
+ IMX8_DDR_PMU_EVENT_ATTR(activate, 0x32),
+ IMX8_DDR_PMU_EVENT_ATTR(load-mode, 0x33),
+ IMX8_DDR_PMU_EVENT_ATTR(perf-mwr, 0x34),
+ IMX8_DDR_PMU_EVENT_ATTR(read, 0x35),
+ IMX8_DDR_PMU_EVENT_ATTR(read-activate, 0x36),
+ IMX8_DDR_PMU_EVENT_ATTR(refresh, 0x37),
+ IMX8_DDR_PMU_EVENT_ATTR(write, 0x38),
+ IMX8_DDR_PMU_EVENT_ATTR(raw-hazard, 0x39),
+ NULL,
+};
+
+static struct attribute_group ddr_perf_events_attr_group = {
+ .name = "events",
+ .attrs = ddr_perf_events_attrs,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *ddr_perf_format_attrs[] = {
+ &format_attr_event.attr,
+ NULL,
+};
+
+static struct attribute_group ddr_perf_format_attr_group = {
+ .name = "format",
+ .attrs = ddr_perf_format_attrs,
+};
+
+static const struct attribute_group *attr_groups[] = {
+ &ddr_perf_events_attr_group,
+ &ddr_perf_format_attr_group,
+ &ddr_perf_cpumask_attr_group,
+ NULL,
+};
+
+static u32 ddr_perf_alloc_counter(struct ddr_pmu *pmu, int event)
+{
+ int i;
+
+ /*
+ * Always map cycle event to counter 0
+ * Cycles counter is dedicated for cycle event
+ * can't used for the other events
+ */
+ if (event == EVENT_CYCLES_ID) {
+ if (pmu->events[EVENT_CYCLES_COUNTER] == NULL)
+ return EVENT_CYCLES_COUNTER;
+ else
+ return -ENOENT;
+ }
+
+ for (i = 1; i < NUM_COUNTERS; i++) {
+ if (pmu->events[i] == NULL)
+ return i;
+ }
+
+ return -ENOENT;
+}
+
+static void ddr_perf_free_counter(struct ddr_pmu *pmu, int counter)
+{
+ pmu->events[counter] = NULL;
+}
+
+static u32 ddr_perf_read_counter(struct ddr_pmu *pmu, int counter)
+{
+ return readl_relaxed(pmu->base + COUNTER_READ + counter * 4);
+}
+
+static int ddr_perf_event_init(struct perf_event *event)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ struct perf_event *sibling;
+
+ if (event->attr.type != event->pmu->type)
+ return -ENOENT;
+
+ if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+ return -EOPNOTSUPP;
+
+ if (event->cpu < 0) {
+ dev_warn(pmu->dev, "Can't provide per-task data!\n");
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * We must NOT create groups containing mixed PMUs, although software
+ * events are acceptable (for example to create a CCN group
+ * periodically read when a hrtimer aka cpu-clock leader triggers).
+ */
+ if (event->group_leader->pmu != event->pmu &&
+ !is_software_event(event->group_leader))
+ return -EINVAL;
+
+ for_each_sibling_event(sibling, event->group_leader) {
+ if (sibling->pmu != event->pmu &&
+ !is_software_event(sibling))
+ return -EINVAL;
+ }
+
+ event->cpu = pmu->cpu;
+ hwc->idx = -1;
+
+ return 0;
+}
+
+
+static void ddr_perf_event_update(struct perf_event *event)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ u64 delta, prev_raw_count, new_raw_count;
+ int counter = hwc->idx;
+
+ do {
+ prev_raw_count = local64_read(&hwc->prev_count);
+ new_raw_count = ddr_perf_read_counter(pmu, counter);
+ } while (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count);
+
+ delta = (new_raw_count - prev_raw_count) & 0xFFFFFFFF;
+
+ local64_add(delta, &event->count);
+}
+
+static void ddr_perf_counter_enable(struct ddr_pmu *pmu, int config,
+ int counter, bool enable)
+{
+ u8 reg = counter * 4 + COUNTER_CNTL;
+ int val;
+
+ if (enable) {
+ /*
+ * must disable first, then enable again
+ * otherwise, cycle counter will not work
+ * if previous state is enabled.
+ */
+ writel(0, pmu->base + reg);
+ val = CNTL_EN | CNTL_CLEAR;
+ val |= FIELD_PREP(CNTL_CSV_MASK, config);
+ writel(val, pmu->base + reg);
+ } else {
+ /* Disable counter */
+ writel(0, pmu->base + reg);
+ }
+}
+
+static void ddr_perf_event_start(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter = hwc->idx;
+
+ local64_set(&hwc->prev_count, 0);
+
+ ddr_perf_counter_enable(pmu, event->attr.config, counter, true);
+
+ hwc->state = 0;
+}
+
+static int ddr_perf_event_add(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter;
+ int cfg = event->attr.config;
+
+ counter = ddr_perf_alloc_counter(pmu, cfg);
+ if (counter < 0) {
+ dev_dbg(pmu->dev, "There are not enough counters\n");
+ return -EOPNOTSUPP;
+ }
+
+ pmu->events[counter] = event;
+ pmu->active_events++;
+ hwc->idx = counter;
+
+ hwc->state |= PERF_HES_STOPPED;
+
+ if (flags & PERF_EF_START)
+ ddr_perf_event_start(event, flags);
+
+ return 0;
+}
+
+static void ddr_perf_event_stop(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter = hwc->idx;
+
+ ddr_perf_counter_enable(pmu, event->attr.config, counter, false);
+ ddr_perf_event_update(event);
+
+ hwc->state |= PERF_HES_STOPPED;
+}
+
+static void ddr_perf_event_del(struct perf_event *event, int flags)
+{
+ struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int counter = hwc->idx;
+
+ ddr_perf_event_stop(event, PERF_EF_UPDATE);
+
+ ddr_perf_free_counter(pmu, counter);
+ pmu->active_events--;
+ hwc->idx = -1;
+}
+
+static void ddr_perf_pmu_enable(struct pmu *pmu)
+{
+ struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
+
+ /* enable cycle counter if cycle is not active event list */
+ if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
+ ddr_perf_counter_enable(ddr_pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ true);
+}
+
+static void ddr_perf_pmu_disable(struct pmu *pmu)
+{
+ struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
+
+ if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
+ ddr_perf_counter_enable(ddr_pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ false);
+}
+
+static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base,
+ struct device *dev)
+{
+ *pmu = (struct ddr_pmu) {
+ .pmu = (struct pmu) {
+ .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+ .task_ctx_nr = perf_invalid_context,
+ .attr_groups = attr_groups,
+ .event_init = ddr_perf_event_init,
+ .add = ddr_perf_event_add,
+ .del = ddr_perf_event_del,
+ .start = ddr_perf_event_start,
+ .stop = ddr_perf_event_stop,
+ .read = ddr_perf_event_update,
+ .pmu_enable = ddr_perf_pmu_enable,
+ .pmu_disable = ddr_perf_pmu_disable,
+ },
+ .base = base,
+ .dev = dev,
+ };
+
+ pmu->id = ida_simple_get(&ddr_ida, 0, 0, GFP_KERNEL);
+ return pmu->id;
+}
+
+static irqreturn_t ddr_perf_irq_handler(int irq, void *p)
+{
+ int i;
+ struct ddr_pmu *pmu = (struct ddr_pmu *) p;
+ struct perf_event *event, *cycle_event = NULL;
+
+ /* all counter will stop if cycle counter disabled */
+ ddr_perf_counter_enable(pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ false);
+ /*
+ * When the cycle counter overflows, all counters are stopped,
+ * and an IRQ is raised. If any other counter overflows, it
+ * continues counting, and no IRQ is raised.
+ *
+ * Cycles occur at least 4 times as often as other events, so we
+ * can update all events on a cycle counter overflow and not
+ * lose events.
+ *
+ */
+ for (i = 0; i < NUM_COUNTERS; i++) {
+
+ if (!pmu->events[i])
+ continue;
+
+ event = pmu->events[i];
+
+ ddr_perf_event_update(event);
+
+ if (event->hw.idx == EVENT_CYCLES_COUNTER)
+ cycle_event = event;
+ }
+
+ ddr_perf_counter_enable(pmu,
+ EVENT_CYCLES_ID,
+ EVENT_CYCLES_COUNTER,
+ true);
+ if (cycle_event)
+ ddr_perf_event_update(cycle_event);
+
+ return IRQ_HANDLED;
+}
+
+static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+ struct ddr_pmu *pmu = hlist_entry_safe(node, struct ddr_pmu, node);
+ int target;
+
+ if (cpu != pmu->cpu)
+ return 0;
+
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target >= nr_cpu_ids)
+ return 0;
+
+ perf_pmu_migrate_context(&pmu->pmu, cpu, target);
+ pmu->cpu = target;
+
+ WARN_ON(irq_set_affinity_hint(pmu->irq, cpumask_of(pmu->cpu)));
+
+ return 0;
+}
+
+static int ddr_perf_probe(struct platform_device *pdev)
+{
+ struct ddr_pmu *pmu;
+ struct device_node *np;
+ void __iomem *base;
+ char *name;
+ int num;
+ int ret;
+ int irq;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ np = pdev->dev.of_node;
+
+ pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
+ if (!pmu)
+ return -ENOMEM;
+
+ num = ddr_perf_init(pmu, base, &pdev->dev);
+
+ platform_set_drvdata(pdev, pmu);
+
+ name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME "%d",
+ num);
+ if (!name)
+ return -ENOMEM;
+
+ pmu->cpu = raw_smp_processor_id();
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+ DDR_CPUHP_CB_NAME,
+ NULL,
+ ddr_perf_offline_cpu);
+
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cpuhp_setup_state_multi failed\n");
+ goto ddr_perf_err;
+ }
+
+ pmu->cpuhp_state = ret;
+
+ /* Register the pmu instance for cpu hotplug */
+ cpuhp_state_add_instance_nocalls(pmu->cpuhp_state, &pmu->node);
+
+ /* Request irq */
+ irq = of_irq_get(np, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Failed to get irq: %d", irq);
+ ret = irq;
+ goto ddr_perf_err;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq,
+ ddr_perf_irq_handler,
+ IRQF_NOBALANCING | IRQF_NO_THREAD,
+ DDR_CPUHP_CB_NAME,
+ pmu);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Request irq failed: %d", ret);
+ goto ddr_perf_err;
+ }
+
+ pmu->irq = irq;
+ ret = irq_set_affinity_hint(pmu->irq, cpumask_of(pmu->cpu));
+ if (ret) {
+ dev_err(pmu->dev, "Failed to set interrupt affinity!\n");
+ goto ddr_perf_err;
+ }
+
+ ret = perf_pmu_register(&pmu->pmu, name, -1);
+ if (ret)
+ goto ddr_perf_err;
+
+ return 0;
+
+ddr_perf_err:
+ if (pmu->cpuhp_state)
+ cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
+
+ ida_simple_remove(&ddr_ida, pmu->id);
+ dev_warn(&pdev->dev, "i.MX8 DDR Perf PMU failed (%d), disabled\n", ret);
+ return ret;
+}
+
+static int ddr_perf_remove(struct platform_device *pdev)
+{
+ struct ddr_pmu *pmu = platform_get_drvdata(pdev);
+
+ cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
+ irq_set_affinity_hint(pmu->irq, NULL);
+
+ perf_pmu_unregister(&pmu->pmu);
+
+ ida_simple_remove(&ddr_ida, pmu->id);
+ return 0;
+}
+
+static struct platform_driver imx_ddr_pmu_driver = {
+ .driver = {
+ .name = "imx-ddr-pmu",
+ .of_match_table = imx_ddr_pmu_dt_ids,
+ },
+ .probe = ddr_perf_probe,
+ .remove = ddr_perf_remove,
+};
+
+module_platform_driver(imx_ddr_pmu_driver);
+MODULE_LICENSE("GPL v2");