Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 203 insertions, 0 deletions

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
new file mode 100644
index 000000000000..6375ebc85020
--- /dev/null
+++ b/drivers/pcmcia/Kconfig
@@ -0,0 +1,203 @@
+#
+# PCMCIA bus subsystem configuration
+#
+# Right now the non-CardBus choices are not supported
+# by the integrated kernel driver.
+#
+
+menu "PCCARD (PCMCIA/CardBus) support"
+
+config PCCARD
+	tristate "PCCard (PCMCIA/CardBus) support"
+	select HOTPLUG
+	---help---
+	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+	  computer.  These are credit-card size devices such as network cards,
+	  modems or hard drives often used with laptops computers.  There are
+	  actually two varieties of these cards: the older 16 bit PCMCIA cards
+	  and the newer 32 bit CardBus cards.
+
+	  To compile this driver as modules, choose M here: the
+	  module will be called pcmcia_core.
+
+if PCCARD
+
+config PCMCIA_DEBUG
+	bool "Enable PCCARD debugging"
+	help
+	  Say Y here to enable PCMCIA subsystem debugging.  You
+	  will need to choose the debugging level either via the
+	  kernel command line, or module options depending whether
+	  you build the PCMCIA as modules.
+
+	  The kernel command line options are:
+	    pcmcia_core.pc_debug=N
+	    ds.pc_debug=N
+	    sa11xx_core.pc_debug=N
+
+	  The module option is called pc_debug=N
+
+	  In all the above examples, N is the debugging verbosity
+	  level.
+
+config PCMCIA
+	tristate "16-bit PCMCIA support"
+	default y
+	---help---
+	   This option enables support for 16-bit PCMCIA cards. Most older
+	   PC-cards are such 16-bit PCMCIA cards, so unless you know you're
+	   only using 32-bit CardBus cards, say Y or M here.
+
+	   To use 16-bit PCMCIA cards, you will need supporting software from 
+	   David Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ 	   for location).  Please also read the PCMCIA-HOWTO, available from
+	   <http://www.tldp.org/docs.html#howto>.
+
+	   To compile this driver as modules, choose M here: the
+	   module will be called pcmcia.
+
+	   If unsure, say Y.
+
+config CARDBUS
+	bool "32-bit CardBus support"	
+	depends on PCI
+	default y
+	---help---
+	  CardBus is a bus mastering architecture for PC-cards, which allows
+	  for 32 bit PC-cards (the original PCMCIA standard specifies only
+	  a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
+
+	  To use 32 bit PC-cards, you also need a CardBus compatible host
+	  bridge. Virtually all modern PCMCIA bridges do this, and most of
+	  them are "yenta-compatible", so say Y or M there, too.
+
+	  If unsure, say Y.
+
+comment "PC-card bridges"
+
+config YENTA
+	tristate "CardBus yenta-compatible bridge support"
+	depends on PCI
+#fixme: remove dependendcy on CARDBUS
+	depends on CARDBUS
+	select PCCARD_NONSTATIC
+	---help---
+	  This option enables support for CardBus host bridges.  Virtually
+	  all modern PCMCIA bridges are CardBus compatible.  A "bridge" is 
+	  the hardware inside your computer that PCMCIA cards are plugged 
+	  into.
+
+	  To compile this driver as modules, choose M here: the
+	  module will be called yenta_socket.
+
+	  If unsure, say Y.
+
+config PD6729
+	tristate "Cirrus PD6729 compatible bridge support"
+	depends on PCMCIA && PCI
+	select PCCARD_NONSTATIC
+	help
+	  This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
+	  device, found in some older laptops and PCMCIA card readers.
+
+config I82092
+	tristate "i82092 compatible bridge support"
+	depends on PCMCIA && PCI
+	select PCCARD_NONSTATIC
+	help
+	  This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
+	  found in some older laptops and more commonly in evaluation boards for the
+	  chip.
+
+config I82365
+	tristate "i82365 compatible bridge support"
+	depends on PCMCIA && ISA
+	select PCCARD_NONSTATIC
+	help
+	  Say Y here to include support for ISA-bus PCMCIA host bridges that
+	  are register compatible with the Intel i82365.  These are found on
+	  older laptops and ISA-bus card readers for desktop systems.  A
+	  "bridge" is the hardware inside your computer that PCMCIA cards are
+	  plugged into. If unsure, say N.
+
+config TCIC
+	tristate "Databook TCIC host bridge support"
+	depends on PCMCIA
+	select PCCARD_NONSTATIC
+	help
+	  Say Y here to include support for the Databook TCIC family of PCMCIA
+	  host bridges. These are only found on a handful of old systems.
+	  "Bridge" is the name used for the hardware inside your computer that
+	  PCMCIA cards are plugged into. If unsure, say N.
+
+config HD64465_PCMCIA
+	tristate "HD64465 host bridge support"
+	depends on HD64465 && PCMCIA
+
+config PCMCIA_AU1X00
+	tristate "Au1x00 pcmcia support"
+	depends on SOC_AU1X00 && PCMCIA
+
+config PCMCIA_SA1100
+	tristate "SA1100 support"
+	depends on ARM && ARCH_SA1100 && PCMCIA
+	help
+	  Say Y here to include support for SA11x0-based PCMCIA or CF
+	  sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
+	  Xscale(R) embedded machines.
+
+	  This driver is also available as a module called sa1100_cs.
+
+config PCMCIA_SA1111
+	tristate "SA1111 support"
+	depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
+	help
+	  Say Y  here to include support for SA1111-based PCMCIA or CF
+	  sockets, found on the Jornada 720, Graphicsmaster and other
+	  StrongARM(R)/Xscale(R) embedded machines.
+
+	  This driver is also available as a module called sa1111_cs.
+
+config PCMCIA_PXA2XX
+	tristate "PXA2xx support"
+	depends on ARM && ARCH_PXA && PCMCIA
+	help
+	  Say Y here to include support for the PXA2xx PCMCIA controller
+
+config PCMCIA_PROBE
+	bool
+	default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
+
+config M32R_PCC
+	bool "M32R PCMCIA I/F"
+	depends on M32R && CHIP_M32700 && PCMCIA
+	help
+	  Say Y here to use the M32R PCMCIA controller.
+
+config M32R_CFC
+	bool "M32R CF I/F Controller"
+	depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT)
+	help
+	  Say Y here to use the M32R CompactFlash controller.
+
+config M32R_CFC_NUM
+	int "M32R CF I/F number"
+	depends on M32R_CFC
+	default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT
+	help
+	  Set the number of M32R CF slots.
+
+config PCMCIA_VRC4171
+	tristate "NEC VRC4171 Card Controllers support"
+	depends on VRC4171 && PCMCIA
+
+config PCMCIA_VRC4173
+	tristate "NEC VRC4173 CARDU support"
+	depends on CPU_VR41XX && PCI && PCMCIA
+
+config PCCARD_NONSTATIC
+	tristate
+
+endif	# PCCARD
+
+endmenu