shpchp: remove DBG_XXX_ROUTINE

This patch removes DBG_ENTER_ROUTINE, DBG_LEAVE_ROUTINE and related
code.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 19 insertions, 136 deletions

diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index b7bede4b7c27..7e9347eea5b1 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -35,38 +35,6 @@
 
 #include "shpchp.h"
 
-#ifdef DEBUG
-#define DBG_K_TRACE_ENTRY      ((unsigned int)0x00000001)	/* On function entry */
-#define DBG_K_TRACE_EXIT       ((unsigned int)0x00000002)	/* On function exit */
-#define DBG_K_INFO             ((unsigned int)0x00000004)	/* Info messages */
-#define DBG_K_ERROR            ((unsigned int)0x00000008)	/* Error messages */
-#define DBG_K_TRACE            (DBG_K_TRACE_ENTRY|DBG_K_TRACE_EXIT)
-#define DBG_K_STANDARD         (DBG_K_INFO|DBG_K_ERROR|DBG_K_TRACE)
-/* Redefine this flagword to set debug level */
-#define DEBUG_LEVEL            DBG_K_STANDARD
-
-#define DEFINE_DBG_BUFFER     char __dbg_str_buf[256];
-
-#define DBG_PRINT( dbg_flags, args... )              \
-	do {                                             \
-	  if ( DEBUG_LEVEL & ( dbg_flags ) )             \
-	  {                                              \
-	    int len;                                     \
-	    len = sprintf( __dbg_str_buf, "%s:%d: %s: ", \
-		  __FILE__, __LINE__, __FUNCTION__ );    \
-	    sprintf( __dbg_str_buf + len, args );        \
-	    printk( KERN_NOTICE "%s\n", __dbg_str_buf ); \
-	  }                                              \
-	} while (0)
-
-#define DBG_ENTER_ROUTINE	DBG_PRINT (DBG_K_TRACE_ENTRY, "%s", "[Entry]");
-#define DBG_LEAVE_ROUTINE	DBG_PRINT (DBG_K_TRACE_EXIT, "%s", "[Exit]");
-#else
-#define DEFINE_DBG_BUFFER
-#define DBG_ENTER_ROUTINE
-#define DBG_LEAVE_ROUTINE
-#endif				/* DEBUG */
-
 /* Slot Available Register I field definition */
 #define SLOT_33MHZ		0x0000001f
 #define SLOT_66MHZ_PCIX		0x00001f00
@@ -211,7 +179,6 @@
 #define SLOT_EVENT_LATCH	0x2
 #define SLOT_SERR_INT_MASK	0x3
 
-DEFINE_DBG_BUFFER		/* Debug string buffer for entire HPC defined here */
 static atomic_t shpchp_num_controllers = ATOMIC_INIT(0);
 
 static irqreturn_t shpc_isr(int irq, void *dev_id);
@@ -268,8 +235,6 @@ static void int_poll_timeout(unsigned long data)
 {
 	struct controller *ctrl = (struct controller *)data;
 
-	DBG_ENTER_ROUTINE
-
 	/* Poll for interrupt events.  regs == NULL => polling */
 	shpc_isr(0, ctrl);
 
@@ -278,8 +243,6 @@ static void int_poll_timeout(unsigned long data)
 		shpchp_poll_time = 2; /* default polling interval is 2 sec */
 
 	start_int_poll_timer(ctrl, shpchp_poll_time);
-
-	DBG_LEAVE_ROUTINE
 }
 
 /*
@@ -353,8 +316,6 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
 	int retval = 0;
 	u16 temp_word;
 
-	DBG_ENTER_ROUTINE 
-
 	mutex_lock(&slot->ctrl->cmd_lock);
 
 	if (!shpc_poll_ctrl_busy(ctrl)) {
@@ -389,19 +350,13 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
 	}
  out:
 	mutex_unlock(&slot->ctrl->cmd_lock);
-
-	DBG_LEAVE_ROUTINE 
 	return retval;
 }
 
 static int hpc_check_cmd_status(struct controller *ctrl)
 {
-	u16 cmd_status;
 	int retval = 0;
-
-	DBG_ENTER_ROUTINE 
-
-	cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
+	u16 cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
 	
 	switch (cmd_status >> 1) {
 	case 0:
@@ -423,7 +378,6 @@ static int hpc_check_cmd_status(struct controller *ctrl)
 		retval = cmd_status;
 	}
 
-	DBG_LEAVE_ROUTINE 
 	return retval;
 }
 
@@ -431,13 +385,8 @@ static int hpc_check_cmd_status(struct controller *ctrl)
 static int hpc_get_attention_status(struct slot *slot, u8 *status)
 {
 	struct controller *ctrl = slot->ctrl;
-	u32 slot_reg;
-	u8 state;
-	
-	DBG_ENTER_ROUTINE 
-
-	slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
-	state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u8 state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT;
 
 	switch (state) {
 	case ATN_LED_STATE_ON:
@@ -454,20 +403,14 @@ static int hpc_get_attention_status(struct slot *slot, u8 *status)
 		break;
 	}
 
-	DBG_LEAVE_ROUTINE 
 	return 0;
 }
 
 static int hpc_get_power_status(struct slot * slot, u8 *status)
 {
 	struct controller *ctrl = slot->ctrl;
-	u32 slot_reg;
-	u8 state;
-	
-	DBG_ENTER_ROUTINE 
-
-	slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
-	state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u8 state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT;
 
 	switch (state) {
 	case SLOT_STATE_PWRONLY:
@@ -484,7 +427,6 @@ static int hpc_get_power_status(struct slot * slot, u8 *status)
 		break;
 	}
 
-	DBG_LEAVE_ROUTINE 
 	return 0;
 }
 
@@ -492,30 +434,21 @@ static int hpc_get_power_status(struct slot * slot, u8 *status)
 static int hpc_get_latch_status(struct slot *slot, u8 *status)
 {
 	struct controller *ctrl = slot->ctrl;
-	u32 slot_reg;
-
-	DBG_ENTER_ROUTINE 
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
 
-	slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
 	*status = !!(slot_reg & MRL_SENSOR);	/* 0 -> close; 1 -> open */
 
-	DBG_LEAVE_ROUTINE 
 	return 0;
 }
 
 static int hpc_get_adapter_status(struct slot *slot, u8 *status)
 {
 	struct controller *ctrl = slot->ctrl;
-	u32 slot_reg;
-	u8 state;
-
-	DBG_ENTER_ROUTINE 
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u8 state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT;
 
-	slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
-	state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT;
 	*status = (state != 0x3) ? 1 : 0;
 
-	DBG_LEAVE_ROUTINE 
 	return 0;
 }
 
@@ -523,11 +456,8 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
 {
 	struct controller *ctrl = slot->ctrl;
 
-	DBG_ENTER_ROUTINE 
-
 	*prog_int = shpc_readb(ctrl, PROG_INTERFACE);
 
-	DBG_LEAVE_ROUTINE 
 	return 0;
 }
 
@@ -539,8 +469,6 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
 	u8 m66_cap  = !!(slot_reg & MHZ66_CAP);
 	u8 pi, pcix_cap;
 
-	DBG_ENTER_ROUTINE 
-
 	if ((retval = hpc_get_prog_int(slot, &pi)))
 		return retval;
 
@@ -582,21 +510,15 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
 	}
 
 	dbg("Adapter speed = %d\n", *value);
-	DBG_LEAVE_ROUTINE 
 	return retval;
 }
 
 static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
 {
-	struct controller *ctrl = slot->ctrl;
-	u16 sec_bus_status;
-	u8 pi;
 	int retval = 0;
-
-	DBG_ENTER_ROUTINE 
-
-	pi = shpc_readb(ctrl, PROG_INTERFACE);
-	sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG);
+	struct controller *ctrl = slot->ctrl;
+	u16 sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG);
+	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
 
 	if (pi == 2) {
 		*mode = (sec_bus_status & 0x0100) >> 8;
@@ -605,21 +527,14 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
 	}
 
 	dbg("Mode 1 ECC cap = %d\n", *mode);
-	
-	DBG_LEAVE_ROUTINE 
 	return retval;
 }
 
 static int hpc_query_power_fault(struct slot * slot)
 {
 	struct controller *ctrl = slot->ctrl;
-	u32 slot_reg;
-
-	DBG_ENTER_ROUTINE 
-
-	slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
 
-	DBG_LEAVE_ROUTINE
 	/* Note: Logic 0 => fault */
 	return !(slot_reg & POWER_FAULT);
 }
@@ -666,8 +581,6 @@ static void hpc_release_ctlr(struct controller *ctrl)
 	int i;
 	u32 slot_reg, serr_int;
 
-	DBG_ENTER_ROUTINE 
-
 	/*
 	 * Mask event interrupts and SERRs of all slots
 	 */
@@ -708,61 +621,43 @@ static void hpc_release_ctlr(struct controller *ctrl)
 	 */
 	if (atomic_dec_and_test(&shpchp_num_controllers))
 		destroy_workqueue(shpchp_wq);
-
-	DBG_LEAVE_ROUTINE
 }
 
 static int hpc_power_on_slot(struct slot * slot)
 {
 	int retval;
 
-	DBG_ENTER_ROUTINE 
-
 	retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
-	if (retval) {
+	if (retval)
 		err("%s: Write command failed!\n", __FUNCTION__);
-		return retval;
-	}
-
-	DBG_LEAVE_ROUTINE
 
-	return 0;
+	return retval;
 }
 
 static int hpc_slot_enable(struct slot * slot)
 {
 	int retval;
 
-	DBG_ENTER_ROUTINE 
-
 	/* Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
 	retval = shpc_write_cmd(slot, slot->hp_slot,
 			SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
-	if (retval) {
+	if (retval)
 		err("%s: Write command failed!\n", __FUNCTION__);
-		return retval;
-	}
 
-	DBG_LEAVE_ROUTINE
-	return 0;
+	return retval;
 }
 
 static int hpc_slot_disable(struct slot * slot)
 {
 	int retval;
 
-	DBG_ENTER_ROUTINE 
-
 	/* Slot - Disable, Power Indicator - Off, Attention Indicator - On */
 	retval = shpc_write_cmd(slot, slot->hp_slot,
 			SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
-	if (retval) {
+	if (retval)
 		err("%s: Write command failed!\n", __FUNCTION__);
-		return retval;
-	}
 
-	DBG_LEAVE_ROUTINE
-	return 0;
+	return retval;
 }
 
 static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
@@ -771,8 +666,6 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 	struct controller *ctrl = slot->ctrl;
 	u8 pi, cmd;
 
-	DBG_ENTER_ROUTINE 
-
 	pi = shpc_readb(ctrl, PROG_INTERFACE);
 	if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX))
 		return -EINVAL;
@@ -828,7 +721,6 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 	if (retval)
 		err("%s: Write command failed!\n", __FUNCTION__);
 
-	DBG_LEAVE_ROUTINE
 	return retval;
 }
 
@@ -920,8 +812,6 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 	u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
 	u32 slot_avail2 = shpc_readl(ctrl, SLOT_AVAIL2);
 
-	DBG_ENTER_ROUTINE 
-
 	if (pi == 2) {
 		if (slot_avail2 & SLOT_133MHZ_PCIX_533)
 			bus_speed = PCI_SPEED_133MHz_PCIX_533;
@@ -954,7 +844,7 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 
 	*value = bus_speed;
 	dbg("Max bus speed = %d\n", bus_speed);
-	DBG_LEAVE_ROUTINE 
+
 	return retval;
 }
 
@@ -967,8 +857,6 @@ static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
 	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
 
-	DBG_ENTER_ROUTINE 
-
 	if ((pi == 1) && (speed_mode > 4)) {
 		*value = PCI_SPEED_UNKNOWN;
 		return -ENODEV;
@@ -1024,7 +912,6 @@ static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 	}
 
 	dbg("Current bus speed = %d\n", bus_speed);
-	DBG_LEAVE_ROUTINE 
 	return retval;
 }
 
@@ -1061,8 +948,6 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 	u32 tempdword, slot_reg, slot_config;
 	u8 i;
 
-	DBG_ENTER_ROUTINE
-
 	ctrl->pci_dev = pdev;  /* pci_dev of the P2P bridge */
 
 	if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
@@ -1235,13 +1120,11 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 		dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
 	}
 
-	DBG_LEAVE_ROUTINE
 	return 0;
 
 	/* We end up here for the many possible ways to fail this API.  */
 abort_iounmap:
 	iounmap(ctrl->creg);
 abort:
-	DBG_LEAVE_ROUTINE
 	return rc;
 }