Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull misc x86 fixes from Ingo Molnar:
 - topology enumeration fixes
 - KASAN fix
 - two entry fixes (not yet the big series related to KASLR)
 - remove obsolete code
 - instruction decoder fix
 - better /dev/mem sanity checks, hopefully working better this time
 - pkeys fixes
 - two ACPI fixes
 - 5-level paging related fixes
 - UMIP fixes that should make application visible faults more debuggable
 - boot fix for weird virtualization environment

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/decoder: Add new TEST instruction pattern
  x86/PCI: Remove unused HyperTransport interrupt support
  x86/umip: Fix insn_get_code_seg_params()'s return value
  x86/boot/KASLR: Remove unused variable
  x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
  x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
  x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing
  x86/pkeys/selftests: Fix protection keys write() warning
  x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
  x86/mpx/selftests: Fix up weird arrays
  x86/pkeys: Update documentation about availability
  x86/umip: Print a warning into the syslog if UMIP-protected instructions are used
  x86/smpboot: Fix __max_logical_packages estimate
  x86/topology: Avoid wasting 128k for package id array
  perf/x86/intel/uncore: Cache logical pkg id in uncore driver
  x86/acpi: Reduce code duplication in mp_override_legacy_irq()
  x86/acpi: Handle SCI interrupts above legacy space gracefully
  x86/boot: Fix boot failure when SMP MP-table is based at 0
  x86/mm: Limit mmap() of /dev/mem to valid physical addresses
  x86/selftests: Add test for mapping placement for 5-level paging
  ...

3 files changed, 0 insertions, 147 deletions

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 90944667ccea..bda151788f3f 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -80,15 +80,6 @@ config XEN_PCIDEV_FRONTEND
           The PCI device frontend driver allows the kernel to import arbitrary
           PCI devices from a PCI backend to support PCI driver domains.
 
-config HT_IRQ
-	bool "Interrupts on hypertransport devices"
-	default y
-	depends on PCI && X86_LOCAL_APIC
-	help
-	   This allows native hypertransport devices to use interrupts.
-
-	   If unsure say Y.
-
 config PCI_ATS
 	bool
 
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 3d5e047f0a32..c7819b973df7 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -21,9 +21,6 @@ obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
 # Build the PCI MSI interrupt support
 obj-$(CONFIG_PCI_MSI) += msi.o
 
-# Build the Hypertransport interrupt support
-obj-$(CONFIG_HT_IRQ) += htirq.o
-
 obj-$(CONFIG_PCI_ATS) += ats.o
 obj-$(CONFIG_PCI_IOV) += iov.o
 
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
deleted file mode 100644
index bb88c26f5144..000000000000
--- a/drivers/pci/htirq.c
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * File:	htirq.c
- * Purpose:	Hypertransport Interrupt Capability
- *
- * Copyright (C) 2006 Linux Networx
- * Copyright (C) Eric Biederman <ebiederman@lnxi.com>
- */
-
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-#include <linux/slab.h>
-#include <linux/htirq.h>
-
-/* Global ht irq lock.
- *
- * This is needed to serialize access to the data port in hypertransport
- * irq capability.
- *
- * With multiple simultaneous hypertransport irq devices it might pay
- * to make this more fine grained.  But start with simple, stupid, and correct.
- */
-static DEFINE_SPINLOCK(ht_irq_lock);
-
-void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
-{
-	struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
-	unsigned long flags;
-
-	spin_lock_irqsave(&ht_irq_lock, flags);
-	if (cfg->msg.address_lo != msg->address_lo) {
-		pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
-		pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo);
-	}
-	if (cfg->msg.address_hi != msg->address_hi) {
-		pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
-		pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi);
-	}
-	if (cfg->update)
-		cfg->update(cfg->dev, irq, msg);
-	spin_unlock_irqrestore(&ht_irq_lock, flags);
-	cfg->msg = *msg;
-}
-
-void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg)
-{
-	struct ht_irq_cfg *cfg = irq_get_handler_data(irq);
-
-	*msg = cfg->msg;
-}
-
-void mask_ht_irq(struct irq_data *data)
-{
-	struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data);
-	struct ht_irq_msg msg = cfg->msg;
-
-	msg.address_lo |= 1;
-	write_ht_irq_msg(data->irq, &msg);
-}
-
-void unmask_ht_irq(struct irq_data *data)
-{
-	struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data);
-	struct ht_irq_msg msg = cfg->msg;
-
-	msg.address_lo &= ~1;
-	write_ht_irq_msg(data->irq, &msg);
-}
-
-/**
- * __ht_create_irq - create an irq and attach it to a device.
- * @dev: The hypertransport device to find the irq capability on.
- * @idx: Which of the possible irqs to attach to.
- * @update: Function to be called when changing the htirq message
- *
- * The irq number of the new irq or a negative error value is returned.
- */
-int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
-{
-	int max_irq, pos, irq;
-	unsigned long flags;
-	u32 data;
-
-	pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
-	if (!pos)
-		return -EINVAL;
-
-	/* Verify the idx I want to use is in range */
-	spin_lock_irqsave(&ht_irq_lock, flags);
-	pci_write_config_byte(dev, pos + 2, 1);
-	pci_read_config_dword(dev, pos + 4, &data);
-	spin_unlock_irqrestore(&ht_irq_lock, flags);
-
-	max_irq = (data >> 16) & 0xff;
-	if (idx > max_irq)
-		return -EINVAL;
-
-	irq = arch_setup_ht_irq(idx, pos, dev, update);
-	if (irq > 0)
-		dev_dbg(&dev->dev, "irq %d for HT\n", irq);
-
-	return irq;
-}
-EXPORT_SYMBOL(__ht_create_irq);
-
-/**
- * ht_create_irq - create an irq and attach it to a device.
- * @dev: The hypertransport device to find the irq capability on.
- * @idx: Which of the possible irqs to attach to.
- *
- * ht_create_irq needs to be called for all hypertransport devices
- * that generate irqs.
- *
- * The irq number of the new irq or a negative error value is returned.
- */
-int ht_create_irq(struct pci_dev *dev, int idx)
-{
-	return __ht_create_irq(dev, idx, NULL);
-}
-EXPORT_SYMBOL(ht_create_irq);
-
-/**
- * ht_destroy_irq - destroy an irq created with ht_create_irq
- * @irq: irq to be destroyed
- *
- * This reverses ht_create_irq removing the specified irq from
- * existence.  The irq should be free before this happens.
- */
-void ht_destroy_irq(unsigned int irq)
-{
-	arch_teardown_ht_irq(irq);
-}
-EXPORT_SYMBOL(ht_destroy_irq);