Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Three trivial overlapping conflicts.

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 32 insertions, 4 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7c1b362f599a..766f5779db92 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -6262,8 +6262,7 @@ static int __init pci_setup(char *str)
 			} else if (!strncmp(str, "pcie_scan_all", 13)) {
 				pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
 			} else if (!strncmp(str, "disable_acs_redir=", 18)) {
-				disable_acs_redir_param =
-					kstrdup(str + 18, GFP_KERNEL);
+				disable_acs_redir_param = str + 18;
 			} else {
 				printk(KERN_ERR "PCI: Unknown option `%s'\n",
 						str);
@@ -6274,3 +6273,19 @@ static int __init pci_setup(char *str)
 	return 0;
 }
 early_param("pci", pci_setup);
+
+/*
+ * 'disable_acs_redir_param' is initialized in pci_setup(), above, to point
+ * to data in the __initdata section which will be freed after the init
+ * sequence is complete. We can't allocate memory in pci_setup() because some
+ * architectures do not have any memory allocation service available during
+ * an early_param() call. So we allocate memory and copy the variable here
+ * before the init section is freed.
+ */
+static int __init pci_realloc_setup_params(void)
+{
+	disable_acs_redir_param = kstrdup(disable_acs_redir_param, GFP_KERNEL);
+
+	return 0;
+}
+pure_initcall(pci_realloc_setup_params);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 5cbdbca904ac..362eb8cfa53b 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -142,3 +142,11 @@ config PCIE_PTM
 
 	  This is only useful if you have devices that support PTM, but it
 	  is safe to enable even if you don't.
+
+config PCIE_BW
+	bool "PCI Express Bandwidth Change Notification"
+	depends on PCIEPORTBUS
+	help
+	  This enables PCI Express Bandwidth Change Notification.  If
+	  you know link width or rate changes occur only to correct
+	  unreliable links, you may answer Y.
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index f1d7bc1e5efa..efb9d2e71e9e 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -3,7 +3,6 @@
 # Makefile for PCI Express features and port driver
 
 pcieportdrv-y			:= portdrv_core.o portdrv_pci.o err.o
-pcieportdrv-y			+= bw_notification.o
 
 obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
 
@@ -13,3 +12,4 @@ obj-$(CONFIG_PCIEAER_INJECT)	+= aer_inject.o
 obj-$(CONFIG_PCIE_PME)		+= pme.o
 obj-$(CONFIG_PCIE_DPC)		+= dpc.o
 obj-$(CONFIG_PCIE_PTM)		+= ptm.o
+obj-$(CONFIG_PCIE_BW)		+= bw_notification.o
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 1d50dc58ac40..944827a8c7d3 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -49,7 +49,11 @@ int pcie_dpc_init(void);
 static inline int pcie_dpc_init(void) { return 0; }
 #endif
 
+#ifdef CONFIG_PCIE_BW
 int pcie_bandwidth_notification_init(void);
+#else
+static inline int pcie_bandwidth_notification_init(void) { return 0; }
+#endif
 
 /* Port Type */
 #define PCIE_ANY_PORT			(~0)
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 7d04f9d087a6..1b330129089f 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -55,7 +55,8 @@ static int pcie_message_numbers(struct pci_dev *dev, int mask,
 	 * 7.8.2, 7.10.10, 7.31.2.
 	 */
 
-	if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
+	if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP |
+		    PCIE_PORT_SERVICE_BWNOTIF)) {
 		pcie_capability_read_word(dev, PCI_EXP_FLAGS, &reg16);
 		*pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9;
 		nvec = *pme + 1;