Backmerge tag 'v4.16-rc7' into drm-next

Linux 4.16-rc7

This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.

3 files changed, 30 insertions, 17 deletions

diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c
index 8de2d5c69b1d..dc9303abda42 100644
--- a/drivers/pci/dwc/pcie-designware-host.c
+++ b/drivers/pci/dwc/pcie-designware-host.c
@@ -613,7 +613,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	/* setup bus numbers */
 	val = dw_pcie_readl_dbi(pci, PCI_PRIMARY_BUS);
 	val &= 0xff000000;
-	val |= 0x00010100;
+	val |= 0x00ff0100;
 	dw_pcie_writel_dbi(pci, PCI_PRIMARY_BUS, val);
 
 	/* setup command register */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ec582d37c189..c3ba14f6444e 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3420,22 +3420,29 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE,
 
 static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
 {
-	pci_set_vpd_size(dev, 8192);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x20, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x21, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x22, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x23, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x24, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x25, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x26, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x30, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x31, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x32, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x35, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x36, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x37, quirk_chelsio_extend_vpd);
+	int chip = (dev->device & 0xf000) >> 12;
+	int func = (dev->device & 0x0f00) >>  8;
+	int prod = (dev->device & 0x00ff) >>  0;
+
+	/*
+	 * If this is a T3-based adapter, there's a 1KB VPD area at offset
+	 * 0xc00 which contains the preferred VPD values.  If this is a T4 or
+	 * later based adapter, the special VPD is at offset 0x400 for the
+	 * Physical Functions (the SR-IOV Virtual Functions have no VPD
+	 * Capabilities).  The PCI VPD Access core routines will normally
+	 * compute the size of the VPD by parsing the VPD Data Structure at
+	 * offset 0x000.  This will result in silent failures when attempting
+	 * to accesses these other VPD areas which are beyond those computed
+	 * limits.
+	 */
+	if (chip == 0x0 && prod >= 0x20)
+		pci_set_vpd_size(dev, 8192);
+	else if (chip >= 0x4 && func < 0x8)
+		pci_set_vpd_size(dev, 2048);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+			quirk_chelsio_extend_vpd);
 
 #ifdef CONFIG_ACPI
 /*
@@ -3902,6 +3909,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230,
 			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642,
 			 quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0645,
+			 quirk_dma_func1_alias);
 /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON,
 			 PCI_DEVICE_ID_JMICRON_JMB388_ESD,
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 369d48d6c6f1..365447240d95 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -401,6 +401,10 @@ void pci_release_resource(struct pci_dev *dev, int resno)
 	struct resource *res = dev->resource + resno;
 
 	pci_info(dev, "BAR %d: releasing %pR\n", resno, res);
+
+	if (!res->parent)
+		return;
+
 	release_resource(res);
 	res->end = resource_size(res) - 1;
 	res->start = 0;