diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-10-28 14:20:44 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-10-28 14:20:44 -0700 |
commit | 0e59e7e7feb5a12938fbf9135147eeda3238c6c4 (patch) | |
tree | dbe994369ca9cad6893f0fd710f75791bc84b816 /drivers/pci/quirks.c | |
parent | 46b51ea2099fa2082342e52b8284aa828429b80b (diff) | |
parent | a513a99a7cebfb452839cc09c9c0586f72d96414 (diff) | |
download | linux-0e59e7e7feb5a12938fbf9135147eeda3238c6c4.tar.bz2 |
Merge branch 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
* 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
PCI: Clean-up MPS debug output
pci: Clamp pcie_set_readrq() when using "performance" settings
PCI: enable MPS "performance" setting to properly handle bridge MPS
PCI: Workaround for Intel MPS errata
PCI: Add support for PASID capability
PCI: Add implementation for PRI capability
PCI: Export ATS functions to modules
PCI: Move ATS implementation into own file
PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake()
PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove
PCI / PM: Extend PME polling to all PCI devices
PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
PCI: Make pci_setup_bridge() non-static for use by arch code
x86: constify PCI raw ops structures
PCI: Add quirk for known incorrect MPSS
PCI: Add Solarflare vendor ID and SFC4000 device IDs
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r-- | drivers/pci/quirks.c | 111 |
1 files changed, 97 insertions, 14 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b23856aaf6eb..7285145ac1c9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) /* disable must be done via function #0 */ if (PCI_FUNC(dev->devfn)) return; - - pci_read_config_byte(dev, 0xCB, &disable); - - if (disable & 0x02) - return; - - pci_read_config_byte(dev, 0xCA, &write_enable); - pci_write_config_byte(dev, 0xCA, 0x57); - pci_write_config_byte(dev, 0xCB, disable | 0x02); - pci_write_config_byte(dev, 0xCA, write_enable); - - dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); - dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); - /* * RICOH 0xe823 SD/MMC card reader fails to recognize * certain types of SD/MMC cards. Lowering the SD base @@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); } + + pci_read_config_byte(dev, 0xCB, &disable); + + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0xCA, &write_enable); + pci_write_config_byte(dev, 0xCA, 0x57); + pci_write_config_byte(dev, 0xCB, disable | 0x02); + pci_write_config_byte(dev, 0xCA, write_enable); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); + } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); @@ -2822,6 +2822,89 @@ static void __devinit fixup_ti816x_class(struct pci_dev* dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class); +/* Some PCIe devices do not work reliably with the claimed maximum + * payload size supported. + */ +static void __devinit fixup_mpss_256(struct pci_dev *dev) +{ + dev->pcie_mpss = 1; /* 256 bytes */ +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); + +/* Intel 5000 and 5100 Memory controllers have an errata with read completion + * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. + * Since there is no way of knowing what the PCIE MPS on each fabric will be + * until all of the devices are discovered and buses walked, read completion + * coalescing must be disabled. Unfortunately, it cannot be re-enabled because + * it is possible to hotplug a device with MPS of 256B. + */ +static void __devinit quirk_intel_mc_errata(struct pci_dev *dev) +{ + int err; + u16 rcc; + + if (pcie_bus_config == PCIE_BUS_TUNE_OFF) + return; + + /* Intel errata specifies bits to change but does not say what they are. + * Keeping them magical until such time as the registers and values can + * be explained. + */ + err = pci_read_config_word(dev, 0x48, &rcc); + if (err) { + dev_err(&dev->dev, "Error attempting to read the read " + "completion coalescing register.\n"); + return; + } + + if (!(rcc & (1 << 10))) + return; + + rcc &= ~(1 << 10); + + err = pci_write_config_word(dev, 0x48, rcc); + if (err) { + dev_err(&dev->dev, "Error attempting to write the read " + "completion coalescing register.\n"); + return; + } + + pr_info_once("Read completion coalescing disabled due to hardware " + "errata relating to 256B MPS.\n"); +} +/* Intel 5000 series memory controllers and ports 2-7 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); +/* Intel 5100 series memory controllers and ports 2-7 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { |