[PATCH] genirq: msi: refactor the msi_ops

The current msi_ops are short sighted in a number of ways, this patch attempts
to fix the glaring deficiences.

- Report in msi_ops if a 64bit address is needed in the msi message, so we
  can fail 32bit only msi structures.

- Send and receive a full struct msi_msg in both setup and target.  This is
  a little cleaner and allows for architectures that need to modify the data
  to retarget the msi interrupt to a different cpu.

- In target pass in the full cpu mask instead of just the first cpu in case
  we can make use of the full cpu mask.

- Operate in terms of irqs and not vectors, currently there is still a 1-1
  relationship but on architectures other than ia64 I expect this will change.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 62 deletions

diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 62f61b61d2c9..3519eca50d8a 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,68 +6,6 @@
 #ifndef MSI_H
 #define MSI_H
 
-/*
- * MSI operation vector.  Used by the msi core code (drivers/pci/msi.c)
- * to abstract platform-specific tasks relating to MSI address generation
- * and resource management.
- */
-struct msi_ops {
-	/**
-	 * setup - generate an MSI bus address and data for a given vector
-	 * @pdev: PCI device context (in)
-	 * @vector: vector allocated by the msi core (in)
-	 * @addr_hi: upper 32 bits of PCI bus MSI address (out)
-	 * @addr_lo: lower 32 bits of PCI bus MSI address (out)
-	 * @data: MSI data payload (out)
-	 *
-	 * Description: The setup op is used to generate a PCI bus addres and
-	 * data which the msi core will program into the card MSI capability
-	 * registers.  The setup routine is responsible for picking an initial
-	 * cpu to target the MSI at.  The setup routine is responsible for
-	 * examining pdev to determine the MSI capabilities of the card and
-	 * generating a suitable address/data.  The setup routine is
-	 * responsible for allocating and tracking any system resources it
-	 * needs to route the MSI to the cpu it picks, and for associating
-	 * those resources with the passed in vector.
-	 *
-	 * Returns 0 if the MSI address/data was successfully setup.
-	 **/
-
-	int	(*setup)    (struct pci_dev *pdev, unsigned int vector,
-			     u32 *addr_hi, u32 *addr_lo, u32 *data);
-
-	/**
-	 * teardown - release resources allocated by setup
-	 * @vector: vector context for resources (in)
-	 *
-	 * Description:  The teardown op is used to release any resources
-	 * that were allocated in the setup routine associated with the passed
-	 * in vector.
-	 **/
-
-	void	(*teardown) (unsigned int vector);
-
-	/**
-	 * target - retarget an MSI at a different cpu
-	 * @vector: vector context for resources (in)
-	 * @cpu:  new cpu to direct vector at (in)
-	 * @addr_hi: new value of PCI bus upper 32 bits (in/out)
-	 * @addr_lo: new value of PCI bus lower 32 bits (in/out)
-	 *
-	 * Description:  The target op is used to redirect an MSI vector
-	 * at a different cpu.  addr_hi/addr_lo coming in are the existing
-	 * values that the MSI core has programmed into the card.  The
-	 * target code is responsible for freeing any resources (if any)
-	 * associated with the old address, and generating a new PCI bus
-	 * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
-	 **/
-
-	void	(*target)   (unsigned int vector, unsigned int cpu,
-			     u32 *addr_hi, u32 *addr_lo);
-};
-
-extern int msi_register(struct msi_ops *ops);
-
 #include <asm/msi.h>
 
 /*