diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-22 12:41:00 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-22 12:41:00 -0700 |
| commit | 00937f36b09e89c74e4a059dbb8acbf4b971d5eb (patch) | |
| tree | ff2e5f5fa6736460437f57680405a20124d1e969 /drivers/pci/controller/pci-aardvark.c | |
| parent | 96485e4462604744d66bf4301557d996d80b85eb (diff) | |
| parent | 28e34e751f6c50098d9bcecb30c97634b6126730 (diff) | |
| download | linux-00937f36b09e89c74e4a059dbb8acbf4b971d5eb.tar.bz2 | |
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
Diffstat (limited to 'drivers/pci/controller/pci-aardvark.c')
| -rw-r--r-- | drivers/pci/controller/pci-aardvark.c | 108 |
1 files changed, 69 insertions, 39 deletions
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 1559f79e63b6..0be485a25327 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -9,11 +9,12 @@ */ #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/phy/phy.h> @@ -251,6 +252,25 @@ static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie) } } +static void advk_pcie_issue_perst(struct advk_pcie *pcie) +{ + u32 reg; + + if (!pcie->reset_gpio) + return; + + /* PERST does not work for some cards when link training is enabled */ + reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); + reg &= ~LINK_TRAINING_EN; + advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); + + /* 10ms delay is needed for some cards */ + dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n"); + gpiod_set_value_cansleep(pcie->reset_gpio, 1); + usleep_range(10000, 11000); + gpiod_set_value_cansleep(pcie->reset_gpio, 0); +} + static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen) { int ret, neg_gen; @@ -299,6 +319,21 @@ static void advk_pcie_train_link(struct advk_pcie *pcie) int neg_gen = -1, gen; /* + * Reset PCIe card via PERST# signal. Some cards are not detected + * during link training when they are in some non-initial state. + */ + advk_pcie_issue_perst(pcie); + + /* + * PERST# signal could have been asserted by pinctrl subsystem before + * probe() callback has been called or issued explicitly by reset gpio + * function advk_pcie_issue_perst(), making the endpoint going into + * fundamental reset. As required by PCI Express spec a delay for at + * least 100ms after such a reset before link training is needed. + */ + msleep(PCI_PM_D3COLD_WAIT); + + /* * Try link training at link gen specified by device tree property * 'max-link-speed'. If this fails, iteratively train at lower gen. */ @@ -330,31 +365,10 @@ err: dev_err(dev, "link never came up\n"); } -static void advk_pcie_issue_perst(struct advk_pcie *pcie) -{ - u32 reg; - - if (!pcie->reset_gpio) - return; - - /* PERST does not work for some cards when link training is enabled */ - reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); - reg &= ~LINK_TRAINING_EN; - advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); - - /* 10ms delay is needed for some cards */ - dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n"); - gpiod_set_value_cansleep(pcie->reset_gpio, 1); - usleep_range(10000, 11000); - gpiod_set_value_cansleep(pcie->reset_gpio, 0); -} - static void advk_pcie_setup_hw(struct advk_pcie *pcie) { u32 reg; - advk_pcie_issue_perst(pcie); - /* Enable TX */ reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG); reg |= PCIE_CORE_REF_CLK_TX_ENABLE; @@ -431,15 +445,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie) reg |= PIO_CTRL_ADDR_WIN_DISABLE; advk_writel(pcie, reg, PIO_CTRL); - /* - * PERST# signal could have been asserted by pinctrl subsystem before - * probe() callback has been called or issued explicitly by reset gpio - * function advk_pcie_issue_perst(), making the endpoint going into - * fundamental reset. As required by PCI Express spec a delay for at - * least 100ms after such a reset before link training is needed. - */ - msleep(PCI_PM_D3COLD_WAIT); - advk_pcie_train_link(pcie); /* @@ -607,7 +612,7 @@ static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = { * Initialize the configuration space of the PCI-to-PCI bridge * associated with the given PCIe interface. */ -static void advk_sw_pci_bridge_init(struct advk_pcie *pcie) +static int advk_sw_pci_bridge_init(struct advk_pcie *pcie) { struct pci_bridge_emul *bridge = &pcie->bridge; @@ -633,8 +638,7 @@ static void advk_sw_pci_bridge_init(struct advk_pcie *pcie) bridge->data = pcie; bridge->ops = &advk_pci_bridge_emul_ops; - pci_bridge_emul_init(bridge, 0); - + return pci_bridge_emul_init(bridge, 0); } static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus, @@ -1077,7 +1081,9 @@ static int advk_pcie_enable_phy(struct advk_pcie *pcie) } ret = phy_power_on(pcie->phy); - if (ret) { + if (ret == -EOPNOTSUPP) { + dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n"); + } else if (ret) { phy_exit(pcie->phy); return ret; } @@ -1122,6 +1128,7 @@ static int advk_pcie_probe(struct platform_device *pdev) pcie = pci_host_bridge_priv(bridge); pcie->pdev = pdev; + platform_set_drvdata(pdev, pcie); pcie->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(pcie->base)) @@ -1167,7 +1174,11 @@ static int advk_pcie_probe(struct platform_device *pdev) advk_pcie_setup_hw(pcie); - advk_sw_pci_bridge_init(pcie); + ret = advk_sw_pci_bridge_init(pcie); + if (ret) { + dev_err(dev, "Failed to register emulated root PCI bridge\n"); + return ret; + } ret = advk_pcie_init_irq_domain(pcie); if (ret) { @@ -1195,18 +1206,37 @@ static int advk_pcie_probe(struct platform_device *pdev) return 0; } +static int advk_pcie_remove(struct platform_device *pdev) +{ + struct advk_pcie *pcie = platform_get_drvdata(pdev); + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); + + pci_lock_rescan_remove(); + pci_stop_root_bus(bridge->bus); + pci_remove_root_bus(bridge->bus); + pci_unlock_rescan_remove(); + + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); + + return 0; +} + static const struct of_device_id advk_pcie_of_match_table[] = { { .compatible = "marvell,armada-3700-pcie", }, {}, }; +MODULE_DEVICE_TABLE(of, advk_pcie_of_match_table); static struct platform_driver advk_pcie_driver = { .driver = { .name = "advk-pcie", .of_match_table = advk_pcie_of_match_table, - /* Driver unloading/unbinding currently not supported */ - .suppress_bind_attrs = true, }, .probe = advk_pcie_probe, + .remove = advk_pcie_remove, }; -builtin_platform_driver(advk_pcie_driver); +module_platform_driver(advk_pcie_driver); + +MODULE_DESCRIPTION("Aardvark PCIe controller"); +MODULE_LICENSE("GPL v2"); |