Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

22 files changed, 11263 insertions, 0 deletions

diff --git a/drivers/parport/BUGS-parport b/drivers/parport/BUGS-parport
new file mode 100644
index 000000000000..622ca3cc7fa0
--- /dev/null
+++ b/drivers/parport/BUGS-parport
@@ -0,0 +1,9 @@
+Currently known (or at least suspected) bugs in parport:
+
+o lp doesn't allow you to read status while printing is in progress (is
+  this still true?).
+
+o parport_pc_ecp_read_block_pio() is broken.  parport will revert to the
+  software-driven mode in ieee1284_ops.c
+
+See <URL:http://people.redhat.com/twaugh/parport/>.
diff --git a/drivers/parport/ChangeLog b/drivers/parport/ChangeLog
new file mode 100644
index 000000000000..db717c1d62a5
--- /dev/null
+++ b/drivers/parport/ChangeLog
@@ -0,0 +1,583 @@
+2001-10-11  Tim Waugh  <twaugh@redhat.com>
+	* parport_pc.c, parport_serial.c: Support for NetMos cards.
+	+ Patch originally from Michael Reinelt <reinelt@eunet.at>.
+
+2002-04-25  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_serial.c, parport_pc.c: Move some SIIG cards around.
+	Patch from Andrey Panin.
+
+2002-01-20  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_compat_write_block_pio,
+	parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio):
+	Use the default implementations if the caller wants to use
+	O_NONBLOCK.
+
+2002-02-25  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Make sure that priv->ctr_writable includes IntEn
+	even if IRQ is given as a parameter.
+
+2002-01-21  Tim Waugh  <twaugh@redhat.com>
+
+	* daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select
+	work for ECP/EPP modes.
+
+2002-01-13  Niels Kristian Bech Jensen  <nkbj@image.dk>
+
+	* parport_pc.c: Change some occurrences of frob_set_mode to
+	ECR_WRITE.  This fixes PLIP.
+
+2002-01-04  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_claim_or_block): Sleep interruptibly to prevent
+	a possible deadlock.
+
+2001-12-07  Damian Gruszka  <damian.gruszka@VisionSystems.de>
+
+	* parport_pc.c (ECR_WRITE): Define.  If there are forbidden bits
+	in the ECR register for some chips, this will be a useful place to
+	put that knowledge.
+	(change_mode): Use ECR_WRITE.
+	(parport_pc_restore_state): Likewise.
+	(parport_ECPPS2_supported): Likewise.
+	(parport_ECPEPP_supported): Likewise.
+	(irq_probe_EPP): Likewise.
+	(programmable_irq_support): Likewise.
+	(programmable_dma_support): Likewise.
+	(parport_pc_probe_port): Likewise.
+
+	(frob_set_mode): New function.  Set the mode bits of the ECR.
+	(get_fifo_residue): Use frob_set_mode.
+	(parport_pc_ecpepp_read_data): Likewise.
+	(parport_pc_ecpepp_write_data): Likewise.
+	(parport_pc_ecpepp_read_addr): Likewise.
+	(parport_pc_ecpepp_write_addr): Likewise.
+	(parport_pc_compat_write_block_pio): Likewise.
+	(parport_pc_ecp_write_block_pio): Likewise.
+	(parport_ECR_present): Likewise.
+	(parport_ECP_supported): Likewise.
+	(parport_EPP_supported): Likewise.
+	(parport_ECPEPP_supported): Likewise.
+	(programmable_irq_support): Likewise.
+	(irq_probe_ECP): Likewise.
+	(programmable_dma_support): Likewise.
+
+	(parport_pc_enable_irq): Only enable interrupts if we know which
+	IRQ line they will come from.
+	(parport_pc_init_state): Set nErrIntrEn at initialisation.
+	(parport_pc_restore_state): Only write writable bits of CTR.
+	(parport_irq_probe): If no IRQ is found, take ackIntEn out of the
+	writable bit set.
+
+2001-12-07  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo.
+	(parport_pc_init_state): Only set ackIntEn if we know which IRQ
+	line the interrupts will come from.
+
+2001-12-07  Tim Waugh  <twaugh@redhat.com>
+
+	* ieee1284_ops.c (parport_ieee1284_epp_write_addr,
+	parport_ieee1284_epp_read_addr): Actually do something useful.
+
+2001-12-07  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (dmaval): Don't use DMA by default.  It seems to be
+	too buggy at the moment.  Use 'dma=auto' to restore the previous
+	behaviour.
+
+2001-12-07  Tim Waugh  <twaugh@redhat.com>
+
+	* daisy.c (DEBUG): Undefine.
+
+2001-12-06  Tim Waugh  <twaugh@redhat.com>
+
+	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off
+	PARPORT_CONTROL_AUTOFD as well.  Bug spotted by Joe
+	<joeja@mindspring.com>.
+
+2001-12-03  Rich Liu  <Rich.Liu@ite.com.tw>
+
+	* parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port
+	serial board, not a serial+parallel.
+
+2001-11-30  Niels Kristian Bech Jensen  <nkbj@image.dk>
+
+	* parport_pc.c: Fix compiler warning.
+
+2001-11-14  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before
+	and after probing for ports.
+	* parport_serial.c (parport_register): Likewise.
+
+2001-11-12  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (init_module): Warn when parameters are ignored.
+
+2001-11-01  Damian Gruszka  <damian.gruszka@VisionSystems.de>
+
+	* parport_serial.c (serial_register): Set base_baud before
+	calling register_serial.
+
+2001-10-26  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_irq_probe): When ECR programmable IRQ
+	support fails, generate interrupts using the FIFO even if we don't
+	want to use the FIFO for real data transfers.
+	(parport_pc_probe_port): Display the ECR address if we have an
+	ECR, not just if we will use the FIFO.
+
+2001-10-24  Dave Strauss  <D.Strauss@motorola.com>
+
+	* parport_pc.c (parport_pc_compat_write_block_pio,
+	parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP
+	transfer to finish up.
+
+2001-10-11  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc (sio_ite_8872_probe): New function, submitted by Rich
+	Liu from ITE.  Cleaned up, removed bogus phys_to_virt calls.
+
+2001-10-24  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Support for AKS AladdinCARD.  Patch from
+	Aladdin Knowledge Systems (Christian Groessler).
+
+2001-10-24  Tim Waugh  <twaugh@redhat.com>
+	
+	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise
+	turnaround time.
+
+	* ieee1284.c (parport_poll_peripheral): Try a couple of times
+	first without delaying.
+
+2001-10-10  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Support for OX16PCI954 PCI card.
+
+2001-10-10  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Support for OX12PCI840 PCI card (reported by
+	mk@daveg.com).  Lock-ups diagnosed by Ronnie Arosa (and now we
+	just don't trust its ECR).
+
+2001-10-10  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* parport_pc.c: Support for AVLAB cards.
+
+2001-10-10  Tim Waugh  <twaugh@redhat.com>
+
+	* ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward):
+	Remember to retry direction switch if it fails.  Patch from David
+	Lambert.
+
+2001-10-08  David C. Hansen  <haveblue@us.ibm.com>
+
+	* share.c: Make driverlist_lock and parportlist_lock static.
+
+2001-10-08  Philip Blundell  <philb@gnu.org>
+
+	* parport_pc.c: New modular parameter verbose_logging.
+	Make port->modes indicate the modes that we are prepared to use,
+	rather than the modes that are available.
+
+2001-10-07  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by
+	Kipp Cannon.
+
+2001-10-07  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_serial.c: Remove NetMos support, since it causes problems
+	for some people.
+
+2001-08-30  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_serial.c (parport_serial_pci_probe): Clean-up on partial
+	registration failure.
+
+2001-08-14  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_init_superio): Allow for more than one
+	SuperIO device.  Patch from Rich Lio (ITE).
+
+2001-08-11  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Support for Titan Electronics cards.
+
+2001-08-08  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_unregister_device): Remove device from wait list
+	too.
+
+2001-06-20  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Make 'io_hi=0' work.
+
+2001-05-31  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_serial.c: New file.
+
+2001-06-05  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_unregister_port): New exported function.
+	Do the opposite of parport_pc_probe_port.
+	(cleanup_module): Use it.
+
+2001-05-22  Juan Quintela  <quintela@mandrakesoft.com>
+
+	* parport_amiga.c: Set printk levels.
+	* parport_gsc.c: Likewise.
+	* parport_mfc3.c: Likewise.
+	* parport_pc.c: Likewise.
+	* parport_sunbpp.c: Likewise.
+	* probe.c: Likewise.
+	* share.c: Likewise.
+
+2001-05-10  Fred Barnes  <frmb2@ukc.ac.uk>
+
+       * parport_pc.c (parport_pc_epp_read_data): added support for
+       reading from a w91284pic peripheral, flag is PARPORT_W91284PIC.
+
+2001-05-07  Fred Barnes  <frmb2@ukc.ac.uk>
+ 
+ 	* parport_pc.c (parport_pc_epp_read_data,
+	parport_pc_epp_write_data, parport_pc_epp_read_addr,
+	parport_pc_epp_write_addr): support for fast reads/writes using
+	the PARPORT_EPP_FAST flag.
+ 
+ 	* ieee1284.c (parport_read, parport_write): added code to handle
+	software EPP mode (IEEE1284_MODE_EPPSWE).  Added code to allow
+	BYTE mode reverse transfers (previously always went for NIBBLE
+	mode).
+ 
+ 	* ieee1284_ops.c (parport_ieee1284_epp_read_data,
+	parport_ieee1284_epp_write_data): fixed various polarity problems.
+	Also (theoretically) fixed address versions (.._addr), but no
+	hardware to test this on.
+ 
+ 	* parport_pc.h: added parport_dump_state() function for debugging.
+ 	Needs to have DEBUG_PARPORT to be defined for it to be included.
+ 
+2001-05-03  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Fix the compile problem I introduce from the last
+	change.
+
+2001-04-20  Paul Gortmaker  <p_gortmaker@yahoo.com>
+
+	* parport_pc.c: Cut down the size quite a bit (more than 4k off
+	the object, about 1k off the zImage) for the older non-PCI
+	machines which are typically resource starved anyway...
+
+2001-03-26  R Horn  <rjh@world.std.com>
+
+	* parport_pc.c: Some commentary changes.
+
+2001-04-19  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_probe_port): Remove __devinit
+	attribute.  Export unconditionally.
+
+2001-04-14  Jeff Garzik  <jgarzik@pobox.com>
+
+	Merged:  2001-03-30  Tim Waugh  <twaugh@redhat.com>
+
+        * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave
+        like everything else with respect to irq= and dma= parameters.
+
+2001-04-08  Tim Waugh  <twaugh@redhat.com>
+
+      * parport_pc.c (parport_pc_save_state): Read from the soft copy of
+      the control port.
+      (parport_pc_restore_state): Update the soft copy of the control
+      port.
+
+2001-03-26  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_find_number, parport_find_base): Trigger
+	a lowlevel driver load if there are no ports yet.
+
+2001-03-26  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_ECP_supported): Remove the IRQ conflict
+	check since it seems totally unreliable.
+
+2001-03-02  Tim Waugh  <twaugh@redhat.com>
+
+	* ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
+	on timeout.  Matches 2.2.x behaviour.
+
+2001-03-02  Andrew Morton <andrewm@uow.edu.au>
+
+	* parport_pc.c (registered_parport): New static variable.
+	(parport_pc_find_ports): Set it when we register PCI driver.
+	(init_module): Unregister PCI driver if necessary when we
+	fail.
+
+2001-03-02  Tim Waugh  <twaugh@redhat.com>
+
+	* ieee1284_ops.c (parport_ieee1284_write_compat): Don't use
+	down_trylock to reset the IRQ count.  Don't even use sema_init,
+	because it's not even necessary to reset the count.  I can't
+	remember why we ever did.
+
+2001-01-04  Peter Osterlund  <peter.osterlund@mailbox.swipnet.se>
+
+	* ieee1284.c (parport_negotiate): Fix missing printk argument.
+
+2001-01-03  Paul Schleger  <Paul.Schleger@t-online.de>
+
+	* probe.c (parse_data): Get rid of trailing blanks in values.
+	Needed for XEROX XJ8C printer.
+
+2001-01-03  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_probe_port): Say something when probes
+	are omitted.
+
+2001-01-03  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (sio_via_686a_probe): Correct dma=255 fix.
+
+2000-11-21  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_ecp_write_block_pio): Fix
+	reverse-to-forward logic.  Spotted by Roland Kuck
+	<rci@cityweb.de>.
+
+2000-09-16  Cesar Eduardo Barros  <cesarb@nitnet.com.br>
+
+	* parport_pc.c (sio_via_686a_probe): Handle case
+	where hardware returns 255 for IRQ or DMA.
+
+2000-07-20  Eddie C. Dost  <ecd@skynet.be>
+
+	* share.c (attach_driver_chain): attach[i](port) needs to be
+	replaced by attach[count](port).
+
+2000-07-20  Eddie C. Dost  <ecd@skynet.be>
+
+	* daisy.c (add_dev): kmalloc args are in wrong order.
+
+2000-07-12  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c: Documentation for parport_{get,port}_port,
+	parport_find_{number,base}.
+
+2000-07-12  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_unregister_device): Remove unneeded locking
+	(test cad==dev).
+	(parport_claim): Likewise.
+	(parport_find_number): New function.
+
+2000-07-12  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_register_port): Hold the parportlist_lock while
+	looking for a free parport number.
+	(parport_register_driver): Make sure that attach can block.
+	(attach_driver_chain): Likewise.
+
+2000-07-12  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (call_driver_chain): Do reference counting things.
+	(parport_get_port): New function.
+	(parport_put_port): New function.
+	(parport_register_port): Initialise reference count to zero.
+	(parport_unregister_port): Check reference count rather than
+	driver list to see if we can free the port.
+
+2000-07-12  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c: Clarifications in doc comments.
+
+2000-07-12  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_unregister_port): Fix typo in comment.
+
+2000-07-11  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* parport_pc.c: Support for the full range of Timedia cards.
+
+2000-07-08  Tim Waugh  <twaugh@redhat.com>
+
+	* daisy.c: License block comments as part of parportbook.
+	* ieee1284.c: Likewise.
+	* share.c: Likewise.
+
+2000-06-30  Petr Vandrovec  <vandrove@vc.cvut.cz>
+
+	* procfs.c (do_hardware_modes): Generated string can be up to 34
+	chars long.
+
+2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* parport_pc.c (parport_pc_compat_write_block_pio): Warn about
+	change_mode failures.
+	(parport_pc_ecp_write_block_pio): Likewise.
+	(parport_pc_ecp_read_block_pio): Likewise.
+
+2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* parport_pc.c (parport_SPP_supported): Warn more about possibly
+	incorrect parameters.
+
+2000-06-15  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT
+	for ECP ports, since they can all do hardware accelerated
+	compatibility mode (I assume).
+
+2000-06-13  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (cleanup_module): Remark about possible bugs.
+
+2000-06-13  Tim Waugh  <twaugh@redhat.com>
+
+	* procfs.c: Break 'hardware' out into separate files.
+
+2000-05-28  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* Fix PCI ID printk for non-superio PCI cards.
+
+2000-05-28  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (call_driver_chain): Get the driverlist_lock.
+	(parport_register_device): Make sure that port->devices always
+	looks consistent.
+	(parport_register_driver): Ensure that parport drivers are given
+	parameters that are valid for the duration of the callback by
+	locking the portlist against changes.
+	(parport_unregister_driver): Likewise.
+	(parport_claim): Don't overwrite flags.
+
+2000-05-28  Tim Waugh  <twaugh@redhat.com>
+
+	* daisy.c (assign_addrs): Avoid double-probing daisy-chain devices
+	if the first probe succeeds.
+
+2000-05-16  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_claim): Fix SMP race.
+
+2000-05-15  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* parport_pc.c (parport_pc_compat_write_block_pio): Check for
+	timeouts.
+	(parport_pc_ecp_write_block_pio): Likewise.
+	(parport_pc_ecp_read_block_pio): Likewise.
+
+2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* parport_pc.c: PCI SYBA patch and verbose PCI detection.
+
+2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
+
+	* parport_pc.c (decode_smsc): Fix SMSC 665/666 identification.
+
+2000-04-28  Tim Waugh  <twaugh@redhat.com>
+
+	* ieee1284.c: Short function descriptions can't be multiline.
+
+	* daisy.c: Short function descriptions can't be multiline.
+
+2000-04-19  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen
+	calculation a bit clearer.
+
+	* ieee1284.c (parport_negotiate): Turn on data line drivers.
+
+	* ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line
+	drivers.
+	(parport_ieee1284_write_compat): Turn on data line drivers.
+
+	* daisy.c (assign_addrs): Turn on data line drivers.
+	(cpp_mux): Likewise.
+	(cpp_daisy): Likewise.
+
+2000-04-04  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Add support for another PCI card.
+
+2000-04-04  Tim Waugh  <twaugh@redhat.com>
+
+	* daisy.c: Documentation in kernel-doc format.
+
+	* ieee1284.c: Likewise.
+
+	* share.c: Likewise.
+
+2000-04-01  Tim Waugh  <twaugh@redhat.com>
+
+	* share.c (parport_register_device): Need to hold the module
+	reference counts before sleeping.
+
+2000-03-27  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
+	when peripheral is trying to send data when we stop listening.
+
+2000-03-22  Tim Waugh  <twaugh@redhat.com>
+
+	* init.c (parport_setup): Fix return value.
+
+2000-03-21  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_pci_probe): Fix return value; call
+	pci_enable_device.
+
+2000-03-16  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_ECP_supported): This seems to trigger on
+	machines that don't have an IRQ conflict; toned down the warning
+	message accordingly.
+
+2000-03-16  Gunther Mayer  <gunther.mayer@braunschweig.netsurf.de>
+
+	* parport_pc.c (show_parconfig_smsc37c669): Fix typo.
+	(decode_winbond): More IDs.
+	(winbond_check): Protect against false positives.
+	(winbond_check2): Likewise.
+	(smsc_check): Likewise.
+
+2000-03-15  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (cleanup_module): Don't call pci_unregister_driver
+	if we didn't call pci_register_driver first.
+
+2000-03-13  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (parport_pc_init): Moved from asm/parport.h.
+
+	* Config.in: CONFIG_PARPORT_PC_SUPERIO: new option.
+
+	* parport_pc.c (show_parconfig_smsc37c669): Make __devinit.
+	(show_parconfig_winbond): Likewise.
+	(decode_winbond): Likewise.
+	(decode_smsc): Likewise.
+	(winbond_check): Likewise.
+	(winbond_check2): Likewise.
+	(smsc_check): Likewise.
+	(detect_and_report_winbond): Likewise.
+	(detect_and_report_smsc): Likewise.
+	(get_superio_dma): Likewise.
+	(get_superio_irq): Likewise.
+	(parport_pc_find_isa_ports): New function.
+	(parport_pc_find_ports): New function.
+	(init_module): Make superio a config option, not a parameter.
+
+2000-03-10  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c (decode_winbond): Use correct 83877ATF chip ID.
+	(decode_winbond): Fix typo.
+
+2000-03-09  Tim Waugh  <twaugh@redhat.com>
+
+	* parport_pc.c: Integrate SuperIO PCI probe with normal PCI card
+	probe, so that the MODULE_DEVICE_TABLE is complete.
+
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
new file mode 100644
index 000000000000..731010e0e6f6
--- /dev/null
+++ b/drivers/parport/Kconfig
@@ -0,0 +1,145 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Parport configuration.
+#
+
+menu "Parallel port support"
+
+config PARPORT
+	tristate "Parallel port support"
+	---help---
+	  If you want to use devices connected to your machine's parallel port
+	  (the connector at the computer with 25 holes), e.g. printer, ZIP
+	  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
+	  create a mini network by connecting the parallel ports of two local
+	  machines) etc., then you need to say Y here; please read
+	  <file:Documentation/parport.txt> and
+	  <file:drivers/parport/BUGS-parport>.
+
+	  For extensive information about drivers for many devices attaching
+	  to the parallel port see <http://www.torque.net/linux-pp.html> on
+	  the WWW.
+
+	  It is possible to share a single parallel port among several devices
+	  and it is safe to compile all the corresponding drivers into the
+	  kernel. To compile parallel port support as a module, choose M here:
+	  the module will be called parport.
+	  If you have more than one parallel port and want to specify which
+	  port and IRQ to be used by this driver at module load time, take a
+	  look at <file:Documentation/parport.txt>.
+
+	  If unsure, say Y.
+
+config PARPORT_PC
+	tristate "PC-style hardware"
+	depends on PARPORT && (!SPARC64 || PCI) && (!SPARC32 || BROKEN)
+	---help---
+	  You should say Y here if you have a PC-style parallel port. All
+	  IBM PC compatible computers and some Alphas have PC-style
+	  parallel ports.  PA-RISC owners should only say Y here if they
+	  have a SuperIO parallel port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called parport_pc.
+
+	  If unsure, say Y.
+
+config PARPORT_SERIAL
+	tristate "Multi-IO cards (parallel and serial)"
+	depends on SERIAL_8250 && PARPORT_PC && PCI
+	help
+	  This adds support for multi-IO PCI cards that have parallel and
+	  serial ports.  You should say Y or M here.  If you say M, the module
+	  will be called parport_serial.
+
+config PARPORT_PC_FIFO
+	bool "Use FIFO/DMA if available (EXPERIMENTAL)"
+	depends on PARPORT_PC && EXPERIMENTAL
+	help
+	  Many parallel port chipsets provide hardware that can speed up
+	  printing. Say Y here if you want to take advantage of that.
+
+	  As well as actually having a FIFO, or DMA capability, the kernel
+	  will need to know which IRQ the parallel port has.  By default,
+	  parallel port interrupts will not be used, and so neither will the
+	  FIFO.  See <file:Documentation/parport.txt> to find out how to
+	  specify which IRQ/DMA to use.
+
+config PARPORT_PC_SUPERIO
+	bool "SuperIO chipset support (EXPERIMENTAL)"
+	depends on PARPORT_PC && EXPERIMENTAL
+	help
+	  Saying Y here enables some probes for Super-IO chipsets in order to
+	  find out things like base addresses, IRQ lines and DMA channels.  It
+	  is safe to say N.
+
+config PARPORT_PC_PCMCIA
+	tristate "Support for PCMCIA management for PC-style ports"
+	depends on PARPORT!=n && (PCMCIA!=n && PARPORT_PC=m && PARPORT_PC || PARPORT_PC=y && PCMCIA)
+	help
+	  Say Y here if you need PCMCIA support for your PC-style parallel
+	  ports. If unsure, say N.
+
+config PARPORT_NOT_PC
+	bool
+
+config PARPORT_ARC
+	tristate "Archimedes hardware"
+	depends on ARM && PARPORT
+	select PARPORT_NOT_PC
+
+config PARPORT_AMIGA
+	tristate "Amiga builtin port"
+	depends on AMIGA && PARPORT
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  Amiga machines. This code is also available as a module (say M),
+	  called parport_amiga. If in doubt, saying N is the safe plan.
+
+config PARPORT_MFC3
+	tristate "Multiface III parallel port"
+	depends on ZORRO && PARPORT
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need parallel port support for the MFC3 card.
+	  This code is also available as a module (say M), called
+	  parport_mfc3. If in doubt, saying N is the safe plan.
+
+config PARPORT_ATARI
+	tristate "Atari hardware"
+	depends on ATARI && PARPORT
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  Atari machines. This code is also available as a module (say M),
+	  called parport_atari. If in doubt, saying N is the safe plan.
+
+config PARPORT_GSC
+	tristate
+	default GSC
+	depends on PARPORT
+
+config PARPORT_SUNBPP
+	tristate "Sparc hardware (EXPERIMENTAL)"
+	depends on SBUS && PARPORT && EXPERIMENTAL
+	select PARPORT_NOT_PC
+	help
+	  This driver provides support for the bidirectional parallel port
+	  found on many Sun machines. Note that many of the newer Ultras
+	  actually have pc style hardware instead.
+
+config PARPORT_1284
+	bool "IEEE 1284 transfer modes"
+	depends on PARPORT
+	help
+	  If you have a printer that supports status readback or device ID, or
+	  want to use a device that uses enhanced parallel port transfer modes
+	  such as EPP and ECP, say Y here to enable advanced IEEE 1284
+	  transfer modes. Also say Y if you want device ID information to
+	  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+
+endmenu
+
diff --git a/drivers/parport/Makefile b/drivers/parport/Makefile
new file mode 100644
index 000000000000..5372212bb9d9
--- /dev/null
+++ b/drivers/parport/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the kernel Parallel port device drivers.
+#
+
+parport-objs	:= share.o ieee1284.o ieee1284_ops.o procfs.o
+
+ifeq ($(CONFIG_PARPORT_1284),y)
+	parport-objs	+= daisy.o probe.o
+endif
+
+obj-$(CONFIG_PARPORT)		+= parport.o
+obj-$(CONFIG_PARPORT_PC)	+= parport_pc.o
+obj-$(CONFIG_PARPORT_SERIAL)	+= parport_serial.o
+obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o
+obj-$(CONFIG_PARPORT_AMIGA)	+= parport_amiga.o
+obj-$(CONFIG_PARPORT_MFC3)	+= parport_mfc3.o
+obj-$(CONFIG_PARPORT_ATARI)	+= parport_atari.o
+obj-$(CONFIG_PARPORT_SUNBPP)	+= parport_sunbpp.o
+obj-$(CONFIG_PARPORT_GSC)	+= parport_gsc.o
diff --git a/drivers/parport/TODO-parport b/drivers/parport/TODO-parport
new file mode 100644
index 000000000000..089b14ee446f
--- /dev/null
+++ b/drivers/parport/TODO-parport
@@ -0,0 +1,20 @@
+Things to be done.
+
+0. Fix the bugs (see BUGS-parport).
+
+1. Proper documentation.
+
+2. A better lp.c:
+
+   a) ECP support would be nice.  This can only work if both the port and
+      the printer support it.
+
+   b) Handle status readback automatically.  IEEE1284 printers can post status
+      bits when they have something to say.  We should read out and deal 
+      with (maybe just log) whatever the printer wants to tell the world.
+
+3. Support more hardware (eg m68k, Sun bpp).
+
+4. A better PLIP (make use of bidirectional/ECP/EPP ports).
+
+See <URL:http://people.redhat.com/twaugh/parport/>.
diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c
new file mode 100644
index 000000000000..075c7eb5c85d
--- /dev/null
+++ b/drivers/parport/daisy.c
@@ -0,0 +1,512 @@
+/*
+ * IEEE 1284.3 Parallel port daisy chain and multiplexor code
+ * 
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * ??-12-1998: Initial implementation.
+ * 31-01-1999: Make port-cloning transparent.
+ * 13-02-1999: Move DeviceID technique from parport_probe.
+ * 13-03-1999: Get DeviceID from non-IEEE 1284.3 devices too.
+ * 22-02-2000: Count devices that are actually detected.
+ *
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include <asm/current.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk (stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+static struct daisydev {
+	struct daisydev *next;
+	struct parport *port;
+	int daisy;
+	int devnum;
+} *topology = NULL;
+static DEFINE_SPINLOCK(topology_lock);
+
+static int numdevs = 0;
+
+/* Forward-declaration of lower-level functions. */
+static int mux_present (struct parport *port);
+static int num_mux_ports (struct parport *port);
+static int select_port (struct parport *port);
+static int assign_addrs (struct parport *port);
+
+/* Add a device to the discovered topology. */
+static void add_dev (int devnum, struct parport *port, int daisy)
+{
+	struct daisydev *newdev, **p;
+	newdev = kmalloc (sizeof (struct daisydev), GFP_KERNEL);
+	if (newdev) {
+		newdev->port = port;
+		newdev->daisy = daisy;
+		newdev->devnum = devnum;
+		spin_lock(&topology_lock);
+		for (p = &topology; *p && (*p)->devnum<devnum; p = &(*p)->next)
+			;
+		newdev->next = *p;
+		*p = newdev;
+		spin_unlock(&topology_lock);
+	}
+}
+
+/* Clone a parport (actually, make an alias). */
+static struct parport *clone_parport (struct parport *real, int muxport)
+{
+	struct parport *extra = parport_register_port (real->base,
+						       real->irq,
+						       real->dma,
+						       real->ops);
+	if (extra) {
+		extra->portnum = real->portnum;
+		extra->physport = real;
+		extra->muxport = muxport;
+		real->slaves[muxport-1] = extra;
+	}
+
+	return extra;
+}
+
+/* Discover the IEEE1284.3 topology on a port -- muxes and daisy chains.
+ * Return value is number of devices actually detected. */
+int parport_daisy_init (struct parport *port)
+{
+	int detected = 0;
+	char *deviceid;
+	static const char *th[] = { /*0*/"th", "st", "nd", "rd", "th" };
+	int num_ports;
+	int i;
+	int last_try = 0;
+
+again:
+	/* Because this is called before any other devices exist,
+	 * we don't have to claim exclusive access.  */
+
+	/* If mux present on normal port, need to create new
+	 * parports for each extra port. */
+	if (port->muxport < 0 && mux_present (port) &&
+	    /* don't be fooled: a mux must have 2 or 4 ports. */
+	    ((num_ports = num_mux_ports (port)) == 2 || num_ports == 4)) {
+		/* Leave original as port zero. */
+		port->muxport = 0;
+		printk (KERN_INFO
+			"%s: 1st (default) port of %d-way multiplexor\n",
+			port->name, num_ports);
+		for (i = 1; i < num_ports; i++) {
+			/* Clone the port. */
+			struct parport *extra = clone_parport (port, i);
+			if (!extra) {
+				if (signal_pending (current))
+					break;
+
+				schedule ();
+				continue;
+			}
+
+			printk (KERN_INFO
+				"%s: %d%s port of %d-way multiplexor on %s\n",
+				extra->name, i + 1, th[i + 1], num_ports,
+				port->name);
+
+			/* Analyse that port too.  We won't recurse
+			   forever because of the 'port->muxport < 0'
+			   test above. */
+			parport_daisy_init(extra);
+		}
+	}
+
+	if (port->muxport >= 0)
+		select_port (port);
+
+	parport_daisy_deselect_all (port);
+	detected += assign_addrs (port);
+
+	/* Count the potential legacy device at the end. */
+	add_dev (numdevs++, port, -1);
+
+	/* Find out the legacy device's IEEE 1284 device ID. */
+	deviceid = kmalloc (1000, GFP_KERNEL);
+	if (deviceid) {
+		if (parport_device_id (numdevs - 1, deviceid, 1000) > 2)
+			detected++;
+
+		kfree (deviceid);
+	}
+
+	if (!detected && !last_try) {
+		/* No devices were detected.  Perhaps they are in some
+                   funny state; let's try to reset them and see if
+                   they wake up. */
+		parport_daisy_fini (port);
+		parport_write_control (port, PARPORT_CONTROL_SELECT);
+		udelay (50);
+		parport_write_control (port,
+				       PARPORT_CONTROL_SELECT |
+				       PARPORT_CONTROL_INIT);
+		udelay (50);
+		last_try = 1;
+		goto again;
+	}
+
+	return detected;
+}
+
+/* Forget about devices on a physical port. */
+void parport_daisy_fini (struct parport *port)
+{
+	struct daisydev **p;
+
+	spin_lock(&topology_lock);
+	p = &topology;
+	while (*p) {
+		struct daisydev *dev = *p;
+		if (dev->port != port) {
+			p = &dev->next;
+			continue;
+		}
+		*p = dev->next;
+		kfree(dev);
+	}
+
+	/* Gaps in the numbering could be handled better.  How should
+           someone enumerate through all IEEE1284.3 devices in the
+           topology?. */
+	if (!topology) numdevs = 0;
+	spin_unlock(&topology_lock);
+	return;
+}
+
+/**
+ *	parport_open - find a device by canonical device number
+ *	@devnum: canonical device number
+ *	@name: name to associate with the device
+ *	@pf: preemption callback
+ *	@kf: kick callback
+ *	@irqf: interrupt handler
+ *	@flags: registration flags
+ *	@handle: driver data
+ *
+ *	This function is similar to parport_register_device(), except
+ *	that it locates a device by its number rather than by the port
+ *	it is attached to.
+ *
+ *	All parameters except for @devnum are the same as for
+ *	parport_register_device().  The return value is the same as
+ *	for parport_register_device().
+ **/
+
+struct pardevice *parport_open (int devnum, const char *name,
+				int (*pf) (void *), void (*kf) (void *),
+				void (*irqf) (int, void *, struct pt_regs *),
+				int flags, void *handle)
+{
+	struct daisydev *p = topology;
+	struct parport *port;
+	struct pardevice *dev;
+	int daisy;
+
+	spin_lock(&topology_lock);
+	while (p && p->devnum != devnum)
+		p = p->next;
+
+	if (!p) {
+		spin_unlock(&topology_lock);
+		return NULL;
+	}
+
+	daisy = p->daisy;
+	port = parport_get_port(p->port);
+	spin_unlock(&topology_lock);
+
+	dev = parport_register_device (port, name, pf, kf,
+				       irqf, flags, handle);
+	parport_put_port(port);
+	if (!dev)
+		return NULL;
+
+	dev->daisy = daisy;
+
+	/* Check that there really is a device to select. */
+	if (daisy >= 0) {
+		int selected;
+		parport_claim_or_block (dev);
+		selected = port->daisy;
+		parport_release (dev);
+
+		if (selected != port->daisy) {
+			/* No corresponding device. */
+			parport_unregister_device (dev);
+			return NULL;
+		}
+	}
+
+	return dev;
+}
+
+/**
+ *	parport_close - close a device opened with parport_open()
+ *	@dev: device to close
+ *
+ *	This is to parport_open() as parport_unregister_device() is to
+ *	parport_register_device().
+ **/
+
+void parport_close (struct pardevice *dev)
+{
+	parport_unregister_device (dev);
+}
+
+/**
+ *	parport_device_num - convert device coordinates
+ *	@parport: parallel port number
+ *	@mux: multiplexor port number (-1 for no multiplexor)
+ *	@daisy: daisy chain address (-1 for no daisy chain address)
+ *
+ *	This tries to locate a device on the given parallel port,
+ *	multiplexor port and daisy chain address, and returns its
+ *	device number or -NXIO if no device with those coordinates
+ *	exists.
+ **/
+
+int parport_device_num (int parport, int mux, int daisy)
+{
+	int res = -ENXIO;
+	struct daisydev *dev;
+
+	spin_lock(&topology_lock);
+	dev = topology;
+	while (dev && dev->port->portnum != parport &&
+	       dev->port->muxport != mux && dev->daisy != daisy)
+		dev = dev->next;
+	if (dev)
+		res = dev->devnum;
+	spin_unlock(&topology_lock);
+
+	return res;
+}
+
+/* Send a daisy-chain-style CPP command packet. */
+static int cpp_daisy (struct parport *port, int cmd)
+{
+	unsigned char s;
+
+	parport_data_forward (port);
+	parport_write_data (port, 0xaa); udelay (2);
+	parport_write_data (port, 0x55); udelay (2);
+	parport_write_data (port, 0x00); udelay (2);
+	parport_write_data (port, 0xff); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_BUSY
+		  | PARPORT_STATUS_PAPEROUT
+		  | PARPORT_STATUS_SELECT
+		  | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: cpp_daisy: aa5500ff(%02x)\n",
+			 port->name, s);
+		return -ENXIO;
+	}
+
+	parport_write_data (port, 0x87); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: cpp_daisy: aa5500ff87(%02x)\n",
+			 port->name, s);
+		return -ENXIO;
+	}
+
+	parport_write_data (port, 0x78); udelay (2);
+	parport_write_data (port, cmd); udelay (2);
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE,
+			      PARPORT_CONTROL_STROBE);
+	udelay (1);
+	parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+	udelay (1);
+	s = parport_read_status (port);
+	parport_write_data (port, 0xff); udelay (2);
+
+	return s;
+}
+
+/* Send a mux-style CPP command packet. */
+static int cpp_mux (struct parport *port, int cmd)
+{
+	unsigned char s;
+	int rc;
+
+	parport_data_forward (port);
+	parport_write_data (port, 0xaa); udelay (2);
+	parport_write_data (port, 0x55); udelay (2);
+	parport_write_data (port, 0xf0); udelay (2);
+	parport_write_data (port, 0x0f); udelay (2);
+	parport_write_data (port, 0x52); udelay (2);
+	parport_write_data (port, 0xad); udelay (2);
+	parport_write_data (port, cmd); udelay (2);
+
+	s = parport_read_status (port);
+	if (!(s & PARPORT_STATUS_ACK)) {
+		DPRINTK (KERN_DEBUG "%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
+			 port->name, cmd, s);
+		return -EIO;
+	}
+
+	rc = (((s & PARPORT_STATUS_SELECT   ? 1 : 0) << 0) |
+	      ((s & PARPORT_STATUS_PAPEROUT ? 1 : 0) << 1) |
+	      ((s & PARPORT_STATUS_BUSY     ? 0 : 1) << 2) |
+	      ((s & PARPORT_STATUS_ERROR    ? 0 : 1) << 3));
+
+	return rc;
+}
+
+void parport_daisy_deselect_all (struct parport *port)
+{
+	cpp_daisy (port, 0x30);
+}
+
+int parport_daisy_select (struct parport *port, int daisy, int mode)
+{
+	switch (mode)
+	{
+		// For these modes we should switch to EPP mode:
+		case IEEE1284_MODE_EPP:
+		case IEEE1284_MODE_EPPSL:
+		case IEEE1284_MODE_EPPSWE:
+			return (cpp_daisy (port, 0x20 + daisy) &
+				PARPORT_STATUS_ERROR);
+
+		// For these modes we should switch to ECP mode:
+		case IEEE1284_MODE_ECP:
+		case IEEE1284_MODE_ECPRLE:
+		case IEEE1284_MODE_ECPSWE: 
+			return (cpp_daisy (port, 0xd0 + daisy) &
+				PARPORT_STATUS_ERROR);
+
+		// Nothing was told for BECP in Daisy chain specification.
+		// May be it's wise to use ECP?
+		case IEEE1284_MODE_BECP:
+		// Others use compat mode
+		case IEEE1284_MODE_NIBBLE:
+		case IEEE1284_MODE_BYTE:
+		case IEEE1284_MODE_COMPAT:
+		default:
+			return (cpp_daisy (port, 0xe0 + daisy) &
+				PARPORT_STATUS_ERROR);
+	}
+}
+
+static int mux_present (struct parport *port)
+{
+	return cpp_mux (port, 0x51) == 3;
+}
+
+static int num_mux_ports (struct parport *port)
+{
+	return cpp_mux (port, 0x58);
+}
+
+static int select_port (struct parport *port)
+{
+	int muxport = port->muxport;
+	return cpp_mux (port, 0x60 + muxport) == muxport;
+}
+
+static int assign_addrs (struct parport *port)
+{
+	unsigned char s, last_dev;
+	unsigned char daisy;
+	int thisdev = numdevs;
+	int detected;
+	char *deviceid;
+
+	parport_data_forward (port);
+	parport_write_data (port, 0xaa); udelay (2);
+	parport_write_data (port, 0x55); udelay (2);
+	parport_write_data (port, 0x00); udelay (2);
+	parport_write_data (port, 0xff); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_BUSY
+		  | PARPORT_STATUS_PAPEROUT
+		  | PARPORT_STATUS_SELECT
+		  | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: assign_addrs: aa5500ff(%02x)\n",
+			 port->name, s);
+		return 0;
+	}
+
+	parport_write_data (port, 0x87); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: assign_addrs: aa5500ff87(%02x)\n",
+			 port->name, s);
+		return 0;
+	}
+
+	parport_write_data (port, 0x78); udelay (2);
+	last_dev = 0; /* We've just been speaking to a device, so we
+			 know there must be at least _one_ out there. */
+
+	for (daisy = 0; daisy < 4; daisy++) {
+		parport_write_data (port, daisy);
+		udelay (2);
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (1);
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+		udelay (1);
+
+		if (last_dev)
+			/* No more devices. */
+			break;
+
+		last_dev = !(parport_read_status (port)
+			     & PARPORT_STATUS_BUSY);
+
+		add_dev (numdevs++, port, daisy);
+	}
+
+	parport_write_data (port, 0xff); udelay (2);
+	detected = numdevs - thisdev;
+	DPRINTK (KERN_DEBUG "%s: Found %d daisy-chained devices\n", port->name,
+		 detected);
+
+	/* Ask the new devices to introduce themselves. */
+	deviceid = kmalloc (1000, GFP_KERNEL);
+	if (!deviceid) return 0;
+
+	for (daisy = 0; thisdev < numdevs; thisdev++, daisy++)
+		parport_device_id (thisdev, deviceid, 1000);
+
+	kfree (deviceid);
+	return detected;
+}
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
new file mode 100644
index 000000000000..694bae162fed
--- /dev/null
+++ b/drivers/parport/ieee1284.c
@@ -0,0 +1,819 @@
+/* $Id: parport_ieee1284.c,v 1.4 1997/10/19 21:37:21 philip Exp $
+ * IEEE-1284 implementation for parport.
+ *
+ * Authors: Phil Blundell <philb@gnu.org>
+ *          Carsten Gross <carsten@sol.wohnheim.uni-ulm.de>
+ *	    Jose Renau <renau@acm.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk> (largely rewritten)
+ *
+ * This file is responsible for IEEE 1284 negotiation, and for handing
+ * read/write requests to low-level drivers.
+ *
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ *
+ * Various hacks, Fred Barnes <frmb2@ukc.ac.uk>, 04/2000
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+
+#undef DEBUG /* undef me for production */
+
+#ifdef CONFIG_LP_CONSOLE
+#undef DEBUG /* Don't want a garbled console */
+#endif
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk (stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+/* Make parport_wait_peripheral wake up.
+ * It will be useful to call this from an interrupt handler. */
+static void parport_ieee1284_wakeup (struct parport *port)
+{
+	up (&port->physport->ieee1284.irq);
+}
+
+static struct parport *port_from_cookie[PARPORT_MAX];
+static void timeout_waiting_on_port (unsigned long cookie)
+{
+	parport_ieee1284_wakeup (port_from_cookie[cookie % PARPORT_MAX]);
+}
+
+/**
+ *	parport_wait_event - wait for an event on a parallel port
+ *	@port: port to wait on
+ *	@timeout: time to wait (in jiffies)
+ *
+ *	This function waits for up to @timeout jiffies for an
+ *	interrupt to occur on a parallel port.  If the port timeout is
+ *	set to zero, it returns immediately.
+ *
+ *	If an interrupt occurs before the timeout period elapses, this
+ *	function returns one immediately.  If it times out, it returns
+ *	a value greater than zero.  An error code less than zero
+ *	indicates an error (most likely a pending signal), and the
+ *	calling code should finish what it's doing as soon as it can.
+ */
+
+int parport_wait_event (struct parport *port, signed long timeout)
+{
+	int ret;
+	struct timer_list timer;
+
+	if (!port->physport->cad->timeout)
+		/* Zero timeout is special, and we can't down() the
+		   semaphore. */
+		return 1;
+
+	init_timer (&timer);
+	timer.expires = jiffies + timeout;
+	timer.function = timeout_waiting_on_port;
+	port_from_cookie[port->number % PARPORT_MAX] = port;
+	timer.data = port->number;
+
+	add_timer (&timer);
+	ret = down_interruptible (&port->physport->ieee1284.irq);
+	if (!del_timer (&timer) && !ret)
+		/* Timed out. */
+		ret = 1;
+
+	return ret;
+}
+
+/**
+ *	parport_poll_peripheral - poll status lines
+ *	@port: port to watch
+ *	@mask: status lines to watch
+ *	@result: desired values of chosen status lines
+ *	@usec: timeout
+ *
+ *	This function busy-waits until the masked status lines have
+ *	the desired values, or until the timeout period elapses.  The
+ *	@mask and @result parameters are bitmasks, with the bits
+ *	defined by the constants in parport.h: %PARPORT_STATUS_BUSY,
+ *	and so on.
+ *
+ *	This function does not call schedule(); instead it busy-waits
+ *	using udelay().  It currently has a resolution of 5usec.
+ *
+ *	If the status lines take on the desired values before the
+ *	timeout period elapses, parport_poll_peripheral() returns zero
+ *	immediately.  A zero return value greater than zero indicates
+ *	a timeout.  An error code (less than zero) indicates an error,
+ *	most likely a signal that arrived, and the caller should
+ *	finish what it is doing as soon as possible.
+*/
+
+int parport_poll_peripheral(struct parport *port,
+			    unsigned char mask,
+			    unsigned char result,
+			    int usec)
+{
+	/* Zero return code is success, >0 is timeout. */
+	int count = usec / 5 + 2;
+	int i;
+	unsigned char status;
+	for (i = 0; i < count; i++) {
+		status = parport_read_status (port);
+		if ((status & mask) == result)
+			return 0;
+		if (signal_pending (current))
+			return -EINTR;
+		if (need_resched())
+			break;
+		if (i >= 2)
+			udelay (5);
+	}
+
+	return 1;
+}
+
+/**
+ *	parport_wait_peripheral - wait for status lines to change in 35ms
+ *	@port: port to watch
+ *	@mask: status lines to watch
+ *	@result: desired values of chosen status lines
+ *
+ *	This function waits until the masked status lines have the
+ *	desired values, or until 35ms have elapsed (see IEEE 1284-1994
+ *	page 24 to 25 for why this value in particular is hardcoded).
+ *	The @mask and @result parameters are bitmasks, with the bits
+ *	defined by the constants in parport.h: %PARPORT_STATUS_BUSY,
+ *	and so on.
+ *
+ *	The port is polled quickly to start off with, in anticipation
+ *	of a fast response from the peripheral.  This fast polling
+ *	time is configurable (using /proc), and defaults to 500usec.
+ *	If the timeout for this port (see parport_set_timeout()) is
+ *	zero, the fast polling time is 35ms, and this function does
+ *	not call schedule().
+ *
+ *	If the timeout for this port is non-zero, after the fast
+ *	polling fails it uses parport_wait_event() to wait for up to
+ *	10ms, waking up if an interrupt occurs.
+ */
+
+int parport_wait_peripheral(struct parport *port,
+			    unsigned char mask, 
+			    unsigned char result)
+{
+	int ret;
+	int usec;
+	unsigned long deadline;
+	unsigned char status;
+
+	usec = port->physport->spintime; /* usecs of fast polling */
+	if (!port->physport->cad->timeout)
+		/* A zero timeout is "special": busy wait for the
+		   entire 35ms. */
+		usec = 35000;
+
+	/* Fast polling.
+	 *
+	 * This should be adjustable.
+	 * How about making a note (in the device structure) of how long
+	 * it takes, so we know for next time?
+	 */
+	ret = parport_poll_peripheral (port, mask, result, usec);
+	if (ret != 1)
+		return ret;
+
+	if (!port->physport->cad->timeout)
+		/* We may be in an interrupt handler, so we can't poll
+		 * slowly anyway. */
+		return 1;
+
+	/* 40ms of slow polling. */
+	deadline = jiffies + (HZ + 24) / 25;
+	while (time_before (jiffies, deadline)) {
+		int ret;
+
+		if (signal_pending (current))
+			return -EINTR;
+
+		/* Wait for 10ms (or until an interrupt occurs if
+		 * the handler is set) */
+		if ((ret = parport_wait_event (port, (HZ + 99) / 100)) < 0)
+			return ret;
+
+		status = parport_read_status (port);
+		if ((status & mask) == result)
+			return 0;
+
+		if (!ret) {
+			/* parport_wait_event didn't time out, but the
+			 * peripheral wasn't actually ready either.
+			 * Wait for another 10ms. */
+			__set_current_state (TASK_INTERRUPTIBLE);
+			schedule_timeout ((HZ+ 99) / 100);
+		}
+	}
+
+	return 1;
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Terminate a negotiated mode. */
+static void parport_ieee1284_terminate (struct parport *port)
+{
+	int r;
+	port = port->physport;
+
+	/* EPP terminates differently. */
+	switch (port->ieee1284.mode) {
+	case IEEE1284_MODE_EPP:
+	case IEEE1284_MODE_EPPSL:
+	case IEEE1284_MODE_EPPSWE:
+		/* Terminate from EPP mode. */
+
+		/* Event 68: Set nInit low */
+		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+		udelay (50);
+
+		/* Event 69: Set nInit high, nSelectIn low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_INIT);
+		break;
+
+	case IEEE1284_MODE_ECP:
+	case IEEE1284_MODE_ECPRLE:
+	case IEEE1284_MODE_ECPSWE:
+		/* In ECP we can only terminate from fwd idle phase. */
+		if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+			/* Event 47: Set nInit high */
+			parport_frob_control (port,
+					      PARPORT_CONTROL_INIT
+					      | PARPORT_CONTROL_AUTOFD,
+					      PARPORT_CONTROL_INIT
+					      | PARPORT_CONTROL_AUTOFD);
+
+			/* Event 49: PError goes high */
+			r = parport_wait_peripheral (port,
+						     PARPORT_STATUS_PAPEROUT,
+						     PARPORT_STATUS_PAPEROUT);
+			if (r)
+				DPRINTK (KERN_INFO "%s: Timeout at event 49\n",
+					 port->name);
+
+			parport_data_forward (port);
+			DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+				 port->name);
+			port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+		}
+
+		/* fall-though.. */
+
+	default:
+		/* Terminate from all other modes. */
+
+		/* Event 22: Set nSelectIn low, nAutoFd high */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_SELECT);
+
+		/* Event 24: nAck goes low */
+		r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+		if (r)
+			DPRINTK (KERN_INFO "%s: Timeout at event 24\n",
+				 port->name);
+
+		/* Event 25: Set nAutoFd low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 27: nAck goes high */
+		r = parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK, 
+					     PARPORT_STATUS_ACK);
+		if (r)
+			DPRINTK (KERN_INFO "%s: Timeout at event 27\n",
+				 port->name);
+
+		/* Event 29: Set nAutoFd high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+	}
+
+	port->ieee1284.mode = IEEE1284_MODE_COMPAT;
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	DPRINTK (KERN_DEBUG "%s: In compatibility (forward idle) mode\n",
+		 port->name);
+}		
+#endif /* IEEE1284 support */
+
+/**
+ *	parport_negotiate - negotiate an IEEE 1284 mode
+ *	@port: port to use
+ *	@mode: mode to negotiate to
+ *
+ *	Use this to negotiate to a particular IEEE 1284 transfer mode.
+ *	The @mode parameter should be one of the constants in
+ *	parport.h starting %IEEE1284_MODE_xxx.
+ *
+ *	The return value is 0 if the peripheral has accepted the
+ *	negotiation to the mode specified, -1 if the peripheral is not
+ *	IEEE 1284 compliant (or not present), or 1 if the peripheral
+ *	has rejected the negotiation.
+ */
+
+int parport_negotiate (struct parport *port, int mode)
+{
+#ifndef CONFIG_PARPORT_1284
+	if (mode == IEEE1284_MODE_COMPAT)
+		return 0;
+	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	return -1;
+#else
+	int m = mode & ~IEEE1284_ADDR;
+	int r;
+	unsigned char xflag;
+
+	port = port->physport;
+
+	/* Is there anything to do? */
+	if (port->ieee1284.mode == mode)
+		return 0;
+
+	/* Is the difference just an address-or-not bit? */
+	if ((port->ieee1284.mode & ~IEEE1284_ADDR) == (mode & ~IEEE1284_ADDR)){
+		port->ieee1284.mode = mode;
+		return 0;
+	}
+
+	/* Go to compability forward idle mode */
+	if (port->ieee1284.mode != IEEE1284_MODE_COMPAT)
+		parport_ieee1284_terminate (port);
+
+	if (mode == IEEE1284_MODE_COMPAT)
+		/* Compatibility mode: no negotiation. */
+		return 0; 
+
+	switch (mode) {
+	case IEEE1284_MODE_ECPSWE:
+		m = IEEE1284_MODE_ECP;
+		break;
+	case IEEE1284_MODE_EPPSL:
+	case IEEE1284_MODE_EPPSWE:
+		m = IEEE1284_MODE_EPP;
+		break;
+	case IEEE1284_MODE_BECP:
+		return -ENOSYS; /* FIXME (implement BECP) */
+	}
+
+	if (mode & IEEE1284_EXT_LINK)
+		m = 1<<7; /* request extensibility link */
+
+	port->ieee1284.phase = IEEE1284_PH_NEGOTIATION;
+
+	/* Start off with nStrobe and nAutoFd high, and nSelectIn low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_SELECT,
+			      PARPORT_CONTROL_SELECT);
+	udelay(1);
+
+	/* Event 0: Set data */
+	parport_data_forward (port);
+	parport_write_data (port, m);
+	udelay (400); /* Shouldn't need to wait this long. */
+
+	/* Event 1: Set nSelectIn high, nAutoFd low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_SELECT
+			      | PARPORT_CONTROL_AUTOFD,
+			      PARPORT_CONTROL_AUTOFD);
+
+	/* Event 2: PError, Select, nFault go high, nAck goes low */
+	if (parport_wait_peripheral (port,
+				     PARPORT_STATUS_ERROR
+				     | PARPORT_STATUS_SELECT
+				     | PARPORT_STATUS_PAPEROUT
+				     | PARPORT_STATUS_ACK,
+				     PARPORT_STATUS_ERROR
+				     | PARPORT_STATUS_SELECT
+				     | PARPORT_STATUS_PAPEROUT)) {
+		/* Timeout */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_SELECT);
+		DPRINTK (KERN_DEBUG
+			 "%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
+			 port->name, parport_read_status (port));
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+		return -1; /* Not IEEE1284 compliant */
+	}
+
+	/* Event 3: Set nStrobe low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE,
+			      PARPORT_CONTROL_STROBE);
+
+	/* Event 4: Set nStrobe and nAutoFd high */
+	udelay (5);
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_AUTOFD,
+			      0);
+
+	/* Event 6: nAck goes high */
+	if (parport_wait_peripheral (port,
+				     PARPORT_STATUS_ACK,
+				     PARPORT_STATUS_ACK)) {
+		/* This shouldn't really happen with a compliant device. */
+		DPRINTK (KERN_DEBUG
+			 "%s: Mode 0x%02x not supported? (0x%02x)\n",
+			 port->name, mode, port->ops->read_status (port));
+		parport_ieee1284_terminate (port);
+		return 1;
+	}
+
+	xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
+
+	/* xflag should be high for all modes other than nibble (0). */
+	if (mode && !xflag) {
+		/* Mode not supported. */
+		DPRINTK (KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n",
+			 port->name, mode);
+		parport_ieee1284_terminate (port);
+		return 1;
+	}
+
+	/* More to do if we've requested extensibility link. */
+	if (mode & IEEE1284_EXT_LINK) {
+		m = mode & 0x7f;
+		udelay (1);
+		parport_write_data (port, m);
+		udelay (1);
+
+		/* Event 51: Set nStrobe low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+
+		/* Event 52: nAck goes low */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
+			/* This peripheral is _very_ slow. */
+			DPRINTK (KERN_DEBUG
+				 "%s: Event 52 didn't happen\n",
+				 port->name);
+			parport_ieee1284_terminate (port);
+			return 1;
+		}
+
+		/* Event 53: Set nStrobe high */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      0);
+
+		/* Event 55: nAck goes high */
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* This shouldn't really happen with a compliant
+			 * device. */
+			DPRINTK (KERN_DEBUG
+				 "%s: Mode 0x%02x not supported? (0x%02x)\n",
+				 port->name, mode,
+				 port->ops->read_status (port));
+			parport_ieee1284_terminate (port);
+			return 1;
+		}
+
+		/* Event 54: Peripheral sets XFlag to reflect support */
+		xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
+
+		/* xflag should be high. */
+		if (!xflag) {
+			/* Extended mode not supported. */
+			DPRINTK (KERN_DEBUG "%s: Extended mode 0x%02x not "
+				 "supported\n", port->name, mode);
+			parport_ieee1284_terminate (port);
+			return 1;
+		}
+
+		/* Any further setup is left to the caller. */
+	}
+
+	/* Mode is supported */
+	DPRINTK (KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode);
+	port->ieee1284.mode = mode;
+
+	/* But ECP is special */
+	if (!(mode & IEEE1284_EXT_LINK) && (m & IEEE1284_MODE_ECP)) {
+		port->ieee1284.phase = IEEE1284_PH_ECP_SETUP;
+
+		/* Event 30: Set nAutoFd low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 31: PError goes high. */
+		r = parport_wait_peripheral (port,
+					     PARPORT_STATUS_PAPEROUT,
+					     PARPORT_STATUS_PAPEROUT);
+		if (r) {
+			DPRINTK (KERN_INFO "%s: Timeout at event 31\n",
+				port->name);
+		}
+
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+		DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+			 port->name);
+	} else switch (mode) {
+	case IEEE1284_MODE_NIBBLE:
+	case IEEE1284_MODE_BYTE:
+		port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+		break;
+	default:
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+	}
+
+
+	return 0;
+#endif /* IEEE1284 support */
+}
+
+/* Acknowledge that the peripheral has data available.
+ * Events 18-20, in order to get from Reverse Idle phase
+ * to Host Busy Data Available.
+ * This will most likely be called from an interrupt.
+ * Returns zero if data was available.
+ */
+#ifdef CONFIG_PARPORT_1284
+static int parport_ieee1284_ack_data_avail (struct parport *port)
+{
+	if (parport_read_status (port) & PARPORT_STATUS_ERROR)
+		/* Event 18 didn't happen. */
+		return -1;
+
+	/* Event 20: nAutoFd goes high. */
+	port->ops->frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+	port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+	return 0;
+}
+#endif /* IEEE1284 support */
+
+/* Handle an interrupt. */
+void parport_ieee1284_interrupt (int which, void *handle, struct pt_regs *regs)
+{
+	struct parport *port = handle;
+	parport_ieee1284_wakeup (port);
+
+#ifdef CONFIG_PARPORT_1284
+	if (port->ieee1284.phase == IEEE1284_PH_REV_IDLE) {
+		/* An interrupt in this phase means that data
+		 * is now available. */
+		DPRINTK (KERN_DEBUG "%s: Data available\n", port->name);
+		parport_ieee1284_ack_data_avail (port);
+	}
+#endif /* IEEE1284 support */
+}
+
+/**
+ *	parport_write - write a block of data to a parallel port
+ *	@port: port to write to
+ *	@buffer: data buffer (in kernel space)
+ *	@len: number of bytes of data to transfer
+ *
+ *	This will write up to @len bytes of @buffer to the port
+ *	specified, using the IEEE 1284 transfer mode most recently
+ *	negotiated to (using parport_negotiate()), as long as that
+ *	mode supports forward transfers (host to peripheral).
+ *
+ *	It is the caller's responsibility to ensure that the first
+ *	@len bytes of @buffer are valid.
+ *
+ *	This function returns the number of bytes transferred (if zero
+ *	or positive), or else an error code.
+ */
+
+ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
+{
+#ifndef CONFIG_PARPORT_1284
+	return port->ops->compat_write_data (port, buffer, len, 0);
+#else
+	ssize_t retval;
+	int mode = port->ieee1284.mode;
+	int addr = mode & IEEE1284_ADDR;
+	size_t (*fn) (struct parport *, const void *, size_t, int);
+
+	/* Ignore the device-ID-request bit and the address bit. */
+	mode &= ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
+
+	/* Use the mode we're in. */
+	switch (mode) {
+	case IEEE1284_MODE_NIBBLE:
+	case IEEE1284_MODE_BYTE:
+		parport_negotiate (port, IEEE1284_MODE_COMPAT);
+	case IEEE1284_MODE_COMPAT:
+		DPRINTK (KERN_DEBUG "%s: Using compatibility mode\n",
+			 port->name);
+		fn = port->ops->compat_write_data;
+		break;
+
+	case IEEE1284_MODE_EPP:
+		DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+		if (addr) {
+			fn = port->ops->epp_write_addr;
+		} else {
+			fn = port->ops->epp_write_data;
+		}
+		break;
+	case IEEE1284_MODE_EPPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
+			port->name);
+		if (addr) {
+			fn = parport_ieee1284_epp_write_addr;
+		} else {
+			fn = parport_ieee1284_epp_write_data;
+		}
+		break;
+	case IEEE1284_MODE_ECP:
+	case IEEE1284_MODE_ECPRLE:
+		DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+		if (addr) {
+			fn = port->ops->ecp_write_addr;
+		} else {
+			fn = port->ops->ecp_write_data;
+		}
+		break;
+
+	case IEEE1284_MODE_ECPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
+			 port->name);
+		/* The caller has specified that it must be emulated,
+		 * even if we have ECP hardware! */
+		if (addr) {
+			fn = parport_ieee1284_ecp_write_addr;
+		} else {
+			fn = parport_ieee1284_ecp_write_data;
+		}
+		break;
+
+	default:
+		DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
+			port->ieee1284.mode);
+		return -ENOSYS;
+	}
+
+	retval = (*fn) (port, buffer, len, 0);
+	DPRINTK (KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len);
+	return retval;
+#endif /* IEEE1284 support */
+}
+
+/**
+ *	parport_read - read a block of data from a parallel port
+ *	@port: port to read from
+ *	@buffer: data buffer (in kernel space)
+ *	@len: number of bytes of data to transfer
+ *
+ *	This will read up to @len bytes of @buffer to the port
+ *	specified, using the IEEE 1284 transfer mode most recently
+ *	negotiated to (using parport_negotiate()), as long as that
+ *	mode supports reverse transfers (peripheral to host).
+ *
+ *	It is the caller's responsibility to ensure that the first
+ *	@len bytes of @buffer are available to write to.
+ *
+ *	This function returns the number of bytes transferred (if zero
+ *	or positive), or else an error code.
+ */
+
+ssize_t parport_read (struct parport *port, void *buffer, size_t len)
+{
+#ifndef CONFIG_PARPORT_1284
+	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	return -ENODEV;
+#else
+	int mode = port->physport->ieee1284.mode;
+	int addr = mode & IEEE1284_ADDR;
+	size_t (*fn) (struct parport *, void *, size_t, int);
+
+	/* Ignore the device-ID-request bit and the address bit. */
+	mode &= ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
+
+	/* Use the mode we're in. */
+	switch (mode) {
+	case IEEE1284_MODE_COMPAT:
+		/* if we can tri-state use BYTE mode instead of NIBBLE mode,
+		 * if that fails, revert to NIBBLE mode -- ought to store somewhere
+		 * the device's ability to do BYTE mode reverse transfers, so we don't
+		 * end up needlessly calling negotiate(BYTE) repeately..  (fb)
+		 */
+		if ((port->physport->modes & PARPORT_MODE_TRISTATE) &&
+		    !parport_negotiate (port, IEEE1284_MODE_BYTE)) {
+			/* got into BYTE mode OK */
+			DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+			fn = port->ops->byte_read_data;
+			break;
+		}
+		if (parport_negotiate (port, IEEE1284_MODE_NIBBLE)) {
+			return -EIO;
+		}
+		/* fall through to NIBBLE */
+	case IEEE1284_MODE_NIBBLE:
+		DPRINTK (KERN_DEBUG "%s: Using nibble mode\n", port->name);
+		fn = port->ops->nibble_read_data;
+		break;
+
+	case IEEE1284_MODE_BYTE:
+		DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+		fn = port->ops->byte_read_data;
+		break;
+
+	case IEEE1284_MODE_EPP:
+		DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+		if (addr) {
+			fn = port->ops->epp_read_addr;
+		} else {
+			fn = port->ops->epp_read_data;
+		}
+		break;
+	case IEEE1284_MODE_EPPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
+			port->name);
+		if (addr) {
+			fn = parport_ieee1284_epp_read_addr;
+		} else {
+			fn = parport_ieee1284_epp_read_data;
+		}
+		break;
+	case IEEE1284_MODE_ECP:
+	case IEEE1284_MODE_ECPRLE:
+		DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+		fn = port->ops->ecp_read_data;
+		break;
+
+	case IEEE1284_MODE_ECPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
+			 port->name);
+		fn = parport_ieee1284_ecp_read_data;
+		break;
+
+	default:
+		DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
+			 port->physport->ieee1284.mode);
+		return -ENOSYS;
+	}
+
+	return (*fn) (port, buffer, len, 0);
+#endif /* IEEE1284 support */
+}
+
+/**
+ *	parport_set_timeout - set the inactivity timeout for a device
+ *	@dev: device on a port
+ *	@inactivity: inactivity timeout (in jiffies)
+ *
+ *	This sets the inactivity timeout for a particular device on a
+ *	port.  This affects functions like parport_wait_peripheral().
+ *	The special value 0 means not to call schedule() while dealing
+ *	with this device.
+ *
+ *	The return value is the previous inactivity timeout.
+ *
+ *	Any callers of parport_wait_event() for this device are woken
+ *	up.
+ */
+
+long parport_set_timeout (struct pardevice *dev, long inactivity)
+{
+	long int old = dev->timeout;
+
+	dev->timeout = inactivity;
+
+	if (dev->port->physport->cad == dev)
+		parport_ieee1284_wakeup (dev->port);
+
+	return old;
+}
+
+/* Exported symbols for modules. */
+
+EXPORT_SYMBOL(parport_negotiate);
+EXPORT_SYMBOL(parport_write);
+EXPORT_SYMBOL(parport_read);
+EXPORT_SYMBOL(parport_wait_peripheral);
+EXPORT_SYMBOL(parport_wait_event);
+EXPORT_SYMBOL(parport_set_timeout);
+EXPORT_SYMBOL(parport_ieee1284_interrupt);
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
new file mode 100644
index 000000000000..6624278c6ed8
--- /dev/null
+++ b/drivers/parport/ieee1284_ops.c
@@ -0,0 +1,921 @@
+/* IEEE-1284 operations for parport.
+ *
+ * This file is for generic IEEE 1284 operations.  The idea is that
+ * they are used by the low-level drivers.  If they have a special way
+ * of doing something, they can provide their own routines (and put
+ * the function pointers in port->ops); if not, they can just use these
+ * as a fallback.
+ *
+ * Note: Make no assumptions about hardware or architecture in this file!
+ *
+ * Author: Tim Waugh <tim@cyberelk.demon.co.uk>
+ * Fixed AUTOFD polarity in ecp_forward_to_reverse().  Fred Barnes, 1999
+ * Software emulated EPP fixes, Fred Barnes, 04/2001.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG /* undef me for production */
+
+#ifdef CONFIG_LP_CONSOLE
+#undef DEBUG /* Don't want a garbled console */
+#endif
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk (stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+/***                                *
+ * One-way data transfer functions. *
+ *                                ***/
+
+/* Compatibility mode. */
+size_t parport_ieee1284_write_compat (struct parport *port,
+				      const void *buffer, size_t len,
+				      int flags)
+{
+	int no_irq = 1;
+	ssize_t count = 0;
+	const unsigned char *addr = buffer;
+	unsigned char byte;
+	struct pardevice *dev = port->physport->cad;
+	unsigned char ctl = (PARPORT_CONTROL_SELECT
+			     | PARPORT_CONTROL_INIT);
+
+	if (port->irq != PARPORT_IRQ_NONE) {
+		parport_enable_irq (port);
+		no_irq = 0;
+	}
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+	parport_write_control (port, ctl);
+	parport_data_forward (port);
+	while (count < len) {
+		unsigned long expire = jiffies + dev->timeout;
+		long wait = (HZ + 99) / 100;
+		unsigned char mask = (PARPORT_STATUS_ERROR
+				      | PARPORT_STATUS_BUSY);
+		unsigned char val = (PARPORT_STATUS_ERROR
+				     | PARPORT_STATUS_BUSY);
+
+		/* Wait until the peripheral's ready */
+		do {
+			/* Is the peripheral ready yet? */
+			if (!parport_wait_peripheral (port, mask, val))
+				/* Skip the loop */
+				goto ready;
+
+			/* Is the peripheral upset? */
+			if ((parport_read_status (port) &
+			     (PARPORT_STATUS_PAPEROUT |
+			      PARPORT_STATUS_SELECT |
+			      PARPORT_STATUS_ERROR))
+			    != (PARPORT_STATUS_SELECT |
+				PARPORT_STATUS_ERROR))
+				/* If nFault is asserted (i.e. no
+				 * error) and PAPEROUT and SELECT are
+				 * just red herrings, give the driver
+				 * a chance to check it's happy with
+				 * that before continuing. */
+				goto stop;
+
+			/* Have we run out of time? */
+			if (!time_before (jiffies, expire))
+				break;
+
+			/* Yield the port for a while.  If this is the
+                           first time around the loop, don't let go of
+                           the port.  This way, we find out if we have
+                           our interrupt handler called. */
+			if (count && no_irq) {
+				parport_release (dev);
+				__set_current_state (TASK_INTERRUPTIBLE);
+				schedule_timeout (wait);
+				parport_claim_or_block (dev);
+			}
+			else
+				/* We must have the device claimed here */
+				parport_wait_event (port, wait);
+
+			/* Is there a signal pending? */
+			if (signal_pending (current))
+				break;
+
+			/* Wait longer next time. */
+			wait *= 2;
+		} while (time_before (jiffies, expire));
+
+		if (signal_pending (current))
+			break;
+
+		DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name);
+		break;
+
+	ready:
+		/* Write the character to the data lines. */
+		byte = *addr++;
+		parport_write_data (port, byte);
+		udelay (1);
+
+		/* Pulse strobe. */
+		parport_write_control (port, ctl | PARPORT_CONTROL_STROBE);
+		udelay (1); /* strobe */
+
+		parport_write_control (port, ctl);
+		udelay (1); /* hold */
+
+		/* Assume the peripheral received it. */
+		count++;
+
+                /* Let another process run if it needs to. */
+		if (time_before (jiffies, expire))
+			if (!parport_yield_blocking (dev)
+			    && need_resched())
+				schedule ();
+	}
+ stop:
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return count;
+}
+
+/* Nibble mode. */
+size_t parport_ieee1284_read_nibble (struct parport *port, 
+				     void *buffer, size_t len,
+				     int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	unsigned char *buf = buffer;
+	int i;
+	unsigned char byte = 0;
+
+	len *= 2; /* in nibbles */
+	for (i=0; i < len; i++) {
+		unsigned char nibble;
+
+		/* Does the error line indicate end of data? */
+		if (((i & 1) == 0) &&
+		    (parport_read_status(port) & PARPORT_STATUS_ERROR)) {
+			port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+			DPRINTK (KERN_DEBUG
+				"%s: No more nibble data (%d bytes)\n",
+				port->name, i/2);
+
+			/* Go to reverse idle phase. */
+			parport_frob_control (port,
+					      PARPORT_CONTROL_AUTOFD,
+					      PARPORT_CONTROL_AUTOFD);
+			port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+			break;
+		}
+
+		/* Event 7: Set nAutoFd low. */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 9: nAck goes low. */
+		port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK, 0)) {
+			/* Timeout -- no more data? */
+			DPRINTK (KERN_DEBUG
+				 "%s: Nibble timeout at event 9 (%d bytes)\n",
+				 port->name, i/2);
+			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+			break;
+		}
+
+
+		/* Read a nibble. */
+		nibble = parport_read_status (port) >> 3;
+		nibble &= ~8;
+		if ((nibble & 0x10) == 0)
+			nibble |= 8;
+		nibble &= 0xf;
+
+		/* Event 10: Set nAutoFd high. */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 11: nAck goes high. */
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* Timeout -- no more data? */
+			DPRINTK (KERN_DEBUG
+				 "%s: Nibble timeout at event 11\n",
+				 port->name);
+			break;
+		}
+
+		if (i & 1) {
+			/* Second nibble */
+			byte |= nibble << 4;
+			*buf++ = byte;
+		} else 
+			byte = nibble;
+	}
+
+	i /= 2; /* i is now in bytes */
+
+	if (i == len) {
+		/* Read the last nibble without checking data avail. */
+		port = port->physport;
+		if (parport_read_status (port) & PARPORT_STATUS_ERROR)
+			port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+		else
+			port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+	}
+
+	return i;
+#endif /* IEEE1284 support */
+}
+
+/* Byte mode. */
+size_t parport_ieee1284_read_byte (struct parport *port,
+				   void *buffer, size_t len,
+				   int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	unsigned char *buf = buffer;
+	ssize_t count = 0;
+
+	for (count = 0; count < len; count++) {
+		unsigned char byte;
+
+		/* Data available? */
+		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+			port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+			DPRINTK (KERN_DEBUG
+				 "%s: No more byte data (%Zd bytes)\n",
+				 port->name, count);
+
+			/* Go to reverse idle phase. */
+			parport_frob_control (port,
+					      PARPORT_CONTROL_AUTOFD,
+					      PARPORT_CONTROL_AUTOFD);
+			port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+			break;
+		}
+
+		/* Event 14: Place data bus in high impedance state. */
+		parport_data_reverse (port);
+
+		/* Event 7: Set nAutoFd low. */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 9: nAck goes low. */
+		port->physport->ieee1284.phase = IEEE1284_PH_REV_DATA;
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     0)) {
+			/* Timeout -- no more data? */
+			parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+						 0);
+			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n",
+				 port->name);
+			break;
+		}
+
+		byte = parport_read_data (port);
+		*buf++ = byte;
+
+		/* Event 10: Set nAutoFd high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 11: nAck goes high. */
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* Timeout -- no more data? */
+			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n",
+				 port->name);
+			break;
+		}
+
+		/* Event 16: Set nStrobe low. */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (5);
+
+		/* Event 17: Set nStrobe high. */
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+	}
+
+	if (count == len) {
+		/* Read the last byte without checking data avail. */
+		port = port->physport;
+		if (parport_read_status (port) & PARPORT_STATUS_ERROR)
+			port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+		else
+			port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+	}
+
+	return count;
+#endif /* IEEE1284 support */
+}
+
+/***              *
+ * ECP Functions. *
+ *              ***/
+
+#ifdef CONFIG_PARPORT_1284
+
+static inline
+int ecp_forward_to_reverse (struct parport *port)
+{
+	int retval;
+
+	/* Event 38: Set nAutoFd low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_AUTOFD,
+			      PARPORT_CONTROL_AUTOFD);
+	parport_data_reverse (port);
+	udelay (5);
+
+	/* Event 39: Set nInit low to initiate bus reversal */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_INIT,
+			      0);
+
+	/* Event 40: PError goes low */
+	retval = parport_wait_peripheral (port,
+					  PARPORT_STATUS_PAPEROUT, 0);
+
+	if (!retval) {
+		DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+	} else {
+		DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+	}
+
+	return retval;
+}
+
+static inline
+int ecp_reverse_to_forward (struct parport *port)
+{
+	int retval;
+
+	/* Event 47: Set nInit high */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_INIT
+			      | PARPORT_CONTROL_AUTOFD,
+			      PARPORT_CONTROL_INIT
+			      | PARPORT_CONTROL_AUTOFD);
+
+	/* Event 49: PError goes high */
+	retval = parport_wait_peripheral (port,
+					  PARPORT_STATUS_PAPEROUT,
+					  PARPORT_STATUS_PAPEROUT);
+
+	if (!retval) {
+		parport_data_forward (port);
+		DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+	} else {
+		DPRINTK (KERN_DEBUG
+			 "%s: ECP direction: failed to switch forward\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+	}
+
+
+	return retval;
+}
+
+#endif /* IEEE1284 support */
+
+/* ECP mode, forward channel, data. */
+size_t parport_ieee1284_ecp_write_data (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	const unsigned char *buf = buffer;
+	size_t written;
+	int retry;
+
+	port = port->physport;
+
+	if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
+		if (ecp_reverse_to_forward (port))
+			return 0;
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* HostAck high (data, not command) */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_INIT);
+	for (written = 0; written < len; written++, buf++) {
+		unsigned long expire = jiffies + port->cad->timeout;
+		unsigned char byte;
+
+		byte = *buf;
+	try_again:
+		parport_write_data (port, byte);
+		parport_frob_control (port, PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (5);
+		for (retry = 0; retry < 100; retry++) {
+			if (!parport_wait_peripheral (port,
+						      PARPORT_STATUS_BUSY, 0))
+				goto success;
+
+			if (signal_pending (current)) {
+				parport_frob_control (port,
+						      PARPORT_CONTROL_STROBE,
+						      0);
+				break;
+			}
+		}
+
+		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
+		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_INIT);
+		udelay (50);
+		if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+			/* It's buggered. */
+			parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+			break;
+		}
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+		udelay (50);
+		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+			break;
+
+		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+			 port->name);
+
+		if (time_after_eq (jiffies, expire)) break;
+		goto try_again;
+	success:
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+		udelay (5);
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY))
+			/* Peripheral hasn't accepted the data. */
+			break;
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+#endif /* IEEE1284 support */
+}
+
+/* ECP mode, reverse channel, data. */
+size_t parport_ieee1284_ecp_read_data (struct parport *port,
+				       void *buffer, size_t len, int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	struct pardevice *dev = port->cad;
+	unsigned char *buf = buffer;
+	int rle_count = 0; /* shut gcc up */
+	unsigned char ctl;
+	int rle = 0;
+	ssize_t count = 0;
+
+	port = port->physport;
+
+	if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE)
+		if (ecp_forward_to_reverse (port))
+			return 0;
+
+	port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+
+	/* Set HostAck low to start accepting data. */
+	ctl = parport_read_control (port);
+	ctl &= ~(PARPORT_CONTROL_STROBE | PARPORT_CONTROL_INIT |
+		 PARPORT_CONTROL_AUTOFD);
+	parport_write_control (port,
+			       ctl | PARPORT_CONTROL_AUTOFD);
+	while (count < len) {
+		unsigned long expire = jiffies + dev->timeout;
+		unsigned char byte;
+		int command;
+
+		/* Event 43: Peripheral sets nAck low. It can take as
+                   long as it wants. */
+		while (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
+			/* The peripheral hasn't given us data in
+			   35ms.  If we have data to give back to the
+			   caller, do it now. */
+			if (count)
+				goto out;
+
+			/* If we've used up all the time we were allowed,
+			   give up altogether. */
+			if (!time_before (jiffies, expire))
+				goto out;
+
+			/* Yield the port for a while. */
+			if (count && dev->port->irq != PARPORT_IRQ_NONE) {
+				parport_release (dev);
+				__set_current_state (TASK_INTERRUPTIBLE);
+				schedule_timeout ((HZ + 24) / 25);
+				parport_claim_or_block (dev);
+			}
+			else
+				/* We must have the device claimed here. */
+				parport_wait_event (port, (HZ + 24) / 25);
+
+			/* Is there a signal pending? */
+			if (signal_pending (current))
+				goto out;
+		}
+
+		/* Is this a command? */
+		if (rle)
+			/* The last byte was a run-length count, so
+                           this can't be as well. */
+			command = 0;
+		else
+			command = (parport_read_status (port) &
+				   PARPORT_STATUS_BUSY) ? 1 : 0;
+
+		/* Read the data. */
+		byte = parport_read_data (port);
+
+		/* If this is a channel command, rather than an RLE
+                   command or a normal data byte, don't accept it. */
+		if (command) {
+			if (byte & 0x80) {
+				DPRINTK (KERN_DEBUG "%s: stopping short at "
+					 "channel command (%02x)\n",
+					 port->name, byte);
+				goto out;
+			}
+			else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE)
+				DPRINTK (KERN_DEBUG "%s: device illegally "
+					 "using RLE; accepting anyway\n",
+					 port->name);
+
+			rle_count = byte + 1;
+
+			/* Are we allowed to read that many bytes? */
+			if (rle_count > (len - count)) {
+				DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes "
+					 "for next time\n", port->name,
+					 rle_count);
+				break;
+			}
+
+			rle = 1;
+		}
+
+		/* Event 44: Set HostAck high, acknowledging handshake. */
+		parport_write_control (port, ctl);
+
+		/* Event 45: The peripheral has 35ms to set nAck high. */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* It's gone wrong.  Return what data we have
+                           to the caller. */
+			DPRINTK (KERN_DEBUG "ECP read timed out at 45\n");
+
+			if (command)
+				printk (KERN_WARNING
+					"%s: command ignored (%02x)\n",
+					port->name, byte);
+
+			break;
+		}
+
+		/* Event 46: Set HostAck low and accept the data. */
+		parport_write_control (port,
+				       ctl | PARPORT_CONTROL_AUTOFD);
+
+		/* If we just read a run-length count, fetch the data. */
+		if (command)
+			continue;
+
+		/* If this is the byte after a run-length count, decompress. */
+		if (rle) {
+			rle = 0;
+			memset (buf, byte, rle_count);
+			buf += rle_count;
+			count += rle_count;
+			DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n",
+				 port->name, rle_count);
+		} else {
+			/* Normal data byte. */
+			*buf = byte;
+			buf++, count++;
+		}
+	}
+
+ out:
+	port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+	return count;
+#endif /* IEEE1284 support */
+}
+
+/* ECP mode, forward channel, commands. */
+size_t parport_ieee1284_ecp_write_addr (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	const unsigned char *buf = buffer;
+	size_t written;
+	int retry;
+
+	port = port->physport;
+
+	if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
+		if (ecp_reverse_to_forward (port))
+			return 0;
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* HostAck low (command, not data) */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_INIT);
+	for (written = 0; written < len; written++, buf++) {
+		unsigned long expire = jiffies + port->cad->timeout;
+		unsigned char byte;
+
+		byte = *buf;
+	try_again:
+		parport_write_data (port, byte);
+		parport_frob_control (port, PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (5);
+		for (retry = 0; retry < 100; retry++) {
+			if (!parport_wait_peripheral (port,
+						      PARPORT_STATUS_BUSY, 0))
+				goto success;
+
+			if (signal_pending (current)) {
+				parport_frob_control (port,
+						      PARPORT_CONTROL_STROBE,
+						      0);
+				break;
+			}
+		}
+
+		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
+		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_INIT);
+		udelay (50);
+		if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+			/* It's buggered. */
+			parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+			break;
+		}
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+		udelay (50);
+		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+			break;
+
+		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+			 port->name);
+
+		if (time_after_eq (jiffies, expire)) break;
+		goto try_again;
+	success:
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+		udelay (5);
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY))
+			/* Peripheral hasn't accepted the data. */
+			break;
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+#endif /* IEEE1284 support */
+}
+
+/***              *
+ * EPP functions. *
+ *              ***/
+
+/* EPP mode, forward channel, data. */
+size_t parport_ieee1284_epp_write_data (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	size_t ret = 0;
+
+	/* set EPP idle state (just to make sure) with strobe low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_forward (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 62: Write data and set autofd low */
+		parport_write_data (port, *bp);
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 58: wait for busy (nWait) to go high */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+			break;
+
+		/* Event 63: set nAutoFd (nDStrb) high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 60: wait for busy (nWait) to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY, 5))
+			break;
+
+		ret++;
+	}
+
+	/* Event 61: set strobe (nWrite) high */
+	parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+
+	return ret;
+}
+
+/* EPP mode, reverse channel, data. */
+size_t parport_ieee1284_epp_read_data (struct parport *port,
+				       void *buffer, size_t len,
+				       int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	unsigned ret = 0;
+
+	/* set EPP idle state (just to make sure) with strobe high */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_reverse (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 67: set nAutoFd (nDStrb) low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+		/* Event 58: wait for Busy to go high */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+			break;
+		}
+
+		*bp = parport_read_data (port);
+
+		/* Event 63: set nAutoFd (nDStrb) high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 60: wait for Busy to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY, 5)) {
+			break;
+		}
+
+		ret++;
+	}
+	port->ops->data_forward (port);
+
+	return ret;
+}
+
+/* EPP mode, forward channel, addresses. */
+size_t parport_ieee1284_epp_write_addr (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	size_t ret = 0;
+
+	/* set EPP idle state (just to make sure) with strobe low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_forward (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 56: Write data and set nAStrb low. */
+		parport_write_data (port, *bp);
+		parport_frob_control (port, PARPORT_CONTROL_SELECT,
+				      PARPORT_CONTROL_SELECT);
+
+		/* Event 58: wait for busy (nWait) to go high */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+			break;
+
+		/* Event 59: set nAStrb high */
+		parport_frob_control (port, PARPORT_CONTROL_SELECT, 0);
+
+		/* Event 60: wait for busy (nWait) to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY, 5))
+			break;
+
+		ret++;
+	}
+
+	/* Event 61: set strobe (nWrite) high */
+	parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+
+	return ret;
+}
+
+/* EPP mode, reverse channel, addresses. */
+size_t parport_ieee1284_epp_read_addr (struct parport *port,
+				       void *buffer, size_t len,
+				       int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	unsigned ret = 0;
+
+	/* Set EPP idle state (just to make sure) with strobe high */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_reverse (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 64: set nSelectIn (nAStrb) low */
+		parport_frob_control (port, PARPORT_CONTROL_SELECT,
+				      PARPORT_CONTROL_SELECT);
+
+		/* Event 58: wait for Busy to go high */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+			break;
+		}
+
+		*bp = parport_read_data (port);
+
+		/* Event 59: set nSelectIn (nAStrb) high */
+		parport_frob_control (port, PARPORT_CONTROL_SELECT,
+				      PARPORT_CONTROL_SELECT);
+
+		/* Event 60: wait for Busy to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 
+					     PARPORT_STATUS_BUSY, 5))
+			break;
+
+		ret++;
+	}
+	port->ops->data_forward (port);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(parport_ieee1284_ecp_write_data);
+EXPORT_SYMBOL(parport_ieee1284_ecp_read_data);
+EXPORT_SYMBOL(parport_ieee1284_ecp_write_addr);
+EXPORT_SYMBOL(parport_ieee1284_write_compat);
+EXPORT_SYMBOL(parport_ieee1284_read_nibble);
+EXPORT_SYMBOL(parport_ieee1284_read_byte);
+EXPORT_SYMBOL(parport_ieee1284_epp_write_data);
+EXPORT_SYMBOL(parport_ieee1284_epp_read_data);
+EXPORT_SYMBOL(parport_ieee1284_epp_write_addr);
+EXPORT_SYMBOL(parport_ieee1284_epp_read_addr);
diff --git a/drivers/parport/multiface.h b/drivers/parport/multiface.h
new file mode 100644
index 000000000000..56769dd5d315
--- /dev/null
+++ b/drivers/parport/multiface.h
@@ -0,0 +1,20 @@
+#ifndef _MULTIFACE_H_
+#define _MULTIFACE_H_
+
+/*
+ * Defines for SerialMaster, Multiface Card II and Multiface Card III
+ * The addresses given below are offsets to the board base address
+ * 
+ * 6.11.95 Joerg Dorchain (dorchain@mpi-sb.mpg.de)
+ *
+ */
+
+#define PIA_REG_PADWIDTH 255
+
+#define DUARTBASE 0x0000
+#define PITBASE   0x0100
+#define ROMBASE   0x0200
+#define PIABASE   0x4000
+
+#endif
+
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
new file mode 100644
index 000000000000..5126e74ac2ec
--- /dev/null
+++ b/drivers/parport/parport_amiga.c
@@ -0,0 +1,293 @@
+/* Low-level parallel port routines for the Amiga built-in port
+ *
+ * Author: Joerg Dorchain <joerg@dorchain.net>
+ *
+ * This is a complete rewrite of the code, but based heaviy upon the old
+ * lp_intern. code.
+ *
+ * The built-in Amiga parallel port provides one port at a fixed address
+ * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
+ * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
+ * in hardware when the data register is accessed), and 1 input control line
+ * /ACK, able to cause an interrupt, but both not directly settable by
+ * software.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <asm/setup.h>
+#include <asm/amigahw.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/amigaints.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+#define DPRINTK(x...)	do { } while (0)
+#endif
+
+static struct parport *this_port = NULL;
+
+static void amiga_write_data(struct parport *p, unsigned char data)
+{
+	DPRINTK(KERN_DEBUG "write_data %c\n",data);
+	/* Triggers also /STROBE. This behavior cannot be changed */
+	ciaa.prb = data;
+	mb();
+}
+
+static unsigned char amiga_read_data(struct parport *p)
+{
+	/* Triggers also /STROBE. This behavior cannot be changed */
+	return ciaa.prb;
+}
+
+#if 0
+static unsigned char control_pc_to_amiga(unsigned char control)
+{
+	unsigned char ret = 0;
+
+	if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
+		;
+	if (control & PARPORT_CONTROL_INIT) /* INITP */
+		/* reset connected to cpu reset pin */;
+	if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
+		/* Not connected */;
+	if (control & PARPORT_CONTROL_STROBE) /* Strobe */
+		/* Handled only directly by hardware */;
+	return ret;
+}
+#endif
+
+static unsigned char control_amiga_to_pc(unsigned char control)
+{
+	return PARPORT_CONTROL_SELECT |
+	      PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
+	/* fake value: interrupt enable, select in, no reset,
+	no autolf, no strobe - seems to be closest the wiring diagram */
+}
+
+static void amiga_write_control(struct parport *p, unsigned char control)
+{
+	DPRINTK(KERN_DEBUG "write_control %02x\n",control);
+	/* No implementation possible */
+}
+	
+static unsigned char amiga_read_control( struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "read_control \n");
+	return control_amiga_to_pc(0);
+}
+
+static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
+{
+	unsigned char old;
+
+	DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
+	old = amiga_read_control(p);
+	amiga_write_control(p, (old & ~mask) ^ val);
+	return old;
+}
+
+#if 0 /* currently unused */
+static unsigned char status_pc_to_amiga(unsigned char status)
+{
+	unsigned char ret = 1;
+
+	if (status & PARPORT_STATUS_BUSY) /* Busy */
+		ret &= ~1;
+	if (status & PARPORT_STATUS_ACK) /* Ack */
+		/* handled in hardware */;
+	if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
+		ret |= 2;
+	if (status & PARPORT_STATUS_SELECT) /* select */
+		ret |= 4;
+	if (status & PARPORT_STATUS_ERROR) /* error */
+		/* not connected */;
+	return ret;
+}
+#endif
+
+static unsigned char status_amiga_to_pc(unsigned char status)
+{
+	unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
+
+	if (status & 1) /* Busy */
+		ret &= ~PARPORT_STATUS_BUSY;
+	if (status & 2) /* PaperOut */
+		ret |= PARPORT_STATUS_PAPEROUT;
+	if (status & 4) /* Selected */
+		ret |= PARPORT_STATUS_SELECT;
+	/* the rest is not connected or handled autonomously in hardware */
+
+	return ret;
+}
+
+static unsigned char amiga_read_status(struct parport *p)
+{
+	unsigned char status;
+
+	status = status_amiga_to_pc(ciab.pra & 7);
+	DPRINTK(KERN_DEBUG "read_status %02x\n", status);
+	return status;
+}
+
+/* as this ports irq handling is already done, we use a generic funktion */
+static irqreturn_t amiga_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	parport_generic_irq(irq, (struct parport *) dev_id, regs);
+	return IRQ_HANDLED;
+}
+
+static void amiga_enable_irq(struct parport *p)
+{
+	enable_irq(IRQ_AMIGA_CIAA_FLG);
+}
+
+static void amiga_disable_irq(struct parport *p)
+{
+	disable_irq(IRQ_AMIGA_CIAA_FLG);
+}
+
+static void amiga_data_forward(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "forward\n");
+	ciaa.ddrb = 0xff; /* all pins output */
+	mb();
+}
+
+static void amiga_data_reverse(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "reverse\n");
+	ciaa.ddrb = 0; /* all pins input */
+	mb();
+}
+
+static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.amiga.data = 0;
+	s->u.amiga.datadir = 255;
+	s->u.amiga.status = 0;
+	s->u.amiga.statusdir = 0;
+}
+
+static void amiga_save_state(struct parport *p, struct parport_state *s)
+{
+	mb();
+	s->u.amiga.data = ciaa.prb;
+	s->u.amiga.datadir = ciaa.ddrb;
+	s->u.amiga.status = ciab.pra & 7;
+	s->u.amiga.statusdir = ciab.ddra & 7;
+	mb();
+}
+
+static void amiga_restore_state(struct parport *p, struct parport_state *s)
+{
+	mb();
+	ciaa.prb = s->u.amiga.data;
+	ciaa.ddrb = s->u.amiga.datadir;
+	ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
+	ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
+	mb();
+}
+
+static struct parport_operations pp_amiga_ops = {
+	.write_data	= amiga_write_data,
+	.read_data	= amiga_read_data,
+
+	.write_control	= amiga_write_control,
+	.read_control	= amiga_read_control,
+	.frob_control	= amiga_frob_control,
+
+	.read_status	= amiga_read_status,
+
+	.enable_irq	= amiga_enable_irq,
+	.disable_irq	= amiga_disable_irq,
+
+	.data_forward	= amiga_data_forward,
+	.data_reverse	= amiga_data_reverse,
+
+	.init_state	= amiga_init_state,
+	.save_state	= amiga_save_state,
+	.restore_state	= amiga_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* ----------- Initialisation code --------------------------------- */
+
+static int __init parport_amiga_init(void)
+{
+	struct parport *p;
+	int err;
+
+	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_PARALLEL))
+		return -ENODEV;
+
+	err = -EBUSY;
+	if (!request_mem_region(CIAA_PHYSADDR-1+0x100, 0x100, "parallel"))
+		goto out_mem;
+
+	ciaa.ddrb = 0xff;
+	ciab.ddra &= 0xf8;
+	mb();
+
+	p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
+				   PARPORT_DMA_NONE, &pp_amiga_ops);
+	if (!p)
+		goto out_port;
+
+	err = request_irq(IRQ_AMIGA_CIAA_FLG, amiga_interrupt, 0, p->name, p);
+	if (err)
+		goto out_irq;
+
+	this_port = p;
+	printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
+	/* XXX: set operating mode */
+	parport_announce_port(p);
+
+	return 0;
+
+out_irq:
+	parport_put_port(p);
+out_port:
+	release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
+out_mem:
+	return err;
+}
+
+static void __exit parport_amiga_exit(void)
+{
+	parport_remove_port(this_port);
+	if (this_port->irq != PARPORT_IRQ_NONE)
+		free_irq(IRQ_AMIGA_CIAA_FLG, this_port);
+	parport_put_port(this_port);
+	release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
+}
+
+
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
+MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_amiga_init)
+module_exit(parport_amiga_exit)
diff --git a/drivers/parport/parport_arc.c b/drivers/parport/parport_arc.c
new file mode 100644
index 000000000000..b35bb4f48d62
--- /dev/null
+++ b/drivers/parport/parport_arc.c
@@ -0,0 +1,139 @@
+/* Low-level parallel port routines for Archimedes onboard hardware
+ *
+ * Author: Phil Blundell <philb@gnu.org>
+ */
+
+/* This driver is for the parallel port hardware found on Acorn's old
+ * range of Archimedes machines.  The A5000 and newer systems have PC-style
+ * I/O hardware and should use the parport_pc driver instead.
+ *
+ * The Acorn printer port hardware is very simple.  There is a single 8-bit
+ * write-only latch for the data port and control/status bits are handled
+ * with various auxilliary input and output lines.  The port is not
+ * bidirectional, does not support any modes other than SPP, and has only
+ * a subset of the standard printer control lines connected.
+ */
+
+#include <linux/threads.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/parport.h>
+
+#include <asm/ptrace.h>
+#include <asm/io.h>
+#include <asm/arch/oldlatches.h>
+#include <asm/arch/irqs.h>
+
+#define DATA_ADDRESS    0x3350010
+
+/* This is equivalent to the above and only used for request_region. */
+#define PORT_BASE       0x80000000 | ((DATA_ADDRESS - IO_BASE) >> 2)
+
+/* The hardware can't read from the data latch, so we must use a soft
+   copy. */
+static unsigned char data_copy;
+
+/* These are pretty simple. We know the irq is never shared and the
+   kernel does all the magic that's required. */
+static void arc_enable_irq(struct parport *p)
+{
+	enable_irq(p->irq);
+}
+
+static void arc_disable_irq(struct parport *p)
+{
+	disable_irq(p->irq);
+}
+
+static void arc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	parport_generic_irq(irq, (struct parport *) dev_id, regs);
+}
+
+static void arc_write_data(struct parport *p, unsigned char data)
+{
+	data_copy = data;
+	outb_t(data, DATA_LATCH);
+}
+
+static unsigned char arc_read_data(struct parport *p)
+{
+	return data_copy;
+}
+
+static struct parport_operations parport_arc_ops = 
+{
+	.write_data	= arc_write_data,
+	.read_data	= arc_read_data,
+
+	.write_control	= arc_write_control,
+	.read_control	= arc_read_control,
+	.frob_control	= arc_frob_control,
+
+	.read_status	= arc_read_status,
+
+	.enable_irq	= arc_enable_irq,
+	.disable_irq	= arc_disable_irq,
+
+	.data_forward	= arc_data_forward,
+	.data_reverse	= arc_data_reverse,
+
+	.init_state	= arc_init_state,
+	.save_state	= arc_save_state,
+	.restore_state	= arc_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+	
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* --- Initialisation code -------------------------------- */
+
+static int parport_arc_init(void)
+{
+	/* Archimedes hardware provides only one port, at a fixed address */
+	struct parport *p;
+	struct resource res;
+	char *fake_name = "parport probe");
+
+	res = request_region(PORT_BASE, 1, fake_name);
+	if (res == NULL)
+		return 0;
+
+	p = parport_register_port (PORT_BASE, IRQ_PRINTERACK,
+				   PARPORT_DMA_NONE, &parport_arc_ops);
+
+	if (!p) {
+		release_region(PORT_BASE, 1);
+		return 0;
+	}
+
+	p->modes = PARPORT_MODE_ARCSPP;
+	p->size = 1;
+	rename_region(res, p->name);
+
+	printk(KERN_INFO "%s: Archimedes on-board port, using irq %d\n",
+	       p->irq);
+
+	/* Tell the high-level drivers about the port. */
+	parport_announce_port (p);
+
+	return 1;
+}
+
+module_init(parport_arc_init)
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
new file mode 100644
index 000000000000..78c3f34108bc
--- /dev/null
+++ b/drivers/parport/parport_atari.c
@@ -0,0 +1,240 @@
+/* Low-level parallel port routines for the Atari builtin port
+ *
+ * Author: Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+ *
+ * Based on parport_amiga.c.
+ *
+ * The built-in Atari parallel port provides one port at a fixed address
+ * with 8 output data lines (D0 - D7), 1 output control line (STROBE)
+ * and 1 input status line (BUSY) able to cause an interrupt.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/interrupt.h>
+#include <asm/setup.h>
+#include <asm/atarihw.h>
+#include <asm/irq.h>
+#include <asm/atariints.h>
+
+static struct parport *this_port = NULL;
+
+static unsigned char
+parport_atari_read_data(struct parport *p)
+{
+	unsigned long flags;
+	unsigned char data;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 15;
+	data = sound_ym.rd_data_reg_sel;
+	local_irq_restore(flags);
+	return data;
+}
+
+static void
+parport_atari_write_data(struct parport *p, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 15;
+	sound_ym.wd_data = data;
+	local_irq_restore(flags);
+}
+
+static unsigned char
+parport_atari_read_control(struct parport *p)
+{
+	unsigned long flags;
+	unsigned char control = 0;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 14;
+	if (!(sound_ym.rd_data_reg_sel & (1 << 5)))
+		control = PARPORT_CONTROL_STROBE;
+	local_irq_restore(flags);
+	return control;
+}
+
+static void
+parport_atari_write_control(struct parport *p, unsigned char control)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 14;
+	if (control & PARPORT_CONTROL_STROBE)
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~(1 << 5);
+	else
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
+	local_irq_restore(flags);
+}
+
+static unsigned char
+parport_atari_frob_control(struct parport *p, unsigned char mask,
+			   unsigned char val)
+{
+	unsigned char old = parport_atari_read_control(p);
+	parport_atari_write_control(p, (old & ~mask) ^ val);
+	return old;
+}
+
+static unsigned char
+parport_atari_read_status(struct parport *p)
+{
+	return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
+		PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR);
+}
+
+static void
+parport_atari_init_state(struct pardevice *d, struct parport_state *s)
+{
+}
+
+static void
+parport_atari_save_state(struct parport *p, struct parport_state *s)
+{
+}
+
+static void
+parport_atari_restore_state(struct parport *p, struct parport_state *s)
+{
+}
+
+static irqreturn_t
+parport_atari_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	parport_generic_irq(irq, (struct parport *) dev_id, regs);
+	return IRQ_HANDLED;
+}
+
+static void
+parport_atari_enable_irq(struct parport *p)
+{
+	enable_irq(IRQ_MFP_BUSY);
+}
+
+static void
+parport_atari_disable_irq(struct parport *p)
+{
+	disable_irq(IRQ_MFP_BUSY);
+}
+
+static void
+parport_atari_data_forward(struct parport *p)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* Soundchip port B as output. */
+	sound_ym.rd_data_reg_sel = 7;
+	sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x40;
+	local_irq_restore(flags);
+}
+
+static void
+parport_atari_data_reverse(struct parport *p)
+{
+#if 0 /* too dangerous, can kill sound chip */
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* Soundchip port B as input. */
+	sound_ym.rd_data_reg_sel = 7;
+	sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~0x40;
+	local_irq_restore(flags);
+#endif
+}
+
+static struct parport_operations parport_atari_ops = {
+	.write_data	= parport_atari_write_data,
+	.read_data	= parport_atari_read_data,
+
+	.write_control	= parport_atari_write_control,
+	.read_control	= parport_atari_read_control,
+	.frob_control	= parport_atari_frob_control,
+
+	.read_status	= parport_atari_read_status,
+
+	.enable_irq	= parport_atari_enable_irq,
+	.disable_irq	= parport_atari_disable_irq,
+
+	.data_forward	= parport_atari_data_forward,
+	.data_reverse	= parport_atari_data_reverse,
+
+	.init_state	= parport_atari_init_state,
+	.save_state	= parport_atari_save_state,
+	.restore_state	= parport_atari_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init parport_atari_init(void)
+{
+	struct parport *p;
+	unsigned long flags;
+
+	if (MACH_IS_ATARI) {
+		local_irq_save(flags);
+		/* Soundchip port A/B as output. */
+		sound_ym.rd_data_reg_sel = 7;
+		sound_ym.wd_data = (sound_ym.rd_data_reg_sel & 0x3f) | 0xc0;
+		/* STROBE high. */
+		sound_ym.rd_data_reg_sel = 14;
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
+		local_irq_restore(flags);
+		/* MFP port I0 as input. */
+		mfp.data_dir &= ~1;
+		/* MFP port I0 interrupt on high->low edge. */
+		mfp.active_edge &= ~1;
+		p = parport_register_port((unsigned long)&sound_ym.wd_data,
+					  IRQ_MFP_BUSY, PARPORT_DMA_NONE,
+					  &parport_atari_ops);
+		if (!p)
+			return -ENODEV;
+		if (request_irq(IRQ_MFP_BUSY, parport_atari_interrupt,
+				IRQ_TYPE_SLOW, p->name, p)) {
+			parport_put_port (p);
+			return -ENODEV;
+		}
+
+		this_port = p;
+		printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name);
+		parport_announce_port (p);
+
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static void __exit parport_atari_exit(void)
+{
+	parport_remove_port(this_port);
+	if (this_port->irq != PARPORT_IRQ_NONE)
+		free_irq(IRQ_MFP_BUSY, this_port);
+	parport_put_port(this_port);
+}
+
+MODULE_AUTHOR("Andreas Schwab");
+MODULE_DESCRIPTION("Parport Driver for Atari builtin Port");
+MODULE_SUPPORTED_DEVICE("Atari builtin Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_atari_init)
+module_exit(parport_atari_exit)
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
new file mode 100644
index 000000000000..a3fa8185af2a
--- /dev/null
+++ b/drivers/parport/parport_cs.c
@@ -0,0 +1,397 @@
+/*======================================================================
+
+    A driver for PCMCIA parallel port adapters
+
+    (specifically, for the Quatech SPP-100 EPP card: other cards will
+    probably require driver tweaks)
+    
+    parport_cs.c 1.29 2002/10/11 06:57:41
+
+    The contents of this file are subject to the Mozilla Public
+    License Version 1.1 (the "License"); you may not use this file
+    except in compliance with the License. You may obtain a copy of
+    the License at http://www.mozilla.org/MPL/
+
+    Software distributed under the License is distributed on an "AS
+    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+    implied. See the License for the specific language governing
+    rights and limitations under the License.
+
+    The initial developer of the original code is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+
+    Alternatively, the contents of this file may be used under the
+    terms of the GNU General Public License version 2 (the "GPL"), in
+    which case the provisions of the GPL are applicable instead of the
+    above.  If you wish to allow the use of your version of this file
+    only under the terms of the GPL and not to allow others to use
+    your version of this file under the MPL, indicate your decision
+    by deleting the provisions above and replace them with the notice
+    and other provisions required by the GPL.  If you do not delete
+    the provisions above, a recipient may use your version of this
+    file under either the MPL or the GPL.
+    
+======================================================================*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("PCMCIA parallel port card driver");
+MODULE_LICENSE("Dual MPL/GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+INT_MODULE_PARM(epp_mode, 1);
+
+#ifdef PCMCIA_DEBUG
+INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+static char *version =
+"parport_cs.c 1.29 2002/10/11 06:57:41 (David Hinds)";
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+#define FORCE_EPP_MODE	0x08
+
+typedef struct parport_info_t {
+    dev_link_t		link;
+    int			ndev;
+    dev_node_t		node;
+    struct parport	*port;
+} parport_info_t;
+
+static dev_link_t *parport_attach(void);
+static void parport_detach(dev_link_t *);
+static void parport_config(dev_link_t *link);
+static void parport_cs_release(dev_link_t *);
+static int parport_event(event_t event, int priority,
+			 event_callback_args_t *args);
+
+static dev_info_t dev_info = "parport_cs";
+static dev_link_t *dev_list = NULL;
+
+/*======================================================================
+
+    parport_attach() creates an "instance" of the driver, allocating
+    local data structures for one device.  The device is registered
+    with Card Services.
+
+======================================================================*/
+
+static dev_link_t *parport_attach(void)
+{
+    parport_info_t *info;
+    dev_link_t *link;
+    client_reg_t client_reg;
+    int ret;
+    
+    DEBUG(0, "parport_attach()\n");
+
+    /* Create new parport device */
+    info = kmalloc(sizeof(*info), GFP_KERNEL);
+    if (!info) return NULL;
+    memset(info, 0, sizeof(*info));
+    link = &info->link; link->priv = info;
+
+    link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->conf.Vcc = 50;
+    link->conf.IntType = INT_MEMORY_AND_IO;
+    
+    /* Register with Card Services */
+    link->next = dev_list;
+    dev_list = link;
+    client_reg.dev_info = &dev_info;
+    client_reg.EventMask =
+	CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+	CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+	CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+    client_reg.event_handler = &parport_event;
+    client_reg.Version = 0x0210;
+    client_reg.event_callback_args.client_data = link;
+    ret = pcmcia_register_client(&link->handle, &client_reg);
+    if (ret != CS_SUCCESS) {
+	cs_error(link->handle, RegisterClient, ret);
+	parport_detach(link);
+	return NULL;
+    }
+    
+    return link;
+} /* parport_attach */
+
+/*======================================================================
+
+    This deletes a driver "instance".  The device is de-registered
+    with Card Services.  If it has been released, all local data
+    structures are freed.  Otherwise, the structures will be freed
+    when the device is released.
+
+======================================================================*/
+
+static void parport_detach(dev_link_t *link)
+{
+    dev_link_t **linkp;
+    int ret;
+
+    DEBUG(0, "parport_detach(0x%p)\n", link);
+    
+    /* Locate device structure */
+    for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+	if (*linkp == link) break;
+    if (*linkp == NULL)
+	return;
+
+    if (link->state & DEV_CONFIG)
+	parport_cs_release(link);
+    
+    if (link->handle) {
+	ret = pcmcia_deregister_client(link->handle);
+	if (ret != CS_SUCCESS)
+	    cs_error(link->handle, DeregisterClient, ret);
+    }
+    
+    /* Unlink, free device structure */
+    *linkp = link->next;
+    kfree(link->priv);
+    
+} /* parport_detach */
+
+/*======================================================================
+
+    parport_config() is scheduled to run after a CARD_INSERTION event
+    is received, to configure the PCMCIA socket, and to make the
+    parport device available to the system.
+
+======================================================================*/
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+void parport_config(dev_link_t *link)
+{
+    client_handle_t handle = link->handle;
+    parport_info_t *info = link->priv;
+    tuple_t tuple;
+    u_short buf[128];
+    cisparse_t parse;
+    config_info_t conf;
+    cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
+    cistpl_cftable_entry_t dflt = { 0 };
+    struct parport *p;
+    int last_ret, last_fn;
+    
+    DEBUG(0, "parport_config(0x%p)\n", link);
+    
+    tuple.TupleData = (cisdata_t *)buf;
+    tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
+    tuple.Attributes = 0;
+    tuple.DesiredTuple = CISTPL_CONFIG;
+    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+    CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+    link->conf.ConfigBase = parse.config.base;
+    link->conf.Present = parse.config.rmask[0];
+    
+    /* Configure card */
+    link->state |= DEV_CONFIG;
+
+    /* Not sure if this is right... look up the current Vcc */
+    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
+    
+    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+    tuple.Attributes = 0;
+    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+    while (1) {
+	if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
+		pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+	    goto next_entry;
+
+	if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+	    cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+	    link->conf.ConfigIndex = cfg->index;
+	    if (epp_mode)
+		link->conf.ConfigIndex |= FORCE_EPP_MODE;
+	    link->io.BasePort1 = io->win[0].base;
+	    link->io.NumPorts1 = io->win[0].len;
+	    link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+	    if (io->nwin == 2) {
+		link->io.BasePort2 = io->win[1].base;
+		link->io.NumPorts2 = io->win[1].len;
+	    }
+	    if (pcmcia_request_io(link->handle, &link->io) != 0)
+		goto next_entry;
+	    /* If we've got this far, we're done */
+	    break;
+	}
+	
+    next_entry:
+	if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
+	CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+    }
+    
+    CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
+    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
+
+    release_region(link->io.BasePort1, link->io.NumPorts1);
+    if (link->io.NumPorts2)
+	release_region(link->io.BasePort2, link->io.NumPorts2);
+    p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
+			      link->irq.AssignedIRQ, PARPORT_DMA_NONE,
+			      NULL);
+    if (p == NULL) {
+	printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
+	       "0x%3x, irq %u failed\n", link->io.BasePort1,
+	       link->irq.AssignedIRQ);
+	goto failed;
+    }
+
+    p->modes |= PARPORT_MODE_PCSPP;
+    if (epp_mode)
+	p->modes |= PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP;
+    info->ndev = 1;
+    info->node.major = LP_MAJOR;
+    info->node.minor = p->number;
+    info->port = p;
+    strcpy(info->node.dev_name, p->name);
+    link->dev = &info->node;
+
+    link->state &= ~DEV_CONFIG_PENDING;
+    return;
+    
+cs_failed:
+    cs_error(link->handle, last_fn, last_ret);
+failed:
+    parport_cs_release(link);
+    link->state &= ~DEV_CONFIG_PENDING;
+
+} /* parport_config */
+
+/*======================================================================
+
+    After a card is removed, parport_cs_release() will unregister the
+    device, and release the PCMCIA configuration.  If the device is
+    still open, this will be postponed until it is closed.
+    
+======================================================================*/
+
+void parport_cs_release(dev_link_t *link)
+{
+    parport_info_t *info = link->priv;
+    
+    DEBUG(0, "parport_release(0x%p)\n", link);
+
+    if (info->ndev) {
+	struct parport *p = info->port;
+	parport_pc_unregister_port(p);
+	request_region(link->io.BasePort1, link->io.NumPorts1,
+		       info->node.dev_name);
+	if (link->io.NumPorts2)
+	    request_region(link->io.BasePort2, link->io.NumPorts2,
+			   info->node.dev_name);
+    }
+    info->ndev = 0;
+    link->dev = NULL;
+    
+    pcmcia_release_configuration(link->handle);
+    pcmcia_release_io(link->handle, &link->io);
+    pcmcia_release_irq(link->handle, &link->irq);
+    
+    link->state &= ~DEV_CONFIG;
+
+} /* parport_cs_release */
+
+/*======================================================================
+
+    The card status event handler.  Mostly, this schedules other
+    stuff to run after an event is received.
+    
+======================================================================*/
+
+int parport_event(event_t event, int priority,
+		  event_callback_args_t *args)
+{
+    dev_link_t *link = args->client_data;
+
+    DEBUG(1, "parport_event(0x%06x)\n", event);
+    
+    switch (event) {
+    case CS_EVENT_CARD_REMOVAL:
+	link->state &= ~DEV_PRESENT;
+	if (link->state & DEV_CONFIG)
+		parport_cs_release(link);
+	break;
+    case CS_EVENT_CARD_INSERTION:
+	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+	parport_config(link);
+	break;
+    case CS_EVENT_PM_SUSPEND:
+	link->state |= DEV_SUSPEND;
+	/* Fall through... */
+    case CS_EVENT_RESET_PHYSICAL:
+	if (link->state & DEV_CONFIG)
+	    pcmcia_release_configuration(link->handle);
+	break;
+    case CS_EVENT_PM_RESUME:
+	link->state &= ~DEV_SUSPEND;
+	/* Fall through... */
+    case CS_EVENT_CARD_RESET:
+	if (DEV_OK(link))
+	    pcmcia_request_configuration(link->handle, &link->conf);
+	break;
+    }
+    return 0;
+} /* parport_event */
+
+static struct pcmcia_driver parport_cs_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= "parport_cs",
+	},
+	.attach		= parport_attach,
+	.detach		= parport_detach,
+};
+
+static int __init init_parport_cs(void)
+{
+	return pcmcia_register_driver(&parport_cs_driver);
+}
+
+static void __exit exit_parport_cs(void)
+{
+	pcmcia_unregister_driver(&parport_cs_driver);
+	BUG_ON(dev_list != NULL);
+}
+
+module_init(init_parport_cs);
+module_exit(exit_parport_cs);
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
new file mode 100644
index 000000000000..02d72acd1c89
--- /dev/null
+++ b/drivers/parport/parport_gsc.c
@@ -0,0 +1,437 @@
+/*
+ *      Low-level parallel-support for PC-style hardware integrated in the 
+ *	LASI-Controller (on GSC-Bus) for HP-PARISC Workstations
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *	(C) 1999-2001 by Helge Deller <deller@gmx.de>
+ *
+ * 
+ * based on parport_pc.c by 
+ * 	    Grant Guenther <grant@torque.net>
+ * 	    Phil Blundell <philb@gnu.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell <campbell@torque.net>
+ *          Andrea Arcangeli
+ */
+
+#undef DEBUG	/* undef for production */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/sysctl.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+#include <asm/superio.h>
+
+#include <linux/parport.h>
+#include <asm/pdc.h>
+#include <asm/parisc-device.h>
+#include <asm/hardware.h>
+#include "parport_gsc.h"
+
+
+MODULE_AUTHOR("Helge Deller <deller@gmx.de>");
+MODULE_DESCRIPTION("HP-PARISC PC-style parallel port driver");
+MODULE_SUPPORTED_DEVICE("integrated PC-style parallel port");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Clear TIMEOUT BIT in EPP MODE
+ *
+ * This is also used in SPP detection.
+ */
+static int clear_epp_timeout(struct parport *pb)
+{
+	unsigned char r;
+
+	if (!(parport_gsc_read_status(pb) & 0x01))
+		return 1;
+
+	/* To clear timeout some chips require double read */
+	parport_gsc_read_status(pb);
+	r = parport_gsc_read_status(pb);
+	parport_writeb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
+	parport_writeb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+	r = parport_gsc_read_status(pb);
+
+	return !(r & 0x01);
+}
+
+/*
+ * Access functions.
+ *
+ * Most of these aren't static because they may be used by the
+ * parport_xxx_yyy macros.  extern __inline__ versions of several
+ * of these are in parport_gsc.h.
+ */
+
+static irqreturn_t parport_gsc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	parport_generic_irq(irq, (struct parport *) dev_id, regs);
+	return IRQ_HANDLED;
+}
+
+void parport_gsc_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
+}
+
+void parport_gsc_save_state(struct parport *p, struct parport_state *s)
+{
+	s->u.pc.ctr = parport_readb (CONTROL (p));
+}
+
+void parport_gsc_restore_state(struct parport *p, struct parport_state *s)
+{
+	parport_writeb (s->u.pc.ctr, CONTROL (p));
+}
+
+struct parport_operations parport_gsc_ops = 
+{
+	.write_data	= parport_gsc_write_data,
+	.read_data	= parport_gsc_read_data,
+
+	.write_control	= parport_gsc_write_control,
+	.read_control	= parport_gsc_read_control,
+	.frob_control	= parport_gsc_frob_control,
+
+	.read_status	= parport_gsc_read_status,
+
+	.enable_irq	= parport_gsc_enable_irq,
+	.disable_irq	= parport_gsc_disable_irq,
+
+	.data_forward	= parport_gsc_data_forward,
+	.data_reverse	= parport_gsc_data_reverse,
+
+	.init_state	= parport_gsc_init_state,
+	.save_state	= parport_gsc_save_state,
+	.restore_state	= parport_gsc_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data 	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* --- Mode detection ------------------------------------- */
+
+/*
+ * Checks for port existence, all ports support SPP MODE
+ */
+static int __devinit parport_SPP_supported(struct parport *pb)
+{
+	unsigned char r, w;
+
+	/*
+	 * first clear an eventually pending EPP timeout 
+	 * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
+	 * that does not even respond to SPP cycles if an EPP
+	 * timeout is pending
+	 */
+	clear_epp_timeout(pb);
+
+	/* Do a simple read-write test to make sure the port exists. */
+	w = 0xc;
+	parport_writeb (w, CONTROL (pb));
+
+	/* Is there a control register that we can read from?  Some
+	 * ports don't allow reads, so read_control just returns a
+	 * software copy. Some ports _do_ allow reads, so bypass the
+	 * software copy here.  In addition, some bits aren't
+	 * writable. */
+	r = parport_readb (CONTROL (pb));
+	if ((r & 0xf) == w) {
+		w = 0xe;
+		parport_writeb (w, CONTROL (pb));
+		r = parport_readb (CONTROL (pb));
+		parport_writeb (0xc, CONTROL (pb));
+		if ((r & 0xf) == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	/* Try the data register.  The data lines aren't tri-stated at
+	 * this stage, so we expect back what we wrote. */
+	w = 0xaa;
+	parport_gsc_write_data (pb, w);
+	r = parport_gsc_read_data (pb);
+	if (r == w) {
+		w = 0x55;
+		parport_gsc_write_data (pb, w);
+		r = parport_gsc_read_data (pb);
+		if (r == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	return 0;
+}
+
+/* Detect PS/2 support.
+ *
+ * Bit 5 (0x20) sets the PS/2 data direction; setting this high
+ * allows us to read data from the data lines.  In theory we would get back
+ * 0xff but any peripheral attached to the port may drag some or all of the
+ * lines down to zero.  So if we get back anything that isn't the contents
+ * of the data register we deem PS/2 support to be present. 
+ *
+ * Some SPP ports have "half PS/2" ability - you can't turn off the line
+ * drivers, but an external peripheral with sufficiently beefy drivers of
+ * its own can overpower them and assert its own levels onto the bus, from
+ * where they can then be read back as normal.  Ports with this property
+ * and the right type of device attached are likely to fail the SPP test,
+ * (as they will appear to have stuck bits) and so the fact that they might
+ * be misdetected here is rather academic. 
+ */
+
+static int __devinit parport_PS2_supported(struct parport *pb)
+{
+	int ok = 0;
+  
+	clear_epp_timeout(pb);
+
+	/* try to tri-state the buffer */
+	parport_gsc_data_reverse (pb);
+	
+	parport_gsc_write_data(pb, 0x55);
+	if (parport_gsc_read_data(pb) != 0x55) ok++;
+
+	parport_gsc_write_data(pb, 0xaa);
+	if (parport_gsc_read_data(pb) != 0xaa) ok++;
+
+	/* cancel input mode */
+	parport_gsc_data_forward (pb);
+
+	if (ok) {
+		pb->modes |= PARPORT_MODE_TRISTATE;
+	} else {
+		struct parport_gsc_private *priv = pb->private_data;
+		priv->ctr_writable &= ~0x20;
+	}
+
+	return ok;
+}
+
+
+/* --- Initialisation code -------------------------------- */
+
+struct parport *__devinit parport_gsc_probe_port (unsigned long base,
+						 unsigned long base_hi,
+						 int irq, int dma,
+						 struct pci_dev *dev)
+{
+	struct parport_gsc_private *priv;
+	struct parport_operations *ops;
+	struct parport tmp;
+	struct parport *p = &tmp;
+
+	priv = kmalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
+	if (!priv) {
+		printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
+		return NULL;
+	}
+	ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
+	if (!ops) {
+		printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
+			base);
+		kfree (priv);
+		return NULL;
+	}
+	memcpy (ops, &parport_gsc_ops, sizeof (struct parport_operations));
+	priv->ctr = 0xc;
+	priv->ctr_writable = 0xff;
+	priv->dma_buf = 0;
+	priv->dma_handle = 0;
+	priv->dev = dev;
+	p->base = base;
+	p->base_hi = base_hi;
+	p->irq = irq;
+	p->dma = dma;
+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+	p->ops = ops;
+	p->private_data = priv;
+	p->physport = p;
+	if (!parport_SPP_supported (p)) {
+		/* No port. */
+		kfree (priv);
+		return NULL;
+	}
+	parport_PS2_supported (p);
+
+	if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
+					PARPORT_DMA_NONE, ops))) {
+		kfree (priv);
+		kfree (ops);
+		return NULL;
+	}
+
+	p->base_hi = base_hi;
+	p->modes = tmp.modes;
+	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+	p->private_data = priv;
+
+	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+	p->irq = irq;
+	if (p->irq == PARPORT_IRQ_AUTO) {
+		p->irq = PARPORT_IRQ_NONE;
+	}
+	if (p->irq != PARPORT_IRQ_NONE) {
+		printk(", irq %d", p->irq);
+
+		if (p->dma == PARPORT_DMA_AUTO) {
+			p->dma = PARPORT_DMA_NONE;
+		}
+	}
+	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
+                                           is mandatory (see above) */
+		p->dma = PARPORT_DMA_NONE;
+
+	printk(" [");
+#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+	{
+		int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT)
+		printmode(EPP);
+//		printmode(ECP);
+//		printmode(DMA);
+	}
+#undef printmode
+	printk("]\n");
+
+	if (p->irq != PARPORT_IRQ_NONE) {
+		if (request_irq (p->irq, parport_gsc_interrupt,
+				 0, p->name, p)) {
+			printk (KERN_WARNING "%s: irq %d in use, "
+				"resorting to polled operation\n",
+				p->name, p->irq);
+			p->irq = PARPORT_IRQ_NONE;
+			p->dma = PARPORT_DMA_NONE;
+		}
+	}
+
+	/* Done probing.  Now put the port into a sensible start-up state. */
+
+	parport_gsc_write_data(p, 0);
+	parport_gsc_data_forward (p);
+
+	/* Now that we've told the sharing engine about the port, and
+	   found out its characteristics, let the high-level drivers
+	   know about it. */
+	parport_announce_port (p);
+
+	return p;
+}
+
+
+#define PARPORT_GSC_OFFSET 0x800
+
+static int __initdata parport_count;
+
+static int __devinit parport_init_chip(struct parisc_device *dev)
+{
+	struct parport *p;
+	unsigned long port;
+
+	if (!dev->irq) {
+		printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa);
+		return -ENODEV;
+	}
+
+	port = dev->hpa + PARPORT_GSC_OFFSET;
+	
+	/* some older machines with ASP-chip don't support
+	 * the enhanced parport modes.
+	 */
+	if (boot_cpu_data.cpu_type > pcxt && !pdc_add_valid(port+4)) {
+
+		/* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */
+		printk("%s: initialize bidirectional-mode.\n", __FUNCTION__);
+		parport_writeb ( (0x10 + 0x20), port + 4);
+
+	} else {
+		printk("%s: enhanced parport-modes not supported.\n", __FUNCTION__);
+	}
+	
+	p = parport_gsc_probe_port(port, 0, dev->irq,
+			/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL);
+	if (p)
+		parport_count++;
+	dev->dev.driver_data = p;
+
+	return 0;
+}
+
+static int __devexit parport_remove_chip(struct parisc_device *dev)
+{
+	struct parport *p = dev->dev.driver_data;
+	if (p) {
+		struct parport_gsc_private *priv = p->private_data;
+		struct parport_operations *ops = p->ops;
+		parport_remove_port(p);
+		if (p->dma != PARPORT_DMA_NONE)
+			free_dma(p->dma);
+		if (p->irq != PARPORT_IRQ_NONE)
+			free_irq(p->irq, p);
+		if (priv->dma_buf)
+			pci_free_consistent(priv->dev, PAGE_SIZE,
+					    priv->dma_buf,
+					    priv->dma_handle);
+		kfree (p->private_data);
+		parport_put_port(p);
+		kfree (ops); /* hope no-one cached it */
+	}
+	return 0;
+}
+
+static struct parisc_device_id parport_tbl[] = {
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x74 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, parport_tbl);
+
+static struct parisc_driver parport_driver = {
+	.name		= "Parallel",
+	.id_table	= parport_tbl,
+	.probe		= parport_init_chip,
+	.remove		= __devexit_p(parport_remove_chip),
+};
+
+int __devinit parport_gsc_init(void)
+{
+	return register_parisc_driver(&parport_driver);
+}
+
+static void __devexit parport_gsc_exit(void)
+{
+	unregister_parisc_driver(&parport_driver);
+}
+
+module_init(parport_gsc_init);
+module_exit(parport_gsc_exit);
diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h
new file mode 100644
index 000000000000..662f6c1fee5d
--- /dev/null
+++ b/drivers/parport/parport_gsc.h
@@ -0,0 +1,222 @@
+/*
+ *	Low-level parallel-support for PC-style hardware integrated in the
+ *	LASI-Controller (on GSC-Bus) for HP-PARISC Workstations
+ *
+ *	(C) 1999-2001 by Helge Deller <deller@gmx.de>
+ *
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * based on parport_pc.c by
+ * 	    Grant Guenther <grant@torque.net>
+ * 	    Phil Blundell <Philip.Blundell@pobox.com>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell <campbell@torque.net>
+ *          Andrea Arcangeli
+ */
+
+#ifndef	__DRIVERS_PARPORT_PARPORT_GSC_H
+#define	__DRIVERS_PARPORT_PARPORT_GSC_H
+
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef	DEBUG_PARPORT	/* undefine for production */
+#define DELAY_TIME 	0
+
+#if DELAY_TIME == 0
+#define parport_readb	gsc_readb
+#define parport_writeb	gsc_writeb
+#else
+static __inline__ unsigned char parport_readb( unsigned long port )
+{
+    udelay(DELAY_TIME);
+    return gsc_readb(port);
+}
+
+static __inline__ void parport_writeb( unsigned char value, unsigned long port )
+{
+    gsc_writeb(value,port);
+    udelay(DELAY_TIME);
+}
+#endif
+
+/* --- register definitions ------------------------------- */
+
+#define EPPDATA(p)  ((p)->base    + 0x4)
+#define EPPADDR(p)  ((p)->base    + 0x3)
+#define CONTROL(p)  ((p)->base    + 0x2)
+#define STATUS(p)   ((p)->base    + 0x1)
+#define DATA(p)     ((p)->base    + 0x0)
+
+struct parport_gsc_private {
+	/* Contents of CTR. */
+	unsigned char ctr;
+
+	/* Bitmask of writable CTR bits. */
+	unsigned char ctr_writable;
+
+	/* Number of bytes per portword. */
+	int pword;
+
+	/* Not used yet. */
+	int readIntrThreshold;
+	int writeIntrThreshold;
+
+	/* buffer suitable for DMA, if DMA enabled */
+	char *dma_buf;
+	dma_addr_t dma_handle;
+	struct pci_dev *dev;
+};
+
+static inline void parport_gsc_write_data(struct parport *p, unsigned char d)
+{
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_gsc_write_data(%p,0x%02x)\n", p, d);
+#endif
+	parport_writeb(d, DATA(p));
+}
+
+static inline unsigned char parport_gsc_read_data(struct parport *p)
+{
+	unsigned char val = parport_readb (DATA (p));
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_gsc_read_data(%p) = 0x%02x\n",
+		p, val);
+#endif
+	return val;
+}
+
+/* __parport_gsc_frob_control differs from parport_gsc_frob_control in that
+ * it doesn't do any extra masking. */
+static inline unsigned char __parport_gsc_frob_control(struct parport *p,
+							unsigned char mask,
+							unsigned char val)
+{
+	struct parport_gsc_private *priv = p->physport->private_data;
+	unsigned char ctr = priv->ctr;
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG
+		"__parport_gsc_frob_control(%02x,%02x): %02x -> %02x\n",
+		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
+#endif
+	ctr = (ctr & ~mask) ^ val;
+	ctr &= priv->ctr_writable; /* only write writable bits. */
+	parport_writeb (ctr, CONTROL (p));
+	priv->ctr = ctr;	/* Update soft copy */
+	return ctr;
+}
+
+static inline void parport_gsc_data_reverse(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x20, 0x20);
+}
+
+static inline void parport_gsc_data_forward(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x20, 0x00);
+}
+
+static inline void parport_gsc_write_control(struct parport *p,
+						 unsigned char d)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (d & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
+			p->name, p->cad->name);
+		parport_gsc_data_reverse (p);
+	}
+
+	__parport_gsc_frob_control (p, wm, d & wm);
+}
+
+static inline unsigned char parport_gsc_read_control(struct parport *p)
+{
+	const unsigned char rm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+	const struct parport_gsc_private *priv = p->physport->private_data;
+	return priv->ctr & rm; /* Use soft copy */
+}
+
+static inline unsigned char parport_gsc_frob_control(struct parport *p,
+							unsigned char mask,
+							unsigned char val)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (mask & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
+			p->name, p->cad->name,
+			(val & 0x20) ? "reverse" : "forward");
+		if (val & 0x20)
+			parport_gsc_data_reverse (p);
+		else
+			parport_gsc_data_forward (p);
+	}
+
+	/* Restrict mask and val to control lines. */
+	mask &= wm;
+	val &= wm;
+
+	return __parport_gsc_frob_control (p, mask, val);
+}
+
+static inline unsigned char parport_gsc_read_status(struct parport *p)
+{
+	return parport_readb (STATUS(p));
+}
+
+static inline void parport_gsc_disable_irq(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x10, 0x00);
+}
+
+static inline void parport_gsc_enable_irq(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x10, 0x10);
+}
+
+extern void parport_gsc_release_resources(struct parport *p);
+
+extern int parport_gsc_claim_resources(struct parport *p);
+
+extern void parport_gsc_init_state(struct pardevice *, struct parport_state *s);
+
+extern void parport_gsc_save_state(struct parport *p, struct parport_state *s);
+
+extern void parport_gsc_restore_state(struct parport *p, struct parport_state *s);
+
+extern void parport_gsc_inc_use_count(void);
+
+extern void parport_gsc_dec_use_count(void);
+
+extern struct parport *parport_gsc_probe_port(unsigned long base,
+						unsigned long base_hi,
+						int irq, int dma,
+						struct pci_dev *dev);
+
+#endif	/* __DRIVERS_PARPORT_PARPORT_GSC_H */
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
new file mode 100644
index 000000000000..c85364765ef8
--- /dev/null
+++ b/drivers/parport/parport_mfc3.c
@@ -0,0 +1,404 @@
+/* Low-level parallel port routines for the Multiface 3 card
+ *
+ * Author: Joerg Dorchain <joerg@dorchain.net>
+ *
+ * (C) The elitist m68k Users(TM)
+ *
+ * based on the existing parport_amiga and lp_mfc
+ *
+ *
+ * From the MFC3 documentation:
+ * 
+ * Miscellaneous PIA Details
+ * -------------------------
+ * 
+ * 	The two open-drain interrupt outputs /IRQA and /IRQB are routed to
+ * /INT2 of the Z2 bus.
+ * 
+ * 	The CPU data bus of the PIA (D0-D7) is connected to D8-D15 on the Z2
+ * bus. This means that any PIA registers are accessed at even addresses.
+ * 
+ * Centronics Pin Connections for the PIA
+ * --------------------------------------
+ * 
+ * 	The following table shows the connections between the PIA and the
+ * Centronics interface connector. These connections implement a single, but
+ * very complete, Centronics type interface. The Pin column gives the pin
+ * numbers of the PIA. The Centronics pin numbers can be found in the section
+ * "Parallel Connectors".
+ * 
+ * 
+ *    Pin | PIA | Dir | Centronics Names
+ * -------+-----+-----+---------------------------------------------------------
+ *     19 | CB2 | --> | /STROBE (aka /DRDY)
+ *  10-17 | PBx | <-> | DATA0 - DATA7
+ *     18 | CB1 | <-- | /ACK
+ *     40 | CA1 | <-- | BUSY
+ *      3 | PA1 | <-- | PAPER-OUT (aka POUT)
+ *      4 | PA2 | <-- | SELECTED (aka SEL)
+ *      9 | PA7 | --> | /INIT (aka /RESET or /INPUT-PRIME)
+ *      6 | PA4 | <-- | /ERROR (aka /FAULT)
+ *      7 | PA5 | --> | DIR (aka /SELECT-IN)
+ *      8 | PA6 | --> | /AUTO-FEED-XT
+ *     39 | CA2 | --> | open
+ *      5 | PA3 | <-- | /ACK (same as CB1!)
+ *      2 | PA0 | <-- | BUSY (same as CA1!)
+ * -------+-----+-----+---------------------------------------------------------
+ * 
+ * Should be enough to understand some of the driver.
+ *
+ * Per convention for normal use the port registers are visible.
+ * If you need the data direction registers, restore the value in the
+ * control register.
+ */
+
+#include "multiface.h"
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/mc6821.h>
+#include <linux/zorro.h>
+#include <linux/interrupt.h>
+#include <asm/setup.h>
+#include <asm/amigahw.h>
+#include <asm/irq.h>
+#include <asm/amigaints.h>
+
+/* Maximum Number of Cards supported */
+#define MAX_MFC 5
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+static inline int DPRINTK(void *nothing, ...) {return 0;}
+#endif
+
+static struct parport *this_port[MAX_MFC] = {NULL, };
+static volatile int dummy; /* for trigger readds */
+
+#define pia(dev) ((struct pia *)(dev->base))
+static struct parport_operations pp_mfc3_ops;
+
+static void mfc3_write_data(struct parport *p, unsigned char data)
+{
+DPRINTK(KERN_DEBUG "write_data %c\n",data);
+
+	dummy = pia(p)->pprb; /* clears irq bit */
+	/* Triggers also /STROBE.*/
+	pia(p)->pprb = data;
+}
+
+static unsigned char mfc3_read_data(struct parport *p)
+{
+	/* clears interrupt bit. Triggers also /STROBE. */
+	return pia(p)->pprb;
+}
+
+static unsigned char control_pc_to_mfc3(unsigned char control)
+{
+	unsigned char ret = 32|64;
+
+	if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
+		ret &= ~32; /* /SELECT_IN */
+	if (control & PARPORT_CONTROL_INIT) /* INITP */
+		ret |= 128;
+	if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
+		ret &= ~64;
+	if (control & PARPORT_CONTROL_STROBE) /* Strobe */
+		/* Handled directly by hardware */;
+	return ret;
+}
+
+static unsigned char control_mfc3_to_pc(unsigned char control)
+{
+	unsigned char ret = PARPORT_CONTROL_STROBE 
+			  | PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_SELECT;
+
+	if (control & 128) /* /INITP */
+		ret |= PARPORT_CONTROL_INIT;
+	if (control & 64) /* /AUTOLF */
+		ret &= ~PARPORT_CONTROL_AUTOFD;
+	if (control & 32) /* /SELECT_IN */
+		ret &= ~PARPORT_CONTROL_SELECT;
+	return ret;
+}
+
+static void mfc3_write_control(struct parport *p, unsigned char control)
+{
+DPRINTK(KERN_DEBUG "write_control %02x\n",control);
+	pia(p)->ppra = (pia(p)->ppra & 0x1f) | control_pc_to_mfc3(control);
+}
+	
+static unsigned char mfc3_read_control( struct parport *p)
+{
+DPRINTK(KERN_DEBUG "read_control \n");
+	return control_mfc3_to_pc(pia(p)->ppra & 0xe0);
+}
+
+static unsigned char mfc3_frob_control( struct parport *p, unsigned char mask, unsigned char val)
+{
+	unsigned char old;
+
+DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
+	old = mfc3_read_control(p);
+	mfc3_write_control(p, (old & ~mask) ^ val);
+	return old;
+}
+
+#if 0 /* currently unused */
+static unsigned char status_pc_to_mfc3(unsigned char status)
+{
+	unsigned char ret = 1;
+
+	if (status & PARPORT_STATUS_BUSY) /* Busy */
+		ret &= ~1;
+	if (status & PARPORT_STATUS_ACK) /* Ack */
+		ret |= 8;
+	if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
+		ret |= 2;
+	if (status & PARPORT_STATUS_SELECT) /* select */
+		ret |= 4;
+	if (status & PARPORT_STATUS_ERROR) /* error */
+		ret |= 16;
+	return ret;
+}
+#endif
+
+static unsigned char status_mfc3_to_pc(unsigned char status)
+{
+	unsigned char ret = PARPORT_STATUS_BUSY;
+
+	if (status & 1) /* Busy */
+		ret &= ~PARPORT_STATUS_BUSY;
+	if (status & 2) /* PaperOut */
+		ret |= PARPORT_STATUS_PAPEROUT;
+	if (status & 4) /* Selected */
+		ret |= PARPORT_STATUS_SELECT;
+	if (status & 8) /* Ack */
+		ret |= PARPORT_STATUS_ACK;
+	if (status & 16) /* /ERROR */
+		ret |= PARPORT_STATUS_ERROR;
+
+	return ret;
+}
+
+#if 0 /* currently unused */
+static void mfc3_write_status( struct parport *p, unsigned char status)
+{
+DPRINTK(KERN_DEBUG "write_status %02x\n",status);
+	pia(p)->ppra = (pia(p)->ppra & 0xe0) | status_pc_to_mfc3(status);
+}
+#endif
+
+static unsigned char mfc3_read_status(struct parport *p)
+{
+	unsigned char status;
+
+	status = status_mfc3_to_pc(pia(p)->ppra & 0x1f);
+DPRINTK(KERN_DEBUG "read_status %02x\n", status);
+	return status;
+}
+
+#if 0 /* currently unused */
+static void mfc3_change_mode( struct parport *p, int m)
+{
+	/* XXX: This port only has one mode, and I am
+	not sure about the corresponding PC-style mode*/
+}
+#endif
+
+static int use_cnt = 0;
+
+static irqreturn_t mfc3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int i;
+
+	for( i = 0; i < MAX_MFC; i++)
+		if (this_port[i] != NULL)
+			if (pia(this_port[i])->crb & 128) { /* Board caused interrupt */
+				dummy = pia(this_port[i])->pprb; /* clear irq bit */
+				parport_generic_irq(irq, this_port[i], regs);
+			}
+	return IRQ_HANDLED;
+}
+
+static void mfc3_enable_irq(struct parport *p)
+{
+	pia(p)->crb |= PIA_C1_ENABLE_IRQ;
+}
+
+static void mfc3_disable_irq(struct parport *p)
+{
+	pia(p)->crb &= ~PIA_C1_ENABLE_IRQ;
+}
+
+static void mfc3_data_forward(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "forward\n");
+	pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */
+	pia(p)->pddrb = 255; /* all pins output */
+	pia(p)->crb |= PIA_DDR; /* make data register visible - default */
+}
+
+static void mfc3_data_reverse(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "reverse\n");
+	pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */
+	pia(p)->pddrb = 0; /* all pins input */
+	pia(p)->crb |= PIA_DDR; /* make data register visible - default */
+}
+
+static void mfc3_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.amiga.data = 0;
+	s->u.amiga.datadir = 255;
+	s->u.amiga.status = 0;
+	s->u.amiga.statusdir = 0xe0;
+}
+
+static void mfc3_save_state(struct parport *p, struct parport_state *s)
+{
+	s->u.amiga.data = pia(p)->pprb;
+	pia(p)->crb &= ~PIA_DDR;
+	s->u.amiga.datadir = pia(p)->pddrb;
+	pia(p)->crb |= PIA_DDR;
+	s->u.amiga.status = pia(p)->ppra;
+	pia(p)->cra &= ~PIA_DDR;
+	s->u.amiga.statusdir = pia(p)->pddrb;
+	pia(p)->cra |= PIA_DDR;
+}
+
+static void mfc3_restore_state(struct parport *p, struct parport_state *s)
+{
+	pia(p)->pprb = s->u.amiga.data;
+	pia(p)->crb &= ~PIA_DDR;
+	pia(p)->pddrb = s->u.amiga.datadir;
+	pia(p)->crb |= PIA_DDR;
+	pia(p)->ppra = s->u.amiga.status;
+	pia(p)->cra &= ~PIA_DDR;
+	pia(p)->pddrb = s->u.amiga.statusdir;
+	pia(p)->cra |= PIA_DDR;
+}
+
+static struct parport_operations pp_mfc3_ops = {
+	.write_data	= mfc3_write_data,
+	.read_data	= mfc3_read_data,
+
+	.write_control	= mfc3_write_control,
+	.read_control	= mfc3_read_control,
+	.frob_control	= mfc3_frob_control,
+
+	.read_status	= mfc3_read_status,
+
+	.enable_irq	= mfc3_enable_irq,
+	.disable_irq	= mfc3_disable_irq,
+
+	.data_forward	= mfc3_data_forward, 
+	.data_reverse	= mfc3_data_reverse, 
+
+	.init_state	= mfc3_init_state,
+	.save_state	= mfc3_save_state,
+	.restore_state	= mfc3_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* ----------- Initialisation code --------------------------------- */
+
+static int __init parport_mfc3_init(void)
+{
+	struct parport *p;
+	int pias = 0;
+	struct pia *pp;
+	struct zorro_dev *z = NULL;
+
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
+	while ((z = zorro_find_device(ZORRO_PROD_BSC_MULTIFACE_III, z))) {
+		unsigned long piabase = z->resource.start+PIABASE;
+		if (!request_mem_region(piabase, sizeof(struct pia), "PIA"))
+			continue;
+
+		pp = (struct pia *)ZTWO_VADDR(piabase);
+		pp->crb = 0;
+		pp->pddrb = 255; /* all data pins output */
+		pp->crb = PIA_DDR|32|8;
+		dummy = pp->pddrb; /* reading clears interrupt */
+		pp->cra = 0;
+		pp->pddra = 0xe0; /* /RESET,  /DIR ,/AUTO-FEED output */
+		pp->cra = PIA_DDR;
+		pp->ppra = 0; /* reset printer */
+		udelay(10);
+		pp->ppra = 128;
+		p = parport_register_port((unsigned long)pp, IRQ_AMIGA_PORTS,
+					  PARPORT_DMA_NONE, &pp_mfc3_ops);
+		if (!p)
+			goto out_port;
+
+		if (p->irq != PARPORT_IRQ_NONE) {
+			if (use_cnt++ == 0)
+				if (request_irq(IRQ_AMIGA_PORTS, mfc3_interrupt, SA_SHIRQ, p->name, &pp_mfc3_ops))
+					goto out_irq;
+		}
+
+		this_port[pias++] = p;
+		printk(KERN_INFO "%s: Multiface III port using irq\n", p->name);
+		/* XXX: set operating mode */
+
+		p->private_data = (void *)piabase;
+		parport_announce_port (p);
+
+		if (pias >= MAX_MFC)
+			break;
+		continue;
+
+	out_irq:
+		parport_put_port(p);
+	out_port:
+		release_mem_region(piabase, sizeof(struct pia));
+	}
+
+	return pias ? 0 : -ENODEV;
+}
+
+static void __exit parport_mfc3_exit(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_MFC; i++) {
+		if (!this_port[i])
+			continue;
+		parport_remove_port(this_port[i]);
+		if (!this_port[i]->irq != PARPORT_IRQ_NONE) {
+			if (--use_cnt == 0) 
+				free_irq(IRQ_AMIGA_PORTS, &pp_mfc3_ops);
+		}
+		release_mem_region(ZTWO_PADDR(this_port[i]->private_data), sizeof(struct pia));
+		parport_put_port(this_port[i]);
+	}
+}
+
+
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Paralllel Port");
+MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_mfc3_init)
+module_exit(parport_mfc3_exit)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
new file mode 100644
index 000000000000..c5774e7855d0
--- /dev/null
+++ b/drivers/parport/parport_pc.c
@@ -0,0 +1,3415 @@
+/* Low-level parallel-port routines for 8255-based PC-style hardware.
+ * 
+ * Authors: Phil Blundell <philb@gnu.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell <campbell@torque.net>
+ *          Andrea Arcangeli
+ *
+ * based on work by Grant Guenther <grant@torque.net> and Phil Blundell.
+ *
+ * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
+ * DMA support - Bert De Jonghe <bert@sophis.be>
+ * Many ECP bugs fixed.  Fred Barnes & Jamie Lokier, 1999
+ * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. 
+ * Various hacks, Fred Barnes, 04/2001
+ * Updated probing logic - Adam Belay <ambx1@neo.rr.com>
+ */
+
+/* This driver should work with any hardware that is broadly compatible
+ * with that in the IBM PC.  This applies to the majority of integrated
+ * I/O chipsets that are commonly available.  The expected register
+ * layout is:
+ *
+ *	base+0		data
+ *	base+1		status
+ *	base+2		control
+ *
+ * In addition, there are some optional registers:
+ *
+ *	base+3		EPP address
+ *	base+4		EPP data
+ *	base+0x400	ECP config A
+ *	base+0x401	ECP config B
+ *	base+0x402	ECP control
+ *
+ * All registers are 8 bits wide and read/write.  If your hardware differs
+ * only in register addresses (eg because your registers are on 32-bit
+ * word boundaries) then you can alter the constants in parport_pc.h to
+ * accommodate this.
+ *
+ * Note that the ECP registers may not start at offset 0x400 for PCI cards,
+ * but rather will start at port->base_hi.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/pnp.h>
+#include <linux/sysctl.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+#include <linux/via.h>
+#include <asm/parport.h>
+
+#define PARPORT_PC_MAX_PORTS PARPORT_MAX
+
+/* ECR modes */
+#define ECR_SPP 00
+#define ECR_PS2 01
+#define ECR_PPF 02
+#define ECR_ECP 03
+#define ECR_EPP 04
+#define ECR_VND 05
+#define ECR_TST 06
+#define ECR_CNF 07
+#define ECR_MODE_MASK 0xe0
+#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v))
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DPRINTK  printk
+#else
+#define DPRINTK(stuff...)
+#endif
+
+
+#define NR_SUPERIOS 3
+static struct superio_struct {	/* For Super-IO chips autodetection */
+	int io;
+	int irq;
+	int dma;
+} superios[NR_SUPERIOS] __devinitdata = { {0,},};
+
+static int user_specified;
+#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
+       (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
+static int verbose_probing;
+#endif
+static int pci_registered_parport;
+static int pnp_registered_parport;
+
+/* frob_control, but for ECR */
+static void frob_econtrol (struct parport *pb, unsigned char m,
+			   unsigned char v)
+{
+	unsigned char ectr = 0;
+
+	if (m != 0xff)
+		ectr = inb (ECONTROL (pb));
+
+	DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
+		m, v, ectr, (ectr & ~m) ^ v);
+
+	outb ((ectr & ~m) ^ v, ECONTROL (pb));
+}
+
+static __inline__ void frob_set_mode (struct parport *p, int mode)
+{
+	frob_econtrol (p, ECR_MODE_MASK, mode << 5);
+}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+/* Safely change the mode bits in the ECR 
+   Returns:
+	    0    : Success
+	   -EBUSY: Could not drain FIFO in some finite amount of time,
+		   mode not changed!
+ */
+static int change_mode(struct parport *p, int m)
+{
+	const struct parport_pc_private *priv = p->physport->private_data;
+	unsigned char oecr;
+	int mode;
+
+	DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m);
+
+	if (!priv->ecr) {
+		printk (KERN_DEBUG "change_mode: but there's no ECR!\n");
+		return 0;
+	}
+
+	/* Bits <7:5> contain the mode. */
+	oecr = inb (ECONTROL (p));
+	mode = (oecr >> 5) & 0x7;
+	if (mode == m) return 0;
+
+	if (mode >= 2 && !(priv->ctr & 0x20)) {
+		/* This mode resets the FIFO, so we may
+		 * have to wait for it to drain first. */
+		unsigned long expire = jiffies + p->physport->cad->timeout;
+		int counter;
+		switch (mode) {
+		case ECR_PPF: /* Parallel Port FIFO mode */
+		case ECR_ECP: /* ECP Parallel Port mode */
+			/* Busy wait for 200us */
+			for (counter = 0; counter < 40; counter++) {
+				if (inb (ECONTROL (p)) & 0x01)
+					break;
+				if (signal_pending (current)) break;
+				udelay (5);
+			}
+
+			/* Poll slowly. */
+			while (!(inb (ECONTROL (p)) & 0x01)) {
+				if (time_after_eq (jiffies, expire))
+					/* The FIFO is stuck. */
+					return -EBUSY;
+				__set_current_state (TASK_INTERRUPTIBLE);
+				schedule_timeout ((HZ + 99) / 100);
+				if (signal_pending (current))
+					break;
+			}
+		}
+	}
+
+	if (mode >= 2 && m >= 2) {
+		/* We have to go through mode 001 */
+		oecr &= ~(7 << 5);
+		oecr |= ECR_PS2 << 5;
+		ECR_WRITE (p, oecr);
+	}
+
+	/* Set the mode. */
+	oecr &= ~(7 << 5);
+	oecr |= m << 5;
+	ECR_WRITE (p, oecr);
+	return 0;
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Find FIFO lossage; FIFO is reset */
+#if 0
+static int get_fifo_residue (struct parport *p)
+{
+	int residue;
+	int cnfga;
+	const struct parport_pc_private *priv = p->physport->private_data;
+
+	/* Adjust for the contents of the FIFO. */
+	for (residue = priv->fifo_depth; ; residue--) {
+		if (inb (ECONTROL (p)) & 0x2)
+				/* Full up. */
+			break;
+
+		outb (0, FIFO (p));
+	}
+
+	printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
+		residue);
+
+	/* Reset the FIFO. */
+	frob_set_mode (p, ECR_PS2);
+
+	/* Now change to config mode and clean up. FIXME */
+	frob_set_mode (p, ECR_CNF);
+	cnfga = inb (CONFIGA (p));
+	printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
+
+	if (!(cnfga & (1<<2))) {
+		printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
+		residue++;
+	}
+
+	/* Don't care about partial PWords until support is added for
+	 * PWord != 1 byte. */
+
+	/* Back to PS2 mode. */
+	frob_set_mode (p, ECR_PS2);
+
+	DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p)));
+	return residue;
+}
+#endif  /*  0 */
+#endif /* IEEE 1284 support */
+#endif /* FIFO support */
+
+/*
+ * Clear TIMEOUT BIT in EPP MODE
+ *
+ * This is also used in SPP detection.
+ */
+static int clear_epp_timeout(struct parport *pb)
+{
+	unsigned char r;
+
+	if (!(parport_pc_read_status(pb) & 0x01))
+		return 1;
+
+	/* To clear timeout some chips require double read */
+	parport_pc_read_status(pb);
+	r = parport_pc_read_status(pb);
+	outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
+	outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+	r = parport_pc_read_status(pb);
+
+	return !(r & 0x01);
+}
+
+/*
+ * Access functions.
+ *
+ * Most of these aren't static because they may be used by the
+ * parport_xxx_yyy macros.  extern __inline__ versions of several
+ * of these are in parport_pc.h.
+ */
+
+static irqreturn_t parport_pc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	parport_generic_irq(irq, (struct parport *) dev_id, regs);
+	/* FIXME! Was it really ours? */
+	return IRQ_HANDLED;
+}
+
+static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.pc.ctr = 0xc;
+	if (dev->irq_func &&
+	    dev->port->irq != PARPORT_IRQ_NONE)
+		/* Set ackIntEn */
+		s->u.pc.ctr |= 0x10;
+
+	s->u.pc.ecr = 0x34; /* NetMos chip can cause problems 0x24;
+			     * D.Gruszka VScom */
+}
+
+static void parport_pc_save_state(struct parport *p, struct parport_state *s)
+{
+	const struct parport_pc_private *priv = p->physport->private_data;
+	s->u.pc.ctr = priv->ctr;
+	if (priv->ecr)
+		s->u.pc.ecr = inb (ECONTROL (p));
+}
+
+static void parport_pc_restore_state(struct parport *p, struct parport_state *s)
+{
+	struct parport_pc_private *priv = p->physport->private_data;
+	register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
+	outb (c, CONTROL (p));
+	priv->ctr = c;
+	if (priv->ecr)
+		ECR_WRITE (p, s->u.pc.ecr);
+}
+
+#ifdef CONFIG_PARPORT_1284
+static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
+					size_t length, int flags)
+{
+	size_t got = 0;
+
+	if (flags & PARPORT_W91284PIC) {
+		unsigned char status;
+		size_t left = length;
+
+		/* use knowledge about data lines..:
+		 *  nFault is 0 if there is at least 1 byte in the Warp's FIFO
+		 *  pError is 1 if there are 16 bytes in the Warp's FIFO
+		 */
+		status = inb (STATUS (port));
+
+		while (!(status & 0x08) && (got < length)) {
+			if ((left >= 16) && (status & 0x20) && !(status & 0x08)) {
+				/* can grab 16 bytes from warp fifo */
+				if (!((long)buf & 0x03)) {
+					insl (EPPDATA (port), buf, 4);
+				} else {
+					insb (EPPDATA (port), buf, 16);
+				}
+				buf += 16;
+				got += 16;
+				left -= 16;
+			} else {
+				/* grab single byte from the warp fifo */
+				*((char *)buf) = inb (EPPDATA (port));
+				buf++;
+				got++;
+				left--;
+			}
+			status = inb (STATUS (port));
+			if (status & 0x01) {
+				/* EPP timeout should never occur... */
+				printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
+					"w91284pic (should not have done)\n", port->name);
+				clear_epp_timeout (port);
+			}
+		}
+		return got;
+	}
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		if (!(((long)buf | length) & 0x03)) {
+			insl (EPPDATA (port), buf, (length >> 2));
+		} else {
+			insb (EPPDATA (port), buf, length);
+		}
+		if (inb (STATUS (port)) & 0x01) {
+			clear_epp_timeout (port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; got < length; got++) {
+		*((char*)buf) = inb (EPPDATA(port));
+		buf++;
+		if (inb (STATUS (port)) & 0x01) {
+			/* EPP timeout */
+			clear_epp_timeout (port);
+			break;
+		}
+	}
+
+	return got;
+}
+
+static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
+					 size_t length, int flags)
+{
+	size_t written = 0;
+
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		if (!(((long)buf | length) & 0x03)) {
+			outsl (EPPDATA (port), buf, (length >> 2));
+		} else {
+			outsb (EPPDATA (port), buf, length);
+		}
+		if (inb (STATUS (port)) & 0x01) {
+			clear_epp_timeout (port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; written < length; written++) {
+		outb (*((char*)buf), EPPDATA(port));
+		buf++;
+		if (inb (STATUS(port)) & 0x01) {
+			clear_epp_timeout (port);
+			break;
+		}
+	}
+
+	return written;
+}
+
+static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
+					size_t length, int flags)
+{
+	size_t got = 0;
+
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		insb (EPPADDR (port), buf, length);
+		if (inb (STATUS (port)) & 0x01) {
+			clear_epp_timeout (port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; got < length; got++) {
+		*((char*)buf) = inb (EPPADDR (port));
+		buf++;
+		if (inb (STATUS (port)) & 0x01) {
+			clear_epp_timeout (port);
+			break;
+		}
+	}
+
+	return got;
+}
+
+static size_t parport_pc_epp_write_addr (struct parport *port,
+					 const void *buf, size_t length,
+					 int flags)
+{
+	size_t written = 0;
+
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		outsb (EPPADDR (port), buf, length);
+		if (inb (STATUS (port)) & 0x01) {
+			clear_epp_timeout (port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; written < length; written++) {
+		outb (*((char*)buf), EPPADDR (port));
+		buf++;
+		if (inb (STATUS (port)) & 0x01) {
+			clear_epp_timeout (port);
+			break;
+		}
+	}
+
+	return written;
+}
+
+static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf,
+					   size_t length, int flags)
+{
+	size_t got;
+
+	frob_set_mode (port, ECR_EPP);
+	parport_pc_data_reverse (port);
+	parport_pc_write_control (port, 0x4);
+	got = parport_pc_epp_read_data (port, buf, length, flags);
+	frob_set_mode (port, ECR_PS2);
+
+	return got;
+}
+
+static size_t parport_pc_ecpepp_write_data (struct parport *port,
+					    const void *buf, size_t length,
+					    int flags)
+{
+	size_t written;
+
+	frob_set_mode (port, ECR_EPP);
+	parport_pc_write_control (port, 0x4);
+	parport_pc_data_forward (port);
+	written = parport_pc_epp_write_data (port, buf, length, flags);
+	frob_set_mode (port, ECR_PS2);
+
+	return written;
+}
+
+static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf,
+					   size_t length, int flags)
+{
+	size_t got;
+
+	frob_set_mode (port, ECR_EPP);
+	parport_pc_data_reverse (port);
+	parport_pc_write_control (port, 0x4);
+	got = parport_pc_epp_read_addr (port, buf, length, flags);
+	frob_set_mode (port, ECR_PS2);
+
+	return got;
+}
+
+static size_t parport_pc_ecpepp_write_addr (struct parport *port,
+					    const void *buf, size_t length,
+					    int flags)
+{
+	size_t written;
+
+	frob_set_mode (port, ECR_EPP);
+	parport_pc_write_control (port, 0x4);
+	parport_pc_data_forward (port);
+	written = parport_pc_epp_write_addr (port, buf, length, flags);
+	frob_set_mode (port, ECR_PS2);
+
+	return written;
+}
+#endif /* IEEE 1284 support */
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+static size_t parport_pc_fifo_write_block_pio (struct parport *port,
+					       const void *buf, size_t length)
+{
+	int ret = 0;
+	const unsigned char *bufp = buf;
+	size_t left = length;
+	unsigned long expire = jiffies + port->physport->cad->timeout;
+	const int fifo = FIFO (port);
+	int poll_for = 8; /* 80 usecs */
+	const struct parport_pc_private *priv = port->physport->private_data;
+	const int fifo_depth = priv->fifo_depth;
+
+	port = port->physport;
+
+	/* We don't want to be interrupted every character. */
+	parport_pc_disable_irq (port);
+	/* set nErrIntrEn and serviceIntr */
+	frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+
+	/* Forward mode. */
+	parport_pc_data_forward (port); /* Must be in PS2 mode */
+
+	while (left) {
+		unsigned char byte;
+		unsigned char ecrval = inb (ECONTROL (port));
+		int i = 0;
+
+		if (need_resched() && time_before (jiffies, expire))
+			/* Can't yield the port. */
+			schedule ();
+
+		/* Anyone else waiting for the port? */
+		if (port->waithead) {
+			printk (KERN_DEBUG "Somebody wants the port\n");
+			break;
+		}
+
+		if (ecrval & 0x02) {
+			/* FIFO is full. Wait for interrupt. */
+
+			/* Clear serviceIntr */
+			ECR_WRITE (port, ecrval & ~(1<<2));
+		false_alarm:
+			ret = parport_wait_event (port, HZ);
+			if (ret < 0) break;
+			ret = 0;
+			if (!time_before (jiffies, expire)) {
+				/* Timed out. */
+				printk (KERN_DEBUG "FIFO write timed out\n");
+				break;
+			}
+			ecrval = inb (ECONTROL (port));
+			if (!(ecrval & (1<<2))) {
+				if (need_resched() &&
+				    time_before (jiffies, expire))
+					schedule ();
+
+				goto false_alarm;
+			}
+
+			continue;
+		}
+
+		/* Can't fail now. */
+		expire = jiffies + port->cad->timeout;
+
+	poll:
+		if (signal_pending (current))
+			break;
+
+		if (ecrval & 0x01) {
+			/* FIFO is empty. Blast it full. */
+			const int n = left < fifo_depth ? left : fifo_depth;
+			outsb (fifo, bufp, n);
+			bufp += n;
+			left -= n;
+
+			/* Adjust the poll time. */
+			if (i < (poll_for - 2)) poll_for--;
+			continue;
+		} else if (i++ < poll_for) {
+			udelay (10);
+			ecrval = inb (ECONTROL (port));
+			goto poll;
+		}
+
+		/* Half-full (call me an optimist) */
+		byte = *bufp++;
+		outb (byte, fifo);
+		left--;
+        }
+
+dump_parport_state ("leave fifo_write_block_pio", port);
+	return length - left;
+}
+
+static size_t parport_pc_fifo_write_block_dma (struct parport *port,
+					       const void *buf, size_t length)
+{
+	int ret = 0;
+	unsigned long dmaflag;
+	size_t left = length;
+	const struct parport_pc_private *priv = port->physport->private_data;
+	dma_addr_t dma_addr, dma_handle;
+	size_t maxlen = 0x10000; /* max 64k per DMA transfer */
+	unsigned long start = (unsigned long) buf;
+	unsigned long end = (unsigned long) buf + length - 1;
+
+dump_parport_state ("enter fifo_write_block_dma", port);
+	if (end < MAX_DMA_ADDRESS) {
+		/* If it would cross a 64k boundary, cap it at the end. */
+		if ((start ^ end) & ~0xffffUL)
+			maxlen = 0x10000 - (start & 0xffff);
+
+		dma_addr = dma_handle = pci_map_single(priv->dev, (void *)buf, length,
+						       PCI_DMA_TODEVICE);
+        } else {
+		/* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
+		maxlen   = PAGE_SIZE;          /* sizeof(priv->dma_buf) */
+		dma_addr = priv->dma_handle;
+		dma_handle = 0;
+	}
+
+	port = port->physport;
+
+	/* We don't want to be interrupted every character. */
+	parport_pc_disable_irq (port);
+	/* set nErrIntrEn and serviceIntr */
+	frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+
+	/* Forward mode. */
+	parport_pc_data_forward (port); /* Must be in PS2 mode */
+
+	while (left) {
+		unsigned long expire = jiffies + port->physport->cad->timeout;
+
+		size_t count = left;
+
+		if (count > maxlen)
+			count = maxlen;
+
+		if (!dma_handle)   /* bounce buffer ! */
+			memcpy(priv->dma_buf, buf, count);
+
+		dmaflag = claim_dma_lock();
+		disable_dma(port->dma);
+		clear_dma_ff(port->dma);
+		set_dma_mode(port->dma, DMA_MODE_WRITE);
+		set_dma_addr(port->dma, dma_addr);
+		set_dma_count(port->dma, count);
+
+		/* Set DMA mode */
+		frob_econtrol (port, 1<<3, 1<<3);
+
+		/* Clear serviceIntr */
+		frob_econtrol (port, 1<<2, 0);
+
+		enable_dma(port->dma);
+		release_dma_lock(dmaflag);
+
+		/* assume DMA will be successful */
+		left -= count;
+		buf  += count;
+		if (dma_handle) dma_addr += count;
+
+		/* Wait for interrupt. */
+	false_alarm:
+		ret = parport_wait_event (port, HZ);
+		if (ret < 0) break;
+		ret = 0;
+		if (!time_before (jiffies, expire)) {
+			/* Timed out. */
+			printk (KERN_DEBUG "DMA write timed out\n");
+			break;
+		}
+		/* Is serviceIntr set? */
+		if (!(inb (ECONTROL (port)) & (1<<2))) {
+			cond_resched();
+
+			goto false_alarm;
+		}
+
+		dmaflag = claim_dma_lock();
+		disable_dma(port->dma);
+		clear_dma_ff(port->dma);
+		count = get_dma_residue(port->dma);
+		release_dma_lock(dmaflag);
+
+		cond_resched(); /* Can't yield the port. */
+
+		/* Anyone else waiting for the port? */
+		if (port->waithead) {
+			printk (KERN_DEBUG "Somebody wants the port\n");
+			break;
+		}
+
+		/* update for possible DMA residue ! */
+		buf  -= count;
+		left += count;
+		if (dma_handle) dma_addr -= count;
+	}
+
+	/* Maybe got here through break, so adjust for DMA residue! */
+	dmaflag = claim_dma_lock();
+	disable_dma(port->dma);
+	clear_dma_ff(port->dma);
+	left += get_dma_residue(port->dma);
+	release_dma_lock(dmaflag);
+
+	/* Turn off DMA mode */
+	frob_econtrol (port, 1<<3, 0);
+	
+	if (dma_handle)
+		pci_unmap_single(priv->dev, dma_handle, length, PCI_DMA_TODEVICE);
+
+dump_parport_state ("leave fifo_write_block_dma", port);
+	return length - left;
+}
+
+/* Parallel Port FIFO mode (ECP chipsets) */
+static size_t parport_pc_compat_write_block_pio (struct parport *port,
+						 const void *buf, size_t length,
+						 int flags)
+{
+	size_t written;
+	int r;
+	unsigned long expire;
+	const struct parport_pc_private *priv = port->physport->private_data;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_write_compat (port, buf,
+						      length, flags);
+
+	/* Set up parallel port FIFO mode.*/
+	parport_pc_data_forward (port); /* Must be in PS2 mode */
+	parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+	r = change_mode (port, ECR_PPF); /* Parallel port FIFO */
+	if (r)  printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name);
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Write the data to the FIFO. */
+	if (port->dma != PARPORT_DMA_NONE)
+		written = parport_pc_fifo_write_block_dma (port, buf, length);
+	else
+		written = parport_pc_fifo_write_block_pio (port, buf, length);
+
+	/* Finish up. */
+	/* For some hardware we don't want to touch the mode until
+	 * the FIFO is empty, so allow 4 seconds for each position
+	 * in the fifo.
+	 */
+        expire = jiffies + (priv->fifo_depth * HZ * 4);
+	do {
+		/* Wait for the FIFO to empty */
+		r = change_mode (port, ECR_PS2);
+		if (r != -EBUSY) {
+			break;
+		}
+	} while (time_before (jiffies, expire));
+	if (r == -EBUSY) {
+
+		printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+
+		/* Prevent further data transfer. */
+		frob_set_mode (port, ECR_TST);
+
+		/* Adjust for the contents of the FIFO. */
+		for (written -= priv->fifo_depth; ; written++) {
+			if (inb (ECONTROL (port)) & 0x2) {
+				/* Full up. */
+				break;
+			}
+			outb (0, FIFO (port));
+		}
+
+		/* Reset the FIFO and return to PS2 mode. */
+		frob_set_mode (port, ECR_PS2);
+	}
+
+	r = parport_wait_peripheral (port,
+				     PARPORT_STATUS_BUSY,
+				     PARPORT_STATUS_BUSY);
+	if (r)
+		printk (KERN_DEBUG
+			"%s: BUSY timeout (%d) in compat_write_block_pio\n", 
+			port->name, r);
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+/* ECP */
+#ifdef CONFIG_PARPORT_1284
+static size_t parport_pc_ecp_write_block_pio (struct parport *port,
+					      const void *buf, size_t length,
+					      int flags)
+{
+	size_t written;
+	int r;
+	unsigned long expire;
+	const struct parport_pc_private *priv = port->physport->private_data;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_ecp_write_data (port, buf,
+							length, flags);
+
+	/* Switch to forward mode if necessary. */
+	if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+		/* Event 47: Set nInit high. */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_INIT
+				      | PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_INIT
+				      | PARPORT_CONTROL_AUTOFD);
+
+		/* Event 49: PError goes high. */
+		r = parport_wait_peripheral (port,
+					     PARPORT_STATUS_PAPEROUT,
+					     PARPORT_STATUS_PAPEROUT);
+		if (r) {
+			printk (KERN_DEBUG "%s: PError timeout (%d) "
+				"in ecp_write_block_pio\n", port->name, r);
+		}
+	}
+
+	/* Set up ECP parallel port mode.*/
+	parport_pc_data_forward (port); /* Must be in PS2 mode */
+	parport_pc_frob_control (port,
+				 PARPORT_CONTROL_STROBE |
+				 PARPORT_CONTROL_AUTOFD,
+				 0);
+	r = change_mode (port, ECR_ECP); /* ECP FIFO */
+	if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Write the data to the FIFO. */
+	if (port->dma != PARPORT_DMA_NONE)
+		written = parport_pc_fifo_write_block_dma (port, buf, length);
+	else
+		written = parport_pc_fifo_write_block_pio (port, buf, length);
+
+	/* Finish up. */
+	/* For some hardware we don't want to touch the mode until
+	 * the FIFO is empty, so allow 4 seconds for each position
+	 * in the fifo.
+	 */
+	expire = jiffies + (priv->fifo_depth * (HZ * 4));
+	do {
+		/* Wait for the FIFO to empty */
+		r = change_mode (port, ECR_PS2);
+		if (r != -EBUSY) {
+			break;
+		}
+	} while (time_before (jiffies, expire));
+	if (r == -EBUSY) {
+
+		printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+
+		/* Prevent further data transfer. */
+		frob_set_mode (port, ECR_TST);
+
+		/* Adjust for the contents of the FIFO. */
+		for (written -= priv->fifo_depth; ; written++) {
+			if (inb (ECONTROL (port)) & 0x2) {
+				/* Full up. */
+				break;
+			}
+			outb (0, FIFO (port));
+		}
+
+		/* Reset the FIFO and return to PS2 mode. */
+		frob_set_mode (port, ECR_PS2);
+
+		/* Host transfer recovery. */
+		parport_pc_data_reverse (port); /* Must be in PS2 mode */
+		udelay (5);
+		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+		r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+		if (r)
+			printk (KERN_DEBUG "%s: PE,1 timeout (%d) "
+				"in ecp_write_block_pio\n", port->name, r);
+
+		parport_frob_control (port,
+				      PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_INIT);
+		r = parport_wait_peripheral (port,
+					     PARPORT_STATUS_PAPEROUT,
+					     PARPORT_STATUS_PAPEROUT);
+                if (r)
+                        printk (KERN_DEBUG "%s: PE,2 timeout (%d) "
+				"in ecp_write_block_pio\n", port->name, r);
+	}
+
+	r = parport_wait_peripheral (port,
+				     PARPORT_STATUS_BUSY, 
+				     PARPORT_STATUS_BUSY);
+	if(r)
+		printk (KERN_DEBUG
+			"%s: BUSY timeout (%d) in ecp_write_block_pio\n",
+			port->name, r);
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+#if 0
+static size_t parport_pc_ecp_read_block_pio (struct parport *port,
+					     void *buf, size_t length,
+					     int flags)
+{
+	size_t left = length;
+	size_t fifofull;
+	int r;
+	const int fifo = FIFO(port);
+	const struct parport_pc_private *priv = port->physport->private_data;
+	const int fifo_depth = priv->fifo_depth;
+	char *bufp = buf;
+
+	port = port->physport;
+DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+dump_parport_state ("enter fcn", port);
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_ecp_read_data (port, buf,
+						       length, flags);
+
+	if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
+		/* If the peripheral is allowed to send RLE compressed
+		 * data, it is possible for a byte to expand to 128
+		 * bytes in the FIFO. */
+		fifofull = 128;
+	} else {
+		fifofull = fifo_depth;
+	}
+
+	/* If the caller wants less than a full FIFO's worth of data,
+	 * go through software emulation.  Otherwise we may have to throw
+	 * away data. */
+	if (length < fifofull)
+		return parport_ieee1284_ecp_read_data (port, buf,
+						       length, flags);
+
+	if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
+		/* change to reverse-idle phase (must be in forward-idle) */
+
+		/* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD
+				      | PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_AUTOFD);
+		parport_pc_data_reverse (port); /* Must be in PS2 mode */
+		udelay (5);
+		/* Event 39: Set nInit low to initiate bus reversal */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_INIT,
+				      0);
+		/* Event 40: Wait for  nAckReverse (PError) to go low */
+		r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+                if (r) {
+                        printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) "
+				"in ecp_read_block_pio\n", port->name, r);
+			return 0;
+		}
+	}
+
+	/* Set up ECP FIFO mode.*/
+/*	parport_pc_frob_control (port,
+				 PARPORT_CONTROL_STROBE |
+				 PARPORT_CONTROL_AUTOFD,
+				 PARPORT_CONTROL_AUTOFD); */
+	r = change_mode (port, ECR_ECP); /* ECP FIFO */
+	if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+
+	port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+
+	/* the first byte must be collected manually */
+dump_parport_state ("pre 43", port);
+	/* Event 43: Wait for nAck to go low */
+	r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+	if (r) {
+		/* timed out while reading -- no data */
+		printk (KERN_DEBUG "PIO read timed out (initial byte)\n");
+		goto out_no_data;
+	}
+	/* read byte */
+	*bufp++ = inb (DATA (port));
+	left--;
+dump_parport_state ("43-44", port);
+	/* Event 44: nAutoFd (HostAck) goes high to acknowledge */
+	parport_pc_frob_control (port,
+				 PARPORT_CONTROL_AUTOFD,
+				 0);
+dump_parport_state ("pre 45", port);
+	/* Event 45: Wait for nAck to go high */
+/*	r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */
+dump_parport_state ("post 45", port);
+r = 0;
+	if (r) {
+		/* timed out while waiting for peripheral to respond to ack */
+		printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
+
+		/* keep hold of the byte we've got already */
+		goto out_no_data;
+	}
+	/* Event 46: nAutoFd (HostAck) goes low to accept more data */
+	parport_pc_frob_control (port,
+				 PARPORT_CONTROL_AUTOFD,
+				 PARPORT_CONTROL_AUTOFD);
+
+
+dump_parport_state ("rev idle", port);
+	/* Do the transfer. */
+	while (left > fifofull) {
+		int ret;
+		unsigned long expire = jiffies + port->cad->timeout;
+		unsigned char ecrval = inb (ECONTROL (port));
+
+		if (need_resched() && time_before (jiffies, expire))
+			/* Can't yield the port. */
+			schedule ();
+
+		/* At this point, the FIFO may already be full. In
+                 * that case ECP is already holding back the
+                 * peripheral (assuming proper design) with a delayed
+                 * handshake.  Work fast to avoid a peripheral
+                 * timeout.  */
+
+		if (ecrval & 0x01) {
+			/* FIFO is empty. Wait for interrupt. */
+dump_parport_state ("FIFO empty", port);
+
+			/* Anyone else waiting for the port? */
+			if (port->waithead) {
+				printk (KERN_DEBUG "Somebody wants the port\n");
+				break;
+			}
+
+			/* Clear serviceIntr */
+			ECR_WRITE (port, ecrval & ~(1<<2));
+		false_alarm:
+dump_parport_state ("waiting", port);
+			ret = parport_wait_event (port, HZ);
+DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret);
+			if (ret < 0)
+				break;
+			ret = 0;
+			if (!time_before (jiffies, expire)) {
+				/* Timed out. */
+dump_parport_state ("timeout", port);
+				printk (KERN_DEBUG "PIO read timed out\n");
+				break;
+			}
+			ecrval = inb (ECONTROL (port));
+			if (!(ecrval & (1<<2))) {
+				if (need_resched() &&
+				    time_before (jiffies, expire)) {
+					schedule ();
+				}
+				goto false_alarm;
+			}
+
+			/* Depending on how the FIFO threshold was
+                         * set, how long interrupt service took, and
+                         * how fast the peripheral is, we might be
+                         * lucky and have a just filled FIFO. */
+			continue;
+		}
+
+		if (ecrval & 0x02) {
+			/* FIFO is full. */
+dump_parport_state ("FIFO full", port);
+			insb (fifo, bufp, fifo_depth);
+			bufp += fifo_depth;
+			left -= fifo_depth;
+			continue;
+		}
+
+DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+
+		/* FIFO not filled.  We will cycle this loop for a while
+                 * and either the peripheral will fill it faster,
+                 * tripping a fast empty with insb, or we empty it. */
+		*bufp++ = inb (fifo);
+		left--;
+	}
+
+	/* scoop up anything left in the FIFO */
+	while (left && !(inb (ECONTROL (port) & 0x01))) {
+		*bufp++ = inb (fifo);
+		left--;
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+dump_parport_state ("rev idle2", port);
+
+out_no_data:
+
+	/* Go to forward idle mode to shut the peripheral up (event 47). */
+	parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
+
+	/* event 49: PError goes high */
+	r = parport_wait_peripheral (port,
+				     PARPORT_STATUS_PAPEROUT,
+				     PARPORT_STATUS_PAPEROUT);
+	if (r) {
+		printk (KERN_DEBUG
+			"%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
+			port->name, r);
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	/* Finish up. */
+	{
+		int lost = get_fifo_residue (port);
+		if (lost)
+			/* Shouldn't happen with compliant peripherals. */
+			printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
+				port->name, lost);
+	}
+
+dump_parport_state ("fwd idle", port);
+	return length - left;
+}
+#endif  /*  0  */
+#endif /* IEEE 1284 support */
+#endif /* Allowed to use FIFO/DMA */
+
+
+/*
+ *	******************************************
+ *	INITIALISATION AND MODULE STUFF BELOW HERE
+ *	******************************************
+ */
+
+/* GCC is not inlining extern inline function later overwriten to non-inline,
+   so we use outlined_ variants here.  */
+static struct parport_operations parport_pc_ops =
+{
+	.write_data	= parport_pc_write_data,
+	.read_data	= parport_pc_read_data,
+
+	.write_control	= parport_pc_write_control,
+	.read_control	= parport_pc_read_control,
+	.frob_control	= parport_pc_frob_control,
+
+	.read_status	= parport_pc_read_status,
+
+	.enable_irq	= parport_pc_enable_irq,
+	.disable_irq	= parport_pc_disable_irq,
+
+	.data_forward	= parport_pc_data_forward,
+	.data_reverse	= parport_pc_data_reverse,
+
+	.init_state	= parport_pc_init_state,
+	.save_state	= parport_pc_save_state,
+	.restore_state	= parport_pc_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+#ifdef CONFIG_PARPORT_PC_SUPERIO
+/* Super-IO chipset detection, Winbond, SMSC */
+static void __devinit show_parconfig_smsc37c669(int io, int key)
+{
+	int cr1,cr4,cra,cr23,cr26,cr27,i=0;
+	static const char *modes[]={ "SPP and Bidirectional (PS/2)",	
+				     "EPP and SPP",
+				     "ECP",
+				     "ECP and EPP" };
+
+	outb(key,io);
+	outb(key,io);
+	outb(1,io);
+	cr1=inb(io+1);
+	outb(4,io);
+	cr4=inb(io+1);
+	outb(0x0a,io);
+	cra=inb(io+1);
+	outb(0x23,io);
+	cr23=inb(io+1);
+	outb(0x26,io);
+	cr26=inb(io+1);
+	outb(0x27,io);
+	cr27=inb(io+1);
+	outb(0xaa,io);
+
+	if (verbose_probing) {
+		printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
+			"A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
+			cr1,cr4,cra,cr23,cr26,cr27);
+		
+		/* The documentation calls DMA and IRQ-Lines by letters, so
+		   the board maker can/will wire them
+		   appropriately/randomly...  G=reserved H=IDE-irq, */
+		printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, "
+			"fifo threshold=%d\n", cr23*4,
+			(cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-',
+			(cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f);
+		printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
+		       (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no");
+		printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+		       (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], 
+		       (cr4 & 0x40) ? "1.7" : "1.9");
+	}
+		
+	/* Heuristics !  BIOS setup for this mainboard device limits
+	   the choices to standard settings, i.e. io-address and IRQ
+	   are related, however DMA can be 1 or 3, assume DMA_A=DMA1,
+	   DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */
+	if(cr23*4 >=0x100) { /* if active */
+		while((superios[i].io!= 0) && (i<NR_SUPERIOS))
+			i++;
+		if(i==NR_SUPERIOS)
+			printk(KERN_INFO "Super-IO: too many chips!\n");
+		else {
+			int d;
+			switch (cr23*4) {
+				case 0x3bc:
+					superios[i].io = 0x3bc;
+					superios[i].irq = 7;
+					break;
+				case 0x378:
+					superios[i].io = 0x378;
+					superios[i].irq = 7;
+					break;
+				case 0x278:
+					superios[i].io = 0x278;
+					superios[i].irq = 5;
+			}
+			d=(cr26 &0x0f);
+			if((d==1) || (d==3)) 
+				superios[i].dma= d;
+			else
+				superios[i].dma= PARPORT_DMA_NONE;
+		}
+ 	}
+}
+
+
+static void __devinit show_parconfig_winbond(int io, int key)
+{
+	int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
+	static const char *modes[] = {
+		"Standard (SPP) and Bidirectional(PS/2)", /* 0 */
+		"EPP-1.9 and SPP",
+		"ECP",
+		"ECP and EPP-1.9",
+		"Standard (SPP)",
+		"EPP-1.7 and SPP",		/* 5 */
+		"undefined!",
+		"ECP and EPP-1.7" };
+	static char *irqtypes[] = { "pulsed low, high-Z", "follows nACK" };
+		
+	/* The registers are called compatible-PnP because the
+           register layout is modelled after ISA-PnP, the access
+           method is just another ... */
+	outb(key,io);
+	outb(key,io);
+	outb(0x07,io);   /* Register 7: Select Logical Device */
+	outb(0x01,io+1); /* LD1 is Parallel Port */
+	outb(0x30,io);
+	cr30=inb(io+1);
+	outb(0x60,io);
+	cr60=inb(io+1);
+	outb(0x61,io);
+	cr61=inb(io+1);
+	outb(0x70,io);
+	cr70=inb(io+1);
+	outb(0x74,io);
+	cr74=inb(io+1);
+	outb(0xf0,io);
+	crf0=inb(io+1);
+	outb(0xaa,io);
+
+	if (verbose_probing) {
+		printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x "
+		       "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0);
+		printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", 
+		       (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f );
+		if ((cr74 & 0x07) > 3)
+			printk("dma=none\n");
+		else
+			printk("dma=%d\n",cr74 & 0x07);
+		printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+		       irqtypes[crf0>>7], (crf0>>3)&0x0f);
+		printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]);
+	}
+
+	if(cr30 & 0x01) { /* the settings can be interrogated later ... */
+		while((superios[i].io!= 0) && (i<NR_SUPERIOS))
+			i++;
+		if(i==NR_SUPERIOS) 
+			printk(KERN_INFO "Super-IO: too many chips!\n");
+		else {
+			superios[i].io = (cr60<<8)|cr61;
+			superios[i].irq = cr70&0x0f;
+			superios[i].dma = (((cr74 & 0x07) > 3) ?
+					   PARPORT_DMA_NONE : (cr74 & 0x07));
+		}
+	}
+}
+
+static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid)
+{
+	const char *type = "unknown";
+	int id,progif=2;
+
+	if (devid == devrev)
+		/* simple heuristics, we happened to read some
+                   non-winbond register */
+		return;
+
+	id=(devid<<8) | devrev;
+
+	/* Values are from public data sheets pdf files, I can just
+           confirm 83977TF is correct :-) */
+	if      (id == 0x9771) type="83977F/AF";
+	else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x";
+	else if (id == 0x9774) type="83977ATF";
+	else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x";
+	else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x";
+	else if ((id & ~0x0f) == 0x5210) type="83627";
+	else if ((id & ~0x0f) == 0x6010) type="83697HF";
+	else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;}
+	else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;}
+	else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;}
+	else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;}
+	else progif=0;
+
+	if (verbose_probing)
+		printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
+		       "devid=%02x devrev=%02x oldid=%02x type=%s\n", 
+		       efer, key, devid, devrev, oldid, type);
+
+	if (progif == 2)
+		show_parconfig_winbond(efer,key);
+}
+
+static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
+{
+        const char *type = "unknown";
+	void (*func)(int io, int key);
+        int id;
+
+        if (devid == devrev)
+		/* simple heuristics, we happened to read some
+                   non-smsc register */
+		return;
+
+	func=NULL;
+        id=(devid<<8) | devrev;
+
+	if	(id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;}
+	else if	(id==0x6582) type="37c665IR";
+	else if	(devid==0x65) type="37c665GT";
+	else if	(devid==0x66) type="37c666GT";
+
+	if (verbose_probing)
+		printk(KERN_INFO "SMSC chip at EFER=0x%x "
+		       "key=0x%02x devid=%02x devrev=%02x type=%s\n",
+		       efer, key, devid, devrev, type);
+
+	if (func)
+		func(efer,key);
+}
+
+
+static void __devinit winbond_check(int io, int key)
+{
+	int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+
+	if (!request_region(io, 3, __FUNCTION__))
+		return;
+
+	/* First probe without key */
+	outb(0x20,io);
+	x_devid=inb(io+1);
+	outb(0x21,io);
+	x_devrev=inb(io+1);
+	outb(0x09,io);
+	x_oldid=inb(io+1);
+
+	outb(key,io);
+	outb(key,io);     /* Write Magic Sequence to EFER, extended
+                             funtion enable register */
+	outb(0x20,io);    /* Write EFIR, extended function index register */
+	devid=inb(io+1);  /* Read EFDR, extended function data register */
+	outb(0x21,io);
+	devrev=inb(io+1);
+	outb(0x09,io);
+	oldid=inb(io+1);
+	outb(0xaa,io);    /* Magic Seal */
+
+	if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+		goto out; /* protection against false positives */
+
+	decode_winbond(io,key,devid,devrev,oldid);
+out:
+	release_region(io, 3);
+}
+
+static void __devinit winbond_check2(int io,int key)
+{
+        int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+
+	if (!request_region(io, 3, __FUNCTION__))
+		return;
+
+	/* First probe without the key */
+	outb(0x20,io+2);
+	x_devid=inb(io+2);
+	outb(0x21,io+1);
+	x_devrev=inb(io+2);
+	outb(0x09,io+1);
+	x_oldid=inb(io+2);
+
+        outb(key,io);     /* Write Magic Byte to EFER, extended
+                             funtion enable register */
+        outb(0x20,io+2);  /* Write EFIR, extended function index register */
+        devid=inb(io+2);  /* Read EFDR, extended function data register */
+        outb(0x21,io+1);
+        devrev=inb(io+2);
+        outb(0x09,io+1);
+        oldid=inb(io+2);
+        outb(0xaa,io);    /* Magic Seal */
+
+	if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+		goto out; /* protection against false positives */
+
+	decode_winbond(io,key,devid,devrev,oldid);
+out:
+	release_region(io, 3);
+}
+
+static void __devinit smsc_check(int io, int key)
+{
+        int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev;
+
+	if (!request_region(io, 3, __FUNCTION__))
+		return;
+
+	/* First probe without the key */
+	outb(0x0d,io);
+	x_oldid=inb(io+1);
+	outb(0x0e,io);
+	x_oldrev=inb(io+1);
+	outb(0x20,io);
+	x_id=inb(io+1);
+	outb(0x21,io);
+	x_rev=inb(io+1);
+
+        outb(key,io);
+        outb(key,io);     /* Write Magic Sequence to EFER, extended
+                             funtion enable register */
+        outb(0x0d,io);    /* Write EFIR, extended function index register */
+        oldid=inb(io+1);  /* Read EFDR, extended function data register */
+        outb(0x0e,io);
+        oldrev=inb(io+1);
+	outb(0x20,io);
+	id=inb(io+1);
+	outb(0x21,io);
+	rev=inb(io+1);
+        outb(0xaa,io);    /* Magic Seal */
+
+	if ((x_id == id) && (x_oldrev == oldrev) &&
+	    (x_oldid == oldid) && (x_rev == rev))
+		goto out; /* protection against false positives */
+
+        decode_smsc(io,key,oldid,oldrev);
+out:
+	release_region(io, 3);
+}
+
+
+static void __devinit detect_and_report_winbond (void)
+{ 
+	if (verbose_probing)
+		printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
+	winbond_check(0x3f0,0x87);
+	winbond_check(0x370,0x87);
+	winbond_check(0x2e ,0x87);
+	winbond_check(0x4e ,0x87);
+	winbond_check(0x3f0,0x86);
+	winbond_check2(0x250,0x88); 
+	winbond_check2(0x250,0x89);
+}
+
+static void __devinit detect_and_report_smsc (void)
+{
+	if (verbose_probing)
+		printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
+	smsc_check(0x3f0,0x55);
+	smsc_check(0x370,0x55);
+	smsc_check(0x3f0,0x44);
+	smsc_check(0x370,0x44);
+}
+#endif /* CONFIG_PARPORT_PC_SUPERIO */
+
+static int __devinit get_superio_dma (struct parport *p)
+{
+	int i=0;
+	while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
+		i++;
+	if (i!=NR_SUPERIOS)
+		return superios[i].dma;
+	return PARPORT_DMA_NONE;
+}
+
+static int __devinit get_superio_irq (struct parport *p)
+{
+	int i=0;
+        while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
+                i++;
+        if (i!=NR_SUPERIOS)
+                return superios[i].irq;
+        return PARPORT_IRQ_NONE;
+}
+	
+
+/* --- Mode detection ------------------------------------- */
+
+/*
+ * Checks for port existence, all ports support SPP MODE
+ * Returns: 
+ *         0           :  No parallel port at this address
+ *  PARPORT_MODE_PCSPP :  SPP port detected 
+ *                        (if the user specified an ioport himself,
+ *                         this shall always be the case!)
+ *
+ */
+static int __devinit parport_SPP_supported(struct parport *pb)
+{
+	unsigned char r, w;
+
+	/*
+	 * first clear an eventually pending EPP timeout 
+	 * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
+	 * that does not even respond to SPP cycles if an EPP
+	 * timeout is pending
+	 */
+	clear_epp_timeout(pb);
+
+	/* Do a simple read-write test to make sure the port exists. */
+	w = 0xc;
+	outb (w, CONTROL (pb));
+
+	/* Is there a control register that we can read from?  Some
+	 * ports don't allow reads, so read_control just returns a
+	 * software copy. Some ports _do_ allow reads, so bypass the
+	 * software copy here.  In addition, some bits aren't
+	 * writable. */
+	r = inb (CONTROL (pb));
+	if ((r & 0xf) == w) {
+		w = 0xe;
+		outb (w, CONTROL (pb));
+		r = inb (CONTROL (pb));
+		outb (0xc, CONTROL (pb));
+		if ((r & 0xf) == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	if (user_specified)
+		/* That didn't work, but the user thinks there's a
+		 * port here. */
+		printk (KERN_INFO "parport 0x%lx (WARNING): CTR: "
+			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+
+	/* Try the data register.  The data lines aren't tri-stated at
+	 * this stage, so we expect back what we wrote. */
+	w = 0xaa;
+	parport_pc_write_data (pb, w);
+	r = parport_pc_read_data (pb);
+	if (r == w) {
+		w = 0x55;
+		parport_pc_write_data (pb, w);
+		r = parport_pc_read_data (pb);
+		if (r == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	if (user_specified) {
+		/* Didn't work, but the user is convinced this is the
+		 * place. */
+		printk (KERN_INFO "parport 0x%lx (WARNING): DATA: "
+			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+		printk (KERN_INFO "parport 0x%lx: You gave this address, "
+			"but there is probably no parallel port there!\n",
+			pb->base);
+	}
+
+	/* It's possible that we can't read the control register or
+	 * the data register.  In that case just believe the user. */
+	if (user_specified)
+		return PARPORT_MODE_PCSPP;
+
+	return 0;
+}
+
+/* Check for ECR
+ *
+ * Old style XT ports alias io ports every 0x400, hence accessing ECR
+ * on these cards actually accesses the CTR.
+ *
+ * Modern cards don't do this but reading from ECR will return 0xff
+ * regardless of what is written here if the card does NOT support
+ * ECP.
+ *
+ * We first check to see if ECR is the same as CTR.  If not, the low
+ * two bits of ECR aren't writable, so we check by writing ECR and
+ * reading it back to see if it's what we expect.
+ */
+static int __devinit parport_ECR_present(struct parport *pb)
+{
+	struct parport_pc_private *priv = pb->private_data;
+	unsigned char r = 0xc;
+
+	outb (r, CONTROL (pb));
+	if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) {
+		outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */
+
+		r = inb (CONTROL (pb));
+		if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2))
+			goto no_reg; /* Sure that no ECR register exists */
+	}
+	
+	if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1)
+		goto no_reg;
+
+	ECR_WRITE (pb, 0x34);
+	if (inb (ECONTROL (pb)) != 0x35)
+		goto no_reg;
+
+	priv->ecr = 1;
+	outb (0xc, CONTROL (pb));
+	
+	/* Go to mode 000 */
+	frob_set_mode (pb, ECR_SPP);
+
+	return 1;
+
+ no_reg:
+	outb (0xc, CONTROL (pb));
+	return 0; 
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Detect PS/2 support.
+ *
+ * Bit 5 (0x20) sets the PS/2 data direction; setting this high
+ * allows us to read data from the data lines.  In theory we would get back
+ * 0xff but any peripheral attached to the port may drag some or all of the
+ * lines down to zero.  So if we get back anything that isn't the contents
+ * of the data register we deem PS/2 support to be present. 
+ *
+ * Some SPP ports have "half PS/2" ability - you can't turn off the line
+ * drivers, but an external peripheral with sufficiently beefy drivers of
+ * its own can overpower them and assert its own levels onto the bus, from
+ * where they can then be read back as normal.  Ports with this property
+ * and the right type of device attached are likely to fail the SPP test,
+ * (as they will appear to have stuck bits) and so the fact that they might
+ * be misdetected here is rather academic. 
+ */
+
+static int __devinit parport_PS2_supported(struct parport *pb)
+{
+	int ok = 0;
+  
+	clear_epp_timeout(pb);
+
+	/* try to tri-state the buffer */
+	parport_pc_data_reverse (pb);
+	
+	parport_pc_write_data(pb, 0x55);
+	if (parport_pc_read_data(pb) != 0x55) ok++;
+
+	parport_pc_write_data(pb, 0xaa);
+	if (parport_pc_read_data(pb) != 0xaa) ok++;
+
+	/* cancel input mode */
+	parport_pc_data_forward (pb);
+
+	if (ok) {
+		pb->modes |= PARPORT_MODE_TRISTATE;
+	} else {
+		struct parport_pc_private *priv = pb->private_data;
+		priv->ctr_writable &= ~0x20;
+	}
+
+	return ok;
+}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+static int __devinit parport_ECP_supported(struct parport *pb)
+{
+	int i;
+	int config, configb;
+	int pword;
+	struct parport_pc_private *priv = pb->private_data;
+	/* Translate ECP intrLine to ISA irq value */	
+	static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 }; 
+
+	/* If there is no ECR, we have no hope of supporting ECP. */
+	if (!priv->ecr)
+		return 0;
+
+	/* Find out FIFO depth */
+	ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */
+	for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++)
+		outb (0xaa, FIFO (pb));
+
+	/*
+	 * Using LGS chipset it uses ECR register, but
+	 * it doesn't support ECP or FIFO MODE
+	 */
+	if (i == 1024) {
+		ECR_WRITE (pb, ECR_SPP << 5);
+		return 0;
+	}
+
+	priv->fifo_depth = i;
+	if (verbose_probing)
+		printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+
+	/* Find out writeIntrThreshold */
+	frob_econtrol (pb, 1<<2, 1<<2);
+	frob_econtrol (pb, 1<<2, 0);
+	for (i = 1; i <= priv->fifo_depth; i++) {
+		inb (FIFO (pb));
+		udelay (50);
+		if (inb (ECONTROL (pb)) & (1<<2))
+			break;
+	}
+
+	if (i <= priv->fifo_depth) {
+		if (verbose_probing)
+			printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+				pb->base, i);
+	} else
+		/* Number of bytes we know we can write if we get an
+                   interrupt. */
+		i = 0;
+
+	priv->writeIntrThreshold = i;
+
+	/* Find out readIntrThreshold */
+	frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */
+	parport_pc_data_reverse (pb); /* Must be in PS2 mode */
+	frob_set_mode (pb, ECR_TST); /* Test FIFO */
+	frob_econtrol (pb, 1<<2, 1<<2);
+	frob_econtrol (pb, 1<<2, 0);
+	for (i = 1; i <= priv->fifo_depth; i++) {
+		outb (0xaa, FIFO (pb));
+		if (inb (ECONTROL (pb)) & (1<<2))
+			break;
+	}
+
+	if (i <= priv->fifo_depth) {
+		if (verbose_probing)
+			printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+				pb->base, i);
+	} else
+		/* Number of bytes we can read if we get an interrupt. */
+		i = 0;
+
+	priv->readIntrThreshold = i;
+
+	ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE (pb, 0xf4); /* Configuration mode */
+	config = inb (CONFIGA (pb));
+	pword = (config >> 4) & 0x7;
+	switch (pword) {
+	case 0:
+		pword = 2;
+		printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+			pb->base);
+		break;
+	case 2:
+		pword = 4;
+		printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+			pb->base);
+		break;
+	default:
+		printk (KERN_WARNING "0x%lx: Unknown implementation ID\n",
+			pb->base);
+		/* Assume 1 */
+	case 1:
+		pword = 1;
+	}
+	priv->pword = pword;
+
+	if (verbose_probing) {
+		printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword);
+		
+		printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
+			config & 0x80 ? "Level" : "Pulses");
+
+		configb = inb (CONFIGB (pb));
+		printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+			pb->base, config, configb);
+		printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+		if ((configb >>3) & 0x07)
+			printk("%d",intrline[(configb >>3) & 0x07]);
+		else
+			printk("<none or set by other means>");
+		printk (" dma=");
+		if( (configb & 0x03 ) == 0x00)
+			printk("<none or set by other means>\n");
+		else
+			printk("%d\n",configb & 0x07);
+	}
+
+	/* Go back to mode 000 */
+	frob_set_mode (pb, ECR_SPP);
+
+	return 1;
+}
+#endif
+
+static int __devinit parport_ECPPS2_supported(struct parport *pb)
+{
+	const struct parport_pc_private *priv = pb->private_data;
+	int result;
+	unsigned char oecr;
+
+	if (!priv->ecr)
+		return 0;
+
+	oecr = inb (ECONTROL (pb));
+	ECR_WRITE (pb, ECR_PS2 << 5);
+	result = parport_PS2_supported(pb);
+	ECR_WRITE (pb, oecr);
+	return result;
+}
+
+/* EPP mode detection  */
+
+static int __devinit parport_EPP_supported(struct parport *pb)
+{
+	const struct parport_pc_private *priv = pb->private_data;
+
+	/*
+	 * Theory:
+	 *	Bit 0 of STR is the EPP timeout bit, this bit is 0
+	 *	when EPP is possible and is set high when an EPP timeout
+	 *	occurs (EPP uses the HALT line to stop the CPU while it does
+	 *	the byte transfer, an EPP timeout occurs if the attached
+	 *	device fails to respond after 10 micro seconds).
+	 *
+	 *	This bit is cleared by either reading it (National Semi)
+	 *	or writing a 1 to the bit (SMC, UMC, WinBond), others ???
+	 *	This bit is always high in non EPP modes.
+	 */
+
+	/* If EPP timeout bit clear then EPP available */
+	if (!clear_epp_timeout(pb)) {
+		return 0;  /* No way to clear timeout */
+	}
+
+	/* Check for Intel bug. */
+	if (priv->ecr) {
+		unsigned char i;
+		for (i = 0x00; i < 0x80; i += 0x20) {
+			ECR_WRITE (pb, i);
+			if (clear_epp_timeout (pb)) {
+				/* Phony EPP in ECP. */
+				return 0;
+			}
+		}
+	}
+
+	pb->modes |= PARPORT_MODE_EPP;
+
+	/* Set up access functions to use EPP hardware. */
+	pb->ops->epp_read_data = parport_pc_epp_read_data;
+	pb->ops->epp_write_data = parport_pc_epp_write_data;
+	pb->ops->epp_read_addr = parport_pc_epp_read_addr;
+	pb->ops->epp_write_addr = parport_pc_epp_write_addr;
+
+	return 1;
+}
+
+static int __devinit parport_ECPEPP_supported(struct parport *pb)
+{
+	struct parport_pc_private *priv = pb->private_data;
+	int result;
+	unsigned char oecr;
+
+	if (!priv->ecr) {
+		return 0;
+	}
+
+	oecr = inb (ECONTROL (pb));
+	/* Search for SMC style EPP+ECP mode */
+	ECR_WRITE (pb, 0x80);
+	outb (0x04, CONTROL (pb));
+	result = parport_EPP_supported(pb);
+
+	ECR_WRITE (pb, oecr);
+
+	if (result) {
+		/* Set up access functions to use ECP+EPP hardware. */
+		pb->ops->epp_read_data = parport_pc_ecpepp_read_data;
+		pb->ops->epp_write_data = parport_pc_ecpepp_write_data;
+		pb->ops->epp_read_addr = parport_pc_ecpepp_read_addr;
+		pb->ops->epp_write_addr = parport_pc_ecpepp_write_addr;
+	}
+
+	return result;
+}
+
+#else /* No IEEE 1284 support */
+
+/* Don't bother probing for modes we know we won't use. */
+static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
+#ifdef CONFIG_PARPORT_PC_FIFO
+static int __devinit parport_ECP_supported(struct parport *pb) { return 0; }
+#endif
+static int __devinit parport_EPP_supported(struct parport *pb) { return 0; }
+static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;}
+static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
+
+#endif /* No IEEE 1284 support */
+
+/* --- IRQ detection -------------------------------------- */
+
+/* Only if supports ECP mode */
+static int __devinit programmable_irq_support(struct parport *pb)
+{
+	int irq, intrLine;
+	unsigned char oecr = inb (ECONTROL (pb));
+	static const int lookup[8] = {
+		PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
+	};
+
+	ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
+
+	intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+	irq = lookup[intrLine];
+
+	ECR_WRITE (pb, oecr);
+	return irq;
+}
+
+static int __devinit irq_probe_ECP(struct parport *pb)
+{
+	int i;
+	unsigned long irqs;
+
+	irqs = probe_irq_on();
+		
+	ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE (pb, (ECR_TST << 5) | 0x04);
+	ECR_WRITE (pb, ECR_TST << 5);
+
+	/* If Full FIFO sure that writeIntrThreshold is generated */
+	for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++) 
+		outb (0xaa, FIFO (pb));
+		
+	pb->irq = probe_irq_off(irqs);
+	ECR_WRITE (pb, ECR_SPP << 5);
+
+	if (pb->irq <= 0)
+		pb->irq = PARPORT_IRQ_NONE;
+
+	return pb->irq;
+}
+
+/*
+ * This detection seems that only works in National Semiconductors
+ * This doesn't work in SMC, LGS, and Winbond 
+ */
+static int __devinit irq_probe_EPP(struct parport *pb)
+{
+#ifndef ADVANCED_DETECT
+	return PARPORT_IRQ_NONE;
+#else
+	int irqs;
+	unsigned char oecr;
+
+	if (pb->modes & PARPORT_MODE_PCECR)
+		oecr = inb (ECONTROL (pb));
+
+	irqs = probe_irq_on();
+
+	if (pb->modes & PARPORT_MODE_PCECR)
+		frob_econtrol (pb, 0x10, 0x10);
+	
+	clear_epp_timeout(pb);
+	parport_pc_frob_control (pb, 0x20, 0x20);
+	parport_pc_frob_control (pb, 0x10, 0x10);
+	clear_epp_timeout(pb);
+
+	/* Device isn't expecting an EPP read
+	 * and generates an IRQ.
+	 */
+	parport_pc_read_epp(pb);
+	udelay(20);
+
+	pb->irq = probe_irq_off (irqs);
+	if (pb->modes & PARPORT_MODE_PCECR)
+		ECR_WRITE (pb, oecr);
+	parport_pc_write_control(pb, 0xc);
+
+	if (pb->irq <= 0)
+		pb->irq = PARPORT_IRQ_NONE;
+
+	return pb->irq;
+#endif /* Advanced detection */
+}
+
+static int __devinit irq_probe_SPP(struct parport *pb)
+{
+	/* Don't even try to do this. */
+	return PARPORT_IRQ_NONE;
+}
+
+/* We will attempt to share interrupt requests since other devices
+ * such as sound cards and network cards seem to like using the
+ * printer IRQs.
+ *
+ * When ECP is available we can autoprobe for IRQs.
+ * NOTE: If we can autoprobe it, we can register the IRQ.
+ */
+static int __devinit parport_irq_probe(struct parport *pb)
+{
+	struct parport_pc_private *priv = pb->private_data;
+
+	if (priv->ecr) {
+		pb->irq = programmable_irq_support(pb);
+
+		if (pb->irq == PARPORT_IRQ_NONE)
+			pb->irq = irq_probe_ECP(pb);
+	}
+
+	if ((pb->irq == PARPORT_IRQ_NONE) && priv->ecr &&
+	    (pb->modes & PARPORT_MODE_EPP))
+		pb->irq = irq_probe_EPP(pb);
+
+	clear_epp_timeout(pb);
+
+	if (pb->irq == PARPORT_IRQ_NONE && (pb->modes & PARPORT_MODE_EPP))
+		pb->irq = irq_probe_EPP(pb);
+
+	clear_epp_timeout(pb);
+
+	if (pb->irq == PARPORT_IRQ_NONE)
+		pb->irq = irq_probe_SPP(pb);
+
+	if (pb->irq == PARPORT_IRQ_NONE)
+		pb->irq = get_superio_irq(pb);
+
+	return pb->irq;
+}
+
+/* --- DMA detection -------------------------------------- */
+
+/* Only if chipset conforms to ECP ISA Interface Standard */
+static int __devinit programmable_dma_support (struct parport *p)
+{
+	unsigned char oecr = inb (ECONTROL (p));
+	int dma;
+
+	frob_set_mode (p, ECR_CNF);
+	
+	dma = inb (CONFIGB(p)) & 0x07;
+	/* 000: Indicates jumpered 8-bit DMA if read-only.
+	   100: Indicates jumpered 16-bit DMA if read-only. */
+	if ((dma & 0x03) == 0)
+		dma = PARPORT_DMA_NONE;
+
+	ECR_WRITE (p, oecr);
+	return dma;
+}
+
+static int __devinit parport_dma_probe (struct parport *p)
+{
+	const struct parport_pc_private *priv = p->private_data;
+	if (priv->ecr)
+		p->dma = programmable_dma_support(p); /* ask ECP chipset first */
+	if (p->dma == PARPORT_DMA_NONE) {
+		/* ask known Super-IO chips proper, although these
+		   claim ECP compatible, some don't report their DMA
+		   conforming to ECP standards */
+		p->dma = get_superio_dma(p);
+	}
+
+	return p->dma;
+}
+
+/* --- Initialisation code -------------------------------- */
+
+static LIST_HEAD(ports_list);
+static DEFINE_SPINLOCK(ports_lock);
+
+struct parport *parport_pc_probe_port (unsigned long int base,
+				       unsigned long int base_hi,
+				       int irq, int dma,
+				       struct pci_dev *dev)
+{
+	struct parport_pc_private *priv;
+	struct parport_operations *ops;
+	struct parport *p;
+	int probedirq = PARPORT_IRQ_NONE;
+	struct resource *base_res;
+	struct resource	*ECR_res = NULL;
+	struct resource	*EPP_res = NULL;
+
+	ops = kmalloc(sizeof (struct parport_operations), GFP_KERNEL);
+	if (!ops)
+		goto out1;
+
+	priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
+	if (!priv)
+		goto out2;
+
+	/* a misnomer, actually - it's allocate and reserve parport number */
+	p = parport_register_port(base, irq, dma, ops);
+	if (!p)
+		goto out3;
+
+	base_res = request_region(base, 3, p->name);
+	if (!base_res)
+		goto out4;
+
+	memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations));
+	priv->ctr = 0xc;
+	priv->ctr_writable = ~0x10;
+	priv->ecr = 0;
+	priv->fifo_depth = 0;
+	priv->dma_buf = NULL;
+	priv->dma_handle = 0;
+	priv->dev = dev;
+	INIT_LIST_HEAD(&priv->list);
+	priv->port = p;
+	p->base_hi = base_hi;
+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+	p->private_data = priv;
+
+	if (base_hi) {
+		ECR_res = request_region(base_hi, 3, p->name);
+		if (ECR_res)
+			parport_ECR_present(p);
+	}
+
+	if (base != 0x3bc) {
+		EPP_res = request_region(base+0x3, 5, p->name);
+		if (EPP_res)
+			if (!parport_EPP_supported(p))
+				parport_ECPEPP_supported(p);
+	}
+	if (!parport_SPP_supported (p))
+		/* No port. */
+		goto out5;
+	if (priv->ecr)
+		parport_ECPPS2_supported(p);
+	else
+		parport_PS2_supported(p);
+
+	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+
+	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+	if (p->base_hi && priv->ecr)
+		printk(" (0x%lx)", p->base_hi);
+	if (p->irq == PARPORT_IRQ_AUTO) {
+		p->irq = PARPORT_IRQ_NONE;
+		parport_irq_probe(p);
+	} else if (p->irq == PARPORT_IRQ_PROBEONLY) {
+		p->irq = PARPORT_IRQ_NONE;
+		parport_irq_probe(p);
+		probedirq = p->irq;
+		p->irq = PARPORT_IRQ_NONE;
+	}
+	if (p->irq != PARPORT_IRQ_NONE) {
+		printk(", irq %d", p->irq);
+		priv->ctr_writable |= 0x10;
+
+		if (p->dma == PARPORT_DMA_AUTO) {
+			p->dma = PARPORT_DMA_NONE;
+			parport_dma_probe(p);
+		}
+	}
+	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
+                                           is mandatory (see above) */
+		p->dma = PARPORT_DMA_NONE;
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+	if (parport_ECP_supported(p) &&
+	    p->dma != PARPORT_DMA_NOFIFO &&
+	    priv->fifo_depth > 0 && p->irq != PARPORT_IRQ_NONE) {
+		p->modes |= PARPORT_MODE_ECP | PARPORT_MODE_COMPAT;
+		p->ops->compat_write_data = parport_pc_compat_write_block_pio;
+#ifdef CONFIG_PARPORT_1284
+		p->ops->ecp_write_data = parport_pc_ecp_write_block_pio;
+		/* currently broken, but working on it.. (FB) */
+		/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
+#endif /* IEEE 1284 support */
+		if (p->dma != PARPORT_DMA_NONE) {
+			printk(", dma %d", p->dma);
+			p->modes |= PARPORT_MODE_DMA;
+		}
+		else printk(", using FIFO");
+	}
+	else
+		/* We can't use the DMA channel after all. */
+		p->dma = PARPORT_DMA_NONE;
+#endif /* Allowed to use FIFO/DMA */
+
+	printk(" [");
+#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+	{
+		int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT)
+		printmode(EPP);
+		printmode(ECP);
+		printmode(DMA);
+	}
+#undef printmode
+#ifndef CONFIG_PARPORT_1284
+	printk ("(,...)");
+#endif /* CONFIG_PARPORT_1284 */
+	printk("]\n");
+	if (probedirq != PARPORT_IRQ_NONE) 
+		printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
+
+	/* If No ECP release the ports grabbed above. */
+	if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) {
+		release_region(base_hi, 3);
+		ECR_res = NULL;
+	}
+	/* Likewise for EEP ports */
+	if (EPP_res && (p->modes & PARPORT_MODE_EPP) == 0) {
+		release_region(base+3, 5);
+		EPP_res = NULL;
+	}
+	if (p->irq != PARPORT_IRQ_NONE) {
+		if (request_irq (p->irq, parport_pc_interrupt,
+				 0, p->name, p)) {
+			printk (KERN_WARNING "%s: irq %d in use, "
+				"resorting to polled operation\n",
+				p->name, p->irq);
+			p->irq = PARPORT_IRQ_NONE;
+			p->dma = PARPORT_DMA_NONE;
+		}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+		if (p->dma != PARPORT_DMA_NONE) {
+			if (request_dma (p->dma, p->name)) {
+				printk (KERN_WARNING "%s: dma %d in use, "
+					"resorting to PIO operation\n",
+					p->name, p->dma);
+				p->dma = PARPORT_DMA_NONE;
+			} else {
+				priv->dma_buf =
+				  pci_alloc_consistent(priv->dev,
+						       PAGE_SIZE,
+						       &priv->dma_handle);
+				if (! priv->dma_buf) {
+					printk (KERN_WARNING "%s: "
+						"cannot get buffer for DMA, "
+						"resorting to PIO operation\n",
+						p->name);
+					free_dma(p->dma);
+					p->dma = PARPORT_DMA_NONE;
+				}
+			}
+		}
+#endif /* CONFIG_PARPORT_PC_FIFO */
+	}
+
+	/* Done probing.  Now put the port into a sensible start-up state. */
+	if (priv->ecr)
+		/*
+		 * Put the ECP detected port in PS2 mode.
+		 * Do this also for ports that have ECR but don't do ECP.
+		 */
+		ECR_WRITE (p, 0x34);
+
+	parport_pc_write_data(p, 0);
+	parport_pc_data_forward (p);
+
+	/* Now that we've told the sharing engine about the port, and
+	   found out its characteristics, let the high-level drivers
+	   know about it. */
+	spin_lock(&ports_lock);
+	list_add(&priv->list, &ports_list);
+	spin_unlock(&ports_lock);
+	parport_announce_port (p);
+
+	return p;
+
+out5:
+	if (ECR_res)
+		release_region(base_hi, 3);
+	if (EPP_res)
+		release_region(base+0x3, 5);
+	release_region(base, 3);
+out4:
+	parport_put_port(p);
+out3:
+	kfree (priv);
+out2:
+	kfree (ops);
+out1:
+	return NULL;
+}
+
+EXPORT_SYMBOL (parport_pc_probe_port);
+
+void parport_pc_unregister_port (struct parport *p)
+{
+	struct parport_pc_private *priv = p->private_data;
+	struct parport_operations *ops = p->ops;
+
+	parport_remove_port(p);
+	spin_lock(&ports_lock);
+	list_del_init(&priv->list);
+	spin_unlock(&ports_lock);
+	if (p->dma != PARPORT_DMA_NONE)
+		free_dma(p->dma);
+	if (p->irq != PARPORT_IRQ_NONE)
+		free_irq(p->irq, p);
+	release_region(p->base, 3);
+	if (p->size > 3)
+		release_region(p->base + 3, p->size - 3);
+	if (p->modes & PARPORT_MODE_ECP)
+		release_region(p->base_hi, 3);
+#ifdef CONFIG_PARPORT_PC_FIFO
+	if (priv->dma_buf)
+		pci_free_consistent(priv->dev, PAGE_SIZE,
+				    priv->dma_buf,
+				    priv->dma_handle);
+#endif /* CONFIG_PARPORT_PC_FIFO */
+	kfree (p->private_data);
+	parport_put_port(p);
+	kfree (ops); /* hope no-one cached it */
+}
+
+EXPORT_SYMBOL (parport_pc_unregister_port);
+
+#ifdef CONFIG_PCI
+
+/* ITE support maintained by Rich Liu <richliu@poorman.org> */
+static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
+					 int autodma, struct parport_pc_via_data *via)
+{
+	short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
+	struct resource *base_res;
+	u32 ite8872set;
+	u32 ite8872_lpt, ite8872_lpthi;
+	u8 ite8872_irq, type;
+	char *fake_name = "parport probe";
+	int irq;
+	int i;
+
+	DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n");
+	
+	// make sure which one chip
+	for(i = 0; i < 5; i++) {
+		base_res = request_region(inta_addr[i], 0x8, fake_name);
+		if (base_res) {
+			int test;
+			pci_write_config_dword (pdev, 0x60,
+						0xe7000000 | inta_addr[i]);
+			pci_write_config_dword (pdev, 0x78,
+						0x00000000 | inta_addr[i]);
+			test = inb (inta_addr[i]);
+			if (test != 0xff) break;
+			release_region(inta_addr[i], 0x8);
+		}
+	}
+	if(i >= 5) {
+		printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+		return 0;
+	}
+
+	type = inb (inta_addr[i] + 0x18);
+	type &= 0x0f;
+
+	switch (type) {
+	case 0x2:
+		printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+		ite8872set = 0x64200000;
+		break;
+	case 0xa:
+		printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+		ite8872set = 0x64200000;
+		break;
+	case 0xe:
+		printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+		ite8872set = 0x64e00000;
+		break;
+	case 0x6:
+		printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+		return 0;
+	case 0x8:
+		DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
+		return 0;
+	default:
+		printk (KERN_INFO "parport_pc: unknown ITE887x\n");
+		printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' "
+			"output to Rich.Liu@ite.com.tw\n");
+		return 0;
+	}
+
+	pci_read_config_byte (pdev, 0x3c, &ite8872_irq);
+	pci_read_config_dword (pdev, 0x1c, &ite8872_lpt);
+	ite8872_lpt &= 0x0000ff00;
+	pci_read_config_dword (pdev, 0x20, &ite8872_lpthi);
+	ite8872_lpthi &= 0x0000ff00;
+	pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt);
+	pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi);
+	pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
+	// SET SPP&EPP , Parallel Port NO DMA , Enable All Function
+	// SET Parallel IRQ
+	pci_write_config_dword (pdev, 0x9c,
+				ite8872set | (ite8872_irq * 0x11111));
+
+	DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
+	DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
+		 ite8872_lpt);
+	DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
+		 ite8872_lpthi);
+
+	/* Let the user (or defaults) steer us away from interrupts */
+	irq = ite8872_irq;
+	if (autoirq != PARPORT_IRQ_AUTO)
+		irq = PARPORT_IRQ_NONE;
+
+	/*
+	 * Release the resource so that parport_pc_probe_port can get it.
+	 */
+	release_resource(base_res);
+	if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
+				   irq, PARPORT_DMA_NONE, NULL)) {
+		printk (KERN_INFO
+			"parport_pc: ITE 8872 parallel port: io=0x%X",
+			ite8872_lpt);
+		if (irq != PARPORT_IRQ_NONE)
+			printk (", irq=%d", irq);
+		printk ("\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
+   based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
+static int __devinitdata parport_init_mode = 0;
+
+/* Data for two known VIA chips */
+static struct parport_pc_via_data via_686a_data __devinitdata = {
+	0x51,
+	0x50,
+	0x85,
+	0x02,
+	0xE2,
+	0xF0,
+	0xE6
+};
+static struct parport_pc_via_data via_8231_data __devinitdata = {
+	0x45,
+	0x44,
+	0x50,
+	0x04,
+	0xF2,
+	0xFA,
+	0xF6
+};
+
+static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
+					 int autodma, struct parport_pc_via_data *via)
+{
+	u8 tmp, tmp2, siofunc;
+	u8 ppcontrol = 0;
+	int dma, irq;
+	unsigned port1, port2;
+	unsigned have_epp = 0;
+
+	printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
+
+	switch(parport_init_mode)
+	{
+	case 1:
+	    printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+	    siofunc = VIA_FUNCTION_PARPORT_SPP;
+	    break;
+	case 2:
+	    printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+	    siofunc = VIA_FUNCTION_PARPORT_SPP;
+	    ppcontrol = VIA_PARPORT_BIDIR;
+	    break;
+	case 3:
+	    printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+	    siofunc = VIA_FUNCTION_PARPORT_EPP;
+	    ppcontrol = VIA_PARPORT_BIDIR;
+	    have_epp = 1;
+	    break;
+	case 4:
+	    printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+	    siofunc = VIA_FUNCTION_PARPORT_ECP;
+	    ppcontrol = VIA_PARPORT_BIDIR;
+	    break;
+	case 5:
+	    printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+	    siofunc = VIA_FUNCTION_PARPORT_ECP;
+	    ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+	    have_epp = 1;
+	    break;
+	 default:
+	    printk(KERN_DEBUG "parport_pc: probing current configuration\n");
+	    siofunc = VIA_FUNCTION_PROBE;
+	    break;
+	}
+	/*
+	 * unlock super i/o configuration
+	 */
+	pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+	tmp |= via->via_pci_superio_config_data;
+	pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+	/* Bits 1-0: Parallel Port Mode / Enable */
+	outb(via->viacfg_function, VIA_CONFIG_INDEX);
+	tmp = inb (VIA_CONFIG_DATA);
+	/* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
+	outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+	tmp2 = inb (VIA_CONFIG_DATA);
+	if (siofunc == VIA_FUNCTION_PROBE)
+	{
+	    siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+	    ppcontrol = tmp2;
+	}
+	else
+	{
+	    tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+	    tmp |= siofunc;
+	    outb(via->viacfg_function, VIA_CONFIG_INDEX);
+	    outb(tmp, VIA_CONFIG_DATA);
+	    tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+	    tmp2 |= ppcontrol;
+	    outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+	    outb(tmp2, VIA_CONFIG_DATA);
+	}
+	
+	/* Parallel Port I/O Base Address, bits 9-2 */
+	outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+	port1 = inb(VIA_CONFIG_DATA) << 2;
+	
+	printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
+	if ((port1 == 0x3BC) && have_epp)
+	{
+	    outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+	    outb((0x378 >> 2), VIA_CONFIG_DATA);
+	    printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
+	    port1 = 0x378;
+	}
+
+	/*
+	 * lock super i/o configuration
+	 */
+	pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+	tmp &= ~via->via_pci_superio_config_data;
+	pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+	if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) {
+		printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
+		return 0;
+	}
+	
+	/* Bits 7-4: PnP Routing for Parallel Port IRQ */
+	pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
+	irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
+
+	if (siofunc == VIA_FUNCTION_PARPORT_ECP)
+	{
+	    /* Bits 3-2: PnP Routing for Parallel Port DMA */
+	    pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+	    dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+	}
+	else
+	    /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
+	    dma = PARPORT_DMA_NONE;
+
+	/* Let the user (or defaults) steer us away from interrupts and DMA */
+	if (autoirq == PARPORT_IRQ_NONE) {
+	    irq = PARPORT_IRQ_NONE;
+	    dma = PARPORT_DMA_NONE;
+	}
+	if (autodma == PARPORT_DMA_NONE)
+	    dma = PARPORT_DMA_NONE;
+
+	switch (port1) {
+	case 0x3bc: port2 = 0x7bc; break;
+	case 0x378: port2 = 0x778; break;
+	case 0x278: port2 = 0x678; break;
+	default:
+		printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+			port1);
+		return 0;
+	}
+
+	/* filter bogus IRQs */
+	switch (irq) {
+	case 0:
+	case 2:
+	case 8:
+	case 13:
+		irq = PARPORT_IRQ_NONE;
+		break;
+
+	default: /* do nothing */
+		break;
+	}
+
+	/* finally, do the probe with values obtained */
+	if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) {
+		printk (KERN_INFO
+			"parport_pc: VIA parallel port: io=0x%X", port1);
+		if (irq != PARPORT_IRQ_NONE)
+			printk (", irq=%d", irq);
+		if (dma != PARPORT_DMA_NONE)
+			printk (", dma=%d", dma);
+		printk ("\n");
+		return 1;
+	}
+	
+	printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
+		port1, irq, dma);
+	return 0;
+}
+
+
+enum parport_pc_sio_types {
+	sio_via_686a = 0,	/* Via VT82C686A motherboard Super I/O */
+	sio_via_8231,		/* Via VT8231 south bridge integrated Super IO */
+	sio_ite_8872,
+	last_sio
+};
+
+/* each element directly indexed from enum list, above */
+static struct parport_pc_superio {
+	int (*probe) (struct pci_dev *pdev, int autoirq, int autodma, struct parport_pc_via_data *via);
+	struct parport_pc_via_data *via;
+} parport_pc_superio_info[] __devinitdata = {
+	{ sio_via_probe, &via_686a_data, },
+	{ sio_via_probe, &via_8231_data, },
+	{ sio_ite_8872_probe, NULL, },
+};
+
+enum parport_pc_pci_cards {
+	siig_1p_10x = last_sio,
+	siig_2p_10x,
+	siig_1p_20x,
+	siig_2p_20x,
+	lava_parallel,
+	lava_parallel_dual_a,
+	lava_parallel_dual_b,
+	boca_ioppar,
+	plx_9050,
+	timedia_4078a,
+	timedia_4079h,
+	timedia_4085h,
+	timedia_4088a,
+	timedia_4089a,
+	timedia_4095a,
+	timedia_4096a,
+	timedia_4078u,
+	timedia_4079a,
+	timedia_4085u,
+	timedia_4079r,
+	timedia_4079s,
+	timedia_4079d,
+	timedia_4079e,
+	timedia_4079f,
+	timedia_9079a,
+	timedia_9079b,
+	timedia_9079c,
+	timedia_4006a,
+	timedia_4014,
+	timedia_4008a,
+	timedia_4018,
+	timedia_9018a,
+	syba_2p_epp,
+	syba_1p_ecp,
+	titan_010l,
+	titan_1284p2,
+	avlab_1p,
+	avlab_2p,
+	oxsemi_954,
+	oxsemi_840,
+	aks_0100,
+	mobility_pp,
+	netmos_9705,
+	netmos_9715,
+	netmos_9755,
+	netmos_9805,
+	netmos_9815,
+	netmos_9855,
+};
+
+
+/* each element directly indexed from enum list, above 
+ * (but offset by last_sio) */
+static struct parport_pc_pci {
+	int numports;
+	struct { /* BAR (base address registers) numbers in the config
+                    space header */
+		int lo;
+		int hi; /* -1 if not there, >6 for offset-method (max
+                           BAR is 6) */
+	} addr[4];
+
+	/* If set, this is called immediately after pci_enable_device.
+	 * If it returns non-zero, no probing will take place and the
+	 * ports will not be used. */
+	int (*preinit_hook) (struct pci_dev *pdev, int autoirq, int autodma);
+
+	/* If set, this is called after probing for ports.  If 'failed'
+	 * is non-zero we couldn't use any of the ports. */
+	void (*postinit_hook) (struct pci_dev *pdev, int failed);
+} cards[] __devinitdata = {
+	/* siig_1p_10x */		{ 1, { { 2, 3 }, } },
+	/* siig_2p_10x */		{ 2, { { 2, 3 }, { 4, 5 }, } },
+	/* siig_1p_20x */		{ 1, { { 0, 1 }, } },
+	/* siig_2p_20x */		{ 2, { { 0, 1 }, { 2, 3 }, } },
+	/* lava_parallel */		{ 1, { { 0, -1 }, } },
+	/* lava_parallel_dual_a */	{ 1, { { 0, -1 }, } },
+	/* lava_parallel_dual_b */	{ 1, { { 0, -1 }, } },
+	/* boca_ioppar */		{ 1, { { 0, -1 }, } },
+	/* plx_9050 */			{ 2, { { 4, -1 }, { 5, -1 }, } },
+	/* timedia_4078a */		{ 1, { { 2, -1 }, } },
+	/* timedia_4079h */             { 1, { { 2, 3 }, } },
+	/* timedia_4085h */             { 2, { { 2, -1 }, { 4, -1 }, } },
+	/* timedia_4088a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4089a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4095a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4096a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4078u */             { 1, { { 2, -1 }, } },
+	/* timedia_4079a */             { 1, { { 2, 3 }, } },
+	/* timedia_4085u */             { 2, { { 2, -1 }, { 4, -1 }, } },
+	/* timedia_4079r */             { 1, { { 2, 3 }, } },
+	/* timedia_4079s */             { 1, { { 2, 3 }, } },
+	/* timedia_4079d */             { 1, { { 2, 3 }, } },
+	/* timedia_4079e */             { 1, { { 2, 3 }, } },
+	/* timedia_4079f */             { 1, { { 2, 3 }, } },
+	/* timedia_9079a */             { 1, { { 2, 3 }, } },
+	/* timedia_9079b */             { 1, { { 2, 3 }, } },
+	/* timedia_9079c */             { 1, { { 2, 3 }, } },
+	/* timedia_4006a */             { 1, { { 0, -1 }, } },
+	/* timedia_4014  */             { 2, { { 0, -1 }, { 2, -1 }, } },
+	/* timedia_4008a */             { 1, { { 0, 1 }, } },
+	/* timedia_4018  */             { 2, { { 0, 1 }, { 2, 3 }, } },
+	/* timedia_9018a */             { 2, { { 0, 1 }, { 2, 3 }, } },
+					/* SYBA uses fixed offsets in
+                                           a 1K io window */
+	/* syba_2p_epp AP138B */	{ 2, { { 0, 0x078 }, { 0, 0x178 }, } },
+	/* syba_1p_ecp W83787 */	{ 1, { { 0, 0x078 }, } },
+	/* titan_010l */		{ 1, { { 3, -1 }, } },
+	/* titan_1284p2 */		{ 2, { { 0, 1 }, { 2, 3 }, } },
+	/* avlab_1p		*/	{ 1, { { 0, 1}, } },
+	/* avlab_2p		*/	{ 2, { { 0, 1}, { 2, 3 },} },
+	/* The Oxford Semi cards are unusual: 954 doesn't support ECP,
+	 * and 840 locks up if you write 1 to bit 2! */
+	/* oxsemi_954 */		{ 1, { { 0, -1 }, } },
+	/* oxsemi_840 */		{ 1, { { 0, -1 }, } },
+	/* aks_0100 */                  { 1, { { 0, -1 }, } },
+	/* mobility_pp */		{ 1, { { 0, 1 }, } },
+	/* netmos_9705 */               { 1, { { 0, -1 }, } }, /* untested */
+        /* netmos_9715 */               { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
+        /* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
+	/* netmos_9805 */               { 1, { { 0, -1 }, } }, /* untested */
+	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+	/* netmos_9855 */               { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+};
+
+static struct pci_device_id parport_pc_pci_tbl[] = {
+	/* Super-IO onboard chips */
+	{ 0x1106, 0x0686, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_686a },
+	{ 0x1106, 0x8231, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_8231 },
+	{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_ite_8872 },
+
+	/* PCI cards */
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_10x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_10x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_20x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_20x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_20x },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PARALLEL,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_A,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_a },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_B,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_b },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+	  PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
+	/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
+	{ 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
+	{ 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
+	{ 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
+	{ 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
+	{ 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
+	{ 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
+	{ 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
+	{ 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
+	{ 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
+	{ 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
+	{ 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
+	{ 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
+	{ 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
+	{ 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
+	{ 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
+	{ 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
+	{ 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
+	{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
+	{ 0x1409, 0x7268, 0x1409, 0x0101, 0, 0, timedia_4006a },
+	{ 0x1409, 0x7268, 0x1409, 0x0102, 0, 0, timedia_4014 },
+	{ 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a },
+	{ 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 },
+	{ 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a },
+	{ 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
+	{ PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp },
+	{ PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
+	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
+	{ 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
+	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
+	{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */
+	{ 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954PP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 },
+	{ PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
+	/* NetMos communication controllers */
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9715 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9755,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9755 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9805,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
+	{ 0, } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
+
+struct pci_parport_data {
+	int num;
+	struct parport *ports[2];
+};
+
+static int parport_pc_pci_probe (struct pci_dev *dev,
+					   const struct pci_device_id *id)
+{
+	int err, count, n, i = id->driver_data;
+	struct pci_parport_data *data;
+
+	if (i < last_sio)
+		/* This is an onboard Super-IO and has already been probed */
+		return 0;
+
+	/* This is a PCI card */
+	i -= last_sio;
+	count = 0;
+	if ((err = pci_enable_device (dev)) != 0)
+		return err;
+
+	data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (cards[i].preinit_hook &&
+	    cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
+		kfree(data);
+		return -ENODEV;
+	}
+
+	for (n = 0; n < cards[i].numports; n++) {
+		int lo = cards[i].addr[n].lo;
+		int hi = cards[i].addr[n].hi;
+		unsigned long io_lo, io_hi;
+		io_lo = pci_resource_start (dev, lo);
+		io_hi = 0;
+		if ((hi >= 0) && (hi <= 6))
+			io_hi = pci_resource_start (dev, hi);
+		else if (hi > 6)
+			io_lo += hi; /* Reinterpret the meaning of
+                                        "hi" as an offset (see SYBA
+                                        def.) */
+		/* TODO: test if sharing interrupts works */
+		printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
+			"I/O at %#lx(%#lx)\n",
+			parport_pc_pci_tbl[i + last_sio].vendor,
+			parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi);
+		data->ports[count] =
+			parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
+					       PARPORT_DMA_NONE, dev);
+		if (data->ports[count])
+			count++;
+	}
+
+	data->num = count;
+
+	if (cards[i].postinit_hook)
+		cards[i].postinit_hook (dev, count == 0);
+
+	if (count) {
+		pci_set_drvdata(dev, data);
+		return 0;
+	}
+
+	kfree(data);
+
+	return -ENODEV;
+}
+
+static void __devexit parport_pc_pci_remove(struct pci_dev *dev)
+{
+	struct pci_parport_data *data = pci_get_drvdata(dev);
+	int i;
+
+	pci_set_drvdata(dev, NULL);
+
+	if (data) {
+		for (i = data->num - 1; i >= 0; i--)
+			parport_pc_unregister_port(data->ports[i]);
+
+		kfree(data);
+	}
+}
+
+static struct pci_driver parport_pc_pci_driver = {
+	.name		= "parport_pc",
+	.id_table	= parport_pc_pci_tbl,
+	.probe		= parport_pc_pci_probe,
+	.remove		= __devexit_p(parport_pc_pci_remove),
+};
+
+static int __init parport_pc_init_superio (int autoirq, int autodma)
+{
+	const struct pci_device_id *id;
+	struct pci_dev *pdev = NULL;
+	int ret = 0;
+
+	while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
+		id = pci_match_device (parport_pc_pci_tbl, pdev);
+		if (id == NULL || id->driver_data >= last_sio)
+			continue;
+
+		if (parport_pc_superio_info[id->driver_data].probe
+			(pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
+			ret++;
+		}
+	}
+
+	return ret; /* number of devices found */
+}
+#else
+static struct pci_driver parport_pc_pci_driver;
+static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;}
+#endif /* CONFIG_PCI */
+
+
+static const struct pnp_device_id parport_pc_pnp_tbl[] = {
+	/* Standard LPT Printer Port */
+	{.id = "PNP0400", .driver_data = 0},
+	/* ECP Printer Port */
+	{.id = "PNP0401", .driver_data = 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl);
+
+static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+{
+	struct parport *pdata;
+	unsigned long io_lo, io_hi;
+	int dma, irq;
+
+	if (pnp_port_valid(dev,0) &&
+		!(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
+		io_lo = pnp_port_start(dev,0);
+	} else
+		return -EINVAL;
+
+	if (pnp_port_valid(dev,1) &&
+		!(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
+		io_hi = pnp_port_start(dev,1);
+	} else
+		io_hi = 0;
+
+	if (pnp_irq_valid(dev,0) &&
+		!(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
+		irq = pnp_irq(dev,0);
+	} else
+		irq = PARPORT_IRQ_NONE;
+
+	if (pnp_dma_valid(dev,0) &&
+		!(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
+		dma = pnp_dma(dev,0);
+	} else
+		dma = PARPORT_DMA_NONE;
+
+	printk(KERN_INFO "parport: PnPBIOS parport detected.\n");
+	if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL)))
+		return -ENODEV;
+
+	pnp_set_drvdata(dev,pdata);
+	return 0;
+}
+
+static void parport_pc_pnp_remove(struct pnp_dev *dev)
+{
+	struct parport *pdata = (struct parport *)pnp_get_drvdata(dev);
+	if (!pdata)
+		return;
+
+	parport_pc_unregister_port(pdata);
+}
+
+/* we only need the pnp layer to activate the device, at least for now */
+static struct pnp_driver parport_pc_pnp_driver = {
+	.name		= "parport_pc",
+	.id_table	= parport_pc_pnp_tbl,
+	.probe		= parport_pc_pnp_probe,
+	.remove		= parport_pc_pnp_remove,
+};
+
+
+/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
+static int __devinit __attribute__((unused))
+parport_pc_find_isa_ports (int autoirq, int autodma)
+{
+	int count = 0;
+
+	if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL))
+		count++;
+	if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL))
+		count++;
+	if (parport_pc_probe_port(0x278, 0x678, autoirq, autodma, NULL))
+		count++;
+
+	return count;
+}
+
+/* This function is called by parport_pc_init if the user didn't
+ * specify any ports to probe.  Its job is to find some ports.  Order
+ * is important here -- we want ISA ports to be registered first,
+ * followed by PCI cards (for least surprise), but before that we want
+ * to do chipset-specific tests for some onboard ports that we know
+ * about.
+ *
+ * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
+ * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
+ */
+static int __init parport_pc_find_ports (int autoirq, int autodma)
+{
+	int count = 0, r;
+
+#ifdef CONFIG_PARPORT_PC_SUPERIO
+	detect_and_report_winbond ();
+	detect_and_report_smsc ();
+#endif
+
+	/* Onboard SuperIO chipsets that show themselves on the PCI bus. */
+	count += parport_pc_init_superio (autoirq, autodma);
+
+	/* PnP ports, skip detection if SuperIO already found them */
+	if (!count) {
+		r = pnp_register_driver (&parport_pc_pnp_driver);
+		if (r >= 0) {
+			pnp_registered_parport = 1;
+			count += r;
+		}
+	}
+
+	/* ISA ports and whatever (see asm/parport.h). */
+	count += parport_pc_find_nonpci_ports (autoirq, autodma);
+
+	r = pci_register_driver (&parport_pc_pci_driver);
+	if (r)
+		return r;
+	pci_registered_parport = 1;
+	count += 1;
+
+	return count;
+}
+
+/*
+ *	Piles of crap below pretend to be a parser for module and kernel
+ *	parameters.  Say "thank you" to whoever had come up with that
+ *	syntax and keep in mind that code below is a cleaned up version.
+ */
+
+static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 };
+static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] =
+	{ [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO };
+static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE };
+static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY };
+
+static int __init parport_parse_param(const char *s, int *val,
+				int automatic, int none, int nofifo)
+{
+	if (!s)
+		return 0;
+	if (!strncmp(s, "auto", 4))
+		*val = automatic;
+	else if (!strncmp(s, "none", 4))
+		*val = none;
+	else if (nofifo && !strncmp(s, "nofifo", 4))
+		*val = nofifo;
+	else {
+		char *ep;
+		unsigned long r = simple_strtoul(s, &ep, 0);
+		if (ep != s)
+			*val = r;
+		else {
+			printk(KERN_ERR "parport: bad specifier `%s'\n", s);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int __init parport_parse_irq(const char *irqstr, int *val)
+{
+	return parport_parse_param(irqstr, val, PARPORT_IRQ_AUTO,
+				     PARPORT_IRQ_NONE, 0);
+}
+
+static int __init parport_parse_dma(const char *dmastr, int *val)
+{
+	return parport_parse_param(dmastr, val, PARPORT_DMA_AUTO,
+				     PARPORT_DMA_NONE, PARPORT_DMA_NOFIFO);
+}
+
+#ifdef CONFIG_PCI
+static int __init parport_init_mode_setup(char *str)
+{
+	printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+
+	if (!strcmp (str, "spp"))
+		parport_init_mode=1;
+	if (!strcmp (str, "ps2"))
+		parport_init_mode=2;
+	if (!strcmp (str, "epp"))
+		parport_init_mode=3;
+	if (!strcmp (str, "ecp"))
+		parport_init_mode=4;
+	if (!strcmp (str, "ecpepp"))
+		parport_init_mode=5;
+	return 1;
+}
+#endif
+
+#ifdef MODULE
+static const char *irq[PARPORT_PC_MAX_PORTS];
+static const char *dma[PARPORT_PC_MAX_PORTS];
+
+MODULE_PARM_DESC(io, "Base I/O address (SPP regs)");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)");
+module_param_array(io_hi, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ line");
+module_param_array(irq, charp, NULL, 0);
+MODULE_PARM_DESC(dma, "DMA channel");
+module_param_array(dma, charp, NULL, 0);
+#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
+       (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
+MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation");
+module_param(verbose_probing, int, 0644);
+#endif
+#ifdef CONFIG_PCI
+static char *init_mode;
+MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+module_param(init_mode, charp, 0);
+#endif
+
+static int __init parse_parport_params(void)
+{
+	unsigned int i;
+	int val;
+
+#ifdef CONFIG_PCI
+	if (init_mode)
+		parport_init_mode_setup(init_mode);
+#endif
+
+	for (i = 0; i < PARPORT_PC_MAX_PORTS && io[i]; i++) {
+		if (parport_parse_irq(irq[i], &val))
+			return 1;
+		irqval[i] = val;
+		if (parport_parse_dma(dma[i], &val))
+			return 1;
+		dmaval[i] = val;
+	}
+	if (!io[0]) {
+		/* The user can make us use any IRQs or DMAs we find. */
+		if (irq[0] && !parport_parse_irq(irq[0], &val))
+			switch (val) {
+			case PARPORT_IRQ_NONE:
+			case PARPORT_IRQ_AUTO:
+				irqval[0] = val;
+				break;
+			default:
+				printk (KERN_WARNING
+					"parport_pc: irq specified "
+					"without base address.  Use 'io=' "
+					"to specify one\n");
+			}
+
+		if (dma[0] && !parport_parse_dma(dma[0], &val))
+			switch (val) {
+			case PARPORT_DMA_NONE:
+			case PARPORT_DMA_AUTO:
+				dmaval[0] = val;
+				break;
+			default:
+				printk (KERN_WARNING
+					"parport_pc: dma specified "
+					"without base address.  Use 'io=' "
+					"to specify one\n");
+			}
+	}
+	return 0;
+}
+
+#else
+
+static int parport_setup_ptr __initdata = 0;
+
+/*
+ * Acceptable parameters:
+ *
+ * parport=0
+ * parport=auto
+ * parport=0xBASE[,IRQ[,DMA]]
+ *
+ * IRQ/DMA may be numeric or 'auto' or 'none'
+ */
+static int __init parport_setup (char *str)
+{
+	char *endptr;
+	char *sep;
+	int val;
+
+	if (!str || !*str || (*str == '0' && !*(str+1))) {
+		/* Disable parport if "parport=0" in cmdline */
+		io[0] = PARPORT_DISABLE;
+		return 1;
+	}
+
+	if (!strncmp (str, "auto", 4)) {
+		irqval[0] = PARPORT_IRQ_AUTO;
+		dmaval[0] = PARPORT_DMA_AUTO;
+		return 1;
+	}
+
+	val = simple_strtoul (str, &endptr, 0);
+	if (endptr == str) {
+		printk (KERN_WARNING "parport=%s not understood\n", str);
+		return 1;
+	}
+
+	if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) {
+		printk(KERN_ERR "parport=%s ignored, too many ports\n", str);
+		return 1;
+	}
+
+	io[parport_setup_ptr] = val;
+	irqval[parport_setup_ptr] = PARPORT_IRQ_NONE;
+	dmaval[parport_setup_ptr] = PARPORT_DMA_NONE;
+
+	sep = strchr(str, ',');
+	if (sep++) {
+		if (parport_parse_irq(sep, &val))
+			return 1;
+		irqval[parport_setup_ptr] = val;
+		sep = strchr(sep, ',');
+		if (sep++) {
+			if (parport_parse_dma(sep, &val))
+				return 1;
+			dmaval[parport_setup_ptr] = val;
+		}
+	}
+	parport_setup_ptr++;
+	return 1;
+}
+
+static int __init parse_parport_params(void)
+{
+	return io[0] == PARPORT_DISABLE;
+}
+
+__setup ("parport=", parport_setup);
+
+/*
+ * Acceptable parameters:
+ *
+ * parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
+ */
+#ifdef CONFIG_PCI
+__setup("parport_init_mode=",parport_init_mode_setup);
+#endif
+#endif
+
+/* "Parser" ends here */
+
+static int __init parport_pc_init(void)
+{
+	int count = 0;
+
+	if (parse_parport_params())
+		return -EINVAL;
+
+	if (io[0]) {
+		int i;
+		/* Only probe the ports we were given. */
+		user_specified = 1;
+		for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
+			if (!io[i])
+				break;
+			if ((io_hi[i]) == PARPORT_IOHI_AUTO)
+			       io_hi[i] = 0x400 + io[i];
+			if (parport_pc_probe_port(io[i], io_hi[i],
+						  irqval[i], dmaval[i], NULL))
+				count++;
+		}
+	} else
+		count += parport_pc_find_ports (irqval[0], dmaval[0]);
+
+	return 0;
+}
+
+static void __exit parport_pc_exit(void)
+{
+	if (pci_registered_parport)
+		pci_unregister_driver (&parport_pc_pci_driver);
+	if (pnp_registered_parport)
+		pnp_unregister_driver (&parport_pc_pnp_driver);
+
+	spin_lock(&ports_lock);
+	while (!list_empty(&ports_list)) {
+		struct parport_pc_private *priv;
+		struct parport *port;
+		priv = list_entry(ports_list.next,
+				  struct parport_pc_private, list);
+		port = priv->port;
+		spin_unlock(&ports_lock);
+		parport_pc_unregister_port(port);
+		spin_lock(&ports_lock);
+	}
+	spin_unlock(&ports_lock);
+}
+
+MODULE_AUTHOR("Phil Blundell, Tim Waugh, others");
+MODULE_DESCRIPTION("PC-style parallel port driver");
+MODULE_LICENSE("GPL");
+module_init(parport_pc_init)
+module_exit(parport_pc_exit)
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
new file mode 100644
index 000000000000..6715a17b5d0f
--- /dev/null
+++ b/drivers/parport/parport_serial.c
@@ -0,0 +1,485 @@
+/*
+ * Support for common PCI multi-I/O cards (which is most of them)
+ *
+ * Copyright (C) 2001  Tim Waugh <twaugh@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * Multi-function PCI cards are supposed to present separate logical
+ * devices on the bus.  A common thing to do seems to be to just use
+ * one logical device with lots of base address registers for both
+ * parallel ports and serial ports.  This driver is for dealing with
+ * that.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/list.h>
+#include <linux/8250_pci.h>
+
+#include <asm/serial.h>
+
+enum parport_pc_pci_cards {
+	titan_110l = 0,
+	titan_210l,
+	netmos_9xx5_combo,
+	avlab_1s1p,
+	avlab_1s1p_650,
+	avlab_1s1p_850,
+	avlab_1s2p,
+	avlab_1s2p_650,
+	avlab_1s2p_850,
+	avlab_2s1p,
+	avlab_2s1p_650,
+	avlab_2s1p_850,
+	siig_1s1p_10x,
+	siig_2s1p_10x,
+	siig_2p1s_20x,
+	siig_1s1p_20x,
+	siig_2s1p_20x,
+};
+
+/* each element directly indexed from enum list, above */
+struct parport_pc_pci {
+	int numports;
+	struct { /* BAR (base address registers) numbers in the config
+                    space header */
+		int lo;
+		int hi; /* -1 if not there, >6 for offset-method (max
+                           BAR is 6) */
+	} addr[4];
+
+	/* If set, this is called immediately after pci_enable_device.
+	 * If it returns non-zero, no probing will take place and the
+	 * ports will not be used. */
+	int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
+				int autoirq, int autodma);
+
+	/* If set, this is called after probing for ports.  If 'failed'
+	 * is non-zero we couldn't use any of the ports. */
+	void (*postinit_hook) (struct pci_dev *pdev,
+				struct parport_pc_pci *card, int failed);
+};
+
+static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma)
+{
+	/*
+	 * Netmos uses the subdevice ID to indicate the number of parallel
+	 * and serial ports.  The form is 0x00PS, where <P> is the number of
+	 * parallel ports and <S> is the number of serial ports.
+	 */
+	card->numports = (dev->subsystem_device & 0xf0) >> 4;
+	return 0;
+}
+
+static struct parport_pc_pci cards[] __devinitdata = {
+	/* titan_110l */		{ 1, { { 3, -1 }, } },
+	/* titan_210l */		{ 1, { { 3, -1 }, } },
+	/* netmos_9xx5_combo */		{ 1, { { 2, -1 }, }, netmos_parallel_init },
+	/* avlab_1s1p     */		{ 1, { { 1, 2}, } },
+	/* avlab_1s1p_650 */		{ 1, { { 1, 2}, } },
+	/* avlab_1s1p_850 */		{ 1, { { 1, 2}, } },
+	/* avlab_1s2p     */		{ 2, { { 1, 2}, { 3, 4 },} },
+	/* avlab_1s2p_650 */		{ 2, { { 1, 2}, { 3, 4 },} },
+	/* avlab_1s2p_850 */		{ 2, { { 1, 2}, { 3, 4 },} },
+	/* avlab_2s1p     */		{ 1, { { 2, 3}, } },
+	/* avlab_2s1p_650 */		{ 1, { { 2, 3}, } },
+	/* avlab_2s1p_850 */		{ 1, { { 2, 3}, } },
+	/* siig_1s1p_10x */		{ 1, { { 3, 4 }, } },
+	/* siig_2s1p_10x */		{ 1, { { 4, 5 }, } },
+	/* siig_2p1s_20x */		{ 2, { { 1, 2 }, { 3, 4 }, } },
+	/* siig_1s1p_20x */		{ 1, { { 1, 2 }, } },
+	/* siig_2s1p_20x */		{ 1, { { 2, 3 }, } },
+};
+
+static struct pci_device_id parport_serial_pci_tbl[] = {
+	/* PCI cards */
+	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
+	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
+	{ 0x14db, 0x2110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p},
+	{ 0x14db, 0x2111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_650},
+	{ 0x14db, 0x2112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_850},
+	{ 0x14db, 0x2140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p},
+	{ 0x14db, 0x2141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_650},
+	{ 0x14db, 0x2142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_850},
+	{ 0x14db, 0x2160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p},
+	{ 0x14db, 0x2161, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_650},
+	{ 0x14db, 0x2162, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_850},
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+
+	{ 0, } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
+
+struct pci_board_no_ids {
+	int flags;
+	int num_ports;
+	int base_baud;
+	int uart_offset;
+	int reg_shift;
+	int (*init_fn)(struct pci_dev *dev, struct pci_board_no_ids *board,
+			int enable);
+	int first_uart_offset;
+};
+
+static int __devinit siig10x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
+{
+	return pci_siig10x_fn(dev, enable);
+}
+
+static int __devinit siig20x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
+{
+	return pci_siig20x_fn(dev, enable);
+}
+
+static int __devinit netmos_serial_init(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
+{
+	board->num_ports = dev->subsystem_device & 0xf;
+	return 0;
+}
+
+static struct pci_board_no_ids pci_boards[] __devinitdata = {
+	/*
+	 * PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
+	 * Offset to get to next UART's registers,
+	 * Register shift to use for memory-mapped I/O,
+	 * Initialization function, first UART offset
+	 */
+
+// Cards not tested are marked n/t
+// If you have one of these cards and it works for you, please tell me..
+
+/* titan_110l */	{ SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 },
+/* titan_210l */	{ SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
+/* netmos_9xx5_combo */	{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init },
+/* avlab_1s1p (n/t) */	{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
+/* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
+/* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
+/* avlab_1s2p (n/t) */	{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
+/* avlab_1s2p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
+/* avlab_1s2p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
+/* avlab_2s1p (n/t) */	{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
+/* avlab_2s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
+/* avlab_2s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
+/* siig_1s1p_10x */	{ SPCI_FL_BASE2, 1, 460800, 0, 0, siig10x_init_fn },
+/* siig_2s1p_10x */	{ SPCI_FL_BASE2, 1, 921600, 0, 0, siig10x_init_fn },
+/* siig_2p1s_20x */	{ SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
+/* siig_1s1p_20x */	{ SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
+/* siig_2s1p_20x */	{ SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
+};
+
+struct parport_serial_private {
+	int num_ser;
+	int line[20];
+	struct pci_board_no_ids ser;
+	int num_par;
+	struct parport *port[PARPORT_MAX];
+	struct parport_pc_pci par;
+};
+
+static int __devinit get_pci_port (struct pci_dev *dev,
+				   struct pci_board_no_ids *board,
+				   struct serial_struct *req,
+				   int idx)
+{
+	unsigned long port;
+	int base_idx;
+	int max_port;
+	int offset;
+
+	base_idx = SPCI_FL_GET_BASE(board->flags);
+	if (board->flags & SPCI_FL_BASE_TABLE)
+		base_idx += idx;
+
+	if (board->flags & SPCI_FL_REGION_SZ_CAP) {
+		max_port = pci_resource_len(dev, base_idx) / 8;
+		if (idx >= max_port)
+			return 1;
+	}
+			
+	offset = board->first_uart_offset;
+
+	/* Timedia/SUNIX uses a mixture of BARs and offsets */
+	/* Ugh, this is ugly as all hell --- TYT */
+	if(dev->vendor == PCI_VENDOR_ID_TIMEDIA )  /* 0x1409 */
+		switch(idx) {
+			case 0: base_idx=0;
+				break;
+			case 1: base_idx=0; offset=8;
+				break;
+			case 2: base_idx=1; 
+				break;
+			case 3: base_idx=1; offset=8;
+				break;
+			case 4: /* BAR 2*/
+			case 5: /* BAR 3 */
+			case 6: /* BAR 4*/
+			case 7: base_idx=idx-2; /* BAR 5*/
+		}
+  
+	port =  pci_resource_start(dev, base_idx) + offset;
+
+	if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
+		port += idx * (board->uart_offset ? board->uart_offset : 8);
+
+	if (pci_resource_flags (dev, base_idx) & IORESOURCE_IO) {
+		int high_bits_offset = ((sizeof(long)-sizeof(int))*8);
+		req->port = port;
+		if (high_bits_offset)
+			req->port_high = port >> high_bits_offset;
+		else
+			req->port_high = 0;
+		return 0;
+	}
+	req->io_type = SERIAL_IO_MEM;
+	req->iomem_base = ioremap(port, board->uart_offset);
+	req->iomem_reg_shift = board->reg_shift;
+	req->port = 0;
+	return req->iomem_base ? 0 : 1;
+}
+
+/* Register the serial port(s) of a PCI card. */
+static int __devinit serial_register (struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	struct pci_board_no_ids *board;
+	struct parport_serial_private *priv = pci_get_drvdata (dev);
+	struct serial_struct serial_req;
+	int base_baud;
+	int k;
+	int success = 0;
+
+	priv->ser = pci_boards[id->driver_data];
+	board = &priv->ser;
+	if (board->init_fn && ((board->init_fn) (dev, board, 1) != 0))
+		return 1;
+
+	base_baud = board->base_baud;
+	if (!base_baud)
+		base_baud = BASE_BAUD;
+	memset (&serial_req, 0, sizeof (serial_req));
+
+	for (k = 0; k < board->num_ports; k++) {
+		int line;
+
+		if (priv->num_ser == ARRAY_SIZE (priv->line)) {
+			printk (KERN_WARNING
+				"parport_serial: %s: only %u serial lines "
+				"supported (%d reported)\n", pci_name (dev),
+				ARRAY_SIZE (priv->line), board->num_ports);
+			break;
+		}
+
+		serial_req.irq = dev->irq;
+		if (get_pci_port (dev, board, &serial_req, k))
+			break;
+		serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
+		serial_req.baud_base = base_baud;
+		line = register_serial (&serial_req);
+		if (line < 0) {
+			printk (KERN_DEBUG
+				"parport_serial: register_serial failed\n");
+			continue;
+		}
+		priv->line[priv->num_ser++] = line;
+		success = 1;
+	}
+
+	return success ? 0 : 1;
+}
+
+/* Register the parallel port(s) of a PCI card. */
+static int __devinit parport_register (struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	struct parport_pc_pci *card;
+	struct parport_serial_private *priv = pci_get_drvdata (dev);
+	int i = id->driver_data, n;
+	int success = 0;
+
+	priv->par = cards[id->driver_data];
+	card = &priv->par;
+	if (card->preinit_hook &&
+	    card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
+		return -ENODEV;
+
+	for (n = 0; n < card->numports; n++) {
+		struct parport *port;
+		int lo = card->addr[n].lo;
+		int hi = card->addr[n].hi;
+		unsigned long io_lo, io_hi;
+
+		if (priv->num_par == ARRAY_SIZE (priv->port)) {
+			printk (KERN_WARNING
+				"parport_serial: %s: only %u parallel ports "
+				"supported (%d reported)\n", pci_name (dev),
+				ARRAY_SIZE (priv->port), card->numports);
+			break;
+		}
+
+		io_lo = pci_resource_start (dev, lo);
+		io_hi = 0;
+		if ((hi >= 0) && (hi <= 6))
+			io_hi = pci_resource_start (dev, hi);
+		else if (hi > 6)
+			io_lo += hi; /* Reinterpret the meaning of
+                                        "hi" as an offset (see SYBA
+                                        def.) */
+		/* TODO: test if sharing interrupts works */
+		printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
+			"I/O at %#lx(%#lx)\n",
+			parport_serial_pci_tbl[i].vendor,
+			parport_serial_pci_tbl[i].device, io_lo, io_hi);
+		port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
+					      PARPORT_DMA_NONE, dev);
+		if (port) {
+			priv->port[priv->num_par++] = port;
+			success = 1;
+		}
+	}
+
+	if (card->postinit_hook)
+		card->postinit_hook (dev, card, !success);
+
+	return success ? 0 : 1;
+}
+
+static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
+					       const struct pci_device_id *id)
+{
+	struct parport_serial_private *priv;
+	int err;
+
+	priv = kmalloc (sizeof *priv, GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->num_ser = priv->num_par = 0;
+	pci_set_drvdata (dev, priv);
+
+	err = pci_enable_device (dev);
+	if (err) {
+		pci_set_drvdata (dev, NULL);
+		kfree (priv);
+		return err;
+	}
+
+	if (parport_register (dev, id)) {
+		pci_set_drvdata (dev, NULL);
+		kfree (priv);
+		return -ENODEV;
+	}
+
+	if (serial_register (dev, id)) {
+		int i;
+		for (i = 0; i < priv->num_par; i++)
+			parport_pc_unregister_port (priv->port[i]);
+		pci_set_drvdata (dev, NULL);
+		kfree (priv);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
+{
+	struct parport_serial_private *priv = pci_get_drvdata (dev);
+	int i;
+
+	// Serial ports
+	for (i = 0; i < priv->num_ser; i++) {
+		unregister_serial (priv->line[i]);
+
+		if (priv->ser.init_fn)
+			(priv->ser.init_fn) (dev, &priv->ser, 0);
+	}
+	pci_set_drvdata (dev, NULL);
+	
+	// Parallel ports
+	for (i = 0; i < priv->num_par; i++)
+		parport_pc_unregister_port (priv->port[i]);
+
+	kfree (priv);
+	return;
+}
+
+static struct pci_driver parport_serial_pci_driver = {
+	.name		= "parport_serial",
+	.id_table	= parport_serial_pci_tbl,
+	.probe		= parport_serial_pci_probe,
+	.remove		= __devexit_p(parport_serial_pci_remove),
+};
+
+
+static int __init parport_serial_init (void)
+{
+	return pci_module_init (&parport_serial_pci_driver);
+}
+
+static void __exit parport_serial_exit (void)
+{
+	pci_unregister_driver (&parport_serial_pci_driver);
+	return;
+}
+
+MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
+MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
+MODULE_LICENSE("GPL");
+
+module_init(parport_serial_init);
+module_exit(parport_serial_exit);
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
new file mode 100644
index 000000000000..36a1556e64c7
--- /dev/null
+++ b/drivers/parport/parport_sunbpp.c
@@ -0,0 +1,412 @@
+/* $Id: parport_sunbpp.c,v 1.12 2001/05/26 03:01:42 davem Exp $
+ * Parallel-port routines for Sun architecture
+ * 
+ * Author: Derrick J. Brashear <shadow@dementia.org>
+ *
+ * based on work by:
+ *          Phil Blundell <philb@gnu.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell <campbell@tirian.che.curtin.edu.au>
+ *          Grant Guenther <grant@torque.net>
+ *          Eddie C. Dost <ecd@skynet.be>
+ *          Stephen Williams (steve@icarus.com)
+ *          Gus Baldauf (gbaldauf@ix.netcom.com)
+ *          Peter Zaitcev
+ *          Tom Dyas
+ */
+
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#include <linux/parport.h>
+
+#include <asm/ptrace.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/oplib.h>           /* OpenProm Library */
+#include <asm/sbus.h>
+#include <asm/dma.h>             /* BPP uses LSI 64854 for DMA */
+#include <asm/irq.h>
+#include <asm/sunbpp.h>
+
+#undef __SUNBPP_DEBUG
+#ifdef __SUNBPP_DEBUG
+#define dprintk(x) printk x
+#else
+#define dprintk(x)
+#endif
+
+static irqreturn_t parport_sunbpp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	parport_generic_irq(irq, (struct parport *) dev_id, regs);
+	return IRQ_HANDLED;
+}
+
+static void parport_sunbpp_disable_irq(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	u32 tmp;
+
+	tmp = sbus_readl(&regs->p_csr);
+	tmp &= ~DMA_INT_ENAB;
+	sbus_writel(tmp, &regs->p_csr);
+}
+
+static void parport_sunbpp_enable_irq(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	u32 tmp;
+
+	tmp = sbus_readl(&regs->p_csr);
+	tmp |= DMA_INT_ENAB;
+	sbus_writel(tmp, &regs->p_csr);
+}
+
+static void parport_sunbpp_write_data(struct parport *p, unsigned char d)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+
+	sbus_writeb(d, &regs->p_dr);
+	dprintk((KERN_DEBUG "wrote 0x%x\n", d));
+}
+
+static unsigned char parport_sunbpp_read_data(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+
+	return sbus_readb(&regs->p_dr);
+}
+
+#if 0
+static void control_pc_to_sunbpp(struct parport *p, unsigned char status)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_or = sbus_readb(&regs->p_or);
+
+	if (status & PARPORT_CONTROL_STROBE) 
+		value_tcr |= P_TCR_DS;
+	if (status & PARPORT_CONTROL_AUTOFD) 
+		value_or |= P_OR_AFXN;
+	if (status & PARPORT_CONTROL_INIT) 
+		value_or |= P_OR_INIT;
+	if (status & PARPORT_CONTROL_SELECT) 
+		value_or |= P_OR_SLCT_IN;
+
+	sbus_writeb(value_or, &regs->p_or);
+	sbus_writeb(value_tcr, &regs->p_tcr);
+}
+#endif
+
+static unsigned char status_sunbpp_to_pc(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char bits = 0;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_ir = sbus_readb(&regs->p_ir);
+
+	if (!(value_ir & P_IR_ERR))
+		bits |= PARPORT_STATUS_ERROR;
+	if (!(value_ir & P_IR_SLCT))
+		bits |= PARPORT_STATUS_SELECT;
+	if (!(value_ir & P_IR_PE))
+		bits |= PARPORT_STATUS_PAPEROUT;
+	if (value_tcr & P_TCR_ACK)
+		bits |= PARPORT_STATUS_ACK;
+	if (!(value_tcr & P_TCR_BUSY))
+		bits |= PARPORT_STATUS_BUSY;
+
+	dprintk((KERN_DEBUG "tcr 0x%x ir 0x%x\n", regs->p_tcr, regs->p_ir));
+	dprintk((KERN_DEBUG "read status 0x%x\n", bits));
+	return bits;
+}
+
+static unsigned char control_sunbpp_to_pc(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char bits = 0;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_or = sbus_readb(&regs->p_or);
+
+	if (!(value_tcr & P_TCR_DS))
+		bits |= PARPORT_CONTROL_STROBE;
+	if (!(value_or & P_OR_AFXN))
+		bits |= PARPORT_CONTROL_AUTOFD;
+	if (!(value_or & P_OR_INIT))
+		bits |= PARPORT_CONTROL_INIT;
+	if (value_or & P_OR_SLCT_IN)
+		bits |= PARPORT_CONTROL_SELECT;
+
+	dprintk((KERN_DEBUG "tcr 0x%x or 0x%x\n", regs->p_tcr, regs->p_or));
+	dprintk((KERN_DEBUG "read control 0x%x\n", bits));
+	return bits;
+}
+
+static unsigned char parport_sunbpp_read_control(struct parport *p)
+{
+	return control_sunbpp_to_pc(p);
+}
+
+static unsigned char parport_sunbpp_frob_control(struct parport *p,
+						 unsigned char mask,
+						 unsigned char val)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_or = sbus_readb(&regs->p_or);
+
+	dprintk((KERN_DEBUG "frob1: tcr 0x%x or 0x%x\n", regs->p_tcr, regs->p_or));
+	if (mask & PARPORT_CONTROL_STROBE) {
+		if (val & PARPORT_CONTROL_STROBE) {
+			value_tcr &= ~P_TCR_DS;
+		} else {
+			value_tcr |= P_TCR_DS;
+		}
+	}
+	if (mask & PARPORT_CONTROL_AUTOFD) {
+		if (val & PARPORT_CONTROL_AUTOFD) {
+			value_or &= ~P_OR_AFXN;
+		} else {
+			value_or |= P_OR_AFXN;
+		}
+	}
+	if (mask & PARPORT_CONTROL_INIT) {
+		if (val & PARPORT_CONTROL_INIT) {
+			value_or &= ~P_OR_INIT;
+		} else {
+			value_or |= P_OR_INIT;
+		}
+	}
+	if (mask & PARPORT_CONTROL_SELECT) {
+		if (val & PARPORT_CONTROL_SELECT) {
+			value_or |= P_OR_SLCT_IN;
+		} else {
+			value_or &= ~P_OR_SLCT_IN;
+		}
+	}
+
+	sbus_writeb(value_or, &regs->p_or);
+	sbus_writeb(value_tcr, &regs->p_tcr);
+	dprintk((KERN_DEBUG "frob2: tcr 0x%x or 0x%x\n", regs->p_tcr, regs->p_or));
+	return parport_sunbpp_read_control(p);
+}
+
+static void parport_sunbpp_write_control(struct parport *p, unsigned char d)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	parport_sunbpp_frob_control (p, wm, d & wm);
+}
+
+static unsigned char parport_sunbpp_read_status(struct parport *p)
+{
+	return status_sunbpp_to_pc(p);
+}
+
+static void parport_sunbpp_data_forward (struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+
+	dprintk((KERN_DEBUG "forward\n"));
+	value_tcr &= ~P_TCR_DIR;
+	sbus_writeb(value_tcr, &regs->p_tcr);
+}
+
+static void parport_sunbpp_data_reverse (struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	u8 val = sbus_readb(&regs->p_tcr);
+
+	dprintk((KERN_DEBUG "reverse\n"));
+	val |= P_TCR_DIR;
+	sbus_writeb(val, &regs->p_tcr);
+}
+
+static void parport_sunbpp_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.pc.ctr = 0xc;
+	s->u.pc.ecr = 0x0;
+}
+
+static void parport_sunbpp_save_state(struct parport *p, struct parport_state *s)
+{
+	s->u.pc.ctr = parport_sunbpp_read_control(p);
+}
+
+static void parport_sunbpp_restore_state(struct parport *p, struct parport_state *s)
+{
+	parport_sunbpp_write_control(p, s->u.pc.ctr);
+}
+
+static struct parport_operations parport_sunbpp_ops = 
+{
+	.write_data	= parport_sunbpp_write_data,
+	.read_data	= parport_sunbpp_read_data,
+
+	.write_control	= parport_sunbpp_write_control,
+	.read_control	= parport_sunbpp_read_control,
+	.frob_control	= parport_sunbpp_frob_control,
+
+	.read_status	= parport_sunbpp_read_status,
+
+	.enable_irq	= parport_sunbpp_enable_irq,
+	.disable_irq	= parport_sunbpp_disable_irq,
+
+	.data_forward	= parport_sunbpp_data_forward,
+	.data_reverse	= parport_sunbpp_data_reverse,
+
+	.init_state	= parport_sunbpp_init_state,
+	.save_state	= parport_sunbpp_save_state,
+	.restore_state	= parport_sunbpp_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+typedef struct {
+	struct list_head list;
+	struct parport *port;
+} Node;
+/* no locks, everything's serialized */
+static LIST_HEAD(port_list);
+
+static int __init init_one_port(struct sbus_dev *sdev)
+{
+	struct parport *p;
+	/* at least in theory there may be a "we don't dma" case */
+	struct parport_operations *ops;
+	void __iomem *base;
+	int irq, dma, err = 0, size;
+	struct bpp_regs __iomem *regs;
+	unsigned char value_tcr;
+	Node *node;
+
+	dprintk((KERN_DEBUG "init_one_port(%p): ranges, alloc_io, ", sdev));
+	node = kmalloc(sizeof(Node), GFP_KERNEL);
+	if (!node)
+		goto out0;
+
+	irq = sdev->irqs[0];
+	base = sbus_ioremap(&sdev->resource[0], 0,
+			    sdev->reg_addrs[0].reg_size, 
+			    "sunbpp");
+	if (!base)
+		goto out1;
+
+	size = sdev->reg_addrs[0].reg_size;
+	dma = PARPORT_DMA_NONE;
+
+	dprintk(("alloc(ppops), "));
+	ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
+        if (!ops)
+		goto out2;
+
+        memcpy (ops, &parport_sunbpp_ops, sizeof (struct parport_operations));
+
+	dprintk(("register_port\n"));
+	if (!(p = parport_register_port((unsigned long)base, irq, dma, ops)))
+		goto out3;
+
+	p->size = size;
+
+	dprintk((KERN_DEBUG "init_one_port: request_irq(%08x:%p:%x:%s:%p) ",
+		p->irq, parport_sunbpp_interrupt, SA_SHIRQ, p->name, p));
+	if ((err = request_irq(p->irq, parport_sunbpp_interrupt,
+			       SA_SHIRQ, p->name, p)) != 0) {
+		dprintk(("ERROR %d\n", err));
+		goto out4;
+	}
+	dprintk(("OK\n"));
+	parport_sunbpp_enable_irq(p);
+
+	regs = (struct bpp_regs __iomem *)p->base;
+	dprintk((KERN_DEBUG "forward\n"));
+	value_tcr = sbus_readb(&regs->p_tcr);
+	value_tcr &= ~P_TCR_DIR;
+	sbus_writeb(value_tcr, &regs->p_tcr);
+
+	printk(KERN_INFO "%s: sunbpp at 0x%lx\n", p->name, p->base);
+	node->port = p;
+	list_add(&node->list, &port_list);
+	parport_announce_port (p);
+
+	return 1;
+
+out4:
+	parport_put_port(p);
+out3:
+	kfree(ops);
+out2:
+	sbus_iounmap(base, size);
+out1:
+	kfree(node);
+out0:
+	return err;
+}
+
+static int __init parport_sunbpp_init(void)
+{
+        struct sbus_bus *sbus;
+        struct sbus_dev *sdev;
+	int count = 0;
+
+	for_each_sbus(sbus) {
+		for_each_sbusdev(sdev, sbus) {
+			if (!strcmp(sdev->prom_name, "SUNW,bpp"))
+				count += init_one_port(sdev);
+		}
+	}
+	return count ? 0 : -ENODEV;
+}
+
+static void __exit parport_sunbpp_exit(void)
+{
+	while (!list_empty(&port_list)) {
+		Node *node = list_entry(port_list.next, Node, list);
+		struct parport *p = node->port;
+		struct parport_operations *ops = p->ops;
+		parport_remove_port(p);
+
+		if (p->irq != PARPORT_IRQ_NONE) {
+			parport_sunbpp_disable_irq(p);
+			free_irq(p->irq, p);
+		}
+		sbus_iounmap((void __iomem *)p->base, p->size);
+		parport_put_port(p);
+		kfree (ops);
+		list_del(&node->list);
+		kfree (node);
+	}
+}
+
+MODULE_AUTHOR("Derrick J Brashear");
+MODULE_DESCRIPTION("Parport Driver for Sparc bidirectional Port");
+MODULE_SUPPORTED_DEVICE("Sparc Bidirectional Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_sunbpp_init)
+module_exit(parport_sunbpp_exit)
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
new file mode 100644
index 000000000000..c94963145e17
--- /dev/null
+++ b/drivers/parport/probe.c
@@ -0,0 +1,224 @@
+/* $Id: parport_probe.c,v 1.1 1999/07/03 08:56:17 davem Exp $
+ * Parallel port device probing code
+ *
+ * Authors:    Carsten Gross, carsten@sol.wohnheim.uni-ulm.de
+ *             Philip Blundell <philb@gnu.org>
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <asm/uaccess.h>
+
+static struct {
+	char *token;
+	char *descr;
+} classes[] = {
+	{ "",            "Legacy device" },
+	{ "PRINTER",     "Printer" },
+	{ "MODEM",       "Modem" },
+	{ "NET",         "Network device" },
+	{ "HDC",       	 "Hard disk" },
+	{ "PCMCIA",      "PCMCIA" },
+	{ "MEDIA",       "Multimedia device" },
+	{ "FDC",         "Floppy disk" },
+	{ "PORTS",       "Ports" },
+	{ "SCANNER",     "Scanner" },
+	{ "DIGICAM",     "Digital camera" },
+	{ "",            "Unknown device" },
+	{ "",            "Unspecified" },
+	{ "SCSIADAPTER", "SCSI adapter" },
+	{ NULL,          NULL }
+};
+
+static void pretty_print(struct parport *port, int device)
+{
+	struct parport_device_info *info = &port->probe_info[device + 1];
+
+	printk(KERN_INFO "%s", port->name);
+
+	if (device >= 0)
+		printk (" (addr %d)", device);
+
+	printk (": %s", classes[info->class].descr);
+	if (info->class)
+		printk(", %s %s", info->mfr, info->model);
+
+	printk("\n");
+}
+
+static char *strdup(char *str)
+{
+	int n = strlen(str)+1;
+	char *s = kmalloc(n, GFP_KERNEL);
+	if (!s) return NULL;
+	return strcpy(s, str);
+}
+
+static void parse_data(struct parport *port, int device, char *str)
+{
+	char *txt = kmalloc(strlen(str)+1, GFP_KERNEL);
+	char *p = txt, *q;
+	int guessed_class = PARPORT_CLASS_UNSPEC;
+	struct parport_device_info *info = &port->probe_info[device + 1];
+
+	if (!txt) {
+		printk(KERN_WARNING "%s probe: memory squeeze\n", port->name);
+		return;
+	}
+	strcpy(txt, str);
+	while (p) {
+		char *sep;
+		q = strchr(p, ';');
+		if (q) *q = 0;
+		sep = strchr(p, ':');
+		if (sep) {
+			char *u;
+			*(sep++) = 0;
+			/* Get rid of trailing blanks */
+			u = sep + strlen (sep) - 1;
+			while (u >= p && *u == ' ')
+				*u-- = '\0';
+			u = p;
+			while (*u) {
+				*u = toupper(*u);
+				u++;
+			}
+			if (!strcmp(p, "MFG") || !strcmp(p, "MANUFACTURER")) {
+				if (info->mfr)
+					kfree (info->mfr);
+				info->mfr = strdup(sep);
+			} else if (!strcmp(p, "MDL") || !strcmp(p, "MODEL")) {
+				if (info->model)
+					kfree (info->model);
+				info->model = strdup(sep);
+			} else if (!strcmp(p, "CLS") || !strcmp(p, "CLASS")) {
+				int i;
+				if (info->class_name)
+					kfree (info->class_name);
+				info->class_name = strdup(sep);
+				for (u = sep; *u; u++)
+					*u = toupper(*u);
+				for (i = 0; classes[i].token; i++) {
+					if (!strcmp(classes[i].token, sep)) {
+						info->class = i;
+						goto rock_on;
+					}
+				}
+				printk(KERN_WARNING "%s probe: warning, class '%s' not understood.\n", port->name, sep);
+				info->class = PARPORT_CLASS_OTHER;
+			} else if (!strcmp(p, "CMD") ||
+				   !strcmp(p, "COMMAND SET")) {
+				if (info->cmdset)
+					kfree (info->cmdset);
+				info->cmdset = strdup(sep);
+				/* if it speaks printer language, it's
+				   probably a printer */
+				if (strstr(sep, "PJL") || strstr(sep, "PCL"))
+					guessed_class = PARPORT_CLASS_PRINTER;
+			} else if (!strcmp(p, "DES") || !strcmp(p, "DESCRIPTION")) {
+				if (info->description)
+					kfree (info->description);
+				info->description = strdup(sep);
+			}
+		}
+	rock_on:
+		if (q) p = q+1; else p=NULL;
+	}
+
+	/* If the device didn't tell us its class, maybe we have managed to
+	   guess one from the things it did say. */
+	if (info->class == PARPORT_CLASS_UNSPEC)
+		info->class = guessed_class;
+
+	pretty_print (port, device);
+
+	kfree(txt);
+}
+
+/* Get Std 1284 Device ID. */
+ssize_t parport_device_id (int devnum, char *buffer, size_t len)
+{
+	ssize_t retval = -ENXIO;
+	struct pardevice *dev = parport_open (devnum, "Device ID probe",
+					      NULL, NULL, NULL, 0, NULL);
+	if (!dev)
+		return -ENXIO;
+
+	parport_claim_or_block (dev);
+
+	/* Negotiate to compatibility mode, and then to device ID mode.
+	 * (This is in case we are already in device ID mode.) */
+	parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+	retval = parport_negotiate (dev->port,
+				    IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID);
+
+	if (!retval) {
+		int idlen;
+		unsigned char length[2];
+
+		/* First two bytes are MSB,LSB of inclusive length. */
+		retval = parport_read (dev->port, length, 2);
+
+		if (retval != 2) goto end_id;
+
+		idlen = (length[0] << 8) + length[1] - 2;
+		/*
+		 * Check if the caller-allocated buffer is large enough
+		 * otherwise bail out or there will be an at least off by one.
+		 */
+		if (idlen + 1 < len)
+			len = idlen;
+		else {
+			retval = -EINVAL;
+			goto out;
+		}
+		retval = parport_read (dev->port, buffer, len);
+
+		if (retval != len)
+			printk (KERN_DEBUG "%s: only read %Zd of %Zd ID bytes\n",
+				dev->port->name, retval,
+				len);
+
+		/* Some printer manufacturers mistakenly believe that
+                   the length field is supposed to be _exclusive_.
+		   In addition, there are broken devices out there
+                   that don't even finish off with a semi-colon. */
+		if (buffer[len - 1] != ';') {
+			ssize_t diff;
+			diff = parport_read (dev->port, buffer + len, 2);
+			retval += diff;
+
+			if (diff)
+				printk (KERN_DEBUG
+					"%s: device reported incorrect "
+					"length field (%d, should be %Zd)\n",
+					dev->port->name, idlen, retval);
+			else {
+				/* One semi-colon short of a device ID. */
+				buffer[len++] = ';';
+				printk (KERN_DEBUG "%s: faking semi-colon\n",
+					dev->port->name);
+
+				/* If we get here, I don't think we
+                                   need to worry about the possible
+                                   standard violation of having read
+                                   more than we were told to.  The
+                                   device is non-compliant anyhow. */
+			}
+		}
+
+	end_id:
+		buffer[len] = '\0';
+		parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+	}
+
+	if (retval > 2)
+		parse_data (dev->port, dev->daisy, buffer);
+
+out:
+	parport_release (dev);
+	parport_close (dev);
+	return retval;
+}
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
new file mode 100644
index 000000000000..cbe17184b9c7
--- /dev/null
+++ b/drivers/parport/procfs.c
@@ -0,0 +1,533 @@
+/* Sysctl interface for parport devices.
+ * 
+ * Authors: David Campbell <campbell@torque.net>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *          Philip Blundell <philb@gnu.org>
+ *          Andrea Arcangeli
+ *          Riccardo Facchetti <fizban@tin.it>
+ *
+ * based on work by Grant Guenther <grant@torque.net>
+ *              and Philip Blundell
+ *
+ * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
+ */
+
+#include <linux/string.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/parport.h>
+#include <linux/ctype.h>
+#include <linux/sysctl.h>
+
+#include <asm/uaccess.h>
+
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
+
+#define PARPORT_MIN_TIMESLICE_VALUE 1ul 
+#define PARPORT_MAX_TIMESLICE_VALUE ((unsigned long) HZ)
+#define PARPORT_MIN_SPINTIME_VALUE 1
+#define PARPORT_MAX_SPINTIME_VALUE 1000
+
+static int do_active_device(ctl_table *table, int write, struct file *filp,
+		      void __user *result, size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[256];
+	struct pardevice *dev;
+	int len = 0;
+
+	if (write)		/* can't happen anyway */
+		return -EACCES;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+	
+	for (dev = port->devices; dev ; dev = dev->next) {
+		if(dev == port->cad) {
+			len += sprintf(buffer, "%s\n", dev->name);
+		}
+	}
+
+	if(!len) {
+		len += sprintf(buffer, "%s\n", "none");
+	}
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+#ifdef CONFIG_PARPORT_1284
+static int do_autoprobe(ctl_table *table, int write, struct file *filp,
+			void __user *result, size_t *lenp, loff_t *ppos)
+{
+	struct parport_device_info *info = table->extra2;
+	const char *str;
+	char buffer[256];
+	int len = 0;
+
+	if (write) /* permissions stop this */
+		return -EACCES;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+	
+	if ((str = info->class_name) != NULL)
+		len += sprintf (buffer + len, "CLASS:%s;\n", str);
+
+	if ((str = info->model) != NULL)
+		len += sprintf (buffer + len, "MODEL:%s;\n", str);
+
+	if ((str = info->mfr) != NULL)
+		len += sprintf (buffer + len, "MANUFACTURER:%s;\n", str);
+
+	if ((str = info->description) != NULL)
+		len += sprintf (buffer + len, "DESCRIPTION:%s;\n", str);
+
+	if ((str = info->cmdset) != NULL)
+		len += sprintf (buffer + len, "COMMAND SET:%s;\n", str);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user (result, buffer, len) ? -EFAULT : 0;
+}
+#endif /* IEEE1284.3 support. */
+
+static int do_hardware_base_addr (ctl_table *table, int write,
+				  struct file *filp, void __user *result,
+				  size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[20];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	len += sprintf (buffer, "%lu\t%lu\n", port->base, port->base_hi);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+static int do_hardware_irq (ctl_table *table, int write,
+			    struct file *filp, void __user *result,
+			    size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[20];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	len += sprintf (buffer, "%d\n", port->irq);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+static int do_hardware_dma (ctl_table *table, int write,
+			    struct file *filp, void __user *result,
+			    size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[20];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	len += sprintf (buffer, "%d\n", port->dma);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+static int do_hardware_modes (ctl_table *table, int write,
+			      struct file *filp, void __user *result,
+			      size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[40];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	{
+#define printmode(x) {if(port->modes&PARPORT_MODE_##x){len+=sprintf(buffer+len,"%s%s",f?",":"",#x);f++;}}
+		int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT);
+		printmode(EPP);
+		printmode(ECP);
+		printmode(DMA);
+#undef printmode
+	}
+	buffer[len++] = '\n';
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+#define PARPORT_PORT_DIR(child) { 0, NULL, NULL, 0, 0555, child }
+#define PARPORT_PARPORT_DIR(child) { DEV_PARPORT, "parport", \
+                                     NULL, 0, 0555, child }
+#define PARPORT_DEV_DIR(child) { CTL_DEV, "dev", NULL, 0, 0555, child }
+#define PARPORT_DEVICES_ROOT_DIR  { DEV_PARPORT_DEVICES, "devices", \
+                                    NULL, 0, 0555, NULL }
+
+static const unsigned long parport_min_timeslice_value =
+PARPORT_MIN_TIMESLICE_VALUE;
+
+static const unsigned long parport_max_timeslice_value =
+PARPORT_MAX_TIMESLICE_VALUE;
+
+static const  int parport_min_spintime_value =
+PARPORT_MIN_SPINTIME_VALUE;
+
+static const int parport_max_spintime_value =
+PARPORT_MAX_SPINTIME_VALUE;
+
+
+struct parport_sysctl_table {
+	struct ctl_table_header *sysctl_header;
+	ctl_table vars[12];
+	ctl_table device_dir[2];
+	ctl_table port_dir[2];
+	ctl_table parport_dir[2];
+	ctl_table dev_dir[2];
+};
+
+static const struct parport_sysctl_table parport_sysctl_template = {
+	NULL,
+        {
+		{ DEV_PARPORT_SPINTIME, "spintime",
+		  NULL, sizeof(int), 0644, NULL,
+		  &proc_dointvec_minmax, NULL, NULL,
+		  (void*) &parport_min_spintime_value,
+		  (void*) &parport_max_spintime_value },
+		{ DEV_PARPORT_BASE_ADDR, "base-addr",
+		  NULL, 0, 0444, NULL,
+		  &do_hardware_base_addr },
+		{ DEV_PARPORT_IRQ, "irq",
+		  NULL, 0, 0444, NULL,
+		  &do_hardware_irq },
+		{ DEV_PARPORT_DMA, "dma",
+		  NULL, 0, 0444, NULL,
+		  &do_hardware_dma },
+		{ DEV_PARPORT_MODES, "modes",
+		  NULL, 0, 0444, NULL,
+		  &do_hardware_modes },
+		PARPORT_DEVICES_ROOT_DIR,
+#ifdef CONFIG_PARPORT_1284
+		{ DEV_PARPORT_AUTOPROBE, "autoprobe",
+		  NULL, 0, 0444, NULL,
+		  &do_autoprobe },
+		{ DEV_PARPORT_AUTOPROBE + 1, "autoprobe0",
+		 NULL, 0, 0444, NULL,
+		 &do_autoprobe },
+		{ DEV_PARPORT_AUTOPROBE + 2, "autoprobe1",
+		  NULL, 0, 0444, NULL,
+		  &do_autoprobe },
+		{ DEV_PARPORT_AUTOPROBE + 3, "autoprobe2",
+		  NULL, 0, 0444, NULL,
+		  &do_autoprobe },
+		{ DEV_PARPORT_AUTOPROBE + 4, "autoprobe3",
+		  NULL, 0, 0444, NULL,
+		  &do_autoprobe },
+#endif /* IEEE 1284 support */
+		{0}
+	},
+	{ {DEV_PARPORT_DEVICES_ACTIVE, "active", NULL, 0, 0444, NULL,
+	  &do_active_device }, {0}},
+	{ PARPORT_PORT_DIR(NULL), {0}},
+	{ PARPORT_PARPORT_DIR(NULL), {0}},
+	{ PARPORT_DEV_DIR(NULL), {0}}
+};
+
+struct parport_device_sysctl_table
+{
+	struct ctl_table_header *sysctl_header;
+	ctl_table vars[2];
+	ctl_table device_dir[2];
+	ctl_table devices_root_dir[2];
+	ctl_table port_dir[2];
+	ctl_table parport_dir[2];
+	ctl_table dev_dir[2];
+};
+
+static const struct parport_device_sysctl_table
+parport_device_sysctl_template = {
+	NULL,
+	{
+		{ DEV_PARPORT_DEVICE_TIMESLICE, "timeslice",
+		  NULL, sizeof(int), 0644, NULL,
+		  &proc_doulongvec_ms_jiffies_minmax, NULL, NULL,
+		  (void*) &parport_min_timeslice_value,
+		  (void*) &parport_max_timeslice_value },
+	},
+	{ {0, NULL, NULL, 0, 0555, NULL}, {0}},
+	{ PARPORT_DEVICES_ROOT_DIR, {0}},
+	{ PARPORT_PORT_DIR(NULL), {0}},
+	{ PARPORT_PARPORT_DIR(NULL), {0}},
+	{ PARPORT_DEV_DIR(NULL), {0}}
+};
+
+struct parport_default_sysctl_table
+{
+	struct ctl_table_header *sysctl_header;
+	ctl_table vars[3];
+        ctl_table default_dir[2];
+	ctl_table parport_dir[2];
+	ctl_table dev_dir[2];
+};
+
+extern unsigned long parport_default_timeslice;
+extern int parport_default_spintime;
+
+static struct parport_default_sysctl_table
+parport_default_sysctl_table = {
+	NULL,
+	{
+		{ DEV_PARPORT_DEFAULT_TIMESLICE, "timeslice",
+		  &parport_default_timeslice,
+		  sizeof(parport_default_timeslice), 0644, NULL,
+		  &proc_doulongvec_ms_jiffies_minmax, NULL, NULL,
+		  (void*) &parport_min_timeslice_value,
+		  (void*) &parport_max_timeslice_value },
+		{ DEV_PARPORT_DEFAULT_SPINTIME, "spintime",
+		  &parport_default_spintime,
+		  sizeof(parport_default_spintime), 0644, NULL,
+		  &proc_dointvec_minmax, NULL, NULL,
+		  (void*) &parport_min_spintime_value,
+		  (void*) &parport_max_spintime_value },
+		{0}
+	},
+	{ { DEV_PARPORT_DEFAULT, "default", NULL, 0, 0555,
+	    parport_default_sysctl_table.vars },{0}},
+	{
+	PARPORT_PARPORT_DIR(parport_default_sysctl_table.default_dir), 
+	{0}},
+	{ PARPORT_DEV_DIR(parport_default_sysctl_table.parport_dir), {0}}
+};
+
+
+int parport_proc_register(struct parport *port)
+{
+	struct parport_sysctl_table *t;
+	int i;
+
+	t = kmalloc(sizeof(*t), GFP_KERNEL);
+	if (t == NULL)
+		return -ENOMEM;
+	memcpy(t, &parport_sysctl_template, sizeof(*t));
+
+	t->device_dir[0].extra1 = port;
+
+	for (i = 0; i < 8; i++)
+		t->vars[i].extra1 = port;
+
+	t->vars[0].data = &port->spintime;
+	t->vars[5].child = t->device_dir;
+	
+	for (i = 0; i < 5; i++)
+		t->vars[6 + i].extra2 = &port->probe_info[i];
+
+	t->port_dir[0].procname = port->name;
+	t->port_dir[0].ctl_name = port->number + 1; /* nb 0 isn't legal here */
+
+	t->port_dir[0].child = t->vars;
+	t->parport_dir[0].child = t->port_dir;
+	t->dev_dir[0].child = t->parport_dir;
+
+	t->sysctl_header = register_sysctl_table(t->dev_dir, 0);
+	if (t->sysctl_header == NULL) {
+		kfree(t);
+		t = NULL;
+	}
+	port->sysctl_table = t;
+	return 0;
+}
+
+int parport_proc_unregister(struct parport *port)
+{
+	if (port->sysctl_table) {
+		struct parport_sysctl_table *t = port->sysctl_table;
+		port->sysctl_table = NULL;
+		unregister_sysctl_table(t->sysctl_header);
+		kfree(t);
+	}
+	return 0;
+}
+
+int parport_device_proc_register(struct pardevice *device)
+{
+	struct parport_device_sysctl_table *t;
+	struct parport * port = device->port;
+	
+	t = kmalloc(sizeof(*t), GFP_KERNEL);
+	if (t == NULL)
+		return -ENOMEM;
+	memcpy(t, &parport_device_sysctl_template, sizeof(*t));
+
+	t->dev_dir[0].child = t->parport_dir;
+	t->parport_dir[0].child = t->port_dir;
+	t->port_dir[0].procname = port->name;
+	t->port_dir[0].ctl_name = port->number + 1; /* nb 0 isn't legal here */
+	t->port_dir[0].child = t->devices_root_dir;
+	t->devices_root_dir[0].child = t->device_dir;
+
+#ifdef CONFIG_PARPORT_1284
+
+	t->device_dir[0].ctl_name =
+		parport_device_num(port->number, port->muxport,
+				   device->daisy)
+		+ 1;  /* nb 0 isn't legal here */ 
+
+#else /* No IEEE 1284 support */
+
+	/* parport_device_num isn't available. */
+	t->device_dir[0].ctl_name = 1;
+	
+#endif /* IEEE 1284 support or not */
+
+	t->device_dir[0].procname = device->name;
+	t->device_dir[0].extra1 = device;
+	t->device_dir[0].child = t->vars;
+	t->vars[0].data = &device->timeslice;
+
+	t->sysctl_header = register_sysctl_table(t->dev_dir, 0);
+	if (t->sysctl_header == NULL) {
+		kfree(t);
+		t = NULL;
+	}
+	device->sysctl_table = t;
+	return 0;
+}
+
+int parport_device_proc_unregister(struct pardevice *device)
+{
+	if (device->sysctl_table) {
+		struct parport_device_sysctl_table *t = device->sysctl_table;
+		device->sysctl_table = NULL;
+		unregister_sysctl_table(t->sysctl_header);
+		kfree(t);
+	}
+	return 0;
+}
+
+static int __init parport_default_proc_register(void)
+{
+	parport_default_sysctl_table.sysctl_header =
+		register_sysctl_table(parport_default_sysctl_table.dev_dir, 0);
+	return 0;
+}
+
+static void __exit parport_default_proc_unregister(void)
+{
+	if (parport_default_sysctl_table.sysctl_header) {
+		unregister_sysctl_table(parport_default_sysctl_table.
+					sysctl_header);
+		parport_default_sysctl_table.sysctl_header = NULL;
+	}
+}
+
+#else /* no sysctl or no procfs*/
+
+int parport_proc_register(struct parport *pp)
+{
+	return 0;
+}
+
+int parport_proc_unregister(struct parport *pp)
+{
+	return 0;
+}
+
+int parport_device_proc_register(struct pardevice *device)
+{
+	return 0;
+}
+
+int parport_device_proc_unregister(struct pardevice *device)
+{
+	return 0;
+}
+
+static int __init parport_default_proc_register (void)
+{
+	return 0;
+}
+
+static void __exit parport_default_proc_unregister (void)
+{
+}
+#endif
+
+module_init(parport_default_proc_register)
+module_exit(parport_default_proc_unregister)
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
new file mode 100644
index 000000000000..ae7becf7efa5
--- /dev/null
+++ b/drivers/parport/share.c
@@ -0,0 +1,1014 @@
+/* $Id: parport_share.c,v 1.15 1998/01/11 12:06:17 philip Exp $
+ * Parallel-port resource manager code.
+ * 
+ * Authors: David Campbell <campbell@tirian.che.curtin.edu.au>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *          Jose Renau <renau@acm.org>
+ *          Philip Blundell <philb@gnu.org>
+ *	    Andrea Arcangeli
+ *
+ * based on work by Grant Guenther <grant@torque.net>
+ *          and Philip Blundell
+ *
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#undef PARPORT_DEBUG_SHARING		/* undef for production */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/threads.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/kmod.h>
+
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+
+#undef PARPORT_PARANOID
+
+#define PARPORT_DEFAULT_TIMESLICE	(HZ/5)
+
+unsigned long parport_default_timeslice = PARPORT_DEFAULT_TIMESLICE;
+int parport_default_spintime =  DEFAULT_SPIN_TIME;
+
+static LIST_HEAD(portlist);
+static DEFINE_SPINLOCK(parportlist_lock);
+
+/* list of all allocated ports, sorted by ->number */
+static LIST_HEAD(all_ports);
+static DEFINE_SPINLOCK(full_list_lock);
+
+static LIST_HEAD(drivers);
+
+static DECLARE_MUTEX(registration_lock);
+
+/* What you can do to a port that's gone away.. */
+static void dead_write_lines (struct parport *p, unsigned char b){}
+static unsigned char dead_read_lines (struct parport *p) { return 0; }
+static unsigned char dead_frob_lines (struct parport *p, unsigned char b,
+			     unsigned char c) { return 0; }
+static void dead_onearg (struct parport *p){}
+static void dead_initstate (struct pardevice *d, struct parport_state *s) { }
+static void dead_state (struct parport *p, struct parport_state *s) { }
+static size_t dead_write (struct parport *p, const void *b, size_t l, int f)
+{ return 0; }
+static size_t dead_read (struct parport *p, void *b, size_t l, int f)
+{ return 0; }
+static struct parport_operations dead_ops = {
+	.write_data	= dead_write_lines,	/* data */
+	.read_data	= dead_read_lines,
+
+	.write_control	= dead_write_lines,	/* control */
+	.read_control	= dead_read_lines,
+	.frob_control	= dead_frob_lines,
+
+	.read_status	= dead_read_lines,	/* status */
+
+	.enable_irq	= dead_onearg,		/* enable_irq */
+	.disable_irq	= dead_onearg,		/* disable_irq */
+
+	.data_forward	= dead_onearg,		/* data_forward */
+	.data_reverse	= dead_onearg,		/* data_reverse */
+
+	.init_state	= dead_initstate,	/* init_state */
+	.save_state	= dead_state,
+	.restore_state	= dead_state,
+
+	.epp_write_data	= dead_write,		/* epp */
+	.epp_read_data	= dead_read,
+	.epp_write_addr	= dead_write,
+	.epp_read_addr	= dead_read,
+
+	.ecp_write_data	= dead_write,		/* ecp */
+	.ecp_read_data	= dead_read,
+	.ecp_write_addr	= dead_write,
+ 
+	.compat_write_data	= dead_write,	/* compat */
+	.nibble_read_data	= dead_read,	/* nibble */
+	.byte_read_data		= dead_read,	/* byte */
+
+	.owner		= NULL,
+};
+
+/* Call attach(port) for each registered driver. */
+static void attach_driver_chain(struct parport *port)
+{
+	/* caller has exclusive registration_lock */
+	struct parport_driver *drv;
+	list_for_each_entry(drv, &drivers, list)
+		drv->attach(port);
+}
+
+/* Call detach(port) for each registered driver. */
+static void detach_driver_chain(struct parport *port)
+{
+	struct parport_driver *drv;
+	/* caller has exclusive registration_lock */
+	list_for_each_entry(drv, &drivers, list)
+		drv->detach (port);
+}
+
+/* Ask kmod for some lowlevel drivers. */
+static void get_lowlevel_driver (void)
+{
+	/* There is no actual module called this: you should set
+	 * up an alias for modutils. */
+	request_module ("parport_lowlevel");
+}
+
+/**
+ *	parport_register_driver - register a parallel port device driver
+ *	@drv: structure describing the driver
+ *
+ *	This can be called by a parallel port device driver in order
+ *	to receive notifications about ports being found in the
+ *	system, as well as ports no longer available.
+ *
+ *	The @drv structure is allocated by the caller and must not be
+ *	deallocated until after calling parport_unregister_driver().
+ *
+ *	The driver's attach() function may block.  The port that
+ *	attach() is given will be valid for the duration of the
+ *	callback, but if the driver wants to take a copy of the
+ *	pointer it must call parport_get_port() to do so.  Calling
+ *	parport_register_device() on that port will do this for you.
+ *
+ *	The driver's detach() function may block.  The port that
+ *	detach() is given will be valid for the duration of the
+ *	callback, but if the driver wants to take a copy of the
+ *	pointer it must call parport_get_port() to do so.
+ *
+ *	Returns 0 on success.  Currently it always succeeds.
+ **/
+
+int parport_register_driver (struct parport_driver *drv)
+{
+	struct parport *port;
+
+	if (list_empty(&portlist))
+		get_lowlevel_driver ();
+
+	down(&registration_lock);
+	list_for_each_entry(port, &portlist, list)
+		drv->attach(port);
+	list_add(&drv->list, &drivers);
+	up(&registration_lock);
+
+	return 0;
+}
+
+/**
+ *	parport_unregister_driver - deregister a parallel port device driver
+ *	@drv: structure describing the driver that was given to
+ *	      parport_register_driver()
+ *
+ *	This should be called by a parallel port device driver that
+ *	has registered itself using parport_register_driver() when it
+ *	is about to be unloaded.
+ *
+ *	When it returns, the driver's attach() routine will no longer
+ *	be called, and for each port that attach() was called for, the
+ *	detach() routine will have been called.
+ *
+ *	All the driver's attach() and detach() calls are guaranteed to have
+ *	finished by the time this function returns.
+ **/
+
+void parport_unregister_driver (struct parport_driver *drv)
+{
+	struct parport *port;
+
+	down(&registration_lock);
+	list_del_init(&drv->list);
+	list_for_each_entry(port, &portlist, list)
+		drv->detach(port);
+	up(&registration_lock);
+}
+
+static void free_port (struct parport *port)
+{
+	int d;
+	spin_lock(&full_list_lock);
+	list_del(&port->full_list);
+	spin_unlock(&full_list_lock);
+	for (d = 0; d < 5; d++) {
+		if (port->probe_info[d].class_name)
+			kfree (port->probe_info[d].class_name);
+		if (port->probe_info[d].mfr)
+			kfree (port->probe_info[d].mfr);
+		if (port->probe_info[d].model)
+			kfree (port->probe_info[d].model);
+		if (port->probe_info[d].cmdset)
+			kfree (port->probe_info[d].cmdset);
+		if (port->probe_info[d].description)
+			kfree (port->probe_info[d].description);
+	}
+
+	kfree(port->name);
+	kfree(port);
+}
+
+/**
+ *	parport_get_port - increment a port's reference count
+ *	@port: the port
+ *
+ *	This ensure's that a struct parport pointer remains valid
+ *	until the matching parport_put_port() call.
+ **/
+
+struct parport *parport_get_port (struct parport *port)
+{
+	atomic_inc (&port->ref_count);
+	return port;
+}
+
+/**
+ *	parport_put_port - decrement a port's reference count
+ *	@port: the port
+ *
+ *	This should be called once for each call to parport_get_port(),
+ *	once the port is no longer needed.
+ **/
+
+void parport_put_port (struct parport *port)
+{
+	if (atomic_dec_and_test (&port->ref_count))
+		/* Can destroy it now. */
+		free_port (port);
+
+	return;
+}
+
+/**
+ *	parport_register_port - register a parallel port
+ *	@base: base I/O address
+ *	@irq: IRQ line
+ *	@dma: DMA channel
+ *	@ops: pointer to the port driver's port operations structure
+ *
+ *	When a parallel port (lowlevel) driver finds a port that
+ *	should be made available to parallel port device drivers, it
+ *	should call parport_register_port().  The @base, @irq, and
+ *	@dma parameters are for the convenience of port drivers, and
+ *	for ports where they aren't meaningful needn't be set to
+ *	anything special.  They can be altered afterwards by adjusting
+ *	the relevant members of the parport structure that is returned
+ *	and represents the port.  They should not be tampered with
+ *	after calling parport_announce_port, however.
+ *
+ *	If there are parallel port device drivers in the system that
+ *	have registered themselves using parport_register_driver(),
+ *	they are not told about the port at this time; that is done by
+ *	parport_announce_port().
+ *
+ *	The @ops structure is allocated by the caller, and must not be
+ *	deallocated before calling parport_remove_port().
+ *
+ *	If there is no memory to allocate a new parport structure,
+ *	this function will return %NULL.
+ **/
+
+struct parport *parport_register_port(unsigned long base, int irq, int dma,
+				      struct parport_operations *ops)
+{
+	struct list_head *l;
+	struct parport *tmp;
+	int num;
+	int device;
+	char *name;
+
+	tmp = kmalloc(sizeof(struct parport), GFP_KERNEL);
+	if (!tmp) {
+		printk(KERN_WARNING "parport: memory squeeze\n");
+		return NULL;
+	}
+
+	/* Init our structure */
+ 	memset(tmp, 0, sizeof(struct parport));
+	tmp->base = base;
+	tmp->irq = irq;
+	tmp->dma = dma;
+	tmp->muxport = tmp->daisy = tmp->muxsel = -1;
+	tmp->modes = 0;
+ 	INIT_LIST_HEAD(&tmp->list);
+	tmp->devices = tmp->cad = NULL;
+	tmp->flags = 0;
+	tmp->ops = ops;
+	tmp->physport = tmp;
+	memset (tmp->probe_info, 0, 5 * sizeof (struct parport_device_info));
+	rwlock_init(&tmp->cad_lock);
+	spin_lock_init(&tmp->waitlist_lock);
+	spin_lock_init(&tmp->pardevice_lock);
+	tmp->ieee1284.mode = IEEE1284_MODE_COMPAT;
+	tmp->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+	init_MUTEX_LOCKED (&tmp->ieee1284.irq); /* actually a semaphore at 0 */
+	tmp->spintime = parport_default_spintime;
+	atomic_set (&tmp->ref_count, 1);
+	INIT_LIST_HEAD(&tmp->full_list);
+
+	name = kmalloc(15, GFP_KERNEL);
+	if (!name) {
+		printk(KERN_ERR "parport: memory squeeze\n");
+		kfree(tmp);
+		return NULL;
+	}
+	/* Search for the lowest free parport number. */
+
+	spin_lock(&full_list_lock);
+	for (l = all_ports.next, num = 0; l != &all_ports; l = l->next, num++) {
+		struct parport *p = list_entry(l, struct parport, full_list);
+		if (p->number != num)
+			break;
+	}
+	tmp->portnum = tmp->number = num;
+	list_add_tail(&tmp->full_list, l);
+	spin_unlock(&full_list_lock);
+
+	/*
+	 * Now that the portnum is known finish doing the Init.
+	 */
+	sprintf(name, "parport%d", tmp->portnum = tmp->number);
+	tmp->name = name;
+
+	for (device = 0; device < 5; device++)
+		/* assume the worst */
+		tmp->probe_info[device].class = PARPORT_CLASS_LEGACY;
+
+	tmp->waithead = tmp->waittail = NULL;
+
+	return tmp;
+}
+
+/**
+ *	parport_announce_port - tell device drivers about a parallel port
+ *	@port: parallel port to announce
+ *
+ *	After a port driver has registered a parallel port with
+ *	parport_register_port, and performed any necessary
+ *	initialisation or adjustments, it should call
+ *	parport_announce_port() in order to notify all device drivers
+ *	that have called parport_register_driver().  Their attach()
+ *	functions will be called, with @port as the parameter.
+ **/
+
+void parport_announce_port (struct parport *port)
+{
+	int i;
+
+#ifdef CONFIG_PARPORT_1284
+	/* Analyse the IEEE1284.3 topology of the port. */
+	parport_daisy_init(port);
+#endif
+
+	parport_proc_register(port);
+	down(&registration_lock);
+	spin_lock_irq(&parportlist_lock);
+	list_add_tail(&port->list, &portlist);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			list_add_tail(&slave->list, &portlist);
+	}
+	spin_unlock_irq(&parportlist_lock);
+
+	/* Let drivers know that new port(s) has arrived. */
+	attach_driver_chain (port);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			attach_driver_chain(slave);
+	}
+	up(&registration_lock);
+}
+
+/**
+ *	parport_remove_port - deregister a parallel port
+ *	@port: parallel port to deregister
+ *
+ *	When a parallel port driver is forcibly unloaded, or a
+ *	parallel port becomes inaccessible, the port driver must call
+ *	this function in order to deal with device drivers that still
+ *	want to use it.
+ *
+ *	The parport structure associated with the port has its
+ *	operations structure replaced with one containing 'null'
+ *	operations that return errors or just don't do anything.
+ *
+ *	Any drivers that have registered themselves using
+ *	parport_register_driver() are notified that the port is no
+ *	longer accessible by having their detach() routines called
+ *	with @port as the parameter.
+ **/
+
+void parport_remove_port(struct parport *port)
+{
+	int i;
+
+	down(&registration_lock);
+
+	/* Spread the word. */
+	detach_driver_chain (port);
+
+#ifdef CONFIG_PARPORT_1284
+	/* Forget the IEEE1284.3 topology of the port. */
+	parport_daisy_fini(port);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (!slave)
+			continue;
+		detach_driver_chain(slave);
+		parport_daisy_fini(slave);
+	}
+#endif
+
+	port->ops = &dead_ops;
+	spin_lock(&parportlist_lock);
+	list_del_init(&port->list);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			list_del_init(&slave->list);
+	}
+	spin_unlock(&parportlist_lock);
+
+	up(&registration_lock);
+
+	parport_proc_unregister(port);
+
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			parport_put_port(slave);
+	}
+}
+
+/**
+ *	parport_register_device - register a device on a parallel port
+ *	@port: port to which the device is attached
+ *	@name: a name to refer to the device
+ *	@pf: preemption callback
+ *	@kf: kick callback (wake-up)
+ *	@irq_func: interrupt handler
+ *	@flags: registration flags
+ *	@handle: data for callback functions
+ *
+ *	This function, called by parallel port device drivers,
+ *	declares that a device is connected to a port, and tells the
+ *	system all it needs to know.
+ *
+ *	The @name is allocated by the caller and must not be
+ *	deallocated until the caller calls @parport_unregister_device
+ *	for that device.
+ *
+ *	The preemption callback function, @pf, is called when this
+ *	device driver has claimed access to the port but another
+ *	device driver wants to use it.  It is given @handle as its
+ *	parameter, and should return zero if it is willing for the
+ *	system to release the port to another driver on its behalf.
+ *	If it wants to keep control of the port it should return
+ *	non-zero, and no action will be taken.  It is good manners for
+ *	the driver to try to release the port at the earliest
+ *	opportunity after its preemption callback rejects a preemption
+ *	attempt.  Note that if a preemption callback is happy for
+ *	preemption to go ahead, there is no need to release the port;
+ *	it is done automatically.  This function may not block, as it
+ *	may be called from interrupt context.  If the device driver
+ *	does not support preemption, @pf can be %NULL.
+ *
+ *	The wake-up ("kick") callback function, @kf, is called when
+ *	the port is available to be claimed for exclusive access; that
+ *	is, parport_claim() is guaranteed to succeed when called from
+ *	inside the wake-up callback function.  If the driver wants to
+ *	claim the port it should do so; otherwise, it need not take
+ *	any action.  This function may not block, as it may be called
+ *	from interrupt context.  If the device driver does not want to
+ *	be explicitly invited to claim the port in this way, @kf can
+ *	be %NULL.
+ *
+ *	The interrupt handler, @irq_func, is called when an interrupt
+ *	arrives from the parallel port.  Note that if a device driver
+ *	wants to use interrupts it should use parport_enable_irq(),
+ *	and can also check the irq member of the parport structure
+ *	representing the port.
+ *
+ *	The parallel port (lowlevel) driver is the one that has called
+ *	request_irq() and whose interrupt handler is called first.
+ *	This handler does whatever needs to be done to the hardware to
+ *	acknowledge the interrupt (for PC-style ports there is nothing
+ *	special to be done).  It then tells the IEEE 1284 code about
+ *	the interrupt, which may involve reacting to an IEEE 1284
+ *	event depending on the current IEEE 1284 phase.  After this,
+ *	it calls @irq_func.  Needless to say, @irq_func will be called
+ *	from interrupt context, and may not block.
+ *
+ *	The %PARPORT_DEV_EXCL flag is for preventing port sharing, and
+ *	so should only be used when sharing the port with other device
+ *	drivers is impossible and would lead to incorrect behaviour.
+ *	Use it sparingly!  Normally, @flags will be zero.
+ *
+ *	This function returns a pointer to a structure that represents
+ *	the device on the port, or %NULL if there is not enough memory
+ *	to allocate space for that structure.
+ **/
+
+struct pardevice *
+parport_register_device(struct parport *port, const char *name,
+			int (*pf)(void *), void (*kf)(void *),
+			void (*irq_func)(int, void *, struct pt_regs *), 
+			int flags, void *handle)
+{
+	struct pardevice *tmp;
+
+	if (port->physport->flags & PARPORT_FLAG_EXCL) {
+		/* An exclusive device is registered. */
+		printk (KERN_DEBUG "%s: no more devices allowed\n",
+			port->name);
+		return NULL;
+	}
+
+	if (flags & PARPORT_DEV_LURK) {
+		if (!pf || !kf) {
+			printk(KERN_INFO "%s: refused to register lurking device (%s) without callbacks\n", port->name, name);
+			return NULL;
+		}
+	}
+
+	/* We up our own module reference count, and that of the port
+           on which a device is to be registered, to ensure that
+           neither of us gets unloaded while we sleep in (e.g.)
+           kmalloc.
+         */
+	if (!try_module_get(port->ops->owner)) {
+		return NULL;
+	}
+		
+	parport_get_port (port);
+
+	tmp = kmalloc(sizeof(struct pardevice), GFP_KERNEL);
+	if (tmp == NULL) {
+		printk(KERN_WARNING "%s: memory squeeze, couldn't register %s.\n", port->name, name);
+		goto out;
+	}
+
+	tmp->state = kmalloc(sizeof(struct parport_state), GFP_KERNEL);
+	if (tmp->state == NULL) {
+		printk(KERN_WARNING "%s: memory squeeze, couldn't register %s.\n", port->name, name);
+		goto out_free_pardevice;
+	}
+
+	tmp->name = name;
+	tmp->port = port;
+	tmp->daisy = -1;
+	tmp->preempt = pf;
+	tmp->wakeup = kf;
+	tmp->private = handle;
+	tmp->flags = flags;
+	tmp->irq_func = irq_func;
+	tmp->waiting = 0;
+	tmp->timeout = 5 * HZ;
+
+	/* Chain this onto the list */
+	tmp->prev = NULL;
+	/*
+	 * This function must not run from an irq handler so we don' t need
+	 * to clear irq on the local CPU. -arca
+	 */
+	spin_lock(&port->physport->pardevice_lock);
+
+	if (flags & PARPORT_DEV_EXCL) {
+		if (port->physport->devices) {
+			spin_unlock (&port->physport->pardevice_lock);
+			printk (KERN_DEBUG
+				"%s: cannot grant exclusive access for "
+				"device %s\n", port->name, name);
+			goto out_free_all;
+		}
+		port->flags |= PARPORT_FLAG_EXCL;
+	}
+
+	tmp->next = port->physport->devices;
+	wmb(); /* Make sure that tmp->next is written before it's
+                  added to the list; see comments marked 'no locking
+                  required' */
+	if (port->physport->devices)
+		port->physport->devices->prev = tmp;
+	port->physport->devices = tmp;
+	spin_unlock(&port->physport->pardevice_lock);
+
+	init_waitqueue_head(&tmp->wait_q);
+	tmp->timeslice = parport_default_timeslice;
+	tmp->waitnext = tmp->waitprev = NULL;
+
+	/*
+	 * This has to be run as last thing since init_state may need other
+	 * pardevice fields. -arca
+	 */
+	port->ops->init_state(tmp, tmp->state);
+	parport_device_proc_register(tmp);
+	return tmp;
+
+ out_free_all:
+	kfree (tmp->state);
+ out_free_pardevice:
+	kfree (tmp);
+ out:
+	parport_put_port (port);
+	module_put(port->ops->owner);
+
+	return NULL;
+}
+
+/**
+ *	parport_unregister_device - deregister a device on a parallel port
+ *	@dev: pointer to structure representing device
+ *
+ *	This undoes the effect of parport_register_device().
+ **/
+
+void parport_unregister_device(struct pardevice *dev)
+{
+	struct parport *port;
+
+#ifdef PARPORT_PARANOID
+	if (dev == NULL) {
+		printk(KERN_ERR "parport_unregister_device: passed NULL\n");
+		return;
+	}
+#endif
+
+	parport_device_proc_unregister(dev);
+
+	port = dev->port->physport;
+
+	if (port->cad == dev) {
+		printk(KERN_DEBUG "%s: %s forgot to release port\n",
+		       port->name, dev->name);
+		parport_release (dev);
+	}
+
+	spin_lock(&port->pardevice_lock);
+	if (dev->next)
+		dev->next->prev = dev->prev;
+	if (dev->prev)
+		dev->prev->next = dev->next;
+	else
+		port->devices = dev->next;
+
+	if (dev->flags & PARPORT_DEV_EXCL)
+		port->flags &= ~PARPORT_FLAG_EXCL;
+
+	spin_unlock(&port->pardevice_lock);
+
+	/* Make sure we haven't left any pointers around in the wait
+	 * list. */
+	spin_lock (&port->waitlist_lock);
+	if (dev->waitprev || dev->waitnext || port->waithead == dev) {
+		if (dev->waitprev)
+			dev->waitprev->waitnext = dev->waitnext;
+		else
+			port->waithead = dev->waitnext;
+		if (dev->waitnext)
+			dev->waitnext->waitprev = dev->waitprev;
+		else
+			port->waittail = dev->waitprev;
+	}
+	spin_unlock (&port->waitlist_lock);
+
+	kfree(dev->state);
+	kfree(dev);
+
+	module_put(port->ops->owner);
+	parport_put_port (port);
+}
+
+/**
+ *	parport_find_number - find a parallel port by number
+ *	@number: parallel port number
+ *
+ *	This returns the parallel port with the specified number, or
+ *	%NULL if there is none.
+ *
+ *	There is an implicit parport_get_port() done already; to throw
+ *	away the reference to the port that parport_find_number()
+ *	gives you, use parport_put_port().
+ */
+
+struct parport *parport_find_number (int number)
+{
+	struct parport *port, *result = NULL;
+
+	if (list_empty(&portlist))
+		get_lowlevel_driver ();
+
+	spin_lock (&parportlist_lock);
+	list_for_each_entry(port, &portlist, list) {
+		if (port->number == number) {
+			result = parport_get_port (port);
+			break;
+		}
+	}
+	spin_unlock (&parportlist_lock);
+	return result;
+}
+
+/**
+ *	parport_find_base - find a parallel port by base address
+ *	@base: base I/O address
+ *
+ *	This returns the parallel port with the specified base
+ *	address, or %NULL if there is none.
+ *
+ *	There is an implicit parport_get_port() done already; to throw
+ *	away the reference to the port that parport_find_base()
+ *	gives you, use parport_put_port().
+ */
+
+struct parport *parport_find_base (unsigned long base)
+{
+	struct parport *port, *result = NULL;
+
+	if (list_empty(&portlist))
+		get_lowlevel_driver ();
+
+	spin_lock (&parportlist_lock);
+	list_for_each_entry(port, &portlist, list) {
+		if (port->base == base) {
+			result = parport_get_port (port);
+			break;
+		}
+	}
+	spin_unlock (&parportlist_lock);
+	return result;
+}
+
+/**
+ *	parport_claim - claim access to a parallel port device
+ *	@dev: pointer to structure representing a device on the port
+ *
+ *	This function will not block and so can be used from interrupt
+ *	context.  If parport_claim() succeeds in claiming access to
+ *	the port it returns zero and the port is available to use.  It
+ *	may fail (returning non-zero) if the port is in use by another
+ *	driver and that driver is not willing to relinquish control of
+ *	the port.
+ **/
+
+int parport_claim(struct pardevice *dev)
+{
+	struct pardevice *oldcad;
+	struct parport *port = dev->port->physport;
+	unsigned long flags;
+
+	if (port->cad == dev) {
+		printk(KERN_INFO "%s: %s already owner\n",
+		       dev->port->name,dev->name);
+		return 0;
+	}
+
+	/* Preempt any current device */
+	write_lock_irqsave (&port->cad_lock, flags);
+	if ((oldcad = port->cad) != NULL) {
+		if (oldcad->preempt) {
+			if (oldcad->preempt(oldcad->private))
+				goto blocked;
+			port->ops->save_state(port, dev->state);
+		} else
+			goto blocked;
+
+		if (port->cad != oldcad) {
+			/* I think we'll actually deadlock rather than
+                           get here, but just in case.. */
+			printk(KERN_WARNING
+			       "%s: %s released port when preempted!\n",
+			       port->name, oldcad->name);
+			if (port->cad)
+				goto blocked;
+		}
+	}
+
+	/* Can't fail from now on, so mark ourselves as no longer waiting.  */
+	if (dev->waiting & 1) {
+		dev->waiting = 0;
+
+		/* Take ourselves out of the wait list again.  */
+		spin_lock_irq (&port->waitlist_lock);
+		if (dev->waitprev)
+			dev->waitprev->waitnext = dev->waitnext;
+		else
+			port->waithead = dev->waitnext;
+		if (dev->waitnext)
+			dev->waitnext->waitprev = dev->waitprev;
+		else
+			port->waittail = dev->waitprev;
+		spin_unlock_irq (&port->waitlist_lock);
+		dev->waitprev = dev->waitnext = NULL;
+	}
+
+	/* Now we do the change of devices */
+	port->cad = dev;
+
+#ifdef CONFIG_PARPORT_1284
+	/* If it's a mux port, select it. */
+	if (dev->port->muxport >= 0) {
+		/* FIXME */
+		port->muxsel = dev->port->muxport;
+	}
+
+	/* If it's a daisy chain device, select it. */
+	if (dev->daisy >= 0) {
+		/* This could be lazier. */
+		if (!parport_daisy_select (port, dev->daisy,
+					   IEEE1284_MODE_COMPAT))
+			port->daisy = dev->daisy;
+	}
+#endif /* IEEE1284.3 support */
+
+	/* Restore control registers */
+	port->ops->restore_state(port, dev->state);
+	write_unlock_irqrestore(&port->cad_lock, flags);
+	dev->time = jiffies;
+	return 0;
+
+blocked:
+	/* If this is the first time we tried to claim the port, register an
+	   interest.  This is only allowed for devices sleeping in
+	   parport_claim_or_block(), or those with a wakeup function.  */
+
+	/* The cad_lock is still held for writing here */
+	if (dev->waiting & 2 || dev->wakeup) {
+		spin_lock (&port->waitlist_lock);
+		if (test_and_set_bit(0, &dev->waiting) == 0) {
+			/* First add ourselves to the end of the wait list. */
+			dev->waitnext = NULL;
+			dev->waitprev = port->waittail;
+			if (port->waittail) {
+				port->waittail->waitnext = dev;
+				port->waittail = dev;
+			} else
+				port->waithead = port->waittail = dev;
+		}
+		spin_unlock (&port->waitlist_lock);
+	}
+	write_unlock_irqrestore (&port->cad_lock, flags);
+	return -EAGAIN;
+}
+
+/**
+ *	parport_claim_or_block - claim access to a parallel port device
+ *	@dev: pointer to structure representing a device on the port
+ *
+ *	This behaves like parport_claim(), but will block if necessary
+ *	to wait for the port to be free.  A return value of 1
+ *	indicates that it slept; 0 means that it succeeded without
+ *	needing to sleep.  A negative error code indicates failure.
+ **/
+
+int parport_claim_or_block(struct pardevice *dev)
+{
+	int r;
+
+	/* Signal to parport_claim() that we can wait even without a
+	   wakeup function.  */
+	dev->waiting = 2;
+
+	/* Try to claim the port.  If this fails, we need to sleep.  */
+	r = parport_claim(dev);
+	if (r == -EAGAIN) {
+#ifdef PARPORT_DEBUG_SHARING
+		printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n", dev->name);
+#endif
+		/*
+		 * FIXME!!! Use the proper locking for dev->waiting,
+		 * and make this use the "wait_event_interruptible()"
+		 * interfaces. The cli/sti that used to be here
+		 * did nothing.
+		 *
+		 * See also parport_release()
+		 */
+
+		/* If dev->waiting is clear now, an interrupt
+		   gave us the port and we would deadlock if we slept.  */
+		if (dev->waiting) {
+			interruptible_sleep_on (&dev->wait_q);
+			if (signal_pending (current)) {
+				return -EINTR;
+			}
+			r = 1;
+		} else {
+			r = 0;
+#ifdef PARPORT_DEBUG_SHARING
+			printk(KERN_DEBUG "%s: didn't sleep in parport_claim_or_block()\n",
+			       dev->name);
+#endif
+		}
+
+#ifdef PARPORT_DEBUG_SHARING
+		if (dev->port->physport->cad != dev)
+			printk(KERN_DEBUG "%s: exiting parport_claim_or_block "
+			       "but %s owns port!\n", dev->name,
+			       dev->port->physport->cad ?
+			       dev->port->physport->cad->name:"nobody");
+#endif
+	}
+	dev->waiting = 0;
+	return r;
+}
+
+/**
+ *	parport_release - give up access to a parallel port device
+ *	@dev: pointer to structure representing parallel port device
+ *
+ *	This function cannot fail, but it should not be called without
+ *	the port claimed.  Similarly, if the port is already claimed
+ *	you should not try claiming it again.
+ **/
+
+void parport_release(struct pardevice *dev)
+{
+	struct parport *port = dev->port->physport;
+	struct pardevice *pd;
+	unsigned long flags;
+
+	/* Make sure that dev is the current device */
+	write_lock_irqsave(&port->cad_lock, flags);
+	if (port->cad != dev) {
+		write_unlock_irqrestore (&port->cad_lock, flags);
+		printk(KERN_WARNING "%s: %s tried to release parport "
+		       "when not owner\n", port->name, dev->name);
+		return;
+	}
+
+#ifdef CONFIG_PARPORT_1284
+	/* If this is on a mux port, deselect it. */
+	if (dev->port->muxport >= 0) {
+		/* FIXME */
+		port->muxsel = -1;
+	}
+
+	/* If this is a daisy device, deselect it. */
+	if (dev->daisy >= 0) {
+		parport_daisy_deselect_all (port);
+		port->daisy = -1;
+	}
+#endif
+
+	port->cad = NULL;
+	write_unlock_irqrestore(&port->cad_lock, flags);
+
+	/* Save control registers */
+	port->ops->save_state(port, dev->state);
+
+	/* If anybody is waiting, find out who's been there longest and
+	   then wake them up. (Note: no locking required) */
+	/* !!! LOCKING IS NEEDED HERE */
+	for (pd = port->waithead; pd; pd = pd->waitnext) {
+		if (pd->waiting & 2) { /* sleeping in claim_or_block */
+			parport_claim(pd);
+			if (waitqueue_active(&pd->wait_q))
+				wake_up_interruptible(&pd->wait_q);
+			return;
+		} else if (pd->wakeup) {
+			pd->wakeup(pd->private);
+			if (dev->port->cad) /* racy but no matter */
+				return;
+		} else {
+			printk(KERN_ERR "%s: don't know how to wake %s\n", port->name, pd->name);
+		}
+	}
+
+	/* Nobody was waiting, so walk the list to see if anyone is
+	   interested in being woken up. (Note: no locking required) */
+	/* !!! LOCKING IS NEEDED HERE */
+	for (pd = port->devices; (port->cad == NULL) && pd; pd = pd->next) {
+		if (pd->wakeup && pd != dev)
+			pd->wakeup(pd->private);
+	}
+}
+
+/* Exported symbols for modules. */
+
+EXPORT_SYMBOL(parport_claim);
+EXPORT_SYMBOL(parport_claim_or_block);
+EXPORT_SYMBOL(parport_release);
+EXPORT_SYMBOL(parport_register_port);
+EXPORT_SYMBOL(parport_announce_port);
+EXPORT_SYMBOL(parport_remove_port);
+EXPORT_SYMBOL(parport_register_driver);
+EXPORT_SYMBOL(parport_unregister_driver);
+EXPORT_SYMBOL(parport_register_device);
+EXPORT_SYMBOL(parport_unregister_device);
+EXPORT_SYMBOL(parport_put_port);
+EXPORT_SYMBOL(parport_find_number);
+EXPORT_SYMBOL(parport_find_base);
+
+MODULE_LICENSE("GPL");