Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 512 insertions, 0 deletions

diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c
new file mode 100644
index 000000000000..075c7eb5c85d
--- /dev/null
+++ b/drivers/parport/daisy.c
@@ -0,0 +1,512 @@
+/*
+ * IEEE 1284.3 Parallel port daisy chain and multiplexor code
+ * 
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * ??-12-1998: Initial implementation.
+ * 31-01-1999: Make port-cloning transparent.
+ * 13-02-1999: Move DeviceID technique from parport_probe.
+ * 13-03-1999: Get DeviceID from non-IEEE 1284.3 devices too.
+ * 22-02-2000: Count devices that are actually detected.
+ *
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include <asm/current.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk (stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+static struct daisydev {
+	struct daisydev *next;
+	struct parport *port;
+	int daisy;
+	int devnum;
+} *topology = NULL;
+static DEFINE_SPINLOCK(topology_lock);
+
+static int numdevs = 0;
+
+/* Forward-declaration of lower-level functions. */
+static int mux_present (struct parport *port);
+static int num_mux_ports (struct parport *port);
+static int select_port (struct parport *port);
+static int assign_addrs (struct parport *port);
+
+/* Add a device to the discovered topology. */
+static void add_dev (int devnum, struct parport *port, int daisy)
+{
+	struct daisydev *newdev, **p;
+	newdev = kmalloc (sizeof (struct daisydev), GFP_KERNEL);
+	if (newdev) {
+		newdev->port = port;
+		newdev->daisy = daisy;
+		newdev->devnum = devnum;
+		spin_lock(&topology_lock);
+		for (p = &topology; *p && (*p)->devnum<devnum; p = &(*p)->next)
+			;
+		newdev->next = *p;
+		*p = newdev;
+		spin_unlock(&topology_lock);
+	}
+}
+
+/* Clone a parport (actually, make an alias). */
+static struct parport *clone_parport (struct parport *real, int muxport)
+{
+	struct parport *extra = parport_register_port (real->base,
+						       real->irq,
+						       real->dma,
+						       real->ops);
+	if (extra) {
+		extra->portnum = real->portnum;
+		extra->physport = real;
+		extra->muxport = muxport;
+		real->slaves[muxport-1] = extra;
+	}
+
+	return extra;
+}
+
+/* Discover the IEEE1284.3 topology on a port -- muxes and daisy chains.
+ * Return value is number of devices actually detected. */
+int parport_daisy_init (struct parport *port)
+{
+	int detected = 0;
+	char *deviceid;
+	static const char *th[] = { /*0*/"th", "st", "nd", "rd", "th" };
+	int num_ports;
+	int i;
+	int last_try = 0;
+
+again:
+	/* Because this is called before any other devices exist,
+	 * we don't have to claim exclusive access.  */
+
+	/* If mux present on normal port, need to create new
+	 * parports for each extra port. */
+	if (port->muxport < 0 && mux_present (port) &&
+	    /* don't be fooled: a mux must have 2 or 4 ports. */
+	    ((num_ports = num_mux_ports (port)) == 2 || num_ports == 4)) {
+		/* Leave original as port zero. */
+		port->muxport = 0;
+		printk (KERN_INFO
+			"%s: 1st (default) port of %d-way multiplexor\n",
+			port->name, num_ports);
+		for (i = 1; i < num_ports; i++) {
+			/* Clone the port. */
+			struct parport *extra = clone_parport (port, i);
+			if (!extra) {
+				if (signal_pending (current))
+					break;
+
+				schedule ();
+				continue;
+			}
+
+			printk (KERN_INFO
+				"%s: %d%s port of %d-way multiplexor on %s\n",
+				extra->name, i + 1, th[i + 1], num_ports,
+				port->name);
+
+			/* Analyse that port too.  We won't recurse
+			   forever because of the 'port->muxport < 0'
+			   test above. */
+			parport_daisy_init(extra);
+		}
+	}
+
+	if (port->muxport >= 0)
+		select_port (port);
+
+	parport_daisy_deselect_all (port);
+	detected += assign_addrs (port);
+
+	/* Count the potential legacy device at the end. */
+	add_dev (numdevs++, port, -1);
+
+	/* Find out the legacy device's IEEE 1284 device ID. */
+	deviceid = kmalloc (1000, GFP_KERNEL);
+	if (deviceid) {
+		if (parport_device_id (numdevs - 1, deviceid, 1000) > 2)
+			detected++;
+
+		kfree (deviceid);
+	}
+
+	if (!detected && !last_try) {
+		/* No devices were detected.  Perhaps they are in some
+                   funny state; let's try to reset them and see if
+                   they wake up. */
+		parport_daisy_fini (port);
+		parport_write_control (port, PARPORT_CONTROL_SELECT);
+		udelay (50);
+		parport_write_control (port,
+				       PARPORT_CONTROL_SELECT |
+				       PARPORT_CONTROL_INIT);
+		udelay (50);
+		last_try = 1;
+		goto again;
+	}
+
+	return detected;
+}
+
+/* Forget about devices on a physical port. */
+void parport_daisy_fini (struct parport *port)
+{
+	struct daisydev **p;
+
+	spin_lock(&topology_lock);
+	p = &topology;
+	while (*p) {
+		struct daisydev *dev = *p;
+		if (dev->port != port) {
+			p = &dev->next;
+			continue;
+		}
+		*p = dev->next;
+		kfree(dev);
+	}
+
+	/* Gaps in the numbering could be handled better.  How should
+           someone enumerate through all IEEE1284.3 devices in the
+           topology?. */
+	if (!topology) numdevs = 0;
+	spin_unlock(&topology_lock);
+	return;
+}
+
+/**
+ *	parport_open - find a device by canonical device number
+ *	@devnum: canonical device number
+ *	@name: name to associate with the device
+ *	@pf: preemption callback
+ *	@kf: kick callback
+ *	@irqf: interrupt handler
+ *	@flags: registration flags
+ *	@handle: driver data
+ *
+ *	This function is similar to parport_register_device(), except
+ *	that it locates a device by its number rather than by the port
+ *	it is attached to.
+ *
+ *	All parameters except for @devnum are the same as for
+ *	parport_register_device().  The return value is the same as
+ *	for parport_register_device().
+ **/
+
+struct pardevice *parport_open (int devnum, const char *name,
+				int (*pf) (void *), void (*kf) (void *),
+				void (*irqf) (int, void *, struct pt_regs *),
+				int flags, void *handle)
+{
+	struct daisydev *p = topology;
+	struct parport *port;
+	struct pardevice *dev;
+	int daisy;
+
+	spin_lock(&topology_lock);
+	while (p && p->devnum != devnum)
+		p = p->next;
+
+	if (!p) {
+		spin_unlock(&topology_lock);
+		return NULL;
+	}
+
+	daisy = p->daisy;
+	port = parport_get_port(p->port);
+	spin_unlock(&topology_lock);
+
+	dev = parport_register_device (port, name, pf, kf,
+				       irqf, flags, handle);
+	parport_put_port(port);
+	if (!dev)
+		return NULL;
+
+	dev->daisy = daisy;
+
+	/* Check that there really is a device to select. */
+	if (daisy >= 0) {
+		int selected;
+		parport_claim_or_block (dev);
+		selected = port->daisy;
+		parport_release (dev);
+
+		if (selected != port->daisy) {
+			/* No corresponding device. */
+			parport_unregister_device (dev);
+			return NULL;
+		}
+	}
+
+	return dev;
+}
+
+/**
+ *	parport_close - close a device opened with parport_open()
+ *	@dev: device to close
+ *
+ *	This is to parport_open() as parport_unregister_device() is to
+ *	parport_register_device().
+ **/
+
+void parport_close (struct pardevice *dev)
+{
+	parport_unregister_device (dev);
+}
+
+/**
+ *	parport_device_num - convert device coordinates
+ *	@parport: parallel port number
+ *	@mux: multiplexor port number (-1 for no multiplexor)
+ *	@daisy: daisy chain address (-1 for no daisy chain address)
+ *
+ *	This tries to locate a device on the given parallel port,
+ *	multiplexor port and daisy chain address, and returns its
+ *	device number or -NXIO if no device with those coordinates
+ *	exists.
+ **/
+
+int parport_device_num (int parport, int mux, int daisy)
+{
+	int res = -ENXIO;
+	struct daisydev *dev;
+
+	spin_lock(&topology_lock);
+	dev = topology;
+	while (dev && dev->port->portnum != parport &&
+	       dev->port->muxport != mux && dev->daisy != daisy)
+		dev = dev->next;
+	if (dev)
+		res = dev->devnum;
+	spin_unlock(&topology_lock);
+
+	return res;
+}
+
+/* Send a daisy-chain-style CPP command packet. */
+static int cpp_daisy (struct parport *port, int cmd)
+{
+	unsigned char s;
+
+	parport_data_forward (port);
+	parport_write_data (port, 0xaa); udelay (2);
+	parport_write_data (port, 0x55); udelay (2);
+	parport_write_data (port, 0x00); udelay (2);
+	parport_write_data (port, 0xff); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_BUSY
+		  | PARPORT_STATUS_PAPEROUT
+		  | PARPORT_STATUS_SELECT
+		  | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: cpp_daisy: aa5500ff(%02x)\n",
+			 port->name, s);
+		return -ENXIO;
+	}
+
+	parport_write_data (port, 0x87); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: cpp_daisy: aa5500ff87(%02x)\n",
+			 port->name, s);
+		return -ENXIO;
+	}
+
+	parport_write_data (port, 0x78); udelay (2);
+	parport_write_data (port, cmd); udelay (2);
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE,
+			      PARPORT_CONTROL_STROBE);
+	udelay (1);
+	parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+	udelay (1);
+	s = parport_read_status (port);
+	parport_write_data (port, 0xff); udelay (2);
+
+	return s;
+}
+
+/* Send a mux-style CPP command packet. */
+static int cpp_mux (struct parport *port, int cmd)
+{
+	unsigned char s;
+	int rc;
+
+	parport_data_forward (port);
+	parport_write_data (port, 0xaa); udelay (2);
+	parport_write_data (port, 0x55); udelay (2);
+	parport_write_data (port, 0xf0); udelay (2);
+	parport_write_data (port, 0x0f); udelay (2);
+	parport_write_data (port, 0x52); udelay (2);
+	parport_write_data (port, 0xad); udelay (2);
+	parport_write_data (port, cmd); udelay (2);
+
+	s = parport_read_status (port);
+	if (!(s & PARPORT_STATUS_ACK)) {
+		DPRINTK (KERN_DEBUG "%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
+			 port->name, cmd, s);
+		return -EIO;
+	}
+
+	rc = (((s & PARPORT_STATUS_SELECT   ? 1 : 0) << 0) |
+	      ((s & PARPORT_STATUS_PAPEROUT ? 1 : 0) << 1) |
+	      ((s & PARPORT_STATUS_BUSY     ? 0 : 1) << 2) |
+	      ((s & PARPORT_STATUS_ERROR    ? 0 : 1) << 3));
+
+	return rc;
+}
+
+void parport_daisy_deselect_all (struct parport *port)
+{
+	cpp_daisy (port, 0x30);
+}
+
+int parport_daisy_select (struct parport *port, int daisy, int mode)
+{
+	switch (mode)
+	{
+		// For these modes we should switch to EPP mode:
+		case IEEE1284_MODE_EPP:
+		case IEEE1284_MODE_EPPSL:
+		case IEEE1284_MODE_EPPSWE:
+			return (cpp_daisy (port, 0x20 + daisy) &
+				PARPORT_STATUS_ERROR);
+
+		// For these modes we should switch to ECP mode:
+		case IEEE1284_MODE_ECP:
+		case IEEE1284_MODE_ECPRLE:
+		case IEEE1284_MODE_ECPSWE: 
+			return (cpp_daisy (port, 0xd0 + daisy) &
+				PARPORT_STATUS_ERROR);
+
+		// Nothing was told for BECP in Daisy chain specification.
+		// May be it's wise to use ECP?
+		case IEEE1284_MODE_BECP:
+		// Others use compat mode
+		case IEEE1284_MODE_NIBBLE:
+		case IEEE1284_MODE_BYTE:
+		case IEEE1284_MODE_COMPAT:
+		default:
+			return (cpp_daisy (port, 0xe0 + daisy) &
+				PARPORT_STATUS_ERROR);
+	}
+}
+
+static int mux_present (struct parport *port)
+{
+	return cpp_mux (port, 0x51) == 3;
+}
+
+static int num_mux_ports (struct parport *port)
+{
+	return cpp_mux (port, 0x58);
+}
+
+static int select_port (struct parport *port)
+{
+	int muxport = port->muxport;
+	return cpp_mux (port, 0x60 + muxport) == muxport;
+}
+
+static int assign_addrs (struct parport *port)
+{
+	unsigned char s, last_dev;
+	unsigned char daisy;
+	int thisdev = numdevs;
+	int detected;
+	char *deviceid;
+
+	parport_data_forward (port);
+	parport_write_data (port, 0xaa); udelay (2);
+	parport_write_data (port, 0x55); udelay (2);
+	parport_write_data (port, 0x00); udelay (2);
+	parport_write_data (port, 0xff); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_BUSY
+		  | PARPORT_STATUS_PAPEROUT
+		  | PARPORT_STATUS_SELECT
+		  | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: assign_addrs: aa5500ff(%02x)\n",
+			 port->name, s);
+		return 0;
+	}
+
+	parport_write_data (port, 0x87); udelay (2);
+	s = parport_read_status (port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
+		DPRINTK (KERN_DEBUG "%s: assign_addrs: aa5500ff87(%02x)\n",
+			 port->name, s);
+		return 0;
+	}
+
+	parport_write_data (port, 0x78); udelay (2);
+	last_dev = 0; /* We've just been speaking to a device, so we
+			 know there must be at least _one_ out there. */
+
+	for (daisy = 0; daisy < 4; daisy++) {
+		parport_write_data (port, daisy);
+		udelay (2);
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (1);
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+		udelay (1);
+
+		if (last_dev)
+			/* No more devices. */
+			break;
+
+		last_dev = !(parport_read_status (port)
+			     & PARPORT_STATUS_BUSY);
+
+		add_dev (numdevs++, port, daisy);
+	}
+
+	parport_write_data (port, 0xff); udelay (2);
+	detected = numdevs - thisdev;
+	DPRINTK (KERN_DEBUG "%s: Found %d daisy-chained devices\n", port->name,
+		 detected);
+
+	/* Ask the new devices to introduce themselves. */
+	deviceid = kmalloc (1000, GFP_KERNEL);
+	if (!deviceid) return 0;
+
+	for (daisy = 0; thisdev < numdevs; thisdev++, daisy++)
+		parport_device_id (thisdev, deviceid, 1000);
+
+	kfree (deviceid);
+	return detected;
+}