Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 188 insertions, 0 deletions

diff --git a/drivers/parisc/iosapic_private.h b/drivers/parisc/iosapic_private.h
new file mode 100644
index 000000000000..41e7ec2a44aa
--- /dev/null
+++ b/drivers/parisc/iosapic_private.h
@@ -0,0 +1,188 @@
+/* 
+ *    Private structs/constants for PARISC IOSAPIC support
+ *
+ *    Copyright (C) 2000 Hewlett Packard (Grant Grundler)
+ *    Copyright (C) 2000,2003 Grant Grundler (grundler at parisc-linux.org)
+ *    Copyright (C) 2002 Matthew Wilcox (willy at parisc-linux.org)
+ *
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+** This file is private to iosapic driver.
+** If stuff needs to be used by another driver, move it to a common file.
+**
+** WARNING: fields most data structures here are ordered to make sure
+**          they pack nicely for 64-bit compilation. (ie sizeof(long) == 8)
+*/
+
+
+/*
+** Interrupt Routing Stuff
+** -----------------------
+** The interrupt routing table consists of entries derived from
+** MP Specification Draft 1.5. There is one interrupt routing 
+** table per cell.  N- and L-class consist of a single cell.
+*/
+struct irt_entry {
+
+	/* Entry Type 139 identifies an I/O SAPIC interrupt entry */
+	u8 entry_type;
+
+	/* Entry Length 16 indicates entry is 16 bytes long */
+	u8 entry_length;
+
+	/* 
+	** Interrupt Type of 0 indicates a vectored interrupt, 
+	** all other values are reserved 
+	*/
+	u8 interrupt_type;
+
+	/* 
+	** PO and EL
+	** Polarity of SAPIC I/O input signals: 
+	**    00 = Reserved 
+	**    01 = Active high 
+	**    10 = Reserved 
+	**    11 = Active low 
+	** Trigger mode of SAPIC I/O input signals: 
+	**    00 = Reserved 
+	**    01 = Edge-triggered 
+	**    10 = Reserved 
+	**    11 = Level-triggered
+	*/
+	u8 polarity_trigger;
+
+	/* 
+	** IRQ and DEVNO
+	** irq identifies PCI interrupt signal where
+	**    0x0 corresponds to INT_A#, 
+	**    0x1 corresponds to INT_B#, 
+	**    0x2 corresponds to INT_C# 
+	**    0x3 corresponds to INT_D# 
+	** PCI device number where interrupt originates 
+	*/
+	u8 src_bus_irq_devno;
+
+	/* Source Bus ID identifies the bus where interrupt signal comes from */
+	u8 src_bus_id;
+
+	/* 
+	** Segment ID is unique across a protection domain and
+	** identifies a segment of PCI buses (reserved in 
+	** MP Specification Draft 1.5) 
+	*/
+	u8 src_seg_id;
+
+	/* 
+	** Destination I/O SAPIC INTIN# identifies the INTIN n pin 
+	** to which the signal is connected 
+	*/
+	u8 dest_iosapic_intin;
+
+	/* 
+	** Destination I/O SAPIC Address identifies the I/O SAPIC 
+	** to which the signal is connected 
+	*/
+	u64 dest_iosapic_addr;
+};
+
+#define IRT_IOSAPIC_TYPE   139
+#define IRT_IOSAPIC_LENGTH 16
+
+#define IRT_VECTORED_INTR  0
+
+#define IRT_PO_MASK        0x3
+#define IRT_ACTIVE_HI      1
+#define IRT_ACTIVE_LO      3
+
+#define IRT_EL_MASK        0x3
+#define IRT_EL_SHIFT       2
+#define IRT_EDGE_TRIG      1
+#define IRT_LEVEL_TRIG     3
+
+#define IRT_IRQ_MASK       0x3
+#define IRT_DEV_MASK       0x1f
+#define IRT_DEV_SHIFT      2
+
+#define IRT_IRQ_DEVNO_MASK	((IRT_DEV_MASK << IRT_DEV_SHIFT) | IRT_IRQ_MASK)
+
+#ifdef SUPPORT_MULTI_CELL
+struct iosapic_irt {
+        struct iosapic_irt *irt_next;  /* next routing table */
+        struct irt_entry *irt_base;             /* intr routing table address */
+        size_t  irte_count;            /* number of entries in the table */
+        size_t  irte_size;             /* size (bytes) of each entry */
+};
+#endif
+
+struct vector_info {
+	struct iosapic_info *iosapic;	/* I/O SAPIC this vector is on */
+	struct irt_entry *irte;		/* IRT entry */
+	u32	*eoi_addr;		/* precalculate EOI reg address */
+	u32	eoi_data;		/* IA64: ?       PA: swapped txn_data */
+	int	txn_irq;		/* virtual IRQ number for processor */
+	ulong	txn_addr;		/* IA64: id_eid  PA: partial HPA */
+	u32	txn_data;		/* CPU interrupt bit */
+	u8	status;			/* status/flags */
+	u8	irqline;		/* INTINn(IRQ) */
+};
+
+
+struct iosapic_info {
+	struct iosapic_info *	isi_next;	/* list of I/O SAPIC */
+	void __iomem *		addr;		/* remapped address */
+	unsigned long		isi_hpa;	/* physical base address */
+	struct vector_info *	isi_vector;	/* IRdT (IRQ line) array */
+	int			isi_num_vectors; /* size of IRdT array */
+	int			isi_status;	/* status/flags */
+	unsigned int		isi_version;	/* DEBUG: data fr version reg */
+};
+
+
+
+#ifdef __IA64__
+/*
+** PA risc does NOT have any local sapics. IA64 does.
+** PIB (Processor Interrupt Block) is handled by Astro or Dew (Stretch CEC).
+**
+** PA: Get id_eid from IRT and hardcode PIB to 0xfeeNNNN0
+**     Emulate the data on PAT platforms.
+*/
+struct local_sapic_info {
+	struct local_sapic_info *lsi_next;      /* point to next CPU info */
+	int                     *lsi_cpu_id;    /* point to logical CPU id */
+	unsigned long           *lsi_id_eid;    /* point to IA-64 CPU id */
+	int                     *lsi_status;    /* point to CPU status   */
+	void                    *lsi_private;   /* point to special info */
+};
+
+/*
+** "root" data structure which ties everything together.
+** Should always be able to start with sapic_root and locate
+** the desired information.
+*/
+struct sapic_info {
+	struct sapic_info	*si_next;	/* info is per cell */
+	int                     si_cellid;      /* cell id */
+	unsigned int            si_status;       /* status  */
+	char                    *si_pib_base;   /* intr blk base address */
+	local_sapic_info_t      *si_local_info;
+	io_sapic_info_t         *si_io_info;
+	extint_info_t           *si_extint_info;/* External Intr info      */
+};
+#endif
+