diff options
author | Robert Richter <robert.richter@amd.com> | 2008-12-09 01:21:32 +0100 |
---|---|---|
committer | Robert Richter <robert.richter@amd.com> | 2008-12-10 14:20:18 +0100 |
commit | 6dad828b76c7224a22ddc9ce7aa495d994f03b31 (patch) | |
tree | 364de7a3efd56d60c0742145e3a8d3d4f73bcde4 /drivers/oprofile/buffer_sync.c | |
parent | e09373f22e76cc048ca5fe10a9ff9012f5d64309 (diff) | |
download | linux-6dad828b76c7224a22ddc9ce7aa495d994f03b31.tar.bz2 |
oprofile: port to the new ring_buffer
This patch replaces the current oprofile cpu buffer implementation
with the ring buffer provided by the tracing framework. The motivation
here is to leave the pain of implementing ring buffers to others. Oh,
no, there are more advantages. Main reason is the support of different
sample sizes that could be stored in the buffer. Use cases for this
are IBS and Cell spu profiling. Using the new ring buffer ensures
valid and complete samples and allows copying the cpu buffer stateless
without knowing its content. Second it will use generic kernel API and
also reduce code size. And hopefully, there are less bugs.
Since the new tracing ring buffer implementation uses spin locks to
protect the buffer during read/write access, it is difficult to use
the buffer in an NMI handler. In this case, writing to the buffer by
the NMI handler (x86) could occur also during critical sections when
reading the buffer. To avoid this, there are 2 buffers for independent
read and write access. Read access is in process context only, write
access only in the NMI handler. If the read buffer runs empty, both
buffers are swapped atomically. There is potentially a small window
during swapping where the buffers are disabled and samples could be
lost.
Using 2 buffers is a little bit overhead, but the solution is clear
and does not require changes in the ring buffer implementation. It can
be changed to a single buffer solution when the ring buffer access is
implemented as non-locking atomic code.
The new buffer requires more size to store the same amount of samples
because each sample includes an u32 header. Also, there is more code
to execute for buffer access. Nonetheless, the buffer implementation
is proven in the ftrace environment and worth to use also in oprofile.
Patches that changes the internal IBS buffer usage will follow.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Diffstat (limited to 'drivers/oprofile/buffer_sync.c')
-rw-r--r-- | drivers/oprofile/buffer_sync.c | 65 |
1 files changed, 25 insertions, 40 deletions
diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index 944a5832d9e4..737bd9484822 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -268,18 +268,6 @@ lookup_dcookie(struct mm_struct *mm, unsigned long addr, off_t *offset) return cookie; } -static void increment_tail(struct oprofile_cpu_buffer *b) -{ - unsigned long new_tail = b->tail_pos + 1; - - rmb(); /* be sure fifo pointers are synchronized */ - - if (new_tail < b->buffer_size) - b->tail_pos = new_tail; - else - b->tail_pos = 0; -} - static unsigned long last_cookie = INVALID_COOKIE; static void add_cpu_switch(int i) @@ -331,26 +319,25 @@ static void add_trace_begin(void) #define IBS_FETCH_CODE_SIZE 2 #define IBS_OP_CODE_SIZE 5 -#define IBS_EIP(cpu_buf) ((cpu_buffer_read_entry(cpu_buf))->eip) -#define IBS_EVENT(cpu_buf) ((cpu_buffer_read_entry(cpu_buf))->event) /* * Add IBS fetch and op entries to event buffer */ -static void add_ibs_begin(struct oprofile_cpu_buffer *cpu_buf, int code, - struct mm_struct *mm) +static void add_ibs_begin(int cpu, int code, struct mm_struct *mm) { unsigned long rip; int i, count; unsigned long ibs_cookie = 0; off_t offset; + struct op_sample *sample; - increment_tail(cpu_buf); /* move to RIP entry */ - - rip = IBS_EIP(cpu_buf); + sample = cpu_buffer_read_entry(cpu); + if (!sample) + goto Error; + rip = sample->eip; #ifdef __LP64__ - rip += IBS_EVENT(cpu_buf) << 32; + rip += sample->event << 32; #endif if (mm) { @@ -374,8 +361,8 @@ static void add_ibs_begin(struct oprofile_cpu_buffer *cpu_buf, int code, add_event_entry(offset); /* Offset from Dcookie */ /* we send the Dcookie offset, but send the raw Linear Add also*/ - add_event_entry(IBS_EIP(cpu_buf)); - add_event_entry(IBS_EVENT(cpu_buf)); + add_event_entry(sample->eip); + add_event_entry(sample->event); if (code == IBS_FETCH_CODE) count = IBS_FETCH_CODE_SIZE; /*IBS FETCH is 2 int64s*/ @@ -383,10 +370,17 @@ static void add_ibs_begin(struct oprofile_cpu_buffer *cpu_buf, int code, count = IBS_OP_CODE_SIZE; /*IBS OP is 5 int64s*/ for (i = 0; i < count; i++) { - increment_tail(cpu_buf); - add_event_entry(IBS_EIP(cpu_buf)); - add_event_entry(IBS_EVENT(cpu_buf)); + sample = cpu_buffer_read_entry(cpu); + if (!sample) + goto Error; + add_event_entry(sample->eip); + add_event_entry(sample->event); } + + return; + +Error: + return; } #endif @@ -530,33 +524,26 @@ typedef enum { */ void sync_buffer(int cpu) { - struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu); struct mm_struct *mm = NULL; struct mm_struct *oldmm; struct task_struct *new; unsigned long cookie = 0; int in_kernel = 1; sync_buffer_state state = sb_buffer_start; -#ifndef CONFIG_OPROFILE_IBS unsigned int i; unsigned long available; -#endif mutex_lock(&buffer_mutex); add_cpu_switch(cpu); - /* Remember, only we can modify tail_pos */ - cpu_buffer_reset(cpu); -#ifndef CONFIG_OPROFILE_IBS - available = cpu_buffer_entries(cpu_buf); + available = cpu_buffer_entries(cpu); for (i = 0; i < available; ++i) { -#else - while (cpu_buffer_entries(cpu_buf)) { -#endif - struct op_sample *s = cpu_buffer_read_entry(cpu_buf); + struct op_sample *s = cpu_buffer_read_entry(cpu); + if (!s) + break; if (is_code(s->eip)) { switch (s->event) { @@ -575,11 +562,11 @@ void sync_buffer(int cpu) #ifdef CONFIG_OPROFILE_IBS case IBS_FETCH_BEGIN: state = sb_bt_start; - add_ibs_begin(cpu_buf, IBS_FETCH_CODE, mm); + add_ibs_begin(cpu, IBS_FETCH_CODE, mm); break; case IBS_OP_BEGIN: state = sb_bt_start; - add_ibs_begin(cpu_buf, IBS_OP_CODE, mm); + add_ibs_begin(cpu, IBS_OP_CODE, mm); break; #endif default: @@ -600,8 +587,6 @@ void sync_buffer(int cpu) atomic_inc(&oprofile_stats.bt_lost_no_mapping); } } - - increment_tail(cpu_buf); } release_mm(mm); |